UsersGuide-Meteor Aura32
Contents
1. Instructions AURA 32 Center pi ece Thank you for selecting AVAA 32 Centerpiece Light Effect Before installation and for your safety and better use of this product please read this user s manual carefully and follow the instructions to protect yourself and others AURA 32 Centerpiece Light Effect adopts advanced design technology using high grade optical lenses a powerful long tested and reliable HMI 575 lamp to generate high precision and very bright light output 16 pieces of various dichroic filters color beams and 16 pieces of white beams can create a multitude of color configurations patterns including a mirror ball style effect to satisfy any appetite for excitement in any club for years to come The controller supplied with the unit has 8 built in programs to chose from controlling the 32 beams Also the controller incorporates Black Out Audio Auto functions Speed and Pause etc SPECIFICATIONS Voltage 220V 60hz Controller 120v 60hz Power 850W Lamp HMI 575 OSRAM IMPORT Resistance gt 2M Control Signal Dedicated Controller Color 16 Colors 16 White Colors Size 44 wide x 26 high Weight 160 Ibs unboxed SAFETY INSTALLATION INSTRUCTION Manufacturer will not accept any liability for damages or bodily harm resulting from improper installation or unauthorized modifications to the device Every person involved with installation operation and maintenance of this device must be qualifie2. T touch the lamp with bare hands Replace the lamp Cover the lamp housing Restart the device DO NOT look directly into the lamp to avoid eye injury Please use 10A 250V fuse OPERATION INSTRUCTION Please use the following steps to start the unit up 1 Install the AURA 32 in the desire and safe location 2 Plug the control cable supplied with the controller into the light fixture the cable is aprox 30ft in length 3 Turn the power on 4 The lamp will come on first After approximately 20 seconds the electronics will power on and the fixture will go thru an entire RESET mode Once this is completed unit is ready to operate CONTROLLER OPERATION 1 Push the RESET button to reset the device You can use RESET Function to reset the unit without turning the power OFF to the whole device 2 Push START key 3 Push the PROGRAM key and choose one of the pre programs from 1 thru 8 4 Move SPEED Fader up or down to change the effect speed 5 Move TIME Fader up or down to change the program speed AUDIO 1 Push AUDIO button In this mode the Audio Mic will sound activate the unit to change programs and randomly pick movement 2 Push again to cancel PAUSE 1 Push PAUSE button if you want the program to be stopped paused temporarily on a particular scene 2 The letter H Hold will be display in the program window 3 Push again to cancel MLSC MIC METEOR LIGHT and SOUND CO In
3. c 8000 MADISON PIKE MADISON ALA 35756 256 461 8000 FAX 256 461 7708 www meteor global com www meteor usa com e mail sales meteor usa com
4. d familiar with the instrument functions and follow the instruction manual Most of damages occur by improper installation and operation there after Before installation please open and inspect the equipment for any possible damages caused during transportation This product is for indoor use ONLY Please install the device in a well ventilated area Please check that the fan and fan safety grill are not blocked Install the fixture with proper hanging devises For safety always use Safety cables Handle the power cord and all electrical connections to the mains with caution Make sure that you have the correct operating voltage as stated on the unit During installation and before connecting the device to the mains make sure the main power is turned OFF Make sure that the device is properly grounded to avoid electric shock DO NOT connect this device to a Dimmer Pack DONOT switch the devise ON OFF is short intervals as this will reduce lamp life and also will cause damage to the lamp igniter During initial start up some smoke or smell may arise This is normal process with new devices and does not mean that the device is defective FOR YOUR SAFETY before replacing the lamp wear safety glasses and gloves as the lamp might explode Make sure that the main power is OFF and the lamp is cold as the operating temperature of the lamp could be over 200C Open the lamp housing DO NO
Download Pdf Manuals
Related Search