rackmount lcd console kvm switch user manual
Contents
1. 8 Press the red Power button on the console see Operation to turn the LCD screen on 9 When shutting down the switch Press the red Power button on the console to turn the LCD screen off Close the LCD panel so the front handle locks Auto lock e Release the guide lock on the side of the bracket assembly o moo e Gently push the control platform all the way in to the rack so the power is Unid turned off to the switch Front handle lock OPERATION The Rackmount LCD Console KVM Switch allows you to select and monitor up to eight connected computers two ways by simply pressing corresponding buttons or by using a mouse or the touch pad to navigate through the on screen display which also provides access to the majority of the control and configuration options Buttons Using the buttons is quick and easy as they are positioned just above the keyboard on the control platform Inthe highlighted grouping on the right are the PC1 through PC8 buttons used to select and monitor a connected computer plus the red RESET button which allows you to re boot e In the highlighted grouping on the left are another six buttons from left to right AUTO adjusts the LCD display MENU displays the OSD main menu LEFT and RIGHT re position the LCD image EXIT leaves the currently displayed screen POWER red turns the LCD on and off Also located on the control platform is the2. This symbol on the product or its packaging indicates that this product shall not be treated as household waste Instead it should be taken to an applicable collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative consequences to the environment and human health which could otherwise be caused by inappropriate waste handling of this product If your equipment contains easily removable batteries or accumulators dispose of these separately according to your local requirements The recycling of materials will help to conserve natural resources For more detailed information about recycling of this product contact your local city office your household waste disposal service or the shop where you purchased this product n countries outside of the EU If you wish to discard this product contact your local authorities and ask for the correct manner of disposal DEUTSCH Dieses auf dem Produkt oder der Verpackung angebrachte Symbol zeigt an dass dieses Produkt nicht mitdem Hausm ll entsorgt werden darf In bereinstimmung mit der Richtlinie 2002 96 EG des Europ ischen Parlaments und des Rates ber Elektro und Elektronik Altger te WEEE darf dieses Elektroger t nicht im normalen Hausm ll oder dem Gelben Sack entsorgt werden Wenn Sie dieses Produkt entsorgen m chten bringen Sie es bitte zur Verkaufsstelle zur ck oder zum Recycling Sam
3. o en el domicilio de IC Intracom M xico S A P l de C V junto con los accesorios contenidos en su empaque acompa ado de su p liza debidamente llenada y sellada por la casa vendedora indispensable el sello y fecha de compra donde lo adquiri o bien la factura o ticket de compra original donde se mencione claramente el modelo n mero de serie cuando aplique y fecha de adquisici n Esta garant a no es v lida en los siguientes casos Si el producto se hubiese utilizado en condiciones distintas a las normales si el producto no ha sido operado conforme a los instructivos de uso o si el producto ha sido alterado o tratado de ser reparado por el consumidor o terceras personas North amp South America Asia amp Africa Europe IC Intracom Americas IC Intracom Asia IC Intracom Europe 550 Commerce Blvd 4 E No 77 Sec 1 Xintai 5th Rd L hbacher Str 7 Oldsmar FL 34677 Xizhi Dist New Taipei City 221 D 58553 Halver USA Taiwan Germany All trademarks and trade names are the property of their respective owners Alle Marken und Markennamen sind Eigentum Ihrer jeweiligen Inhaber Todas las marcas y nombres comerciales son propiedad de sus respectivos due os Toutes les marques et noms commerciaux sont la propri t de leurs propri taires respectifs Wszystkie znaki towarowe i nazwy handlowe naleza do ich wiascicieli Tutti i marchi registrati e le dominazioni commerciali sono di proprieta dei loro rispettivi proprietari INTEL
4. przeznaczonych do recyklingu ITALIANO Questo simbolo sui prodotto o sulla relativa confezione indica che il prodotto non va trattato come un rifiuto domestico In ottemperanza alla Direttiva UE 2002 96 EC sui rifiuti di apparecchiature elettriche ed elettroniche RAEE questa prodotto elettrico non deve essere smaltito come rifiuto municipale misto Si prega di smaltire il prodotto riportandolo al punto vendita o al punto di raccolta municipale locale per un opportuno riciclaggio NETWORK SOLUTIONS FEDERAL COMMUNICATIONS COMMISSION REGULATORY STATEMENT FCC Class B This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of Federal Communications Commission FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna Increase the separation betwe
5. touch pad below the space bar which can be used instead of a mouse Ta on screen navigation On Screen Display OSD All computer control and switching procedures can be performed using the On Screen Display OSD To display the main menu press Ctrl on the keyboard twice Ifthe OSD menu is set as Console locked you need to input a password each time the main menu appears If no password has been set just press Enter to display the main menu There are two passwords in the OSD the user password which is not pre set and the factory password which is INTELLINET e The OSD always starts at the List screen with the highlight bar in the same position as when the OSD was exited Navigation To exit the OSD press Esc To move up and down through the menu one line at a time use the Up and Down Arrow keys If there are more listed entries than what can appear on the main screen the screen will scroll To activate a port move the highlight bar to it and press Enter After you select a port the OSD menu automatically disappears and the port currently selected is indicated Main Screen Headings PN This column lists the port numbers for all the CPU ports on the installation The simplest way to access a particular computer is to move the highlight bar to it then press Enter QV If a port has been selected for Quick View scanning displays in this column PC If a computer is
6. LINET TWORK SOLUTIONS ETWORK SOLUTIONS ZINTELLINET NETWORK SOLUTIONS O IC Intracom All rights reserved Intellinet is a trademark of IC Intracom registered in the U S and other countries
7. RACKMOUNT LCD CONSOLE KVM SWITCH USER MANUAL MODELS 506540 50 059 90 1 2 50 219 INTELLINET NETWORK SOLUTIONS INT 506540 507059 507 172 507219 UM ML 1 0914 07 0 LI CFCA FE SLULINA e LI RA ga SUD SUR B pe Y i il SPA li ge a e AN NA YN SL war u n ie gu gu na Ma mem u C K f 0 i E BU E J V KY m W WN SY l e TIIVA INN e li e Y Mil a Wed lS Ente eR Ru SR S IN WETTE I VV ER S RN uM y aus E WESS Wi GA INTRODUCTION Thank you for purchasing the Intellinet Network Solutions Rackmount LCD Console KVM Switch Model 506540 507059 507172 or 507219 For a full list of specifications refer to the datasheet available at intellinet network com Package Contents Rackmount LCD Console KVM Switch Model 506540 8 Port Rackmount LCD Console KVM Switch 17 1 8 m 6 ft PS 2 and USB combo cables 8 Model 507059 16 Port Rackmount LCD Console KVM Switch 17 1 8 m 6 ft PS 2 and USB combo cables 16 Model 507172 8 Port Rackmount LCD Console KVM Switch 19 1 8 m 6 ft PS 2 and USB combo cables 8 Model 507219 16 Port Rackmount LCD Console KVM Switch 19 1 8 m 6 ft PS 2 and USB combo cables 16 Rear bracket and extension kit e KVM switch module Power adapter User manual INSTALLATION To install the Rackmount LCD Console KVM Switch in a rack unit begin by removing the brackets if the device is already assembled A For boththe left and right
8. bracket assemblies screw the front of the bracket to the rack then extend the bracket and attach it to the back of the rack 3 Move the rear attachment brackets along the slide bars until they contact the back of the switch Iu isn 2 Carefully place the switch on the mounted brackets and loosely attach the front of the switch to the front of the rack using the included screws 4 Attach the bars to the back of the switch SINTELLINET WORK SOLUTIONS du VERS E Vi DD VES 5 Using the included power adapter connect the 12 VDC jack on the rear panel of the switch module above to an A C outlet NOTE When the control platform is pulled out to its full extension the bracket guides lock automatically and the power is turned on to the console 6 Using the included 1 8 m combo cables connect the HD15 port connectors on the rear panel of the switch module either to PS 2 ports or to USB ports on the computers to be included in the configuration NOTE The Rackmount LCD Console KVM Switch features hot swap capability Computers can be connected and disconnected without turning off the switch Be sure however that the control platform is powered on before powering on any of the connected computers and always plug in the mouse before the keyboard 7 To open the control platform and display the LCD screen squeeze the handle to release the front lock and lift up The LCD panel can be tilted back as far as 120 degrees
9. en the equipment and the receiver Connect the equipment to an outlet on a circuit different from the receiver e Consult the dealer or an experienced radio TV technician for help CE R amp TTE English This device complies with the requirements of R amp TTE Directive 1999 5 EC The Declaration of Conformity for this product is available at intellinet network com Deutsch Dieses Ger t enspricht der Direktive R amp TTE Direktive 1999 5 EC Die Konformit tserkl rung f r dieses Produkt finden Sie unter intellinet network com Espa ol Este dispositivo cumple con los requerimientos de la Directiva R amp TTE 1999 5 EC La declaraci n de conformidad para este producto esta disponible en intellinet network com Fran ais Cet appareil satisfait aux exigences de la directive R amp TTE 1999 5 CE La D claration de Conformit pour ce produit est disponible l adresset intellinet network com Polski Urzadzenie spetnia wymagania dyrektywy R amp TTE 1999 5 EC Deklaracja zgodno ci dostepna jest na stronie internetowej producenta intellinet network com Italiano Questo dispositivo conforme alla Direttiva 1999 5 EC R amp TTE La dichiarazione di conformit per questo prodotto disponibile al intel CE FC Z NETWORK SOLUTIONS WARRANTY INFORMATION ENGLISH For warranty information go to intellinet network com warranty DEUTSCH Garantieinformationen finden Sie unter intellinet network com warranty ESPANOL Si desea obtene
10. melpunkt Ihrer Gemeinde ESPANOL Este s mbolo en el producto o su embalaje indica que el producto no debe tratarse como residuo dom stico De conformidad con la Directiva 2002 96 CE de la UE sobre residuos de aparatos el ctricos y electr nicos RAEE este producto el ctrico no puede desecha se con el resto de residuos no clasificados Desh gase de este producto devolvi ndolo a su punto de venta o a un punto de recolecci n municipal para su reciclaje FRANCAIS Ce symbole sur le produit ou son emballage signifie que ce produit ne doit pas tre trait comme un d chet m nager Conform ment la Directive 2002 96 EC sur les d chets d quipements lectriques et lectroniques DEEE ce produit lectrique ne doit en aucun cas tre mis au rebut sous forme de d chet municipal non tri Veuillez vous d barrasser de ce produit en le renvoyant son point de vente ou au point de ramassage local dans votre municipalit des fins de recyclage POLSKI Je li na produkcie lub jego opakowaniu umieszczono ten symbol w wczas w czasie utylizacji nie wolno wyrzuca tego produktu wraz z odpadami komunalnymi Zgodnie z Dyrektyw Nr 2002 96 WE w sprawie zu ytego sprz tu elektrycznego i elektronicznego WEEE niniejszego produktu elektrycznego nie wolno usuwa jako nie posortowanego odpadu komunalnego Prosimy o usuniecie niniejszego produktu poprzez jego zwrot do punktu zakupu lub oddanie do miejscowego komunalnego punktu zbi rki odpad w
11. powered on and on line displays in this column NAME Any name assigned to a computer appears in this column SINTELLINET ENGLISH Functions OT The OSD can be controlled and re configured using the LI ST AL L functions described below F1 GOTO GOTO allows you to switch directly to a port by keying in either the computer s name or its port number PN To use the name highlight NAME press Enter input the name of the computer then press Enter to confirm If there is a matching name it will display on the screen Press Enter to switch to that port To use PN method highlight PN press Enter input the port number then press Enter to switch If the port number is invalid it will prompt you to try again To return to the main menu press Esc F2 SCAN This allows you to automatically scan from the current selected port through any active and connected computers While scanning a small window on the screen indicates the current port number To stop scanning and continue viewing the last computer scanned press the space bar The scan interval can be set by the user F3 LIST This lets you broaden or narrow the range of ports s F 3 A displayed on the main screen Many of the OSD functions d described below only operate on the computers listed on the main screen selected by using this Yen e ALL lists all of the ports in the configuration e OVIEW lists only the port
12. r informaci n sobre la garant a visite intellinet network com warranty FRANCAIS Pour consulter les informations sur la garantie visitez intellinet network com warranty POLSKI Informacje dotyczace gwarancji znajduja sie na stronie intellinet network com warranty ITALIANO Per informazioni sulla garanzia accedere a intellinet network com warranty EN M XICO P liza de Garant a Intellinet Datos del importador y responsable ante el consumidor IC Intracom M xico S A PI de C V Av Interceptor Poniente 73 Col Parque Industrial La Joya Cuautitlan Izcalli Estado de M xico C P 54730 M xico Tel 55 1500 4500 La presente garant a cubre este producto por 3 a os contra cualquier defecto de fabricaci n en sus materiales y mano de obra bajo las siguientes condiciones 1 Todos los productos a que se refiere esta garant a ampara su cambio f sico sin ning n cargo para el consumidor 2 El comercializador no tiene talleres de servicio debido a que los productos que se garantizan no cuentan con reparaciones ni refacciones ya que su garant a es de cambio f sico 3 Lagarant a cubre exclusivamente aquellas partes equipos o sub ensambles que hayan sido instaladas de f brica y no incluye en ning n caso el equipo adicional o cualesquiera que hayan sido adicionados al mismo por el usuario o distribuidor Para hacer efectiva esta garant a bastara con presentar el producto al distribuidor en el domicilio donde fue adquirido
13. s that have been selected as Quick View ports e POWERED ON lists only the ports that have their attached computers powered on POWERED ON QVIEW lists only the ports that have their attached computers powered on and have been selected as Quick View ports OVIEW NAME lists only the ports that have been selected as Quick View ports and have been assigned names e NAME lists only the ports that have been assigned names Highlight a function and press Enter When the confirmation icon displays alongside your selection press Enter to return to the OSD main screen with the newly formulated list displayed F4 QV This lets you select a port as Quick View Highlight a port and press F4 The A icon displays to confirm your selection Press F4 again and the icon disappears F5 EDIT This lets you create or edit the name of a port Press F5 and a pink edit box will appear on the screen Input a name press Enter and the port name will be set and displayed F6 SET This lets you configure the OSD menu Highlight an option and press Enter to change settings e CHANNEL DISPLAY MODE offers three options for what appears in the tip window PN NAME PN port number only NAME e CHANNEL DISPLAY DURATION offers two options for the length of time the tip window remains on the screen 3 SECONDS ALWAYS ON e CHANNEL DISPLAY POSITION lets you re position the tip window When the window appears on the screen
14. use the arrow keys to move it then press Enter to set the new position SCAN DURATION offers eight options for the amount of time each connected computer is scanned ranging from 3 to 60 seconds SET PASSWORD lets you change the current password as directed on screen e CLEAR THE NAME LIST lets you remove any names assigned to the ports NOTE This requires a password RESTORE DEFAULT VALUE lets you return to the default settings NOTE This requires a password The user password will be cleared but not the factory password e LOCK CONSOLE means you cannot switch or scan once this function is activated neither by using the PC1 PC8 push buttons on the keyboard nor the OSD Selecting this same option when the console is locked will unlock it NOTE Both of these options require a password Power On Off and Reboot When you re ready to stow the switch after use follow the steps in Step 9 of Installation If you need to cut power to the control platform for example to reboot 1 Turn off the power to all connected computers 2 Disconnect the power adapter from the switch 3 After 10 seconds or more re connect power to the switch and turn it on 4 Turn on the connected computers OV PC NAME INTELLINET WORK SOLUTION WASTE ELECTRICAL amp ELECTRONIC EQUIPMENT Disposal of Electric and Electronic Equipment applicable in the European Union and other European countries with separate collection systems ENGLISH
Download Pdf Manuals
Related Search