User Manual v 6.0 Voting RF550
Contents
1. o Do not alter this product or modify any parts Alternation or modification can cause fire or electronic shock TRIUMPH BOARD a s Page 4 of 19 TRIUMPH BOARD One ldea Ahead Safety Information Continue WARNING o Do not open or alter the casing of this product Electric shock or injury may result o Do not leave this product or any of its accessories on the floor to avoid someone break it when stepping on it or injured by tripping on it o Do not operate this product in a location with high temperature or high humidity CAUTION This product must be disposed in accordance with the relevant federal state and local laws and regulations Avoid fire and heat source above 100 C Do not position this product in a location where it is unstable Do not place this product in a hot humid or dusty environment Prolonged exposure to these adverse conditions may cause fire or electric shock When this product is not used over an extended period of time take the batteries out from clickers Otherwise the batteries may leak Do not use the leaked batteries If battery fluid leakage occurs If the battery fluid is leaking from the battery do not touch the fluid with your bare hands If battery fluid gets into your eyes it can cause blindness and so immediately flush your eyes with clean water without rubbing them and seek medical attention immediately If battery fluid gets onto your body or clothes i2. 7 Setup Procedure 7 1 Software setup 1 Load the TB Vote v5 Software CD ROM into the PC 2 Double click TB Vote v5 exe to automatically start the installation process 3 When the installation process is completed click Finish 7 2 Hardware setup Prepare the unit before starting the setup process 1 Connect the wireless receiver to the PC If you have not already performed the procedure for 7 1 Software setup perform that first USB port TRIUMPH BOARD a s Page 15 of 19 TRIUMPH BOARD One ldea Ahead 7 3 Connecting environment The signal reception quality of the product varies based on the operating environment Try to use in environments where microwave ovens and other devices that emit electrical waves are not in the vicinity Cement and wooden walls absorb electrical waves and lower the signal reception sensitivity To improve the signal reception environment use in a location that is free of objects blocking the signals TRIUMPH BOARD a s Page 16 of 19 TRIUMPH BOARD One ldea Ahead 8 Appendix 8 1 Troubleshooting First check adjustments and handling methods and check for poor cable connections Those are often the causes of problems when nothing is actually broken Connection problems If it is connected correctly the LED receiver connected is fully lit See page 10 to the PC correctly If it is not fully lit try disconnecting the wireless r
3. TRIUMPH BOARD a s Page 18 of 19 TRIUMPH BOARD One Idea Aheaa 9 Repair Service and Contacts Please contact your local supplier for the warranty and technical service or find all warranty conditions and service partners on our website www triumphboard com For any questions please email us to info triumphboard com TRIUMPH BOARD a s Neklanova 122 15 128 00 Praha 2 Czech Republic EU Phone 420 224 910 221 Fax 420 224 910 218 E mail info triumphboard com www triumphboard com Notices Every effort hasbeen made to ensure all information contained in this user guide iscorect but the accuracy orcompleteness is not guaranteed Before using this product you must evaluate itand determine if it is suitable for your intended application You assume all nsks and lia bility associated with such use Any statements related to this product which isnot contained in this manual orany contrary statements contained on your purchase order shall have no force of effect unless expressly agreed upon in wnting by thiscompany Without this company pemission reproduction or repnnting this user guide or any part Is prohibited The contents of this user guide are subject to change without prior notice PLEASE see our website www triumphboard com for updates and fresh product information in the product and support sections TRIUMPH BOARD a s Page 19 of 19
4. to 500 users The system includes in addition to a USB receiver a carry case and 25 student clickers as well as a teacher s presenter s key pad for remote control of the voting TRIUMPH BOARD a s Page 7 of 19 TRIUMPH BOARD One ldea Ahead 3 Technical specification TRIUMPH BOARD Voting RF550 EAN 8592580081576 Teacher and Student Keypad EAN Dimensions LCD Screen Dimensions Weight Key Buttons Battery Requirement Transmission Distance Power Saving Mode Wavelength ID settings range Channel settings range USB PC Receiver EAN Dimensions Power Weight Transmission Distance Receiving Angle Connection RF Wavelength Temperature Humidity 8592580081033 8592580081637 91 mm x 55 mm x 8 mm 16 mm x 37 mm 38g with batteries Student keypad 15 buttons Teacher keypad 15 buttons Japanese batteries R2032 incl 50 m 30 second go to sleep mode 2 4GHz 1 to 1000 1 to 63 8592580081965 62 mm x 30 mm x 10 mm USB Port 15g 50 m 360 USB Port 2 4 GHz Operation 5 to 35 C Storage 10 to 45 C Operation Storage 20 to 80 no condensation TRIUMPH BOARD a s Page 8 of 19 TRIUMPH BOARD One laea Anead 4 Package Content After unpacking make sure that all of the following parts are included Item Description Quantity 1 Teacher unit 1 2 Student unit 25 3 Wireless receiver 1 4 CR2032 Lithium battery 52 5 Pack
5. TRIUMPH BOARD One ldea Aheaa User Manual v 6 0 February 2014 Voting RF550 TRIUMPH BOARD TRIUMPH BOARD a s Neklanova 122 15 128 00 Praha 2 Czech Republic European Union www triumphboard com TRIUMPH BOARD One ldea Ahead DECLARATION OF CONFORMITY We TRIUMPH BOARD a s Neklanova 122 15 128 00 Praha 2 Declare under sole responsibility that the product TRIUMPH BOARD Voting System RF550 25 1 RF550 teacher student clicker and USB Receiver EAN 8592580081576 8592580081033 8592580081637 8592580081965 Is in conformity of essential requirements of EU directives EU Standards EN 301 489 1 V1 8 1 EN 301 489 3 V1 4 1 EN 300 440 1 V1 5 1 EN 300 440 2 V1 3 1 EN 60950 1 2006 A11 2009 A1 2010 A12 2011 Place of Issue Prague Datum of issue 9 January 2013 Ing Ond ej Kry p n Chairman of the Board of Directors Note Translation from original CE TRIUMPH BOARD a s Page 2 of 19 TRIUMPH BOARD One Idea Aheaa TABLE OF CONTENT De MO MUO Mice caters ise toca cate tee ettoeceten E ENEA E 4 2 Product description ccccceeccceececeeeeceeeeceeeeceeeeseeeeseeeseueeseueeseeeseueessueeseueeseueesueeseueeseueeseneesaes 7 P TEAN SDS CMIC AOI ae saeco aceesesecescescdaescunsdsatexecdeqcerescaoresssdcesaanedeercansdsataxaqdcasezeceaane sesdeeieneedzeece 8 Ay ACK aCe OMe Ml ceczctcs terete E E 9 5 Names OF Pals and Their PUNGCHONS seivicscecccccnascncvievesevesswarcusseseee
6. age Box 1 6 TRIUMPBOARD Vote Software 1 7 Startup Guide 1 3 4 6 7 TRIUMPH BOARD a s Page 9 of 19 TRIUMPH BOARD One ldea Ahead 5 Names of Parts and Their Functions 5 1 Instructor unit Student unit TRIUMPH BOARIO 2 1 Key buttons Various functions are assigned to these key buttons The icons printed on the buttons are different for the instructor unit and student unit 2 Battery compartment Use two CR2032 lithium batteries For details see page 13 14 TRIUMPH BOARD a s Page 10 of 19 TRIUMPH BOARD One laea Anead 5 2 Wireless receiver 1 LED1 green a Flashing Standby b Quick flashing while LED2 is flashing Receiving of transmission from instructor unit or student unit 2 LED2 green a Flashing Waiting for transmission from instructor unit or student unit 3 LED3 red a Fully lit Normal status TRIUMPH BOARD a s Page 11 of 19 TRIUMPH BOARD One Idea Ahead 6 Operating Procedure This chapter describes the basic operating procedures for the Voting System 6 1 Basic operation 6 1 1 Button functions for instructor unit The button functions are assigned as shown in the table below These functions are enabled in classroom mode only TRIUMPH BOARD Icon Function leon Function Icon Function Previous Question Move Up eal n iy Scoreboard Show Hide 4 Not Assigned fae Move Left fos Entry Key Move right ya
7. eceiver and connecting it again Was setup performed in Perform setup in the correct order the correct order For details of the setup procedure see 7 Setup Procedure on page 14 of this User s Guide Is the setup Uninstall the setup software and software installed then install it again For details of correctly the setup procedure see 7 1 Software setup on page 14 of this The wireless receiver uses the 2 4 transmitters or other GHz ISM band which does not wireless devices placed require permission for usage Other in the vicinity of the wireless devices may be causing VOTING SYSTEM an unstable connection Use the VOTING SYSTEM away from Is there a microwave This product is prone to oven transmitter or other jelectromagnetic interference Use device that generates the VOTING SYSTEM away from electromagnetic devices that generate this type of Is the remaining Change the batteries See page battery power low 13 Are there any objects Communication quality will drop if placed in the there are any objects between the communication path wireless receiver and between the devices instructor student unit Either remove the obstructing objects or change the location of the devices Contact Technical Support TRIUMPH BOARD a s Page 17 of 19 TRIUMPH BOARD One hea Aheaa 8 2 Replaceable Parts 1 CR2032 Lithium battery For details on obtaining them contact your dealer or a support centre
8. h Uys ene Next Question Question List a cilia Move Down Show Hide The button assignments cannot be set by the user Show Response Result TRIUMPH BOARD a s Page 12 of 19 TRIUMPH BOARD One ldea Ahead 6 1 2 Button functions for student unit The button functions are assigned as shown in the table below These functions are enabled in classroom mode only UMIPFPH BOAR Icon Function Icon Function Icon Function Not assigned Send answer Clearing of entry Mode Entry of 1 or A Entry of aC eer Entry of 4 or D Entry of 5 or E Entry of 7 or QG Entry of O or J Entry of IN gt Next Question The button assignments cannot be set by the user Entry of Previous Question JE TRIUMPH BOARD a s Page 13 of 19 TRIUMPH BOARD One laea Anead 6 2 Replacing the batteries 1 Use a Phillips head screwdriver to turn the screw on the rear side counter clockwise Once the battery cover becomes slightly raised lift it up to remove 2 Remove the old batteries and load new batteries CR2032 size batteries 3 Refer to the figure below and be careful not to mistake the and ends of the batteries 4 Return the cover to its original position and retighten the screw by turning it clockwise with a Phillip head screwdriver TRIUMPH BOARD a s Page 14 of 19 TRIUMPH BOARD One ldea Ahead
9. personal injury and or soiling of the surrounding area due to batteries bursting or leaking fluid If not using the product for an extended period of time remove the batteries to prevent leakage of battery fluid Otherwise battery fluid can leak Do not install this product where it may be exposed to direct sunlight near heating equipment or near air conditioning vents Do not install this product in strong sunlight or strong lighting Do not install this product in locations where the temperature may change suddenly TRIUMPH BOARD a s Page 6 of 19 TRIUMPH BOARD One ldea Ahead 2 Product description TRIUMPH BOARD Voting RF550 is not only powerful but also the most cost effective Interactive Wireless audience Response System on the market TRIUMPH BOARD Voting RF550 is fully compatible with Microsoft PowerPoint which makes it simple to use and enriches your presentations and classroom curricula by eliciting comments from the audience and encouraging participation TRIUMPH BOARD Voting RF550 is used in classrooms training sessions workshops focus groups or in corporate meetings A corporate or classroom profile can be elected during installation of the system With TB Vote s interactive PowerPoint software and the wireless audience remote keypad given to each participant real time feedback can be electronically collected to your PC Notebook at the click of a button TRIUMPH BOARD Voting RF550 is extendable to up
10. t can cause a burn or other injury Therefore immediately rinse with clean water and if any inflammation or other injury symptoms appear on the skin seek medical attention immediately Be sure to install batteries correctly Do not install batteries with positive and negative terminals reversed or use batteries other than the type specified It will cause pen malfunctions and excess heat or burns to the hand Be sure to provide insulation during disposal Be sure to insulate the positive and negative terminals of the battery using cellophane tape or similar material when disposing of batteries Disposing of batteries without insulating them may lead to overheating bursting or ignition due to shorting resulting in personal injury or fire Furthermore be sure to follow all local rules and regulations regarding proper battery disposal If within the EU be sure to follow Batteries Directive Batteries directive 2006 66 EC When replacing the batteries be careful not to over tighten the screw The product can be damaged if the screw is over tightened Do not use old and new batteries together TRIUMPH BOARD a s Page 5 of 19 TRIUMPH BOARD One ldea Ahead This can cause the battery to overheat ignite or leak Do not use different types of batteries together This can cause the battery to overheat ignite or leak Do not use batteries other than those specified Failure to comply may result in fire
11. t could damage this product and create a potentially unsafe operating condition Meaning of Signal Words i Indicates a potential hazard that could result in serious injury or death and or A WARNING property damage X Indicates hazards that could result in minor or moderate injury and or propert A N CAUTION Wrcicates ay eee Sey WARNING o Please read understand and follow all safety information contained in this User Manual before installation and use this product o Do not use this product in an outdoor and or wet environment o Do not use this product near water Electric shock will result o This product is not intended for use by unsupervised children Always provide proper adult supervision when using this product around children o Follow all installation instructions carefully o Stop operation immediately if your product emits smoke excessive heat abnormal smell or unusual noise These conditions can cause fire or electronic shock Immediately turn your product off and unplug the power cord or power plug or power adaptor and contact an authorized service representative for service o To prevent fire or shock hazard do not expose this product to rain or any type of moisture o If metal objects or a liquid get into this product turn this product off and unplug this product immediately Contact an authorized service representative for service Operating the contaminated product can cause fire or electronic shock
12. ussevasesusesdveneseraresutesavevensvesevarete 10 5 1 Instructor unit Student UNI cece cece ceecceeeeceeeeeeeeseeeceeeseeeesaeeseeeeeeeseeeseeesseeesaeeseuetsneesaess 10 IN GIOS SOCO IVO eree E E E 11 o OPE EOC OU a E E 12 C BASC OS UI O e A E E E A E EAE 12 6 1 1 Button functions for instructor UNIt cece cece eceeeeceeece cece eeseeeseeeaeeceeeseeeseeeseeseeeeaeees 12 7T OUI PROC SG MS e E E E E E E E E E E E E 15 Te OWA 6 eU ceqececeetscedeusqzendetesceauescsanduacqneedteneceauseczaees 15 7 2 TIALOWAlS SOD cessere EEES EEE ENERE OEE EREET EEEE 15 7 3 Connecting ENVIFTONMENN cccceecccseececeeeeceeeeeseeeeesseeeeceueeeseeeeeseeeeeseeesseeeessaueesaeeeseeeeneas 16 3 APO NA Gee he ne eee ee ee ee eee 17 ell OUBIEN UN cz arncztaecoaceeaecoseceee lt eaneteacoacatee doncstaceoacceqacoeeeneecoaneseacoacaseeeoeezeane E 17 oa Ma 2 8 2 erets 6 om ace ee ee R ee eet nee ene ere 18 9 Repa cervice and GOMTACIS acaccccccscncasseccesanccasescnscnsceasesceeaanecsececnsaseecangesteaateasueqenecsweceneccieaseaass 19 TRIUMPH BOARD a s Page 3 of 19 TRIUMPH BOARD One ldea Ahead 1 Safety Information Please read understand and follow the information contained in this User Guide before installation and use this product Safety Information This product was designed and intended for use indoor via wireless USB receiver connected to a desktop or laptop computer Use this product in an outdoor and or wet environmen
Download Pdf Manuals
Related Search