Devine USB-1 Condenser Microphone User manual - Bax
Contents
1. DEVINE Devine USB 1 Condenser Microphone User manual Any information and illustrations shown in this user manual are subject to change without further notice User manual version 1 0 Creation date author initials 27 01 2014 DK Revision date author initials 27 01 2014 DK Introduction Thank you for purchasing this Devine USB 1 Condenser Microphone Before you unpack all the received items carefully read this manual to become familiar with the functions of the microphone Also check the contents of the box to make sure all necessary parts are included Box contents 1 x USB 1 condenser microphone 1 x microphone adapter 1 x USB cable Unit and accessory inspection Always check the unit for possible damage before use If you suspect that something is wrong with the unit do not connect it When you suspect that your unit is broken or damaged contact your local dealer or a certified technician to inspect the unit Note Illustrations shown in this manual may vary from the actual product IMPORTANT Phantom power This studio condenser microphone requires 48V phantom power from a PA mixer studio mixer audio interface or phantom power supply Consultthe manual of your equipment or contact your local dealer when in doubt if your equipment is capable of providing a 48V voltage This microphone will not work properly when there is no proper 48V voltage activated Always check this if you suspect that your micropho2. After these are installed a message should pop up which confirms that the installation was succesful and that your microphone is ready for use The USB 1 can be used with almost every recording software available For starters Devine recommends the free available open source software Audacity This software works with Windows Mac and GNU Linux For more information visit the download page http audacity sourceforge net lang nl Directivity The USB 1 features a capsule with a cardioid pickup pattern and is ideal for recording individual instruments vocals and speech Cardioid pickup pattern means that the sound produced by sources located in front of the mic is strongly picked up It is often used in recording situations since this directivity pattern is less sensitive to picking up sounds coming from the back of the microphone Any information and illustrations shown in this user manual are subject to change without further notice User manual version 1 0 Creation date author initials 27 01 2014 DK Revision date author initials 27 01 2014 DK Microphone Installation The adapter on your microphone enables you to mount it on mic stands with either metric Europe or imperial gauge threads North America To do so first dismantle the microphone from the stand mount adapter by detaching the fine threadshoulder screw at the bottom end of the microphone Next gently fasten the adapter onto the microphone stand place the microphone in
3. face the sound source can also be helpful Only when the desired basic sound has been achieved should you start to use equalizers and signal processors if any at all Remember less is more Due to the extremely linear frequency response and the high sonic resolution of the USB 1 there is no need for high frequency EQing that can heavily influence the signal and unnecessarily increase the noise level The USB 1 provides the much desired transparency which often gets lost during recording and mixing Protect your microphone This Devine microphone is equipped with very sensitive electronics to provide optimal audio performance Make sure the microphone is not exposed to severe shocks collision drops from high altitude or any situations that may cause permanent damage Improper use of the microphone is not covered by warranty Always transport the microphone in the original package or in a flightcase with proper foam inlay The microphone is not intended for on the road use Any information and illustrations shown in this user manual are subject to change without further notice User manual version 1 0 Creation date author initials 27 01 2014 DK Revision date author initials 27 01 2014 DK Troubleshooting Problem No sound or very low sound signal Rattling and cracking sounds Loud high frequencies coming from the speakers Interruptance of the microphone signal Distortion and or noise in the captured sound Pos
4. nd illustrations shown in this user manual are subject to change without further notice User manual version 1 0 Creation date author initials 27 01 2014 DK Revision date author initials 27 01 2014 DK Description The Devine USB 1 is a newly designed Plug amp Play condenser microphone which does not require the manual installation of drivers This microphone utilizes a high performance USB processing chip and a high quality cardioid pickup pattern condenser capsule The microphone produces an excellent and gentle sound The Devine USB 1 is the ideal choice for recording vocals instruments podcasts and personal audio projects Audio Connection The USB 1 condenser microphone can be connected to a computer by using the provided USB cable A D conversion and USB connection The Devine USB 1 is equipped with an internal A D converter which transfers the analogue microphone signal to a digital signal which can be interpreted by a Mac or Windows computer Through USB you can connect the microphone directly to your computer The length of the included USB cable is approximately 1 50 meters First time connection The Devine Pro USB 1 is plug and play compatible which means that it will install the proper drivers automatically after you connect the microphone through USB When connecting the microphone you should receive a system message that a new USB device is found and that the system will search automatically for the correct drivers
5. ne might be damaged or broken Any information and illustrations shown in this user manual are subject to change without further notice User manual version 1 0 Creation date author initials 27 01 2014 DK Revision date author initials 27 01 2014 DK Warning To avoid electric shocks do not open the microphone housing There are no user serviceable parts inside Keep the microphone away from intense sunshine humidity dust and liquids Make sure the microphone is placed on a stable microphone stand while used To avoid interference keep the microphones away from devices like large power supplies power transformators radarstations and at a safe distance from computers DEVI Any information and illustrations shown in this user manual are subject to change without further notice User manual version 1 0 Creation date author initials 27 01 2014 DK Revision date author initials 27 01 2014 DK Features nt 2 zz nm mm a G z Uni directional at 1kHz ian Professional studio condenser microphone i compatible with Mac and PC computers High speed AD DA convertion ET A Sampling Rate 16bit 48kHz Utilizes a high quality condenser capjfile Suitable for vocal and instrument recordi Can be used in Windows2000 XP Vista a Installation of drivers not required Strong output No distortion a Solid construction i DEVINE Any information a
6. sible Cause USB cable not connected properly Volume set too low Microphone positioned too far away Moist inside the microphone Microphone positioned too close to the speakers which causes feedback Loose or broken USB cable Too much airflow caused by vocal airflows Solution Connect the USB cable to your computer make sure the cable is connected properly Increase incoming volume and gain on your mixer interface or other sound processing device Place the microphone closer to the sound source Let the microphone dry on room temperature and avoid use of the microphone in humid or moist environments Do not let the microphone come in contact with water or liquids Move the microphone further away from the speakers or change the position to prevent the microphone to be aimed directly at the speakers Check if the USB cable is plugged into the microphone correctly If that does not solve the problem try to change the cable Use a pop filter sold separately Any information and illustrations shown in this user manual are subject to change without further notice User manual version 1 0 Creation date author initials 27 01 2014 DK Revision date author initials 27 01 2014 DK Technical specifications Studio USB condenser microphone Ideal for recording individual instruments vocals and speech Works on Windows and Mac computers Installs drivers automatically Element 14 mm back electre
7. t condenser Polar Pattern Uni directional Connection USB Plug and Play USB A USB B Frequency Response 20 Hz 17 kHz Sensitivity 34 2dB OdB 1V Pa at 1KHz Output Impedance 1000 Ohms Load impedance 100 Ohms 30 at 1kHz Equivalent Noise Level 16dB A Max SPL 132dB at 1kHz 1 THD S N Ratio 78dB Package includes 1 Microphone adapter 1 USB cable 1 50 meters Any information and illustrations shown in this user manual are subject to change without further notice User manual version 1 0 Creation date author initials 27 01 2014 DK Revision date author initials 27 01 2014 DK
8. to it and tighten the screw again Basically the microphone in the stand mount adapter should stand upright and face the sound source at a right angle Make sure the Devine logo and name are directed at the sound source for best recording quality The angle of the microphone to the sound source influences the sound of the recording Therefore experiment with different positions until you achieve the desired sound To this end you can rotate the mic in the stand mount adapter by loosening the screw somewhat and tightening it again If necessary you can bend the microphone out of its vertical position by using the hinge on the microphone stand Note please make sure to handle the microphone shaft with attention and care to avoid damaging the screw thread By no means should you ever apply excessive force It is possible to detach the USB 1 microphone from the stand mount adapter and attach it to a commercially available desktop mic stand Level Setting Adjusting the Basic Sound Adjust the gain control in the microphone channel of your software audio editor so that the peak indicator of that channel only lights up occasionally or never at all The EQ controls in the microphone software channel should be set to mid neutral position to start with To get the sound you want try changing the mic position relative to the sound source or even move the microphone around in the recording room of your studio Adjusting the angle at which the walls
Download Pdf Manuals
Related Search