ENG Projecting an Image in the DICOM SIM Mode
Contents
1. Canon ENG Projecting an Image in the DICOM SIM Mode In the DICOM simulation mode hereinafter referred to as DICOM SIM this projector can project a monochrome medical image such as an X ray radiography CT image MRI image etc in the tone similar to the DICOM Digital Imaging and Communications in Medicine standard Typically to project the image according to the DICOM standard it requires the grayscale tone correction using a luminance meter according to the environment In this projector there are 21 types of tone settings for various ambient lights You can correct the tone in a simplified manner by selecting an appropriate test chart It is suited to project an image in a medical lecture academic conference in hospital con ference etc Important This projector is not the display monitor for a medical image It cannot be used for the radiological image reading or medical examination e It is recommended to check the tone everytime when using this projector since it does not have the tone correction and calibration functions against the secular change e It may take approximately 30 minutes until the projection brightness of this projector becomes stabled Switching the mode to the DICOM SIM Mode Push the IMAGE button on the remote control until DICOM SIM is displayed or select DICOM SIM from Image mode in the Image adjustment menu An Example of the Test Chart o E YT1 7384 000 CANON2. INC 2009 Projecting the Near DICOM Standard Compatible Image Image mode HDMI COMPONENT O DIGITAL PC VIDEO S VIDEO O ANALOG PC O USB is only applicable to SX80 Markll You can project an image as if it is compat ible with the DICOM standard by selecting a test chart suited for the projecting envi ronment Image adjustment Image mode Ww DICOM SIM ANALOG PC 1 a n Brightness Contrast Sharpness fal Gamma e Color adjustment Advanced adjustment Image adjustment gt DICOM SIM Lamp mode Normal Press OK to select DICOM SIM and press the MENU button to exit from the menu screen To check a test chart press the OK button when no menu screen is Press the lt gt button to change the tone of the test chart Make sure to select the tone in which all patterns are displayed gt Press this button to brighten the chart Use this setting if no adequate contrast is available lt Press this button to darken the chart Use this setting if adequate contrast is avail able due to the low ambient light Press the OK button after the setting Q e Perform one of the followings to obtain an appropriate projection if you can not project the test chart under any settings Darken the ambient light Reduce the image size Reduce the projection distance e It is recommended to selec
3. t DIGITAL PC as the input signal
Download Pdf Manuals
Related Search