User manual - Performance Audio
Contents
1. 12 11 ADJ SPALED YX f7 DMX SWITCH PAK User Instructions SP4LED Introduction Unpacking Thank you for purchasing the SP4LED by American DJe Every SP4LED has been thoroughly tested and has been shipped in perfect operating condition Carefully check the shipping carton for damage that may have occurred during shipping If the carton appears to be damaged carefully inspect your fixture for any damage and be sure all accessories necessary to operate the unit has arrived intact In the case damage has been found or parts are missing please contact our toll free customer support number for further instructions Do not return this unit to your dealer without first contacting customer sup port Introduction The American DJ SP4LED is part of a continuing pur suit to create high quality intelligent lighting and lighting control The SP4LED is a 4 Channel DMX switch pack designed to turn LED fixtures on and off using a universal DMX controller Up to 128 SP4LEDs may be daisy chained in one DMX chain There are 8 power inputs on the front of the controller to plug your lighting fixtures into Customer Support American DJ provides a customer support line to provide set up help and to answer any question should you encoun ter problems during your set up or initial operation You may also visit us on the web at www AmericanDJ com for any comments or sugges tions Service Hours are Monday through Friday 8 00 a m to 4 30 p m Pacif2. authorization R A number The R A number must be clearly written on the outside of the return package A brief description of the problem as well as the R A number must also be written down on a piece of paper included in the shipping carton If the unit is under warranty you must provide a copy of your proof of purchase invoice You may obtain a R A number by contacting our customer support team on our customer support number All pack ages returned to the service department not displaying a R A number on the outside of the package will be returned to the shipper American DJ www Americandj com SP4LED User Manual Page 3 SP4LED Safety Precautions To reduce the risk of electrical shock or fire do not expose this unit rain or moisture Do not spill water or other liquids into or on to your unit Be sure that the local power outlet match that of the required volt age for your unit Do not attempt to operate this unit if the power cord has been frayed or broken Do not attempt to remove or break off the ground prong from the electrical cord This prong is used to reduce the risk of electrical shock and fire in case of an internal short Disconnect from main power before making any type of connection Do not remove the cover under any conditions There are no user serviceable parts inside Never operate this unit when it s cover is removed Never plug this unit in to a dimmer pack Always be sure to mount this unit
3. if the serial number has been altered or removed if the product is modified in any manner which American DJ Inc concludes after inspection affects the reliability of the product if the product has been repaired or serviced by anyone other than the American Du Inc factory unless prior written authorization was issued to purchaser by American Du Inc if the product is damaged because not properly maintained as set forth in the instruction manual D This is not a service contract and this warranty does not include maintenance cleaning or periodic check up During the period specified above American Du Inc will replace defective parts at its expense with new or refurbished parts and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship The sole responsibility of Ameri can DJ Inc under this warranty shall be limited to the repair of the product or replacement thereof including parts at the sole discretion of American DJ All products covered by this warranty were manufactured after January 1 1990 and bear identifying marks to that effect E American DJ Inc reserves the right to make changes in design and or improvements upon its products without any obligation to include these changes in any products theretofore man ufactured No warranty whether expressed or implied is given or made with respect to any acces sory supplied with products described above Except to the exten
4. in an area that will allow proper ventilation Allow about 6 15cm between this device and a wall Do not attempt to operate this unit if it becomes damaged This unit is intended for indoor use only use of this product out doors voids all warranties During long periods of non use disconnect the unit s main power Always mount this unit in safe and stable matter Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to the point they exit from the unit e Cleaning The fixture should be cleaned only as recommended by the manufacturer See page 15 for cleaning details e Heat The appliance should be situated away from heat sources such as radiators heat registers stoves or other appliances inclu ding amplifiers that produce heat e The fixture should be serviced by qualified service personnel when A The power supply cord or the plug has been damaged B Objects have fallen or liquid has been spilled into the appliance C The appliance has been exposed to rain or water D The appliance does not appear to operate normally or exhibits a marked change in performance American DJ www Americandj com SP4LED User Manual Page 4 SP4LED Set Up Power Supply Before plugging your unit in be sure the source voltage in your area matches the required voltage for your American DJe SP4LED The American DJe SP4LED vo
5. plug in the fixture via the XLR con nections to any standard DMX controller Select your desired DMX channel mode and then press the UP or DOWN buttons to adjust the DMX address 3 To select your desired DMX channel mode press the MODE button until d PX is displayed X represents the displayed channel mode e To run the 3 Channel Mode press the UP or DOWN buttons until d P1 is displayed This is the DMX addressing for the 3 Channel Mode e To run the 5 Channel Mode press the UP or DOWN buttons until d P2 is displayed This is the DMX addressing for the 5 Channel Mode e Torun the 7 Channel Mode press the UP or DOWN buttons until d P3 is displayed This is the DMX addressing for the 7 Channel Mode 4 Please see pages 12 14 for DMX values and traits Infrared Receiver This function is used to activate and deactivate the infrared receiver When this function is activated you can control the SP4LED using the ADJ LED RC Remote Control Please see the user manual for con trols and functions 1 Plug the fixture in and press the MODE button until AUTO is dis played 2 Press the SET UP button until IrXX is displayed XX represents either on or oF 3 Press the UP or DOWN buttons to either activate the remote function On or deactivate it Off American DJ www Americandj com SP4LED User Manual Page 9 SP4LED ADJ LED RC Operating Instructions The ADJ LED RC inf
6. 2 protocol The SP4LED has 3 DMX channel modes please see pages 8 10 for the different modes Your unit and your DMX controller require a standard 3 pin XLR connec tor for data input and data output Figure 1 We recommend Accu Cable DMX cables If you are making your own cables be sure to use standard 110 120 Ohm shielded cable This cable may be purchased at almost all pro lighting stores Your cables should be made with a male and female ii XLR connector on either end of the cable Also nue remember that DMX cable must be daisy chained and cannot be split American DJ www Americandj com SP4LED User Manual Page 5 SP4LED Set Up Notice Be sure to follow figures two and three when making your own cables Do not use the ground lug on the XLR connector Do not con nect the cable s shield conductor to the ground lug or allow the shield conductor to come in contact with the XLR s outer casing Grounding the shield could cause a short circuit and erratic behavior COMMON DMX512 OUT DMX512 IN 3 PIN XLR DMX 3 PIN XLR XLR Male Socket XLR Female Socket 1 e 2 Bop Figure 3 Special Note Line Termination When longer runs of cable are used you may need to use a terminator on the last unit to avoid erratic behavior A terminator is a 110 120 ohm 1 4 watt resistor which is con nected between pins 2 and 3 of a male XLR connector DATA and DATA This unit is inserted in the female XLR connector of the last unit in yo
7. 3 7 DMX Channels SP4LED 1 Channel DMX Values amp Functions Function Channel Value MASTER DIMMER 0 100 PROGRAMS 0 9 DIMMING 10 29 PROGRAM 1 30 49 PROGRAM 2 50 69 PROGRAM 3 70 89 PROGRAM 4 90 109 PROGRAM 5 110 129 PROGRAM 6 PROGRAM 7 PROGRAM 8 PROGRAM 9 PROGRAM 10 PROGRAM 11 AUTO RUN SOUND ACTIVE PROGRAM SPEED SOUND SENSITVITY PROGRAM SPEED SLOW FAST SOUND SENSITIVITY LEAST SENSITIVE MOST SENSITIVE e When using Channel 2 values 10 249 Channel 3 will control the speed of the programs e When using Channel 2 values 250 255 Channel 3 will control the sound sensitivity 130 149 150 169 170 189 190 209 210 229 230 249 250 255 American DJ www Americandj com SP4LED User Manual Page 12 SP4LED 5 Channel DMX Values amp Functions SP4LED 7 Channel DMX Values amp Functions Value Function Value Function eee MASTER DIMMER 1 MASTER DIMMER 0 255 0 100 0 255 0 100 PROGRAMS 2 PROGRAMS 0 9 DIMMING 0 9 DIMMING 10 29 PROGRAM 1 10 29 PROGRAM 1 30 49 PROGRAM 2 30 49 PROGRAM 2 50 69 PROGRAM 3 50 69 PROGRAM 3 70 89 PROGRAM 4 70 89 PROGRAM 4 90 109 PROGRAM 5 90 109 PROGRAM 5 110 129 PROGRAM 6 110 129 PROGRAM 6 130 149 PROGRAM 7 130 149 PROGRAM 7 150 169 PROGRAM 8 150 169 PROGRAM 8 170 189 PROGRAM 9 170 189 PROGRAM 9 190 209 PROGRAM 10 190 209 PROGRAM 10 210 229 PROGRAM 11 210 229 PROGRAM 11 230 249 AUTO RUN 2
8. 30 249 AUTO RUN 250 255 SOUND ACTIVE 250 255 SOUND ACTIVE 1 255 PROGRAM SPEED SLOW FAST 1 255 SOUND SENSITIVITY LEAST SENSITIVE MOST SENSITIVE 4 OUTPUT CHANNEL 1 DIMMER DIM BRIGHT 5 OUTPUT CHANNEL 2 DIMMER DIM BRIGHT 1 255 OUTPUT CHANNEL 3 DIMMER DIM BRIGHT 2 3 PROGRAM SPEED SOUND SENSITVITY 3 PROGRAM SPEED SOUND SENSITVITY T 299 PROGRAM SPEED SLOW FAST 250 SOUND SENSITIVITY LEAST SENSITIVE MOST SENSITIVE 4 1 255 OUTPUT CHANNELS 1 amp 2 DIMMER DIM BRIGHT J 5 1 255 OUTPUT CHANNELS 3 amp 4 DIMMER DIM BRIGHT e When using Channel 2 values 0 9 Channel 4 amp Channel 5 will control the dimming of output channels 1 4 e When using Channel 2 values 10 249 Channel 3 will control the speed of 7 1 255 OUTPUT CHANNEL 4 DIMMER e When using Channel 2 values 250 255 Channel 3 will control the sound sensitivity e When using Channel 2 values 0 9 Channel 4 Channel 7 will control the dimming of output channels 1 4 e When using Channel 2 values 10 249 Channel 3 will control the speed of the programs e When using Channel 2 values 250 255 Channel 3 will control the sound sensitivity American DJ www Americandj com SP4LED User Manual Page 13 American DJ www Americandj com SP4LED User Manual Page 14 SP4LED Fuse Replacement Disconnect from the main power supply Insert a standard flat head screw driver in to the fuse holder housing located on the front of the uni
9. MX modes 2 After you have selected your mode set the DMX address for the fixture by pressing the S button When the S button is pressed the output channel LED s will flash 2 3 times Use the number but tons to press in your desired address 3 After the output channel LED s have flashed output channel 1 LED will remain lit press the first number in your desired address 4 After you have pressed the first number in your address output channel 2 s LED will light Now press the button of the second num ber in your desired address 5 After you have pressed the second number in your address output channel 3 s LED will light Now press the third and last number in your desired address After all three numbers have been entered the output channel LED s will flash 2 3 times to indicate that the DMX address is correct The unit will then automatically enter DMX mode If the DMX address is incorrect the output channel 1 LED will be lit 6 Now you may connect the fixture via the XLR connections to any standard DMX controller Please see pages 12 14 to for a detailed descriptions of the DMX modes values and traits e If Output Channel 1 is lit you are in DMX Mode 1 1 DMX Channel American DJ www Americandj com SP4LED User Manual Page 11 SP4LED ADJ LED RC Operating Instructions e If Output Channel 2 is lit you are in DMX Mode 2 5 DMX Channels e If Output Channel 3 is lit you are in DMX Mode
10. MX modes values and traits SOUND ACTIVE This button activates sound active mode Use the and buttons to adjust the sound sensitivity SLAVE This designates the fixture as a slave fixture in a master slave configuration SET ADDRESS Press this button to set the DMX address Press this button first then press the numbers to set the address Example Set DMX Address 1 Press S 0 0 1 Set DMX Address 245 Press S 2 4 5 1 2 3 4 Press the 1 2 3 4 buttons to choose either of the four output channels and then press the or to adjust the intensity 1 is for American DJ www Americandj com SP4LED User Manual Page 10 SP4LED ADJ LED RC Operating Instructions output channel 1 2 is output channel 2 3 is output channel 3 and 4 is output channel 4 and Use these buttons to adjust the speed of the Auto Run sound sensitivity and program selection DMX Control Operating through an DMX controller gives the user the freedom to create their own programs tailored to their own individual needs Follow the directions below to set your DMX Mode and address 1 Before connecting to an DMX controller your fixture has different DMX channel modes please select your desired mode by press ing the DMX Mode button then using the or buttons to scroll through the DMX Channel Modes Set the mode before you address the fixture See the bottom of this page for the D
11. binations to choose from Manual Dimmer Output Mode In this mode the intensity of each output channel can be adjusted 1 Plug the fixture in and press the MODE button until 1 XXX is dis played XXX represents the displayed intensity number while 1 represents Output Channel 1 2 To change the output channel press the SET UP button When you have found the output channel you would like to adjust use the UP and DOWN buttons to adjust the intensity 2 The intensity can be adjusted from 00 no output to 255 full intensity Auto Mode 1 Plug the fixture in and press the MODE button until AUTO is dis played Auto mode is now activated 2 The auto mode run speed can be adjusted by pressing the SET UP button SP XX will now be displayed XX 1 99 1 is the slowest American DJ www Americandj com SP4LED User Manual Page 8 SP4LED Operating Instructions speed 99 the fastest speed DMX Mode Operating through a DMX controller gives the user the freedom to cre ate their own programs tailored to their own individual needs This func tion also allows you to use your fixtures as spot lights The SP4LED has 3 DMX Channel modes 3 Channel mode 5 Channel mode and a 7 Channel mode See pages 12 14 for each modes DMX traits 1 This function will allow you to control each individual fixture s traits with a standard DMX 512 controller 2 Torun your fixture in DMX mode
12. ducts 90 Day Limited Warranty e American DJ L E D Products 2 year 730 day Limited Warranty excluding motors which have a 1 year 365 day Limited Warranty American DJ www Americandj com SP4LED User Manual Page 16 SP4LED Notes SP4LED Notes American DJ www Americandj com SP4LED User Manual Page 17 American DJ www Americandj com SP4LED User Manual Page 18 SP4LED Specifications Model SP4LED SPECIFICATIONS Working Position Voltage Any safe working position 120V 60Hz or 240V 50Hz Fuse 5A per Channel Total 10A Max Weight 4 5lbs 2 1Kgs 10 5 L x 7 75 W x 3 H 262 x 192 x 74mm 3 DMX Modes 3 Channel Mode 5 Channel Mode amp 7 Channel Mode 1 Year 365 days Dimensions DMX Channels Warranty Please Note Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice American DJ www Americandj com SP4LED User Manual Page 19 American DJ Supply American DJ World Headquarters 6122 S Eastern Ave Los Angeles CA 90040 USA Tel 323 582 2650 Fax 323 725 6100 Web www americandj com E mail info americandj com American DJ Europe Junostraat 2 6468 EW Kerkrade Netherlands service americandj eu www americandj eu Tel 31 45 546 85 00 Fax 31 45 546 85 99 Follow Us On fh a facebook com americandj twitter com americandj youtube com adjlighting
13. ew American DJ www Americandj com SP4LED User Manual Page 15 SP4LED Warranty MANUFACTURER S LIMITED WARRANTY A American Du Inc hereby warrants to the original purchaser American DJ and American Audio products to be free of manufacturing defects in material and workmanship for a prescribed period from the date of purchase see specific warranty period on reverse This warranty shall be valid only if the product is purchased within the United States of America including possessions and territories It is the owner s responsibility to establish the date and place of purchase by ac ceptable evidence at the time service is sought B For warranty service you must obtain a Return Authorization number RA before sending back the product Contact American DJ Inc Service Department at 800 322 6337 Send the product only to the American DJ Inc factory All shipping charges must be pre paid If the requested repairs or service including parts replacement are within the terms of this warranty American DJ Inc will pay return shipping charges only to a designated point within the United States If the entire instrument is sent it must be shipped in it s original package No accessories should be shipped with the product If any accessories are shipped with the product American Du Inc shall have no liability whatsoever for loss of or damage to any such accessories nor for the safe return thereof C This warranty is void
14. ic Standard Time Voice 323 582 3322 Fax 323 582 3108 E mail support AmericanDJ com Warning To prevent or reduce the risk of electrical shock or fire do not expose this unit to rain or moisture Caution There are no user serviceable parts inside this unit Do not attempt any repairs yourself doing so will void your manufactures war ranty In the unlikely event your unit may require service please contact American Du PLEASE recycle the shipping carton when ever possible American DJ www Americandj com SP4LED User Manual Page 2 SP4LED General Instructions To optimize the performance of this product please read these operating instructions carefully to familiarize yourself with the basic operations of this unit These instructions contain important safety information regarding the use and maintenance of this unit Please keep this manual with the unit for future reference SP4LED Features e Five Operating Modes e Built in Microphone e DMX 512 protocol 3 Pin DMX Connection e Up to 128 SP4LEDs may be Daisy Chained together via DMX e 3 DMX Channel Modes 3 Channel Mode 5 Channel Mode amp 7 Channel Mode e ADJ LED RC Compatiable Sold Separately SP4LED Warranty Registration The SP4LED carries a one year limited warranty Please fill out the enclosed warranty card to validate your purchase All returned service items whether under warranty or not must be freight pre paid and accompany a return
15. ltage is user selectable Because line voltage may vary from venue to venue you should be sure your unit voltage matches the wall outlet voltage before attempt ing to operate you fixture DMX 512 DMX is short for Digital Multiplex This is a universal pro tocol used as a form of communication between intelligent fixtures and controllers A DMX controller sends DMX data instructions from the controller to the fixture DMX data is sent as serial data that trav els from fixture to fixture via the DATA IN and DATA OUT XLR ter minals located on all DMX fixtures most controllers only have a DATA QUT terminal DMX Linking DMX is a language allowing all makes and models of different manufactures to be linked together and operate from a single controller as long as all fixtures and the controller are DMX compli ant To ensure proper DMX data transmission when using several DMX fixtures try to use the shortest cable path possible The order in which fixtures are connected in a DMX line does not influence the DMX addressing For example a fixture assigned a DMX address of 1 may be placed anywhere in a DMX line at the beginning at the end or anywhere in the middle When a fixture is assigned a DMX address of 1 the DMX controller knows to send DATA assigned to address 1 to that unit no matter where it is located in the DMX chain Data Cable DMX Cable Requirements For DMX Operation The SP4LED can be controlled via DMX 51
16. rared remote sold seperately has many differnet functions and gives you complete control of your SP4LED To control the your desired fixture you must aim the controller at the front of the fixture and be no more the 30 feet away To use the ADJ LED RC you must first activate the fixtures infrared receiver to activate the receiv er please see the instructions on page 9 BLACKOUT Pressing this button will blackout the fixture AUTO RUN This button will run an automatic program You can control the speed of the Auto Run by pressing the SPEED button first and then pressing the and buttons PROGRAM SELECTION This button will let you access the units built in programs Press this button and then press the or to navigate through the built in programs You can control the speed of the program by pressing the SPEED button and then pressing the and buttons When in Program 1 pressing the SPEED button will let select 1 of 15 output channel combinations Use the and buttons scroll through the different combinations FLASH This button will not work with the SP4LED SPEED Press this button and use the amp buttons to adjust the speed of the Auto run DMX MODE This button will let you select which DMX mode you want to use Some fixtures will come with different DMX channel modes This button will switch between the different modes Please see pages 13 17 for D
17. t Turn the screwdriver in counter clockwise direction to remove the fuse holder Remove the old fuse and discard it replace the fuse with the same type Insert the fuse back into it s housing SP4LED Trouble Shooting Listed below are a few common problems the user may encounter with solutions No power output from the unit 1 Be sure the external fuse has not blown The fuse is located on the rear panel of the unit 2 Be sure the fuse holder is completely and properly seated Unit not responding to DMX 1 Check that the DMX cables are connected properly and are wired correctly pin 3 is hot on some other DMX devices pin 2 may be hot Also check that all cables are connected to the right connectors it does matter which way the inputs and outputs are connected Unit does not respond to sound 1 Quiet or high pitched sounds will not activate the unit 2 Make sure that you are in Sound Active mode SP4LED Cleaning Due to fog residue smoke and dust cleaning the internal and exter nal optical lenses must be carried out periodically to optimize light output 1 Use normal glass cleaner and a soft cloth to wipe down the outside casing 2 Clean the external optics with glass cleaner and a soft cloth every 20 days 3 Always be sure to dry all parts completely before plugging the unit back in Cleaning frequency depends on the environment in which the fixture operates i e smoke fog residue dust d
18. t prohibited by applicable law all implied warranties made by American DJ Inc in connection with this product including warranties of merchantability or fitness are limited in duration to the warranty period set forth above And no warranties whether expressed or implied including warranties of merchantability or fitness shall apply to this product after said period has expired The consumer s and or Dealer s sole remedy shall be such repair or replacement as is expressly provided above and under no circumstances shall American Du Inc be liable for any loss or damage direct or consequential arising out of the use of or inability to use this product This warranty is the only written warranty applicable to American DJ and American Audio Products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published MANUFACTURER S LIMITED WARRANTY PERIODS All American Audio Products 1 year 365 day Limited Warranty except V Plus Series Ampli fiers All American Audio V Plus Series Amplifiers 3 year 1095 day Limited Warranty e American DJ Lighting and American DJ Branded Products 1 year 365 day Limited Warranty Such as Special Effect Lighting Intelligent Lighting UV lighting Strobes Fog Machines Bubble Machines Mirror Balls Par Cans Trussing Lighting Stands etc excluding Laser Products lamps and Star Tec Series e American DJ Laser Products and Star Tec Pro
19. to stay on at all times press the MODE and UP buttons simultaneously Operating Modes You can use the SP4LED in five ways e Sound Active mode The unit will react to sound chasing through the built in programs e Program Mode There are 12 programs to choose from e Auto Mode This will run an automatic program e Manual Dimmer Output mode Adjust the intensity of all output channels e DMX control mode This function will allow you to control each individual fixtures traits with a standard DMX 512 controller such as as the American DJ Show Designer Master Slave Operation This function will allows you to link units together to run in a Master Slave mode In Master Slave operation one unit will act as the controlling unit and the others will react to the controlling units built in programs Any unit can act as a Master or as a Slave however only one unit can be programmed to act as the Master Master Slave Connections and Settings 1 Daisy chain your units via the XLR connector on the rear of the unit Use standard XLR microphone cables to link your units together Remember that the Male XLR connector is the input and the Female XLR connector is the ouput The first unit in the chain master will use the female XLR connector only The last unit in the chain will use the male XLR connector only 2 Set the Master unit to your desired mode of operation 3 For the Slave unit s press the UP or DOWN b
20. ur daisy chain to terminate the line Using a cable terminator ADJ part number Z DMX T will decrease the possibilities of erratic behavior Termination reduces signal errors and avoids signal transmission problems 0 and interference It is always advisable A z to connect a DMX terminal Resistance Figure 2 XLR Pin Configuration Pin 1 Ground Pin 2 Data Compliment negative SSeS cece el Pin 3 Data True positive 120 Ohm 1 4 W between PIN 2 DMX and PIN 3 DMX of the last fixture Figure 4 5 Pin XLR DMX Connectors Some manufactures use 5 pin DMX 512 data cables for DAIA transmission in place of 3 pin 5 pin DMX fixtures may be implemented in a 3 pin DMX line When inserting stan dard 5 pin data cables in to a 3 pin line a cable adaptor must be used these adaptors are readily available at most electric stores The chart below details a proper cable conversion 3 Pin XLR to 5 Pin XLR Conversion 3 Pin XLR Female Out 5 Pin XLR Male In Sata Compliment sana E A American DJ www Americandj com SP4LED User Manual Page 6 SP4LED Operating Instructions LED Display On Off To set the LED display to turn off after 20 seconds press the MODE and DOWN buttons simultaneously Now the display will disappear after 20s Press any button to turn the display on again Be advised though that the display will turn off automatically after 20 seconds If your want the display
21. uttons until SLAv is displayed 4 Connect the Slave unit or units and they will automatically start to follow the Master American DJ www Americandj com SP4LED User Manual Page 7 SP4LED Operating Instructions Sound Active Mode In this mode the SP4LED will react to sound 1 Plug the fixture in and press the MODE button until SU XX is dis played XX represents the sound sensitivity setting 01 is the least sound sensitive and 31 is the most sound sensitive Use the UP and DOWN buttons to adjust the sound sensitivity 2 The fixture will now change via sound Program Mode In this mode the SP4LED will run 1 of 12 factory installed programs 1 Plug the fixture in and press the MODE button until Pr XX is display ed XX 01 12 There are 12 different preset programs to choose from 2 Press the UP or DOWN buttons to find your desired program 3 When you have found your desired program press the SET UP but ton SP XX will now be displayed In this menu you can adjust the running speed of the program XX 1 99 1 is the slowest speed 99 the fastest soeed Note The speed can only be adjusted in Pro grams 2 12 4 When Pr 01 is displayed you can press the SET UP button to select different output channel combinations When you press the SET UP button CG XX will be displayed Use the UP or DOWN buttons to change the combinations There are 15 com
Download Pdf Manuals
Related Search