IPEmotionSettings COM Manual
Contents
1. ICloudDrives Cloud drive list interface IDataPlugln Data plug in interface IDataPluglns Data plug in list Plug in interlace IPluglnOption Plug in options IPluglnOptions Plug in options list interface IPluglns Plug in list interface IReferenceObject Reference object interface IReferenceObjects Reference object list ISettingsHandler IPEmotion settings handler interface lUserAccount User IUserAccounts User account list interface IPEmotionSettings Interface Index RO N IPEmotion IPETRONIK GmbH amp KG 12 60 Chapter 5 IPEmotionSettings Namespace Documentation 5 1 IPEmotionSettings Namespace Reference Namespace of the IPEmotion settings interface Interfaces interface ICloudDrive Cloud drive interface interface ICloudDrives Cloud drive list interface interface IDataPlugln Data plug in interface interface IDataPluglns Data plug in l2. 6 11 ISettingsHandler Interface 6 12 lUserAccount Interface Reference 6 13 IUserAccounts Interface Reference 11 11 13 13 Chapter 1 Important general information 1 1 Important information Please follow these instructions before and during the use and application on any IPETRONIK product 1 1 1 Safety and Warning instructions Please follow the instructions and information as contained in the user manual 1 The user can influence an electronic system by applying the IPETRONIK product This might cause risk of personal injury or property damages 2 The use and application of the IPETRONIK product is permitted only to qualified professional staff as well as only in appropriate manner and in the designated use 3 Before using an IPETRONIK measurement system in the vehicle it has to be verified that no func tion of the vehicle which is relevant for secure operation might be influenced by the installation of the IPETRONIK measurement system in the vehicle by an potential malfunction of the IPETRONIK system during the test drive In order to avoid possible danger or personal injury and property damages appropriate actions are to be taken such actions have to bring the entire system into a secured condition e g by using a system for emergency stop an emergen
3. Copyright License Limitation liability Any liability of IPETRONIK its representatives agents and the like especially with regard to personal injury or damage to property of any kind shall be excluded within the legally admissible framework as far as the instructions and warnings as mentioned below have not been followed Warranty Products accessories and services have a 24 months warranty All product data specifications drawings etc correspond to the current condition of the indicated creation date For the purpose of optimizing technical processes and production some details of our modules and accessory components may be modified at any time without prior notification Although the present document has been prepared with the utmost attention to detail it may not be exempt of misprints typing or transcription errors These errors are not covered by any warranty Copyright and Duplication All rights reserved to IPETRONIK GmbH Co KG particular those of property copyright and trademarks The rights related to any third party trademarks mentioned in the present document remain unaffected This document may not be duplicated partially or entirely without the prior approval from IPETRONIK GimbH amp Co KG All graphics and explanations are copyright protected Any use beyond the scope of the document is prohibited Software license agreement This software is property of I
4. 34 Count 34 GetEnumerator 34 Item 34 IPlugins 35 Count 35 GetEnumerator 35 Item 35 IReferenceObject 36 IsReferencePart 36 Priority 36 TypeName 36 IReferenceObjects 37 Count 37 GetEnumerator 37 Item 37 ISettingsHandler 38 ActivatePlugln 42 ActivatePlugInVersion 42 AddHotKey 42 AnalysisDiagramCurveQuality 45 AutoAdministration 45 ChangeAdminPassword 43 CharacteristicSupport 45 CloudDrives 45 ConfigDefaultDirectory 46 Culture 46 CustomDataDefaultDirectory 46 DatabaseDefaultDirectory 46 DataExportPlugInList 46 DatalmportPlugInList 46 DeactivatePlugln 43 DisableUserAdministration 43 DisplayExtendedTabs 46 EnableAdditionalWarnings 46 EnablelmporterLogging 46 EnableMapCache 46 EnableProtocolChannelConfiguration 47 EnableProtocolConfiguration 47 EnableReferenceConfiguration 47 EnableUserAdministration 43 EnableVariableConfiguration 47 ErrorFreeMeasurementChainAtlnit 47 ExpertMode 47 ExportDefaultDirectory 47 ExportEnvironment 44 FontSize 47 GetPreferredUnit 44 GetUserAccounts 44 HardwareDetectionAction 47 HardwareDetectionOnStart 48 HudTransparency 48 IgnoreVerbalTable 48 ImportDefaultDirectory 48 ImportEnvironment 44 IncludeExternalFilesInConfiguration 48 IncludeOptionsInConfiguration 48 InitViewPagesAtFirstVisibility 48 IPETRONIK GmbH amp Co KG 58 60 IsUserAdministrationActive 48 JobConfiguration 48 LayoutDefaultDirectory 48
5. FILE e 180 COMMAND EDIT PASTE FROM FILE 181 COMMAND GENERAL IMPORT WORKING ENVIRONMENT 182 COMMAND GENERAL EXPORT WORKING ENVIRONMENT e 183 COMMAND MEASUREMENT ADD SCALING 184 COMMAND ANALYSIS CURSORS FREE 185 COMMAND GENERAL RESET OBJECT POOL 186 COMMAND GENERAL CACHE 187 COMMAND ANALYSIS X RANGE 188 COMMAND ONLINEVIEW ADD TRAFFIC ANALYSER e 189 COMMAND ONLINEVIEW ADD CHANNEL TABLE 190 COMMAND GENERAL APP EXPORT The following commands need a parameter 666666 COMMAND SCRIPTING RUN SCRIPT e 666667 COMMAND SHOW SCREEN 666668 COMMAND USER BUTTON 666669 COMMAND ANALYSIS SHOW SCREEN 666670 COMMAND MARKER 5 1 2 10 enum UserLevel Enumeration of available access levels Remarks The following enumeration values are available 0 10 Access level with the least privileges 1 1 2 Leve12 3 Level3 Access level with the highest privileges IPEmotion COM Reference IPETRONIK GmbH amp Co KG 21 60 IPEmotionSettings Namespace Documentation TRON K IPEmotion COM Reference IPETRONIK GmbH amp Co KG 22 60 Chapter 6 IPEmotionSettings Interface Documentation 6 1 ICloudDrive Interface Reference Cloud drive interface Properties bool Active get set Specifies whether the cloud drive will be connected string LoginName get set Returns or sets the login name needed to acc
6. REPORT AS EXCEL 121 COMMAND 700 REPORT 800 122 COMMAND 700 REPORT 400 IPEmotion COM Reference IPETRONIK GmbH amp Co KG 19 60 IPEmotionSettings Namespace Documentation T RO N K 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 COMMAND ZOOM REPORT 300 COMMAND ZOOM REPORT 200 COMMAND ZOOM REPORT 0 COMMAND ZOOM REPORT 100 COMMAND ZOOM REPORT 50 COMMAND ADD REPORT ELEMENT ARROW COMMAND ADD REPORT ELEMENT LINE COMMAND ADD REPORT ELEMENT PICTURE COMMAND ADD REPORT ELEMENT TEXT COMMAND ADD REPORT ELEMENT RICH TEXT COMMAND CHECK CONFIGURATION COMMAND MAP HARDWARE COMMAND ADD RANGE COMMAND ADD SEQUENCE CONTROL COMMAND ADD SEQUENCE CONTROL BLOCK COMMAND ADJUST WITH TEDS COMMAND ADJUST OFFSETS COMMAND REPORTING ELEMENT LINE BACK COMMAND REPORTING ELEMENT LINE VERT COMMAND REPORTING ELEMENT LINE HORZ COMMAND REPORTING ELEMENT ELLIPSE COMMAND REPORTING ELEMENT RECTANGLE COMMAND REPORTING LAYOUT DESIGNER COMMAND REPORTING ZOOM WHOLE PAGE COMMAND COMPARE CONFIGURATIONS COMMAND SHOW HARDWARE
7. CanConfigurate IUserAccount 53 CanModifyStatus IUserAccount 53 ChangeAdminPassword ISettingsHandler 43 CharacteristicSupport IPEmotionSettings 14 ISettingsHandler 45 CloudDrives ISettingsHandler 45 ConfigDefaultDirectory ISettingsHandler 46 ConfigurationPriority IPEmotionSettings 15 Count ICloudDrives 26 IDataPlugIns 29 IPluginOptions 34 IPluglns 35 IReferenceObjects 37 IUserAccounts 56 Culture ISettingsHandler 46 CustomDataDefaultDirectory ISettingsHandler 46 DatabaseDefaultDirectory ISettingsHandler 46 DataExportPluglInList ISettingsHandler 46 DatalmportPlugInList ISettingsHandler 46 DeactivatePlugIn ISettingsHandler 43 DisableUserAdministration ISettingsHandler 43 DisplayExtendedTabs ISettingsHandler 46 EnableAdditionalWarnings ISettingsHandler 46 EnablelmporterLogging ISettingsHandler 46 EnableMapCache ISettingsHandler 46 EnableProtocolChannelConfiguration ISettingsHandler 47 EnableProtocolConfiguration ISettingsHandler 47 EnableReferenceConfiguration ISettingsHandler 47 EnableUserAdministration ISettingsHandler 43 EnableVariableConfiguration ISettingsHandler 47 ErrorFreeMeasurementChainAtlnit ISettingsHandler 47 ExpertMode ISettingsHandler 47 ExportDefaultDirectory ISettingsHandler 47 ExportEnvironment ISettingsHandler 44 FontSize ISettingsHandler 47 Formatld IDataPlugln 28 GetEnumerator ICloudDrives 25 IDataPlugins 29 IPlugInOptions 34 IPlugins 3
8. 1 54 COMMAND ONLINEVIEW LAYOUT 2 2 1 55 COMMAND SHOW SCREEN LIST 56 COMMAND ONLINEVIEW ADD TRACKING DIAGRAM 57 COMMAND ONLINEVIEW ADD XY DIAGRAM 58 COMMAND ONLINEVIEW ADD YT OSCILOSCOPE 59 COMMAND ONLINEVIEW ADD DISPLAY 60 COMMAND ONLINEVIEW ADD BAR INSTRUMENT 61 COMMAND ONLINEVIEW ADD INSTRUMENT 62 COMMAND ONLINEVIEW ADD POINTER INSTRUMENT 63 COMMAND ONLINEVIEW ADD SLIDER INSTRUMENT 64 COMMAND ONLINEVIEW ADD DIGITAL INSTRUMENT 65 COMMAND ONLINEVIEW ADD SWITCH INSTRUMENT 66 COMMAND ONLINEVIEW ADD VIDEO DISPLAY 67 COMMAND LOAD DATA FILE 68 COMMAND CLEAR DATA POOL 69 COMMAND DATA FILE 70 COMMAND ANALYZE IN EXCEL e 71 COMMAND SHOW DATA FILES 72 COMMAND ANALYSIS ADD SCREEN 73 COMMAND ANALYSIS ADD GROUP e 74 COMMAND ANALYSIS LAYOUT FIXED 75 COMMAND ANALYSIS LAYOUT FREE 76 COMMAND ANALYSIS LAYOUT 1 1 IPEmotion COM Reference IPETRONIK GmbH amp Co KG 18 60 IPEmotionSettings Namespace Documentation T RO N K e 77 COMMAND ANALYSIS LAYOUT 2 1 78 COMMAND ANALYSIS LAYOUT 3 1 79 COMMAND ANALYSIS LAYOUT 2 2 1 80 COMMAND ANALYSIS ADD LINE DIAGRAM 81 COMMAND ANALYSIS ADD VIDEO DISPLAY 82 COMMAND ANALYSIS 700 TYPE PANNING 83 COMMAND ANALYSIS 700 TYPE STRETCHING 84 COMMAND ANALYSIS 700 TYPE RUBBERBAND 85 COMMAND ANALYSIS 2008 UN
9. GetOptionValue string optionName Returns the value assigned to the named data plug in option Parameters optionName Name of the data plug in option 6 3 2 2 object GetOptionValue string optionName Returns the value assigned to the named data plug in option Parameters optionName Name of the data plug in option IPEmotion COM Reference IPETRONIK GmbH amp Co KG 27 60 IPEmotionSettings Interface Documentation RO N 6 3 2 3 void SetOptionValue string optionName object valueToSet Sets the value of the named data plug in option Parameters optionName Name of the data plug in option valueToSet Value to be set for the named data plug in option 6 3 2 4 void SetOptionValue string optionName object valueToSet Sets the value of the named data plug in option Parameters optionName Name of the data plug in option valueToSet Value to be set for the named data plug in option 6 3 3 Property Documentation 6 3 31 string Formatld get Returns the data plug in format identifier 6 3 3 2 IPluglInOptions Options get Returns the options list of the data plug in IPEmotion COM Reference IPETRONIK GmbH amp Co KG 28 60 IPEmotionSettings Interface Documentation RO N 6 4 IDataPlugins Interface Reference Data plug in list interface Public Member Functions IEnumerator GetEnumerator Enumerator for the data plug in list Enumerator GetEnumerator Enumerator
10. LICENSEE promptly notifies IPETRONIK of such claim in writing at support ipetronik com and gives IPETRONIK exclusive control over the defense and settlement of such claim iv LICENSEE provides such cooperation and assistance at IPETRONIK S expense as IPETRONIK may reasonably request to settle or oppose any such claim and v such claim of infringement is based only on the licensed SOFTWARE and documentation as provided to LICENSEE IPEmotion COM Reference IPETRONIK GmbH amp Co KG 3 60 Important general information TRON In the event any infringement claim for which IPETRONIK liable pursuant to section 5 IPETRONIK may at its sole option and expense i procure for LICENSEE the right to continue using the licensed SOFTWARE or documentation ii modify or amend the licensed SOFTWARE or documentation so that it becomes non infringing iii replace the licensed SOFTWARE or documentation with a non infringing substitute or iv recover the infringing licensed software and documentation from LICENSEE and repay to LI CENSEE all license fees paid to IPETRONIK in connection therewith less a reasonable amount based on LICENSEE s use prior to such recovery and refund C This Article 5 sets forth IPETRONIK s sole obligations and liability for intellectual property infringe ment These indemnity provisions only apply to the SOFTWARE as originally licensed to LICENSEE and do not cover any MODIFICATIONS made by L
11. LimitMessageDisplayTime 48 LoadLastConfigurationOnStart 49 MapCacheSize 49 MaplmagerySource 49 MapTilesProxyTcpPortNumber 49 MaxPollingListCount 49 MergeDataFilesOnlmport 49 NoValueTimeout 49 OnlineYtDiagramHistoryBufferDepth 49 OnlineYtDiagramHistoryBufferResolution 50 PerformanceOptimization 50 PluginList 50 ProjectDataDefaultDirectory 50 Quit 44 RawDataDefaultDirectory 50 RemoveHotKey 45 SaveSettings 45 ScriptingDefaultDirectory 50 SelectedPlotHighlightType 50 SetPreferredUnit 45 SharedTimeChannel 50 ShowToolTips 50 SignalConfigurationMode 50 Skin 51 SplitFileSize 51 StorageDataDefaultDirectory 51 TimeChannellsAbsolut 51 TimeZoneDisplayType 51 UseDisplayNames 51 UseExtendedCursorValues 51 UseHardwareDetectionAction 51 UseStandardDialogs 52 IsReferencePart IReferenceObject 36 IsUserAdministrationActive ISettingsHandler 48 Item ICloudDrives 26 IDataPluglIns 29 IPluginOptions 34 IPlugins 35 IReferenceObjects 37 IUserAccounts 56 IUserAccount 53 Active 53 CanConfigurate 53 CanModifyStatus 53 Password 53 UserLevel 53 Username 53 IUserAccounts 55 AddUser 55 Count 56 GetEnumerator 55 Item 56 RemoveUser 56 JobConfiguration IPEmotion COM Reference ISettingsHandler 48 LayoutDefaultDirectory ISettingsHandler 48 LimitMessageDisplayTime ISettingsHandler 48 LoadLastConfigurationOnStart ISettingsHandler 49 LoginName ICloudDrive 23 MA
12. Remarks The password must match the password of the administrator account otherwise no user account list will be returned 6 11 2 11 void ImportEnvironment string fileName Imports a working environment file overwriting the actual settings Parameters fileName Name of the working environment file to be imported x ief IPEmotion COM Reference IPETRONIK GmbH amp Co KG 44 60 IPEmotionSettings Interface Documentation RO N 6 11 2 12 void Quit Terminates the program Remarks Modified settings will not be saved automatically Call SaveSettings to save the modifications 6 11 2 13 void RemoveHotKey UiCommand int parameter Removes a hot key from a command Parameters Command id parameter Optional parameter index of script screen Remarks In case the command does not support a parameter the parameter value must be set to 1 6 11 2 14 void SaveSettings Saves the modified settings 6 11 2 15 void SetPreferredUnit PhysicalDimensionTypes physicalDimension string preferredUnit Sets the preferred Unit for a given physical dimension Parameters physicalDimension Type the physical dimension preferredUnit Symbol of the preferred unit 6 11 3 Property Documentation 6 11 3 1 int AnalysisDiagramCurveQuality get set Specifies whether the analysis diagrams uses all measured values or only samples when drawing the curves Remarks Only value
13. sets the maximum size of an acquisition file before it is split string StorageDataDefaultDirectory get set IPEmotion COM Reference IPETRONIK GmbH amp Co KG 41 60 IPEmotionSettings Interface Documentation RO N Specifies the default directory where measurement data files can be loaded from bool TimeChannellsAbsolut get set Specifies whether the IPEmotion time channels are displayed in relative time or absolute time TimeZoneDisplayType TimeZoneDisplayType get set Specifies whether absolute times are displayed referring to the local time zone of the analysys system the local time zone of the measurement system or as UTC time bool UseDisplayNames get set Specifies whether the display instruments use the display name instead of the channel name bool UseExtendedCursorValues get set Specifies whether the values of the cursors should be displayed in a separate window instead of directly beside the crosshair bool UseHardwareDetectionAction get set Returns or sets if a specific configuration action should be performed after a succesfull automatic hardware detection on IPEmotion start bool UseStandardDialogs get set Specifies whether the Windows standard file open save dialog is user or the IPEmotion specific variant 6 11 1 Detailed Description IPEmotion settings handler interface 6 11 2 Member Function Documentation 6 11 2 1 void ActivatePlugln string pluginName Activates a
14. simultaneously It will only change the options of the latest installed version of IPEmotion To change the IPEmotion options you need to write a script or program that uses the COM interface provided by the IPEmotionSettings program The actual options are loaded at program startup and will be changed only if the interface function SaveSet tings is called The IPEmotionSettings program must be terminated by calling the interface function Quit before IPEmotion will be started IPEmotionSettings IP TRONIK 2 1 IPEmotionSettings Interfaces Overview Namespace IPETRONIK IPEmotionSettings ISettingsHandler IUserAccounts IDataPlugins IPlugIns ICloudaDrives Plugin IDataPlugin ICloudDrive IPluginOptions IPlugInOption IReferenceObjects IPlugInOptions IReferenceObject IPluginOption IPEmotion COM Reference IPETRONIK GmbH amp Co KG 8 60 Chapter 3 IPEmotionSettings Namespace Index 3 1 IPEmotionSettings Namespace List The following chapter lists all namespaces with brief descriptions IPEmotionSettings Namespace of the IPEmotion settings interface IPEmotionSettings Namespace Index TRON IPEmotion IPETRONIK GmbH amp KG 10 60 Chapter 4 IPEmotionSettings Interface Index 4 1 IPEmotionSettings Interface List The following chapter lists all interfaces with brief descriptions ICloudDrive Cloud drive
15. specific plug in Parameters pluginName Name of the plug in to be activated 6 11 2 2 void ActivatePlugInVersion string pluginName string pluginVersion Activates a specific plug in version Parameters pluginName Name of the plug in to be activated pluginVersion Version of the plug in to be activated Remarks In case no version is given the default version will be used IPEmotion COM Reference IPETRONIK GmbH amp Co KG 42 60 IPEmotionSettings Interface Documentation RO N 6 11 2 3 void AddHotKey UiCommand commandld Keys key int parameter Adds a hot key to a command Parameters commandid Command id key Hotkeys key code parameter Optional parameter index of script screen Remarks In case the command does not support a parameter the parameter value must be set to 1 6 11 2 4 bool ChangeAdminPassword string oldAdminPassword string newAdminPassword Changes the password of the adminiatrator account Parameters oldAdminPassword Old password of the adminiatrator account newAdminPassword New password of the adminiatrator account Remarks The old password must match the password of the administrator account otherwise no change will hap pen It is recomended to assign a non empty password for the administrator account Returns True in case the password was changed otherwise false 6 11 2 5 void DeactivatePlugln string pluginName Deactivates a plug in Parameter
16. 1 3 53 string Skin get set Returns or sets the name of the skin to be used by the IPEmotion Ul Remarks The following skins are available IPETRONIK2 Blue IPETRONIK DarkBlue Skin Dark blue IPETRONIK Black Skin Black IPETRONIK LightBlue Skin Light blue IPETRONIK Grey Skin Grey IPETRONIK Bright Skin Bright 6 11 3 54 int SplitFileSize get set Returns or sets the maximum size of an acquisition file before it is split Remarks Only values from 1048576 1 MByte up to 1073741824 1 GByte are allowed 6 11 3 55 string StorageDataDefaultDirectory get set Specifies the default directory where measurement data files can be loaded from 6 11 3 56 bool TimeChannellsAbsolut get set Specifies whether the IPEmotion time channels are displayed in relative time or absolute time 6 11 3 57 TimeZoneDisplayType TimeZoneDisplayType get set Specifies whether absolute times are displayed referring to the local time zone of the analysys system the local time zone of the measurement system or as UTC time Remarks This setting affects the display of absolute times only if the loaded data contains the necessary informa tions 6 11 3 58 bool UseDisplayNames get set Specifies whether the display instruments use the display name instead of the channel name 6 11 3 59 bool UseExtendedCursorValues get set Specifies whether the values of the cursors should be displayed in a separate window instead of d
17. 5 IReferenceObjects 37 IUserAccounts 55 GetOption Value IDataPlugIn 27 31 GetPreferredUnit ISettingsHandler 44 GetUserAccounts ISettingsHandler 44 HardwareDetectionAction INDEX IPEmotionSettings 15 ISettingsHandler 47 HardwareDetectionOnStart ISettingsHandler 48 HudTransparency ISettingsHandler 48 ICloudDrive 23 Active 23 LoginName 23 MappedDrive 24 Name 24 Password 24 Url 24 ICloudDrives 25 AddCloudDrive 25 Count 26 GetEnumerator 25 26 RemoveCloudDrive 26 IDataPlugln 27 Formatld 28 GetOptionValue 27 Options 28 SetOptionValue 27 28 IDataPluglns 29 Count 29 GetEnumerator 29 Item 29 IgnoreVerbalTable ISettingsHandler 48 ImportDefaultDirectory ISettingsHandler 48 ImportEnvironment ISettingsHandler 44 IncludeExternalFilesInConfiguration ISettingsHandler 48 IncludeOptionsInConfiguration ISettingsHandler 48 InitViewPagesAtFirstVisibility ISettingsHandler 48 IPEmotionSettings 13 CharacteristicSupport 14 ConfigurationPriority 15 HardwareDetectionAction 15 MAP IMAGERY SOURCE 15 PhysicalDimensionTypes 15 SelectedPlotHighlightType 16 SignalConfigurationMode 16 TimeZoneDisplayType 16 UiCommand 17 UserLevel 21 IPlugln 31 Active 32 GetOptionValue 31 Options 32 PreferredVersion 32 ReferenceObjectList 32 SetOptionValue 31 TypeName 32 IPlugInOption 33 IPEmotion COM Reference IP TRONIK Name 33 Value 33
18. AS PDF e 16 COMMAND PRINT PREVIEW 17 COMMAND CREATE RUNTIME VERSION e 18 COMMAND PRINT EXCEL e 19 COMMAND PRINT HTML e 20 COMMAND PRINT RTF e 21 COMMAND PRINT IMAGE 22 COMMAND PRINT EXPORTV e 23 COMMAND SHOW MESSAGE WINDOW e 24 COMMAND RESET USER SETTINGS 25 COMMAND SHOW OPTIONS DIALOG 26 COMMAND CREATE SUPPORT FILE 27 COMMAND QUIT PROGRAM 28 COMMAND EDIT DELETE 29 COMMAND EDIT CLEAR 30 COMMAND SHOW ITEM PROPERTIES IPEmotion COM Reference IPETRONIK GmbH amp Co KG 17 60 IPEmotionSettings Namespace Documentation T RO N K e 91 COMMAND SHOW HELP 32 COMMAND BUILD CONFIGURATION 33 COMMAND USE USER GUIDE 34 COMMAND ADJUST WITH SENSORDATABASE 35 COMMAND DETECT HARDWARE 36 COMMAND INIT HARDWARE 97 COMMAND RESET HARDWARE 38 COMMAND SYNC HARDWARE e 39 COMMAND SHOW HARDWARE DETAILS 40 COMMAND ADD CALCULATION 41 COMMAND ADD STORAGE GROUP 42 COMMAND ADD LIMIT 43 COMMAND SHOW AQUISITION DETAILS 44 COMMAND START AQUISITION 45 COMMAND START RECORD DATA 46 COMMAND PAUSE AQUISITION 47 COMMAND ONLINEVIEW ADD SCREEN 48 COMMAND ONLINEVIEW ADD GROUP 49 COMMAND ONLINEVIEW LAYOUT FIXED 50 COMMAND ONLINEVIEW LAYOUT FREE 51 COMMAND ONLINEVIEW LAYOUT 1 1 52 COMMAND ONLINEVIEW LAYOUT 2 1 53 COMMAND ONLINEVIEW LAYOUT 3
19. DO 86 COMMAND ANALYSIS SYNCHRONIZED 700 87 COMMAND ANALYSIS OPTIMAL RANGE 88 COMMAND ANALYSIS ORIGINAL RANGE 89 COMMAND ANALYSIS FIRST CURSOR 90 COMMAND ANALYSIS SECOND CURSOR 91 COMMAND ANALYSIS START REPLAY 92 COMMAND ANALYSIS STOP REPLAY 93 COMMAND ANALYSIS SHOW FILES 94 COMMAND SCRIPTING 95 COMMAND SCRIPTING START RECORDING 96 COMMAND SCRIPTING STOP RECORDING 97 COMMAND SCRIPTING SHOW SCRIPT LIBRARY 98 COMMAND SCRIPTING SHOW SCRIPT DETAILS 99 COMMAND ADD 100 COMMAND ADD VARIABLE DOUBLE e 101 COMMAND ADD VARIABLE STATUS 102 COMMAND ADD VARIABLE TEXT 103 COMMAND ADD FUNCTION GENERATOR FILE 104 COMMAND ADD FUNCTION GENERATOR RAMP 105 COMMAND ADD FUNCTION GENERATOR RECTANGLE 106 COMMAND ADD FUNCTION GENERATOR SAWTOOTH 107 COMMAND ADD FUNCTION GENERATOR SINE 108 COMMAND ADD CONTROLLER 109 COMMAND ONLINEVIEW ADD FFT OSCILOSCOPE e 110 COMMAND ONLINEVIEW ADD BUTTON 111 COMMAND ANALYSIS ADD DIAGRAM 112 COMMAND ONLINEVIEW ADD LOG DIAGRAM 113 COMMAND ANALYSIS ADD LOG PH DIAGRAM 114 COMMAND FULLSCREEN 115 COMMAND PRINT REPORT 116 COMMAND PRINT REPORT ONCE e 117 COMMAND REPORT 5 PDF 118 COMMAND REPORT AS HTML 119 COMMAND REPORT AS IMAGE 120 COMMAND
20. DataPlugins DataExportPluginList get Returns the list of available data export plug ins IDataPlugins DatalmportPluginList get Returns the list of available data import plug ins bool DisplayExtendedTabs get set Returns or sets whether extended dialog tabs like the format tab of channels are displayed bool EnableAdditionalWarnings get set Returns or sets whether additional warnings are displayed in popup windows when expert mode is active bool EnablelmporterLogging get set Returns or sets whether warnings and errors appearing during import are written to a log file bool EnableMapCache get set Specifies whether caching of map tiles is enabled bool EnableProtocolChannelConfiguration get set Returns or sets whether the scaling of channels imported from a description file can be edited bool EnableProtocolConfiguration get set Returns or sets whether protocol nodes are visible in the hardware tree when the expert mode is active bool EnableReferenceConfiguration get set Returns or sets whether the channel references can be configured in the plug in options when expert mode is active bool EnableVariableConfiguration get set Returns or sets whether variable channels are available when the expert mode is active IPEmotion COM Reference IPETRONIK GmbH amp Co KG 39 60 IPEmotionSettings Interface Documentation RO N bool ErrorFreeMeasurementChainAtlnit get set Ret
21. ICENSEE or any other third party 6 Limitation of Liability a EXCEPT WITH RESPECT TO ITS INTELLECTUAL PROPERTY INDEMNIFICATION OBLIGA TIONS AS SET FORTH IN ARTICLE 5 IN NO EVENT SHALL IPETRONIK BE LIABLE FOR SPE CIAL INDIRECT OR CONSEQUENTIAL DAMAGES INCLUDING WITHOUT LIMITATION LOST PROFITS LOST DATA OR LOST SAVINGS EVEN IF IPETRONIK WAS ADVISED OF THE POS SIBILITY OF SUCH DAMAGES FURTHERMORE IPETRONIK S LIABILITY WHETHER IN CON TRACT TORT OR OTHERWISE ARISING OUT OF OR CONNECTED WITH THIS AGREEMENT OR THE LICENSED SOFTWARE OR DOCUMENTATION SHALL IN NO CASE EXCEED THE PAY MENTS RECEIVED BY IPETRONIK FROM LICENSEE FOR THE LICENSED SOFTWARE AND DOCUMENTATION b EXCEPT IN CONNECTION WITH ITS OBLIGATIONS UNDER ARTICLE 5 i IN NO EVENT SHALL LICENSEE BE LIABLE FOR SPECIAL INDIRECT OR CONSEQUEN TIAL DAMAGES INCLUDING WITHOUT LIMITATION LOST PROFITS LOST DATA OR LOST SAVINGS EVEN IF LICENSEE WAS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES AND ii LICENSEE S LIABILITY WHETHER IN CONTRACT TORT OR OTHERWISE ARISING OUT OF OR CONNECTED WITH THIS AGREEMENT OR THE LICENSED SOFTWARE OR DOCU MENTATION SHALL IN NO CASE EXCEED THE PAYMENTS OWED TO LICENSOR FOR THE LICENSED SOFTWARE AND DOCUMENTATION 7 Indemnification Obligations of LICENSEE a LICENSEE shall defend indemnify and hold IPETRONIK harmless from any claims losses ex penses fees including attorneys fees costs or damages arising in connection
22. IP TRONIK IP motion Software IPEmotionSettings COM Manual Version 2014 0 February 2014 Table contents 1 Important and general information 1 1 12 Important informati n General information uua no coe e as as OE ee Pde A 2 IPEmotionSettings 21 IPEmotionSettings Interfaces Overview 3 IPEmotionSettings Namespace Index 31 IPEmotionSettings Namespace 4 IPEmotionSettings Interface Index 4 1 IPEmotionSettings Interface List 5 IPEmotionSettings Namespace Documentation 5 1 IPEmotionSettings Namespace 6 IPEmotionSettings Interface Documentation 6 1 ICloudDrive Interface Reference 6 2 ICloudDrives Interface Reference 6 3 IDataPlugin Interface Reference 6 4 IDataPlugins Interface Reference 65 IPlugin Interface Reference 6 6 IPluglnOption Interface Reference 67 IPluglnOptions Interface 6 8 5 Interface 6 9 IReferenceObject Interface Reference 6 10 IReferenceObjects Interface
23. Name Imports a working environment file overwriting the actual settings void Quit Terminates the program void RemoveHotKey UiCommand commandld int parameter hot key from a command void SaveSettings Saves the modified settings void SetPreferredUnit PhysicalDimensionTypes physicalDimension string preferredUnit Sets the preferred Unit for a given physical dimension IPEmotion COM Reference IPETRONIK GmbH amp Co KG 38 60 IPEmotionSettings Interface Documentation RO N Properties int AnalysisDiagramCurveQuality get set Specifies whether the analysis diagrams uses all measured values or only samples when drawing the curves bool AutoAdministration get set Returns or sets whether the autotomatic service administration is used CharacteristicSupport CharacteristicSupport get set Returns or sets the way characteristics are handled during import ICloudDrives CloudDrives get Returns the list of registered cloud drives string ConfigDefaultDirectory get set Specifies the default directory for loading and saving configuration files string Culture get set Returns or sets the localization of the IPEmotion Ul string CustomDataDefaultDirectory get set Specifies the default directory where user specific data is loaded from and stored to string DatabaseDefaultDirectory get set Specifies the default directory for database files I
24. P IMAGERY SOURCE IPEmotionSettings 15 MapCacheSize ISettingsHandler 49 MaplmagerySource ISettingsHandler 49 MappedDrive ICloudDrive 24 MapTilesProxyTcpPortNumber ISettingsHandler 49 MaxPollingListCount ISettingsHandler 49 MergeDataFilesOnlmport ISettingsHandler 49 Name ICloudDrive 24 IPlugInOption 33 NoValueTimeout ISettingsHandler 49 OnlineYtDiagramHistoryBufferDepth ISettingsHandler 49 OnlineYtDiagramHistoryBufferResolution ISettingsHandler 50 Options 28 IPlugin 32 Password ICloudDrive 24 IUserAccount 53 PerformanceOptimization ISettingsHandler 50 PhysicalDimensionTypes IPEmotionSettings 15 PluginList ISettingsHandler 50 PreferredVersion IPlugin 32 Priority IReferenceObject 36 ProjectDataDefaultDirectory ISettingsHandler 50 Quit ISettingsHandler 44 RawDataDefaultDirectory ISettingsHandler 50 ReferenceObjectL ist IPETRONIK GmbH amp Co KG 59 60 INDEX IPlugin 32 RemoveCloudDrive ICloudDrives 26 RemoveHotKey ISettingsHandler 45 RemoveUser IUserAccounts 56 SaveSettings ISettingsHandler 45 ScriptingDefaultDirectory ISettingsHandler 50 SelectedPlotHighlightType IPEmotionSettings 16 ISettingsHandler 50 SetOptionValue IDataPlugln 27 28 IPlugin 31 SetPreferredUnit ISettingsHandler 45 SharedTimeChannel ISettingsHandler 50 ShowToolTips ISettingsHandler 50 SignalConfigurationMode IPEmotionSettings 16 ISettingsHandler 50
25. PETRONIK GmbH amp Co KG and is protected by copyright laws Its total or partial reproduction is strictly forbidden A valid software license is required to use the software IMPORTANT READ CAREFULLY THIS IS A LEGAL AGREEMENT BETWEEN YOU LICENSEE AND IPETRONIK GMBH 8 CO KG IPETRONIK INC IPETRONIK BY CHECKING I ACCEPT ALL OF THE TERMS CONTAINED IN THE ABOVE AGREEMENT DURING INSTALLATION COPYING OR USING THIS PRODUCT IN ANY WAY YOU ACKNOWLEDGE THAT YOU HAVE READ THIS LICENSE AND THAT YOU UNDERSTAND AND EXPRESSLY AGREE TO BE BOUND BY THE TERMS AND CONDITIONS SET FORTH BELOW 1 Definitions a SOFTWARE is defined as computer program in object code or machine readable format together with any and all modifications enhancements updates and improvements provided by IPETRONIK as well as any subsequent versions corrections bug fixes enhancements updates or other modi fications regardless of the source The term Licensed Software shall not include the source code version of the Licensed Software b EQUIPMENT is defined as automotive measuring equipment produced by IPETRONIK as well as other parties c LICENSEE is defined as the recipient of this SOFTWARE and any of its employees agents or repre sentatives d MODIFY or MODIFICATION is defined as change to the SOFTWARE by LICENSEE in order to customize the SOFTWARE for use solely by LICENSEE 2 License Terms a Aslong as LICENSEE complies with all terms in this
26. RTY WHO HAS BEEN INVOLVED IN THE CREATION PRODUCTION OR DELIVERY OF THE SOFTWARE BE LIABLE FOR SPECIAL DIRECT INDIRECT INCIDENTAL OR CONSEQUENTIAL DAMAGES INCLUDING LOSS OF PROFITS OR INABILITY TO USE THE LICENSED MATERIAL IN NO EVENT SHALL IPETRONIK S LIABILITY FOR ANY DAMAGES OR LOSS TO LICENSEE OR TO ANY THIRD PARTY EXCEED ANY LICENSE FEE ACTUALLY PAID BY THE LICENSEE TO IPETRONIK FOR THE SOFTWARE c Since some states or jurisdictions do not permit the exclusion of implied warranties or limitation of liability for consequential damages in such states or jurisdictions the liability is limited to the fullest extent permitted by law 5 Intellectual Property Infringement Indemnification a IPETRONIK shall defend indemnify and hold LICENSEE harmless from and against any claims and fees including attorneys fees damage awards arising in connection with a claim that the licensed SOFTWARE or documentation when properly used infringes upon any presently existing valid and enforceable United States patent trademark or other intellectual property right provided that i such claim of infringement is not based on any Modification or action taken or suffered by Ll CENSEE other than the use of the licensed SOFTWARE and documentation in accordance with the terms and conditions of this agreement ii such claim of infringement is not based on any action by LICENSEE in modifying the SOFTWARE pursuant to the terms of Section 2 d iii
27. STATUS WINDOW COMMAND SHOW STATUS WINDOW COMMAND SHOW STORAGE STATUS WINDOW COMMAND SHOW OUTPUT WINDOW COMMAND RESET TEMPLATES COMMAND RESET FORMULA POOL COMMAND LOGIN COMMAND LOGOUT COMMAND SIGNALS SHUNT CHECK COMMAND MEASUREMENT ADD CLASSIFICATION SAMPLE COUNT COMMAND MEASUREMENT ADD CLASSIFICATION TIME AT LEVEL COMMAND MEASUREMENT ADD CLASSIFICATION FROM TO COUNT COMMAND MEASUREMENT ADD CLASSIFICATION LEVEL CROSSING COMMAND MEASUREMENT ADD CLASSIFICATION TRANSITION MATRIX COMMAND MEASUREMENT ADD CLASSIFICATION RAINFLOW COMMAND MEASUREMENT ADD CLASSIFICATION SAMPLE COUNT COMPOUND COMMAND MEASUREMENT ADD CLASSIFICATION TIME AT LEVEL COMPOUND COMMAND MEASUREMENT ADD ROUTER COMMAND ONLINEVIEW ADD HISTOGRAM COMMAND ONLINEVIEW ADD TABLE COMMAND ONLINEVIEW ADD MAP IPEmotion COM Reference IPETRONIK GmbH amp Co KG 20 60 IPEmotionSettings Namespace Documentation T RO N K e 169 COMMAND ANALYSIS ADD MAP e 170 COMMAND REPORTING ADD ARROW BACK e 171 COMMAND REPORTING ADD ARROW HORIZONTAL e 172 COMMAND REPORTING ADD ARROW VERTICAL e 173 COMMAND REPORTING ADD ARROW START e 174 COMMAND REPORTING ADD ARROW BACK START 175 COMMAND REPORTING ADD ARROW VERTICAL START 176 COMMAND REPORTING ADD ARROW HORIZONTAL START 177 COMMAND REPORTING ADD TABLE e 178 COMMAND EDIT PASTE BEHIND e 179 COMMAND EDIT COPY
28. Skin ISettingsHandler 51 SplitFileSize ISettingsHandler 51 StorageDataDefaultDirectory ISettingsHandler 51 TimeChannellsAbsolut ISettingsHandler 51 TimeZoneDisplay Type IPEmotionSettings 16 ISettingsHandler 51 TypeName 32 IReferenceObject 36 UiCommand IPEmotionSettings 17 Url ICloudDrive 24 UseDisplayNames ISettingsHandler 51 UseExtendedCursorValues ISettingsHandler 51 UseHardwareDetectionAction ISettingsHandler 51 UserLevel IPEmotionSettings 21 IUserAccount 53 Username IUserAccount 53 UseStandardDialogs ISettingsHandler 52 Value IPEmotion COM Reference 33 IPETRONIK GmbH amp Co KG IP TRONIK 60 60
29. Software License Agreement IPETRONIK grants LICENSEE a non exclusive non transferable license to load and use the SOFTWARE upon the terms and conditions set forth below b LICENSEE has the right to load the SOFTWARE for use on any internal computer or piece of EQUIP MENT as long as it is only on one computer or piece of EQUIPMENT at any given time c LICENSEE will notify all of its employees agents or representatives permitted access to the SOFT WARE of the duties and obligations under this Software License Agreement IPEmotion COM Reference IPETRONIK GmbH amp Co KG 2 60 Important general information TRON d LICENSEE has the right to MODIFY the SOFTWARE for use on any internal computer EQUIP MENT as long as it is only on one computer or piece of EQUIPMENT at any given time e Any MODIFICATION S to the SOFTWARE are subject to the terms and conditions of this Agreement f LICENSEE may not i Loan rent lease give sublicense distribute transmit or otherwise transfer the SOFTWARE or otherwise exercise any of IPETRONIK s legal rights in and to the SOFTWARE or any deriva tive works of the SOFTWARE in whole or in part except with the prior written agreement of IPETRONIK ii Copy translate reverse engineer decompile disassemble the SOFTWARE in whole or in part iii Except as provided is Section 2 d create derivative works based on the SOFTWARE in whole or in part iv Remove modify o
30. ation values are available 0 1 Bold the curve is drawn with an increased line width 2 NoHighlightning no highlightning Flash the seelcted curve is flashing 5 1 2 7 enum SignalConfigurationMode Enumeration of available configuration modes Remarks The following enumeration values are available 0 CONFIGURATION_MODE_HARDWARE Hardware centric configuration 1 CONFIGURATION_MODE_MEASURE_POINT Configuration based a measurement point plan IPEmotion COM Reference IPETRONIK GmbH amp Co KG 16 60 IPEmotionSettings Namespace Documentation T RO N K 5 1 2 8 enum TimeZoneDisplayType Enumeration of supported time zones used to diaplay absolute times in the analysis Remarks The following enumeration values are available 0 Utc UTC 1 Local local time zone of the analysis PC 2 Source local time zone of the measurement file 5 1 2 9 enum UiCommand Enumeration of available shortcut commands Remarks The following enumeration values are available e 0 COMMAND FILE NEW 1 COMMAND FILE SAVE e 2 COMMAND FILE SAVE AS 3 COMMAND FILE OPEN 4 COMMAND PRINT e 5 COMMAND EDIT CUT 6 COMMAND EDIT COPY 7 COMMAND EDIT PASTE 8 COMMAND EDIT UNDO 9 COMMAND EDIT 10 COMMAND SCRIPTING NEW SCRIPT e 11 COMMAND SCRIPTING IMPORT 12 COMMAND ABOUT 13 COMMAND NEW SCRIPT GROUP e 14 COMMAND PRINT ONCE e 15 COMMAND PRINT
31. ator 6 2 2 3 void RemoveCloudDrive ICloudDrive cloudDriveToRemove Removes a cloud drive from the cloud drives list Parameters cloudDriveToRemove Interface of the cloud drive to be removed from the list 6 2 3 Property Documentation 6 2 31 Count get Count of cloud drives in this list 6 2 3 2 ICloudDrive Item int index get Returns the cloud drive with the given zero based index from this list Parameters index Index of the cloud drive in this list Returns Interface of the cloud drive IPEmotion COM Reference IPETRONIK GmbH amp Co KG 26 60 IPEmotionSettings Interface Documentation RO N 6 3 IDataPlugin Interface Reference Data plug in interface Public Member Functions object GetOptionValue string optionName Returns the value assigned to the named data plug in option object GetOptionValue string optionName Returns the value assigned to the named data plug in option void SetOptionValue string optionName object value ToSet Sets the value of the named data plug in option void SetOptionValue string optionName object value ToSet Sets the value of the named data plug in option Properties string Formatld get Returns the data plug in format identifier IPluglnOptions Options get Returns the options list of the data plug in 6 3 1 Detailed Description Data plug in interface 6 3 2 Member Function Documentation 6 3 2 1 object
32. ctive get set Specifies whether the plug in is active PluglInOptions Options get Returns the options list of the plug in e string PreferredVersion get set Specifies the preferred plug in version ReferenceObjects ReferenceObjectList get Returns the reference object list of the plug in string TypeName get Returns the plug in type name 6 5 1 Detailed Description Plug in interface 6 5 2 Member Function Documentation 6 5 2 1 object GetOptionValue string optionName Returns the value assigned to the named plug in option Parameters optionName Name of the plug in option 6 5 2 2 void SetOptionValue string optionName object valueToSet Sets the value of the named plug in option Parameters optionName Name of the plug in option valueToSet Value to be set for the named plug in option IPEmotion COM Reference IPETRONIK GmbH amp Co KG 31 60 IPEmotionSettings Interface Documentation RO N 6 5 3 Property Documentation 6 5 3 1 bool Active get set Specifies whether the plug in is active 6 5 3 2 IPluglnOptions Options get Returns the options list of the plug in 6 5 3 3 string PreferredVersion get set Specifies the preferred plug in version Remarks In case the latest installed plug in version should be used an empty string should be set 6 5 3 4 IReferenceObjects ReferenceObjectList get Returns the reference object list of the plug in 6 5 3 5 strin
33. cy operation monitoring of critical values Please check the following points to avoid errors of sensors to components of the electrical system electronics brake system engine and transmission control chassis body Tap or several bus systems CAN LIN ETHERNET including the required electrical con nection s for data acquisition e Communication with the vehicle s control units ECUs especially with such of the brake system and or of the engine and transmission control power train control system Installation of components for remote data transmission mobiles GSM GPRS modems WiFi and Bluetooth components 4 Before directly or indirectly using the data acquired by an IPETRONIK measurement system to calibrate control units please review the data regarding to plausibility 5 With regard to the application of IPETRONIK products in vehicles during use on public roads the man ufacturer and or registered user of the vehicle has to ensure that all changes modifications have no influence concerning the license of the vehicle or its license of operation 6 User does agree to the instructions and regulations as mentioned above In case the user does not agree with the instructions and regulations as mentioned above he has to notify this expressly and immediately in writing to IPETRONIK before confirming the sales contract Important general information TRON 1 1 2 Liability
34. es whether the user can modify the status 6 12 2 4 string Password get set Returns or sets the user password 6 12 2 5 UserLevel UserLevel get set Specifies the access level of the user IPEmotion COM Reference IPETRONIK GmbH amp Co KG 53 60 IPEmotionSettings Interface Documentation TRON 6 12 2 6 string Username get Returns the name of the user IPEmotion COM Reference IPETRONIK GmbH amp Co KG 54 60 IPEmotionSettings Interface Documentation RO N 6 13 lUserAccounts Interface Reference User account list interface Public Member Functions lUserAccount AddUser string nameOfUser string userPassword UserLevel accessLevel bool enab bleConfig bool enabbleStatusModification Adds a new user to the user account list IEnumerator GetEnumerator for the user account list void RemoveUser string nameOfUser a user from the user account list Properties int Count get Count of user accounts in this list e UserAccount Item int index get Returns the user account with the given zero based index from this list 6 13 1 Detailed Description User account list interface 6 13 2 Member Function Documentation 6 13 2 1 IUserAccount AddUser string nameOfUser string userPassword UserLevel accessLevel bool enabbleConfig bool enabbleStatusModification Adds a new user to the user account l
35. ess levels 5 1 1 Detailed Description Namespace of the IPEmotion settings interface 5 1 2 Enumeration Type Documentation 5 1 2 1 enum CharacteristicSupport Enumeration of available characteristic support types Remarks The following enumeration values are available IPEmotion COM Reference IPETRONIK GmbH amp Co KG 14 60 IPEmotionSettings Namespace Documentation T RO N K 0 AsCharacteristic import as characteristic 1 AsMeasurement conversion to measurement 2 Ignore no import at all 5 1 2 2 enum ConfigurationPriority Enumeration of available usage priorities Remarks The following enumeration values are available 0 High Use this setting for your preferred hardware 1 Standard The default setting 2 Low Use this for hardware you own but don t want to be used 3 NotUsed Removes this type of hardware from the list of available hardware 5 1 2 3 enum HardwareDetectionAction Enumeration of available actions to be performed after the automatic hardware detection Remarks The following enumeration values are available e 0 ACTION USER GUIDANCE Guided configuration e 1 ACTION AUTO CONFIGURATION Automatic creation of default configuration 2 ACTION MANUAL CONFIGURATION Manual configuration 51 24 enum MAP IMAGERY SOURCE Enumeration of supported sources of map imagery Remarks The following enumeration values are available 0x00010001 InternalCacheWithInte
36. ess the cloud drive string MappedDrive get set Returns or sets the drive letter that should be assigned to the cloud drive string Name get set Returns or sets the name of the cloud drive string Password get set Returns or sets the password string Url get set Returns or sets the URL of the cloud drive 6 1 1 Detailed Description Cloud drive interface 6 1 2 Property Documentation 6 1 2 1 bool Active get set Specifies whether the cloud drive will be connected IPEmotionSettings Interface Documentation TRON 6 1 2 2 string LoginName get set Returns or sets the login name needed to access the cloud drive 6 1 2 3 string MappedDrive get set Returns or sets the drive letter that should be assigned to the cloud drive 6 1 2 4 string get set Returns or sets the name of the cloud drive The name should be unique 6 1 2 5 string Password get set Returns or sets the password 6 1 2 6 string Url get set Returns or sets the URL of the cloud drive IPEmotion COM Reference IPETRONIK GmbH amp Co KG 24 60 IPEmotionSettings Interface Documentation RO N 6 2 ICloudDrives Interface Reference Cloud drive list interface Public Member Functions ICloudDrive AddCloudDrive string nameOfCloudDrive string url string loginName string password bool activate string driveLetter Adds a new cloud drive to the cloud drives list IEn
37. figurationPriority Priority get set Specifies the usage priority of the object string get Reference object type name 6 9 1 Detailed Description Reference object interface 6 9 2 Property Documentation 6 9 2 1 bool IsReferencePart get set Specifies whether the object will be used in the reference 6 9 2 2 ConfigurationPriority Priority get set Specifies the usage priority of the object 6 9 2 3 string TypeName get Reference object type name IPEmotion COM Reference IPETRONIK GmbH amp Co KG 36 60 IPEmotionSettings Interface Documentation RO N 6 10 IReferenceObjects Interface Reference Reference object list interface Public Member Functions IEnumerator GetEnumerator Enumerator for the reference object list Properties int Count get Count of reference objects in this list ReferenceObject Item int index get Returns the reference object with the given zero based index from this list 6 10 1 Detailed Description Reference object list interface 6 10 2 Member Function Documentation 6 10 2 1 IEnumerator GetEnumerator Enumerator for the reference object list Returns Interface of the reference object list enumerator 6 10 3 Property Documentation 6 10 3 1 int Count get Count of reference objects in this list 6 10 3 2 IReferenceObject Item int index get Returns the reference object with the given zero based index f
38. for the data plug in list Properties int Count get Count of data plug ins in this list e DataPlugln Item int index get Returns the data plug in with the given zero based index from this list 6 4 4 Detailed Description Data plug in list interface 6 4 2 Member Function Documentation 6 4 2 1 IEnumerator GetEnumerator Enumerator for the data plug in list Returns Interface of the data plug in list enumerator 6 4 2 2 IEnumerator GetEnumerator Enumerator for the data plug in list Returns Interface of the data plug in list enumerator 6 4 3 Property Documentation 6 4 3 1 int Count get Count of data plug ins in this list IPEmotion COM Reference IPETRONIK GmbH amp Co KG 29 60 IPEmotionSettings Interface Documentation 6 4 3 2 IDataPlugin Item get Returns the data plug in with the given zero based index from this list Parameters index Index of the data plug in in this list Returns Interface of the data plug in IPEmotion COM Reference IPETRONIK GmbH amp Co KG IP TRONIK 30 60 IPEmotionSettings Interface Documentation RO N 6 5 Interface Reference Plug in interface Public Member Functions object GetOptionValue string optionName Returns the value assigned to the named plug in option void SetOptionValue string optionName object value ToSet Sets the value of the named plug in option Properties bool A
39. g TypeName get Returns the plug in type name IPEmotion COM Reference IPETRONIK GmbH amp Co KG 32 60 IPEmotionSettings Interface Documentation RO N 6 6 IPluglnOption Interface Reference Plug in options interface Properties string Name get Name ofthe plug in option object Value get set Value of the plug in option 6 6 1 Detailed Description Plug in options interface 6 6 2 Property Documentation 6 6 2 1 string Name get Name of the plug in option 6 6 2 2 object Value get set Value of the plug in option IPEmotion COM Reference IPETRONIK GmbH amp Co KG 33 60 IPEmotionSettings Interface Documentation RO N 6 7 IPluglnOptions Interface Reference Plug in options list interface Public Member Functions IEnumerator GetEnumerator Enumerator for the plug in option list Properties int Count get Count of plug in options in this list e PlugInOption Item int index get Returns the plug in option with the given zero based index from this list 6 7 1 Detailed Description Plug in options list interface 6 7 2 Member Function Documentation 6 7 2 1 IEnumerator GetEnumerator Enumerator for the plug in option list Returns Interface of the plug in option list enumerator 6 7 3 Property Documentation 6 7 31 int Count get Count of plug in options in this list 6 7 3 2 IPlugInOption Item int index get Returns the p
40. g ins 6 11 3 10 IDataPluglns DatalmportPlugInList get Returns the list of available data import plug ins 6 11 3 11 bool DisplayExtendedTabs get set Returns or sets whether extended dialog tabs like the format tab of channels are displayed 6 11 3 12 bool EnableAdditionalWarnings get set Returns or sets whether additional warnings are displayed in popup windows when expert mode is active 6 11 3 13 bool EnablelmporterLogging get set Returns or sets whether warnings and errors appearing during import are written to a log file IPEmotion COM Reference IPETRONIK GmbH amp Co KG 46 60 IPEmotionSettings Interface Documentation RO N 6 11 3 14 bool EnableMapCache get set Specifies whether caching of map tiles is enabled Remarks Obsolete This configuration option is no longer available Please use property MaplmagerySource if applicable 6 11 3 15 bool EnableProtocolChannelConfiguration get set Returns or sets whether the scaling of channels imported from a description file can be edited 6 11 3 16 bool EnableProtocolConfiguration get set Returns or sets whether protocol nodes are visible in the hardware tree when the expert mode is active 6 11 3 17 bool EnableReferenceConfiguration get set Returns or sets whether the channel references can be configured in the plug in options when expert mode is active Remarks No longer supported 6 11 3 18 bool EnableVariableConfi
41. guration get set Returns or sets whether variable channels are available when the expert mode is active 6 11 3 19 bool ErrorFreeMeasurementChainAtlnit get set Returns or sets whether an error free configuration is required before any hardware initialization can be done 6 11 3 20 bool ExpertMode get set Returns or sets the expert mode 6 11 3 21 string ExportDefaultDirectory get set Specifies the default directory where description files should be exported to 6 11 3 22 int FontSize get set Returns or sets the font size used by the display elements Remarks The font size can be set to 7 S 9 M 11 L or 13 XL point IPEmotion COM Reference IPETRONIK GmbH amp Co KG 47 60 IPEmotionSettings Interface Documentation RO N 6 11 3 23 HardwareDetectionAction HardwareDetectionAction get set Returns or sets which kind of configuration action should be performed after a succesfull automatic hardware detection on IPEmotion start 6 11 3 24 bool HardwareDetectionOnStart get set Returns or sets whether IPEmotion starts a hardware detection on start 6 11 3 25 double HudTransparency get set Returns or sets the transparency used by the HUD dialogs Remarks The transparency can be set to values between 0 totaly opaque and 30 96 6 11 3 26 boollgnoreVerbalTable get set Returns or sets whether verbal tables are ignored during import of description files 6 11 3 27 string I
42. hamber of Commerce by one or more arbitrators appointed in accordance with the said Rules IPEmotion COM Reference IPETRONIK GmbH amp Co KG 4 60 Important general information TRON K 1 2 General information 1 2 1 About this manual This manual describes the COM interface provided by the software IPEmotionSettings 1 2 2 Version This manual has the version number 2014 0 released February 2014 All rights reserved 1 2 3 Support Headquarter IPETRONIK GmbH amp Co KG Im Rollfeld 28 76532 Baden Baden Germany Phone 49 7221 9922 0 Fax 49 7221 9922 100 info ipetronik com www ipetronik com Limited commercial partnership with its head office in Baden Baden registry court HRA No 201313 IPETRONIK Verwaltungs GmbH Baden Baden is an individually liable society registry court Mannheim HRB No 202089 CEOs Erich Rudolf Andreas Wocke Technical support and product information www ipetronik com e mail support ipetronik com IPEmotion COM Reference IPETRONIK GmbH amp Co KG 5 60 Important general information TRON K IPEmotion COM Reference IPETRONIK GmbH amp Co KG 6 60 Chapter 2 IPEmotionSettings This document describes the COM interfaces of the IPEmotionSettings program The IPEmotionSettings program is meant to be used to modify the IPEmotion options The program can only be used while no instance of IPEmotion is running Only one instance of this program can be run
43. ion loads the last used configuration on start 6 11 3 36 int MapCacheSize get set Specifies the maximum size of the cache for map tiles in MByte Remarks Obsolete This configuration option is no longer available 6 11 3 37 MAP IMAGERY SOURCE MaplmagerySource get set Specifies the data source from which to load map imagery 6 11 3 38 int MapTilesProxyTcpPortNumber get set Specifies the TCP port number used by the map imagery processing unit 6 11 3 39 int MaxPollingListCount get set Returns or sets the number of polling lists that should be created when importing CCP XCP signals Remarks Values between 0 and 4 are supported which means the support of polling lists can be disabled or up to 4 polling lists can be used The usage of multiple DAQ lists requires a plug in that supports this feature 6 11 3 40 bool MergeDataFilesOnImport get set Specifies whether data files are to be connected when loading a data set 6 11 3 41 double NoValueTimeout get set Returns or sets the NoValue timeout in seconds Remarks Only values from 0 up to 5 0 are allowed IPEmotion COM Reference IPETRONIK GmbH amp Co KG 49 60 IPEmotionSettings Interface Documentation RO N 6 11 3 42 int OnlineYtDiagramHistoryBufferDepth get set Specifies the online yt charts history buffer depth Remarks Allowed values are in the range from 1 to 50 6 11 3 43 int OnlineYtDiagramHistoryBufferResolution get
44. irectly beside the crosshair IPEmotion COM Reference IPETRONIK GmbH amp Co KG 51 60 IPEmotionSettings Interface Documentation TRON 6 11 3 60 bool UseHardwareDetectionAction get set Returns or sets if a specific configuration action should be performed after a succesfull automatic hardware detection on IPEmotion start 6 11 3 61 bool UseStandardDialogs get set Specifies whether the Windows standard file open save dialog is user or the IPEmotion specific variant IPEmotion COM Reference IPETRONIK GmbH amp Co KG 52 60 IPEmotionSettings Interface Documentation RO N 6 12 lUserAccount Interface Reference User account interface Properties bool Active get set Specifies whether the user can log in e bool CanConfigurate get set Specifies whether the user can change the configuration bool CanModifyStatus get set Specifies whether the user can modify the IPEmotion status string Password get set Returns or sets the user password UserLevel UserLevel get set Specifies the access level of the user string Username get Returns the name of the user 6 12 1 Detailed Description User account interface 6 12 2 Property Documentation 6 12 2 1 bool Active get set Specifies whether the user can log in 6 12 2 2 bool CanConfigurate get set Specifies whether the user can change the configuration 6 12 2 3 bool CanModifyStatus get set Specifi
45. ist Parameters nameOfUser Name of the new user userPassword Password of the new user accessLevel Access level of the new user enabbleConfig Specifies whether the new user may modify configurations enabbleStatusModification Specifies whether the new user may change the IPEmotion satus Returns Interface of the new user account IPEmotion COM Reference IPETRONIK GmbH amp Co KG 55 60 IPEmotionSettings Interface Documentation RO N 6 13 2 2 IEnumerator GetEnumerator for the user account list Returns Interface of the user account list enumerator 6 13 2 3 void RemoveUser string nameOfUser Removes a user from the user account list Parameters nameOfUser Name of the user 6 13 3 Property Documentation 6 13 3 1 int Count get Count of user accounts in this list 6 13 3 2 IUserAccount Item int index get Returns the user account with the given zero based index from this list Parameters index Index of the user account in this list Returns Interface of the user account IPEmotion COM Reference IPETRONIK GmbH amp Co KG 56 60 Index ActivatePlugln ISettingsHandler 42 ActivatePluglnVersion ISettingsHandler 42 Active ICloudDrive 23 IPlugin 32 IUserAccount 53 AddCloudDrive ICloudDrives 25 AddHotKey ISettingsHandler 42 AddUser IUserAccounts 55 AnalysisDiagramCurveQuality ISettingsHandler 45 AutoAdministration ISettingsHandler 45
46. ist interface interface IPlugIn Plug in interface interface IPlugInOption Plug in options interface interface IPluglInOptions Plug in options list interface interface IPluglns Plug in list interface interface IReferenceObject Reference object interface interface IReferenceObjects Reference object list interface interface ISettingsHandler IPEmotionSettings Namespace Documentation T RO N K IPEmotion settings handler interface interface lUserAccount User account interface interface lIUserAccounts User account list interface Enumerations enum CharacteristicSupport Enumeration of available characteristic support types enum ConfigurationPriority Enumeration of available usage priorities enum HardwareDetectionAction Enumeration of available actions to be performed after the automatic hardware detection enum MAP IMAGERY SOURCE Enumeration of supported sources of map imagery enum PhysicalDimensionTypes Enumeration of supported physical dimension types enum SelectedPlotHighlightType Enumeration of supported highlightning types used to highlight selected curves in yt charts enum SignalConfigurationMode Enumeration of available configuration modes enum TimeZoneDisplay Type Enumeration of supported time zones used to diaplay absolute times in the analysis enum UiCommand Enumeration of available shortcut commands enum UserL evel Enumeration of available acc
47. lug in option with the given zero based index from this list Parameters index Index of the plug in option in this list Returns Interface of the plug in option IPEmotion COM Reference IPETRONIK GmbH amp Co KG 34 60 IPEmotionSettings Interface Documentation RO N 6 8 IPluglns Interface Reference Plug in list interface Public Member Functions IEnumerator GetEnumerator Enumerator for the plug in list Properties int Count get Count of plug ins in this list e Plugin Item int index get Returns the plug in with the given zero based index from this list 6 8 1 Detailed Description Plug in list interface 6 8 2 Member Function Documentation 6 8 2 1 GetEnumerator Enumerator for the plug in list Returns Interface of the plug in list enumerator 6 8 3 Property Documentation 6 8 3 1 int Count get Count of plug ins in this list 6 8 3 2 IPlugIn Item int index get Returns the plug in with the given zero based index from this list Parameters index Index of the plug in in this list Returns Interface of the plug in IPEmotion COM Reference IPETRONIK GmbH amp Co KG 35 60 IPEmotionSettings Interface Documentation RO N 6 9 IReferenceObject Interface Reference Reference object interface Properties bool IsReferencePart get set Specifies whether the object will be used in the reference Con
48. mportDefaultDirectory get set Specifies the default directory where import description files can be found 6 11 3 28 bool IncludeExternalFilesInConfiguration get set Returns or sets whether external files are added to the configuration file 6 11 3 29 bool IncludeOptionsInConfiguration get set Returns or sets whether option settings that influence the configuration are saved in the configuration file 6 11 3 30 bool InitViewPagesAtFirstVisibility get set Specifies whether the online view pages are initialized during configuration loading or delayed until the page is made visible for the first time 6 11 3 31 bool IsUserAdministrationActive get Returns true in case the user administration is active 6 11 3 32 bool JobConfiguration get set Returns or sets whether diagnostic job sequences are displayed in the IPEmotion setup tree and diagnostic jobs in the grid 6 11 3 33 string LayoutDefaultDirectory get set Specifies the default directory for report layout files IPEmotion COM Reference IPETRONIK GmbH amp Co KG 48 60 IPEmotionSettings Interface Documentation RO N 6 11 3 34 double LimitMessageDisplayTime get set Returns or sets the display time of limit excceded messages in seconds Remarks Only positive values are allowed In case 0 is set the messages stay visible until closed by the user 6 11 3 35 bool LoadLastConfigurationOnStart get set Returns or sets whether IPEmot
49. ng or delayed until the page is made visible for the first time bool IsUserAdministrationActive get Returns true in case the user administration is active e bool JobConfiguration get set Returns or sets whether diagnostic job sequences are displayed in the IPEmotion setup tree and diagnostic jobs in the grid string LayoutDefaultDirectory get set Specifies the default directory for report layout files double LimitMessageDisplayTime get set Returns or sets the display time of limit excceded messages in seconds bool LoadLastConfigurationOnStart get set Returns or sets whether IPEmotion loads the last used configuration on start e int MapCacheSize get set Specifies the maximum size of the cache for map tiles in MByte IPEmotion COM Reference IPETRONIK GmbH amp Co KG 40 60 IPEmotionSettings Interface Documentation RO N MAP IMAGERY SOURCE MaplmagerySource get set Specifies the data source from which to load map imagery int MapTilesProxyTcpPortNumber get set Specifies the TCP port number used by the map imagery processing unit e int MaxPollingListCount get set Returns or sets the number of polling lists that should be created when importing CCP XCP signals bool MergeDataFilesOnlmport get set Specifies whether data files are to be connected when loading a data set double NoValueTimeout get set Returns or sets the NoValue timeout in seconds int OnlineY
50. r cause not to be displayed any copyright or trademark notices license agree ments or startup messages contained in the programs or documentation v Transmit or otherwise export outside of the Unites States any of the SOFTWARE or technology in violation of United States or other applicable laws or regulations 3 Ownership of Intellectual Property LICENSEE agrees and acknowledges that the SOFTWARE is being provided to it only for use in EQUIPMENT in the ordinary course of business and that LICENSEE agrees and acknowledges that IPETRONIK is the owner of all title and proprietary rights in the SOFTWARE including without limita tion any and all patents copyrights trademarks or any other intellectual property rights associated with it under the laws of the United States or any jurisdiction throughout the world No right title or interest in the SOFTWARE or any IPETRONIK patent copyright trademark or any other intellectual property right is transferred to LICENSEE or any other party through this Software License Agreement 4 Disclaimer of Warranties Liability Limitations a THE SOFTWARE IS PROVIDED TO YOU AS IS THERE ARE NO WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE AND COMPATIBILITY AND TITLE b LICENSEE ASSUMES ALL RISK AS TO THE SELECTION USE PERFORMANCE AND QUALITY OF THE SOFTWARE IN NO EVENT WILL IPETRONIK OR ANY OTHER PA
51. rnet Tiles are retrieved from the internal cache if contained within otherwise loaded from the internet Tiles loaded from the internet are stored in the cache e 0x00020001 LocalDatabaseWithInternet Tiles are retrieved from the specified local database if contained within otherwise loaded from the internet Tiles loaded from the internet are not stored 0x00020000 LocalDatabase Tiles are retrieved from the specified local database only Map re gions requiring imagery which is not contained in the database are not displayed 5 1 2 5 enum PhysicalDimensionTypes Enumeration of supported physical dimension types Remarks The following enumeration values are available 0 NONE Used for values without a physical dimension 1 Length COM Reference IPETRONIK GmbH amp Co KG 15 60 IPEmotionSettings Namespace Documentation 4 5 11 12 13 22 23 24 25 16 17 18 19 Mass Time Current Temperature MolarAmount LuminousIntensity Voltage Resistance Frequency Force Energy Power Pressure Speed Rpm MassFlowRate Angle Strain BaudeRate Percent ByteSpace Acceleration Torque VolumetricFlowRate SpecificEnthalpy 5 1 2 6 enum SelectedPlotHighlightType IP TRONIK Enumeration of supported highlightning types used to highlight selected curves in yt charts Remarks The following enumer
52. rom this list Parameters index Index of the reference object in this list Returns Interface of the reference object IPEmotion COM Reference IPETRONIK GmbH amp Co KG 37 60 IPEmotionSettings Interface Documentation RO N 6 11 ISettingsHandler Interface Reference IPEmotion settings handler interface Public Member Functions void ActivatePlug n string pluginName Activates a specific plug in void ActivatePlugInVersion string pluginName string pluginVersion Activates a specific plug in version void AddHotKey UiCommand commandld Keys key int parameter Adds a hot key to a command bool ChangeAdminPassword string oldAdminPassword string newAdminPassword Changes the password of the adminiatrator account void DeactivatePlugln string pluginName Deactivates a plug in void DisableUserAdministration string adminPassword Disables the user administration void EnableUserAdministration string newAdminPassword Enables the user administration and sets the administrator password void ExportEnvironment string fileName Creates a working environment file using the actual settings string GetPreferredUnit PhysicalDimensionTypes physicalDimension Returns the preferred unit for a given physical dimension IUserAccounts GetUserAccounts string adminPassword Returns the list of registered user accounts in the user administration void ImportEnvironment string file
53. s pluginName Name of the plug in to be deactivated 6 11 2 6 void DisableUserAdministration string adminPassword Disables the user administration Parameters adminPassword Password of the adminiatrator account Remarks The password must match the password of the administrator account otherwise no change will happen IPEmotion COM Reference IPETRONIK GmbH amp Co KG 43 60 IPEmotionSettings Interface Documentation RO N 6 11 2 7 void EnableUserAdministration string newAdminPassword Enables the user administration and sets the administrator password Parameters newAdminPassword Password to be set for the adminiatrator account Remarks It is recomended to assign a non empty password for the administrator account 6 11 2 8 void ExportEnvironment string fileName Creates a working environment file using the actual settings Parameters fileName Name of the working environment file to be saved x ief Remarks The actual settings are automatically saved before the environment file is created 6 11 2 9 string GetPreferredUnit PhysicalDimensionTypes physicalDimension Returns the preferred unit for a given physical dimension Parameters physicalDimension Typ of the physical dimension 6 11 2 10 IUserAccounts GetUserAccounts string adminPassword Returns the list of registered user accounts in the user administration Parameters adminPassword Password of the adminiatrator account
54. s from 0 up to 100 are allowed The value 100 means that all measured values are used to draw the curves A value of 0 specifies that only a minimum number of samples is used 6 11 3 2 bool AutoAdministration get set Returns or sets whether the autotomatic service administration is used 6 11 3 3 CharacteristicSupport CharacteristicSupport get set Returns or sets the way characteristics are handled during import IPEmotion COM Reference IPETRONIK GmbH amp Co KG 45 60 IPEmotionSettings Interface Documentation RO N 6 11 3 4 ICloudDrives CloudDrives get Returns the list of registered cloud drives 6 11 3 5 string ConfigDefaultDirectory get set Specifies the default directory for loading and saving configuration files 6 11 3 6 string Culture get set Returns or sets the localization of the IPEmotion Ul Remarks The localization is specified by a language tag that conforms to IETF RFC 3066 The language part is a two letter subtag according to ISO standard 639 and the country part is a two letter subtag according to the country code specified in ISO 3166 6 11 3 7 string CustomDataDefaultDirectory get set Specifies the default directory where user specific data is loaded from and stored to 6 11 3 8 string DatabaseDefaultDirectory get set Specifies the default directory for database files 6 11 3 9 IDataPlugins DataExportPlugInList get Returns the list of available data export plu
55. set Specifies the online yt charts history buffer resolution factor Remarks Allowed values are in the range from 1 to 10 6 11 3 44 bool PerformanceOptimization get set Specifies whether the performance of the display elements should be optimized at the expense of the design 6 11 3 45 IPluglns PluginList get Returns the list of available plug ins 6 11 3 46 string ProjectDataDefaultDirectory get set Specifies the default directory for loading and saving project data files 6 11 3 47 string RawDataDefaultDirectory get set Specifies the default directory where temporary measurement data files will be saved 6 11 3 48 string ScriptingDefaultDirectory get set Specifies the default directory where loads and stores cript files 6 11 3 49 SelectedPlotHighlightType SelectedPlotHighlightType get set Specifies the highlightning type of selected curves in yt charts 6 11 3 50 bool SharedTimeChannel get set Indicates whether cyclical time channels that have the same sampling rate and the same data set should be combined in the display and while they are exported 6 11 3 51 bool ShowToolTips get set Returns or sets whether tool tips are shown IPEmotion COM Reference IPETRONIK GmbH amp Co KG 50 60 IPEmotionSettings Interface Documentation RO N 6 11 3 52 SignalConfigurationMode SignaIConfigurationMode get set Returns or sets the configuration mode 6 1
56. tDiagramHistoryBufferDepth get set Specifies the online yt charts history buffer depth int OnlineYtDiagramHistoryBufferResolution get set Specifies the online yt charts history buffer resolution factor bool PerformanceOptimization get set Specifies whether the performance of the display elements should be optimized at the expense of the design Plugins PluginList get Returns the list of available plug ins string ProjectDataDefaultDirectory get set Specifies the default directory for loading and saving project data files string RawDataDefaultDirectory get set Specifies the default directory where temporary measurement data files will be saved string ScriptingDefaultDirectory get set Specifies the default directory where IPEmotion loads and stores cript files e SelectedPlotHighlightType SelectedPlotHighlightType get set Specifies the highlightning type of selected curves in yt charts bool SharedTimeChannel get set Indicates whether cyclical time channels that have the same sampling rate and the same data set should be combined in the display and while they are exported bool ShowToolTips get set Returns or sets whether tool tips are shown e SignalConfigurationMode SignalConfigurationMode get set Returns or sets the configuration mode string Skin get set Returns or sets the name of the skin to be used by the IPEmotion Ul int SplitFileSize get set Returns or
57. umerator GetEnumerator Enumerator for the cloud drives list void RemoveCloudDrive ICloudDrive cloudDriveToRemove Removes a cloud drive from the cloud drives list Properties int Count get Count of cloud drives in this list ICloudDrive Item int index get Returns the cloud drive with the given zero based index from this list 6 2 1 Detailed Description Cloud drive list interface 6 2 2 Member Function Documentation 6 2 2 1 ICloudDrive AddCloudDrive string nameOfCloudDrive string url string loginName string password bool activate string driveLetter Adds a new cloud drive to the cloud drives list Parameters nameOfCloudDrive Name of the new cloud drive url URL of the new cloud drive loginName Log in name of the new cloud drive password Password of the new cloud drive activate Connect cloud drive driveLetter Drive letter that should be assigned to the cloud drive The name the URL and the log in name are required parameters Using an empty password is not recommended In case the drive letter is not specified the operating system will choose a drive letter when connecting the cloud drive Returns Interface of the new cloud drive IPEmotion COM Reference IPETRONIK GmbH amp Co KG 25 60 IPEmotionSettings Interface Documentation RO N 6 2 2 2 IEnumerator GetEnumerator Enumerator for the cloud drives list Returns Interface of the cloud drives list enumer
58. urns or sets whether an error free configuration is required before any hardware initialization can be done bool ExpertMode get set Returns or sets the expert mode string ExportDefaultDirectory get set Specifies the default directory where description files should be exported to e int FontSize get set Returns or sets the font size used by the display elements HardwareDetectionAction HardwareDetectionAction get set Returns or sets which kind of configuration action should be performed after a succesfull automatic hardware detection on IPEmotion start bool HardwareDetectionOnStart get set Returns or sets whether IPEmotion starts a hardware detection on start e double HudTransparency get set Returns or sets the transparency used by the HUD dialogs bool lgnoreVerbalTable get set Returns or sets whether verbal tables are ignored during import of description files string ImportDefaultDirectory get set Specifies the default directory where import description files can be found e bool IncludeExternalFilesInConfiguration get set Returns or sets whether external files are added to the configuration file bool IncludeOptionsInConfiguration get set Returns or sets whether option settings that influence the configuration are saved in the configuration file bool InitViewPagesAtFirstVisibility get set Specifies whether the online view pages are initialized during configuration loadi
59. with a MODIFICA TION or LICENSEE S unauthorized use of the Licensed Software or Documentation 8 Merger Clause a LICENSEE agrees that this Software License Agreement is the complete and exclusive agreement between LICENSEE and IPETRONIK governing the SOFTWARE This Software License Agreement supersedes and merges all prior agreements with IPETRONIK concerning the SOFTWARE and can only be modified by a subsequent written agreement signed by IPETRONIK To the extent that there is any conflict between this Software License Agreement and any IPETRONIK purchase order or other written agreement for the purchase of IPETRONIK parts or products the terms of the purchase order or written agreement control 9 General a If any provision or portion of a provision of this Software License Agreement is determined to be invalid or unenforceable it shall be deemed omitted and the remaining provisions of this Software License Agreement shall remain in full force and effect to the fullest extent permitted by law b LICENSEE may not assign or transfer all or part of this Software License Agreement to any third party without the express written approval of IPETRONIK c This Software License Agreement will be governed by the laws of the State of Michigan without regard to its conflict of laws provisions d All disputes arising out of or in connection with the present contract shall be finally settled under the Rules of Arbitration of the International C
Download Pdf Manuals
Related Search