nativeKONTROL pKC
Contents
1. From MT Player 1 For the control surface s output you ll select To MT Player 1 NOTE If you re using the Thru version you ll want to turn off any settings related to your 2nd controller in your software MT PLAYER SETTINGS The first time you use your padKONTROL in MT Player you will need to setup the padKONTROL s ports You are prompted to do this as soon as a Preset is selected in MT Player However if you bypass those prompts you can access the settings by right clicking on MT Player and selecting MIDI Settings 1 From the Port Name menu select IN padKONTROL 1 PORT A 2 From the MIDI In port menu select your padKONTROL s PORT A and click OK Go back into MIDI Settings From the Port Name menu select OUT padKONTROL 1 CTRL 5 From the MIDI Out port menu select your padKONTROL s CTRL PORT and click OK 6 Click the Restart button a i This Preset also includes an Input for a 2nd MIDI controller which is used for Learning To setup the 2nd controller 1 From the Port Name menu select IN Keyboard ForLearn 2 From the MIDI In port menu select your 2nd controller and click OK You can learn more about MT Player in the pKC General Manual LRN LEARN CMPNT SLCT PARAMS NAVIGATION ca OCT OCT sus CYCLE 1 8 caine hd UNDO REDO CLIP REC PLAY STOP REC SHIFT PREV M NEXTM CLIP TRK REW FFW LOOP ii LEARN 1 8 one CHORD 1 8 PEDAL SUSTA2. Preset pKC LRN v1 0 0 NOTE There are 2 versions of this Preset pKC LRN is the default version pKC LRN Thru is the same as the default version except that it passes Thru MIDI from a 2nd controller Please try to use pKC LRN first If you get an error when trying to select your 2nd controller in Live or in MT Player then use the Thru version IMPORTANT NOTE If you are new to using pKComponents and or MT Player or if you need Support please refer to the pKC General Manual SETTINGS SOFTWARE SETTINGS MT PLAYER SETTINGS LRN LEARN COMPONENT OVERVIEW PAD PARAMETERS PADS NAVIGATION TRANSPORT X Y PAD MISC KNOBS OTHER APPS SUPPORT SETTINGS SOFTWARE SETTINGS In order to use this Component s main controls with your software you need to set the software up to receive MIDI from From MT Player 3 For example with Ableton Live you d go to Option Preferences MIDI Sync and turn the Track switch on for From MT Player 3 With Reason you d go to Edit Preferences Control Surfaces and Keyboards You d click the Add button select lt Other gt from the Manufacturer list and select MIDI Keyboard w Controls from the Model list For the In Port you d select From MT Player 3 In order to use this Component s Transport controls with your software you need to set up the Mackie Control as a control surface in your software For the control surface s input you ll select
3. IN COMPONENT OVERVIEW This Component allows you to Learn Chords to the Pads by playing them from a 2nd controller PAD PARAMETERS SEMI This will transpose your Learned Chords and Notes up 1 Semitone SEMI This will transpose your Learned Chords and Notes down 1 Semitone FIXED VELO Turns off the velocity response of the Pads PADS CHORD 1 8 These Pads will trigger the Learned Chords You can Learn Chords to these Pads by using Learn 1 8 While a Pad is Learning it will flash You can then play the Chord from your 2nd controller The Display will indicate how many Notes 1 5 have been received If you play more than 5 Notes the previous 5 Notes will be deleted When you re done Learning press the Pad to save CYCLE 1 8 These Pads will Cycle through the Notes in Chords 1 8 For example Cycle 1 will Cycle through the Notes in Chord 1 It will continuously Cycle through the Notes in Chord 1 until you press Cycle 2 8 which will reset Cycle 1 All of the Cycles reset each other NAVIGATION OCT Transpose your Learned Chords and Notes down up 1 Octave SUS Sustain the currently held Note s TRANSPORT PLAY STOP Play Stop playback UNDO REDO Undo Redo REC Toggle Arrangement Record CLIP REC Use this to record perfectly cut Clips Audio or MIDI at the current Global Quantization value For example if Global Quantization is set to 2 bars this will record
4. a perfect 2 bar clip This function is intended for the creation of new Clips so Overdub should be turned off when using it REW FFW Rewind Fast Forward PREV M NEXT M Jump to Previous Next Marker LOOP Toggle Arrangement Loop CLIP TRK Toggle between Clip and Track Views NOTE 1 If a Pedal is connected it will sustain the currently held Note s NOTE 2 If you re using an application other than Ableton Live please see the Other Apps section X Y PAD The X Y Pad is used to control Pitch Bend and the Mod Wheel MISC X Y HOLD Hold the current value of X Y PB ON OFF This will turn Pitch Bend on off for the X axis MOD ON OFF This will turn Mod Wheel on off for the Y axis KNOBS The Knobs are used to control 8 instrument level parameters KNOB 1 ASGN Press this Button and the Display will show the parameter that is assigned to Knob 1 Hold this Button down and use the Encoder to select which parameter is assigned to Knob 1 KNOB 2 ASGN Same as Knob 1 Asgn KNOB PARAMETERS Aft Channel Aftertouch PB Pitch Bend Mod Mod wheel Vol Volume CC7 Cut Filter cutoff frequency CC74 Rez Filter resonance CC71 Att Amp attack CC73 Rel Amp release CC72 OTHER APPS When using this Component with applications other than Ableton Live the Transport section will work slightly differently Play Stop Rec FFW and REW should all work as described in the Tr
5. ansport section The other functions may work but may perform different functions than what is described in the Transport section The Clip Rec function will definitely not work that is a Live specific function SUPPORT Email support nativekontrol com Forum Beatwise Network Videos Stray s YouTube Channel Copyright 2013 nativeXKONTROL All rights reserved This document as well as the software described in it is provided under license and may be used or copied only in accordance with the terms of this license The content of this document is furnished for informational use only is subject to change without notice and should not be construed as a commitment by nativeKONTROL Every effort has been made to ensure that the information in this document is accurate nativeXKONTROL assumes no responsibility or liability for any errors or inaccuracies that may appear in this document All product and company names mentioned in this document as well as the software it describes are trademarks or registered trademarks of their respective owners This software is solely endorsed and supported by nativeKONTROL
Download Pdf Manuals
Related Search