ANT-4000E User Manual_Ver2.0 - ANT
Contents
1. ID amp password When the server requires authentication ID and Password of an E mail account need to be entered Destination address Enter Destination address More than one address can be entered by delimiting comma or semi colon Destination address can take up to 63 characters Video Clip Attaching A video clip stored at the moment of the event can be attached as an AVI or JPEG file format If using dual Encoding Primary video or Secondary video H 264 only can be selected Number of Frame Enter frame number of JPEG Capture from 1 to 10 O FTP Upload Specify the settings to upload event information when FTP is selected as an event action Server Address Enter an address of an FTP server to receive video files Port Specify a port for FTP operation Port 21 is the default port in FTP operation If a different port is configured in the FTP server this port needs to be changed accordingly ID amp password Enter ID and Password for accessing the FTP server Upload video Primary video and Secondary video H 264 only JPEG can be selected as an upload method Continuous upload Continuous upload on allows the video image to be transmitted regularly regardless of occurrence of events Number of Frame Enter frame number of JPEG Capture from 1 to 10 Upload duration Specify recording duration of a video clip to be transmitted Upload interval Specify transmission interval Recording dura2. Two IP modes are supported Depending on the selected mode further configuration items come as follows IP Mode Selection Description Local IP Fixed IP address Fixed IP Local Gateway Gateway IP address Local Subnet Subnet mask 31 DHCP NIA Dynamic DNS isa method protocol or network service that provides the capability Tor a networked device such as a router or computer system using the Internet Protocol Suite to notify a domain name server to change in real time ad hoc the active DNS configuration of its configured hostnames addresses or other information stored in DNS A DNS Get DNS server address automatically when IP mode is DHCP Use the following DNS server addresses Enter the DNS server IP address Primary DNS server Secondary DNS server Q Port 6 Base Port Network base port is used for communication between systems In order for the servers and remote systems to be connected together the port number must be set identically sang Ka ba e HT Syst een Video Maho Network Sena vent Preset Hnr md Uer HT e RT En j4 RT int s to control stre O Authenti 6 RT If F correct user ID 32 and password when any RTSP client is connected HTTP API Authentication When HTTP API authentication set to ON HTTP Authentication is requested for all clients which use HTTP API LU RTP Session RTP Real Time Transport Protocol is an Internet protocol use
3. 57 Relay Type Contact Rating 1A 30VDC Switching Power Max 30W 62 5VA Switching Voltage Max 60VDC Alarm Signal Output Type NO NC Contact Signals Connection to External Device 2 Appendix B Serial Port O RS 232 Port Port Type 3 PIN 58 Pin Arrangement Pin Description Pin NO Pin Name Description TK RS232 TX Transmit RX RS232 RX Receive GND Ground O RS 422 485 Port Port Type 4 PIN Pin Diagram Pin Description Pin No Pin Name Description RX 38422 RX RX RS422 RX TX RS422 TX or RS485 TRX selectable by SAW Setup 4 TX RS422 TX or RS485 TRX selectable by S W Setup 59
4. Brackets fitted 1080P60 VIDEO ENCODER 123 45 67 8 9 10 No Parts Function 1 HDMI 1 HDMI input number 1 2 HDMI 2 HDMI input number 2 3 CVBS Video Composite Video Input RCA 4 AudioL Audio input left 5 Audio R Audio input Right 6 IR Out Not used 7 Audio Jack Stereo audio input jack 8 PC IN MGA input for PC interface 9 LAN 10 100 LAN RJ45 interface 10 12V DC 12 Volt DC input Rear View 123 45 67 8 9 10 No Part Function Serial Two way serial connector 2 Rx Serial Data Rx output 3 Tx Serial Data Tx input 4 3 3V 9 3 volts DC out 5 Ground Ground 6 LED1 Power indicator LED1 On 12v Power On 7 LED2 System booting blinking Booted On 8 LED3 Connected to Client On Decoder Blink IE 9 LED4 Video streaming On Video streaming 10 LED5 selected video port has a valid input signal 11 Reset switch System reset to factory default IP address 11 The ANT 4000E is a high quality 1080P60 maximum video and audio encoder with virtual serial connections ANT 4000E compresses Video and Audio using H264 standards and streams this compressed signal over an IP network via Ethernet Using an ANT 4000D decoder unit will allow the IP network stream to be decoded and converted back to Video plus Audio Alternatively a Software decoder such as VLC player may be used to decode the IP network stream generated by the ANT 4000E O Quick Start
5. Edt Opbore fle caching 170 Poy sL Cara s rasa misan 25 Resolution Select video compression resolution Compression resolutions are different depending on input formats The scaling option is used when compression resolution is different from input compression Without the scaling option the input video image will be cut according to compression resolution On the other hand if scaling is selected the input video size will be adjusted to the compression resolution Frame rate Determine the maximum number of frames per second for the video images to be compressed The frame rate of actually transmitted video can be affected by a network bandwidth limitation Preference Preference for video compression and transmission With Bit rate selected the video compression will be affected by the Bit rate value entered With Quality selected the video NNMRraccian will ha affected hu tha miialih nf imana enlantad Tharafara Dit rata nd Quality BR will try Output Format PAL 720x576 v bit rate will NTSC 720x480 PAL 720x576 720p60 1280x720 1080160 192041080 720p50 1280x720 1080150 192041080 Quality Select Video quality 8 levels of quality are available Quality mode VBR encoding adjusts the bit rate according to the image complexity using higher bandwidth for increased activity in the video and lower bandwidth for decreased activity It is preferred when the activity changes
6. The recovery is ery is in progress TET 9 U er UO User List User ied User configuration is allowe p T ich user can have one of four privileges 48 Setup ra deo heap bass VT 1 a I er eed vates ne Fu vat video Privilege Allowed Operations Remarks Admin All operations User id admin Manager All operations except for user configuration User Live viewing and PTZ control Guest Live viewing only Add User The Page for adding a user appears on pressing the Add button User ID and password need to be entered and privilege level needs to be selected User ID and password consists of alphanumeric string of max 15 characters Delete User A user is deleted by pressing Delete button Change Password Pressing Modify Password button after selecting a user shows a page for changing password 49 I ALAA Pret e F shows a page for changing the L min user O Login e For it F ation Basic and Digest Access en authentication is not required e privilege level after login in this Jin Skipp e fn Decoder Configuration Decoder Configuration 50 Decoder Configuration is slightly different from Encoder Configuration Different configurations from the encoder will be explained in this Decoder Configuration section 1 System Configuration By setting System Mode to Decoder in System configuration the system will reboot and start to work as a Decoder
7. 640x480 see table for more Wide Range of Video Transmission Rates 100kbps 12Mbps Various Transmission Modes frame GOP mode Slice Mode frame in P frames HDCP compliant v1 1 O Audio 2x HDMI audio supported Compressed or uncompressed Stereo Audio one way 44 1kHz 48kHz 16 bit ADC RCA stereo jacks and mini stereo headphone jacks O Network Static IP amp Dynamic IP DHCP Support 10 100 ethernet One to One Connection amp One to Multiple Connection Multi Casting and Simulcast modes Various Protocols supported TCP IP UDP Multicast DHCP HTTP RTSP RTSP One to one proprietary low latency plus MPEG TS Video only PLC modem connection O Serial Data Two serial ports RX and TX bi directional data 3 3v TTL serial data external level shift for RS232 required Data pass through mode Serial data communication between Encoder Decoder e Virtual serial cable between encoder and decoder Bi Directional O USB Engineering applications only O User Interface Internet Explorer for system setup Firmware upgrade via PC command interface simple OSD system status if required O Operating conditions Oto 40 ambient operating temp O Reliability Reliable embedded system System recovery utilizing dual watch dog functions System reset switch uma sawa ANT 4000E User Manual CD e Screws fitted Software CD Power adapter and Cable
8. Deteste det angi c G E Com bene k Hes Sade Itang x ds Casa ms A a Cas praises Information on Video Audio Streaming if Labag Vw de connected DOP live Pas Coe dra fimo ste Dpr forma Po In systems where a large OFO Seems GOP is used it may be necessary to force an frame PTUP Carver to be generated to assist the Assis Tee m decoder in locking on to the Aadi Draga decoder stream Press here to force frame Ng Pe c K wre Z n rrr 17 Src Z Tti wt Pees erae Pass MA sorasa pte p Ta Puri 1a Gta tana pe V teen Mav amp rue ists mro 8 A Kek ise c ud Im tet vtt tue soos Turn ON OFF Video Streaming Select Method of Encapsulation RTP or MPEG TS ANT 4000E has 2 modes of Video encapsulation WB RTP mode is used when the RTSP server is enabled and the ANT 4000E streams to an RTSP software or hardware decoder or when ANT 4000E is used in low latency P2P mode with an ANT 4000D decoder Note The ANT 4000D may also decode RTSP mode but ultra low latency is not supported P2P mode is default if the RTSP server is turned OFF B MPEG TS mode is used when the ANT 4000E is streaming via UDP to a set top box or soft decoder capable of decoding MPEG Transport Stream H264 only Note Audio is currently not supported in this mode 18 ANT 4000E supports two modes of sending the frame and P frames sent separately This is referred to as
9. E QU Remote Channel Y The channel can b vez a RN m ple video channels NOOR i x f NYA 3 E uri 1 SOR 4 m O Use Streaming Server Decoder system has settings to connect to the Encoder or IP Camera via the Streaming 54 Server To connect to Encoder or IP Camera via Streaming Server Use Streaming Server should be set to On and information about the Streaming Server SS needs to be configured appropriately SS IP address IP address of Streaming server SS port Enter Port number that is set when registering Streaming server SS ID Enter Streaming Server ID SS password Enter Streaming Server Password ALARM NO TEE ALARM 2 NO TFE 4 Display Configuratic 1 X Y 55 Q Disconnection Decoder system s output mo RS 422 485 TERMINALS be configured Freeze Video image of n there is a disconnection Black Screen Black Scr a disconnection A LED Select from Video Audio aru oss Ww oo muwuwu vy Data LED When you have selected data Video or Audio or Serial communication between the encoder and the decoder the Data LED will indicate the status Appendix i 1 Appendix A Sensor and Alarm Port 56 LJ Sensor Port Terminal Type Voltage Rating 150VAC Current Rating 2A Color Red Sensor Signal Input Type NO Contact Signals Connection to External Device D Alarm Port Terminal Type Voltage Rating 150VAC Current Rating 2A
10. The multicast IP address selection range is between 224 0 1 0 and 238 255 255 255 The selection can be used only when media protocol is set to Multicast The Multicast menu is used for the Multicast connection request from a decoder or VMS NVR software to transmit Multicast stream to the decoder or VMS NVR software The multicast address must be the same for the system to be connected using the multicast protocol Select the DDNS Dynamic DNS server to use One of two servers can be selected True DNS TrueDNS service is used in this mode Systems can be registered on the website for TrueDNS service http ns1 truecam net System will get a domain name of xxx truecam net style Please refer to user guide document for True DNS service DynDNS DynDNS service is used in this mode Refer www dyndns org for details ID Password and Domain name are needed when DynDNS is set Check IP Disable If Check IP Disable is selected IP Server will skip checking its own IP In Fixed IP mode the set IP will be registered on the DDNS server In DHCP mode the Allotted IP will be registered on DDNS server A Br t t sit LI Bitrate Cor e Wher r video server and some N 1 fully it is possible to sel F clients with limited E 4 S ed O Address In The f 4 e IPAc e server s IP mode is set 34 Domain Name In case the server is registered with a DDNS server the registered domain name is displayed MAC Address Display the M
11. a __ a Network m eniently toca fade Ped F Leal m I TO UN ies Gem E Lact karan M IE A 1 DMS Mere EF e ate atm ey LU Boss Mosi adi eil Pone NG Yana GRO fe DA oro WR OTT Pat tere aaa wor PTT Moe 198 ow iero t O amp nsitivity tH furem 00 O da UTI Besant Una OT Genie co a Desa 6666 r Each hes nation is ew tipu tale mom ectively DAF Lee pom Yn MER luas omaes KENA MAP lw De meme w XI aces Vaca Dargis Output Format Output Format menu appears only when Enable Preview is on DORS CONE Seno Sre rT a 28 D Des P Du aiam m rh se lapan Select the output format for the monitor preview according to the video Input and monitor specification The following output format is available according to the video input format Output format Available Input format NTSC 720x480 Composite NTSC SD SDI NTSC HDMI PAL 720x576 Composite PAL SD SDI PAL HDMI 7200060 1280x720 Composite HD SDI HDMI 1080160 1920x1080 Composite HD SDI HDMI 720p50 1280x720 Composite HD SDI HDMI 1080150 1920x1080 Composite HD SDI HDMI 3 Audio Configuration QO Algorithm Select audio algorithm between G 711 and AAC Domain Name System DNS is a database system that translates a computer s fully qualified domain name into an IP address Networked computers use IP addresses to locate 9 land connect to each other but IP addresses can be diffi
12. formatting Progressing Disk formatting Writing inode tables 63 619 Disk formatting Creating journal Disk formatting Writing Superblocks Disk format done Disk removed Disk is detached during operation or there is damage on or in abnormal state the file system If it happens while disk is connected it is recommended to format the disk LU General Sel L dary video e Ov isk is full If Overwrite free space in the disk st on disk maintaining e a small file size is set ased If recording time ious file size is smaller O Event Typ e Disconnect In case of Selected event type is igured and each event e e O Schedule Table Actual recording mode is determined by Schedule Table where recording mode configured by day 43 of a week and time Each of recording mode configures the recording operation as follows Record off No recording Continuous Records continuously Disconnect Data is recorded when the system loses the connection to its client Decoder VMS NVR etc When one of its multiple clients system is disconnected this doesn t happen Event Type Records when an event configured in Event Type setting happens Checking status of recording Recording status can be shown on the main view page Live View Ya Sarri iv Recording status can be also shown in True Manager When data is being recorded Record column displays th
13. 2 Video Configuration 51 Q Output F d T 4000E can C b PAL 720 x 576 720p60 1280x720 1080p60 1920 x 1080 720p50 1280 x 720 1080150 1920 x 1080 eso UO Buffering You can store a maximum 30 decoded frames temporarily by using buffering before displaying the frames Displaying stored frames is smoother than displaying in real time However displaying stored frames causes delay because of process of buffering Setup Love View Syakur Video Ate Networ Serai L ron enet naga an User Display oo 52 Network page of Decoder has a section for specifying the remote system to connect to O Remote Type Normal Connection for ANTRICA Encoder and decoder 53 RTSP RTP Decoder system can make connection though RTSP protocol and get the stream via RTP It is also possible to make connection with other vendors H 264 IP camera supporting standard RTSP RTP and standard H 264 algorithm To make an RTSP connection set Remote Type to RTSP enter the RTSP URL of remote system to Remote Address and RTSP access port number to Remote Port Currently it supports only video Q Media Protocol Select protocol used for transmission of audio and video data between remote system and decoder The decoder system or VMS can choose media protocols among TCP UDP and Multicast O Remote Address SENSOR f 934 Address of the rem L Reena GS Li Port L UE 4 wiwi L 2 bed oq Port of the remote a u nd
14. AC address of the server In case the server is registered with a DDNS server the MAC address is used for DDNS registration Connecting Client IP Addresses that are currently connected to system are listed 1 Indicates Primary streaming and 0 indicates Secondary streaming 5 Serial Port Configuration 35 O Serial Port Type and Configuration O PTZ Serial Port type There are two serial ports RS 232 RS 422 485 in ANT 4000E Select RS 422 or RS 485 in RS 422 485 port Serial Port Configuration The serial ports can be configured as follows Each of the serial ports configurations must be same as the connecting device Mode Selection Bitrate 2400 4800 9600 19200 38400 57600 115200 bps Data Bits 5 6 7 8 bits Parity NONE EVEN ODD bit Stop Bit 1 2 bit PTZ Type Select the type of PTZ camera or receiver PTZ ID Since it is possible to control multiple PTZ cameras or receivers over a single control line each camera or receiver will be assigned with a unique ID Enter PTZ ID of a camera or receiver for control The ID value range can be between 0 and 255 PTZ Port Select the serial port used for the PTZ camera control Direct Keyboard Control Keyboard controller can be connected to ANT 4000E directly to control pan tilt zoom and focus O Sensor Type There are two sensor input ports on ANT 4000E Each of the sensor ports can be configured to the following Function Operation
15. ANTRICR ANT 4000E H 264 1080P60 HD VIDEO ENCODER User Manual ver 2 0 Safety Precautions We appreciate you purchasing the ANT 4000E Before installing the product please read the following carefully Make sure you turn off the power before installing the ANT 4000E Do not install under the direct sunlight or in dusty areas Make sure you use the product within the temperature and humidity specified in the specification Do not operate the product in presence of vibration or strong magnetic fields Do not put electrically conducting materials in the ventilation hole Do not open the top cover of the product It may cause a failure or electric shock from the components To prevent the unit from overheating make sure you keep the ventilation holes at the top least 10cm from any other object Also allow air underneath the unit and do not obstruct vent holes Make sure the mains voltage is correct 220V 110V before connecting the power adapter supplied in the box 12V DC output Do not obstruct ventilation holes above and below the server box Rubber feet are provided to allow air flow below the server case in addition to outlet holes at the top of the case Introduction 1 About this Manual This User Manual provides information on operating and managing the ANT 4000E in a number of video systems The Manual includes instructions for installation operation and configuration of the ANT 4000E
16. GOP mode Group Of Pictures An frame or reference frame is generated followed by a number of P frames Predictive determined by the GOP SIZE setting e g GOP 60 is 1x frame followed by 60 P frames RandIntraCoded and ContintraCoded are similar methods of Slice encoding where the frame data is broken into pieces and sent together with the P frames A traditional frame is generated when a new client joins in or at the start of a transmission Contiguous Intra Coded ContlntraCoded is where the top left macroblock of an frame is sent with the first P frame The next Macroblock of the frame is sent with second P frame and so on Last macroblock is bottom right Random Intra Coded RandintraCoded is where macroblocks of the frame are randomly selected and sent embedded in P frames Intra Count defines the period over which frames are dispersed over P frames simply number of P frames to each frame Tee 04 be LETT Fato Dm Mum Coding Method selection obi a M tama i ae 6 r Ca a Pw mu lt rtm Lr C EVIL 7 wee WAN woo we a Intra Coding P frame count I frame 19 eVideo maximum bitrate framerate and On Screen Display can be set using these settings Very low bitrates for certain fast action video sequences or higher resolutions may cause blocking artifacts eRTSP streaming can be turned ON or OFF when OFF P2P mode is enabl
17. NT 4000E has a two way serial connection capability via a Virtual Cable function This 12 allows two way serial data to be sent received if the ANT 4000E is paired up with an ANT 4000D decoder unit 3 3V data may be sent bi directionally for control and command applications Serial data is sent as is subject to the serial port configurations See System setup Serial Ports Serial Data Tx E Serail Data Rx BH 3 3VDC WB Earth BL 6 Installation Powering Up amp LED Status Connect the 12V power converter to 110 240 V AC supply with the power lead provided Connect the 12V connector into the front panel of the ANT 4000E marked 12V DC Input 1 Observe ALL LEDs are illuminated and flashing momentarily this is to check all LEDs are working Reset e LED1 LED2 LED3 LED4 LED5 2 LED1 This indicates if 12V DC power is connected ON Power On OFF Power OFF Flashing test mode on power up 3 LED2 Booting Status of the onboard CPU Flashing Booting On Booted LED3 4 5 will flash 4 LED3 Client Connected Flashing No Client connected decoder On Client decoder Connected 5 LED4 Video Stream Data On Video data is streaming Flashing Streaming is Off 6 LED5 Video Input Connected On Video is connected to the selected input and identified as valid flashing No Video If the Encoder is working correctly in a typical system and connected to decoder and is streaming video then ALL LEDs will be ON 13 Web B
18. OFF Not used The port is normally open and activated when NO Normally Open closed NC Normally Closed opened The port is normally closed and activated when The function of the sensor port is set based on the type of the sensor connected 36 O Sensor Schedule Each sensor port can be enabled or disabled by a day of week and hour unit Sensor is disabled with a grey colored block 6 Event Configuration be ua Sanna fees Audio Network Serial Event Preset Record User Move PTZ Camera to the desirable view e B Um Q Press Set Button 37 O Local amp Remote Event Configuration The event configuration configures the actions for each event type Local section configures The following table lists the possible actions for events Q Alarm E mail the actions for events from local self system and the configuration activates local devices Remote sections configure the actions for events from remote peer system Action Description Raan Video Audio Outputs a beep sound using the buzzer in the e 100M bytes Network Lotep Serial Event Preset Record User for a single t for a single igle event ted Multiple inuous it will t action deration If a 38 different port is configured in the SMTP server this port needs to be changed accordingly Sender Address Enter an account registered in the SMTP server
19. Power up and streaming video The ANT 4000E comes with a 12 volt power converter 220 240 110V AC to 12 VDC plus a kettle lead for connection to the mains supply Plug the Kettle lead into the 12 volt supply and the other end of the kettle lead into the local mains AC supply Remove the ANT 4000E from its packaging and connect the 12Volt DC plug into the 12 socket of the ANT 4000E 5x LEDs will illuminate then gradually change state as the unit boots into its standby ready condition See LED description for exact meaning of LEDs Connect a suitable video source via one of the external Video and Audio inputs provided on the ANT 4000E Video resolution can be from PAL NTSC up to 1920 x1080 at 60 Hz or frames second A full list of supported video formats is described later in this manual HDMI CVBS VGA and Component using a Component to VGA dongle DVI D may be connected using a DVI D to HDMI dongle If you are using an ANT 4000D decoder unit connect this in a similar way as described above except Video and Audio connections will be Outputs instead of inputs ANT 4000E ANT4000D are shipped with the following defaults Encoder will communicate stream to the Decoder via LAN HDMI Port 1 upper most input on ANT 4000E is input and HDMI output on ANT 4000D IP addresses are 192 168 0 151 E and 192 168 0 152 D Connection via LAN will allow video from the ANT 4000E to be streamed to the ANT 4000D without any changes being made
20. as well as troubleshooting The ANT 4000E will be used as a generic part number and where options are mentioned this will be referred to as the ANT 4000EXX where XX is used to identify the options part number ANT 4000E is a Full HD 1920 x1080 at 60 frames second encoder designed to be used for various streaming applications where high quality video or PC output needs to be sent over an IP network at low data rates Video resolutions from PAL and NTSC up to 1080P60 are supported as well as stereo audio In combination with the ANT 40000D Decoder unit the ANT 4000E can additionally stream video at extremely low latencies delay typically 30mS The ANT 4000E provides a number of different video and audio interfaces together with a general purpose virtual 2 way serial cable interface Network transmission is via a 10 100 ethernet port Power is supplied by the 240 110V AC to12Volt DC converter supplied LJ Video State of the art Compression Algorithm H 264 Baseline level 4 2 24 bit RGB YUV 4 2 2 Low latency encode decode typ 30mS when used with ANT 4000D Single stream Stereo Audio Video and PC interfaces supported YCbCr amp RGB HDMI v1 3 DVI D VGA Composite Video and Component video supported YPbPr Component plus CVBS composite video Compression and Decompression with multiple Resolution options 1920x18080i60 P60 1280x720P60 720x480i60 P60 WSXGA 1680 x1050 SXGA 1280x1024 WXGA 1280x800 XGA 1024x768 SVGA 800x600 VGA
21. ased System Setup IP Address of Encoder Fixed Pad oto ayir T adhang sheer Gateway of Network Creer t Bc c o M tors nda Poote os 7 Ka Tm Multicast IP address IP Adress of Decoder Submit changes changes will be saved when this buttion pressed However if system is rebooted changes will be lost unless also saved in Save Changes menu on left menu bar Click to cause LEDS to Flash To identify which Encoder is being setup Refresh this web page Streaming Mode PZP v sroup IP multicast Multicast Select Peer 2 Peer mode or multicast one to many mode P2P uses Peer IP address above Mcast uses Mcast IP address 14 baat me teng t TA aan RI Pot Pro Coste 4 _ 4 Submit changes changes will be saved when this buttion pressed However if system is rebooted changes will be lost unless also saved in Save Changes menu on left menu bar Set Serial data Baud Rate 1200 11520 Character size CS5 CS8 Parity Odd Even Disable Refresh this web page This section allows users to easily upgrade the Firmware of the ANT 4000E m To upgrade the firmware use the Browse button below to locate the new Firmware file on your computer B Once the F W file is selected click UPLOAD This will cause the ANT 4000E to upload the file into temporary memory This may take several seconds B On
22. ce the UPLOAD process is finished the web page will show a WRITE TO FLASH box as shown below m Pressing WRITE TO FLASH will cause the ANT 4000E to save the file to its Flash memory WARNING Once you press this button do not unplug the power lead as this may cause the system to be corrupted and may not recover or function correctly Make sure the Firmware file is correct before pressing UPLOAD TO FLASH B Once UPLOAD TO FLASH is pressed the system will take several minutes to write the file to Flash and then reboot Do NOT UNPLUG the system at this time or make any further changes until it has rebooted fully All LEDs illuminated and as a minimum LED1 and LED2 illuminated permanently if video is not connected or a decoder is not connected Allow 5 minutes for this take place Current Firmware Write to Flash WARNING SEE ABOVE 5 Y moi Porting TM Rime Deroo Me i UL Lodo L a of Mo New Firmware to be written to Flash Press to upload FW file Browse to Firmware file 16 Information about Decoder connected to this encoder E cate Cireariziy beer linda 5 5 5 DO 5 5 lt Font 99 dor od Madre Out Bas r i Information about this e 6 6666 6666 e e e ooo Encoder e o o o o ner HM SAR ayan r 0 e o o e ec 0900 909 09 e e e e e es e e e ose Sites Pot e o o o o o o A 22 ome ee o Select Video and kade b ben TR Audio Ports UT AO O RI Ka Ld Ne
23. cult for people to remember For example on the web it s much easier to remember the domain name www amazon com than it is to remember its corresponding IP address 207 171 166 48 Each organization that maintains a computer network will have at least one server handling DNS queries That server called a name server will hold a list of all the IP addresses within its network plus a cache of IP addresses for recently accessed computers outside the network The sampling rate is fixed to 32KHz when AAC is selected Note that when ANT 4000E is connected to a decoder the decoder s audio algorithm should be set identically to transmit audio settings O Mode Select audio operation mode Mode Action Off No operation Tx Only Transmit only Rx Only Receive only Tx amp Rx Transmit and Receive O Input Gain Set audio input gain 4 Network Configuration Simple Network Management Protocol SNMP is used by network management systems to communicate with network elements SNMP lets TCP IP based network management clients use a TCP IP based internetwork to exchange information about the configuration and status of nodes SNMP can also generate trap messages used to report significant TCP IP events asynchronously to interested clients For example a router could send a message if one of its redundant power supplies fails or a printer could send an SNMP trap when it is out of paper LJ Local 6 IP mode
24. d for transmitting single real time multimedia data such as audio and video to a select group of connected clients Normally RTSP uses RTP to format packets of multimedia content The RTP Session menu is used when using RTP only streaming without RTSP connection An RTP stream will be transmitted to the destination IP and Port set The SDP Session Description Protocol file can be found in the server and a client can retrieve it using an http connection Related settings are as following Destination IP Set the IP Address for your destination system which will receive the RTP stream Destination Port Set the Port for your destination system which will receive the RTP stream User Name Enter the User name that will be used as session name in the SDP file File Name Enter the file name that will be used as the name of the SDP file Then it can be accessed through http ServerAddress filename A SNMP ANT 4000E can be used as an SNMP agent It is compatible to both SNMPv1 and SNMPvec Settings for using SNMP Simple Network Management Protocol are as following SNMP Listen Port The port is for connecting external devices when the system operates as an SNMP client SNMP is not used by setting a O value SNMP Trap Destination IP Set the SNMP Trap Destination IP SNMP Trap Destination Port Set the SNMP Trap Destination Port SNMP is not used by setting a 0 value 33 Q Multicast A DDNS Multicast IP
25. deo to the Decoder which will display the decoded video on a suitable monitor or TV If the Encoder is streaming correctly all 5 LEDs will be solidly lit On the Decoder all 4 LEDs will be solidly lit LED5 not used on the Decoder Select appropriate Video ports on Encoder for Video and Audio nios beenz Similar setup for video output port on Decoder Pan ILI Pao VW carm LL r ar og Lers Mew rota VM owe vide 1 Pon ded ia Pan ws BK Rosina ow teres og ww we IM tad Pesan 24 O VLC Setup Verna player VLC player can be used as a decoder in both RTSP and MPEG TS modes RTSP supports full AAC audio plus video whilst MPEG TS only supports video Open VLC Player and click MEDIA the OPEN NETWORK STREAM This will open the window shown below Type rtsp 192 168 0 151 8554 Ope stream into the the Please enter a network URL gm m am box Mom th nen reke By checking the Show more options box in the res mm ma m bottom left corner you will have the option to wer Loto Prim rarr Ovis increase or decrease the video buffer size mn TS ee ot hre mor cache Smaller buffer cache lower latency but ia ET possible jitter in video under certain network gada ove conditions We suggest 120mS as a starting point Da vie Car Ca S un WE t Des ys Meee mte a pd F ete BIN MA 8 i A Show more opbors Caching 120 ns Start Time 006 D Pay another media rira ig extra audio Me Mei
26. e ON sign 44 Search and Playback LJ Recorded File Recorded video and audio data can be saved as AVI format on the disk In general one AVI file is created for an event in case of event based recording However it is possible that recorded data caused by series of events happening quickly and continuously may be merged to a single AVI file depending on pre post event time settings The size of file is limited to 10 200MB or 10 minutes In case of continuous recording AVI files are created in series and the size of each is limited to 10 200MB or 10 minutes O Search A file currently being recorded doesn t appear until it is completed In case of Continuous recording a file will be shown after 10 minutes from the start of recording for a file is generated every 10 minutes Press Search Page button on the Record setup page Dates with recording data will be shown as follows Search Page First choose the date to be searched and the list of AVI files will be shown The file name shows the date and time Date Begin Time End Time avi Oo Set p gt vwo System Veo LI Network Serial tvent Preset Record User e Press R UO Playback e Selectin 45 Ta batan Wi Deomm mom sn mmc o RT Seer rewet TI t L Pressing the Save button the file will be stored in the PC The AVI file can be played with Windows Media Player ere f you press Open in
27. ed to ANT 4000D Decoder 41 gt Ma sma En o D0 eming Pie Vae Pee EN om Aws m Part Less Vaiee Lara LR out Jmm Po fade w Pot vee Boga Roepe res Tur at 3 Ho uae HOM fade re ameno Yee PEK tg AN NG adi KRA Vee 20D tee twm Cous com Bar ms den hie t arm CLI ure OTOP Cerva lad Ure fade Dos 4 C 2 Ge E er WE tt E 4 A eau Video Bitrate Maximum setting Video Frame Rate setting 1 30 Turn On Screen Display On or Off Audio Direction X X90000000000000000000000000000000000000 C On each Setup page there is a button called SUBMIT This causes the changes on that page to be enabled However if the system is rebooted these changes will be lost To write the changes on ALL pages into the system FLASH memory go to this page and click SAVE Save System Configurations B system configurations are changed and you warnt current settings to be continued you should save nl Click here to Save ALL changes made and submitted on individual pages to FLASH Next Reboot the system will restart with all settings which were modified and saved using this button 21 LU Reboot Simply this is a Soft Reboot of the system which saves unplugging the 12 volt power cord This is useful if a remote reboot is required Q ul 4 p DEL 4 ad 4 Rea thom Reboot the systern Eserciniyg Mia function wil reboot the system Pr
28. en confirm 4 Open VLC player and in Network type rtsp 192 168 0 151 8054 stream 5 VLC will now decode the incoming rtsp stream from the ANT 4000E More details on setting up VLC player and using MPEG TS are explained in more detail further on in this manual 10 INSTALLATION O Encoder System Connecting Video The ANT 4000E has multiple inputs which can be used to input video B HDMI 1 and HDMI 2 These inputs support video plus audio but must be selected in the Web Setup See System Configuration m Composite CVBS Composite video input in the form of an RCA socket Yellow together with Audio Left and Right RCA sockets White and Red B VGA D Sub Supports VGA analogue inputs from a PC audio is input separately via the stereo Jack socket or RCA socket above B DVI D Supported via one of the HDMI inputs using an external DVI to HDMI dongle not supplied B Component Video Supported via the VGA input using an external Component Video to VGA converter dongle Supplied as an option Connecting Audio The ANT 4000E has two methods to connect Audio m Via the stereo 3 5mm Jack socket B Via the RCA stereo left and right input sockets Audio signal is at line level therefore a microphone or speaker with an amplification function should be used Connecting the Network Cable The ANT 4000E has a 10 100 RJ45 Ethernet port for connection to a network or external wireless device Connecting the Serial Ports The A
29. ess here to Reboot FACTORY RESET To restore the Encoder to Factory default settings and factory IP address 192 168 0 151 HDMI 1 input is default on factory reset Press and Hold Instructions Power Up Hold for 6 seconds after Depower the encoder unplug 12 volt lead power up Factory Reset of all settings Using paper clip press and hold the reset button on the panel Power Up continuing to hold reset button Hold for 6 seconds after power up All settings are now restored to Factory Default 22 Connect ANT 4000E plus ANT 4000D to a network Configure the Decoder with the Encoders IP address and Encoder with Decoders IP address in the PEER IP section of System Setup The example below shows the encoder System Configuration page with the IP address of the Decoder in PEER IP LAN Streaming mode is P2P STREAMING CONTROL WEB PAGE Turn RTSP OFF Encapsulation RTP Video Streaming ON other settings as required Encoder IP address Decoder IP address here Video Streaming c Cacapsulation RTE Codng Mode OF B GOP Sire 1 Intra Count Video Bitrate Mb o4 Frame Mate ASO Status t RTSP Server T Audio Streaming Teo 23 Select the correct Video Input and Output ports on the ANT 4000E and ANT 4000D In all cases make sure you save the setting changes by clicking SUBMIT on each web page and then on completion SAVE CHANGES on the save changes web page The Encoder will now stream Vi
30. in the video are significant or the network capacity is insufficient to maintain certain bit rates continually Bit rate Determine bit rate value between 32 8000kbps Bit rate mode CBR encoding allows you to set a fixed target bit rate that consumes a predictable amount of bandwidth Frame Interval 26 Possible values between 0 and 255 There will be no I frames if 0 is selected H 264 Profile Select H 264 Profile High Profile or Baseline Profile The standard defines various sets of capabilities which are referred to as profiles targeting specific classes of applications Hi wren we s LE a we s Mesa CET iret The p Audio 4 gh definition televis isc storage format Be Primar 1is profile is used il eatures that are su that can be used 1 ideo stream composiurigJ O Dual Encode Use Dual Encode 1 Select Off button on the Enable Preview to Enable use of Dual Encode 2 Select ON to dissable use of Dual Encoding The secondary video can be viewed on Live View window by selecting Secondary on Video selection Dual Compression Algorithm Select Secondary Video compression between H 264 and MJPEG Maximum resolution is 720 x 480 There are 8steps for adjusting this mode If MJPEG is selected only Quality mode is supported U Motion Detection Use Motion Detection Select Motion Detection function 27 Motion Detection Area Editing Soup wanan 1 by the ee Vet date mmn one Gee n Smeg N aa
31. the dialog the file will be downloaded and played automatically with Media Player Another connection through the web is disabled during downloading and it is also not possible to download two AVI files at the same time O Deletion f you want to delete recorded files select the files by checking the item in front of each file and press the Delete button 46 It is possible to delete multiple files at once E Formatting Disk True Manager is used to format a disk which is connected to the system After connecting True Manager to a system choose Disk Manage on the Tools menu Check the status of the disk in the dialog and press Disk Format to format the disk System Video Audio Network Serial Event Preset Record User Add User During formatting a disk the progress will update on the Disk Status item The system may be rebooted depending on the situation Once USB Disk available is displayed it means that formatting is completed successfully Once formatting is started it is not possible to cancel this Even if you close the Disk Manage dialog formatting will continue Trouble Shooting 47 There may be a damaged file system if you turn off the power of the ANT 4000E or disconnect the USB memory s n case of FAT disk or memory Modity Password In case of EXT executed at init System Video Audio Network Serial Event Preset Record User ed If this happens the itself
32. tion is not included in transmission interval For example if upload interval is 60 seconds and upload duration is 20 seconds a video clip for 20 seconds is transmitted every 80 seconds O Event Record Specify duration of recording video generated by events to send through e mail or upload Setup Live Vierw Change User nS Nah rnm O Aunty Noti EIE URALI ese Record II e Record Appi Search Page quedar 39 Configure up to 15 preset positions Preset function is not available on some PTZ receivers Make sure to check if a PTZ receiver supports preset O Preset Configuration e Set the PTZ Presets by following the next steps Move cameras to desired view using PTZ control buttons Enter Preset name Press Set button Once all the presets are set press Save List button e Move to Preset Position Select a preset from the Preset and press Go To button the camera will move to the selected preset position 8 Recording Configuration 40 Disk Manage Syttem ID Video Server Feronia Veron Encode v1 TOSO USB Device USB hard Gon ur u sos y Stick can be used and at least 1GB size is recommended Either EXT3 or FAT32 file system can be used A disk with either EXT3 or FAT32 file system can be read in a Linux PC However only a memory stick with FAT32 file system can be read in a Windows PC In 41 case of formatting through True Manager the disk is formatted as EXT3 The File system can be
33. to the settings Customers with both units should test this configuration first This is the low latency mode proprietary mode O Quick Start Connecting a web browser to adjust change settings The ANT 4000E D has a web interface for setting up all parameters network functions etc Currently you must use Internet Explorer for this function Having connected the ANT 4000E to a video audio source and 12vDC next connect the ethernet port to an ethernet network switch using an RJ45 ethernet cable not supplied Connect a laptop or PC to the same network that the ANT 4000E is connected to ANT 4000E Factory default IP address is 192 168 0 151 ANT 4000D is 192 168 0 152 O Quick Start Streaming video to VLC player Set Top Box The ANT 4000E can be set to stream video to a software decoder such as VLC player There are two modes supported a RTSP video plus Audio b MPEG TS mode Video Only Top test Software decoding using VLC player please follow these instructions 1 Browse to the ANT 4000E IP address using Internet Explorer Active X is used to control and change settings so your browser may ask if it is safe to install Active X control 2 On the Streaming Control page select the RTSP SERVER pull down menu and select ON Then press SUBMIT to save these setting changes to RAM 3 If you wish to save this configuration to FLASH memory so that after next power up these settings will be default go to SAVE SETTINGS and click SAVE th
34. unstable and easily broken if you format the disk in FAT32 on Windows PC Recording features has been added from 102D 001 firmware version Less than 4Mbps of video bit rate is recommend when you record and monitor video at the same time since it may cause frame loss Disk information and recording setup Be sure to restart the system after connecting a USB disk During booting the system reads status of disk and initializes it Once the initialization of a disk is finished the status of disk is shown on Record page of web based setup Q Disk Information The status of a disk can be checked from the Disk Manage menu of True Manager as well Refer to the chart for checking the status of disk Diskstatus Description Disk error detected Nodik O Disk is not connected to the system 42 ned Disk information Dc aed the status of disk Refresh the page and wait until the status is Dc aed en and Performing recovery process when disk damage is found Recovering Disk It takes from seconds to minutes for recovering Mert format needed Disk is attached but the type of the file system is Unknown disk Unknown disk type detected detected unknown or damaged USB Disk available Disk is available but formatting is recommended format is recommanded USB Disk available Available to be used for recording Disk formatting Start Disk is being formatted Disk formatting System should not be turned off during
Download Pdf Manuals
Related Search