User Manual
Contents
1. Configuration for further detail page 8 TIPS The remote control is based on infra red light waves being emitted Therefore please ensure the head of the remote control is not blocked in any way as this will prevent the unit from receiving the infra red signal from the controller Low voltage batteries installed in the remote controller will shorten the distance the remote control can be used During long periods of time when the remote control is not being used please remove the batteries to avoid any damage to the circuitry INSTALLATION Step 1 Fasten the mounting brackets with the supplied screws and place the unit onto the mounting brackets Step 2 Once the unit is securely attached to the bracket adjust the unit to the desired viewing angle The user can also connect the unit directly to a monitor using the supplied AV cable to confirm the required positioning and view angle Step 3 When the device is connected to the TV Monitor the user will see the following icons based upon which recording mode they have selected Current Time and Date Recording Time gt Device is recording DEE Manual Recording Mode Motion Detection Mode Please Note Check the device regularly If you detect any abnormal performance check the power connection or restart the unit CONFIGURATION Step 1 Connect the unit to a computer using the USB cable provided and switch on the power to the unit U2. again to disable the recording and the standby indicator will light up again Please Note Under Motion Detection the Standby Indicator will flash to confirm that motion has been detected and recording has commenced PLAYBACK Step 1 Connect the unit to a PC using the provided USB cable and ensure that the unit is switched on E USB CABLE m U am an HEEE EEz Huzam am _ gt Step 2 Once connected the PC will find the unit as a new removable hard disk If it is not detected automatically the user can search for the unit via My Computer on the PC Additionally the user can also insert the micro SD card directly into a PC if it has a specific drive slot or use a convertor reader Step 3 The recorded video files can then be found as AVI formatted files in a folder labelled Videos Step 4 Double click the desired video files to watch using a suitable video player Please Note Check the device regularly If you detect any abnormal performance check the power connection or restart the unit Do not remove the micro SD card during recording or when the unit is starting to avoid damaging the card unit or files The unit has an auto file overwriting function which will begin to delete the earliest dated files Therefore if you have any important files please copy them in time To avoid false motion triggering please avoid facing the unit directly to strong light If the unit
3. CCTV Model ROOM I USER GUIDE HD Recording PIR Spy Camera TECHNICAL SUPPORT For Technical Support please contact your local distributor LIMITED WARRANTY This product is supplied with a 1 Year warranty The Warranty excludes products that have been misused including accidental damage and damage caused by normal wear and tear In the unlikely event that you encounter a problem with this product it should be returned to the place of purchase Version 1 0 CONTENTS Safety Instructions nennen Product Contents LL k Product Description EE Remote Control 24402220000n onen nnnnn nenn IT STA lA HOL ses nee CONMNGUPAN ON nennen RECON essi e PIAYDA CK ersari Oa eher ee Specification Table aus nsa nn EZE CAUTION The product is in conformity with CE FCC and ROHS It is authorized to bear the FCC CE and ROHS mark EU Environment Protection Electrical waste products should not be disposed of with household waste Please recycle where facilities exist Check with your local Authority or retailer for recycling advice CE FC RoHS A SAFETY INSTRUCTIONS Please read these instructions before using the product Since this product is controlled by a microcomputer chip it is possible that a system fault may occur if users operate it incorrectly In this case please reset the unit This product is neither waterproof nor dust proof and therefore it can not
4. SB CABLE m a Le za uz BEER gt x Step 2 Once connected the PC will find the unit as a new removable hard disk If it is not detected automatically the user can search for the unit via My Computer on the PC Once the relevant folder has been found open the file called DVXSet exe which will open the unit s settings detailed below as follows r FR System Setting Date Time Date TimeFormat MD Sensitive B LightFrequency HZ so J ImageQuality High 7 OverWrite lon se Bell 0N SAVE EXIT DATE Set the date in the format Year Month Date TIME Set the date in the format Hour Minute Seconds DATE TIME Set Date and Time format YY MM DD or DD MM YY or MM DD YY MD SENSITIVE Select the Motion Detection Sensitivity between 1 5 5 is the highest LIGHT FREQENCY Hz Select appropriate option for your country i e 50Hz for Europe and China 60Hz for America and Japan IMAGE QUALITY Resolution settings HD High D1 Standard or VGA Low OVERWRITE ON means it overwrites when the memory card is full Consequently OFF means that the memory card will not be overwritten once full H BELL ON means that pressing the remote control buttons to control the unit will generate a sound Similarly OFF ensures no sound is produced m 0 o g gt Q m Step 3 After changing the required settings
5. be used outdoors or in an adverse environment Please use the provided DC power supply to avoid causing the device any damage electric shock or fire Unauthorised dismantlement of the device or replacement of device parts is forbidden The manufacturer will not be responsible for any loss arising from such actions To avoid an explosion please do not place the device into fire oven or microwave oven As a result of version changes the user manual may differ from the original product PRODUCT CONTENTS The following items are included ROOM I PIR Camera e Camera Bracket e Remote Controller e Power Adapter AV Cable e USB Cable e x2 Screws and Wall Plugs e User Manual UJ PRODUCT DESCRIPTION LED Lights AV Output Camera USB Port Micro Microphone SD Slot Standby Indicator IR Receiver Q rower amp 4 Power Indicator Set Power ON OFF Bracket Motion Detection Trigger REMOTE CONTROL Manual Stop Recording Recording A B Enable MONON Disable Detection Motion C Detection D When using the remote control aim it directly to the unit s receiver module By pressing A C buttons the unit will make two Tick sounds By pressing B D buttons the unit will make one Tick sound Please Note The sounds confirming the unit has received instructions from the remote control can be switched on off by the user Please see the section
6. is facing a window the changing light conditions may set off false triggers In low light conditions or if the moving object is the same as the background the motion sensitivity may not be as accurate SPECIFICATION TABLE Resolution 1280x720 720x480 640x480 Internal Memory N A Micro SD Card required A Motion Detection Recording Modes Continuous Weather Resistant Vandal Resistant Wall Z Z O O Mounting Type Dimensons mm 60 Width x 103 Height x 29 5 Depth Weight Kg 00 Warranty 1 Year Limited Warranty BE D OLux IR on de TT TTTTTT 10
7. press the SAVE button Then press the SET button on the back of the camera for 3 5 seconds The removable hard disk will now disappear from the PC and the standby indicator will light up to confirm the settings have been saved and finished RECORDING Step 1 Insert a Micro SD Card into the unit Step 2 Insert the provided power supply plug into the DC socket and place the power switch to the ON position to start the unit The power and standby indicators will light up to confirm the unit is ready to use Step 3 The user can choose from 2 recording modes Motion Detection The unit will only record if it detects a movement The unit s recording will include 3 seconds prior to the motion being detected and 15 seconds after the motion Continuous Manual The unit will continuously record until either the user stops recording or if the memory card is full The unit has a data overwrite when the card reaches its capacity Please see section Configuration page 7 for more details The user can use the remote control to enable either the Continuous or Motion Detection recording see page 5 for further details Additionally the user can press the press the Trigger button located on the back of the unit to start the Motion Detection recording function manually The standby indicator light will switch off once recording has successfully started Step 4 Use the remote control or Trigger button
Download Pdf Manuals
Related Search