WirelessUSB™ - UGWG4US USER MANUAL
Contents
1. CA 94538 USA declare under our sole responsibility that the product s WirelessUSB UGWG4US to which this declaration relate s is in conformance with the following standards EN 300 328 v1 3 1 EN 301 489 17 EN 55022 limits B following the provisions of the 73 23 EEC and 89 336 EEC Directives F yf 1 D AGE Unigen Corporation Fremont CA Mark Morrissey Director of Business Development we g MECHANI CAL CHARACTERI STI CS Item Description Specification 1 PCB Material FR 4 2 PCB Layers 2 3 Connector Type Straight thru hole or header mirrored through hole or header bare Please see Table 4 for pin assignments 4 PCB Number PDC 9208 LETO W 5 Flammability Rating UL94 V 0 6 UGWG4US Dimensions 0 950 x 0 950 x 0 375 24 13mm x 24 13mm x 9 525mm 8 User Serviceable Parts None UM UGWG4US 16 45388 Warm Springs Blvd Fremont CA 94539 support unigen com TEL 510 668 2088 FAX 510 661 2788 http www unigen com Toll Free 800 826 0808 Copyright Unigen Corporation 2007 Uni n isen WirelessUSB UGWG4US Solutions for a Real Time World User Manual APPENDIX B FCC Grant REKUGWG4USHN33A The modular transmitter is approved for use in Digital Electronic Devices and may operate in conjunction with other mobile and portable transmitters in the same device provided the other mobile and portable transmitters have satisfied the appropriate RF2. regulations governing a radio transmitter in the 2 400 GHz to 2 4835 GHz frequency range The following countries associated regulatory agencies recognizing the noted certifications for this product as authorized for sale and use are USA Canada Belgium Denmark France Finland Germany Italy Netherlands Spain Sweden UK This list will be updated to reflect additional grants obtained or needed in future revisions Note As of the date of publication Japan does not recognize the Modular Approval certification Regulatory certification for Japan TELEC must be acquired through typical approval procedures These approvals are the sole responsibility of the OEM Unigen may recommend upon request TELEC certified laboratories capable of facilitating the appropriate test procedures for the UGWG4US UM UGWG4US 5 45388 Warm Springs Blvd Fremont CA 94539 support unigen com TEL 510 668 2088 FAX 510 661 2788 http www unigen com Toll Free 800 826 0808 Copyright Unigen Corporation 2007 Uni nigen WirelessUSB UGWG4US Solutions for a Real Time World User Manual Topics Not Covered Topics that not covered in this manual include gt Standard type approval for any country gt Japan s TELEC regulatory approvals UM UGWG4US 6 45388 Warm Springs Blvd Fremont CA 94539 support unigen com TEL 510 668 2088 FAX 510 661 2788 http www unigen com Toll Free 800 826 0808 Copyrig
3. required to be submitted to the FCC or Unigen but should be kept on file by the OEM Note The European Union generally follows the guidelines of the FCC for emissions level requirements FCC end product compliance certification results if available may be used to satisfy EU requirements Substitution Method Please consult the ETS 300 328 specifications to confirm inter agency compliance If comparable FCC testing has not been performed or if the specifications are not cross compliant ETS 300 328 testing will be required Additionally testing to the ETSI 301 489 17 immunity testing is strongly recommended Unigen assumes no responsibility for compliance of the end product configuration UM UGWG4US 12 45388 Warm Springs Blvd Fremont CA 94539 support unigen com TEL 510 668 2088 FAX 510 661 2788 http www unigen com Toll Free 800 826 0808 Copyright Unigen Corporation 2007 Uni n isen WirelessUSB UGWG4US Solutions for a Real Time World User Manual Exterior Labeling Requirements European Union product labeling requirements stipulate specific text is placed on the device containing the UGWG4US module The product must include the following text and must be located on the exterior of the OEM s product This same information may be included in the product user manual however is not mandatory Packaging and user documentation must indicate the use restrictions of the end product i e countries disallowing the ope
4. documented installation and or use of the UGWG4US will void the MA Grant as it applies to the end product In the event the Digital Electronic Device manufacturer alters the herein described and approved installation of the UGWG4US the end product may require a complete battery of regulatory agency certification test Digital Electronic Device manufacturer may be required to submit to a complete battery of tests depending on the requirements noted in the region they wish to sell their product The MA Grant provides that Digital Electronic Device manufacturers who incorporate UGWG4US as tested and approved and can be relieved from having to perform the Radio Regulatory certification portion of the respective agency certification The MA Grant is valid only in countries that recognize the MA Grant certification process Countries currently accepting the MA Grant include the USA Canada and many European countries as noted in the General User Guide Requirements Section of this document Terms and conditions of regulatory approval for these countries are also described herein However this grandfathered radio certification does mot relieve the Digital Electronic Device manufacturers from submitting their device for digital emissions certifications Electronic device manufacturers may disregard the requirements of this section provided they accept full responsibility for regulatory type approval of the electronic device with an integrated UGWG
5. exposure requirements contained in the FCC rules The grantee must also provide Digital Electronic Device integrators or end users if marketed directly to end users with installation and operating instructions for satisfying RF exposure requirements The Grantee must inform second manufacturers installers that in order for this module to be operated in any configuration other than that permitted in the preceding sentences a separate FCC equipment authorization must be obtained for each device into which this module is installed UM UGWG4US 17 45388 Warm Springs Blvd Fremont CA 94539 support unigen com TEL 510 668 2088 FAX 510 661 2788 http www unigen com Toll Free 800 826 0808 Copyright Unigen Corporation 2007
6. gt Unigen WirelessUSB UGWG4US Solutions for a Real Time World User Manual UNIGEN CORP WIRELESS MODULE PRODUCTS PART NUMBER FAMILY UGWG4US SERIES LETO M WIRELESSUSB RADIO MODULE USER MANUAL FCC I D REKUGWG4USHN33A Issue Date 15 May 2007 Revision 0 90 Revision History Rev No History Issue Date Remarks 0 9 Draft Release 15 May 2007 Pending FCC Grant 0 91 2 Draft Inclusion of FCC Grant THIS DOCUMENT IS PROVIDED AS IS WITH NO WARRANTIES WHATSOEVER INCLUDING ANY WARRANTY OF MERCHANTABILITY NON INFRINGEMENT FITNESS FOR ANY PARTICULAR PURPOSE OR ANY WARRANTY OTHERWISE ARISING OUT OF ANY PROPOSAL SPECIFICATION OR SAMPLE Unigen Corporation disclaims all liability including liability for infringement of any proprietary rights relating to use of information in this document No license expressed or implied by estoppel or otherwise to any intellectual property rights is granted herein Third party brands names and trademarks are the property of their respective owners Copyright Unigen Corporation 2007 UM UGWG4US 1 45388 Warm Springs Blvd Fremont CA 94539 support unigen com TEL 510 668 2088 FAX 510 661 2788 http www unigen com Toll Free 800 826 0808 Copyright Unigen Corporation 2004 Unigen Solutions for a Real Time World ELI GI BI LI TY REQUIREMENTS FOR REGULATORY MODULE APPROVAL User Guide I nformation United States of Americ
7. manufacturers using this MA grant should refer to Appendix B FCC Grant for end products using two or more co located RF transmitters This grant states This modular transmitter is approved for use in Digital Electronic Devices and may operate in conjunction with other mobile and portable transmitters in the same device provided the other mobile and portable transmitters have satisfied the appropriate RF exposure requirements contained in the FCC rules The grantee must also provide Digital Electronic Device integrators or end users if marketed directly to end users with installation and operating instructions for satisfying RF exposure requirements The Grantee must inform second manufacturers installers that in order for this module to be operated in any configuration other than that permitted in the preceding sentences a separate FCC equipment authorization must be obtained for each device into which this module is installed This modular approval is granted provided Digital Electronic Devices manufacturers assume responsibility for ensuring that other transmitters operating in conjunction with the UGWG4US comply with RF exposure requirements associated with their use The use of one or more additional RF transmitters will require review by the FCC and may require end product re certification including the UGWG4US to ensure emissions compliance and RF safety It is the sole responsibility of the Digital Electronic Device manufacturer
8. the final device configuration for Digital Emissions Compliance The UGWG4US may not be altered or modified in any way by the OEM or other integrator s Additionally no component s may be added which change the radio frequency RF characteristics These include unintentional or spurious emissions immunity ESD characteristics or other items commonly associated with RF devices This includes all components passive and active such as RF filters RF amplifiers RF switches etc Additionally no RF components may be placed between the RF output of the UGWG4US and the antenna e except the RF interconnect transmission line Antennae The antenna is integrated in the module and has been qualified and approved for use under the Modular Approval certification This antenna is designed to be compatible with the RF impedance and frequency range of the UGWG4US This antenna may not be modified or altered in any way from the original design as represented by the manufacturer The antenna selected have been specifically tested with the UGWG4US and they are certified through the regulatory agencies in the US Canada and European Union for authorized use Use of an altered antenna in a platform other than the antenna selected by Unigen voids the MA grant for that platform Emissions Compliance Testing Notwithstanding the Modular Approval for the Radio Device with associated interconnect and antennae the end product configuration must meet digital e
9. to obtain end product regulatory compliance for configurations including two or more RF transmitters Product Labeling Requirements FCC product labeling requirements stipulate an FCC label including specific text be placed on the device containing the UGWG4US module The product label must include the following text and must be affixed to the exterior of the OEM s product The text should be located beneath the FCC compliance logo Module FCC ID REKUGWG4USHN33A UM UGWG4US 8 45388 Warm Springs Blvd Fremont CA 94539 support unigen com TEL 510 668 2088 FAX 510 661 2788 http www unigen com Toll Free 800 826 0808 Copyright Unigen Corporation 2007 gt Unigen WirelessUSB UGWG4US Solutions for a Real Time World User Manual I NDUSTRY CANADIAN REGULATORY APPROVAL Industry Canada regulatory approval typically conforms to the FCC in terms of emission levels and other regulatory requirements It is the position of the Industry Canada agency that the OEM primarily responsibility for ensuring end product compliance Unigen as grantee and supplier of the module maintains responsibility for the Modular Approved design Design Criteria for Modular Approval General Conditions The following conditions must be strictly adhered to for modular approval 1 No modification to the module including the circuitry is permitted 2 The design criteria including antenna interconnects and transmission line 3 Testing of
10. 4US wireless module UM UGWG4US 4 45388 Warm Springs Blvd Fremont CA 94539 support unigen com TEL 510 668 2088 FAX 510 661 2788 http www unigen com Toll Free 800 826 0808 Copyright Unigen Corporation 2007 gt Unigen WirelessUSB UGWG4US Solutions for a Real Time World User Manual User Guide Information Electronic device manufacturers using Unigen s Modular Approval are required to place the below text in their product user s guide in accompaniment with other regulatory information The text may be disbursed according to language or geographic regions if desired but the exact text shown below must be maintained United States of America Requirements The following text must be copied exactly into the products user s guide This device complies with part 15 of the FCC rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Caution Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment General User Guide Requirements The following text must be copied exactly into the product s user s guide This product contains a radio transmitter with WirelessUSB technology which has been tested and found to be compliant with the applicable
11. a Requirements General User Guide Requirements Topics Not Covered UNITED STATES REGULATORY APPROVAL FCC MODULAR APPROVAL MA Design Criteria for Modular Approval General Conditions Antennae Antenna Interconnect amp Impedance Physical mplementation Emissions Compliance Testing Co location of Additional Transmitters Product Labeling Requirements INDUSTRY CANADIAN REGULATORY APPROVAL Design Criteria for Modular Approval General Conditions Antennae Antenna Interconnect amp Impedance Physical I mplementation Emissions Compliance Testing Product Labeling Requirements UM UGWG4US 2 support unigen com http www unigen com Copyright Unigen Corporation 2007 WirelessUSB UGWG4US User Manual SIAN N OUUU A Error Bookmark not defined Error Bookmark not defined O O O OoOo O N Error Bookmark not defined Error Bookmark not defined 9 10 45388 Warm Springs Blvd Fremont CA 94539 TEL 510 668 2088 FAX 510 661 2788 Toll Free 800 826 0808 gt Unigen WirelessUSB UGWG4US Solutions for a Real Time World User Manual EUROPEAN UNION REGULATORY APPROVAL 11 Design Criteria for Modular Approval 11 General Conditions 11 Antennae 11 Antenna Interconnect amp Impedance 11 Emissions Compliance Testing 12 Exterior Labeling Requirements 13 UNI TED STATES AND I NTERNATI ONAL TYPE APPROVAL STANDARD REGULATORY EQUI PMENT CERTI FI CATI ON 14 CONTACT INFORMATI ON 14 APPENDI X A 15 A
12. ed for use under the Modular Approval certification This antenna is designed to be compatible with the RF UM UGWG4US 11 45388 Warm Springs Blvd Fremont CA 94539 support unigen com TEL 510 668 2088 FAX 510 661 2788 http www unigen com Toll Free 800 826 0808 Copyright Unigen Corporation 2007 Uni n isen WirelessUSB UGWG4US Solutions for a Real Time World User Manual impedance and frequency range of the UGWG4US This antenna may not be modified or altered in any way from the original design as represented by the manufacturer The antenna selected have been specifically tested with the UGWG4US and they are certified through the regulatory agencies in the US Canada and European Union for authorized use Use of an altered antenna in a platform other than the antenna selected by Unigen voids the MA grant for that platform Emissions Compliance Testing The end product configuration must meet digital emissions compliance and must be tested in accordance with the European Union standards ETSI 300 328 European Telecommunications Standard for 2 4 GHz ISM band Emissions and ETSI 300 826 Electromagnetic Compatibility Detailed European Union documents may be obtained from the web location http europa eu int comm enterprise rtte infor htm These emissions tests can be conducted by the manufacturer or by contacting an approved test facility equipped and certified accordingly The results of these emissions tests are not
13. er Spectral Density PSD 15 247 d PASS Results on File Bandedge FCC Part 15 209 PASS Results on File 15 247 c Out of band 15 247 c PASS Results on File Output Power Power spectral density EN 300 328 1 PASS Results on File at normal conditions Frequency Range at normal EN 300 328 1 PASS Results on File conditions Output Power over extreme EN 300 328 1 PASS Results on File Radio Performance Test condiLoNS Frequency Range over extreme EN 300 328 1 PASS Results on File EU conditions Conducted spurious emissions 30MHz EN 300 328 1 PASS Results on File 12750MHz transmit mode Conducted spurious emissions 30MHz EN 300 328 1 PASS Results on File 12750MHz receive stand by mode 30 12 750 MHz Spurious Emissions EN 300 328 V1 2 1 PASS Results on File Radiated Spurious Transmit Mode Emissions 30 12 750 MHz Spurious Emissions EN 300 328 V1 2 1 PASS Results on File Receive Mode Table 5 Regulatory Agency Certifications Regulatory Compliance Statement The Unigen LETO M UGWG4US WirelessUSB module has been tested against the relevant requirements of standards EN 300 328 EN 301 489 17 FCC part 15 and Industry Canada RSS 210 The module is certified by the regulatory authorities in the USA and Canada and complies with the applicable essential requirements of the Radio amp Telecommunication Terminal Equipment R amp TTE directive in the EU The module can thus be incorporated into products sold world
14. gency Certifications 15 Regulatory Compliance Statement 15 EUROPEAN UNI ON DECLARATI ON OF CONFORMI TY 16 MECHANI CAL CHARACTERI STI CS 16 APPENDI X B 17 FCC Grant RBKUGWG4USHN33A 17 UM UGWG4US 3 45388 Warm Springs Blvd Fremont CA 94539 support unigen com TEL 510 668 2088 FAX 510 661 2788 http www unigen com Toll Free 800 826 0808 Copyright Unigen Corporation 2007 Uni i n isen WirelessUSB UGWG4US Solutions for a Real Time World User Manual ELI GI BI LI TY REQUIREMENTS FOR REGULATORY MODULE APPROVAL The Unigen UGWG4US WirelessUSB module the UGWG4US marketed under the name LETO M is a device that transmits and receives radio signals in accordance with the spectrum regulations for the 2 4 GHz unlicensed frequency range Regional regulatory agency approval may be required to operate UGWG4US throughout the world For purposes of ease of integration time to market and product surety Unigen submitted UGWG4US to relevant agencies and obtained regulatory approvals for specific countries UGWG4US was approved under the Modular Approval MA Grant This certification represents a significant cost savings to the OEM The radio certification portion of this grant is transferable to Digital Electronic Device manufacturers given adherence to specific implementation criteria noted herein Any modification of the UGWG4US will void the manufacturer s warranty Any alteration or deviation from the
15. he UGWG4US This antenna may not be modified or altered in any way from the original design as represented by the manufacturer The antenna selected have been specifically tested with the UGWG4US and they are certified through the regulatory agencies in the US Canada and European Union for authorized use Use of an altered antenna in a platform other than the antenna selected by Unigen voids the MA grant for that platform Emissions Compliance Testing Notwithstanding the Modular Approval for the Radio Device with associated antenna the end product configuration must meet digital emissions compliance and must be tested in accordance with FCC Part 15 requirements confirming radiated emissions are within specified limits Applicable sections include UM UGWG4US 7 45388 Warm Springs Blvd Fremont CA 94539 support unigen com TEL 510 668 2088 FAX 510 661 2788 http www unigen com Toll Free 800 826 0808 Copyright Unigen Corporation 2007 Uni n isen WirelessUSB UGWG4US Solutions for a Real Time World User Manual e Part 15 Section 15 109 Sub paragraph A Class B Radiated Emission Limits These emissions tests can be conducted by the manufacturer or by contacting an approved test facility equipped and certified accordingly The results of these emissions tests are not required to be submitted to the FCC or Unigen but should be kept on file by the OEM Co location of Additional Transmitters Digital Electronic Devices
16. he UGWG4US the interconnect and the antennae as the manufacturer The R amp TTE directive maintains that first level compliance be reviewed by a Notified Body prior to general product marketing This is not mandatory but reduces the risk of the product being challenged for non compliance Although not specifically stated in the R amp TTE Directive corrections of non compliance issues are the responsibility of the end product manufacturer Design Criteria for Modular Approval General Conditions The following conditions must be strictly adhered to for modular approval 1 No modification to the module including the circuitry is permitted 2 The design criteria including antennas interconnects and transmission line 3 Testing of the final device configuration for Digital Emissions Compliance The UGWG4US may not be altered or modified in any way by the OEM or other integrator s Additionally no component s may be added which change the radio frequency RF characteristics These include unintentional or spurious emissions immunity ESD characteristics or other items commonly associated with RF devices This includes all components passive and active such as RF filters RF amplifiers RF switches etc Additionally no RF components may be placed between the RF output of the UGWG4US and the antenna e except the RF interconnect transmission line Antennae The antenna is integrated in the module and has been qualified and approv
17. ht Unigen Corporation 2007 gt Unigen WirelessUSB UGWG4US Solutions for a Real Time World User Manual UNITED STATES REGULATORY APPROVAL FCC MODULAR APPROVAL MA The requirements for FCC Modular Approval were released in June 2000 in the FCC s Public Notice FCC Public Notice DA 00 1407 Part 15 Unlicensed Modular Transmitter Approvals Design Criteria for Modular Approval General Conditions The following conditions must be strictly adhered to for modular approval 1 No modification to the module including the circuitry is permitted 2 The design criteria including antenna interconnects and transmission line 3 Testing of the final device configuration for Digital Emissions Compliance The UGWG4US may not be altered or modified in any way by the OEM or other integrator s Additionally no component s may be added which change the radio frequency RF characteristics These include unintentional or spurious emissions immunity ESD characteristics or other items commonly associated with RF devices This includes all components passive and active such as RF filters RF amplifiers RF switches etc Additionally no RF components may be placed between the RF output of the UGWG4US and the antenna Antennae The antenna is integrated in the module and has been qualified and approved for use under the Modular Approval certification This antenna is designed to be compatible with the RF impedance and frequency range of t
18. missions compliance and must be tested in accordance with Industry Canada RSS 210 Low Power License Exempt Radio communication Devices requirements confirming radiated emissions are within specified limits UM UGWG4US 9 45388 Warm Springs Blvd Fremont CA 94539 support unigen com TEL 510 668 2088 FAX 510 661 2788 http www unigen com Toll Free 800 826 0808 Copyright Unigen Corporation 2007 Unigen WirelessUSB UGWG4US Solutions for a Real Time World User Manual Applicable sections include e Part 15 Section 15 109 Sub paragraph A Class B Radiated Emission Limits These emissions tests can be conducted by the manufacturer or by contacting an approved test facility equipped and certified accordingly The results of these emissions tests are not required to be submitted to the FCC or Unigen but should be kept on file by the OEM Note Industry Canada generally follows the guidelines of the FCC for emissions level requirements FCC end product compliance certification results may be used to satisfy Industry Canada requirements Please consult the Industry Canada RSS 210 specifications to confirm inter agency compliance If comparable FCC testing has not been performed or if the specifications are not cross compliant RSS 210 testing will be required Product Labeling Requirements Industry Canada product labeling requirements stipulate specific text be placed on the device containing the UGWG4US module The produc
19. rating frequencies of the UGWG4US C 01220 The end product must be labeled CE and an exclamation mark to the right of the CE mark should have with a circle around it The exclamation mark designates a non harmonized frequency band UM UGWG4US 13 45388 Warm Springs Blvd Fremont CA 94539 support unigen com TEL 510 668 2088 FAX 510 661 2788 http www unigen com Toll Free 800 826 0808 Copyright Unigen Corporation 2007 x Unigen WirelessUSB UGWG4US Solutions for a Real Time World User Manual UNITED STATES AND I NTERNATI ONAL TYPE APPROVAL STANDARD REGULATORY EQUI PMENT CERTIFICATION OEMs may need to obtain standard equipment regulatory agency certification as previously noted herein and for end product deployment in countries where Modular Approval is not recognized or for implementations using non certified antennae or interconnections The details of standard equipment regulatory compliance are beyond the scope of this document OEMs needing standard equipment regulatory testing or who need council for determining regional requirement should contact approved certification and test service providers accordingly The following test house s have been identified by Unigen to assist in both US and International approval processes This list is by no means complete or preferential 1 M Flom Associates Inc Filing with certification facilities typically requires the submission of technical info
20. rmation ie block diagrams schematics etc pertinent to the radio portions of the UGWG4US Unigen will provide assistance in obtaining such documents when required by the OEM CONTACT I NFORMATI ON Outside of the United States of America To locate in country Unigen distributors of the UGWG4US please refer to the Unigen Website www unigen com These distributor s represent local contacts for this product CORPORATE HEADQUARTERS Unigen Corporation 45388 Warm Springs Boulevard Fremont CA 94539 USA Mark Morrissey 1 510 688 2088 X2087 Fax 1 510 661 2767 Email mmorrissey unigen com Web www unigen com UM UGWG4US 14 45388 Warm Springs Blvd Fremont CA 94539 support unigen com TEL 510 668 2088 FAX 510 661 2788 http www unigen com Toll Free 800 826 0808 Copyright Unigen Corporation 2007 Unigen Solutions for a Real Time World WirelessUSB UGWG4US User Manual APPENDIX A Agency Certifications Agency Test Performed Type Limit Result Margin EU Radiated Spurious 30 12 75MHz Transmit Mode EN 300 328 PASS Results on File Emissions 30 12 75MHz Transmit Mode EN 300 328 PASS Results on File 30 25 000 Spurious Emissions FCC Part PASS Results on File 15 209 15 247 c 6dB Bandwidth 15 247 a PASS Results on File FCC l ae 99 Bandwidth IC RSS 210 PASS Results on File 15 247 Radiated Emissions Output Power 15 247 b PASS Results on File Pow
21. t must include the following text and must be located on the exterior of the OEM s product This same information must be included in the product user manual This product contains Unigen WirelessUSB module Canadian Cert No IC 5125A UGWG4US UM UGWG4US 10 45388 Warm Springs Blvd Fremont CA 94539 support unigen com TEL 510 668 2088 FAX 510 661 2788 http www unigen com Toll Free 800 826 0808 Copyright Unigen Corporation 2007 Unigen WirelessUSB UGWG4US Solutions for a Real Time World User Manual EUROPEAN UNION REGULATORY APPROVAL The requirements for EU Regulatory Approval were released in April 2000 in the EU R amp TTE Directive This directive supports self directed testing and certification for harmonized bands within OEM facilities or by third party In the case of WirelessUSB standards have become harmonized although frequencies are not The R amp TTE directive no longer requires a Technical Construction File however frequency notification to EU countries is still applicable Article 6 of the R amp TTE directive states The manufacturer or the person responsible for placing the apparatus on the market provides information for the user on the intended use of the apparatus together with the declaration of conformity to the essential requirements Ensuring regulatory compliance of the end product is the sole responsibility of the OEM Unigen maintains responsibility for conformance of t
22. wide with little or no additional testing of the module itself The end product must meet the appropriate technical requirements that apply to that product type but re certification of the radio module is not required in the USA and Canada In the EU the integrator is responsible for evaluating their product type per the essential performance requirements of the R amp TTE directive except those associated with the module declaring compliance and then notifying the member states prior to marketing the product because the module uses a frequency band that is not harmonized in the EU It is the responsibility of the module integrator to obtain the necessary approvals to sell products incorporating this module in other countries outside of North America and the EU The report of measurements performed on the module in compliance with the FCC rules and EN standards can be used in these submittals as the requirements in many other markets around the world are based in part or in whole on the standards prevalent in North America and the EU UM UGWG4US 15 support unigen com http www unigen com 45388 Warm Springs Blvd Fremont CA 94539 TEL 510 668 2088 FAX 510 661 2788 Toll Free 800 826 0808 Copyright Unigen Corporation 2007 x Unigen WirelessUSB UGWG4US Solutions for a Real Time World User Manual EUROPEAN UNION DECLARATION OF CONFORMITY DECLARATION OF CONFORMITY Unigen Corporation 45388 Warm Springs Blvd Fremont
Download Pdf Manuals
Related Search