to the ATC-CTR07 manual.
Contents
1. Unit ver 1 2 Insert password Go back to the Menu Window To access the menu window use the close icon Rotate the knob until the icon is selected which will appear on a dark background Press the knob to confirm the selection made the menu window opens User Parameters The use can configure the air changes in order to obtain the best compromise between maximum performance and satisfactory comfort The parameters window is accessed via the selection menu Menu Parameters Parameters me Season winter heating clean air Selecting the Season Selecting the correct season makes it possible to make optimum use of the heat exchanger while forgetting to update the season leads to incorrect functioning of the air change process If correct updating of this parameter cannot be guaranteed it is preferable to select Not defined for the season Rotate the knob until the current season setting is selected which is shown in light wording on a dark background Press the knob and the current season setting flashes Rotate the knob to select a new season Press the knob to confirm the selection made and the season is shown in light wording on a dark background Configuring automatic regulation of the fan speeds Four comfort profiles are available clean air clean air clean air and super clean air The first uses less energy while the last provides maximum comfort Rotate the knob until2. a detailed graphic representation of the machine s status and from here all the available functions can be activated To pass from the simplified window to the synoptic window hold the knob down for 5 seconds To access the synoptic window from any other window close all the windows Only if several machines are installed the status of the first machine only is displayed but an alarm indication will appear when any of the machines is in alarm Synoptic Window External temperature Fan speed setting Humidity involved Bypass Timer icon Post Heating coils Expulsion fan Expulsion temperature Immission Fan Temperature set Changing the speed on the fans Rotate the knob until the current speed is selected which is shown in light wording on a dark background Press the knob and the current speed flashes Rotate the knob to change the speed Press the knob to confirm the change made and the speed is shown in light wording on a dark background When chrono is selected the speed is automatically selected according to the weekly programme whereas when auto is selected the speed is selected automatically depending on the quality of the air extractor and the comfort profile configuration Timer Booster function Rotate the knob until the Timer icon is selected which will appear on a dark background Press the knob and the timer setting will flash Rotate the knob if you want to set a va
3. purchase invoice For the guarantee period the manufacturer will repair any defects resulting from fabrication errors or material faults free of charge At their discretion they may replace the defective parts or the entire apparatus Any other call for works under guarantee is excluded The manufacturer also does not accept any responsibility for damages caused The material deemed to be faulty must be returned to the manufacturer via the dealer along with a detailed description of the defect provided by the dealer The cost of delivery of the goods is for the client s account The return of the repaired goods shall be for the manufacturer s account Under no circumstances will the manufacturer react for defects caused by improper use that does not conform to the user manual supplied or by natural events such as lightning earth tremors fire etc They also do not accept any responsibility for repairs or modifications made to the equipment by personnel that do not work for the manufacturer ATC
4. the set profile is selected which is shown in light wording on a dark background Press the knob and the current configured profile flashes Rotate the knob to change the profile Press the knob to confirm the configuration and the profile required is shown in light wording on a dark background Go back to the Menu Window To access the menu window use the close icon Rotate the knob until the icon is selected which will appear on a dark background Press the knob to confirm the selection made the menu window opens Installation Installation is to be done by specialist personnel Location For optimum performance the unit must be fixed to an inside wall about 1 5 m above floor level away from heat sources such as heaters cooker tops etc and where it is not exposed to direct sunlight It must not be installed near doors where it can be struck by them which will ruin the electronics Wiring Connect the power supply to the and terminals respecting the correct polarity Connect the BUS to the terminal marked s Connect using a screened 2 x 0 35 mr cable via G S 24V internal terminals with a maximum length of 100m Characteristics Power Supply 9 30 Vdc 250mW Maximum working temperature 0 50 C Maximum storage temperature 20 70 C Guarantee Conditions The 2 year 24 month guarantee period starts from when the equipment is received The date of receipt must be checked in the
5. will appear in light letters on a dark background press the knob to confirm the selection the menu window will appear Preset Program The preset program is as follows Fan speed low is to be taken as switched off Fan speed medium or high is to be taken as being selected according to the quality of the air and the comfort profile chosen Working days Monday to Friday From 00 00 to 06 30 Medium fan speed post heating off From 06 30 to 08 00 Medium fan speed post heating on From 08 00 to 11 30 Low fan speed post heating on From 11 30 to 13 00 High fan speed post heating on From 13 00 to 18 00 Low fan speed post heating on From 18 00 to 22 00 High fan speed post heating on From 22 00 to 24 00 Medium fan speed post heating off Non working days Saturday and Sunday From 00 00 to 06 30 Medium fan speed post heating off From 06 30 to 08 00 Medium fan speed post heating on From 08 00 to 11 30 Medium fan speed post heating on From 11 30 to 13 00 High fan speed post heating on From 13 00 to 18 00 Medium fan speed post heating on From 18 00 to 22 00 High fan speed post heating on From 22 00 to 24 00 Medium fan speed post heating off Editing the preset program Select the Program item from the selection menu to access the program window from where the user can edit the preset weekly programme Menu Program Program Time table Low speed Medi
6. CTR 07 Microprocessor control User s Manual INTRODUCTION ccccccccececsessstecececsesseaeteceesesesseeeceesesseaeeeees 1 SIMPLIFIED DISPLAY cccccccecsessseeceecsesseeseceeeceeseanseeeeceeees 1 Simplified Window ccececcecessceseesesseeseeseesetseenecnseeeeneeeeees 1 SYNOPTIC DISPLAY ccscsccccesssececesceeessneeeesssaeeecsesaeeseneeeenses 2 Synoptic Window ccscceccecessceseeseesecseeseesecseeaecneeeeenaeeeeees 2 SELECTION MENU ccssssccecesssecesseeeeecsseceesssaeeecesaeeeseeeeenees 2 Menu cascine kresen tyelssdharsba syed a erara eies 2 PRESET PROGRAM ccccccsssssceseesceessseeecsssaeeecseceecesaeeeeseaaeees 3 EDITING THE PRESET PROGRAM ccccccccceceessessceceeesenssaeeeeecs 3 Menu Program 3 Menu Program Timetable 4 Menu Program Timetable Day Changes 0000 4 Menu Program Timetable Day Changes Change 4 Menu Program Timetable Day Changes Copy Day 5 CONFIGURING THE CLOCK cccccccecessesseceeeeceessaeeeeseeesenseaees 5 Mend ClO Chess vecs vised oes accuecbx foots Eee R rE 5 ALARMS oireena e E EE E E E OEE NEES 5 Menu Alarm 20 02 ccc cece ccccccccccccceeceteceteceseceteeeeessteneseneees 5 FACTORY CONFIGURATION ssssesesesesssesererererererererererererere 6 Menu FACtOTY eeeeeereserereererrrrrssen 6 USER PARAMETERS cccceseeeeeeeesesesssscssssesssssssssssesnrseneeenees 6 Menu PAVAMECtOLS ccc ccc cece cece cecececeeeevecesecese
7. ceteceteeeceneees 6 INSTALLATION cccsssssssssssssssssssnssssssssssssssnsssscseeeueeeueneuenees 6 Location voce eececceccccccccsseesecececccscusuaeceeccssceuseaseseececessuauaeesees 6 Wirinia orae e E TE ERT 6 CHARACTERISTICS i 6535552 5cececesuceavaddens ceavsevadeccscessesoeeodeeereeoss 6 GUARANTEE CONDITIONS cccsesesssssesesesssssesssessssstsessseseees 7 Contents Introduction This Control Panel is designed to control machines used to change the air in the simplest way possible The user activates the air change functions by means of a knob and looking at the graphic display that shows the pertinent windows Rotating the knob makes it possible to change the values and scroll the menu items while pressing it confirms the changes or selections made The icon for closing the window is always displayed at the top right of the screen To move to the next window rotate the knob until this icon is reached and then press the knob The operating status of the entire air change plant is summarised in the window that is normally displayed and the user has a choice of a simplified version or a complete overview of the machine Simplified display The simplified display provides a basic representation of the machine s status indicated by means of large symbols and characters that are even visible from a distance Only if several machines are installed the status of the first machine only is displayed but an alarm indication wil
8. e the required day Press the knob to confirm the configuration and the day is shown in light wording on a dark background Configuring the time Rotate the knob until the Hours item is selected which is shown in light wording on a dark background Press the knob and the current time setting flashes Rotate the knob to set the required time Press the knob to confirm the setting made and the time is shown in light wording on a dark background Configuration of minutes Rotate the knob until the Minute item is selected which is shown in light wording on a dark background Press the knob and the minutes begin to flash Rotate the knob to configure the required minutes Press the knob to confirm the configuration and the minutes setting is shown in light wording on a dark background Go back to the Menu Window To access the menu window use the close icon Rotate the knob until the icon is selected which will appear on a dark background Press the knob to confirm the selection made the menu window opens Alarms When alarms are activated more detail can be obtained on the cause of the fault by opening the dedicated window The alarm window is accessed by selecting the Alarm item in the selection menu How to select the unit only required if several machines are installed turn the knob to select the unit the status of which you want to check the name of the unit will appear in light colour
9. ed letters on a dark background press the knob to confirm the selection the corresponding status window will appear Menu Alarm Alarm Communication Te external Tr return Tx expelled Filters Fans Communication OK indicates that communication between the board on the machine and the control panel is working properly KO indicates that there is a communication fault Te external OK indicates that the temperature sensor for the external air is working properly KO indicates that the sensor is faulty Tr return OK indicates that the temperature sensor for the return air is working properly KO indicates that the sensor is faulty Tx expelled OK indicates that the temperature sensor for the expelled air is working properly KO indicates that the sensor is faulty Filters OK indicates efficient filters KO indicates dirty filters Fans OK indicates that the fans are working properly KO indicates that the fans are faulty Go back to the Menu Window To access the menu window use the close icon Rotate the knob until the icon is selected which will appear on a dark background Press the knob to confirm the selection made the menu window opens Factory Configuration Expert technical personnel can effect detailed configuration of the functions using the control panel by accessing the Factory window from the selection menu This access is password protected Menu Factory Factory
10. ed day is selected which is shown in light wording on a dark background Press the knob to confirm the selection made the corresponding day changes window opens Go back to the Program Window To access the Program window use the close icon Rotate the knob until the icon is selected which will appear on a dark background Press the knob to confirm the selection made the program window opens Menu Program Timetable Day Changes Changes The user programs the changes in speed and post heating at preset times The first three letters after the time indicate the speed while on off indicates the post heating status Configuring a change Rotate the knob until the required change is selected which is shown in light wording on a dark background Press the knob to confirm the selection made the corresponding change window opens Copying changes from another day Rotate the knob until the Copy Day item is selected which is shown in light wording on a dark background Press the knob to confirm the selection made the corresponding copy day window opens Go back to the Timetable Window To access the timetable window use the close icon Rotate the knob until the icon is selected which will appear on a dark background Press the knob to confirm the selection made the timetable window opens Menu Program Timetable Day Changes Change Monday mr Change 2 Time 05 00 Fa
11. l appear when any of the machines is in alarm The user can access the simplified window at any time and from any window by simply holding the knob pushed down for 5 seconds Alternatively it can be accessed by selecting the Simplified item in the selection menu Simplified Window External temperature Alarms Fan speed activated set Close icon BEEEBBOOOOOOOO amp i 0 Temperature gat Post heating status Humidity involved Changing the speed on the fans Rotate the knob clockwise to increase the speed and anticlockwise to reduce it When Chrono is selected the speed is automatically selected according to the weekly programme whereas when Auto is selected the speed is selected automatically depending on the quality of the air extractor and the comfort profile configuration Changing the temperature setting Press the knob the temperature set starts to flash Rotate the knob to change the temperature setting Press the knob to stop the changing modem and the temperature setting stops flashing When Off is set post heating is kept switched off Alarms Activated When alarms are activated an icon is displayed along with flashing wording The wording may indicate dirty filters or suggest calling for assistance with more serious problems Switching to the Synoptic Window To pass to the synoptic window hold the knob down for 5 seconds ATC Synoptic Display The synoptic display provides
12. lue that differs by 5 minutes Press the knob to confirm the configuration set The timer starts to count down and the fans will run at 100 speed until the time expires Changing the temperature setting Rotate the knob until the Temperature icon is selected which will appear on a dark background Press the knob the temperature set starts to flash Rotate the knob to change the temperature setting Press the knob to confirm the change made The set temperature stops flashing When off is set post heating is kept switched off Alarms Activated When alarms are activated an icon is displayed along with flashing wording The wording may indicate dirty filters or suggest calling for assistance with more serious problems Change Window Use the Close icon to access the other windows Rotate the knob until the icon is selected which will appear on a dark background Press the knob to confirm the selection made this will take you to the menu window Selection Menu To access detailed system information select the items in the menu From the synoptic window use the close icon to access the menu window Rotate the knob until the icon is selected which will appear on a dark background Press the knob to confirm the selection made this will take you to the menu window Menu Menu Program Clock Alarms Simplified Factory Parameters Selecting an item in the menu Rotate the knob un
13. n speed medium Post heating on Selecting a change Rotate the knob until the required Change item is selected which is shown in light wording on a dark background Press the knob and the change selected flashes Rotate the knob to select a new change Press the knob to confirm the change made and the change is shown in light wording on a dark background Configuring the time Rotate the knob until the Time item is selected which is shown in light wording on a dark background Press the knob and the time setting flashes Rotate the knob to set the required time Press the knob to confirm the setting made and the time is shown in light wording on a dark background Selecting the speed on the fans Rotate the knob until the Fan Speed item is selected which is shown in light wording on a dark background Press the knob and the current speed setting flashes Rotate the knob to select the new speed setting among the three possibilities low medium and high Press the knob to confirm the setting made and the speed setting is shown in light wording on a dark background Enabling post heating Rotate the knob until the Post Heating item is selected which is shown in light wording on a dark background Press the knob and the current enabling flashes Rotate the knob to enable or disable post heating Press the knob to confirm the enabling and this is shown in light wording on a dark backgro
14. til the required item is selected which is shown in light wording on a dark background Press the knob to confirm the selection made the corresponding new window opens Go back to the Synoptic Window To access the synoptic window use the close icon Rotate the knob until the icon is selected which will appear on a dark background Press the knob to confirm the selection made the synoptic window opens Operating status How to select the unit only required if several machines are installed turn the knob to select the unit the status of which you want to check the name of the unit will appear in light coloured letters on a dark background press the knob to confirm the selection the corresponding status window will appear Menu State State Te exter Tr return Tx expel Fan supply Fan exhau Humidity Te exter External temperature Tr return Recirculated air temperature Tx expelled Expelled air temperature Fan supply Intake fan state Fan exhau Exhaust fan state Humidity Humidity is present Bypass Bypass working Heat 1 The first post heating stage is working Heat 2 The second post heating stage is working CO2 VOC ppm Amount of air values less than 700 ppm indicated clean air while values close to 2000 ppm indicate very dirty air Back to main window The main window is accessed by means of the close icon turn the knob to select the icon this
15. um speed High speed Speed Settings The program provides three speed settings low medium and high speed The user uses the program to set the times at which the speed changes from one setting to another see Menu Program Timetable In the example the low speed is to be taken as the fans being off medium as the fans at 40 and high as the fans at 65 Selecting timetables Rotate the knob until timetable is selected which is shown in light wording on a dark background Press the knob to confirm the selection made the timetable window opens Configuring a set speed Rotate the knob until the required speed is selected which is shown in light wording on a dark background Press the knob and the current value flashes Rotate the knob to set the required speed Press the knob to confirm the setting made and the speed is shown in light wording on a dark background Go back to the Menu Window To access the menu window use the close icon Rotate the knob until the icon is selected which will appear on a dark background Press the knob to confirm the selection made the menu window opens Menu Program Timetable Time table aL Graphic Representation The programmes for all seven days of the week are represented graphically Each bar represents a time of the day and the height of the bar indicates the three speeds Selecting the daily programme Rotate the knob until the requir
16. und Post heating is always disabled when the fans are switched off Graphic representation of the program The graphic representation of the daily program selected is updated each time changes are made Go back to the Day Change Window To access the day change window use the close icon Rotate the knob until the icon is selected which will appear on a dark background Press the knob to confirm the selection made the day changes window opens Menu Program Timetable Day Changes Copy Day Copy day Monday Tuesday Wednesday Thursday Friday Saturday Selecting changes to be copied Rotate the knob until the day that has the changes to copy is selected which is shown in light wording on a dark background Press the knob to confirm the selection made the updated day changes window is displayed Go back to the Day Change Window To access the day change window use the close icon Rotate the knob until the icon is selected which will appear on a dark background Press the knob to confirm the selection made the day changes window opens Configuring the Clock Select the Clock item from the menu to access the clock window Menu Clock Clock Day Hours Minutes Configuring the day Rotate the knob until the Day item is selected which is shown in light wording on a dark background Press the knob and the current configured day flashes Rotate the knob to configur
Download Pdf Manuals
Related Search