UriveGreen User`s Manual
Contents
1. Playback list generation and SD card formatting M times playback rate control Volume control 33 Environment setting Connect the SD card which stores the videos of the black box to a computer and push the SD card shaped button at the lower part When the playback list comes up push the Confirm button to execute Then the environment setting will be activated making it possible to select among individual items Block box sotup Basic settings Continuous mode shock level Medium Impact setup Parking mode shock level Medium Cut off voltage 11 9 V Driving impact Parking impact Discharge protection Parking mode memory usage 50 Cut off voltage Parking mode motion sensitivity level Parking mode M Memory for parking mode Medium Sensitivity at parking made k Continuous mode video quality High Video quality Driving made Parking made Parking mode video quality High I Ta ET 4 Er on D o Lr ET 3 ae um 4 4 4 Audio recording Enabled Audio record eo Voice announcement Enabled Voice eO PIP mode Enabled PIP eoo Reverse rear of a Rear video shift Disabled Time setup Black box time setup 2013 02 20 19 05 22 i Standard time zone GMT 09 00 Osaka Sapporo Seoul Tokyo Yakutsk 34 1 Continuous mode shock level setting Selects among the high medium and low levels can be set from the term2. 14 11 Playback on the LCD screen diis ORDING MUTE GPS TT ma en uj RUT ei m nig UE 2012 11 25 08 42 01 V ER 1 0 Recording state Shows the current state related to recording RECORDING recording while driving EVENT event recording Audio recording state and GPS reception state When the audio recording is not activated MUTE will be displayed When the GPS signal is received GPS will be displayed When the audio recording is activated and no GPS signal is received nothing will be displayed GPS will be displayed only when the GPS module which is an option is connected Recording time Year Month Day Hour Minute Second Version Shows the current version of the firmware Shows the current video that is being recorded by the camera in real time The front and rear videos can be checked at the same time by using the PIP function Touching the small screen on the top right will cause a shift between the front and the rear PIP screens 1S 12 Menu While the screen is in the recording mode touching it will shift the screen to the menu screen recording continues 1 Front camera Shows the front video in real time If the PIP function is activated the front video will be shown in large size and the rear video will be shown in small size 2 Rear camera Shows the rear video in real time If the PIP function is activated the rear video will be shown in large size and the f
3. files of shocks events detected while parked 5 Pushing the previous button will start the recording again 18 15 Viewing the list of recorded videos 2012 12 01 2012 12 01 2012 12 01 2012 12 01 09 26 00 1 Recording mode Continuous recording files shock event recording files and files of motion event detection while parked are listed up and displayed separately 2 Front and rear videos The front and rear videos are to be listed up and displayed separately 3 Previous menu Shifts to the recording view menu 4 Recording start Ends the recording view function and restarts the recording 5 File list Arranges and shows the files of recorded videos in sequence starting with the recent recorded ones 6 Previous page next page Shifts to a different page of the list 7 Number of pages Shows the current page of the displayed list 19 16 Playback of the recorded video 2 3 Playback file 2 9 number 1 Screen for playing back recorded videos 2 Shows the playback time playback time total time of the stored file 3 File number The number of the file that is played back currently and the total number of stored files 4 Playback end Shifts to the file list 20 17 Environment setting 1 System setting Sets the shock sensitivity the battery cut off voltage the storage ratio of the files of recording while parked and the time 2 Screen setting Sets the PI
4. into a PC Store the firmware file into the micro SD card Place the firmware file at the top position of the folder Firmware file name Smart E3500 app bin omart E3500 boot bin Smart E3500 memlnfo bin ic Contig icy Marmal Smart E3BID app bin Smart E3BID boot bin Smart E3500 memlnfo bin Insert the SD card into the main body after the power for the black box is turned off Supply power to the black box As shown below a phrase for notifying that firmware update is in progress will be displayed and the announcement Updating starts will be made at the same time when updating starts After a short while the announcement Updating is completed will be made and then the black box will restart automatically Firmware updating is in progress Do not turn off the power Will start again when completed When the black box is restarted folders will be created in the formatted memory card automatically However once a phrase that says the file is wrong the booting process repeats itself it is required to store the firmware file in the micro SD card again and progress the updating again Wrong firmware file Please copy again 32 2 PC viewer Functions of the viewer buttons Rear View Front View MW nh tW Qo y Ls E D Viewer firmware update Black box setting Print Capture Minimize end Map on off Full screen 8 Speed acceleration graphs
5. next chapter for the installation of the rear camera 12 Caution It is recommended that the installation of the black box and the wiring of the continuous power cable should be carried out at a shop that specializes in installing black boxes 1 Remove the dual side tape of the stand and attach 2 Connect the rear camera and the extension cable T Connect the extension cable to the CAM socket of the and fix it on the rear window clean the attachment main body of the terminal surface first 3 Turn on the power of the main body of the terminal 4 Adjust the angle of the front camera while checking then check the video from the rear camera through the the LCD screen LCD screen 5 Once the rear camera is completely installed arrange the extension cable and wires 13 10 Screen setting When the power is turned on the start screen will be displayed The firmware version will be shown at the bottom right side gt a aVV pm yT Y E AV p SMARTA SMAR b i S 4 Version 1 0 Version 1 0 _ AM m SMART i Start screen SMARTHD Start screen t Must operate it after stopping the vehicle for the safe driving Warning image After a short while a warning image will be displayed and then a voice announcing recording starts will follow The videos from the front and rear cameras will be displayed on the LCD screen at the same time thanks to the PIP function
6. 7G 2013 02 13 17 43 10 1 By click the front or rear screen during playback will bring up a red colored screen enlargement box on the screen 2 Scrolling the mouse wheel forward or backward will enlarge or reduce the screen o Moving the mouse while clicking it on the screen will move the box onto the target part of the Screen 39 Storage assignment in relation to assignment for parking Unit MB ele Tu Event while ent for Capacity Continuous Event parked parking 50 16 GB 6 296 1 000 6796 32 GB 1 092 1 500 14 092 ae ww of fe xe re sel of o 40 Connect the SD card that contains the recording to a PC The continuous recording files are generated every 1 minute and the event files the files for parking the files for the events while parked are to be generated every 20 seconds There are a total of five folders and explanation about them are shown below 1 Normal Continuous LJ Config Event Event LJ Normal Parking Event Shock while parked Config Environment setting LJ ParkingEvent Parking Motion while parked Parking C ETO o File name Mq 20 201 p N9 1 Date Year Month Day 2 Time Hour Minute Second 3 Modes I Videos of continuous recording E Videos of event and manual recordings P Videos of motions detected while parked PE Videos of event recording 4 1 1 channel for the front side 2 two channels for the front and rear sides 5 Extension nam
7. D card is inserted correctly before turning on the power Take precautions not to install the product at a location that will disturb the user s view Keep the windshield and rear window where the product is installed in clean state Otherwise the quality of the screen may be degraded When a rear camera is attached onto the rear window it would be impossible to record videos with desired quality because the window is tinted or lined with heat wires Users need to pay attention to this when installing the black box Once the system is installed users need to remove the protective vinyl cover on the camera lens before using the system 11 Caution It is recommended that the installation of the black box and the wiring of the continuous power cable should be carried out at a shop that specializes in installing black boxes SMARTHD SMART t 1 Remove the dual side tape of the stand and attach 2 The cables for the continuous power can be differentiated as below Black wire Ground Yellow wire BAT B Red wire ACC and fix it on the windshield clean the attachment surface first 3 When the power cables are installed completely 4 Adjust the angle of the front camera while checking the LCD screen connect the power to the terminal and check the if product functioning properly 5 When installing the rear camera connect it while the power of the terminal is turned off Refer to the
8. D card is purchased additionally and is to be used for the first time it must be formatted before the use The device can be set easily by suing the LCD menu Considering that the temperature inside a car will go up drastically when the car is parked for long hours during summer it is required to park the car with its rear side facing the sun in order to avoid to direct sunlight or in an shaded area which will help prevent the black box from malfunctioning Do not operate the terminal in the middle of activating Park the car first in a stable location and then operate the terminal Do not touch the SD card or the terminal with oily and wet hands Do not push foreign substances into the terminal card inlet When required to clean the car or the terminal soft and dry cloth should be used for cleaning not water or volatile chemicals If the attachment location of the product is changed the angle of the camera may be changed also It is needed to adjust the angle of the camera after attaching the product and check the recording If there are problems with the product or the SD card they should not be left attended It is required to contact us for the A S services or send them to us in order to get the problems resolved Avoid strong shocks onto the terminal The terminal would be damaged or malfunction due to the shock Even when the product runs normally upon initial installation it may not work normally when the location is changed Th
9. Liability Compensation Insurance by Samsung Fire amp Marine Insurance User Manual Users must read and understand the user manual before using the product to ensure user safety and for proper product use 20 21 22 23 24 Before using the product 2 Precautions 3 Features 6 Introduction 7 Components 8 Specifications 9 Precautions for installation 10 Installation method front 11 Installation method rear 12 Screen setting 13 Playback on the LCD screen 14 Menu 14 Time view 15 Recording view 15 Viewing of the list of recorded videos 16 Playback of the recorded video 16 Environment setting 17 System setting 17 Time setting 18 Video screen setting 18 Audio setting 19 SD card formatting at the terminal 19 Notice for formatting 20 Touch area correction 20 25 26 27 28 29 30 31 32 33 34 35 Operation of the product Firmware updating PC viewer Black box environment setting Playback list generation SD card formatting Full screen view Screen enlargement 21 22 25 26 27 28 29 30 Storage capacity comparison among memory cards Storage folders and file name Warranty certificate 30 31 32 Users must read and understand the user manual before using the product to ensure user safety and for proper product use The components of the product and the content of the user manual may c
10. P function the LCD screen the touch area correction and the rear video shift 3 Audio setting Sets the audio recording and the voice announcement 4 SD card formatting Formats the SD card internally 5 Pushing the previous button will start the recording again 21 18 System setting 1 Shock sensitivity setting Sets the shock sensitivity that will be applied while driving three stages high medium and low 2 Battery cut off voltage setting Selects among the cut off voltages four stages 11 5 V 11 7 V 11 9 V and 12 1 V and cut off time four stages 5 hours 10 hours 24 hours and 48 hours 3 Ratio for the recording while parked Selects the ratio for the recording while parked 0 25 and 50 4 Time setting Sets the time for the black box directly 5 Pushing the previous button will shift the screen to the menu screen 22 19 Time setting o pn ace le ie E second ppp iis D120 11 09 30 45 rer adjad 1 Selects the year month day hour minute and second by using the shift button 2 Pushing the previous button will save the time as set and shift the screen to the system setting menu 3 Pushing the home button will save the time as set and end the menu mode and start the recording 4 Ifthe external GPS unit an option is purchased separately and connected the time will be set automatically according to the GPS time when the GPS signal is received 29 20 Video sc
11. black box time by applying the time of a PC 12 Time setting for individual countries Jo Create the play list 5D Format P SO Path b TYPE Date Time Type Path 2015 02 13 1437035 Driving Ft Normal lt mar 201302131737351 avi 2013 02 15 16346 Event Fm Eventi mdr 20130213 1 73145 E1 a i 2015 02 13 17 38 06 Driving FatNormalt 0t mar 20130213 1 750611 avi 2015 02 13 1439 07 Driving Ft Normal it dr 20130213 1 73307 11 avi 2015 02 13 17 40 08 Driving Ft Normale mar 20130213 1 P4018 11 avi 2013 02 13 17 41 08 Driving FW Normal lt mar 20130213 1 4108 11 avi 2013 02 13 17 42 08 Driving Pat Normal Olt mdr 201 s0213_1 4209_l1 avi 2013 02 13 17 43 00 Driving Pat Normal ltt mdr 201 302131743101 avi Take out the ard from the black box and connect to a computer Pushing the utton at the viewer main screen will make it possible to search through all the videos recorded in the SD card by the black box and show the playback list Tabs of the playback list Selects the location and the types of videos SD location Selects the location of the SD card that stores videos Video type Selects the types of videos for the playback Type All continuous file event file parking files and parking event file Confirm Brings the data selected from the playback list to the file list window of the main screen and Starts the playback of the file Cancel Ends the window of the playback list window 36 Formatting t
12. d 5 If there is a problem with the SD card a message will be displayed 26 23 Notice for formatting The SD card can be used stably for a longer period when formatting it once every two weeks recommended The terminal provides a notification function for formatting at the right time to do so Format the SD card Environment setting SD card formatting Format it through the menu Confirm Cancel 1 Until the card is formatted a notice will be generated every time the vehicle is started 2 24 Touch area correction This function is for correcting the coordinates for the touch area of the LCD screen The function can be executed by pushing the touch area correction icon on the video screen setting menu Push the center of the cross mark while following it 1 Touch correctly and sequentially the points that would be indicated by the mark on the LCD screen 2 When the correction of the coordinates is completed move to the video screen setting menu x When the products is shipped from the factory the coordinates are adjusted before the shipment 28 Operation LED is turned on blue while booting up Ding dong recording Power on Boot up the terminal LED blinks blue every 1 second while recording LED blinks blue while updating When updating ends LED is turned off and will be turned back on when the system restarts Update using
13. d regulations for intellectual property management for illegal copying processing and distribution The product may be changed for the purpose of improving its performance without prior notice Updating for the product may vary depending on the company s policy If there is a change in the related policy notification will be made through the home page 1280X720p HD The front unit provides 1280X720p HD high resolution real HD videos The rear unit provides 640X480 VGA videos Supports 3 5 inch wide LCD touch screen 16 9 PIP function screen split LCD equipment for checking the videos and setting the functions of the terminal The videos from the front and rear units are to be split and displayed on the screen at the same time PIP The SD card possible to format it internally The SD card makes it easy to check the recorded video Recorded videos will be deleted sequentially through its overwrite function starting with the older ones in individual folders A function for formatting the black box internally is provided to prepare for the malfunctioning of the SD card or for stably storing the videos in the memory Easy to set the environment Possible to set the environment of the black box directly through the LCD touch screen Continuous recording event recording Continuous recording every 1 minute Event recording During the continuous recording the 20 second video of an event taken
14. e avi H 264 video file 41 Product Smart i Smart HD o Model l 3000 Smart HD Serial No l 3500 Smart i Date purchased Customer name B Purchased at B We would like to thank you for purchasing the Smart i HD a black box for cars The company provides a warranty certificate for the product according to the regulations related to the compensation for the damage or loss that could occur to customers Please contact the agency or the selling shop when there is a problem with the product The warranty period is 1 year from the date of purchased o f the date of purchase cannot be identified the warranty period will be calculated one month after the manufacture date of the product Please make sure that the date of purchase is filled out in the warranty form o Warranty services will not be available in cases where the product malfunctions due to mishandling by users high voltage or natural disasters rains lightning and force majeure The product can be refunded or replaced with a new one within 14 days from receipt of the product o f refund is needed please return the product to the shop without opening up the package Once opened and used the product will not be refunded o The cost of returning the product will be handled by the customer Except for refund due to product defect The product is for a car If it is used for other purposes free A S services will not be p
15. e product should be fixed firmly when installed Once it is installed do not move it by force or apply shock onto it Should use only an authentic SD card MLC type and Class 6 or higher is recommended When an unauthentic SD card is used loss of data and failure of the product could happen making it impossible to receive normal AS services The SD card is expendable and needs to be checked periodically As it gets worn after being used for a certain period of time its memory can get damaged partially making it impossible for the recording process to take place The recording needs to be checked as necessary and the card needs to be formatted periodically once a week If the card cannot be used normally it needs to be replaced with new one recommended every six months In case of important data they must be backed up and stored in an additional storage medium Do not remove the SD card or turn off the power or the ignition while upgrading firmware Otherwise the product or the SD card would malfunction or loss of data would occur When required to remove the SD card from the product the power button on the left side must be first turned off If the SD card is removed while the power is on the stored data could be damaged or lost and possibly cause the product to malfunction All the rights to the software and hardware related to the product belongs to the company Criminal punishment will be applied according to the laws an
16. eted after format WE Select OK for disk format or CANCEL Format completed Z Pushing the front rear full screen button at the center of the PC viewer will shift the screen to a full screen 2013 02 13 2013 02 13 2013 02 13 2013 02 13 2013 02 13 2013 02 13 2013 02 13 17 37 46 17 38 06 17 39 07 17 40 08 17 41 08 17 42 09 17 43 10 RUM Nn RRND 2012 11 25 00 42 01 Ti Event Driving Driving Driving Driving Driving Driving Piy J o ERE gt 1L v ood Kt eer QT Full screen mode Pushing the Front full screen or Rear full screen button will change the screen mode to the full screen mode Back to main screen Pushing the Initial screen button will shift the screen from the current full screen mode back to the main screen mode Full screen Plays back the video in a maximized size according to the resolution of the monitor Pushing the End button on the full screen will end the viewer program immediately without shifting to the main screen 38 32 Screen enlargement By clicking the screen during playback will bring up a red colored screen enlargement box at the bottom left of the screen It can be brought up while playing back in full screen 7 miti j 5 HH I Time 2013 02 13 17 37 46 2013 02 13 17 38 06 2013 02 13 17 39 07 ivi me 5 2013 02 13 17 40 08 ivi Y 0 0196 2013 02 13 17 41 08 ivi 2013 02 13 17 42 09 ivi Z 0 00
17. from 5 seconds before the shock to 15 seconds after it will be recorded separately The recorded files are dated based on year month day and hour to make it easy to look for a video Recording while parked event recording while parked Recording while parked While in the parking mode when the camera sensor detects a motion the 20 second video taken from 5 seconds before the event to 15 seconds after it will be recorded as a recording file created while parked Event recording while parked While in the parking mode when a shock is detected the 20 second video taken from 5 seconds before the event to 15 seconds after it will be recorded as an event recording file created while parked Supports the cut off function as a measure against electrical discharging As a measure against electrical discharging the product supports a function for setting a cut off voltage or time timer Supports voice announcement LCD auto off When the device shifts to the parking mode the LCD screen will automatically be turned off External GPS optional A PC viewer allows the video as well as the time location speed and directions to be checked 4 Introduction GPS module Power cable connection External connection camera action Top view LED shows the activated state SD insertion Speaker part Power switch Camera Front view Side view 3 5 inch LCD Rear view Users need to check
18. hange without a prior notice for the purpose of improving user convenience and product performance Users are required to refer to the home page for relevant information The company will not be held responsible for problems that might occur in using the product without following the instructions in the user manual The company will not be held responsible for failure of the product loss of data and other losses that might occur while using the product Users need to continuously manage and pay attention to the micro SD card which is the storage medium of this product lt is not guaranteed that this product records all accidents No event recording will occur if there is insignificant shock that would not activate the shock sensor If the product malfunctions due to a car accident or an external shock the company will not be held responsible for any loss that could result from loss of recordings The product is for assisting in safe driving The manufacturer will not take any responsibilities related to accidents Only regulated voltage should be used for the product Otherwise the product would malfunction which could result to fire incidents Do not disassemble and modify the product arbitrarily Otherwise the product would malfunction and electrocution could happen If the product needs maintenance work in the above case it would be treated as a user error If repair is needed contact our service center to get our A S ma
19. hrough the PC viewer Before formatting the SD card users must copy important files into other storage media When pushing the S button at the viewer main screen and selecting the Disk format tab the SD card will be formatted Check whether the formatting drive is the one in which the SD card is connected to currently Pushing the format start button will bring up the SD card format window The window will show file size file system type current assignment unit and postformatting assignment unit The name of the SD card will be described as SMART HD automatically Pushing the start button will start the formatting Quick formatting will be selected basically General formatting may take longer hours depending on the specifications of PCs which requires you to pay attention Caution When formatting the SD card in a PC by applying the general formatting method users need to select FAT32 at File system and 32 KB at Assignment unit size When formatting is completed a window will come up for notifying about the completion Push the confirm button and the close button to complete the process of formatting the SD card Disk format FAY Disk format FA Capacity Capacity File system File system Current allocation unit Current allocation unit Allocation unit after format 3 Allocation unit after format Disk label Disk label Quick format Warning All data will be del
20. inal 2 Parking mode shock level setting Selects among the high medium and low levels 3 Cut off voltage setting Selects between cut off voltage and cut off time can be set from the terminal Four stages of the cut off voltage 11 5 V 11 7 V 11 9 V and 12 1 V Four stages of the cut off time 5 hours 10 hours 24 hours and 48 hours However when the cut off time is selected the parking mode will end regardless of the cut off time if the working voltage goes below 11 5 V before reaching the cut off time 4 Parking mode memory usage selection Selects among 50 25 and 0 can be set from the terminal However when the parking mode memory usage increases the memory to be used for the continuous mode will decrease 5 Parking mode motion sensitivity level Selects among the high medium and low levels 6 Continuous mode video quality Parking mode video quality Selects between high and low levels However when the video is recorded in high quality the storage time will be shortened 7 Audio recording Sets whether to use the audio recording can be set from the terminal 8 Voice announcement Sets whether to use the voice announcement can be set from the terminal 9 PIP mode Sets whether to use the PIP function can be set from the terminal 10 Rear video shift Sets whether to shift the rear video to the left side or to the right side can be set from the terminal 11 Black box time setting Changes the
21. intenance work Take precaution not to cut or damage the power cable of the terminal when attaching other electronics products inside a car Otherwise the product would malfunction that may result to electrocution and fire incidents Before removing or inserting the micro SD card hereinafter the SD card the power must be switched off or the power jack must be removed which will turn LED off The card then can be separated for checking the data If the SD card is separated by force the product could be damaged Users should take precautions If the SD card is separated while the product is running problems would occur in data storage and the SD card would be damaged While in storage or being transported the data could be damaged due to static electricity and external voltage It should be kept in a card case Avoid using and placing it in an environment where temperature and humidity are high and corrosion could be caused Critical data must be kept in other storage units HDDs CDs and mobile disks In order to check whether the product runs normally the stored data should be checked more than once a week and the SD card should be formatted more than twice a month As the SD card has a certain life span problems could occur to the card itself if used for long which could make it impossible to store the data normally It is required to check the SD card and purchase an additional SC card if necessary Xx When formatti
22. n of the firmware once formatted 6 When the formatting is completed the updated file will be copied onto the memory card automatically File name Smart E3500 app bin Smart E3500 boot bin Smart E3500 memlnfo bin ic Contig icy Normal A omart E390 app bin Smart E3500_boot bin Smart E350 mermlnfo bin 30 Update through a PC viewer T 8 10 Insert the SD card into the main body after the power for the black box is turned off Supply power to the black box As shown below a notification message that the firmware update is in progress will be displayed and the announcement Updating starts will be made at the same time when the updating starts After a short while the announcement Updating is completed will be made and then the black box will be restarted automatically Firmware updating is in progress Do not turn off the power Will start again when completed When the black box gets restarted folders will be created in the formatted memory card automatically However once a phrase that says the file is wrong the booting process repeats itself it is required to store the firmware file in the micro SD card again and start the update again Wrong firmware file Please copy again 31 Download the updated firmware from the home page ile on Download the updated firmware file from the reference room of the home page of Innotek Korea http www smartO01 com
23. ng and inserting the SD card into the product a folder will be generated automatically making it possible to record and store videos When the main body power switch is turned off or the power jack is removed the power for the main body will be turned off When required to insert or separate the SD card the main body power needs to be turned off and the follow the procedures shown below x Removing the SD card 1 Turn off the product s main body power switch 2 Check whether all the LEDs are turned off 3 Remove the SD card after the LEDs are turned off completely The product would malfunction if the SD card is removed by force Gently pushing it once would release it However it is still required to pay attention to the SD card as it could bounce off when trying to remove it x Inserting the SD card 1 Insert the SD card into the SD card portal of the black box main body 2 Connect the power jack to the black box main body and turn on the power switch x The power switch must be turned off or the power jack must be removed before inserting or removing the SD card Using the product The following instructions should be observed in order to prevent the product and the micro SD card from malfunctioning and to prevent fires from taking place When the product is to be used for the first time after the package is opened the SD card needs to be connected to a PC and to be formatted before being used x When an S
24. o SD card 8 32 GB cards can be used MLC type and class 6 or MLC type and class 6 or higher adic LED and speaker embedded Supports voice announcement Acceleration sensor sensor Three axis Three axis X Y and Z acceleration sensor Y and Z acceleration sensor ewm me EX a UN LN DC Power CAM Rear camera andGPS 00 CAM Rear camera and GPS Main body 96x62x17 5 mm Size weight MUMRURCA ENDS NR Stand not included Power Power consumption Upto4Wat2CH 00 to 4 W at 2 CH i i pem e Storing temperature temperature 40 C to 85 C Player Supports an exclusive viewer a 10 It is recommended that the installation of the black box and the wiring of the continuous power cable should be carried out at a shop that specializes in installing black boxes Install the device at an area with a flat surface The ignition must be turned off while installing Install the device in a safe and well lighted area The product requires wires to be buried Before completing the burial of wires for installation it is needed to supply the power and check whether the videos of the front and rear cameras are stored normally When required to install the rear camera it must be connected while the power cable is not connected to the black box All the components necessary for the installation are packaged inside the product box Check them before installing them Check first whether the S
25. reen setting 1 Sets whether to use the PIP function 2 LCD setting Selects between shifting to the clock screen after 1 minute and displaying the video continuously 3 Touch area correction Corrects the LCD screen touch area 4 Rear video shift Sets whether to shift the rear video between the left side and the right side 5 Pushing the previous button will shift the screen to the menu screen 24 21 Audio setting 1 Sets whether to use the audio recording 2 Sets whether to use the voice announcement 3 Pushing the previous button will shift the screen to the menu screen 29 22 SD card formatting at the terminal Pushing the SD Format icon on the environment setting screen will make it possible to format the SD card that is inserted into the terminal Formatting will delete all the stored data Do you want to continue Confirm Cancel Formatting in progress It will take a few seconds to complete Formatting is completed The system will start again A problem with the SD card is identified Try to format it again and then if formatting fails again contact the service center Confirm 1 Pushing the Confirm icon will start the formatting process 2 Pushing the Cancel icon will shift the screen to the environment setting screen 3 Do not remove the SD card while formatting 4 The system will be rebooted automatically when formatting is complete
26. ront video will be shown in small size 3 Screen off Turns off the LCD screen Touching any part of the LCD screen will shift it to the menu screen 4 Time view Shifts to the time screen 5 Recording view Shows the videos recorded in the continuous recording the shock recording the recording while parked and the shock recording while parked 6 Environment setting Sets the shock sensitivity the cut off voltage the storage ratio the time the PIP function the LCD operation the touch area compensation the rear video shift the audio recording the voice announcement and the SD card formatting 16 13 Time view 2012 12 01 AM 09 30 Status icons on the time view screen Deactivated during the continuous recording Activated during the event recording No audio recording mute on Audio recording mute off GPS reception rs JM No GPS reception on UM off x Pushing the event notice icon will make it possible to record an event manually Pushing the audio recording icon will make it possible to set whether to record the audio or not 17 14 Recording view NOC wh Shock recording while driving 1 Continuous recording while driving Shows the continuous recording files 2 Shock recording while driving Shows shock event recording files 3 Motion detection while parked Shows the files of motions detected while parked 4 mpact detection while parked Shows the
27. rovided o Supplier Innotek Korea Rm 302 235 4 Yuseon Bldg Yongdap dong Seongdong gu Seoul Contact for purchasing and queries 070 7780 5023 Manufactured by Nadatel in Korea Certificate No KCC REM IK1 1 3000 Certificate for Innotek Korea 42
28. the components after opening up the package refer to the following images If there is damage to or a problem with the product or the components users need to contact the selling shop for queries the following images may be different from the actual components Main Transparent Rear Extension body stand cable camera Continuous Product Dual power cable ogee side Manual car 16 GB tape x Options sold separately A cigar jack cable and an external GPS module The components may change in their specifications arbitrarily depending on the situations of supply of parts The images shown above are for user information it may be different from the actual components 9 6 Specifications Products Products models Smart i i Smart i 3500 Smart HD i 3000 Smart HD i 3000 of view 120 degree Front 2 million pixels Rear 0 3 million pixels based on the opposite angle RESO OE Font 1280x 720P Ip Rear 640 x 480 VGA io 5 inch LCD 480 x 320 wide touch panel Supports the PIP function the PIP function Continuous recording event recording recording while Recording methods i parked motion shock manual recording 1CH Up to 30 frames for the front camera video frame 2CH Up to 15 frames individually for the front and rear cameras when activated at the same time Storage method method Micro SD Micro SD card 8 32 GB cards can be used 8 32 GB cards can be Micr
29. the micro SD Updating starts card check the updating through the LCD screen Update Updating ends Monitoring on LED is turned on blue Individually both at the front and rear units totally 20 second video from 5 seconds before an incident to 15 seconds after it will be recorded and stored Parking mode Video storing by detecting a motion a shock Led blinks blue quickly The last video will be stored using the backup battery and then the set power is turned off Power off LED is turned off ohock detection Manual recording Ding dong Event 29 Update through a PC viewer 1 The updated file can be copied onto the memory card automatically through the PC viewer 2 Get the memory card formatted However it will be impossible to check the version of the firmware once formatted It is recommended to progress the updating after checking the version of the firmware 3 After getting the memory card formatted push the viewer Firmware Updating button at the top of the PC viewer main screen 4 Check the version of the firmware at the update manager window Check the storage location and push the Update button J Update manage Firmware update Current firmware version v1 0 4 Storage REMOVABLE DISK F Update PC viewer update Current PC viewer version v1 0 1 5 Get the memory card formatted it will be impossible to check the versio
Download Pdf Manuals
Related Search