Home

LED TV - SAMSUNG DISPLAY

1. Still image warning Avoid displaying still images such as jpeg picture files or still image elements such as TV channel logos panorama or 4 3 format images stock or news bars or crawls on the screen Displaying still pictures continually can cause uneven screen wear which will affect image quality To reduce the chance that this effect will occur please follow the recommendations below e Avoid displaying the same TV channel for long periods Always try to display a full screen image Reduce brightness and contrast to help prevent the occurrence of after images Use all TV features designed to reduce image retention and screen burn in Refer to the proper user manual section for details Ensuring Proper Ventilation When you install the TV maintain the distances shown below between the TV and other objects walls cabinet sides etc to ensure proper ventilation Failing to do so may result in a fire or problems with the TV caused by an increase in its internal temperature amp When using a stand or wall mount use parts provided by Samsung Electronics only lf you use parts provided by another manufacturer it may cause a problem with the product or cause the product to fall leading to serious injury Installation with a stand Installation with a wall mount cae fe ees fees Aa et Fee oes et ee ne oe A eE S ee ee tee 4 inches 4 inches 4 inches 4 inches 4 inches k Additional Info
2. SERIES E 890 LED IV Installation manual Thank you for purchasing Samsung product To receive more service please register your product at www samsung com register Model Serial No Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance Product design and specifications may be changed without notice Introduction This TV B2B Business to Business model is designed for hotels or the other hospitality businesses supports a variety of special functions and lets you limit some user guest controls Operational Modes This TV has two modes Interactive and Stand alone mode e Interactive mode In this mode the TV communicates with and is fully or partially controlled by a connected Set Back Box SBB or Set Top Box STB provided by a hospitality SI System Integration vendor When the TV is initially plugged in it sends a command that attempts to identify the SSB or STB connected to it If the TV identifies the SBB or STB and the SBB or STB identifies the TV the TV gives full control to the SBB or STB e Stand alone mode In this mode this TV works alone without an external SBB or the STB The TV has a Hotel Hospitality Menu that lets you easily set its various hospitality functions Please see pages 26 to 30 The Menu also lets you activate or de activate some TV and hospitality functions so you can create your optimal hospitality configuration
3. Si Oooo DIGITAL AUDIO OUT OPTICAL le CR TV Rear Panel Connect the DVI AUDIO IN port of the TV to the PC AUDIO port of the RUP Connect the COMPONENT AV IN 1 VIDEO R AUDIO L port of the TV to the RCA port of the RJP Connect the HDMI port of the TV to the HDMI port of the RUP Connect the EX LINK port of the TV to the RS 232 port of the RUP amp This Samsung TV is compatible with the TeleAdapt TA 7610 RJP only A O N a English 23 e RJP Remote Jack Pack The RUP is a hardware module that has various Audio and Video inputs A V Video A V Audio PC and HDMI and corresponding outputs The corresponding outputs are connected from the RJP to the TV The RJP communicates with the TV via RS232 The RJP communicates with the TV by sending messages regarding Active Inactive sources A group of hotel menu items let you assign numbered priorities to the jacks of the RJP See page 23 1 is the highest priority and 3 is the lowest When a guest connects external sources to the RUP jacks the TV will automatically switch between sources based on the priority you have assigned them in the Menu For example lets say AV is set to 1 and HDMI to 2 If a guest has attached a device to the HDMI jack and then plugs a device into the AV jack the TV automatically switches to the device plugged into the AV jack the jack with the higher priority Note that a guest can also switch between devices manually by pus
4. After power off amp on guests can use the TV i O 42 Engish El Channel Editor The Channel Editor lets you edit the channels stored in the TV s memory Using Channel Editor you can Change the channel numbers and names and sort the channels in your desired channel number order Apply the video mute to channels you select The video mute blanks out the video from a channel and outputs only the sound while displaying a speaker icon on the screen The Channel Editor also lets you view information about each channel easily without your having to display each channel directly Hospitality Mode Standalone Widget Solution SI Vendor OFF DRM Power On Service MyChannel Menu OSD Clock Music Mode External Source Bathroom Speaker Eco Solution Logo Message Cloning REACH Solution Network lt Depending on model and region some menu items may not exist gt General Steps for Using the Channel Editor in Stand alone Mode Step Broad Outline 1 Run Channel Auto Store in the Hotel Option Menu 2 Enter Channel Editor in the Hotel Option Menu 3 On a piece of paper compile a list of channels you want to have arranged in the order you want 4 Rearrange channels and edit channel names with the TOOLS Button based on the list you compiled Press the EXIT or RETURN Button to exit lt For a detailed explanation of how Channel Editor works see pages 43 through 46 gt Engish 43 The picture below
5. Using the Samsung Smart Control Motion Function to Operate the TV The Samsung Smart Control has a motion sensor gyro sensor that lets you control the TV easily by moving the Samsung Smart Control and using it much like a cordless mouse Place a finger on the Samsung Smart Control s touch pad and then move the Samsung Smart Control A pointer appears on the screen Move the Samsung Smart Control and pointer moves on the screen in the direction you moved the Samsung Smart Control and the same distance Highlight an item on the screen with the pointer and then press the touch pad to select it You can also move the Samsung Smart Control in the same fashion to scroll scrollable screens up and down If you stop using the Motion Function even momentarily put your finger on the touch pad and then move the Samsung Smart Control to re start the function 6 f ns Engish 13 Using the Touch Pad and the Directional Buttons Inthe TV s menu navigate to Support gt Smart Control Tutorial to view a tutorial that shows how to use the touch pad f the touch pad s sensitivity is too high or low navigate to the System gt Smart Control Settings menu and then select the Touch Sensitivity option to change the touch pad sensitivity Moving the Focus or Pointer Press the directional buttons up down left and right to move the focus pointer or cursor in the direction you want To enter a menu or select an ite
6. amp See the warranty card for more information on warranty terms Wide screen format LED Displays 16 9 the aspect ratio of the screen width to height are primarily designed to view wide screen format full motion video The images displayed on them should primarily be in the wide screen 16 9 ratio format or expanded to fill the screen if your model offers this feature and the images are constantly moving Displaying stationary graphics and images on screen such as the dark sidebars on nonexpanded standard format television video and programming should be limited to no more than 5 of the total television viewing per week Additionally viewing other stationary images and text such as stock market reports video game displays station logos web sites or computer graphics and patterns should be limited as described above for all televisions Displaying stationary images that exceed the above guidelines can cause uneven aging of LED Displays that leave subtle but permanent burned in ghost images in the LED picture To avoid this vary the programming and images and primarily display full screen moving images not stationary patterns or dark bars On LED models that offer picture sizing features use these controls to view different formats as a full screen picture Be careful in the selection and duration of television formats used for viewing Uneven LED aging as a result of format selection and use as well as burned in images are not covered by your
7. picture size contrast etc and the Hotel side menu Setting Auto Initialize Cloning from USB to TV Copies menu settings in a USB device to a TV Shortcut Turn the TV off insert the USB device turn the TV on and then press the ENTERL button for 5 seconds To clone data to the TV using the Hotel menu follow these steps 1 Turn the TV off rise 2 Insert the USB drive into the USB port on the rear of the TV an Ud 3 Turn the TV on Setting Auto Initialize 4 Enter the Interactive menu by pressing these buttons in order MUTE 1 1 9 ENTERCS 5 Press the A or Y button to select Clone USB to TV and then press the ENTERCS button 6 The message Clone TV to USB is displayed Press the ENTERL button 7 The TV displays one of the following messages e In Progress Copying data to TV e Completed Copy was successful e Failed Copy was not successful e No USB USB is not connected e No File There is no file to copy on the USB device If you get a No File message check the folder on your USB device The folder name should be T MST14AKUCB amp Tables that list the settings that are cloned in the Interactive and Standalone Hotel Menus begin on the next page English 33 Settings Cloned in the Hotel Menu Menu Item Hospitality Mode SI Vendor Power On Channel Power On Channel Num Power On Channel Type Power On Volume Power On Volume Num Min Volume Max Volume Power On Source Power On Opti
8. 1920 x 1080 1920 x 1080 3840 x 2160 3840 x 2160 3840 x 2160 3840 x 2160 3840 x 2160 4096 x 2160 4096 x 2160 4096 x 2160 4096 x 2160 4096 x 2160 15 625 15 734 31 250 31 469 37 500 45 000 28 125 33 750 27 000 28 125 33 750 56 250 67 500 54 000 96 250 67 500 112 500 135 000 94 000 96 250 67 500 112 500 135 000 27 000 27 000 27 000 27 000 74 250 74 250 74 250 74 250 74 250 74 250 74 250 148 500 148 500 297 000 297 000 297 000 994 000 994 000 297 000 297 000 297 000 994 000 994 000 Polarity horizontal vertical af afi he Front view Side view Unit inches Ce 6e e eo us m 27 Jack panel detail Rear view Unit inches o e e 6e is Ge o Engish 53 Base Stand detail Unit inches Unit inches IE eee HG50ND890U 5 7 HG55ND890U HG65ND890U 8 1 amp NOTE All drawings are not necessarily to scale Some dimensions are subject to change without prior notice Refer to the dimensions prior to performing installation of your TV Not responsible for typographical or printed errors D4 Engish fi Important Warranty Information Regarding Television Format Viewing
9. For power supply and power consumption information refer to the label attached to the product DO Engish Display Resolution When you use your TV as a computer monitor you can also select one of the standard resolutions listed in the Resolution column The TV will automatically adjust to the resolution you choose Display Horizontal Vertical frequency Clock frequency IBM 720 x 400 31 469 70 087 28 322 640 x 480 MAC 832 x 624 1152 x 870 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1152 x 864 1280 x 720 1280 x 800 1280 x 1024 1280 x 1024 1366 x 768 1440 x 900 1600 x 900RB 1680 x 1050 1920 x 1080 VESA DMT 30 240 57 284 100 000 25 175 31 500 31 500 40 000 90 000 49 500 65 000 75 000 78 750 108 000 74 250 83 500 108 000 135 000 85 500 106 500 108 000 146 250 148 500 Polarity horizontal vertical a af Engish D Display Horizontal Vertical frequency Clock frequency 720 1440 x 576i 720 1440 x 480i CEA 861 amp NOTE The interlaced mode is not supported The set might operate abnormally if you select a non standard video format Separate and Composite modes are supported SOG Sync On Green is not supported D 2 Engish 720 x 576 720 x 480 1280 x 720 1280 x 720 1920 x 10801 1920 x 10801 1920 x 1080 1920 x 1080 1920 x 1080
10. No File appears and there is a logo file on the USB device check the file format e Logo File Format The TV supports only BMP and AVI format The file name must be samsung bmp or samsung avi The maximum resolution of the BMP format is 960 x 540 The maximum file size for AVI format is 30MB The TV does not change the size or scale of the image 3 2 English il USB Cloning The USB Cloning function lets you download user configured settings Picture Sound Input Channel Setup and Hotel Setup from one TV to a USB device and then upload these settings from the USB device to other TV sets This lets you create a standard file of settings and distribute that standard file to all the TVs in your facility e Cloning from TV to USB Copies stored menu settings from a TV to a USB device 1 Insert a USB drive into the USB port on the rear of the TV 2 Enter the hotel option menu by pressing buttons in order MUTE 1 1 9 ENTER 4 3 Press the A or Y button to select Clone TV to USB and press the ENTERCS button 4 When the message Clone TV to USB is displayed Press the ENTERL button 5 The TV displays one of the following messages e In Progress Copying data to USB e Completed Copy was successful e Failed Copy was not successful Clone USB to TV e No USB USB is not connected The clone folder will be labeled T MST14AKUCB amp The cloned values include the values on the Guest side menu brightness
11. Samsung limited warranty e SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT Subject to the requirements conditions exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics SAMSUNG products and the requirements conditions exclusions and limitations contained herein SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada and in Canada on SAMSUNG products purchased in the United States for the warranty period originally specified and to the Original Purchaser only The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center Along with this Statement the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center Transportation to and from the Service Center is the responsibility of the purchaser Conditions covered are limited only to manufacturing defects in material or workmanship and only those encountered in normal use of the product Excluded but not limited to are any originally specified provisions for in home or on site services minimum or maximum repair times exchanges or replacements accessories options upgrades or consumables For the location of a SAMSUNG Authorized Service Center please call toll free Inthe United States 1 866 894 0524 In Canada 1 800 213 8513 E License DOLBY Manufactured under licence
12. Tools menu Use the up or down arrow keys to change the channel number Select OK when done and then press the ENTERCS button amp When you change the channel number the channel information is not updated automatically Adjust 4 Space 2 Return a BR N e Rename Channel Use Rename Channel to change the name of a channel you select Rename Channel To change the name of a channel follow these steps ered SAAB dea 1 Select a channel on the Channel Edit screen 2 Press the TOOLS button on your remote _ a 3 Select Rename Channel in the Tools menu LS 7 5 4 Use the on screen keyboard that appears to enter the new name for the ps fi fu fy jw fx fy fz fo LS PRE AN CR PS channel Use the arrow buttons on your remote to select a letter or number and then press Enter Repeat for each letter or number you want to select Done LA Delete Space D Return 5 When finished select Done on the bottom of the screen and then press the ENTERCS button e Information Use Information to view information about a channel you select To view information about a channel follow these steps 1 Select a channel on the Channel Edit screen 2 Press the TOOLS button on your remote 3 Select Information in the Tools menu 4 Select OK and then press the ENTERL button to close the Information screen Engish 45 The external sources of this TV are displayed in the last page of the Cha
13. channel or manually by the Local Time Manual o user when the TV is in stand alone mode Clock e Time Channel The clock is set from the selected channel Enable or disable the alarm function Timer Type WakeUp e WakeUp Enable the alarm function to turn on the device at the specified time e OnOff Disable the Alarm function Select channel band of the channel to get the time information AIR analog air CDTV band DTV digital air band CATV analog cable band CDTV digital cable band Time Channel Num Music Mode AV Select the number of the channel to get the time information Allows music output from an mp3 audio player connected to an AV Input Source on the TV When on you can hear sound from the player through the TV whether there is a video signal or not Also mutes the video so the TV does not display a picture when a guest is playing music The TV s backlight however remains on Allows music output from an mp3 audio player connected to an Component Input Source on the TV When on you can hear sound from the player through Music Mode Comp OFF the TV whether there is a video signal or not Also mutes the video so the TV does not display a picture when a guest is playing music The TV s backlight Music Mode Backlight however remains on Priority AV Music Mode When set to Off the TV s backlight is turned off entirely when a guest uses the Music mode To save energy set to Off Lets you set the priority of
14. it is not available to edit DTV channels in Channel Editor e OFF Does not check the DTV Program channel number If Dynamic SI is Off it is available to edit DTV channels in Channel Editor but additional DTV channel program number update is not supported 26 English Hotel TV Function Category initial value Description Picture Menu Lock Enable or disable the Picture Menu e ON The Main M is displayed Teens coer e Main Menu is displaye e OFF The Main Menu is not displayed Tools Display Hide or show the Tools menu Channel Menu Display Hide or show the Channel menu Turning the front panel local key operations on off Unlock Unlocks all panel keys Unlock e Lock Locks all panel keys isa Locks all panel keys except the Power panel key Menu Source Locks the Menu and Source panel keys OFF The Home Menu is not displayed ON The Home Menu is displayed E Home Menu ON The Home Menu is Auto Start OFF The Home Menu is not Auto Start OFF The feature of SW Clock becomes not available SW Clock If this item is selected and a user presses the INFO key of the remote twice consecutively in the standby mode of TV the clock information is displayed in the screen of TV and then TV is turned off automatically Menu OSD Panel Button Lock Home Menu Display Home Menu Editor Home Menu Auto Start Clock Type o fe Select the way to update the clock data e Manual The clock is set automatically from the DTV
15. patterns System ER Press the Menu button to turn off the test patterns and exit FF Self Diagnosis for HTV ATV Cable AGC Gain Default Lets you control the AGC gain of the analog cable channels Don t change the default value unless problems occur DTV OpenCable AGC Gain Defan Lets you control the AGC gain of the digital cable channels Don t change the default value unless problems occur If the Samsung Sound Bar device is connected to this TV this item lets you to select where the TV sound is outputted when the TV is turned on e ON When the TV is turned on the TV sound is automatically outputted in the Sound Bar Out O Sound Bar device only e OFF When the TV is turned on the TV sound is automatically outputted in the TV speaker device only See page 40 EE TE Display the web site of related Samsung service center software version and 9 Mac address information When the TV is in standby mode you can configure the settings of external LED Standby LED ON e ON The LED is on e OFF The LED is off IVReset Returns all settings on the TV to their factory defaults amp REACH Remote Enhanced Active Control for Hospitality is a professional interactive remote controller that lets you deliver TV firmware updates cloning data channel mapping changes REACH contents and TICKER contents through RF DTV to several hundred hospitality TVs simultaneously The REACH functions are available only in standalone mode The REACH S
16. the 7610 RJP AV jack You can choose 1 2 or 3 with 1 being the highest and 3 the lowest The TV automatically displays the source with the higher priority For example lets say AV is set to 1 and HDMI is set to 2 If a guest has attached a device to the HDMI jack and then plugs a device into the AV jack the TV will automatically switch to the device plugged into the AV jack the jack with the higher priority Note that a guest can also switch devices manually by pushing a button on the 7610 RJP Lets you set the priority of the 7610 RJP HDMI jack You can choose 1 2 or Remote Jack Priority HDMI 3 with 1 being the highest and 3 the lowest The TV automatically displays the Pack source with the higher priority See above for a more detailed explanation Select which AV source of the TV is connected to the RJP jack Select which HDMI source of the TV is connected to the RJP jack HDMI1 DVI Allows music output from an mp3 audio player connected to an HDMI Input Source HDMI Music Mode OFF When on you can hear sound from the player through an HDMI input of the RJP whether there is a video signal or not This option is only compatible with the Guest link RJP English 2 7 Hotel TV Function pe Description Category Initial value When USB is connected to the TV e Default a popup window appears e Automatic This enters the USB content menu automatically e Disable Neither the popup window nor the menu appears If set to O
17. OME Screen Displays My Contents Watch TV and Source icons on the TV screen Press to display channel and TV information on the TV screen Exit the menu Buttons used in Channel list Media Play menu etc B button Enter the hour your want the TV to turn on Use these buttons in the Media Play and Anynet modes Installing batteries Battery size AAA Match the polarity of the batteries to the symbols in the battery compartment After you have installed the batteries use a screwdriver to screw in the screw that holds the battery cover closed amp NOTE Use the remote control within 23 feet of the TV Bright light may affect the performance of the remote control Avoid using near fluorescent lights or neon signs The color and shape of the remote may vary depending on the model Engish 11 Using the Samsung Smart Control Buttons and Functions MIC Use the microphone with the Voice Control and Voice functions The Voice Control function can be affected by unclear pronunciation voice level or surrounding noise C4 Cuts off the sound temporarily Turns the TV on and off SEARCH Run search function Not available KEYPAD Displays the On Screen Remote SOURCE Displays and lets you select video sources VOICE Takes your voice commands and lets you enter text using your voice Changes channels Adjusts the volume Touch pad Place a finger on the touch pad and mo
18. Select to turn subtitles on or off Changes the picture size This function automatically shuts off the TV after a preset period of time Lets you select the Picture Mode Launches the Web Browser Set the alarm time when TV will automatically be turned on Move To The Right Move To The Left Moves the Onscreen Remote on the screen Large Size Normal Size Resizes the Onscreen Remote on the screen Alternatively navigate to the System gt Smart Control Settings menu and select and set the Onscreen Remote Size option Touch Sensitivity Lets you change the touch pad sensitivity Alternatively navigate to the System gt Smart Control Settings menu and select and set the Touch Sensitivity option Cancel Select to close a pop up menu Connecting to the Network You can set up your TV so that it can access the SMART TV applications through your local area network LAN using a wired or wireless connection amp After you have physically connected your TV to your network you must configure the network connection to complete the process You can configure the connection after the Initial Setup process through the TV s menu Network Connection Wireless Connect the TV to the Internet using a standard wireless router or modem Wireless IP Router or Modem that has a DHCP Server The LAN Port on the Wall SAMSUNG LAN Cable Not Supplied Network Connection Wireless e Thi
19. Size Picture Size Position PIP Advanced Settings Dynamic Contrast Black Tone Picture Flesh Tone RGB Only Mode Color Space White Balance Gamma Motion Lighting Picture Options Color Tone Digital Clean View MPEG Noise Filter HDMI Black Level HDMI UHD Color Film Mode Auto Motion Plus Picture Off Reset Picture Sound Mode Sound Effect Vitual Surround Dialog Clarity Equalizer Speaker Settings Additional Settings Audio Format Audio Delay Dolby Digital Comp Auto Volume Reset Sound Accessibility Voice Guide Video Desciption Caption Menu Transparency High Contrast Enlarge Menu Language Smart Control Settings Motion Sensitivity Touch Sensitivity Onscreen Remote Size Voice Control Language TV Voice Voice Gender Motion Control Motion Control Animated Motion Guide Pointer Speed Motion Control Environment Test Device Manager Keyboard Settings Mouse Settings Time Clock Sleep Timer Wake up Timer Eco Solution Energy Saving Eco Sensor No Signal Power Off Auto Power Off Smart Security Auto Protection Time Change PIN General Game Mode BD Wise Sound Feedback Boot Logo Samsung Instant On Anynet HDMI CEC Anynet HDMI CEC Auto Turn Off Device search DivX Video On Demand Engish 37 al Hotel Plug amp Play The Hotel Plug amp Play function which automatically performs the Hotel mode selection Country Setup Clock Setup and Picture Mode Setup runs once when power is first turned ON Setup also run
20. be accessible when a remote has a RED CARD Channel Bank Editor Bank1 4 Bankz2 6 Bank3 36 M ie DE SE S pa Da Si Move 4 Select Deselect 9 Return Information About SMOOVIE Remote Controls e lf you select SMOOVIE as the SI vendor you should also use SMOOVIE remotes in your facility e Guests with remotes that do not have a card can only view channels from Bank 1 e Guests using the Numeric keys on the remote to change channels can only view channels from Bank 1 e Guests with remotes that have Green or Red cards must use the channel up down keys to change channels e Guests can only see channels from the Bank1 channel list In the Channel Guide or the Channel List Smoovie Set Up Sequence Smoovie TV Setup Air Cable 1 Do a complete P amp P including Air or Cable auto tune Enter the Hotel menu Select the channel type 2 After P amp P the TV displays the Hotel menu ATV or ADTV for Air CATV or CDTV for cable Select the channel type 3 ATV or ADTV for Air Select Smoovie TV in the Hotel menu CATV or CDTV for cable 4 Select Channel Setup Select Channel Setup Can be skipped 6 7 Set up channels in the CH Bank Editor 8 After power off amp on guests canuse the TV CE Select Air or Cable to auto tune Select Air or Cable to auto tune Can be skipped Set up channels in the CH Bank Editor Set up channels in the CH Bank Editor After power off amp on guests can use the TV
21. cally searches for channels The OSD Display time which starts when the Auto Store operation is completed and continues until the Auto Sort function starts is 30 seconds Set Clock Mode DST Daylight saving time and Time Zone OSD Initially highlighted Clock Mode Auto DST Off Time Zone Eastern Ifthe TV will be tuned to digital broadcast channels and these channels transmit date and time information set the Clock Mode to Auto The TV will set the date and time automatically Ifthe TV will not be tuned to digital broadcast channels set the Clock Mode to Manual and then set the date and time on the TV manually Set DST On or Off to apply or not apply daylight saving time to the TV Select your time zone on the map that appears English 39 pl USB Software Upgrade Method Samsung may offer upgrades to the TV s SW in the future Please contact the Samsung Hospitality Hot line at 1 866 894 0524 to receive information about downloading upgrades and using a USB drive to update the SW by connecting the USB drive containing the upgrade to the USB port located on the TV When the software is upgraded video and audio settings you have made will return to their default factory settings We recommend you clone the hospital settings so that you can easily reset them after the upgrade To upgrade the TV s software follow these steps 1 Insert a USB drive containing the SW upgrade into the USB port on the
22. de AV in the menu on See page 27 e Music mode in the TA 7610 RJP is supported by the AV jack only HDMI Music mode is available for the Guestlink RJP only 24 Engish Setting the Hotel Option Data To let you control how the TV functions when in Hotel mode the TV has two Hotel mode menus the Stand alone mode menu and the Interactive mode menu The menu items that differ between the modes are listed below Menu items in the Stand alone mode only Sl Vendor Smoovie REACH Server and its submenus Menu items in the Interactive mode only l Vendor Samsung and other vendors All other items appear in both modes To access the menus press MUTE 1 1 9 gt ENTERCS on your Samsung remote After a menu appears follow these general directions to navigate and change values Use the Up and Down arrow buttons on the Samsung remote to move from menu item to menu item Press the ENTERLC or Left or Right arrow buttons to select a menu item The screen displays that menu item only Press the Left or Right arrow button to change a value The Right arrow button increases numerical values The Left arrow button decreases numerical values When the screen is displaying one menu item you can press the Up or Down arrow button to display the next or previous menu item Press the RETURN or MENU button to exit the current menu item and go to a higher menu level or the Main menu To exit a Hotel mode
23. e press the yellow button on the remote To apply the video mute to two or more channels simultaneously select multiple channels in Step 1 and then press the yellow button on the remote To view information about a channel including video mute set up press the INFO button on the remote Press the TOOLS button on the remote to rename a channel or change the channel number See page 40 Channel Editor Functions and Remote Button FX Red Delete Deletes a channel from the channel list E Green Select All Selects all channels at once Yellow Deselect All Deselects all channels at once P Blue Video Mute On Off You can set the Video Mute On Off Page Moves to next or previous page 1 Information Display details of the selected channel 41 Tools Displays the option menu 9 Return Returns to the previous step or exits 44 Engish When you press the TOOLS button the following menu is available Channel ay AW Edit Channel Number BAY 3 Rename Channel mA A Information ay A SEA RS DA 7 E Air 7 1 SEA RR E Air 8 1 9 Return LA Delete E Select All Video Mute On Information Page C Select 4 Tools D Return e Edit Channel Number Use Edit Channel Number to change the channel number of a channel you select To change a channel number follow these steps c 1 Select a channel on the Channel Edit screen Press the TOOLS button on your remote Select Edit Channel Number in the
24. e TV to low energy saving mode e Medium Sets the TV to medium energy saving mode e High Sets the TV to high energy saving mode Displays a the Welcome Message for 5 seconds when the TV turns On Edits the Welcome Message Turns the Hospitality logo feature On or Off If On when the TV is turned on the Logo is displayed before the signal from the initial source for the amount of time set in Logo Display Time Downloads the Hospitality logo Hospitality logo file requirements e BMP or AVI files only e Max file size BMP 960 X 540 AVI 30MB e The file can only be named samsung bmp or samsung avi Hospitality Logo Display Time 3 5 7 seconds Clone the current TV options to a USB memory device Clone the saved TV options on a USB memory device to the TV If you set Setting Auto Initialize to On and the TV s power is turned off and on TV menu items are restored again to their values cloned initially See page 37 e ON The feature of REACH 3 0 in this TV becomes available e OFF The feature of REACH 3 0 in this TV becomes not available Assign a DTV channel number to carry the update REACH data This channel number must be the same as the number set on the Reach server REACH Channel REACH Select the group ID of the REACH server Refer to the REACH server manual for Group ID Solution more details IPG Room Type Default Selects the IPG room type of the REACH server Refer to the REACH server manual for the more information
25. e of the HDMI 1 2 version contact to the Samsung customer care center Refer to page 55 for the information of the Samsung customer care center amp Use a cable shorter than 10 feet 3m to get the best UHD viewing quality LAN Connect to a wired LAN using CAT 7 cable ANT IN AIR CABLE To view television channels correctly the TV must receive a signal from one of the following sources An outdoor antenna A cable television system A satellite receiver DATA Used to support data communication between the TV and the SBB or STB Connects using RJ 12 TV type plugs COMPONENT AV IN 1 Use to connect to Component video audio devices such as DVD players and AV Composite devices such as VCRs Connect audio cables to R AUDIO L on your TV and the other ends to corresponding audio out jacks on A V or Component devices The COMPONENT jack is also used as the VIDEO jack Connect component video cables not supplied to the component jacks PR PB Y on the rear of your TV and the other ends to corresponding component video out jacks on a DVD player Match the colors on the jacks and cables lf you want to connect both a Set Top Box and a DVD player you should connect the Set Top Box to the DVD and connect the DVD to the component jacks PR PB Y on your TV The PR PB and Y jacks on your component devices DVD are sometimes labeled Y B Y and R Y or Y Cb and Cr F
26. er only whenever TV is turned on Models supporting the ARC function are listed below e Sound Bars HW H450 H550 H570 H600 H7500 HW J450 J470 J550 J6000 e Setting the Soundbar AirTrack to Hotel Mode 1 Set the following Hotel menu options Hotel option gt External Device gt Sound Bar Out On Hotel option gt Power On gt Power On Volume User Defined Hotel option gt Power On gt Power On Volume Num gt Set greater than O Hotel option gt Power On gt Max Volume gt Set greater than O 2 Connect an HDMI cable from the HDMI OUT jack on the back of the Soundbar AirTrack to the HDMI2 port supporting ARC on the hospitality TV 3 After the Soundbar AirTrack is connected to the hospitality TV when the TV turns on the Soundbar AirTrack automatically detects the TV and then automatically switches to Hotel Mode 40 Engish Soundbar AirTrack Hotel mode functional characteristics e Power On Off is synchronized with the TV e HDMI_CEC defaults set to On e Functions through the HDMI OUT port only e Disables the Input mode key on the VFD to prevent unexpected audio source changes e Acquires adjustable Power On and Max Volume settings from the TV s Hotel option menu Soundbar s Power On Volume and Max Volume values however are 1 2 of Power On Volume and Max Volume settings in the TV s Hotel option menu Example If the TV s Power On Volume 20 and Max Volume 90 then Soundbar s Power On V
27. erver is sold separately Refer to the REACH server manual enclosed with the REACH server product for more operating information 30 English al Welcome Message The Welcome Message feature displays a custom message on the TV every time it is turned on Welcome message settings are in the Hotel Option Menu Set Welcome Message to ON to display the message when the TV is powered on Edit Welcome Message Hospitality Logo You can make the Welcome Message up to 25 characters long and edit it in the Hotel Service menu Welcome Message supports the following characters amp Capital Letters from A to Z You can edit the Welcome Message by using the remote s navigation color and Enter buttons in the Edit Welcome Message OSD See the illustration below Edit Welcome Message Move 4 Enter 5 Return Below are the general directions for navigating and changing letters on the Edit Welcome Message screen Press the EY button on the remote to move to the left in the message Press the E button to move to the right After you have selected a position in the message use the arrow buttons on your remote to select a letter in the alphabet below the message Press Enter to place a letter into the position you selected Press the button to erase a letter in a position or enter a blank Press Return or the D button to exit Engish BL il Hotel Logo The Hospitality Logo function displays the Hotel s picture image when t
28. es Yes Yes N A Yes N A Yes N A N A N A N A Yes Yes Yes Yes N A Engish 39 a Multi Code Remocon A Multi Code Remocon is a special remote which is designed to control multiple TVs This function is useful where there is more than one TV in a location You can control up to 10 TVs with a different ID code of each remote with no conflicts between the TVs ID numbers are displayed on each TV s OSD The Initial ID code for each TV is 0 You can set and reset the ID code in Analog TV mode or PC mode Not available in DTV mode You can set the ID code to any digit from O to 9 To seta TV s ID code follow these steps 1 Aim the remote at the TV and then press the MUTE button and the RETURN button simultaneously for more than 7 seconds When you stop pressing the buttons the TV displays the current ID in the middle of the screen and the words Remote control code is set to x If you want to change the Remote control code enter the digit you want to change 2 Press the number on the remote you want to assign to the TV The TV displays the following words Remote control code is changed to x amp The TV will display the OSD until you press the Exit button See the example below Remote control code is changed to 0 If you want to change Remote control code enter the digit you want to change Example After you see the message above if you press 1 the TV and Remote will be set to ID code 1 T
29. for assistance when installing the wall mount bracket Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you select to install the TV on your own Securing the TV to the Wall A Caution Pulling pushing or climbing on the TV may cause the TV to fall In particular ensure your children do not hang on or destabilize the TV Doing so may cause the TV to tip over causing serious injuries or death Follow all safety precautions provided in the Safety Flyer included with your TV For added stability and safety you can purchase and install the anti fall device as described below To Prevent the TV from Falling amp TV Holder Kits are sold separately To purchase a TV Holder Kit contact Samsung Customer Care 1 Insert the screws into the wall brackets and firmly fasten them to the wall Make sure the screws are firmly fixed to the wall amp We strongly recommend you drive the screws into a stud N Insert the screws into the wall brackets and firmly fasten the screws to the top VESA screw holes on theback of the TV 3 Connect the brackets on the TV and the brackets on the wall with a strong string or cable and then tie the string or cable tighrly to the brackets amp Verify all connections are properly secured Periodically check the connections for any sign of fatigue or failure If you have any doubt about the security of your connections contact a professional installer a
30. from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby DIGITAL PLUS Laboratories For DTS patents see http patents dts com Manufactured under license from DTS Inc DTS the Symbol S dts DTS in combination with the Symbol DTS Premium Sound 5 1 DTS Digital Surround DTS Express and DTS 1 Neo2 5 are registered trademarks or trademarks of DTS Inc in the United States and or other countries DTS Inc All Rights Reserved Premium Sound 5 N i For DTS patents see http patents dts com Manufactured under license from DTS Licensing Limited DTS the Symbol amp DTS and the Symbol together are registered trademarks and DTS Studio Sound is a trademark of Studio Sound DTS Inc DTS Inc All Rights Reserved DI WX DivX Certified to play DivX video up to HD 1080p including premium content HD DivX DivX Certified and associated logos are trademarks of DivX Inc and are used under license ABOUT DIVX VIDEO DivX is a digital video format created by DivX Inc This is an official DivX Certified device that plays DivX video Visit www divx com for more information and software tools to convert your files into DivX video ABOUT DIVX VIDEO ON DEMAND This DivX Certified device must be registered in order to play purchased DivX Video on Demand VOD movies To obtain your registration code locate the DivX VOD section in your device setup menu Go to vod divx com for more information on h
31. guage Essential Details How do you get your broadcast signal Select your language to start the on screen setup a 4 v English mea ZEO This is basic setup to use your Smart TV Choose a picture mode that best suits your Y Both 5 viewing environment ee Picture Mode Standard lt 3 gt Air b Previous Select Both to scan for both Air Next chennels and Cable channels Press the A SE 4 gt Cable buttons to move the Frangais highlight Press the enter button to select Previous The Language Setting will be applied to Main Menu and not Plug and Play Select your language Select Picture mode Select the channel band E to use for Auto Program Press Power OFF to exit Auto Program Auto Program is finding channels for you Channel 7 D DTV Air DTV Cable 2 0 Air 0 0 Cable 0 Standalone Hospitality Option Menu appears After Searching channels Auto Program Clock Auto Program is incomplete 0 Channels are memorized DTV Air Clock Mode Auto lt ar Previous remppa seen Date aa f aa anan DTV Cable Cable TV Setup Complete You can adjust your time to set DST Time Zone and clock g i Your TV is now ready to use mode Set current date and time Previous Time DST Time Zone Change settings Sean Aga Select Clock Mode DST and your Time Zone 38 English Hotel Plug amp Play OSD Initially highlighted Interactive Ifyou select the S
32. he TV is powered on Hospitality Logo settings are the Hotel mode menus The Logo Download and Logo Display Menu items are enabled when you turn the Hospitality Logo option on If there is a logo image stored in memory and the Hospitality Logo option is on the Hospitality logo is displayed when the TV is turned on The Hospitality logo is not displayed when the Hospitality found Logo option is off even if the logo image has been loaded into the TV Hospitality Mode Standalone Widget Solution SI Vendor OFF DRM Power On System Channel MyChannel AUGURONI D Welcome Message Clock Music Mode Hospitality Logo Remote Jack Pack External Source Bathroom Speaker Eco Solution Cloning REACH Solution Network e Hospitality Logo This option lets you choose whether the Hospitality Logo image is displayed or not Initial value is OFF Can be set to OFF or ON When set to ON the Logo Download and Logo Time Display menu items become accessible e Logo Download This option lets you download the logo image to the TV s memory from a USB device A wait message appears while the image is being copied to the TV A completed message appears when the copy operation finishes successfully The word failed appears if the copy operation was unsuccessful No USB appears if no USB device is connected No File appears if there is no file to copy on the USB device or the file is in the wrong format must be a BMP or AVI file If
33. he TV then displays the following message Remote control code is changed to 1 The TV can then only be controlled by a remote which has the same ID code 1 To reset the ID code press the MUTE button and the EXIT button simultaneously for more than 7 seconds When you stop pressing the buttons the ID codes of the TV and Remote are reset to 0 Remote control code is set to 0 appears on the TV 36 English i Setting Auto Initialize When you clone settings from one TV to another you clone both the guest side menu and hotel side menu settings Picture Sound Input Channel Setup and Hotel Setup This lets you set nearly all of the menu values on your hospitality TVs to the same standard settings If you allow guests access to the guest side menus for example the Picture menu they can change the settings in those menus so they are no longer standard If you set the Setting Auto Initialize function to on the TV automatically restores initializes any guest side menu values to the cloned standard values when the TV is turned off and then turned on again Note that Setting Auto Initialize works on cloned guest side menu values only Settings which have not been cloned are ignored The table below lists the settings that are restored to their cloned values when you set the Setting Auto Initialize function to On Picture Mode Back light Contrast Brightness Sharpness Color Tint G R Apply Picture Mode Picture
34. hing a button on the RJP e To reset the RJP to its factory default state press the AV and HDMI buttons simultaneously for 10 seconds When all button LEDs blink 5 times the RJP reset is complete e The RJP will automatically turn off any LEDs after 5 minutes to avoid unnecessary light pollution in the hotel room The LEDs that were turned off will turn on again if the guest touches any of the buttons and the 5 minute timer will restart If the guest then touches another source button the TV will change to the selected source and the corresponding LED will be lit e After an RJP Reset or a TV Power OFF ON it takes approximately 10 seconds to establish communications between the TV and the RJP e The following table shows the approximate time in seconds it takes to switch from the TV to an input source based on assigned or default priorities Scenario 1 When no inputs are connected Source To Connect AV 2 Sec PC 0 7 Sec HDMI 3 9 Sec Scenario 2 When two or more inputs are connected to the RJP and one of the input sources is disconnected and then reconnected PO 1 4 Sec amp An example If the RJP has all its live sources AV PC and HDMI connected AV has been assigned the highest priority the RJP is in HDMI mode and a guest removes and reconnects the AV source the minimum time required to switch to the AV source is 6 5 seconds e To play audio devices Ipods MP3 devices etc through the RJP you must turn Music Mo
35. i is displ f GE e ON The Ticker content is displayed e OFF The Ticker content is not displayed OFF 2 Off OFF OFF Logo Message Hospitality Logo DL Logo Display Time Clone TV to USB Clone USB to TV Cloning Setting Auto Initialize REACH 3 0 OFF OFF All F 28 English Hotel TV Function pe Description Category Initial value j Lets you set when data such as updated SW cloning files and S LYNC REACH contents is downloaded from the REACH server to the TV e hour Every hour e 2hour Every 2 hours e 12 00 am every 12 00 a m 2 00 am every 2 00 a m 12 00 pm every 12 00 p m 2 00 pm every 2 00 p m e ON Whenever the TV enters standby mode the power cord is plugged in and the power is off the REACH data is updated on the TV e OFF The REACH data is only updated on the TV at the REACH server update time Set the room number The version of REACH is displayed If this item is entered into network setup menu is displayed The network setup menu is used for setting network like access internet Set SmartHub Model Set up SmartHub e ON The TV mode is changed to the Widget mode that TV accesses to the hospitality server through IP connection and the guest uses various services and features through Widget of TV e OFF The TV mode becomes normal the hospitality mode REACH Update Time 1hour REACH Solution REACH Update Immediate OFF REACH Server Version Network Setu
36. ing the TV s Controller amp The color and shape of the TV Controller may vary depending on the model amp The TV s Controller a small joy stick like button on the bottom right side of the TV lets you control the TV without the remote control Open Smart Hub Open the menu Select a source Turn off the TV The control stick is located at the lower left corner on the back of the TV ee ee ee ee Remote control sensor When you use the Remote control the standby LED does not respond except when you press the button Power on Turn the TV on by pressing the Controller when the TV is in standby mode Adjusting the volume Adjust the volume by moving the Controller from side to side when the power is on Selecting a channel Select a channel by moving the Controller backwards and forwards when the power is on Using the Function menu To view and use the Function menu press and release the Controller when the power is on To close the Function menu press and release the Controller again Selecting the MENU fH With the Function menu visible select the MENU M by moving the Controller to the left The OSD On Screen Display Menu appears Select an option by moving the Controller to the right Move the Controller to the right or left or backwards and forwards to make additional selections To change a parameter select the it and then press the Controller Selecting SMART HUB 8 With the Function menu visib
37. l to the cable EX LINK Connect this jack to the jack on the optional RJP Remote Jack Pack This will allow you to connect external devices Camcoder PC DVD players etc easily VARIABLE AUDIO OUT Used for the audio output to the Bathroom speaker Connect the Bathroom Wall Box and the Variable port RCA VOL CTRL Used to control the volume of the Bathroom speaker Connect the Bathroom Wall Box and the VOLCTRL port 8 English DVI AUDIO IN Connects to the audio out jack of an external DVI device using a 1 8th inch stereo phone jack cable Some DVI devices may not or should not need this connection audio USB 5V 0 5A USB 3 0 HDD 1 0A CLONING Connector for software upgrades and Media Play etc Service connection HDMI IN 1 DVI 2 3 ARC Connects to the HDMI jack of a device with an HDMI output amp No separate sound connection is needed for an HDMI to HDMI connection HDMI connections carry both audio and video amp Use the HDMI IN 1 DVI jack for a DVI connection to an external device Use a DVI to HDMI cable or DVI HDMI adapter DVI to HDMI for the video connection and the PC DVI AUDIO IN jacks for audio Some DVI or HDMI devices may not or should not need a DVI AUDIO IN connection for audio amp It is recommended that the external device of the HDMI 1 3 or 1 4 version will be used with this TV If you meet the compatible problem like no sound or the abnormal screen or etc with the devic
38. le select SMART HUB by moving the Controller upwards The SMART HUB main screen appears Select an application by moving the Controller and then pressing the Controller Selecting a Source J With the Function menu visible open the Source screen J by pushing the Controller to the right The Source screen appears To select a source move the Controller back and forth When the source you want is highlighted press the Controller Power Off With the Function menu visible select Power Off by pulling the Controller forwards and then press the Controller amp To close the Menu SMART HUB or Source press the Controller for more than 1 second Standby mode Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power To be safe and to decrease power consumption do not leave your TV in standby mode for long periods of time when you are away on vacation for example It is best to unplug the power cord Engish Z The Connection Panel VARIABLE Z O Z o 99 fe 5 on os Q S x 2 a Z F j HDMI IN 3 ARC COMPONENT AVIN1 Agg OUw 2S8 E m O T zZ I Z N DIGITAL AUDIO OUT OPTICAL oan amp Whenever you connect an external device to your TV make sure that power on the TV and the device is turned off amp When connecting an external device match the color of the connection termina
39. m highlight the item or the menu title or move the pointer over it and then press the touch pad In Smart Hub highlight an item and then press and hold the touch pad The context sensitive menu for the item pops up The context sensitive menu may vary depending on the item you selected On a Smart Hub panel drag left or right on the touch pad The previous or next Smart Hub panel appears When you are using the web browser drag up or down on the touch pad to scroll the web screen 14 Engish Reconnecting the Samsung Smart Control to the TV If the Samsung Smart Control stops operating or works abnormally try replacing the batteries If the problem persists pair the Samsung Smart Control and TV again 1 Move to within a foot of the TV and then aim the Samsung Smart Control at the TV s remote control receiver Remote Control Sensor 2 Press the RETURN button and GUIDE button simultaneously for 3 seconds 3 The connection icon appears on the screen A few moments later the connected icon appears The Samsung Smart Control is paired to the TV The Low Battery Alarm Window If the Samsung Smart Control s batteries become low the Low Battery Alarm appears on the screen When the Alarm appears replace the batteries We recommend using alkaline batteries for longer operating life lt Low battery Alarm Icon gt Engish 15 Displaying and Using the On Screen Remote Press the KEYPAD button on the Samsung Smart C
40. me Control Box gt VOL P VOL VOL DOWN VOL UP GND White Black Red Shield Wire e Installing the Volume Control lf you configure the Volume Control Box as shown in the figure above you can control the volume of the bathroom speakers The jack that connects the Volume Control Box to the TV is a 3 5mm normal Phone jack Volume Control Box switch is a Tact switch 3 Set the Sub AMP Mode 0 Deactivates the sub amplifier that outputs the voice signal of VARIABLE AUDIO OUT No voice signal is output from VARIABLE AUDIO OUT 1 Adjusts the voice output of VARIABLE AUDIO OUT according to the volume level of the TV speaker And all settings for the Hotel mode menus of Power On Volume Num Min Volume and Max Volume apply to the TV speakers and VARIABLE AUDIO OUT 2 Determines the volume according to the bathroom control panel setting 22 English Connecting the RJP Remote Jack Pack Connect the input jacks on the TV to the RJP The RJP lets guests connect audio and video sources to the TV RJP Rear 4 RS 232 Data Cable USB HDMI S VIDEO RCA AUDIO PC m L If 2 Video Audio Cable VARIABLE 1 DVI Audio cable T lt gt G S 5 z w og T 1 a pal os i 2 2 5V 0 5A USB3 HDD 1 0 ON 42 a COMPONENT gt G 3 HDMI cable dor Oaa KA Hd CE s a pr o 2 N
41. menu turn off the TV and then turn it on again Any changes you made are saved except changes to SI Vendor For changes to SI Vendor you must turn the TV off wait until the Standby light glows steadily then unplug the TV wait for the Standby LED to go off and then plug the TV in again Widget Solution SI Vendor DRM Power On System Channel Menu OSD Clock Music Mode Remote Jack Pack External Source Bathroom Speaker Eco Solution Logo Message Cloning REACH Solution Network Above The Hotel mode menu To change menus between the interactive mode and the standalone mode follow the steps below 1 Highlight the Hospitality Mode menu item in the top left corner of the menu 2 Press the left or right arrow button on the Samsung remote Only the Hospitality Mode menu item is displayed 3 Press the left or right arrow button to change the Hospitality Mode item from Standalone to Interactive or from Interactive to Standalone 4 Press the Return or Menu button on the remote The entire menu re appears with your selection displayed in the Hospitality Mode field amp After you have set the values in one TV you can clone those values to multiple TVs See USB Cloning on page 33 Engish 25 Menu Items To Enter this menu Press the MUTE 1 1 9 ENTERCS buttons in order To exit from this menu Power Off or Power Off and unplug if you have changed SI Vendor and then turn on again Any changes you made a
42. mp Install the TV close to the wall so that it does not fall amp Connect the string or cable so that the brackets on the wall are at the same height or lower than the brackets on the TV Untie the string or cable before moving the TV Engish 4 7 Wall Mount Kit Specifications VESA amp The wall mount kit is not supplied but sold separately Install your wall mount on a solid wall perpendicular to the floor If you are attaching the wall mount to building materials other than plaster board contact your nearest dealer If installed on a ceiling or slanted wall the TV may fall and cause severe personal injury amp NOTE Standard dimensions for wall mount kits are shown in the table below Samsung wall mount kits contain a detailed installation manual All parts necessary for assembly are provided Do not use screws that do not comply with the VESA standard screw specifications Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw specifications Screws that are too long may cause damage to the inside of the TV set For wall mounts that do not comply with the VESA standard screw specifications the length of the screws may differ depending on the wall mount specifications Do not fasten the screws too firmly This may damage the product or cause the product to fall leading to personal injury Samsung is not liable for these kinds of accidents Sam
43. n the TV displays the External Source Banner information when you change the TV source to another external input press the Info key or turn the TV on e ON The External Source information is displayed on the TV screen e OFF The External Source information is not displayed on the TV screen External External Source Banner e ON When an external input source is connected to the TV the TV identifies the input source and then automatically switches to that input source Source Auto Source e OFF Auto Source function is Off Ahneet Reun Source Power On Select the return TV source after stopping an Anynet HDMI CEC connection y Src This fuction is especially useful for the Guestlink RJP Determines the Bathroom Speaker sound AMP operation mode Bathroom Sub Amp Mode Speaker e 0 Turns the Bathroom Speaker sound AMP function off PWM off Sub Amp Volume e 1 The Bathroom Speaker sound volume follows the TV speaker sound volume Eco Solution Energy Saving identically The Bathroom Speaker sound volume is controlled by the TV remote Welcome Message or panel keys Edit Welcome Message e 2 The Bathroom Speaker sound volume is controlled by the Bathroom Hospitality Logo Default USB Pop up Screen Z Speaker volume controller The initial Bathroom Speaker sound volume after TV is turned on Adjusts the brightness of the TV to reduce power consumption e Off Turns off the energy saving function e Low Sets th
44. n the data cables e Contact your nearest dealer or your SI Vendor to buy the data cable not included in the TV Confirm the code on the Code Label Note the labeled end Note the labeled end CON B gt gt Samsung CON A CON B OCC a i m a BN39 00865B gt E po 7 EK Provided NSeo 2 Rx 2 e 5 5 Guest Tek a lt CON B gt NXTV e Sonifi BN39 01011E MORONS z 3 Provided 20 English Connecting the Audio Output to an Audio Amplifier TV Rear Panel AUDIO IN Audio Amplifier 1 Stereo cable 1 Connect the AUDIO OUT port of the TV to the Audio In port of an audio amplifier with a stereo cable Engish 21 Connecting the Bathroom Speakers You can connect the Bathroom Speakers in the following manner Connecting through the Variable Output available without an external amplifier TV Rear Panel es AUDIO OUT q Speaker _vot vo DVI 1 Connect the VARIABLE AUDIO OUT port of the TV to the Bathroom Wall Speakers of the hotel Speaker Speaker N C The VARIABLE AUDIO OUT port supports MONO sound out only Speaker Wire Use speaker cable no more than 82 feet 25m in length amp The maximum speaker output is AW 80 2 Connect the VOL CTRL jack of the TV to the Volume Control Box Switch port on the Bathroom Wall of the hotel Volu
45. nction English 3 Accessories amp Please make sure the following items are included with your LED TV If any items are missing contact your dealer amp The items color and shape may vary depending on the model amp The parts for the stand are listed under Stand Components on the following page List of Parts CT CC Remote Control Samsung Smart Control Serene AA59 0081 7A amp Batteries AAA x 2 BN59 01181N amp Batteries AA x 2 Safety Guide Quick Setup Guide Data Cable depending on the model Not available in all locations BN39 00865B BN39 01011E English Installing the LED TV Stand Components When installing the stand use the provided components and parts A 1 EA B 1 EA J ET A MID x8 M4 X L14 60 55 Stand Guide Stand Screws PD x4 M4 X L14 amp Place a soft cloth over the table to protect the TV and then place the TV on the cloth screen side down Insert the Stand Guide into the slot on the bottom of the TV Slide and assemble it to the end line in the direction of arrow English D w amp Progress the assembly of screw in the manual s order A V X amp NOTE Make sure to distinguish between the front and back of each component when assembling them Make sure that at least two persons lift and move the TV 6 English Us
46. nnel Editor menu as shown in the example below In the example there are two external sources connected to the TV HDMI2 and AV You can assign a new analog channel to an external source by selecting the source on the last page pressing the TOOLS button selecting Edit Channel Number and then using the up or down arrow button on the remote to select the channel number of the analog channel lf you tune to a channel after assigning the channel to an external source you can enter the external source without opening the TV source menu Channel MLS Soccer ra EN 629 CNN NEWS American Idol 840 90210 LOST mA RTE Euro Football HDMI1 E HDMI2 HDMI3 E AV E Select All Page 4 Select 4 Tools 9 Return After assigning channel number 997 to the AV source Channel MLS Soccer ra A 629 CNN NEWS American Idol 840 90210 LOST AREY AV Euro Football aA HDMI1 HDMI2 DVI a HDMI3 EX Delete B Select All Page C Select 4 Tools D Return 46 Engish Installing the Wall Mount Preparing befor installing Wall Mount for 48 55 models To install a wall mount from another manufacturer user the Holder Ring 1 amp The Product shape may differ depending on the model Installing the Wall Mount Kit The wall mount kit Sold separately allows you to mount the TV on a wall For detailed information on installing the wall mount see the instructions provided with the wall mount Contact a technician
47. ntification Number WPS automatically configures the SSID and WPA key settings Your Smart TV cannot connect to uncertified wireless routers Engish 17 Network Connection Wired There are three main ways to connect your TV to your network using cable depending on your network setup They are illustrated below The Modem Port on the Wall External Modem TV Side Panel ADSL VDSL Cable TV r Modem Cable Not Supplied LAN Cable Not Supplied The Modem Port on the Wall External Modem IP Router that has TY Siae Panel ADSL VDSL Cable TV a DHCP Server GE e SRG o Modem Cable LAN Cable LAN Cable Not Supplied Not Supplied Not Supplied The LAN Port on the Wall TV Side Panel LAN Cable Not Supplied amp The TV does not support network speeds less than or equal to 10Mbps amp Use Cat 7 cable for the connection 18 Engish Connecting the TV to an SBB or STB TV Rear Panel a N ETH MODEM DATA i Data Cable 1 Connect the DATA jack of the TV to the ETH MODEM jack of the STB SBB with the Data cable amp The ETH MODEM jack name that you connect the Data Cable to may differ depending on the SBB or STB type English 19 List of Hospitality SI Vendors and Compatible Data Cables Supplied with the TV e Confirm you are using the correct data cable for your SI vendor Refer to the code label o
48. olume 10 and Max Volume 45 al Channel Bank Editor Smoovie TV Only The Channel Bank Editor in conjunction with the SMOOVIE remote lets you control the channels guests have access to The Channel Bank Editor provides three Banks of channels and lets you select which channels will be available from each bank SMOOVIE remotes have installable Bank Cards which correspond to the channel banks in the Channel Bank Editor The remotes only allow access to channels in the channel bank that correspond to the installed card Consequently the channels a guest can access depend on the Bank Card installed in their SMOOVIE remote Setting the Channel Bank Editor under Stand alone Mode Press MUTE 1 1 9 gt ENTERCS on the remote to enter the Hotel Standalone menu Go to SI vendor and then select Smoovie Find the new menu option Channel Channel Bank Editor Enter the Channel Bank Editor rey Hospitality Mode Standalone Widget Solution SI Vendor OFF DRM SI Vendor Smoovie Channel Channel Bank Editor lt Depending on model and region some menu items may not exist gt Engish 4L 5 Edit the Channel Bank An example is below a Bank1 Free channel Select the channels that will be accessible when a remote doesn t have a card b Bank2 Family Card Green Select the channels that will be accessible when a remote has a GREEN CARD c Banks Adult Card Red Select the channels that will
49. on Channel Setup Channel Editor Dynamic Sl Picture Menu Lock Menu Display Panel Button Lock Home Menu Display Home Menu Editor Home Menu Auto Start Clock Type Local Time Music Mode AV Music Mode Comp Music Mode Backlight Priority AV Priority HDMI AV Option HDMI Option HDMI Music Mode USB Pop up Screen External Source Banner Auto source Anynet Return Source Sub Amp Mode Sub Amp Volume Energy saving Welcome Message Edit Welcome Message Hospitality Logo Hospitality Logo DL Logo Display Time Clone TV to USB Clone USB to TV 34 Engish Cloning Support Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes N A N A Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes N A Yes N A Yes N A N A Menu Item Setting Auto Initialize REACH 3 0 REACH Channel Group ID IPG Room Type Ticker REACH Update Time REACH Update Immediate Room Number REACH Server Version Network Setup SmartHub Model Setting SmartHub Setting Widget Mode Solution Type Server URL Setting License Server IP Setting IPTV Mode Virtual Standby Instant On Room Num Setting DRM Mode PI AES Data PI AES Log View PI AES Log Self Diagnosis for TV Self Diagnosis for HTV SW Update Service Pattern ATV Cable AGC Gain DTV Open Cable AGC Gain Sound Bar Out TV reset Cloning Support Yes Yes Yes No No Yes Yes Yes Yes N A N A Yes N A Yes Yes Yes Yes Y
50. ontrol to display the On Screen Remote on the TV s screen Use the On Screen Remote to enter numbers control content playback and use the features and functions of the TV just like a real remote Use the directional buttons on the Samsung Smart Control to move the cursor on the On Screen Remote Press the touch pad on the Samsung Smart Control to select The On Screen Remote buttons may vary depending on the TV features or functions you are using Button NNI PV NN PA A E G D TOOLS INFO MENU 3D PIP CC P Size SLEEP P Mode Web Browser ALARM 16 Engish Description Lets you switch channels by entering channel numbers directly Select Pre CH to return to the previous channel Controls the playback of video photo or music files from all sources and the playback of media content on external devices for example a Blu ray player Use these colored buttons to access additional options specific to the feature in use Press to display the Tools menu while you are watching TV The Tools menu gives you easy access to frequently used functions The functions listed are context sensitive and vary depending on how you are currently using the TV Shows information about the current digital broadcast program or content Displays the TV s menu on the screen Lets the 3D source displayed Lets you display video from an external device or computer on the main screen and a TV broadcast in a picture in picture window
51. or AV devices connect RCA audio cables not supplied to R AUDIO L on the rear of the TV set and the other ends to corresponding audio out jacks on an external device When your are connecting a composite AV device to AV IN 1 Y VIDEO connect the video cable Yellow to the AV IN 1 Y VIDEO jack Green Yellow DIGITAL AUDIO OUT OPTICAL Connects to a Digital Audio component AUDIO OUT Connects to the audio input jacks on an Amplifier Home Theater English The Remote Control amp This remote control has Braille points on the Power Channel and Volume buttons and can be used by visually impaired customers Turns the TV on and off Press to directly access channels Press to select additional digital channels being broadcast by the same station For example to select channel 54 3 press 54 then press and 3 Adjust the volume Display the channel list on the screen Display the main on screen menu Quickly select frequently used functions Select on screen menu items and change menu values Return to the previous menu SLEEP Sets the Sleep Timer alg Turns the 3D function on or off Not available CC Controls the caption decoder 10 sis SOURCE rr l MUTE SAMSUNG Display and select the available video Sources Return to the previous channel Cut off the sound temporarily Change channels Switch to the H
52. ow to complete your registration Covered by one or more of the following U S patents 7 295 678 7 460 668 7 515 710 7 519 274 Fi a m The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries Designed with TECHNOLOGY Open Source License Notice Open Source used in this product can be found on the following webpage http opensource samsung com Open Source License Notice is written only English Engish 55 Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care center Country Customer Care Web Site Address Center T CANADA 1 800 SAMSUNG www samsung com ca support English Samsung Electronics Canada Inc 2050 Derry 726 7864 www samsung com ca_fr support French Road West Mississauga Ontario LSN 0B9 Canada U S A 1 800 SAMSUNG _ www samsung com us support Samsung Electronics America Inc 85 726 7864 Challenger Road Ridgefield Park NJ 07660 2015 Samsung Electronics America Inc
53. p Network SmartHub Model Setting SmartHub Setting Widget Mode ON Select the type of the solution server installed in your site for the widget service e Vendor Server In the case of that the special SI vendor of the server is installed Vendor l Solution Type Sener in your site e SINC Server In the case of that the Samsung SINC server is installed in your site N Server URL Setting Widget License Server IP Setting Solution IPTV Mode O Virtual Standby OFF If this item is entered into URL of the solution server can be inputted If this item is entered into URL of the license server can be inputted e ON The IPTV mode that watches the broadcasting through the IP network is enable e OFF The IPTV mode is not disable TV can supply the main feature in the standby mode if The TV mode is set to the Virtual Standby mode e ON The Virtual Standby mode is enable e OFF The Virtual Standby mode is disable When Virtual Standby is On TV power consumption will be 9 5W to 17 4W Depending on ithe size of the TV screen OFF The fast TV booting mode On Off Room Num Setting Set the room number Configures DRM support OFF Turns off DRM support DRM Mode Bredo m eae Select to turn on ne DRM CAS support only Pro idiom Select to turn on Pro ldim CAS support only LYNK DRM PI Select to have the TV support S LYNK DRM CAS and Pro ldiom DRM CAS PI AES Data OxD279 Displays the current state of Pro Idion AES e ON Outp
54. ral instructions For exact instructions see the User manual supplied with the locking device amp The locking device has to be purchased separately amp The location of the Kensington slot may be different depending on the TV model Engish 49 Display Resolution Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity Stand Swivel Left Right Model Name Screen Size Diagonal Sound Output Dimensions WxDxH Body With stand Weight Without Stand With Stand Model Name Screen Size Diagonal Sound Output Dimensions WxDxH Body With stand Weight Without Stand With Stand Specifications 3840 x 2160 50 F to 104 F 10 C to 40 C 10 to 80 non condensing 4 F to 113 F 20 C to 45 C 5 to 95 non condensing 20 60 90 HG55ND890U GO Class 55 Class 49 5 measured diagonally 54 6 measured diagonally 10W x 2 48 9 x 2 6 x 28 2 inches 1242 6 x 67 4 x 718 3 mm 48 9 x 10 9 x 30 3 inches 1242 6 x 277 7 x 770 5 mm 33 9 lbs 15 4 Kg 40 1 lbs 18 2 Kg HG65ND890U 65 Class 64 5 measured diagonally 10W x 2 57 6 x 2 7 x 33 2 inches 1463 4 x 68 8 x 844 2 mm 57 6 x 11 6 x 35 3 inches 1463 4 x 295 1 x 897 0 mm 52 7 lbs 23 9 Kg 61 9 lbs 28 1 Kg amp Design and specifications are subject to change without prior notice This device is a Class B digital apparatus amp
55. re saved Hotel TV Function pecile Category o Select Hospitality mode ie Hospitality Mode Standalone Interactive mode TV works with an SI STB or SBB e Standalone mode TV works alone without an SI STB or SBB e Interactive mode Samsung OCC MTI Nstreams Enseo Cardinal SI Vendor SI Vendor OFF Guestek SeaChange MDC Innvue e Standalone mode OFF Smoovie Set the default values that will be applied when the TV is turned e User Defined Lets you set Power On Channel and Channel Type manually See Power On Channel Last Saved Power On Channel and Channel Type below e Last Saved If you select this item when the TV is turned on it displays the channel it was displaying when it was turned off Power On Channel Num when the TV is turned on it switches automatically to this channel Select channel band AIR analog air band DTV digital air band CATV analog cable band CDTV digital cable band e User Defined Lets you set the Power On Volume manually See Power On Volume below e Last Saved When the TV is turned on it returns to the volume that had been set when the power had been turned off Power On Volume Num The TV turns on with this Volume Level in Stand Alone Hospitality mode MinVolume 0 The minimum Volume Level the user can set in Stand Alone Hospitality mode The maximum Volume Level the user in Stand Alone Hospitality mode Select the input source the TV displays when turn
56. rmation amp The appearance of the TV and its accessories may differ from the illustrations in this manual depending on the TV amp Be careful when you touch the TV if it is on or has been on for a period of time Some parts can be hot Contents e ACE OR PO on eee eee eee 4 Installing the LED TV Stand 5 6 e Usno ihe IV SCONE e asseoir ERRARE EANNA EEEE ENRERE ce en 7 D he CONNECTION PA ssrenenesssstesisetentinssteseeeneneecennns ententes eme test A aT EER REEN TO Eira 8 e he Remote CONIOI Rens at eee dote ere a tacite en 10 Using tho Samsung omat CON ae ne a ten ai 12 Connecung to WIS ING OK RS ass see daaen nanas ae ae ester es ie does mate ces ne ete tetes 1 e COSC the IV 10an SE GPO TR a ad aati tonsa end 19 Connecing ihe Bathroom SCARS S a ea ce ea id ne est 22 Connecting the RUP Remote Jack PACK sccccsassiscsdecnassnacrenedvuvnrtedsdnedarasssurensesasesscndsidneacnassvnetsneusvurtueuianennts 23 oe DONS Hotel Option DE NE serisi EEEE TE 20 DS IFN Ne VV ANIA CITE s cetos scan P enemas a a nn 47 APATITE RSI ON LOCK vnsstntonersbessadenimnrsdinecnsesedestneaniactenedeenimnasediectantnduheneqestiaveneuettesannisietinstearedepnaaes 49 OC OA E pace sicstenrenen bao ance vaigasun tebe piu peahodenaenbeatersnastanenadetis 50 DE 0 Dec SO PER Re Re TRE 3 PSS OS de 53 Symbols Used in this Manual D EJ Indicates that you can press the One Touch Button a TOOLS button on the remote control to use this fu
57. s Smart TV supports the IEEE 802 1 1a b g n communication protocols Samsung recommends using IEEE 802 1 1n Otherwise when you play video over a network connection the video may not play smoothly e To use a wireless network the TV must be connected to a wireless router or modem If the wireless router Supports DHCP the TV can use a DHCP or static IP address to connect to the wireless network e Select a channel that is not currently in use for the wireless router If the channel set for the wireless router is currently being used by another device the result is usually interference and or a communications failure e Most wireless networks have an optional security system To enable a wireless network s security system you need to create a security key using characters and numbers and then enter that key into the router through its menu You then must enter this security key into any other devices you want to connect to the wireless network Network Security Protocols The TV only supports the following wireless network security protocols e Authentication Modes WEP WPAPSK WPA2PSK e Encryption Types WEP TKIP AES In compliance with the newest Wi Fi certification specifications Samsung TVs do not support WEP or TKIP security encryption in networks running in the 802 11n mode If the wireless router supports WPS Wi Fi Protected Setup you can connect the TV to your network using PBC Push Button Configuration or a PIN Personal Ide
58. s automatically after you have executed a Service Reset e Ul Scenario Sel DlagnoaisitoniN If you select TV Reset the TV resets all values to their Self Diagnosis for HTV SW Update factory defaults and then displays the Hospital Plug amp Play Servies Ration OF menu Go to the first Hospital Plug amp Play screen below ATV Cable AGC Gain Default DTV OpenCable AGC Gain Default Sound Bar Out OFF Standby LED ON If you change the country of the Current Location Local Set Local Set Change Local Set if Located in North America Latin America and Europe Warning TV might not function if local set is not correctly configured In other regions Please press SKIP button move to the next step If you select Change When Local set is changed TV Will restart automatically to apply it LAN Current Localset US US Vv ares re List The TV is automatically turned off and on If you don t change the country ya of the Current Location If you select Skip Easy Set Up k If you select this Easy Interactive setup will be started There are Essential Hotel Menu ails CI el Si ene ence If you select setup A p s Standalone Only gt TV will enter the RF mode Standalone Only C4 End Setup If you select Interactive Interactive Only gt Hospitality Option Menu Press Power OFF to exit E appears If you select Standalone Plug amp Play K Auto Program Select your Lan
59. s on Determines the TV s state when power returns after a power failure or after you have unplugged the TV and then plugged it in again e Last Option Returns to its last Power state If it was in Stand by it returns to Standby If it was on it turns on e Power ON When the power returns the TV turns on e Standby When the power returns the TV enters the Standby mode Gives you direct immediate access to some of the Channel menu functions on the user Channel menu such as Auto Program Antenna selection etc Power On Channel Type Power On Volume Last Saved Power On Power On Option Last Option Channel Setup The Channel Editor lets you edit the channels stored in the TV s memory Using Channel Editor you can e Change the channel numbers and names and sort the channels in your desired channel number order Channel Editor e Apply the video mute to channels you select The video mute blanks out the video from a channel and outputs only the sound while displaying a speaker icon on the screen Channel The Channel Editor also lets you view information about each channel easily without your having to display each channel directly If you set Hospitality Mode to Standalone and SI Vendor to Smoovie this item is Channel Bank Editor displayed Lets you edit the channel bank that works with the Smoovie Remote Dynamic SI Refer to page 41 42 e ON Check the DTV Program channel number If Dynamic SI is On
60. shows a sample Channel Editor screen Channel u A 2 Cable mE 10 cw an3 Cable m Air 10 1 CW DTV an4 Cable an 11 HBO BANS Cable mAir 11 1 HBO DTV mA 6 Cable aA 12 NBC an7 mA r 12 1 NBC DTV BAir 7 1 GTA 13 Cable mAs m EN 14 CNN BAir 8 1 FOX DTV mA r 15 Cable PAR Cable mE 16 TNT A Delete E Select All Video Mute On Information Page C Select 4 Tools 9 Return e FN Indicates an analog channel e Channels without an EN are digital channels amp lf Dynamic SI in the Hospitality Option Menu is On Channel Editor will display no digital channels You must set Dynamic SI to Off before you can edit digital channels in Channel Editor e The guide at the bottom of the Channel Editor menu displays the remote buttons you need to press to apply Channel Editor functions Using the remote s up or down arrow key highlight the channel that you want to edit To edit more than one channel move the highlight to a channel and then press the ENTERL key A check will appear in the check box next to the channel Repeat for each channel you want to edit To delete the channel or channels you selected from the channel list press the red button on the remote To delete two or more channels simultaneously select multiple channels in Step 1 and then press the red button on the remote Press the green button on the remote to select all channels To apply the video mut
61. side of the TV 2 Press the MENU button to display the menu UBD Press the A or Y button to select Support and then press the ENTERL button ie C D 3 Press the A or Y button to select Software Update and then press the i ENTERL button The message Scanning for USB This may take more than 1min is displayed 4 The message Upgrade version XXXX to version XXXX The system will be reset after upgrade is displayed Press the lt or gt to select OK and then press the ENTERCS button Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied The TV will turn off and turn on automatically after completing the SW upgrade Please check the SW version after the upgrades are complete A Soundbar AirTrack e Samsung Soundbar AirTrack and Hospitality TVs in 2015 Samsung Soundbar Airlrack and hospitality TVs support the HDMI ARC feature If you connect a compatible Samsung Soundbar Airlrack to a compatible Samsung hospitality TV using a single HDMI cable guests can listen to the TV s sound through the Soundbar AirTrack The item of Soundbar Airlrack Out in Hospitality Option Menu makes you control to where the TV sound is outputted when the TV is turned on If Sound bar Out is On the TV sound is automatically outputted in the Soundbar AirTrack device only whenever TV is turned on If Sound bar Out is Off the TV sound is automatically outputted in the TV speak
62. sung is not liable for product damage or personal injury when a non VESA or non specified wall mount is used or the consumer fails to follow the product installation instructions Donot mount the TV at more than a 15 degree tilt Always have two people mount the TV onto a wall VESA screw hole Standard Screw Product Family TV size in inches specs A B in Length Quantity millimeters Pitch in mm LED TV 400 X 400 4 Do not install your Wall Mount Kit while your TV is turned on It may result in personal injury due to electric shock AS Engish Anti theft Kensington Lock The Kensington Lock is a device you can use to physically fixa TV ete to a location when you use it in a public place The appearance and E locking method may differ from the illustration at right depending on the a manufacturer Refer to the manual provided with the Kensington Lock for additional information on proper use The Kensington Lock is not supplied by Samsung amp Please find the R icon on the rear of the TV A Kensington slot is beside the R icon lt Optional gt To lock the product follow these steps 1 Wrap the Kensington lock cable around a large stationary object such as desk or chair 2 Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable 3 Insert the locking device into the Kensington slot on the product 4 Lock the lock amp These are gene
63. tandalone Only button the Standalone hotel mode is set by default and the Standalone mode is set OSD appears for 3 seconds TV enters RF mode automatically after displaying the Standalone mode is set OSD for 3 seconds lf you select the Interactive mode the Interactive Setup Menu is displayed Press the power off key to exit from the Interactive menu Ifyou select the Standalone Plug amp Play mode the Select Menu Language OSD appears LocalSet Initially highlighted US Ifyou press the Enter key after selecting Change you can change the country Ifthe country is changed the TV automatically turns off and on lf you select the Interactive mode the Interactive Setup Menu is displayed Press the power off key to exit from the Interactive menu If you select the incorrect country execute TV Reset again after entering the System section of the Hotel Menu Select Menu Language OSD Ifyou select Standalone from the Select Hotel TV Mode OSD the Select Menu Language OSD appears Initially highlighted English Display time OSD time out and operation are the same as Samsung s consumer TV models lf you press the Enter key the Picture Mode OSD appears Picture Mode OSD Initially highlighted Standard The TV displays the Picture Mode OSD where you can choose the Dynamic or a Standard Picture mode Auto Search Mode OSD Ifyou press the Enter key the TV automati
64. ut of Pro ldiom AES log is enable Fe aes OFF Output of Pro ldiom AES log is disable View PIAES Log Ifthisitemis entered into the Pro Idiom AES log is displayed English 29 Hotel TV Function Category nial value Description J Enter Self Diagnosis Menu Picture Test Use to check for picture problems If the problem appears in the Self Diagnosis test picture select Yes and follow the directions on the screen for TV e Sound Test Use the built in melody sound to check for sound problems If the problem occurs during the test select Yes and follow the directions on the screen Lets you check the state of Pro ldiom and its communication with the SI STB or SBB If you have any problems with the Pro idiom encryption channel or the communications with the SI STB or SBB use this diagnosis function If Pro ldiom DTV Channel Key Loss appears to have failed and the Pro ldim encryption channel has failed to play content first check the broadcasting systems related to Pro ldiom encryption If your broadcasting system does not have a problem contact Samsung Service If STB SI Vendor Setting appears to have failed and communication with the SI STB or SBB has failed first check your SI STB or SBB If your SI STB or SBB does not have a problem contact to Samsung Service SW Update Lets you upgrade the TV SW with a USB memory stick See Page 40 Lets you check the state of the TV picture by displaying picture test
65. ve the Samsung Smart Control The pointer on the screen moves in the direction you moved the Samsung Smart Control Press the touch pad to run the focused item Press and hold the touch pad to display the Context Sensitive Menus Renee AV lt gt Moves the cursor selects the on screen menu items and EXIT SMART HUB changes the values seen on the TV s menu lt tc gt Il 3D SLEEP cc RETURN Returns to the previous menu SMART HUB Brings up Smart Hub applications To exit an application quickly press the button GUIDE Displays the EPG Electronic Program Guide Use these buttons with a specific feature and according to the directions on the TV s screen MENU Displays the menu on the screen HOME Press to display the HOME menu or the REACH menu or the SINC menu 3D Turns the 3D function on or off Not available SLEEP Press to set when TV will be turned off after a preset period of time CC Controls the caption decoder and displays captions on the screen ALARM Press to set when TV will be turned on for the alarm 12 Engish Installing Batteries into the Samsung Smart Control To use the Samsung Smart Control insert the batteries into the device referring to the figure below 1 LAG f Gently pull on the battery cover s notch and then remove the cover completely once it comes loose Insert 2 AA alkaline batteries making sure to align the positive and negative polarities correctly

LED TV - SAMSUNG DISPLAY

Contents

Download Pdf Manuals

Related Search

Related Contents