ZT-600-690 V5
Contents
1. PHOTO 1 PHOTO 2 PHOTO 3 4 To install footrests place left right footrest over left right SEE PHOTO 4 pegs at a 90 angle to the frame turn forward 90 to lock footrests into place SEE PHOTO 5 5 Legrest adjustment for optimum comfort it is important to attain the correct leg position The footrests have been designed so that they can be extended into a number of fixed positions by releasing the bolt at the base of the legrest This lengthens the legrest into various positions Once the correct length has been set tighten up the bolt 6 Anti tips stops the wheelchair tipping backwards e g when mounting a kerb Do not raise the front castors by pushing down on the push handles as this could result in damage to the wheelchair 7 Lap Belt to be used to restrain the wheelchair occupant during normal daily use adjust lap belt to fit occupant PHOTO 4 l PHOTOS 7 Brake Operation amp Brake Maintenance The brakes are preset and adjustment should only be necessary if the brakes no longer function correctly To apply the parking brakes push the plastic brake handle towards the front of the wheelchair Push the handle back to release the brakes SEE PHOTO S 6 AND 7 Adjustment is made to the brake by loosening the two bolt and then sliding the brake unit along the frame till the space between the wheel and park brake is between 3mm and 5mm Retighten the bolt heads To operate the attendant brakes squeeze the brake lever A2. FOLDING HEAVY DUTY ZT 600 690 BLACK WHEELCHAIR USER MANUAL CE IMPORTANT Read instructions before use Available in Metallic Black Weights Dimensions User Weight Length inc Footrests 110cm 4314 Width 72cm 28 Height 92cm 36 Seat Height 50cm 1934 Seat Width 51cm 20 Seat Depth 41 8cm 162 Width Between Arms 51cm 20 Maximum User Weight 150kgs 23 4stone Seat to Footrest Adj 39cm 15 49cm 19 Net Weight 22 2kg 48 9lbs Weight inc Footrests 24kg 52 9lbs Z Tec Mobility Unit 1B Albion Works Moor Street Brierley Hill West Midlands DY5 3SZ MAY 08 5 Contents l Introduction 7 Brake Operation amp Brake Maintenance 2 Indications For Use 8 Transportation 3 Contraindications 9 Warnings 4 Cautions 10 Warranty 5 Parts Description 11 Weights Dimensions front page 6 Assembling The Wheelchair 1 Introduction The ZT 600 690 is a self propelled wheelchair in steel with lap belt and is available in metallic black The wheelchairs are suitable for everyday indoor amp outdoor use The wheelchairs are manufactured to the highest quality standards amp are CE marked as Medical Devices 2 Indications For Use This wheelchair is intended for the temporary transportation of a single occupant who has a walking disability The wheelchair is intended to be self propelled or by an attendant who is suitably able to control and manoeuvre the wheelchair and who has ga
3. and to lock into place push the spring loaded button B in and then release to total release the brake squeeze the lever and the spring loaded button will pop out the wheelchair is now free to push SEE PHOTO 8 PHOTO 8 PHOTO 6 BRAKE ON MAY 08 5 8 Transportation 1 To fold the wheelchair ensure that the footrests are in the forward position and that the metal footplates are flipped up or completely remove footrests by pressing the footrest release lever amp swing 90 outwards and lift off 2 Stand to the side of the wheelchair take the front amp back centre of the seat upholstery in each hand and pull the seat in an upward motion The wheelchair will naturally fold up 3 To remove the under desk arms press the button on the armrest and lift the arm upwards to clear the locating holes SEE PHOTO S 9 AND 10 PHOTO 9 PHOTO 10 9 Maintenance Ensure the wheelchair is used only as an aid for mobility Ensure the wheelchair is kept clean Wipe down with a damp cloth on a monthly basis Check the moving parts e g wheels legrests amp folding back monthly Ensure that the park attendant brakes are working correctly All the fasteners screws nuts amp bolts are to be checked monthly to ensure they are securely tightened Check that the front wheels swivel freely Withdraw from use if they do not work Only use an approved Z Tec dealer for any maintenance amp repairs on your wh
4. eelchair Also available for the ZT 600 690 are e IV Pole e ZTS 622 F Elevating Legrest 10 Warranty To improve the safety amp lifespan of your wheelchair it is recommended that you have it serviced on a annual basis by an authorised dealer Z Tec wheelchairs are guaranteed for 12 months from the date of purchase this warranty is not transferable Should any part of the wheelchair require repair or full or part replacement as a result of a manufacturing or material defect within the warranty period parts will be supplied free of charge The guarantee excludes tyres amp all items that have been subjected to undue wear amp misuse Under normal circum stances no responsibility will be accepted where the wheelchair has not been maintained in accordance with the manufactures recommendations This does not affect your statuary rights If any other issues arise that are not mentioned in this user manual please write to the address below Disposal Contact your local authority to dispose of the wheelchair when no longer required Z Tec Mobility Unit 1B Albion Works Moor Street Brierley Hill West Midlands DY5 3SZ MAY 08 5
5. ets or third parties on the wheelchair as this will add excess weight and cause instability to the wheelchair Whenever the wheelchair is brought to rest this should be on level ground and both parking brakes should always be firmly engaged Transfers of the occupant to and from the wheelchair should always take place on level ground in a safe environ ment Pay particular attention when using the wheelchair in a public traffic area and never leave the occupant in the wheel chair unsupervised It is advisable to plan your wheelchair route beforehand and take particular care in wet or icy weather or if traversing soft ground Look out for kerbs and uneven surfaces Obstacles should be avoided as hitting them may displace the occupant as well as cause damage to the wheelchair ATTENTANT BRAKE LEVER REMOVABLE SIDE SKIRT LAP BELT 60cm REAR MAG LEG REST frp RELEASE LEVER WHEELS WITH A We wie m SOLID TYRES e aN LEG REST BRAKE LEVER CALF STRAP METAL 20cm FRONT WHEEL FOOT PLATE MAY 08 5 5 Parts Description PADDED ARMREST 6 Assembling the Wheelchair Remove all packaging from the wheelchair Fold out the wheelchair by standing at the front of the chair put both hands onto the seat upholstery and push down until the seat is completely open SEE PHOTO S 1 AND 2 3 To fold the wheelchair stand at the side and from the centre of the upholstery lift upwards letting the wheelchair fold naturally SEE PHOTO 3 NOK
6. ined familiarity with the proper operation of the wheelchair its brakes motion and handling 3 Contraindications The wheelchair is not for use by occupants weighing more than 150 kg 23 stone This wheelchair is not intended for use in a motor vehicle 4 Cautions The attendant who is to operate the wheelchair should familiarise themselves with the operation of the wheelchair and its parking brakes both before and after an occupant is seated and the wheelchair is used Note that the parking brakes are oper ated by hand See section on brakes in this manual The attendant should consider their own wellbeing before operating the wheelchair they should understand their limitations and strength and not attempt anything that is beyond their capability so as to ensure the wheelchair occupant s and their own safety The attendant should ensure that the handles of the wheelchair are firmly held to control the wheelchair while it is in motion and while the parking brakes are not applied Attendants should take particular care if gloves are worn as these may restrict their grip on the handles of the wheelchair Avoid the occupant changing their centre of gravity by leaning or reaching to one side or the other from the wheelchair as this upper body movement of the occupant may cause the wheelchair to tip over When ascending slopes with the wheel chair ensure that the occupant s body is leant slightly forward Do not carry extra weight such as bags p
Download Pdf Manuals
Related Search