to user guide
Contents
1. Treehouse Labs LLC2. SB power supply The case will charge along with your phone To sync to iTunes while in its BiKN case Simply connect your iPhone to your computer running iTunes like you would if you were charging see above To charge your BiKN tags Push the latch up on the colored tag cap and slide the cap off Then connect the Micro USB cable to the tag and the other end toa PC USB power supply or iPhone charging brick removing bikn tag cap Push up on tiny latch while sliding cap right Thank you for buying BiKN BiKN extends the reach of your iPhone through an app that enables your phone and a case that connects the phone to up to 256 little BIKN tags that you can use to create a wireless network for your stuff BiKN can also be used to create a wireless network for your stuff without an iPhone Just read on Using BiKN without an iPhone BiKN tags can be set up to find other tags without the use of an iPhone Please note that advanced features like exact distance direction and leashing require an iPhone and BiKN iPhone case Step 1 Make sure tags have charge Before starting please be sure your tags are either charged or are plugged into the Micro USB charger To access the charging plug push the latch on the tag cap and slide the cap off Then connect the Micro USB cable to a PC USB power supply or iPhone Charging brick Push and release the small button on the back of one of the tags with a paper clip or a to
3. Using BiKN is a simple 1 2 3 process Clip On Get Connected Charge amp Sync The app will walk you step by step as you attach BiKN tags to the things you want to keep up with 01 clip on Put on your BiKN Case BiKN for iPhone 4 BiKN for iPhone 4 protects your phone Just clip your iPhone into the base case and then push it into the color slider BiKN for iPhone 3GS To attach the BiKN case to your iPhone 3GS plug the bottom of the base case into the connector on the bottom of your phone Then slide the top clip down into the ridges of your case base Qbikn p 02 a na Download the BiKN App When you open your iPhone you should get an Application Not Installed message Tap Yes and download the BiKN app The app will take you through the remaining steps for setting up and controlling your BIKN network 203 Se Micro USB charges phone amp case at the same time You don t have to remove your new BiKN case to stay powered up or in sync just use the Micro USB cable provided in this package The good news the BiKN app will tell you when you need a charge And even if your phone is dead BiIKN keeps working To charge your iPhone in its BiKN case Attach the Micro USB cable to the USB port on your iPhone through the tiny USB slot in your BiKN case Then connect the other end of the cable into the charger that came with your iPhone a computer or another U
4. ce by the user Any changes or modifications could void the user s authority to operate the equipment See 47 CFR Sec 15 21 Warranty BIKN WILL WARRANTY THE PRODUCT FOR THE PERIOD OF 1 YEAR FROM THE TIME OF PURCHASE IN THE UNITED STATES FROM DEFECTS IN MATERIALS AND WORKMANSHIP WITH THE FOLLOWING EXCLUSIONS NORMAL WEAR AND TEAR PERIODIC MAINTENANCE REPAIR AND R M IZED_ ADJUSTMENT ALTERATION OR MODIFICATION IN ANY WAY BY THIS INCLUDES PRODUCTS WITH EVIDENCE OF TAMPERING SUCH AS BROKEN SEALS OR MISMATCHED SERIAL NUMBERS THIS WARRANTY EXTENDS TO YOU ONLY IF YOU ARE THE END USER WITH THE ORIGINAL PURCHASE RECEIPT BIKN WILL AT ITS OPTION REPAIR REPLACE OR REFUND THE PURCHASE PRICE OF ANY PRODUCT THAT DOES NOT CONFORM TO THIS WARRANTY WE MAY USE FUNCTIONALLY EQUIVALENT RECONDITIONED REFURBISHED PRE OWNED OR NEW UNITS To obtain warranty service please visit www bikn com support Product Specification Tag Battery Life Up to 2 months depending on usage Case Battery Life Up to 3 weeks depending on usage Tag Charge Time 1 5 2 hrs Case Charge Time 1 5 2 hrs Paging range Up to 500 feet outdoors indoors results will vary Radio 802 15 4 2 4 GHz Battery Type Lithium ion Polymer Storage Usage temperature 20 to 60C 4 to 140F Your BiKN case will charge even when your iPhone is loaded in it Your BiKN case will start charging after your iPhone is 90 charged FC cs please recycle Copyright 2011
5. ermanently reduce battery life e Only charge with USB compliant power sources between 4v and 6v Children BiKN is not a toy Care must be used when using around very small children to ensure they do not choke on the tag cap Care e f the device overheats or has been fully dropped into water please discontinue use and contact BiKN e Prevent excessive moisture from coming into contact with the product e Keep BiKN away from open flames like cooking burners The battery could explode when in contact with fire Device Disposal and Recycling Please do not dispose of BiKN devices in a fire or with your household waste These items should be disposed of in accordance to your local recycling rules so please contact your local recycling center for information on proper disposal Or you may return unwanted devices to BIKN using the procedures found at www BiKN com support Software Copyright Notice This product includes software copyrighted by Treehouse Labs LLC and InMotion Software LLC This software may not be modified reverse engineered distributed or reproduced in any manner to the extent allowed by law FCC Notice to Users These devices comply with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation See 47 CFR Sec 15 19 3 Thi
6. othpick BiKN will then try to find all other tags in range After pushing the join button of one tag the light of the other tag you are joining it to should start flashing Once that light is flashing push the join button of the other tag until you hear three beeps The two tags are now joined You can do this with up to 254 other tags Tags only know about other tags that they have directly joined Paging When you press and hold the main button on the BiKN tag it will page all the tags to which it has been joined The red light indicates that it is searching for tags The process of finding the tags can take a few seconds A green light indicates that it has found at least one other You should hear that other tag s alarm sounding Clearing connections To erase all connections from a tag push and hold the rear join button until you hear the tag beep About 8 seconds This will erase all connections to the tag and restore factory settings Step 2 Press the join button on one of the tags Step 3 Press the join button on the tag to be joined Getting Help If you are having difficulties please visit www BiKN com support for help Safety Regulatory amp Legal Battery Use e Do not store or use BiKN tags or cases at temperatures below 20 degrees C 4 F or above 60 degrees C 140 F e Do not open or mutilate the battery e Storing fully charged BiKN tags or cases at high temperatures may p
7. s equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and the receiver e Connect the equipment to an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help This device and its antenna must not be collocated or operated in conjunc tion with any other antenna or transmitter other than the Apple iPhone To comply with FCC RF exposure requirements only use supplied antenna Any unauthorized modification to the antenna or device could void the user s authority to operate this device BiKN has not approved any changes or modifications to this devi
Download Pdf Manuals
Related Search