User Manual - Emmegi Ricambi SpA
Contents
1. Page 3 For Windows XP Server 2003 XP x64 Server 2003 x64 1 Insert the Driver CD into the CD ROM drive 2 At the Found New Hardware Wizard select Install the software automatically Recommended then click Next 3 If the Hardware Installation window pops up click Continue Anyway then click Finish to complete the driver installation For Windows Vista Vista x64 1 Insert the Driver CD into the CD ROM drive 2 At the Found New Hardware Wizard select Locate and install driver software recommended 3 Click Next to continue to setup 4 The Add New Hardware Wizard will now ask you Would you like to install this device software Click Install to continue to setup 5 Click Close to complete the driver installation Page 4 To Verify Windows Driver Installation Click on the Device Manager tab in System Properties which you access from the Windows Control Panel You should see one PCI Express ECP Parallel Port installed under Ports COM amp LPT item Page 52. Parallel I O 1 port PClexpress Add On card User Manual DS 30020 All brand names and trademarks are properties of their Respective owners Features and Benefits Features Compliant with PCI Express Base spec 1 1 Compliant with PCI Power Management 1 2 Add one JEEE1284 Parallel port on system Supports Standard Parallel Port SPP Enhanced Parallel Port EPP amp Enhanced Capability Port ECP Data transfer rate up to 2 5Mbps Bus PCI Express x1 Connectors 1 x DB25 female connector System Requirements e Windows 7 Vista XP 2000 PCI Express enabled system with an available PCI Express slot Page 2 Hardware Installation 1 Turn Off the power to your computer 2 Unplug the power cord and remove your computer s cover 3 Remove the slot bracket from an available PCIe slot 4 To install the card carefully align the card s bus connector with the selected PCIe slot on the motherboard Push the board down firmly 5 Replace the slot bracket s holding screw to secure the card 6 Replace the computer cover and reconnect the power cord Driver Installation For Windows 2000 1 Insert the Driver CD into the CD ROM drive 2 At the Found New Hardware Wizard click Next 3 Select Search for a suitable driver for my device recommended and click Next 4 Check CD ROM drives uncheck the other boxes then click Next 5 Click Next 6 Click Finish to complete the driver installation
Download Pdf Manuals
Related Search