Zanussi ZRA40100WA User Manual
Contents
1. User manual Refrigerator U S R MANUAL ZRA40100WA ZAN USSI Contents Safety instructions ________ Product description Operation EISTUSO o o e S2 LL a Daily use _______2__2 2 2 2 Helpful hints and tips QI QI BD A Safety instructions In the interest of your safety and to ensure the correct use before installing and first using the appliance read this user manual carefully in cluding its hints and warnings To avoid unnec essary mistakes and accidents it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features Save these instructions and make sure that they remain with the appliance if it is moved or sold so that everyone using it through its life will be properly informed on ap pliance use and safety For the safety of life and property keep the pre cautions of these user s instructions as the manufacturer is not responsible for damages caused by omission Children and vulnerable people safety This appliance is not intended for use by per sons including children with reduced physi cal sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction con cerning use of the appliance by a person re sponsible for their safety Children should be supervised to ensure that they do not play with the appliance Keep all packaging well away from children There is risk2. of interior lighting This appliance is heavy Care should be tak en when moving it Do not remove nor touch items from the freezer compartment if your hands are damp wet as this could cause skin abrasions or frost freezer burns Avoid prolonged exposure of the appliance to direct sunlight Bulb lamps if foreseen used in this appli ance are special purpose lamps selected for household appliances use only They are not suitable for household room illumination www zanussi com Daily use Do not put hot pot on the plastic parts in the appliance Do not store flammable gas and liquid in the appliance because they may explode Appliance s manufacturers storage recom mendations should be strictly adhered to Refer to relevant instructions Care and cleaning Before maintenance switch off the appliance and disconnect the mains plug from the mains socket Do not clean the appliance with metal ob jects Regularly examine the drain in the refrigerator for defrosted water If necessary clean the drain If the drain is blocked water will col lect in the bottom of the appliance Installation Important For electrical connection carefully follow the instructions given in specific paragraphs Unpack the appliance and check if there are damages on it Do not connect the appliance if it is damaged Report possible damages immediately to the place you bought it In that case retain packing It is advisa
3. Regulator is set to low temper ature and the appliance is fully loaded the compressor may run continuously causing frost or ice on the evaporator If this happens set the Temperature Regulator toward warm er settings to allow automatic defrosting and so a saving in electricity consumption Hints for fresh food refrigeration To obtain the best performance do not store warm food or evaporating liq uids in the refrigerator do cover or wrap the food particularly if it has a strong flavour Care and cleaning A Caution Unplug the appliance before carrying out any maintenance operation This appliance contains hydrocarbons in its cooling unit maintenance and recharg ing must therefore only be carried out by au thorized technicians Periodic cleaning The equipment has to be cleaned regularly clean the inside and accessories with luke warm water and some neutral soap regularly check the door seals and wipe clean to ensure they are clean and free from debris rinse and dry thoroughly Important Do not pull move or damage any pipes and or cables inside the cabinet Never use detergents abrasive powders highly perfumed cleaning products or wax polishes to 6 position food so that air can circulate freely around it Hints for refrigeration Useful hints Meat all types wrap in polythene bags and place on the glass shelf above the vegetable drawer For safety store in this way only one o
4. ance if the appliance is positioned below an overhanging wall unit the minimum distance between the top of the cabinet and the wall unit must be at least 100 mm Ideally however the appliance should not be posi tioned below overhanging wall units Accurate levelling is ensured by one or more adjustable feet at the base of the cabinet Warning It must be possible to disconnect the appliance from the mains power supply the plug must therefore be easily accessible after installation www zanussi com Electrical Connection Caution Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person Warning This appliance must be earthed The manufacturer declines any liability should these safety measures not be observed N Important The wires in the mains lead are coloured in accordance with the following code A Green and Yellow Earth C Brown Live D Blue Neutral As the colours of the wires in the mains lead of this appliance may not correspond with the col oured markings identifying the terminals in your plug proceed as follows 1 Connect the wire coloured green and yel low to the terminal marked either with the letter E or by the earth symbol or col oured green and yellow 2 Connect the wire coloured blue to the ter minal either marked with the lette
5. ble to wait at least four hours be fore connecting the appliance to allow the oil to flow back in the compressor Adequate air circulation should be around the appliance lacking this leads to overheat ing To achieve sufficient ventilation follow the instructions relevant to installation Wherever possible the back of the product should be against a wall to avoid touching or catching warm parts compressor condens er to prevent possible burn The appliance must not be located close to radiators or cookers Make sure that the mains plug is accessible after the installation of the appliance Connect to potable water supply only If a water connection is foreseen Service ther its refrigerant circuit or insulation materials Any electrical work required to do the servic The appliance shall not be discarded together ing of the appliance should be carried out by with the urban refuse and rubbish The insula a qualified electrician or competent person tion foam contains flammable gases the appli ance shall be disposed according to the appli cable regulations to obtain from your local au thorities Avoid damaging the cooling unit es pecially at the rear near the heat exchanger The materials used on this appliance marked by This appliance does not contain gasses the symbol 5 are recyclable which could damage the ozone layer in ei Product description This product must be serviced by an author ized Service Cent
6. e appliance over the motor compressor where it evaporates What to do if Warning Before troubleshooting disconnect the mains plug from the mains socket Only a qualified electrician or competent person must do the troubleshooting that is not It is important to peri odically clean the de frost water drain hole E m in the middle of the A refrigerator compart ment channel to pre vent the water over flowing and dripping onto the food inside Important There are some sounds during normal use compressor refrigerant circulation in this manual Prem TIN NTC The appliance does not operate The lamp does not operate The lamp does not work The compressor operates continually Water flows on the rear plate of the refrigerator Water flows into the refrig erator www zanussi com The appliance is switched off The mains plug is not connected to the mains socket correctly The appliance has no power There is no voltage in the mains socket The lamp is in stand by The lamp is defective The temperature is not set correct ly The door is not closed correctly The door has been opened too fre quently The product temperature is too high The room temperature is too high During the automatic defrosting process frost defrosts on the rear plate The water outlet is clogged Switch on the appliance Connect the mains plug to the mains socket correc
7. ening direction of the door do these steps Remove the plug from the power socket Tilt back the appliance carefully so that the compressor cannot touch the floor Remove the plinth 1 Remove the cap 2 and position it on the opposite side Unscrew the hinge 3 and remove the door Unscrew the lower pin and the washers 3 Position the pin and the washers 6 on the opposite side 7 Unscrew the other hinge 5 www zanussi com Unscrew the upper pin 4 and screw it on the opposite side 5 Refit the door Refit and screw both lower hinges Refit the plinth 8 TT Stand the appliance upright Unscrew the handle 1 and fix it on the op posite side 2 Re insert the cover pins 3 on the opposite side Do a final check to make sure that All screws are tightened 11 The edges of the doors run parallel to the side edge of the appliance The magnetic seal adheres to the cabinet The door opens and closes correctly It is advisable to wait at least four hours before connecting the appliance to allow the oil to flow back in the compressor If the ambient temperature is cold i e in Win ter the gasket may not fit perfectly to the cabi Environmental concerns A The symbol on the product or on its packaging indicates that this product may not be treated as household waste Instead it s
8. es unless they are approved for this purpose by the manufacturer Do not damage the refrigerant circuit The refrigerant isobutane R600a is con tained within the refrigerant circuit of the ap pliance a natural gas with a high level of en vironmental compatibility which is neverthe less flammable www zanussi com During transportation and installation of the appliance be certain that none of the com ponents of the refrigerant circuit become damaged If the refrigerant circuit should become dam aged avoid open flames and sources of ignition thoroughly ventilate the room in which the appliance is situated It is dangerous to alter the specifications or modify this product in any way Any damage to the cord may cause a short circuit fire and or electric shock Warning Any electrical component pow er cord plug compressor must be re placed by a certified service agent or qualified service personnel to avoid hazard 1 Power cord must not be lengthened 2 Make sure that the power plug is not squashed or damaged by the back of the appliance A squashed or damaged power plug may overheat and cause a fire 3 Make sure that you can come to the mains plug of the appliance 4 Do not pull the mains cable 5 If the power plug socket is loose do not insert the power plug There is a risk of electric shock or fire 6 You must not operate the appliance without the lamp cover if foreseen
9. hould be taken to the appropriate collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent 12 net In that case wait for the natural fitting of the gasket In case you do not want to carry out the above mentioned operations contact the nearest After Sales Service Force The After Sales Service specialist will carry out the reversibility of the doors at your cost potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product For more detailed information about recycling of this product please contact your local council your household waste disposal service or the shop where you purchased the product www zanussi com www zanussi com 13 14 www zanussi com www zanussi com 15 www zanussi com shop ES 8 i ZN fN 280151038 A 492012
10. ing water outlet to the evaporative tray Set a higher temperature Set a lower temperature Refer to Closing the door Let the product temperature de crease to room temperature before storage Store less products at the same time Make sure that there is cold air circu lation in the appliance EN Q Closing the door 1 2 Clean the door gaskets If necessary adjust the door Refer to In stallation If necessary replace the defective door gaskets Contact the Service Center Dimension Height Width Depth Voltage Frequency 1850 mm 600 mm 660 mm 230 240 V 50 Hz www zanussi com The technical information are situated in the rat ing plate on the internal left side of the appli ance and in the energy label Installation Caution Read the Safety Information carefully for your safety and correct operation of the appliance before installing the appliance Positioning Install this appliance at a location where the ambient temperature corresponds to the cli mate class indicated on the rating plate of the appliance Climate Ambient temperature class SN 10 C to 32 C N 16 C to 32 C ST 16 C to 38 C T 16 C to 43C Location The appliance should be installed well away from sources of heat such as radiators boilers direct sunlight etc Ensure that air can circulate freely around the back of the cabinet To ensure best perform
11. of suffocation f you are discarding the appliance pull the plug out of the socket cut the connection cable as close to the appliance as you can and remove the door to prevent playing chil dren to suffer electric shock or to close themselves into it If this appliance featuring magnetic door seals is to replace an older appliance having Care and cleaning ________ _ 6 What to do if 2 7 Technical data ________________ 8 Installation L__________________ 9 Environmental concerns 12 Subject to change without notice a spring lock latch on the door or lid be sure to make that spring lock unusable be fore you discard the old appliance This will prevent it from becoming a death trap for a child General safety A Warning Keep ventilation openings in the appliance en closure or in the built in structure clear of ob struction The appliance is intended for keeping food stuff and or beverages in a normal household and similar applications such as staff kitchen areas in shops offices and other working environments farm houses and by clients in hotels mo tels and other residential type environ ments bed and breakfast type environments catering and similar non retail applications Do not use a mechanical device or any artifi cial means to speed up the thawing process Do not use other electrical appliances such as ice cream makers inside of refrigerating applianc
12. r N or coloured black 3 Connect the wire coloured brown to the terminal either marked with the L or col oured red 4 Check that no cut or stray strands of wire is present and the cord clamp E is secure over the outer sheath 5 Make sure the electricity supply voltage is the same as that indicated on the appli ance rating plate 6 Switch on the appliance 10 The appliance is supplied with a 13 amp plug fitted B In the event of having to change the fuse in the plug supplied a 13 amp ASTA ap proved BS 1362 fuse must be used Warning A cut off plug inserted into a 13 amp socket is a serious safety shock hazard Ensure that it is disposed of safely Rear spacers You can find the two spacers in the bag with documentation Do these steps to install the spacers 1 Release the screw 2 Engage the spacer below the screw 3 Turn the spacer to the right position 4 Tighten again the screws a N s Levelling Accurate levelling prevents the vibration and noise of the appliance during operation To ad just the height of the appliance loosen or tight en the two adjustable front feet www zanussi com Door reversibility Important To carry out the following operations we suggest that this be made with another person that will keep a firm hold on the doors of the appliance during the operations To change the op
13. r two days at the most Cooked foods cold dishes etc these should be covered and may be placed on any shelf Fruit and vegetables these should be thor oughly cleaned and placed in the special draw er s provided Butter and cheese these should be placed in special airtight containers or wrapped in alumi nium foil or polythene bags to exclude as much air as possible Milk bottles these should have a cap and should be stored in the bottle rack on the door Bananas potatoes onions and garlic if not packed must not be kept in the refrigerator clean the interior as this will damage the surface and leave a strong odour Clean the condenser black grill and the com pressor at the back of the appliance with a brush This operation will improve the perform ance of the appliance and save electricity con sumption Important Take care of not to damage the cooling system Many proprietary kitchen surface cleaners con tain chemicals that can attack damage the plastics used in this appliance For this reason it is recommended that the outer casing of this appliance is only cleaned with warm water with a little washing up liquid added Defrosting the refrigerator Frost is automatically eliminated from the evap orator of the refrigerator compartment every time the motor compressor stops during nor www zanussi com mal use The defrost water drains out through a drain hole into a special container at the back of th
14. re and only genuine spare parts must be used Environment Protection Glass shelves Snack shelf Thermostat 6 Vegetable drawer Door shelves Rating plate Bottle shelves Operation Switching on Turn the Temperature regulator clockwise to a Insert the plug into the wall socket medium setting 4 www zanussi com Switching off To turn off the appliance turn the Temperature regulator to the O position Temperature regulation The temperature is automatically regulated To operate the appliance proceed as follows turn the Temperature regulator toward lower settings to obtain the minimum coldness turn the Temperature regulator toward higher settings to obtain the maximum coldness A medium setting is generally the most suitable However the exact setting should be chosen keeping in mind that the temperature inside the appliance depends on First use Cleaning the interior Before using the appliance for the first time wash the interior and all internal accessories with lukewarm water and some neutral soap so Daily use Movable shelves The walls of the re frigerator are equip ped with a series of runners so that the shelves can be posi tioned as desired Helpful hints and tips Normal Operating Sounds You may hear a faint gurgling and a bubbling sound when the refrigerant is pumped through the coils or tubing This is correct www zanussi com
15. room temperature how often the door is opened the quantity of food stored the location of the appliance Important If the ambient temperature is high or the appliance is fully loaded and the appliance is set to the lowest temperatures it may run continuously causing frost to form on the rear wall In this case the dial must be set to a higher temperature to allow automatic defrosting and therefore reduced energy consumption as to remove the typical smell of a brand new product then dry thoroughly Important Do not use detergents or abrasive powders as these will damage the finish Positioning the door shelves To permit storage of food packages of var ious sizes the door shelves can be placed at different heights Gradually pull the shelf in the direction of the arrows until it comes free then re position as required When the compressor is on the refrigerant is being pumped around and you will hear a whirring sound and a pulsating noise from the compressor This is correct The thermic dilatation might cause a sudden cracking noise It is natural not dangerous physical phenomenon This is correct When the compressor switches on or switches off you will hear a faint click of the temperature regulator This is correct Hints for energy saving Do not open the door frequently or leave it open longer than absolutely necessary If the ambient temperature is high and the Temperature
16. tly Connect a different electrical appli ance to the mains socket Contact a qualified electrician Close and open the door Refer to Replacing the lamp Set a higher temperature Refer to Closing the door Do not keep the door open longer than necessary Let the product temperature de crease to room temperature before storage Decrease the room temperature This is correct Clean the water outlet DCI TI sou Products prevent that water flows into the water collector Water flows on the ground the compressor The temperature in the ap pliance is too low correctly The temperature in the ap pliance is too high correctly The door is not closed correctly The product temperature is too high Many products are stored at the same time There is no cold air circulation in the appliance Replacing the lamp 1 Disconnect the appliance 2 Push the movable part to unhook the lamp cover 1 3 Remove the lamp cover 2 4 Replace the lamp with one of the same power and specifically designed for do mestic appliances only 5 Install the lamp cover 6 Connect the appliance 7 Open the door Make sure that the lamp comes on Technical data The melting water outlet does not flow in the evaporative tray above The temperature regulator is not set The temperature regulator is not set Make sure that products do not touch the rear plate Attach the melt
Download Pdf Manuals
Related Search