Sound Skulptor MP512 User manual
Contents
1. pping indicator POL Reverses phase in the right position 48V Activates phantom power In the right position for static microphones Do not forget to mute monitoring before switching Copyright 2013 SoundSkulptor2. www soundskulptor com Document revision Last modification 2 1 1 13 Sound Skulptor MP5 2 User manual c a LOW gt HIGH Mi POL g REV ABV e ON f at HIGH NJ 1 Sound Skulptor Installation The lunchbox or rack hosting the preamp must be installed in a well ventilated area Class A circuits are known be produce heat Do not omit the 2 fixing screws on the module front plate before moving It Is pretty heavy and the weight would put too much pressure on the back connector Connections The preamp connects to the rear temale XLR tor the microphone input and to the rear male XLR for output The XLR pinout 1s as follows Pin Ground Fin ee ina Pin 3 Signal A Direct Instrument high impedance input is available on the front A relay is automatically switched when a jack is inserted It connects the DI signal to the input transtormer of the preamp GAIN The GAIN potentiometer action is split in 3 areas by a toggle switch LOW inserts a 2OdB pad before the input transtormer MID and HIGH allows precise potentiometer setting in medium to high gains PAD The PAD potentiometer placed after the output transformer can further attenuate the signal by GdB It can be used to reduce a very loud signal or to allow saturating the pre for special effect It should be set to maximum for normal use LED When green the LED gives feedback about the preamp activity when red It 1s a cli
Download Pdf Manuals
Related Search