wally 336
Contents
1. ES 5000 ALON co Sound controlled run in Stand Alone 00 83 sensitivity 1 Standard dimming option pDIMR Hifir Mop ide Linear dimming option MOD3 103 Acquiescence dimming option OTHR EBOc E 597 IGFF Change DMX address via external controller R HIGH HI SH AM Fan s mode select AUTO ALIED LOAD L 280 5 5 Restore factory default settings VER UE r V 1 0 Utd Display s current software version Remark 1 You can control the fixture no matter in which mode When the DMX signal is out the fixture will keep the last status of the DMX and the manual mode would be unavailable 2 Instruction for the SPED and the FADE function in CHAS SPEED The time one step would stay FADE The time that one step altered to next step 212 303 1 0 Example we set SPEED 1second and FADE 15 the Ist step is Red 100 open the 2nd step is green 100 open the 3rd step 1s Blue 100 open So the Chase would come out as 1 The Red 100 open and stay for 1second SPEED 2 Then Red drop down from 100 to 0 the same time Green from 0 to 100 in 1second FADE 3 The Green stay 100 for 1second 4 Then Green drop down from 100 to 0 the same time Blue from 0 to 100 in 1second FADE 5 Blue stay 100 for 1second 6 Then Blue drop down from 100 to 0 the Red come up from 0 to 100 3 Remote2. programs speed from slow to fast when running gradient effect Instructions for installing the bar door and frost filter For this device the bar door and the frost filter can be istalled separately or together 1 When only install the frost filter use the rotating clips on the lens cover to fix it 2 When only install the bar door release the 2 M4 screws on the lens cover put on the bar door and tighten the screws 3 When install the bar door and frost filter together release the 2 M4 screws put on the frost filter and the bar door one by one then tighten the screws 16 XM303 V1 0 A CLEANING MAINTENANCE Werecommend a frequent cleaning ofthe device Please use a soft lint free and moistened cloth Never use alcohol or solvents CAUTION Disconnect from mains before starting maintenance operation There are no servicable parts inside the device Maintenance and service operations are only to be carried out by authorized dealers Should you need any spare parts please use genuine parts If the power supply cable of this device becomes damaged it has to be replaced by authorized dealers only in order to avoid hazards Should you have further questions please contact your dealer INSTALLATION This device is only constructed for a standing installation The device must only be installed absolutely planar at a vibration free oscilation free and fire resistant location Make sure
3. DMX addressing RDMX This function allows the DMX address to be changed remotely from a DMX console This setting requires special settings for both the controller and the fixture 1 RDMX function may be turned on and off and is be default Follow the procedure listed below to access the RDMX functions 2 Fixture Settings a Access the main menu and use the UP or DOWN to get to the OTHr menu then press ENTER b Once in the OTHr menu tap the UP or Down to get to the menu press ENTER c EBOC is the function that turn the RDMX function on and off Press ENTER and be sure the function is turned on 13 XM303 V1 0 A d Press the UP button to display ON to activate this function or OFF to deactivate this function e Press ENTER to confirm f Press MODE ESC to return to the main menu 3 Controller Settings a Set the DMX value of channel 1 to a value of 7 b Set the DMX value of channel 2 to a value of 7 or 8 When channel 2 is set to 7 you can adjust the starting address between 1 and 255 When set to 8 you can adjust the starting address between 256 and 512 c Use channel 3 to set your desired DMX starting address For example If you want to set the starting address to 57 set channel 1 to a value of 7 set channel 2 to a value of 7 and use channel 3 to set your address to 57 by selecting a channel value of 57 Example 2 If you want to set the starting a
4. as slave rni M 5t Unit functions as master CNTL EMEL ALON A Lg Ih Unit functions in stand alone MANU BLAC HLAL Blackout RED rE d R000 R255 Set red value p GREN S G000 G255 Set green value COLR LULr BLUE bLUE B000 B255 Set blue value sTRB 5E b 000 255 Set strobe value CHAS SPED 5FEd 001 255 Set chase speed CHAS 1 95 FADE FAdE 001 255 Set chase fade STRB SE r b 000 255 Set chase strobe SPED 5FEd 001 255 Set chase speed 2 50 pApE FRdE 001 255 Set chase fade STRB SE E b 000 255 Set chase strobe sPED SFEd 001 255 Set chase speed CHS3 LH5 FADE FAdE 001 255 Set chase fade sTRB 5E rb 000 255 Set chase strobe SPED SFEd 001 255 Set chase speed cHs4 CH54 001 255 Set fade STRB SErb 000 255 Set chase strobe XM303 V1 0 A SPED SFEd 001 255 Set chase speed cHss H55 FADE FAdE 001 255 Set chase fade sTRB 5Er b 000 255 Set chase strobe cHsG CH5 5 SPED SFEd 001 255 Set chase speed FADE FHdE 001 255 Set chase fade STRB SE b 000 255 Set chase strobe SPED SFEd 001 255 Set chase speed cus7 H57 FADE AdE 001 255 Set chase fade STRB SE b 000 255 Set chase strobe SPED SFEd 001 255 Set chase speed 5 58 FADE AdE 001 255 Set chase fade STRB 5tr b 000 255 Set chase strobe 2 MAST PRSE Sound controlled run as Master SOND
5. may heat up CAUTION Never look directly into the light source as sensitive persons may suffer an epileptic shock Please be aware that damages caused by manual modifications to the device are not subject to warranty Keep away from children and non professionals GENERAL GUIDELINES This device is a lighting effect for professional use on stages in discotheques theatres etc This fixture is only allowed to be operated with the max alternating 5 XM303 V1 0 A current which stated in the technical specifications in the last page of this manual the device was designed for indoor use only Lighting effects are not designed for permanent operation Consistent operation breaks may ensure that the device will serve you for a long time without defects Do not shake the device Avoid brute force when installing or operating the device The device shall only be used complete with its protective shield While choosing the installation spot please make sure that the device is not exposed to extreme heat moisture or dust The minimum distance between light output from the projector and the illuminated surface must be more than 0 1 meter Operate the device only after having familiarized with its functions Do not permit operation by persons not qualified for operating the device Most damages are the result of unprofessional operation Please use the original packaging if the device is to be transported For safety reasons ple
6. Blue PROFESSIONAL LED Lighting USER MANUAL ss S WALLY 336 KEEP THIS MANUAL FOR FUTURE NEEDS C CAUTION For your own Safety please read this user manual carefully before you initial start up Every person involved with the installation operation and maintenance of this device has to be qualified follow the instructions of this manual consider this manual to be part of the total product keep this manual for the entire service life of the product pass this manual on to every further owner or user of the product download the latest version of the user manual from the Internet INTRODUCTION Thank you for having chosen this professional LED lighting You will see you have acquired a powerful and versatile device Unpack the device Inside the box you should find 1 The fixture device 2 One power cables 3 XLR connection cable 4 One safety rope and this manual Belows are the optional accessories please purchase from your local dealer if needed 1 bar door 2 frost filter Please check carefully that there is no damage caused by transportation Should there be any consult your dealer and don t install this device 1 XM303 V1 0 A DESCRIPTION OF THE DEVICE Features 3 4 or 6 DMX channels selectable for numerous applications Equipped with 36 x 3 W LEDS 12 x red 12 x blue 12 x green 100 000 hours LED life The LEDS can be controlled individually Switch mod
7. ase be aware that all modifications on the device are forbidden If this device will be operated in any way different to the one described in this manual the product may suffer damages and the guarantee becomes void Furthermore any other operation may lead to short circuit burns electric shock lamp explosion crash etc 6 XM303 V1 0 A INSTALLATION INSTRUCTIONS CAUTION Do not operate this device with open cover CAUTION Only install the lamp with the device unplugged from the mains Mounting the device CAUTION Please consider the EN 60598 2 17 and the other respective national norms during the installation The installation must only be carried out by a qualified person The installation of the effect has to be built and constructed in a way that it can hold 10 times the weight for 1 hour without any harming deformation The installation must always be secured with a secondary safety attachment e g an appropriate safety rope Never stand directly below the device when mounting removing or servicing the fixture The operator has to make sure the safety relating and machine technical installations are approved by an expert before taking the device into operation for the first time These installations have to be approved by a skilled person once a year CAUTION Before taking into operation for the first time the installation has to be approved by an expert 7 XM303 V1 0 A Cautions Th
8. ation could damage the device Leave the device switched off until it has reached room temperature This device falls under protection class I Therefore it is essential that the device be earthed The electric connection must carry out by qualified person The device shall only be used with rate voltage and frequency Make sure that the available voltage is not higher than stated at the end of this manual Make sure the power cord is never crimped or damaged by sharp edges If this would be the case replacement of the cable must be done by an authorized dealer Always disconnect from the mains when the device is not in use or before cleaning it Only handle the power cord by the plug Never pull wb XM303 V1 0 A out the plug by tugging the power cord During initial start up some smoke or smell may arise This is a normal process and does not necessarily mean that the device is defective it should decrease gradually Please don t project the beam onto combustible substances Fixtures cannot be installed on combustible substances keep more than 50cm distance with wall for smooth air flow so there should be no shelter for fans and ventilation for heat radiation If the external flexible cable or cord of this luminaire is damaged it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard CAUTION Never touch the device during operation The housing
9. ble needed should be two core screened cable with XLR input and output connectors Please refer to the diagram below DMX output DMX Input 3 Pin XLR Socket 3 Pin XLR Socket 1 Ground e 2 Signal 3 Signal n DMX512 DNS 420 onms DMX controller DMX 512 connection with DMX terminator For installations where the DMX cable has to run a long distance or 1s in an electrically noisy environment such as in a discotheque it is recommended to use a DMX terminator This helps in preventing corruption of the digital control signal by electrical noise The DMX terminator is simply an XLR plug with a 120 Q resistor connected between pins 2 and 3 which is then plugged into the output XLR socket of the last fixture in the chain Please see illustrations below 1202 2 1 2 10 XM303 V1 0 A 1 Display menu MODE AXXX 20d AppR Hdgdr 1512 81001 Set dmx address Display Blackout function When activated the pisp ciSP display will automatically blackout when not use FLIP FLIP IEF When ON this function rotate the display 180 3 032 3 dmx channels rgb CHAN E HAM 4 4 dmx channels rgb master dim 6 0 CH 6 dmx channels SLAV SLAL IGFF Unit functions
10. ddress to 420 set channel 1 to a value of 7 channel 2 to 8 and channel 3 to 164 256 164 420 4 Wait for approximately 20 seconds for the unit to complete the address reset function 14 XM303 V1 0 A 2 INSTRUCTIONS ON USE DMX channel s functions and their values 6 DMX channels Mode Channel Value Function 3CH 4CH 6CH i i i group Red 0 255 Red 0 Black 255 100 group Green 0 255 Green 0 Black 255 100 Green group Blue 0 255 Blue 0 Black 255 100 Blue General dimming NA 4 NA 0 255 dimming 0 Black 255 100 internal programs 0 10 without internal program 11 40 internal program 1 41 70 internal program 2 71 100 internal program 3 NA NA 4 101 130 internal program 4 131 160 internal program 5 161 190 internal program 6 191 220 internal program 7 221 255 gradient effect NA NA 5 Strobe 0 No function shutter open 1 95 Strobe effect slow to fast 96 127 No function shutter open 128 159 Pulse effect in sequences 160 191 No function shutter open 15 XM303 V1 0 A 192 223 Random strobe effect slow to fast 224 255 No function Shutter General dimming speed 0 255 dimming 0 Black 255 100 NA NA 6 speed from slow to fast when running internal
11. e effect should be installed outside areas where persons may reach it walk by or be seated CAUTION When installing the device make sure there is no highly inflammable material within a distance of min 0 5m Overhead mounting requires extensive experience including amongst others calculating working load limits installation material being used and periodic safety inspection of all installation material and the device If you lack these qualifications do not attempt the installation yourself Improper installation can result in bodily injury CAUTION The electric connection must only be carried out by a qualified electrician Before mounting make sure that the installation area can hold a minimum point load of 10 times the device s weight Connect the fixture to the mains with the power plug 8 XM303 V1 0 A Overhead rigging lll Ly Screw the bolt of the clamp into the hold of the bracket and tighten the screw underneath Pull the safety rope through the holes on the bracket of the base and over the trussing system or a safe fixation spot Insert the end in the carabine and tighten the safety screw 9 XM303 V1 0 A DMX 512 control connection Connect the provided XLR cable to the female 3 pin XLR output of your controller and the other side to the male 3 pin XLR input of the LED lighting You can chain multiple LED lighting together through serial linking The ca
12. e power supply Automatic power supply adaption between 100 and 240 Volts without power selector Stepless RGB colour changing Programmable color change speed and strobe effect DMX controlled operation or stand alone operation with Master Slave function Strobe effect with 1 18 flashes per second Programmed chaser Rainbow effect with adjustable speed Advantages of LED technology Extremely long life low power consumption minimal heat emission defact maintenance free with brilliant light radiation DMX control via every standard DMX controller 2 XM303 V1 0 A Overview 1 Housing 2 LEDS 3 Floor stand 4 Menu button 5 Up button 6 Down button 7 Enter button 8 Power input oh n 9 DMX output i 10 DMX input tL CLER II En lI SAFETY INSTRUCTIONS This device has left the factory in perfect condition In order to maintain this condition and to ensure a safe operation it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual Important Damages caused by the disregard of this user manual are not subject to warranty The deale will not accept liability for any resulting defects or problems If the device has been exposed to temperature changes due to environmental changes do not switch it on immediately The arising condens
13. that the device is installed absolutely planar by using a water level TECHNICAL SPECIFICATIONS Power supply 100V 240V 50 60Hz Power consumption max 150 W Packing dimensions 40 x 30 x 48 CM Net weight 7 KGS Gross weight 1OKGS Remark errors and omissions for every information given in this manual except All information is subject to change without prior notice 17 XM303 V1 0 A
Download Pdf Manuals
Related Search