Home

Curve L Installation Manual

image

Contents

1. INSTALLATION GUIDE CURVE Pando CURVE HOOD ATTENTIONI Please read the User Manual before installing and using the range hood The hood must be centered over the cooking area If this requirement is not fulfilled correct aspiration is NOT GUARANTEED Before begin the installation please verify that the diameter of the flue the engine and the SEC tube are the indicated in their respectives characteristics table Do not use the SEC tube as a cover of another tube smaller Do not connect the hood to the main supply until the installation Step 8 1 Unpack the range hood CURVE Verifv the condition of the range hood 2 Drill the holes in the wall how is indicated in the fig 1 mantaining the axis in the middle of the cooking area Put the decorative flue s mounting bracket furring to the ceiling and in the middle of the axis and drill the holes necessaries to fix it 246cm on g AXIS CABINET 20cm xo 20cm 119 6 cm TITTI Advertise This measures are the recommended for the installation therefore for the CURVE C version as for the CURVE L version 3 Insert the plugs and put the hood support bv screws 5 Screw the hood by the holes as in the figure 6 Intube the engine and the flue with the SEC tube by following the tips of the User Installation Manual Fix the connections hermetically with the flanges 7 Turn off the re
2. sidual current device connect the hood to the mains supply then turn on the residual current device Check the correct installation of the hood 8 Put the decoratives flues in the upper of the hood as in the figure so that the holes in the external of the set coincide with the box s holes 9 Screw the external part of the decoratives flues at the bodv of the hood and push up the internal flue till align the holes in with the others in the decorative flues s mounting bracket It must cover totallv the flexible flue Then screw the upper decorative flue 10 Verify the correct installation and function on the CURVE hood Remove the non scratch plastic and enjoy your new Pando hood Pando AENOR Fabricado por INOXPAN S L Certificado de Empresa de Gestion de la E Calidad UNE EN ISO 9001 2000 e Pol Ind El Cros Cami del Cros S N a Apdo Correos n 21 08310 ARGENTONA Barcelona The International Certification Network 2 Spain Quality Management System ISO iNet yy 9001 2000 QM Tel 34 93 757 94 11 Fax 34 93 757 96 53 www pando es

Download Pdf Manuals

image

Related Search

Related Contents

Mpman MPDC88BTIPS  PELE student user manual  ICY BOX IB-223StU+Wh USB powered  Toshiba SP1 2,200 ANSI Lumens/SVGA 800x600 pixels/2.2 kg  

Copyright © All rights reserved.
Failed to retrieve file