Bosch WAP28380AU 8kg Front Load Washing Machine User Manual
Contents
1. Register your new Bosch now www bosch home com welcome Washing machine WAP en Instruction Manual and Installation Instructions Your new washing machine You have chosen a Bosch washing machine Please take a few minutes to read and become familiar with the advantages of your washing machine To meet the high quality demands required by Bosch every washing machine that leaves our factory is carefully checked to ensure that it functions correctly and Is in perfect condition For more information on our products accessories replacement parts and services see our website www bosch home com or contact our after sales service centres lf the operating and installation instructions describe different models any differences will be pointed out at the relevant points in the text an Read these operating and installation instructions before switching on the washing machine Display rules A Warning This combination of symbol and signal word indicates a possibly dangerous situation Not heeding the warning can Cause death or injuries Caution This signal word indicates a possibly dangerous situation Not heeding the caution can cause property and or environmental damage Note tip Information about the optimum use of the appliance any other useful information 1 2 3 a b The steps are represented by numbers or letters a Lists are represented by a sm2. Measuring aid A For liquid detergent Compartment II Detergent for the main wash water softener bleach stain remover Fabric softener starch Do not exceed the max Detergent for orewash Compartment amp Compartment I 1 Pull out the detergent drawer as far as possible 2 Add detergent and or care products 3 Close the detergent drawer Measuring aid for liquid detergent Depending on the model Position the measuring aid for measuring the correct amount of liquid detergent 1 Pull out the detergent drawer Press down the insert and fully remove the drawer 2 Slide the measuring aid forwards fold it down and click it into place 3 Reinsert the drawer Note Do not use the measuring aid for gel detergents and washing powder or for programmes with prewash or when Finish in time is selected For models without a measuring aid pour the liquid detergent into the appropriate dispenser and place it in the drum Start the programme Press the Dll button The indicator lamp lights up and the program starts The display panel shows the Finish in time while the program is running or the program duration and the program progress symbols once the wash cycle has started Operating the appliance en Note Foam detection lf the symbol also lights up in the display panel the washing machine has detected too much foam during the wash cycle and automatically activated additional rinse cy
3. en Positioning and connecting Drainage into a siphon The connection point must be secured using a hose clamp with a diameter of 24 40 mm available from specialist dealers Outlet into a plastic pipe with rubber bushing or into a drainage pit Levelling Level the appliance using a spirit level Incorrect levelling may result in intense noise vibrations and wandering 1 Loosen the lock nuts using a wrench by turning it in a clockwise direction 2 Check the alignment of the washing machine with a spirit level and adjust it if necessary Change the height by turning the appliance feet All four appliance feet must stand firmly on the ground 3 Tighten the lock nut against the housing In doing so hold the foot tight and do not adjust its height The lock nuts on all four appliance feet must be screwed tightly against the housing 30 Electrical connection Z Warning Danger of death There is a risk of electric shock if you touch live components m Never touch or hold the mains plug with wet hands m Only pull out the mains cable by the plug and never by the cable as this could damage it m Never unplug the mains plug during operation Observe the following information and ensure that Notes m Ihe mains voltage and voltage indicated on the washing machine rating plate are the same The connected load and fuse required are specified on
4. 4 Easy Care synthetics cold max 60 C Detergent for delicates suitable for delicate fine fabrics silk or viscose Programme lt Delicates Silk Delicate Silk cold max 40 C Detergent for woollens Suitable for woollen fabrics Programme amp 8 Wool cold max 40 C 12 Saving energy and detergent For light and normal soiling you can save energy lower washing temperature and detergent Saving Soiling note Reduced temper Light ature and deter No visible dirt or stains Cloth gent quantity as ing has taken on some body per the recom odour g mended dosage Light summer sports clothing worn for a few hours m shirts shirts blouses worn for up to one day m Guest bed linen and hand towels used for one day Normal Visible dirt or a few light stains g m shirts shirts blouses sweat soaked worn a few times m Towels bedding used for up to one week Temperatureas Heavy per the care label Dirt and or stains clearly visi and detergent ble e g tea towels baby quantity as per items work clothing the recom mended dosage for heavy soiling Note When measuring the amount of all detergents additives care products and cleaning agents please always check the manufacturer s instructions and information Measure and add detergent and care products gt Page 16 Programme default settings Note You can find possible orogramme defau
5. Df button to continue the program The door is unlocked It is possible to add laundry If you cannot rectify a fault yourself after switching the machine off and on again or a repair is required m Switch off the appliance and pull out the mains plug m urn off the tap and call customer services 24 After sales service If you cannot correct the fault yourself see section Faults and what to do about them Page 22 please contact our after sales service Cover page We will always find an appropriate solution in order to avoid unnecessary visits by engineers Please give the after sales service the product number E no and the oroduction number FD of the appliance E N FD Product number Production number You can find this information Depending on the model On the inside of the washing machine door in the opened service flap and on the rear of the appliance Trust the expertise of the manufacturer Contact us for assistance By doing so you will ensure that the repairs are carried out by trained service personnel using genuine spare parts After sales service en Technical data Dimensions 85 x 60 x 59cm height x width x depth Weight 72 kg Mains connection Nominal voltage 220 240 V 50 Hz Nominal current 10 A Nominal power 1900 2300 W Water pressure 100 1000 kPa 1 10 bar 25 en Positioning and connecting connecting Included with the appliance
6. Make sure that no items of laundry are trapped between the washing machine door and the rubber seal and close the door The Dll button indicator lamp flashes and the programme settings continue to be displayed on the display panel one after another It is possible to change the settings Measure and add detergent and care products Caution Damage to the appliance Cleaning agents and agents for pretreating laundry e g stain removers orewash sprays etc may cause damage if they come into contact with the surfaces of the washing machine Do not allow these agents to come into contact with the surfaces of the washing machine If necessary immediately wipe away spray residue and other residues droplets with a damp cloth 16 Measuring Measure the detergent and care products according to m Water hardness ask your water Supply company m he manufacturer s instructions on the packaging The amount of laundry m Soiling Filling Z Warning Eye skin irritation Detergent and care products may spray out if the detergent drawer is opened while the machine is in operation Open the drawer carefully Rinse eyes or skin thoroughly if they come into contact with detergent care oroducts lf swallowed accidentally seek medical advice Note Dilute viscous fabric softener and fabric conditioner with water this orevents blockages Pour the detergent and care products into the appropriate compartments
7. Water inlet 000 28 Water outlet 00 29 Levelling 0 eee eee 30 Electrical connection 30 Before washing for the first time 31 Transportation 0000 31 Intended use For private domestic use only m he washing machine is suitable for washing machine washable fabrics and hand washable wool in detergent solution m To be operated with cold mains water and standard detergents and care products which are suitable for use in front loading washing machines Do not use detergents for hand wash m When measuring the amount of all detergents additives care products and cleaning agents always check the manufacturer s instructions Ihe washing machine may be used by children over the age of 8 years old and by persons with reduced physical sensory or mental capacity or by persons with a lack of experience or knowledge if they are supervised or have been instructed by a responsible person Children must not perform cleaning or maintenance work unsupervised m Keep children under the age of 3 years away from the washing machine m Keep pets away from the washing machine Read the Instruction Manual and Installation Instructions and all other information supplied with the washing machine and use the machine accordingly Retain the documents for subsequent use Safety instructions Electrical safety Z Warning Danger of death There is a risk of ele
8. in a shorter time while achieving a washing result that is consistent with but uses more energy than the selected program without the SoeedPerfect EcoPerfect setting Note Do not exceed the maximum load E EcoPerfect Energy optimised washing by reducing the temperature while achieving a washing result that is consistent with the selected program without the SpeedPerfect EcoPerfect setting Press the button to do this First of all you can select the O SpeedPerfect setting If you press the button again the EcoPerfect setting is active The respective symbol is shown in the display when the setting is activated If you press the button again no setting is active 14 Rinse amp Water Plus ex amp Extra Water Increased water level and additional rinse cycle extended washing time For areas with very soft water or for further enhancing the spin result Soak Before the main wash cycle starts the washing remains for longer in the water to partially dissolve intensive soiling To be used for particularly stubborn soiling put detergent in dispenser before starting the appliance Notes m Load laundry of the same colour f your machine does not have this option you can soak as follows 1 Select the 7 Cottons30 C programme and the Dil button 2 Press the Df button after approx 10 minutes The laundry remains in the soaking solution 3 Leave the laundry to soak for as long as require
9. machine door and remove the laundry 2 Turn the programme selector to Off Appliance is switched off 3 Turn off the tap Not required for Aqua Stop models Contents of package Notes Do not leave any items of laundry in the drum They may shrink in the next wash or discolour another item Remove any foreign objects from the drum and the rubber seal risk of rusting Leave the washing machine door and detergent drawer open so that any residual water can dry away Always remove the washing Always wait until the programme ends as the appliance could still be locked Switch the appliance on and wait for the unlocking device lf at the end of the programme the display has gone out the energy saving mode is active To activate select any button Ei Setting the signal You can change the following settings m The volume for the information signals e g at the end of the program and or m The volume of the audible button signals You will need to activate the setting mode in order to change these settings 1 2 3 positions on the program selector Activate setting mode 1 Set the program selector to position 1 The washing machine is switched on 2 Press the Dll button and at the same time turn the program selector clockwise to position 2 Release the button The setting mode is activated and the oreset volume for the information signals appears in the d
10. off en en Getting to Know the appliance Display panel In the table you can find possible settings and information in the display panel these differ depending on the model 90 30 60 20 101 40 LUI Settings for the selected programme 90 Temperature in C Temperature 0 1400 Spin speed in rom Maximum spin speed or Rinse stop without final spin revolutions per minute washing remains in the water after the last rinse W30 Programme length ee on the programme selection in h min hours min utes 1 24 Finish in h hours End of programme after Hours 9 0 Load in kg Maximum load Depending on the model Status indicators for the programme progress programme sequence S e End Wash rinse spin drain programme end c Childproof lock Lights up The childproof lock is active Flashes The childproof lock is actived and if the programme selector has been adjusted or the buttons have been pressed Door lock Lights up When the door can not be opened Tap Lights up Water pressure is too low This extends the pro gramme duration Flashes The tap has not been turned on or there is no water supply Ae Overdosage On if too much foam detected one additional rinse cycle switched on C Power consumption Depending on the model 10 r Laundry Prepare the laundry Caution Damage to the appliance fabrics Foreign objects e g coins paper clips needles
11. programme without laundry are required to be run at initial setup and this operation only needs to be completed once 7 Open the detergent drawer 8 Pour approximately 1 litre of water into compartment II 9 Pour standard detergent into compartment Il Note To prevent foaming only use half the amount of detergent recommended by the detergent manufacturer Do not use detergent designed for wool or delicates 10 Close the detergent drawer 11 Press the Dll button 12 When the program ends switch off the appliance Your washing machine is now ready to use Do MRO DS Positioning and connecting en Transportation e g when moving home Preparatory work 1 Turn off the water tap 2 Reduce the water pressure in the supply hose Maintenance filter in the water Supply Page 22 3 Drain the remaining detergent solution Maintenance detergent solution pump blocked gt Page 20 4 Disconnect the washing machine from the mains 5 Remove the hoses Installing the transport locks 1 Remove the covers and keep them in a safe place Use a screwdriver if necessary 2 Insert all four sleeves Clip the mains cable securely in the holders Insert and tighten the screws Before switching on the appliance again Notes he transport braces must be removed m o prevent unused detergent from flowing straight into the drain during the next wash Pour approx 1 litre of water into compar
12. Note Check the machine for transport damage Never use a damaged machine If you have any complaints contact the dealer from whom you ourchased the appliance or our Customer Service 1 Mains lead Bag Installation and operating instructions m Customer Service location directory m Warranty Supplement m Cover caps for openings after the transport braces have been removed IH 26 Positioning and Water inlet hose on aquaStop models Water outlet hose Elbow for securing the water outlet hose Cold water inlet hose on Standard Aqua Secure models Depending on the model In addition a hose clamp 24 40 mm diameter available from specialist retailers is required to connect the water outlet hose to a siphon Useful tool m Spirit level for aligning m Wrench with WAF18 for loosening the transport braces and WAF 17 for aligning the appliance feet Page 30 Safety instructions Z Warning Risk of injury Ihe washing machine Is very heavy Be careful when lifting transporting the washing machine m When the washing machine is lifted by its protruding parts e g the washing machine door the components may break off and Cause injuries Do not lift the washing machine by protruding parts Ifthe hose and mains cables are not routed properly there is a risk of tripping and injury Lay hoses and cables in such a way that there is no risk of tripping Caution Damag
13. Page 20 m Clean the drain pipe and or the drain hose 23 en Faults and what to do about them Faults Water is not visible in the drum The spin result is not satisfactory Laundry is wet too damp The spin cycle runs several times The program is taking longer than usual The length of the program changes during the wash cycle Residual water in the care product compartment amp Odours in the washing machine The symbol lights up in the display panel Foam may also be leaking from the detergent drawer Loud noises vibrations and machine movement during the spin cycle The display panel indica tor lights do not work while the appliance is running There is detergent residue on the laundry The symbol lights up in the display in pause mode In the pause mode the symbol in the display is off Cause Remedy Not a fault the water is below the visible area m Nota fault the unbalanced load detection system has interrupted the spin cycle because the laundry is unevenly distributed Distribute small and large items of laundry evenly in the drum Anti crease depending on the model selected m Ilsthe selected speed too low Not a fault the unbalanced load detection system is adjusting an imbalance m Nota fault the unbalanced load detection system is adjusting an imbalance by repeatedly distributing the laundry m Nota fault the foam detection is system active a ri
14. able in your area Do s Hand over the old discarded electronic equipment only to authorized collection centers for disposal Consult the authorized service center as to whether the Electronic Equipment can be repaired or not before discarding Consult the retailer about appliance take back schemes Don ts Don t dump the discarded Electronic Equipment in the open or in any land fill site as this will result in contamination of the soil and the ground water Don t dispose of the discarded Electronic Equipment in household bins or Municipal bins The product is not meant for re sale to any unauthorized agencies scrap dealers Don t keep any replaced spare part s from the product in an exposed area Environmental protection en Tips on economical use Always fill the appliance with the maximum amount of laundry for each programme Overview of programmes Supplementary sheet for the operating and installation instructions Wash normally soiled laundry without a prewash Save energy and detergent when washing lightly and normally soiled laundry Saving energy and detergent Page 12 The selectable temperatures apply to the care labels on the textiles The temperatures in the machine may deviate from this so that you get the optimum mix of energy saving and washing results Information about the energy consumption The display provides information about the relative energy consumption in the
15. all box or a dash Contents Intended use 4 Safety instructions 5 Electrical safety nannaa aana aa 5 Risk of INnjUTY n on annaa aaa 5 Safety for children aaaaaa aaa 5 Environmental protection 7 Packaging used appliance 7 Tips on economical use T7 Getting to know the appliance 8 Washing machine 005 8 Control panel 2 0008 9 Display panel 0008 10 LAUNAY oa riernis oe deena ee 11 Prepare the laundry 11 Sorting laundry esaa aaaea ee oe 11 SaO sever et he oe ek we eee 11 Dyeing bleaching 0005 11 Detergent 6 c0s4eesauseeaanae 12 Correct selection of detergent 12 Saving energy and detergent 12 Programme default settings 13 TCMPCl AlN a2 4 4eeee24ee22 5 13 MOG ena 654 a eh eee ease 13 Ready in Finished in 13 Additional programme CRN Sr otc eres areca o 14 SpeedPerfect EcoPerfect 14 Rinse amp Water Plus 14 DOG arrede ed oad ote aes 14 OS WON s sare ace arn ane ee ae 14 Sy Operating the appliance 15 Preparing the washing machine 15 Select programme switch on the appliance o a s a4 4 0 the fog ae eat a 15 Change the programme default SCUINGS a0 a snd bh 8 GoGo os Re ASRS 15 en Select additional programme SeEttiNgS auaa 15 Placing laundry into the drum 15 Measure and add detergent and care products 000
16. cles to remove the foam Add less detergent to the next wash cycle with the same load If you want to lock the program to prevent it from being inadvertently adjusted you can select the childprooft lock as follows Childlock 3 sec You can lock the washing machine to orevent the functions you have set from being changed inadvertently To do this activate the childproot lock when the program has started To activate deactivate press and hold the rpm and Ready in Finished in buttons at the same time for approx three seconds he symbol appears in the display panel m lights up The childproof lock is active m flashes The childproof lock is active and the program selector has been adjusted To deactivate the childproof lock reset the program selector to the initial program The symbol lights up again Note To avoid the program to terminate do not turn the program selector beyond the Off position Note The childproof lock remains active after the program has ended and the appliance is switched off You must always deactivate the childproof lock If you want to start a new program 17 en Operating the appliance Adding removing laundry Following the start of the program you can add or remove laundry as required Press the Df button to do this The Dill button indicator lamp flashes and the machine checks whether it is possible to add laundry lf the following appears in the dis
17. ctric shock if you touch live components Never touch or hold the mains plug with wet hands a Only pull out the mains cable by the plug and never by the cable as this could damage it m he appliance must be grounded Electrical connection Page 30 Risk of injury A Warning Risk of injury a When the washing machine is lifted by its protruding parts e g the washing machine door the components may break off and cause injuries Do not lift the washing machine by protruding parts a lf you climb on the washing machine the worktop may break and cause injuries Do not climb onto the washing machine Safety instructions en a f you lean on the washing machine door when it is open the washing machine may tip over and cause injuries Do not lean on the washing machine door when it is open Reaching into the drum when it is turning can cause injuries to hands Do not reach into the drum when it is turning Wait until the drum has stopped turning Z Warning Risk of scalding When you are washing at high temperatures there is a risk of scalding if you come into contact with hot water e g if hot water is being drained into a wash basin Do not reach into the hot detergent solution Safety for children A Warning Danger of death If children play with the washing machine they may get into life threatening situations or injure themselves m Do not leave children unattende
18. d then either press the Dill button again to continue the programme or change the programme Note No additional detergent is required the soaking solution is used for washing Easy iron A Special spin sequence with subsequent fluffing Gentle final spin residual moisture in the laundry slightly increased Operating the appliance Note Install and connect washing machine properly Before the 1st wash gt Page 31 Preparing the washing machine Notes m Never switch on a damaged washing machine Inform customer service Connect the mains plug Turn on the tap Open the door Check that the drum is completely emptied Empty if necessary ai a ST Select programme switch on the appliance Note If you have activated the childproof lock you must first deactivate it before you can set a program Use the program selector to select the required program Can be rotated in either direction The appliance is switched on The program default settings for the selected program appear in the display panel m lemperature m Spin speed m he maximum load and the duration of the program alternately m Energy consumption Depending on the model Operating the appliance en Change the programme default settings You can use the default settings or change them To do this repeatedly select the corresponding button until the required setting is displayed The setti
19. d near the washing machine Do not let children play with the washing machine en Safety instructions Z Warning Danger of death Children may lock themselves in appliances putting their lives at risk For appliances that have reached the end of their service life a Disconnect the mains plug a Cut through the mains cable and remove it along with plug m Destroy the lock on the washing machine door Z Warning Risk of suffocation Children may become wrapped in packaging film or packing parts if allowed to play with them or they may pull them over their heads and suffocate Keep packaging film and packaging parts out of the reach of children Z Warning Risk of poisoning Detergents and care products may be poisonous if consumed Keep detergents and care oroducts out of the reach of children Z Warning Eye skin irritation Detergents and care products may cause Irritation if they come into contact with the eyes or skin Keep detergents and care oroducts out of the reach of children Z Warning Risk of injury When you wash at high temperatures the glass in the machine door gets ot Do not let children touch the hot washing machine door Environmental protection Packaging used appliance i Dispose of packaging in an environmentally responsible manner The following Do s and Don ts orovide a framework for the return and recycling of used products when avail
20. e to the appliance Frozen hoses may rip burst Do not install the washing machine in areas exposed to frost or outdoors Caution Water damage The connection points for the water Supply hose and water drain hose are under high water pressure To prevent leaks and water damage you must follow the instructions in this section Notes In addition to the safety information listed here the local water and electricity supplier may have special requirements m lf in doubt have the appliance connected by a specialist Installation surface Note The washing machine must be stable aligned so that it does not move around The installation surface must be firm and level m soft floors floor coverings are not Suitable Installation on a base ora wooden joist floor Caution Damage to the appliance The washing machine may wander and tio topple from the base when spinning The feet of the appliance must be secured with holding brackets Order no WMZ 20490 WZ 20490 WZ 20510 WZ 20520 Note On wooden joist floors install the washing machine m In a corner if possible On a water resistant wooden board min 30 mm thick which is screwed tightly to the floor Positioning and connecting en Installation on a platform with drawer Platform order no WMZ 20490 WZ 20490 WZ 20510 WZ 20520 Installing the appliance in a kitchenette Z Warning Danger of death There is a risk of electric sh
21. eee 16 Start the programme 0 17 CHICO CK ara nce Gok oo ek bat are tee 17 Adding removing laundry 18 Changing the programme 18 Cancel the programme 18 Programme end during rinse hold 18 Programme end 00008 18 Removing laundry switching off the 21 6 3 6 se 1 Ei Setting the signal 19 5 Sensors 2ccecceeeeeee 19 Unbalanced load detection system 19 Cleaning and maintenance 20 Machine housing control panel 20 DU Mns ese eeoeeen atane one eens 20 Descaling 4 s 2deua ee eek oe oa 20 Detergent drawer and housing 20 Detergent solution pump blocked 20 The drain hose at the siphon is blocked es 21 Filter in the water supply blocked 22 Faults and what to do about WIG 66 64 65 Gs beeen 22 Emergency release 0 4 22 Information on the display panel 23 Faults and what to do about them 23 After sales service 25 Technical data 25 Positioning and connecting 26 Included with the appliance 26 Safety Instructions 0 26 Installation surface 0 27 en Intended use Installation on a base or a wooden OISUNIOO 2344004 0H Sens Sas nnii 21 Installation on a platform with Eli E TEE E E E E Bow oe E Of Installing the appliance ina kitchenette 2 0 0 0 0 Of Removing the transport locks Of Hose and cable lengths 28
22. en it Is turning Wait until the drum has stopped turning Caution Water damage Any escaping water may cause water damage Do not open the washing machine door if water can be seen through the glass 1 Switch off the appliance Disconnect the mains plug 2 Drain the detergent solution 3 Pull the emergency release downwards with a tool and release The washing machine door can then be opened Faults and what to do about them en Information on the display panel Display Cause Remedy m Flashes fast signal The door was opened and the water level is too high Close the door continue the programme with DO button or select Spin Drain F programme m Flashes slowly The door lock temperature is too high to open the door Wait approx 30 seconds until the door lock temperature cools down amp m Flashes no water supply Tap turned on Water inlet filter blocked Clean the water inlet filter If an additional water filter has been installed depending on the model check for contaminants and clean if required gt separate installation and cleaning instruction for water filter Water hose kinked or blocked Lights up low water pressure For information only This will not affect the pro gramme progress The programme duration is extended Ee Drain pump blocked clean the drain pump Clean the drainage hose on the siphon Eee Alternating display with End when programme is finished unbalance proble
23. ialist dealers the after sales Service An extension for Aqua Stop or cold water supply hose approx 2 50 m order no WMZ2380 WZ10130 CZ11350 Z7070X0 m A longer supply hose approx 2 20 m for standard model Water inlet Z Warning Danger of death There is a risk of electric shock if you touch live components Observe the following when connecting the machine Notes m Only operate the washing machine using cold mains water m Do not connect the machine to the mixer tap of an unpressurised hot water boiler m Do not use a used supply hose Only use the supply hose supplied or one that was purchased from an authorised specialist retailer Do not bend squash modify or cut through the water supply hose otherwise its strength is no longer guaranteed m Only tighten the screw connections by hand If the screw connections are tightened too much with a tool pliers the thread may be damaged Optimum water pressure in the supply network At least 100 kPa 1 bar Maximum 1000 kPa 10 bar When the tap is open the water flow is at least 8 I min lf the water pressure is higher than this a oressure reducing valve must be installed Connection 1 Connect the water supply hose to the water tap 26 4 mm and to the appliance Model Standard Model Aqua Stop Tip Connect also an external water filter depending on the model between water s
24. isk of scalding When you wash at high temperatures the water gets very hot If you come into contact with the hot water you may be scalded Allow the water to cool down 1 Turn off the water tap so that no more water can flow in and has to be drained via the drain pump 2 Switch off the appliance Disconnect the mains plug 3 Open and remove the service flap 4 Take the drain hose out of the retainer Remove the sealing cap allow the detergent solution to flow out into a Suitable container Replace the sealing cap and place the drainage hose in the retainer 5 Carefully unscrew the pump cover residual water may leak out Clean the interior pump cover thread and pump housing The impeller in the detergent solution pump must be able to rotate Refit the pump cover and screw it on tightly The handle must be ina vertical position Cleaning and maintenance en 6 Place the service flap back on lock it into place and close it Note To prevent unused detergent from flowing straight into the drain during the next wash pour 1 litre of water into compartment Il and start the Spin Drain Y programme The drain hose at the siphon is blocked 1 Switch off the appliance Disconnect the mains plug 2 Loosen the hose clamp Carefully remove the drain hose residual water may leak out 3 Clean the drainage hose and siphon connecting piece 4 Reattach the drainage ho
25. isplay panel e g at the end of the program setting the signal en Changing the volume Use the Ready in Finished in or button to change the following settings at the corresponding program selector positions m 2 The volume of the information signals and or m 3 The volume of the button signals QO off 1 quiet i 2 medium 3 loud 4 very loud Exiting setting mode You can now end the process and set the program selector to the Off position The settings are saved Sensors Unbalanced load detection system The automatic unbalanced load detection system detects imbalances and ensures even distribution of the laundry by repeatedly starting and stopping drum spinning If the laundry is extremely unevenly distributed the speed is reduced or the spin cycle is not performed for safety reasons Note Place large and small items of laundry evenly in the drum Faults and what to do about them Page 22 19 en Cleaning and maintenance Cleaning and maintenance Warning Danger of death There is a risk of electric shock if you touch live components Switch off the appliance and unplug the mains plug Z Warning Risk of poisoning Toxic vapours can be produced by cleaning agents that contain solvents e g cleaning solvent Do not use cleaning agents that contain solvents Caution Damage to the appliance Cleaning agents that contain solvents e g cleaning solven
26. lt settings in the overview these differ depending on the model The programme default settings for all programmes are preset at the factory and are displayed in the display panel after the programme is selected Temperature C Temp C Depending on what stage the program is In you can change the set temperature before and during the program The maximum temperature that can be set depends on the program that has been selected rpm rom Depending on what stage the program is In you can change the spin speed in rom revolutions per minute before and during the program Setting 0 The rinsing water is drained but there is no final spin The laundry stays wet inside the drum e g for items that should not be spun Setting Rinse Stop no final spin The laundry stays in the water after the final rinse You can select Rinse Stop to prevent creasing if the laundry will not be taken out of the washing machine immediately after the program has ended To continue end the program Page 18 The maximum speed that can be set depends on the model and program that has been selected Programme default settings en Ready in Finished in Finishin Before starting the program you can oreselect the program end Finish in time in hourly increments h hour up to a maximum of 24 hours To do this 1 Select a program The program duration is displayed for the
27. m spin ning phase is aborted Other displays Switch off the appliance wait for five seconds and then switch it on again If the dis play appears again call customer services Faults and what to do about them Faults Cause Remedy Water is leaking fromthe Attach the drain hose correctly or replace tt machine m lighten the screw connection of the drain hose The machine is not filling Have you pressed the DO0 button with water m Isthe tap turned on Detergent is not being m Could the filter be clogged Clean the filter gt Page 22 dispensed Note If an additional water filter has been installed depending on the model check for contaminants and clean if required gt separate installa tion and cleaning instruction for water filter m sthe supply hose kinked or trapped The door cannot be m Ihe safety function is activated Stop the program opened m s selected Rinse Stop no final spin a Can the door only be opened by the emergency release The program will not start m Have you pressed the D0 or Ready in Finished in button m isthe door closed m Isthe childproof lock activated Deactivate The drum briefly jerks or Not a fault the internal motor test may cause the drum to jerk or judder briefly judders after the program when the wash program starts has started The water is not draining m Is selected Rinse Stop no final spin m Clean the drain pump gt
28. nails may damage the laundry or components in the washing machine Therefore note the following tipos when preparing your laundry m Empty pockets m Look out for metal items paperclips etc and remove them m Wash delicates in a laundry bag tights underwired bras etc m Close any zips button up any cover buttons m Brush sand out of pockets and collars m Remove curtain fittings or place curtains in a laundry bag Sorting laundry Sort your laundry according to the care instructions and manufacturer s information on the care labels m Type of fabric fibre Colour Note Laundry can discolour or not be cleaned correctly Wash white and coloured laundry separately Wash new bright fabrics separately the first time you wash them m soiling Wash laundry with the same level of soiling together You can find examples of levels of soiling on Laundry en Cant Do not pretreat select the U SpeedPerfect setting if necessary Normal Heavy Load less laundry pretreat the laundry if necessary Stains Remove pretreat stains while they are fresh First dab the stain with soapy water do not rub Then wash the items of laundry with the appropriate programme Stubborn dried in stains can sometimes only be removed with several washes m symbols on the care labels The numbers in the symbols indicate the maximum washing temperature which may be used 7 Suitable for a normal washi
29. ng process e g 48 Cottons programme A gentle washing process is required e g 4 Easy Care Synthetics programme W Anespecially gentle washing process is required e g le Delicates Silk Delicate Silk programme amp Suitable for washing by hand e g 2 8 Wool programme Do not wash the laundry in the machine Starching Note Laundry shall not be treated with fabric softener Starching is possible in all wash programmes if liquid starch is used Measure starch into compartment amp in accordance with the manufacturer s instructions clean first if necessary Dyeing bleaching Dye should only be used in normal household quantities Salt may damage stainless steel Always follow the dye manufacturer s instructions Do not use the washing machine to bleach clothes 11 en Detergent Detergent Correct selection of detergent The care label is crucial to ensure correct detergent selection temperature and laundry treatment Standard detergent with optical brighteners suitable for heat resistant white washing made from linen or cotton Programme 4 Cottons cold max 90 C Detergent for colours without bleach or optical brighteners Suitable for coloured washing made from linen or cotton Programme 4 Cottons cold max 60 C Detergent for colours delicates without optical brighteners Suitable for coloured laundry made from easy care fibres synthetic fibres Programme
30. ngs are activated without needing to be confirmed They are not saved when the appliance is switched off Programme default settings gt Page 13 Overview of programmes Supplementary sheet for the operating and installation instructions Select additional programme settings By selecting additional settings you can better adapt the washing process to your items of laundry The settings can be selected or deselected depending on the programme progress The indicator lamp for the button lights up if a setting is active The settings are not saved when the appliance is switched off Additional settings gt Page 14 Overview of programmes Supplementary sheet for the operating and installation instructions Placing laundry into the drum Z Warning Danger of death Items of laundry pretreated with cleaning agents that contain solvents e g stain remover cleaning solvent may cause an explosion after being loaded into the washing machine Hand rinse items of laundry thoroughly beforehand 15 en Operating the appliance Notes m Mix items of laundry of varying sizes Laundry items of different sizes distribute themselves better during the spin cycle Individual items of laundry may lead to imbalances m Observe the specified maximum load Overfilling has a negative impact on the washing result and promotes creasing 1 Place presorted items of laundry unfolded in the washing drum 2
31. nse cycle has been switched on Not a fault the program sequence is optimised for the specific washing process This may change the length of the program shown In the display panel m Nota fault the effect of the care product is not affected m Clean the insert if necessary Depending on the model run the Drum Clean 90 C or 48 Cottons 90 C program without laundry Add washing powder or a detergent containing bleach Note To prevent foaming only use half the amount of detergent recommended A a manufacturer Do not use detergents designed for wool or elicates Have you used too much detergent Mix one tablespoon of fabric softener with 1 2 litre of water and pour it into com partment Il not suitable for outdoor clothing sportswear or items stuffed with down Use less detergent in the next wash cycle m sthe appliance aligned Align the appliance gt Page 30 m Are the appliance s feet fixed Secure the appliance s feet gt Page 30 m Have the transport braces been removed Remove the transport braces gt Page 2 Has there been a power failure Have the fuses blown Reset replace the fuses If the fault occurs repeatedly call customer services some phosphate free detergents contain water insoluble residue select Rinse Freshen up Rinse or brush the laundry after washing The water level is too high It is not possible to add laundry Close the door immediately if necessary Press the
32. ock if you touch live components Do not remove the appliance covering olate Notes m Recess width of 60 cm required m Only install the washing machine underneath a continuous worktop that is securely connected to adjacent cabinets Removing the transport locks Caution Damage to the appliance m he machine is secured for transportation using transport locks If the transport locks are not removed the drum for example may become damaged when the machine Is operated Before using the appliance for the first time make sure that you completely remove all four transport locks Keep the locks in a safe place m To prevent transport damage from occurring if the appliance is moved at a later date you must refit the transport locks before transporting the appliance Note Keep the screws and sleeves ina Safe place en Positioning and connecting 1 Take the hoses out of the holders 2 Unscrew and remove all four transport brace screws Remove the sleeves To do this remove the mains cable from the holders 3 Fit the covers Lock the covers firmly in place by applying pressure to the Snap in hooks Hose and cable lengths m Left hand connection 28 m Right hand connection 150cm 160 200 cm Depending on the model Tip The following are available from spec
33. play panel m the symbol disappears and adding is possible m the symbol lights up it is not possible to add laundry To continue the program press the button Dll The program continues automatically Notes m Do not leave the door open for too long when adding laundry as water from the laundry may leak out m For safety reasons the door remains locked when the water level or temperature is high or while the drum is turning and it is not possible to add laundry during this time m The load display is not active during reloading Changing the programme 1 Press the Df button 2 Select another program 3 Press the Dil button The new program starts from the beginning Cancel the programme For programs at high temperature 1 Press the DII button 2 To cool down laundry Select Rinse Freshen up Rinse 3 Press the Dil button For programs at low temperature 1 Press the Dll button 2 Select Spin Drain P 3 Press the Dl button 18 Programme end during rinse hold appears in the display panel and the indicator lamp of the DII button flashes Continue the program by m Pressing the Dll button or m selecting a spin speed or setting the program selector to Spin Drain Y and then pressing the Df button Programme end End appears in the display panel and the indicator lamp of the Dl button is off Removing laundry switching off the appliance 1 Open the washing
34. se and secure the connection using the hose clamp 21 en Faults and what to do about them Filter in the water supply blocked First reduce the water pressure in the Supply hose 1 Turn off the tap 2 Select any program except sy Rinse Freshen up Rinse Spin Drain W 3 Press the Df button Allow the program to run for approximately 40 seconds 4 Turn the program selector to off position Pull out the mains plug 5 Clean the filter on the tap Disconnect the hose from the tap Clean the filter with a small brush rs i 6 For standard and Aqua Secure models clean the filter on the rear of the appliance Remove the hose from the rear of the appliance Use pliers to remove the filter and then clean it 7 Connect the hose and check for leaks 22 Faults and what to do about them Emergency release e g in the event of a power outage The programme will continue running when the power supply has been restored However if the laundry has to be removed the washing machine door can be opened as follows Warning Risk of scalding When you are washing at high temperatures there is a risk of scalding if you come into contact with detergent solution and laundry If possible leave it to cool down Z Warning Risk of injury You may injure your hands if you reach into the drum while it is turning Do not reach into the drum wh
35. selected programs The more indicator lights light up the higher the program s consumption This enables you to compare the consumption levels of the different programs when choosing your program settings and to decide on an energy and water saving program setting Energy saving mode The display panel lighting goes out after a few minutes and start button flashes To activate the lighting press any button Energy saving mode is not activated if a programme is running lf the laundry is subsequently dried in a tumble dryer select the spin speed according to the tumble dryer manufacturer s instructions Depending on the model en Getting to Know the appliance Getting to know the appliance Washing machine Open the door Close the door Service flap Detergent dispenser Control panel Door GY OO eB CO Control panel Getting to Know the appliance You can find possible programme default settings and additional programme settings in the overview these differ depending on the model Programme default settings can be changed Overview of all programme default settings gt Page 13 additional programme settings can be selected Overview of all additional programme settings gt Page 14 Start button for starting interrupting e g adding laundry and cancelling a programme Programme selector for selecting the programme and for switching the washing machine on and
36. selected program e g 2 30h hours minutes 2 Press the Ready in Finished in button repeatedly until the required number of hours is displayed 3 Press the DII button The program starts The selected number of hours e g 8h is shown in the display panel and counts down until the wash program Starts The duration of the program is then displayed Note The length of the program is automatically adjusted when the program is running Certain factors can affect the program length e g m Program settings m Detergent dosage additional rinse cycles if required due to foaming Load size type of textiles water absorption differs m Imbalances e g due to fitted sheets are offset with several start ups of spin cycles m Fluctuations in power supply Water pressure infeeding speed Following the start of the program you can change the preselected number of hours as follows 1 Press the Dll button 2 Use the Ready in Finished in button to change the number of hours 3 Press the DII button Following the start of the program you can add or remove laundry as required 13 en Additional programme settings Additional programme settings Note You can find possible additional programme settings in the overview these differ depending on the model SpeedPerfect EcoPerfect 0 Button with two possible settings for adapting the selected program u U SpeedPerfect Washing
37. t can damage Surfaces and components in the machine Do not use cleaning agents that contain solvents Machine housing control panel m Wipe the housing and the control panel with a soft damp cloth m Remove the detergent residue immediately Do not clean with a water jet Drum Use chlorine free cleaning agents do not use steel wool If there are odours in the washing machine or to clean the drum run the Drum Clean 90 C or 4 Cottons 90 C program without laundry Add washing powder 20 Descaling Descaling should not be necessary if the detergent is measured out correctly However if it is required follow the manufacturer s instructions for the descaling agent Suitable descalers can be obtained via our website or from our after sales service Page 25 Detergent drawer and housing If the washing machine contains detergent or fabric softener residues 1 Pull out the detergent drawer Press down the insert and fully remove the drawer 2 To remove the insert Push the insert upwards from below with your finger 3 Clean the detergent dispenser tray and insert with water and a brush and dry it Clean the inside of the housing as well 4 Fit the insert and lock It in place push the cylinder onto the guide pin 5 Push in the detergent drawer Note Leave the detergent drawer open so that any residual water can evaporate Detergent solution pump blocked Z Warning R
38. the rating olate he washing machine is only connected to an alternating current via a properly installed earthed socket Ihe mains plug fits the socket m Ihe cable cross section is adequate m The earthing system is properly installed m Ihe mains cable is only replaced by a qualified electrician if this is necessary Replacement mains cables are available from the after sales service No multiple plugs couplings or extension cables are used m lf an earth leakage circuit breaker is used only a type which displays this symbol is used Ax Only this symbol guarantees compliance with the currently applicable regulations m he mains plug can be accessed at all times m Ihe mains cable is not bent squashed modified cut through or in contact with heat sources Before washing for the first time The washing machine was thoroughly tested before leaving the factory To remove any water that may be left over from the test run the first wash cycle without any laundry Notes m The washing machine must be correctly installed and connected Page 26 m Never use a damaged machine Inform customer services Check the machine Remove the protective film from the control panel Connect the mains plug Turn on the tap Close the door do not load any laundry Depending on the model run the Drum Clean 90 C or 4 Cottons 90 C program For AU variant two cycles of Cottons 90 C
39. tment Il and start the Spin Drain Y program 31 You can find the contact information for all countries in the attached after sales service directory Robert Bosch Hausgerate GmbH Carl Wery StraBe 34 81739 Munchen GERMANY 9001051717 9503
40. upply hose and tap The filter filters dirt particles out of the water Water filter must be cleaned regularly to remove contaminants This will prevent blockages See also separate installation and cleaning instruction for water filter Positioning and connecting en 2 Open the water tap carefully checking the leak tightness of the connection points The screw connection is under mains water oressure Water outlet Caution Water damage If the drain hose slips out of the wash basin or the connection point during draining due to high water pressure any escaping water may cause water damage Secure the drain hose so that it cannot Slip out Note Do not kink the water drain hose or put strain on it lengthways You can lay the water drain hose as follows Outlet in a sink Warning Risk of scalding When you are washing at high temperatures there is a risk of scalding if you come into contact with hot detergent solution e g if hot detergent solution is being drained into a wash basin Do not reach into the hot detergent solution Caution Damage to the appliance fabrics If the end of the drain hose is immersed in the drained water water may be sucked back into the appliance and may damage the appliance fabrics Make sure that The plug does not block drainage from the sink The end of the drain hose is not immersed in the drained water The water drains away quickly enough ZX
Download Pdf Manuals
Related Search