USER`S MANUAL - fujitsu general
Contents
1. which is built for maximum precision provides more than 99 99 effective pixels You may find however that some pixels constantly remain lit or dimmed The display has a fan to prevent its internal temperature from rising Be careful with the air delivered by the fan It may be very hot Contact your dealer if you find that the display does not seem to function properly when used with other audio visual equipment You may need to move your display if it produces degraded pictures or noise due to electromagnetic radiation or if the infrared remote control does not function properly Pictures may not be displayed properly if you connect a non standard PC to the RGB input terminal In this case contact your dealer for more information The protective circuit built into the display automatically turns off the power if the display has a problem In this case you will see that the power indicator lamp flashes red or green Oy power switch e When pressed while in the OFF state the power indicator lamp lights and the display is placed in the ON state and the power can be turned ON or OFF by the remote control or on the control panel of the display When pressed while in the ON state the power indicator lamp goes out and the display is placed in the OFF state where power is still partly supplied Warning If the power indicator lamp flashes red or green this signifies that the display ha2. Desktop Stand unit P TT6300 When installing an option make sure that all installation requirements for that option as given in the relevant instruction manual are met The colours of options do not match the display colours perfectly To improve the function and performance of optional accessories specifications and part names may change Consult your local dealer before purchasing Warning To prevent injury fire and electric shock arrange for options to be initially installed or installed at a different location by your dealer CAUTION This display P63XHA30E is for use only with Fujitsu General Limited s option P WB6300 P CT6300 P TT6300 Using this display with other option can cause instability resulting in possible injury E 6 SPECIFICATION Screen size P63XHA30E 63 wide screen 139 3 cm W x 78 3 cm H 159 8 cm diagonal 54 8 inch W x 30 8 inch H 62 9 inch diagonal Aspect ratio 16 9 wide Weight 72 kg 159 Ibs Outer dimensions 150 6 W x 89 6 H x 12 3 D cm 59 3 W x 35 3 H x 4 8 D inch does not include outer projections Power supply 110 240 VAC 50 60 Hz Current rating 7 9 3 0 A Number of pixels 1366 H x 768 V Operating conditions Temperature 0 to 40 C 32 to 104 F Humidity 20 to 80 Accessories Regulation e UL CSA Safety UL6500 C UL 1 remote control 2AA batteries 1
3. block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifier s that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer E 2 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any AM way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture do
4. built in installation such as a bookcase or rack unless proper ventilation is provided and the manufacturer s instructions have been adhered to For proper ventilation separate the product from other equipment which may prevent ventilation and keep distance more than 10 cm This product should be operated only from the type of power source indicated on the label If you are not sure of the type of power supply of your home consult your product dealer or local power company This product is equipped with a three wire plug This plug will fit only into a grounded power outlet If you are unable to insert the plug into the outlet contact your electrician to install the proper outlet Do not defeat the safety purpose of the grounded plug Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them Pay particular attention to cords at doors plugs receptacles and the point where they exit from the product For added protection for this product during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the cable system This will prevent damage to the product due to lightning and power line surges Do not overload wall outlets extension cords or convenience receptacles on other equipment as this can result in a risk of fire or electric shock Never push objects of any kind into th
5. cO FUJITSU USER S MANUAL 63 WIDE PLASMA DISPLAY Plasmavision W P63XHA30E Contents Page Before Use Safety PFECAUTIONNS to vet neteeetedacniteiennnaneeneennsueenoemeaueeiaevaedtasee sie ibaaniassosatadenbancties E 2 E 3 ACCESSOPIES rrtettttsteteeteteeeeeeeseeeeeeneneeeeseeeeaeseeenanaeaeeenanataeeetasaeeseaeaeneeseeeaeneeaeeeaseanas E 4 Handy Tips A a r A tes E 4 Installation eseteeeeteeeteeeeeeeeeeeeeeeeeeeeeeeeaeeeeenaeaeeenanaeaeeenaeaeeeeeeasaeeeeeeaseeeseaeaseseaeeenananas E 5 Others Options uoiu aunovendaSenetuupdoucewcuscasan sletwaucensntshedeseedusaswansteusananGcemsiescwenuuecessentuesavaseuurons E 6 Specification E A stony Sioue bedlaionsiapeuiteain apenas saws E 7 Plasmavision is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan the U S A and other countries or areas FUJITSU GENERAL LIMITED SAFETY PRECAUTIONS IMPORTANT INFORMATION IMPORTANT n RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol within CAUTION The exclamation point within an equilateral triangle an equilateral triangle is intended to alert the user TO PREVENT THE RISK OF ELECTRIC is intended to alert the user to the presence of to the presence of uninsulated dangerous voltage SHOCK DO NOT REMOVE COVER OR important operating and maintenance servicing within the product s enclosure that may be of BACK NO USER SERVICEABLE PARTS ins
6. instruction manual 1 power cable 2 big ferrite cores 2 small ferrite cores EMC FCC Part 15 Class B ICES 003 Class B e CE Safety EN60065 EMC EN55022 EN61000 3 2 EN61000 3 3 EN55024 EN61000 4 2 EN61000 4 3 EN61000 4 4 EN61000 4 5 EN61000 4 6 1996 EN61000 4 8 1993 EN61000 4 11 1994 e AS Safety IEC60065 EMC AS NZS 3548 1995 1995 1998 1995 1996 1995 1995 1998 Class B
7. is product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the product Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltages and other hazards Refer all service to qualified service personnel Unplug this product from the wall outlet and refer service to qualified service personnel if the product does not operate normally by following the operating instructions Adjust only those controls that are covered by the Operation Manual as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer or with same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards Upon completion of any service or repairs to this product ask the service technician to perform safety checks to determine that the product is in proper operating condition The product should be placed more than one foot away from heat sources such as radiators heat registers stoves and other products including amplifiers that produce heat When connecting other products such as VCR s and personal com
8. puters you should turn off the power of this product for protection against electric shock Do not place combustibles behind the cooling fan For example cloth paper matches aerosol cans or gas lighters that present special hazards when overheated Use only the accessory cord designed for this product to prevent shock The power supply voltage rating of this product is AC110 240 V and the power cord attached conforms to the following power supply voltage Use only the power cord designated by our dealer to ensure Safety and EMC When it is used with other power supply voltage the power cable must be changed Use the standard power plug and cord set of the specified country Power supply voltage AC 100 125 V AC 200 240 V AC 240 V SAA TYPE Consult your product dealer Power cord E 3 ACCESSORIES CHECKING ACCESSORIES One remote Two AA batteries One user s One power cable Two big ferrite Two small ferrite control manual cores cores Ca CDe HANDY TIPS e Have the display inspected and cleaned by your dealer at regular intervals e Pictures may become burnt into the screen phosphors if the screen is left on for extended periods To ensure that the display has a prolonged service life be sure to use a screen orbiter white screen This will ensure the same picture or pattern is not constantly displayed for long periods The plasma display panel
9. s developed a problem When this happens be sure to remove the power plug from the receptacle to prevent fire or electric shock Then contact your dealer INSTALLATION To prevent the display s internal components from overheating make sure that the display is installed in a well ventilated location Be sure to use the optional stand wall mounting unit or the other unit when installing the display Also be also sure that your dealer performs the installation See the appropriate instruction manual for more information on the installation hardware you select To prevent an accident and ensure safety in the event of an earthquake fix the display securely into position as described below To ensure proper heat radiation provide at least as much space around the display as shown below Make sure that the display is installed in a location where the temperature can be maintained between 0 C and 40 C Never attempt to tilt the display sideways or backward To prevent the power and other cables from being accidentally pulled make sure that they run along the wall or through corners The display can be installed with either of its sides facing down Front Side Upper cm cm 10 m 10 10 Left gt lt gt Right Wall ts Lower 5 OPTIONS Wall mounting Bracket 0 to 15 mounting angle P WB6300 Ceiling unit 0 to 15 mounting angle P CT6300
10. s equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help IMPORTANT SAFETY INSTRUCTIONS Electrical energy can perform many useful functions This unit has been engineered and manufactured to assure your personal safety But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD In order not to defeat the safeguards incorporated into this product observe the following basic rules for its installation use and service Please read these Important Safeguards carefully before use 1 Read these instructions 2 Keep these instructions 3 Heed all warnings 4 Follow all instructions 5 Do not use this apparatus near water 6 Clean only with dry cloth 7 Do not
11. se not operate normally or has been dropped Unplug this product from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning Do not use attachments not recommended by the product manufacturer as they may cause hazards Do not use immediately after moving from a low temperature to high temperature as this causes condensation which may result in fire electric shock or other hazards The apparatus shall not be exposed to dripping or splashing No objects filled with liquids such as vases shall be placed on the apparatus Do not place this product on an unstable cart stand or table The product may fall causing serious injury to a child or adult and serious damage to the product The product should be mounted according to the manufacturer s instructions and should use a mount recommended by the manufacturer When the product is used on a cart care should be taken to avoid quick stops excessive force and uneven surfaces which may cause the product and cart to overturn damaging equipment or causing possible injury to the operator Slots and openings in the cabinet are provided for ventilation These ensure reliable operation of the product and protect it from overheating These openings must not be blocked or covered The openings should never be blocked by placing the product on bed sofa rug or other similar surface It should not be placed in a
12. tructions in the literature accompanying the sufficient magnitude to constitute a risk of electric INSIDE REFER SERVICING TO QUALIFIED appliance shock to persons SERVICE PERSONNEL WARNING This is a Class A and Class B product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures WARNING TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE FCC NOTICE e A Class A digital device This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense e A Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation Thi
Download Pdf Manuals
Related Search