Safety Notice Implementation to the User Guide
Contents
1. Safety Notice Dear user Thanks for choosing WindRunner self balancing vehicle Please read and understand the following content for your safety and for you fun WindRunner is a new type of electric vehicle in some region it s illegal toride WindRunner on public road Please inquire local government for detailed law rules DO NOT RIDE ON MOTORWAY IN ANY CONDITION AND AT ANY PLACE 1T S EXTREMELY DANGEROUS UPTECH ROBOTICS AND ITS DISTRIBUTOR WILL NOT BE RESPONSIBLE FOR ALL LOSS WHEN RIDE ON MOTORWAY Read understand and follow the instructions issued on the User Manual especially the chapter 6 Safety guide New rider or experienced rider is safe When half experienced user who has already ride 2 10 hours they will drop theirguard and attempt dangerous riding behavior Most crushes amp accidents occursin this period Please DO NOT act any dangerous riding for your and others safety Once you start to use the WindRunner that represents you have read understand and acceptall contents on this safety notice and onthe User Manual Ifyou wil notacceptthem pleasecontactyour vendor Implementation to the User Guide To avoid the battery over dis arge the battery packis not instaled on the e mainframe inthe package You need to mount the battery package onto the mainframe The screws and screw drivers are in the package The battery changing guide could be find on2. chapter 7 3 1 of the User Manual Inextreme case the new battery pack will be low voltage if you mount the battery and power on the WindRunner found low voltage warning sound and the indicator LEDs is blinking please charge the battery 3 4 hours and then try power on again Please full charge the battery when g you will not use the WindRunner more than 1 week and less than 3 weeks m transport the WindRunner and take 1 3 weeks Please full charge and dismount the 2 battery packs when g you will not use the WindRunner more than 3 weeks g transport the WindRunner and take more than 3 weeks g Otherwise the battery will discharge slowly and trigger low voltage protection even if you powered off it with the remote key In some case typically if the ambient temperature changes the WindRunner will spin slowly without moving the operate bar or the mainframe will pitch when rider turns left right This shows the internal sensors need to re calibration Please perform the following steps 1 Power on Let the WindRunner lean on solid wall keep stationary press Lock button on the remote key to enterlock mode then press Battery Indication button 4 times This will enter the gyroscope calibration program and you will hear beep and see the blue LED shows on in sequence Wait 3 seconds the blue LEDs will be off which indicates the balancing sensor assembly calibration is done 2 When in lock
3. mode press the Speed Limit key 4 times This will enter the turning sensor calibration program and you will hear beep and see the blue LED shows on in sequence Wait 1 second the blue LEDs will be off the turning sensor calibration is done F when calibration procedure is done press ON OFF b tton quittock m deand yo can ride 2012 UPTECH Robotics TEL 400 088 6780 86 10 82114870
Download Pdf Manuals
Related Search