Solar Metal 3 LED Spotlight User Manual
Contents
1. damage any wires fig 2 3 Replace the spent batteries with new batteries making sure the polarity is correct fig 2 4 Replace the back cover and tighten screws fig 3 2 Note This product uses 2 x AA NiCd batteries The rechargeable batteries must be allowed to fully charge to operate properly Partially charging the battery on a consistent basis will drastically reduce the life of the battery Caution Insert batteries with the correct polarity Do not mix old and new batteries Do not mix different types of batteries Alkaline standard carbon zinc or rechargeable NiCd Never short circuit the battery terminals Do not dispose of batteries in the fire batteries may explode or leak Remove batteries during long periods of non use or when product is stored Dispose of batteries safely MAINTENANCE 1 It is recommended to clean the solar panels with a damp cloth on a regular basis DO NOT USE CHEMICALS OF ANY KIND TO CLEAN 2 Solar lights are weatherproof but during winter or cold temperatures below 0 C 32 F it is best to remove them and wait until the extreme weather dissipates2. INSTRUCTION MANUAL SOLAR SPOT LIGHT 508 000 INSTALLATION INSTRUCTIONS BATTERY REPLACEMENT Find a location for your light where there is no Fa surrounding shade or light sources that will affect the operation of your solar light Set the On Off switch to the Off position and allow for a full day s charge Once the lights have charged you liay can set the On Off switch to the On position You will need to do this only when you set them out for the initial charge or after battery replace ment Once set to the On position the lights will automatically turn on at dusk and off at dawn On Off Switch 1 Place the garden spike into the ground 2 Connect the support pole i to the garden stake 3 Connect the solar spot light onto the support pole TROUBLE SHOOTING If the light does not turn on in the evening do the following 1 Check the surrounding area for high ambient lights such as porch lights streetlights etc 2 Make sure the switch is at the On position 3 Make sure solar panel is not located in a shady area where sunlight is not reaching the unit 4 Make sure the batteries are making contact with the terminals See BATTERY REPLACEMENT to learn how to access battery area 1 Switch the On Off switch to the off position and remove the four 4 screws on the back of the solar light fig 1 2 Remove the back cover from the solar panel taking care not to
Download Pdf Manuals
Related Search