TUBULAR FONT - Restaurant Supply Store
Contents
1. POURING PERFECTION Marco Beverage Systems Ltd INSTRUCTIONS FOR MODEL TUBULAR FONT P N 1000585 With Square Drip Tray Marco Beverage Systems Limited 63d Heather Road Sandyford Industrial Estate Dublin 18 Ireland Tel 353 0 1 295 2674 lreland Fax 353 0 1 295 3715 email sales marco ie www marco ie Marco Beverage Systems Limited Shire House Strixton Manor Strixton Wellingborough Northants NN29 7PA UK Tel 44 0 2072 744 577 UK Fax 44 0 2079 788 141 email sales marco bev co uk www marco bev co uk Page 2 of 4 Instruction Booklet 1000585 Tubular Font 10 08 09 doc INSTALLATION Mounting e Drill the counter using the dimension on drawing provided The Font is then securely mounted as shown above using the screws washers and nuts provided The wires and water outlet tube should pass freely through the large hole through to the underside of the counter Plumbing e The silicone tube from the under counter boiler should be attached to the black fitting using the provided clip This should be securely tightened to ensure no leaks Electrical e The wires from the font consist of 2 male bullets These should be connected to the wire coming from the under counter boiler USING THE FONT The font is simply activated by pressing the switch in the top The font will either dispense a set amount of liquid after a single press or need to be pressed continuously to dispense the req2. uired amount of liquid The dispense functionality is determined by the electronics in the undercounter boiler and not changeable at the font The drip tray should be emptied on a regular basis CLEANING The exterior of these fonts may be cleaned with a damp cloth and a light detergent Do not use abrasive cloths or creams as this will spoil the finish of the font Do not use a water jet or spray Beware of accidentally operating the font when cleaning the front of the machine RISK OF SCALDING Beware of accidentally operating the font especially when cleaning the front of the boiler The utmost care has been taken in the manufacture and testing of this unit Failure to install maintain and or operate this font according to the manufacturer s instructions may result in conditions that can cause bodily injury or damage to property If in doubt about the serviceability of the font always contact the manufacturer or your own supplier for advice Instruction Booklet 1000585 Tubular Font 10 08 09 doc Page 3 of 4 Drilling Template MARCO is an 1S09001 2000 Registered Company
Download Pdf Manuals
Related Search