3G Camera User Manual
Contents
1. 4 brightness decrease 5 Image direction volume up volume down 13 Check status Authority Master normal Users Guest If user wants to know the present setting and work status of camera he she just needs to send one of following SMS to camera it will reply SMS including all settings except the password For master and normal users getstatus 7 For guest getstatus password 14 Getting help Authority Master Users Guest 14 If forget the SMS command user can send SMS to get the help Get normal command help Authority Master normal users guest User sends following SMS command to camera For master and normal users help 15 Reset the camera Authority Master If the remote camera setting is wrong or fail to work even after restarting the camera The following methods will enable the remote camera recover to original settings clear of all users setting and back to regular working status Using the master s phone to send the following SMS to camera begin password After the successful factory default setting System Recover successfully Note This SMS command must add password or the camera will reply the SMS order wrong Only the master have the right to make the camera recover to original settings The others who send this command will receive the SMS Sorry you do not have the right to operate Chapter 6 Maintenance 1 Store and use2. advanced operation 13 Check status help Get help Refer to 5 advanced operation 14 Getting help begin password Reset the camera Refer to 5 advanced operation 15 Reset the camera
3. alarm Unless press the emergency key on the remote control All connected wireless sensors do not work Method 1 send following SMS command to camera Master and normal users disarm Method 2 press the key of Disarming on the remote control You can hear tick sound if operation successful And receive Disarming successfully SMS Then the indicator light turns green and flashes 7 wireless sensor Authority Master normal Users Any 315MHz or 433MHz wireless sensor such as infrared motion detector wireless door magnet wireless smoke sensor etc can be set as alarm sensor of the camera Add wireless sensor 1 Power on the wireless sensor 2 Master or normal users send following SMS command to camera and the camera will enter into the state to add new wireless sensors status Zadd sensor sensor name The sensor name should be English or Arabic number Max 50 letters It is named by Master to identify different alarm in the future For example addsensor door 11 If the SMS doesn t contain the name of sensor you can send addsensor to the camera After receiving the SMS command the camera will sound tick sound and the indicator light will flash with red and green alternately Then send SMS Waiting to add learn sensors Trigger the sensor to send signal immediately How to trigger sensor to send signal For example for wireless door magnet make it open and close once to send the signal to th
4. 3G REMOTE CAMERA User Manual 3G REMOTE CAMERAS User Manual Thank you for purchasing the 3G Remote Camera The user manual illustrates how to operate this product so please read the user manual carefully before using it With this high tech wireless equipment you can detect anywhere at anytime by dialing video calls with 3G mobile phone The 3G remote camera can be widely used in house school shop moving cars trains or take care of elders and children as long as WCDMA network is available Modern design 3G Remote camera matches excellent 300 000 pixel camera you can send SMS command to make images and videos store in the camera With the built in high light infrared LED the camera can shoot clear film even in darkness The Remote camera is compatible with normal 315 MHz or 433 MHz wireless sensor in the market such as wireless infrared motion detector door sensor smoke detector etc and all of them are wireless easy to use You can also select any kind of sensor mentioned to work with our product You or your family or your guards can receive the alarm message with your preset ways such as SMS voice call video call which are stored as evidence when the wireless sensor was triggered All services and functions needs to be supported by the network and USIM card Detailed operation and product functions please refer to this brochure For Your Safety m The product complies with the relevant Chinese standard about electromagneti
5. 6 No Trouble Possible Reason Solution description time supplied with hour then restart camera the battery only If the above operations can not solve the problem you meet please contact local distributor Chapter 8 Main Technical Parameters Power adaptor Input 100V 240V 50Hz Output 5 5V DC Work temperature 10 C 45 C Store temperature 20 C 60 C Relative Humidity 10 9096 without condensation Working frequency HSDPA UMTS 850 1900 2100 MHz EDGE GPRS GSM 850 900 1800 1900 MHz Wireless sensor receiving code ASK Wireless sensor receiving frequency 315 433 MHz Wireless sensor baud rate 500 2500bps Max wireless sensor 5unites Effective distance of the wireless remote control 100 Meters wide area video format 3GP Camera pixel 300K pixel Camera Shooting angel 60 degree horizontally 60degree vertically Best shooting distance in night lt 6 meter Lithium battery 800mAh Battery standby time 24 hours close the infrared light Affected by network Appendix SMS command list SMS Command i master Master Activate Refer to Chapter 4 Quick Start 1 Start remote camera password old passwordinew password Modify password Refer to Chapter 5 Advanced operation 2 Modify the password newmaster newmaster number tens Modify Master number Refer to Chapter 5 Advanced operation 3 change master number adduser users numbers Add users number Refer to Chapte
6. c compatibility However please keep away from electronic equipment which is likely to interfere by the wireless signal to avoid the signal interruption W Switch off this product in any area marked Explosive might explode closed wireless transceiver devices etc m Do not dispose the product in a fire otherwise it may cause the battery explosion H Only use the power adaptor approved by the product manufacturer The use of any other types may damage the product E Keep the product and the accessories out of the reach of children Declaration W We operate a policy of continuous development We reserve the right to make changes and improvements to any of the products described in this document without prior notice E For latest product information We don t guarantee for the document veracity reliability or any content except regulate in proper laws Including no guarantee for product suitable market or suitable area promise W Use only this product legally Do not monitor other one s private places We don t take any charge for the illegal use of this product 2 m Under no circumstances should be responsible for any loss of data or income or any special incidental consequential or indirect damages howsoever caused W The contents of this document are provided as is Except as required by applicable law no warranties of any kind either express or implied including but not limited to the implied warranties of merchantab
7. e call until getting through Chapter 5 perform the operation 1 Activate remote camera Authority Master When first time using or after resetting the remote camera it needs to set the master number to activate the camera so that it can automatically send alarm message to the master Master should send a SMS command camera like this master After activating the camera it will reply you Welcome to use remote camera the password is 1234 Note If the camera has been activated before the old master number will be saved in it If you try to activate it again it will reply SMS Master already exists 2 Modify the password Authority Master Modify the password of the camera after initiation to ensure operation safety Only master can change the password Master can send following SMS command to camera to change the password password old password new password For example password 1234 8888 The password is a 4 digit number The default password is 1234 After succeed to change the password the camera will send SMS to you The password has been successfully changed The new password is If others send above SMS command to camera it will reply Sorry you are prohibited to request this command 3 Modify the telephone number of master Authority Master Only the master can modify the telephone number of master Old master can send following SMS command to camera to change the password ne
8. e camera If the sensor added successfully the camera will sound tick sound then exit the learning status and reply Adding sensor successfully If the camera fails to load the sensor or no sensor exists the indicator light of the camera will flash with red and green alternately for about one minute then the camera will exit the loading status automatically and back to the previous arming or disarming status Max 15pcs wireless sensors can be added to the remote camera If reaching its max number the camera will send SMS The sensors are full Please delete old sensors before add new ones If the sensor description invalid the camera will reply Sensor name invalid please rename the sensor Delete all wireless sensors Master or users send following SMS to camera delsensor After successful deletion it will reply All sensors deleted successfully Guest is forbidden to do this operation If guest send above SMS command to camera it will reply Sorry you do not have the right to operate 8 Infrared light Authority Master normal users Infrared light enable the camera to have a real time video clearly in dark night Camera can control the infrared light automatically However if AC power failure and user wants to close the infrared light to save the battery power master or normal users members can send following SMS command to close the infrared light Close infrared light Send the following SMS t
9. f 3G network is weak the system will change to GSM network and video call prohibited Therefore the camera should be located at the place where strong network signal available m After installation try to dial video call with 3G cell phone to check the video image Re locate the remote camera and adjust the camera s angle to get best image Chapter 4 Quick Start Note Assure that USIM doesn t activate the caller transferring function and in coming call display close the PIN code as well Power on off Power on turn the power switch to upside On position The indicator light will be on continuously with red color for 3 5 seconds then change to flash slowly After about 35 seconds the indicator light changes to green color and flashes slowly indicates disarming status or green color lighted continuously indicates arming status which indicates that the camera has found the network and begun to work At this moment a sound of tick can be heard from the camera More information of the status please refers to indicator light status instruction Power off Turn the power switch to downside Off position 1 Start Remote camera Edit and send the following SMS to camera master After sending the above SMS successfully your phone will get a reply SMS Welcome to use 3G remote camera the password is At this moment your telephone has been set as authorized Master number 2 Active remote contro
10. ility and fitness for a particular purpose are made in relation to the accuracy reliability or contents of this document We reserve the right to revise this document or withdraw it at any time without prior notice Chapter 1 Product Features IA IA IA IA IA IA IA IA IA IA IA IA This product uses USIM card supporting WCDMA 3G network Matching CMOS camera and infrared led it supports wireless video monitoring in 24 hours You can send SMS to control camera remotely and check anywhere secretly and safely Multimode alarm Camera can send alarm messages by SMS video call voice call Sensor detection Max 15 wireless alarm sensors can be added Support to record the alarming image to the camera Up to 10 telephone numbers can be pre stored in the system Wireless remote control it can arm disarm or send emergency alarm Special Camera 300 000 pixel CMOS camera Easy installation Wireless connection The product can be installed at any place you wanted Built in Lithium battery Rechargeable battery ensuring operation in case of external power failure Real time video you can call the video phone to check the image of monitoring area anytime and anywhere Application taking care of the elders and children in house school monitoring shop bus ship and train etc Chapter 2 Terms Explanation Any mobile phone compatible with WCDMA can see the monitoring area by dialing video call Any mobile
11. insufficient fee ofthe USIM for the card works card Indicator light is USIM card not install properly Can t find or identify the i 3 constantly in red Power off the camera and check it USIM card i color again Camera didn t Switch off the power check USIM 4 response to any Camera work abnormally card or reset to factory setting operation Network signal weak or Place the camera at other place After starting the i eo network busy with strong signal and try again camera indicator PIN code of USIM card 5 light flashes in red i Close the PIN code active color and can not Contact with local operator to turn to green USIM card invalid i check of it Remote control Connect external power to Camera low power can t work Or recharge the battery 6 work slowly Or Remote control low battery Change remote control battery operating range Didn t pull out the antenna Pull out remote control antenna shortened Didn t pull out the antenna Try only one remote control The remote control or sensor Exit the loading status already exists Can notadd new The sensor quantity already Delete old sensors before add new 7 remote control or reaches its max number sensor areles gens or Didn t set master number Set master number before add sensor 8 Can t start the Battery runs out of power Connect the camera to external AC camera after long power and charge for at least one 1
12. l After starting press and hold the Set key at the rear board of the camera for 2 seconds The indicator light changes to flash with orange color indicating that the camera has switched to loading status Then press any key of the remote control to send signal to the camera the indicator light of the remote control will turn on After receiving the new remote control signal successful a tick can be heard from the camera Press Set key again to exit the loading status Otherwise 7 it will automatically exit after 30 seconds 3 Arming Press Arming key directly on the remote control If successful set a tick sound can be heard from the camera and the indicator light of the camera will turn on continuously with green color 4 Disarming Press Disarming key directly on the remote control If successful set a tick sound can be heard from the camera and the indicator light of the camera will flash in green color 5 Incoming video call Master and normal users who dial the camera with 3G mobile phone can watch the monitoring area after 6 tick sound Unauthorized access will be rung up when dialing 6 Press the emergency key to trigger an alarm Press the emergency key on the remote control the camera will firstly send SMS to master to inform SOS and then dial the phones of master or users members one by one However if the 3G network not available the camera will dial the voic
13. lash slowly with orange color Then press any key of the remote control When the host receives the new wireless remote control signal a tick sound will be heard and the indicator light will turn green for 2 seconds then turn to orange and flash slowly User can continue to add other more remote controls at this moment The camera will automatically exit from the loading status after 15 seconds or press the set key to exit directly Max 5 remote controls can be added 6 2 Delete remote control 10 Authority Master normal users Master or normal users can send following SMS to camera delre Camera will reply All remote controls deleted successfully If guest send above SMS command to camera it will reply Sorry you do not have the right to operate 6 3 Arming Authority Master normal Users If the camera indicator light shows in green color and flashes it indicates that the defense status has been canceled no alarming status To recover the defense arming state you can do following operation Method 1 send following SMS to camera Master and normal users arm Method 2 Press the Arming key on the remote control directly and you can hear tick sound indicating successful operation The camera will reply you SMS Arming successfully and the indicator light on the camera will turn green and keep on continuously 6 4 Disarming Authority Master Users In disarming status camera will not
14. o camera ir 0 After successful set it will reply Infrared light closed Once turn off the infrared light it can t take clear video in dark night User needs to send SMS to start the infrared light Turn on infrared light default setting Send the following SMS to camera ir l After successful set it will reply Infrared light turns on 9 Take photos 12 Authority Master normal users After receiving SMS command of taking photos the camera begins to capture images The imagine quantity is decided by the SMS command max 9 photos Send the following SMS to camera shot image quantity System begins to take photos according to the quantity in the SMS and store them in the camera After successfully set camera will reply Set of photo taken successfully 10 Video record Authority Master normal users After receiving SMS command of recording video the camera begins to record video The time can be set within 3600 seconds Send the following SMS to camera record time 0 3600 After succeed setting camera will reply setting of video record successfully Record video when taking a video call When wireless sensor or infrared motion detector triggered the camera system will start to dial video call and record it in flash when the video call answered Users can also read the video document by inserting USB port to computer to provide the proof to Police for investigation 11 Automatic alarm Maste
15. phone with SMS function can control the remote camera with SMS command Make sure to remember the product s password and USIM number Don t disclose to others to ensure your privacy safety User Authorization Level There are two levels remote camera user with different authority Master only one Master needs to store his her mobile number into the camera first Otherwise all the functions of the remote camera are disabled Only one master mobile number can be set in the remote camera The camera will send the alarm message to master s mobile number and his her family or emergency numbers set by the master Master should clearly remember the password and USIM number Only master has the authority to change the camera password and the family or emergency numbers Normal user max 10 Users members have the right to access to video call add the sensor amp remote control and receive alarm Their numbers are set by the master Difference authority between Master and normal users Administer Normal users Function Change user list Receive SMS Automatic Receive voice alarm calling Alarm Receive video alarm calling Dial the phone Monitor by dialing voice call number Monitor by dialing video call Send SMS command Add modify delete sensor Check status and obtain command help Change password System Recovery Arming Automatic alarm Arming is to make the remo
16. r 5 Advanced operation 4 Add users number deluser users number Delete users number Refer to Chapter 5 Advanced operation 5 Add or delete users number farms Set defense Refer to Chapter 5 Advanced operation 6 3 Set defense Master disarm Cancel defense Refer to Chapter 5 Advanced operation 6 4 Cancel and users defense addsensor sensor description Add or modify sensor Refer to Chapter 5 Advanced operation 7 wireless sensor Master delsensor and Delete sensor Delete all sensor refer to Chapter 5 Advanced operation normal 7 wireless sensor delre Delete remote control Refer to Chapter 5 Advanced operation 6 2 Add or delete users remote control Master Close infrared light irtO and ir l normal Turn on Infrared light ere Refer to 5 advanced operation 8 infrared light Master shot image quantity and take photos Hora image quantity 1 to 9 Refer to Chapter 5 Advanced users operation 9 take photos Master an 18 normal users Master and normal users Master and normal users Master and normal users Guest Master time 0 to 3600 Refer to Chapter 5 Advanced operation 10 video record No SMS when alarm sms 0 Send SMS when alarm sms 1 default Dail voice ET when call 0 call 1 Refer to 5 advanced operation Dail videotel when alar Automatic alarm ftgetstatusft Check status Refer to 5
17. r or normal user sends following SMS command to set the automatic alarm method Authority Master Users Open buzz alarm Master and normal users send following SMS beep 1 After successful set the camera will sound tick sound when alarming Close buzz alarm Default Master and normal users send SMS beep 0 Not send SMS when automatic alarm sms 0 After successful set camera will reply Set automatic alarm without SMS successfully Send SMS when automatic alarm Default sms 1 After successful set camera will reply Set automatic alarm with SMS successfully Call voice phone when automatic alarm call 0 After successful set camera will reply Set alarm automatic with voice call dialing successfully Call video phone when automatic alarm default call 1 After successful set camera will reply Set automatic alarm with video cell phone dialing successfully If you set alarm with video cell phone dialing but no 3G network available the camera will automatically converts to Voice call 12 Image parameter setting and volume adjustment Authority Master normal users Master and normal users can activate the real time video by dialing voice phone with 3G cell phone meanwhile it can also set image brightness focus direction and volume The operation definition of the correspondent key in video call as followed 1 Zoom in 2 Zoom out 3 brightness increase
18. t beside the USIM card slot with the tip of a pencil and pop up the slot Insert the USIM card into the slot then push the slot back to its place get back the rubber cover 2 The use methods of base board or bracket 2 1 Extend camera base board Hold the two sides of the camera and pull the head of it and the slot buckle will be opened Stand the head of the camera now and move it at any direction 2 2 Install the host in the bracket you can fix the bracket with screw then install the host Connect the adapter to an AC power and connect the mini USB plug to the power interface of the camera The product has a built in rechargeable Lithium battery The camera will notify you when the power supply changed For example if the power adapter is disconnected or the AC power is cut off it will show AC power off If the power adapter is connected again it will show AC power recovered 2 Fix base board bracket Fix the base board or bracket on the wall with the screws or located at suitable flat place having the camera opposite the monitoring area you need Choose the Installing position W For better image quality avoid the bright light irradiated directly into the lens of the 6 camera W tis suggested to located the camera at the place where can look down the monitoring place with the minimum angel 30 To prevent to be stolen it is suggested that the camera is located at the place above the ground more than 2 2 meters n I
19. te camera in working status In this status all connected wireless sensor are in working Under the arming if any wireless sensor is activated camera will send SMS or Video to call master mobile phone or automatically dialed master number to inform alarm immediately If the master doesn t answer the call it will dial the next pre set numbers until answered This process will repeat three times then exit dialing mode automatically if none of the pre set numbers answered Disarming Disarming is to deactivate the remote camera All connected wireless sensors don t work unless pressing the emergency key Incoming video call Real time video can be turned on when administer or normal users call the camera Setting All the set to this product can be completed by sending SMS Remote control illustration ae 1 2 a D ne Picture 2 Remote control Instructions 1 Antenna 2 Indicator light 3 Arming key 4 Disarming Key 5 Emergency key Indicator light Status Instruction Flash slowly Searching the network Red LED Hash quickly Sensor alarming Not installed SIM card or the remote camera damaged Arming Open the auto alarm function Flash slowly Disarming Close the auto alarm function Flash quickly Processing data Hash Wait to load remote control Chapter 3 Installation 1 Install the USIM card Remove the rubber cover from the left side of camera Open the USIM card slot by pressing the small do
20. telephone number Delete all the users members telephone numbers the format is as followed deluser After successful deletion of phone number the camera will send the following SMS User number eK deleted successfully or reply Fail to delete user number If the format of users members is incorrect in SMS the camera will send the SMS The user number is invalid please check and try again 6 The operation illustration of wireless remote control 3 keys Arming emergency key Disarming When press the Arming key the camera indicator will turn on green and the camera enter into the defense state If the wireless detector is activated by intrusion the camera will alarm and dial out video call voice call and send SMS When press the Emergency key the camera indicator will turn to green and flash quickly The camera will dial the master number and the emergency numbers orderly Live voice can be heard by answering the calling It will call master and all user numbers three times till answered then exit dialing automatically When press the Disarming key the camera indicator will turn green and flash slowly The camera will be out of defense state In this state the camera can alarm only by pressing the Emergency key A tick sound can be heard from the camera by pressing any remote control key 6 1 Add wireless remote control Press the set key on the rear board and the indicator light turns to f
21. the remote camera in suitable temperature Too high or too low temperature may damage the device 2 Try to keep the Host and all its accessories dry Do not store and use it in the bathroom or other place with high humidity Do not allow water or other liquids into the camera otherwise it might cause malfunctions 3 Do not store and use the camera in dusty environment 4 Do not use alcohol acetone and other similar solvents to clean it Wipe it with soft wet cloth 5 Do not attempt to open it randomly If the camera does not work normally try to resolve it as the guide of the general troubleshooting or the problem can not be solved contact the dealer immediately 6 Charge the battery at least 12 hours at the first time after power off to achieve the full performance of the battery To increase the life span of the battery connecting the camera Host to the power supply to automatically charge the built in Lithium battery for 4 hours every 3 months if the camera does not use for long time 15 Chapter 7 Common malfunctions No Trouble Possible Reason Solution description Can t start camera i Other master already set in p 1 Indicator light Recover to original default setting the camera works Calling line presentation or All functions PA MMS functions ofthe USIM Contact network provider to 2 card does not active active USIM card function Pay Indicator light
22. wmaster new master telephone number For example newmaster 13565802288 After successful set the old master will receive the SMS The new number is Old master number didn t have the authority to control the camera any more Add delete the telephone number of normal users Only the master can add or delete the telephone number of users Or others will receive the message sorry you don t have the right to operate 4 Add the telephone number of normal users CAuthority Master To be a user s member the master can send following SMS to store the user s member s cell phone number into the camera Maximum 10 user s numbers can be stored Add the telephone number of normal users the format is as followed adduser users members telephone number For example adduser 13477887788 After successfully set the camera will reply The user number has been successfully added If you add more than 10 telephone numbers the camera will send the following SMS to your mobile The user numbers are full Please delete numbers before you add new ones If you set the same telephone number the second time the camera will send the following SMS to your mobile user number already exists 5 Delete the telephone number of normal users CAuthority Master The master can send any SMS to the camera and delete certain telephone number of users members the format is as followed deluser users members
Download Pdf Manuals
Related Search