090616 Datasheet & User Manual Radar Barrier IPT-914_IPR-915
Contents
1. Down Menu Innovation in radar sensing Making happen what others only dream of CONFIDENTIAL AND PROPRIETARY The information contained in this document is the sole and exclusive property of InnoSenT GmbH and must not be disclosed by the recipient to third parties page 6 of 8 DATA SHEET amp USER MANUAL IPT 914 IPR 915 16 06 2009 Version 0 3 mooni il SENT Making happen what others only dream of Innovative Sensor Technology o The Write button saves the selected specifications to the sensor Afterwards the sensor automatically verifies the set soecs The progress of the action can be monitored via the status bar Frequency 24 1594 E Frequency 24 1594 E Writing A Write OK Picture 4 Status bar o If no error message occurs the sensor has been programmed correctly o The programmed sensor is now ready for operation and the next module can be programmed o The selection of frequency is saved while changing the module Therefore you will not have to perform a new selection o The selected data can be stored by using the menu point Save or by pressing the buttons Strg S together This data can be used for future sensors that have to be set to the same transmit frequency Ipro IPT 914 IPR 915 1 0 New File 2 o x File New Strg h Open Strg O Save Strg 5 Exit Strg E Disconnect m Settings Product iH Serial Number red Frequency H GHz2. a Monitor Picture 5 File Menu o The connection can be cancelled by pressing the Disconnect button or Strg E after finishing the task of programming sensors 2 3 Troubleshooting The following error messages can occur while programming cs 86 x 9 Sensor not connected No sensor connected to the programming kit check ZIF connection between sensor and proarammina kit x X Timeout Hardware not found Software does not find the programming kit check USB connection between proarammina kit and PC cs i X Erp a Port cannot be opened e g Port is occupied by another device vou have to choose a port that is free Innovation in radar sensing Making happen what others only dream of CONFIDENTIAL AND PROPRIETARY The information contained in this document is the sole and exclusive property of InnoSenT GmbH and must not be disclosed by the recipient to third parties page 7 of 8 DATA SHEET amp USER MANUAL IPT 914 IPR 915 16 06 2009 Version 0 3 Innovation in radar sensing linn osen e O ee Making happen what others only dream of Innovative Sensor Technology Ipro 8 I wd EURE eae Data cannot be read from the sensor sensor has to be proarammed aaain C xi x a niece Saved data is not readable check data file Ts xi X READ ERROR Provided data of sensor is faulty Sensor has to be proarammed aaain a x X WRITE ERROR Error while
3. Innovation in radar sensing Making happen what others only dream of DATA SHEET amp USER MANUAL Module Number Product Family Range of use Overall e The InnoSenT K Band Barrier consisting of Transmitter IPT 914 and Receiver IPR 915 is the new generation IPT 914 IPR 915 Long Range K Band Barrier Security applications of long range 24GHz radar barriers for perimeter protection in the field of security e The sensor provides a special RF Design for maximum sensitivity in long range applications wilInnoSent Innovative Sensor Technology e The programmable Tx Rx frequency and the switchable output powers FCC ETSI gives the user new options in the installation of the module and stock keeping e The Barrier is delivered with the IPRO programming kit to program the TX Rx frequency The programming kit IPRO consists of Index programming software IPRO programming adapter IPRO USB cable ZIF cable 1 DATASHEET 1 1 Basic Feature 1 2 Concept Drawing 1 3 Electrical Characteristics 1 4 Antenna pattern 1 5 Mechanical outline 1 6 Interface 2 USER MANUAL 2 1 Adjustment of output power 2 2 Programming of the transmit frequency with the programming kit IPRO 2 3 Troubleshooting Innovation in radar sensing page 1 of 8 Making happen what others only dream of CONFIDENTIAL AND PROPRIETARY page 2 page 2 page 2 page 3 page 3 page 4 page 4 page 5 page 5 p
4. ONTT Making happen what others only dream of Innovative Sensor Technology 1 3 Electrical Characteristics Parameter Symbol min typ max units comment Transmitter transmit frequenc of 24 000 24 250 GHz programmable channel spacing oo S 5 M 2 temperature drift frequency Aaf lt 0 kWz f a output power FCC Pornigh 24 dBm High Power Mode __ output power ETSI Porto 20 dBm Low Power Mode modulation frequency P 26 kHz ASK modulation positive supply voltage 5o S vy i positive supply current Receiver transmit frequency channel spacing IF amolifier positive supply voltage positive supply current Environment operating temperature outline dimensions antenna pattern 3 dB po veertical side lobe suppression horizontal po vertical 1 4 Antenna pattern output power dB rae M ETIT 120 90 60 30 0 30 60 90 150 180 Innovation in radar sensing Making happen what others only dream of CONFIDENTIAL AND PROPRIETARY The information contained in this document is the sole and exclusive property of InnoSenT GmbH and must not be disclosed by the recipient to third parties page 3 of 8 DATA SHEET amp USER MANUAL IPT 914 IPR 915 16 06 2009 Version 0 3 mowiono ile SENT Making happen what others only dream of Innovative Sensor Technol
5. age 5 page The information contained in this document is the sole and exclusive property of InnoSenT GmbH and must not be disclosed by the recipient to third parties DATA SHEET amp USER MANUAL IPT 914 IPR 915 16 06 2009 Version 0 3 Innovation in radar sensing linn osen Making happen what others only dream of Innovative Sensor Technology 1 DATASHEET Module Number IPT 914 IPR 915 1 1 Basic Features e radar based barrier consisting of one Tx and one Rx Module e operating frequency 24 000 24 250GHz 24GHz ISM Band e covered range up to 180m Transmitter Receiver S up to 180m integrated RF pre amplifier within the Rx Module integrated PLL circuit for high frequency stability and low phase noise for the Tx and Rx Part Tx and Rx frequencies are customer programmable 2 selectable output power levels ETSI FCC for the Tx Module the Tx signal can be ASK modulated up to 26kHz 1 2 Concept Drawing Tx Part IPT 914 Rx Part IPR 915 PE nr LEC PLL stabilized PLL stabilized VCO LNA Mixer VCO modulation input LF amplifier Innovation in radar sensing Making happen what others only dream of CONFIDENTIAL AND PROPRIETARY The information contained in this document is the sole and exclusive property of InnoSenT GmbH and must not be disclosed by the recipient to third parties page 2 of 8 DATA SHEET amp USER MANUAL IPT 914 IPR 915 16 06 2009 Version 0 3 moons il S
6. ogy 1 5 Mechanical Outlines ave 10 2 55 4 A i ie j M2 5 Pp CO ON CU i g D D LO CU M O o t i eae O ee es ee 16 88 B 418 _ all dimensions in Millimeter 1 6 Interface Connector 14FMN BMT A TF Pin Function Description SOSOS S Interface IPT 914 3 donotconnect J S low 20dBm high 24dBm open high Mee o oo PS SSCS 6 jno 7 _ donotconnet S 8 donotconnet S O 9 donotconnet S 10 donotconnect S D do not connect SS do not connect SS r Interface IPR 915 Vcc Power supply 5V lock detect low if PLL is unlocked 3 3V if PLL is locked do not connect 5 O do not connect SO do not connect OO do not connect do not connect IF outout IF output 5MHz do not connect do not connect OOOO Q S15 5 gt olalo J C e 8 Innovation in radar sensing Making happen what others only dream of CONFIDENTIAL AND PROPRIETARY The information contained in this document is the sole and exclusive property of InnoSenT GmbH and must not be disclosed by the recipient to third parties page 4 of 8 DATA SHEET amp USER MANUAL IPT 914 IPR 915 16 06 2009 Version 0 3 mosoni I SONTT Making happen what others only dream of Innovative Sensor Technology 2 USER MANUAL Module Number IPT 914 IPR 915 2 1 Adjustment of output power The K Band Barrier can be operated in two power seitings An AGC Au
7. sole and exclusive property of InnoSenT GmbH and must not be disclosed by the recipient to third parties page 5 of 8 DATA SHEET amp USER MANUAL IPT 914 IPR 915 16 06 2009 Version 0 3 momens ill no SENT Making happen what others only dream of Innovative Sensor Technology Please make sure that the USB USB socket cable has a max length of 1 meter ZIF socket Picture 1 programming kit e Please start IPRO Software Ipro IPT 914 IPR 915 1 0 New File o x File Connection Port COM C Connect Settings a Product Monitor Serial Number 5 Frequency E GHz kis write Picture 2 Programming user interface e Software o The Software will automatically detect the USB Port used while starting o In order to connect the PC with the programming kit please press the Connect button o Pressing the Read button delivers information concerning the actual settings as well as the serial number of the connected module o The desired frequency can be set via provided Pull Down Menus Ipro IPT 914 IPR 915 1 0 New File File Port COM Disconnect Settings a Product IPT 314 Monitor Serial Number 00000002 Frequency 241 594 GHz es f Write Picture 3 Selection of transmit frequency and IF amplification Due to the provided channel spacing of 5 MHz intervals you can select the frequencies provided by the Pull
8. tomatic Gain Control regulates the output power to 20dBm in LOW POWER mode and keeps it stable over temperature The HIGH POWER mode will suspend the AGC which leads to an output power of typically 24dBm The desired operating mode can be adjusted through PIN 4 LP of the sensor The following options are available e Low Power AGC controlled PIN active LOW e High Power PIN active HIGH The default adjustment is HIGH PIN open 2 2 Programming of the transmit frequency with the programming kit IPRO The IPRO programming kit can be used for in house programming of the transmit frequency The programming unit consists of the programming adapter programming software and the USB cable In order to program the sensor you will have to follow the following action steps e Please install the IPRO Software to your PC Basic requirements are Windows XP USB 2 0 Interface o Please insert provided CD in your CD Drive Please note that you need Administrator Permission in order to install Drivers amp Software o The installation Software starts automatically o Please first install Drivers before installing the IPRO Software e Connect the IPRO programming kit with the sensor via provided ZIF cable Please note that the ZIF cable is connected properly to the correct socket Innovation in radar sensing Making happen what others only dream of CONFIDENTIAL AND PROPRIETARY The information contained in this document is the
9. writing data to the sensor Sensor has to be proarammed aaain Please contact InnoSenT directly in case of different errors occurring while using the adapter You will find the contact details at the end of this user manual Certification and environment protection InnoSenT GmbH has established and applies a quality system for C EERE Development production and sales of radar sensors for commercial and EER DIN EN ISO 9001 2000 industrial sensors Zertifikat 01 100 010350 An audit was performed Report No 010350 Proof has been furnished that the requirements according to DIN EN ISO 9001 2000 are fulfilled This InnoSenT product is compliant to the restriction of hazardous substances RoHs European Union directive 2002 95 EG Contact Information InnoSenT GmbH Phone 49 0 9528 9518 0 E Mail info InnoSenT de Am Roedertor 30 Fax 49 0 9528 9518 99 Web www lnnoSenT de 97499 Donnersdorf Germany Innovation in radar sensing Making happen what others only dream of CONFIDENTIAL AND PROPRIETARY The information contained in this document is the sole and exclusive property of InnoSenT GmbH and must not be disclosed by the recipient to third parties page 8 of 8 DATA SHEET amp USER MANUAL IPT 914 IPR 915 16 06 2009 Version 0 3
Download Pdf Manuals
Related Search