UNDERCOVER LED KIT - Lightning X Products
Contents
1. UNDERCOVER LED KIT USER MANUAL CONTENTS LED LIGHTHEAD x 2pcs EXTENSION CABLE LED FLASHER amp CABLE GASKET x 2pcs SCREW x 4pcs INSTALLATION Corner Light Assembly Remove Corner Head Tail light from vehicle Select location to mount LED lighthead Drill 1 inch diameter hole Insert lighthead into hole and secure with supplied sheet metal screws RON NOTE Rotate lighthead to achieve optimum effect as vehicle reflectors may vary Mounting screw holes WARNING Make sure the LED lighthead does not interfere with the operation of vehicle lights 1 inch dia hole Gasket to lighthead LED Lighthead E FP Flash Patterns A Supplied sheet metal screw 0 Random Lol 1 Single split 2 Double split 3 Quad split 4 Quint split 5 Mega split 6 Ultra split To VDC fuse 5A 7 Single Quad split TOU assis Ground r se a g ee 8 Single H L split For Simultaneous or Alternating Flash WHITE 9 Single all Group1 Heads Wiring WHITE connected to RED will flash together 10 Double all Group2 Heads Wiring WHITE not connected to RED will flash together 11 Quad all Group1 Heads will alternate with Group2 Heads 12 Quint all For Synchronization amp Flash Patterns YELLOW 13 Mega all Connect YELLOW wires of all Kits together f2. it does not have to match the wire colors of the strobe extension cables
3. or synchronization All kits must be set at the same pattern 14 Ultra all Momentarily apply VDC to YELLOW wire BSE oe EC once for next pattern 16 Single H L all quickly three times for reset 17 Steady 2 CA 18 Steady 4 all NOTE This unit may not be factory set at FP 0 SPLIT Head1 alternate Head2 WARNING Do not connect lighthead directly to ALL Head1 amp 2 Simultaneous power It will cause damages and void warranty OZE060 WIRING illustration of wiring 2 kits together In this configuration Unit1 heads will alternate with Unit2 heads ON OFF 5A FUSE user supplied A1adV9 NOISNALXS A1adV9 NOISNALXS CHASSIS GROUND NOTE Illustration not to scale WIRING illustration of wiring to existing strobe cables In this configuration existing strobe extension cables are used to facilitate installation STROBE CONTROLLER POWER SUPPLY elele OJ 1 GND Fr Fr yeg p y MOIRA SUM 1 Disconnect strobe 2 Connect LED Kit extension cables from connectors to strobe strobe power supply extension cables F BS 3 Remove amp Disconnect Strobe bulbs from extension cables STROBE BULB EXTENSION CABLE already in vehicle Lau gt o Lo ooo Fac 4 Insert amp Connect LED Ligtheads to strobe extension cables NOTE The wire colors of the LED K
Download Pdf Manuals
Related Search