Home

Messages and Codes - ServiceNet - T

Contents

1. DSN dsn This message is issued by the Odette File Transfer Protocol Task in response to a Display DS command The message shows information about a file transfer if the file is Sent or Received the number of records or 1K blocks transmitted so far and the file name rvsMVS Messages and Codes 5 rvs Messages DF9432I DF9433P DF9434I DF94351I DF9435Z DF9436Z DF9437P DF9438I DF94401I DF9441I This message is issued by the Odette File Transfer Protocol Task in response to a Display Velocity DV command The message shows the average transmission speed for the time the transmission started up to now Z sid accm sessonid CURRENT COUNTERS RCNT HIE E E UCNT HIHTESIEHE This message is issued by the Odette File Transfer Protocol Task additionally to message DF94091 in case of EFNA to print the current values of record count and unitcount sender own This message is issued by the Odette File Transfer Protocol Task if the volume containing the file is not mounted This message is issued by the Odette File Transfer Protocol Task if the file is not found on the volume specified in the KDRECORD Shown is the virtual file name A sid PHYSICAL DSN VOLUME This message is issued by the Odette File Transfer Protocol Task if the file is not found on the volume specified in the KDRECORD Additional this message shows the physical datasetname of the file
2. RC xxxx SENSE xxxx This message is issued by the rvs APPC driver task routine The APPCCMD ALLOC was issued to start a conversation with a partner node but the request failed In the message is shown the VTAM return and sense codes for the failing request Refer to VTAM programming manual for further information SENSE xxxx This message is issued by the rvs APPC driver task routine An APPCCMD SEND with CONFIRM or FLUSH option was issued in order to flush the send buffer and get an acknowledgement from the partner but the request failed In the message is shown the VTAM return and sense codes for the failing request Refer to VTAM programming manual for further information APPCCMD DEALLOC FAILED FOR RC xxxx SENSE xxxx This message is issued by the rvs APPC driver task routine The APPCCMD DEALLOC was issued to stop a conversation with a partner node but the request failed In the message is shown the VTAM return and sense codes for the failing request Refer to VTAM programming manual for further information APPCCMD REJECT FAILED FOR RC xxxx SENSE xxxx This message is issued by the rvs APPC driver task routine The APPCCMD REJECT was issued to stop a conversation with a partner node but the request failed In the message is shown the VTAM return and sense codes for the failing request Refer to VTAM programming manual for further information APPCCMD RECEIVE FAILED FOR
3. DF30051 DF30061 DF3006I DF3006I Status report of a BTAM line as reply to the command DS Display Status sid remote station ID II line subchannel number dsname name of the data set which is just transmitted nnn number of blocks transmitted volume volume number and status status information The following status information may be displayed status meaning STARTING Transmission is just starting or restarting ACTIVE The transmission is active zz The transmission is active zz of the data set volume has already been transmitted CANCELLED The transmission is just being cancelled KEPT END CATLG b Transmission has terminated normally UNCATLG The executed disposition is being DELETED J indicated on the second position ABEND sss uuu the transmission has been aborted because of an error sss System Completion Code uuu User Completion Code rvs MONITOR ENDED The monitor ended normally after the command P rvs has been entered All RVSMVS LINES ARE INACTIVE Reply to command DS if no line is active acme SUBTASK ACTIVE BUT NOT READY Reply to command DS TCP or DS LU62 acme denotes the access method TCP IP or LU6 2 The message indicates that the control task for this component is active but not able to process commands from the rvs maintask For TCP IP this situation may occur if the IP address space is terminated ab
4. MAX NUMBER OF SDS TASK EXCEDED ATTACH FAILED DF052N ATTACHED SDS STOP SDS CANCEL WAITING SDS TASK ACTIVE TASK ACTIVE x NO ACTIVE SDS TASKS x RECORD DONE IGNORED x RECORD IN HOLD STATE IGNORED TASK WITH KD RECORD ACTIVE ckck SDS BUILD kkkk SEND REQUEST IN HOLD STATE PRIVATE KEY ERROR HOLD ERROR CHANGE KDRECORD SEND REQUEST IN HOLD STATE PUBLIC KEY ERROR HOLD ERROR CHANGE KDRECORD All message are protocol messages only DF5M25P NO STATION TABLE FOR SID The Send Dispatcher detects an error The record can not processed DF5M27I SDS TASK COULD NOT BE STARTED NOT ENOUGH MEMORY This message is issued by Send Dispatcher task when activation of further subtask is rejected because of storage shortage DF5M99P X ORT ACME 12345678 rvsMVS Messages and Codes 5 rvs Messages Internal trace message of Send Dispatcher DF5NOOI D SDS DRIVER TASK 2 2 This message will be issued by the D command For more explanation refer to message DF52011 DF5N341 D VOLUME IS NOT MOUNTED DF5N35I D FILE NOT FOUND ON SPECIFIED VOLUME This message is issued by the SDS Task if the file is not found on the volume specified in the KDRECORD Shown is the virtual file name DF5N35Z D PHY
5. RC xxxx SENSE xxxx This message is issued by the rvs APPC driver task routine The APPCCMD RECEIVE was issued to read data on a conversation but the request failed In the message is shown the VTAM return and sense codes for the failing request Refer to VTAM programming manual for further information APPCCMD SEND FAILED FOR RC xxxx SENSE xxxx rvsMVS Messages and Codes 5 rvs Messages DF8714W DF8715W DF8799P This message is issued by the rvs APPC driver task routine The APPCCMD SEND was issued to send data on a conversation but the request failed In the message is shown the VTAM return and sense codes for the failing request Refer to VTAM programming manual for further information rvs APPC DRIVER SEND DATA FLUSHED DUE TO LOCKED SERVER QUEUE This message is issued by the rvs APPC driver task routine when data to be sent to the file protocol server was rejected due to a locked server queue ie the file server was not ready to accept the request F sid APPC DRIVER SHUTDOWN because of secondary CANCEL starting This message is issued by the rvs APPC driver task routine when a shutdown request second CANCEL command reached NOTE All activ sessions will be enforced terminated independent of the state of remote station 972727222 This message is issued by the rvs APPC driver task trace routine Shown is the name of driver task subroutine which gets control For internal use only
6. A ORT PHYSICAL DSN VOLUME Additional message to DF9435Z Z ORT ACCM SESSONID VALUES CO C1 7 RA 7 7 22727227227 This message is issued by the Odette File Transfer Protocol Task if SPECIAL LOGIG is used and an error occurred in receiving state The checksum values CO and C1 register 4 old buffer 5 char counter 6 return code and 7 new buffer are shown Z Z ORT ACCM SESSID SYSTEM ABEND 001 DURING JOB SUBMIT DETECTED RECOVERY IN PROGRESS This message is issued by the Odette File Transfer Protocol Task if an ABEND 001 occurred during job subbmit Z ORT ACCM SESSONID dsn NOT CATALOGED TRANSMISSION CANCELLED This message is issued by the Odette File Transfer Protocol Task if the dataset to send is not found Z ORT ACCM SESSONID DV COMMAND REJECTED NO ACTIVE TRANSMISSION rvsMVS Messages and Codes 5 rvs Messages DF9442P DF9443P DF9444P DF9445E DF9446E DF9447E DF9448P DF9449P This message is issued if a DV command is given but send or receive is not active yet Z ORT ACCM SESSONID 7ERP RECVD DSN dsn QDATE qdate QTIME qtime This message is issued to inform about receiving an EERP NERP In case of errors additional messages DF94161 and DF94171 will be given Queuing date and time ist stated S ORT ACCM SESSID FILESIZE UNKNOWN DETERMINATION STARTED This message is issued during start of a transmission
7. FOR LOCAL SOCKET This message is issued when Get Host by Name succeeded for own name XX GETHOST BY NAME RETURNED FOR PARTNER This message is issued when Get Host by Name succeeded for partner name XX SNMPX TRAP MNG TASK STOPED DF031X TASK This message is issued when the Task was stopped rvsMVS Messages and Codes 5 rvs Messages DFX144P XX SNMPX TRAP MNG TASK CANCELED DF031X TASK This message is issued when the Task was cancelled DFX145P XX SNMPX TRAP MNG TASK BREAKING DF031X TASK This message is issued when the Task was stopped with break rvsMVS Messages and Codes 5 rvs Messages Messages of the SNMP Trap Send Task DF031Y DFY101P DFY102P DFY103E DFY104E DFY105E DFY106E DFY107E DFY108E DFY109E DFY110E DFY112E DFY113P DFY114P DFY144P XX SNMPY TRAP SEND TASK STARTED VERS 2 2 2 2 2 2 2 2 2 This message is issued by the SNMP task when Task initialization is complete The level of the program is shown XX SNMPY TRAP SEND TASK ENDED This message is issued when SNMP Task ended XX GETHOSTID FAILED ERROR This message is issued when gethostid fails XX BIND SOCKET FAILED ERRNO ADDRESS PORT This message is issued when bind socket fails XX GET SOCKET FAILED ERROR ERRNO This message is issued when bind socket fails XX INITAPI FAILED
8. Couldn t obtain enough memory to create a file read buffer Ensure that the whole address space and enough memory is available You may wait until another process has finished and freed its memory Couldn t obtain enough memory to create a file read buffer Ensure that the whole address space and enough memory is available You may wait until another process has finished and freed its memory Couldn t read data from the input dataset Read the ERRNO for more information Couldn t close the input dataset Read the ERRNO for more information Couldn t obtain enough memory to create a data buffer Ensure that the whole address space and enough memory is available You may wait until another process has finished and freed its memory Internal error Internal error The name of a required dataset is missing Please check your configuration and ensure that all parameter are set rvsMVS Messages and Codes 5 rvs Messages 4161015 4161016 4161017 4171001 4171002 4171003 4171004 4171005 4171006 4171007 4171008 4181001 4181002 4181003 4181004 4181005 4181006 4181007 4181008 4181009 4181010 4181011 KERNIE_UTIL_ COULD_NOT_OPEN_ FILE IN WRITE U FILE KERNIE_UTIL_ ERROR DURING WRITE TO FILE IN WRITE U FILE KERNIE_UTIL_ ERROR DURING CLOSE FILE IN WRITE U FILE KERNIE CERTST INVALID CERTSTORE POINTER KERNIE_CERTST_ CREATE_UNKNOWN_ CERTSTORE_TYPE KE
9. active send CS completed send partner station vdsn queueing date queueing time Example DFD049W DELAYED SEND TRANSM IN STATE EWR CS BK2 FIXOBKR A T100 TEXT 125 14064 1553360 EWR rvsMVS Messages and Codes 5 rvs Messages Messages of the SNMP Receive Task DF031E DFE101P DFE102P DFE103E DFE104E DFE105E DFE106E DFE107E DFE109E DFE110E DFE112E DFE113P DFE143P DFE144P DFE145P XX SNMPE RECEIVE TASK STARTED VERS 2 2 2 2 2 2 2 2 This message is issued by the SNMP task when Task initialization is complete The level of the program is shown XX SNMPE RECEIVE TASK ENDED This message is issued when SNMP Task ended XX GETHOSTID FAILED ERROR This message is issued when gethostid fails XX BIND SOCKET FAILED ERRNO ADDRESS PORT This message is issued when bind socket fails XX GET SOCKET FAILED ERROR ERRNO This message is issued when bind socket fails XX INITAPI FAILED ERRNO This message is issued when initapi fails The snmp task is terminated after this event Possibly the TCP IP configuration of SNMP is not correct XX API MODULE COULD NOT BE LOADED This message is issued when api module could not be loaded XX SHUTDOWN CONNECTION FAILED ERROR ERRNO This message is issued when shutdown fails XX CLOS
10. 4221014 4221015 4221016 4221017 4221018 4221019 4221020 4221021 4221022 4221023 4221024 4221025 4221026 4221027 4221028 4221029 4221030 KERNIE_P15KEYST_ ZERO_CRYPT_KEYSET IN_GET_KEYSET KERNIE_P15KEYST_ ZERO KEYSTORE POINTER IN GET PRIVATE KEY KERNIE_P15KEYST_ ZERO_KEYPAIR_POINTER_ IN_GET_PRIVATE_KEY KERNIE_P15KEYST_ COULD_NOT_GET_PRIVATE_ KEY_IN_GET_KEYPAIR KERNIE_P15KEYST_ ZERO KEYSTORE POINTER IN GET CERTIFICATE KERNIE P15KEYST ZERO CERTIFICATE POINTER IN GET CERTIFICATE KERNIE P15KEYST COULD NOT GET CERT IN GET CERTIFICATE KERNIE P15KEYST COULD CERT NOTFOUND IN GET CERTIFICATE KERNIE P15KEYST ZERO KEYSTORE POINTER IN SET PRIVATE KEY KERNIE P15KEYST COULD NOT SET PRIVATE KEY KERNIE P15KEYST COULD NOT SET PRIVATE KEY DUPLICATE KERNIE P15KEYST ZERO KEYSTORE POINTER IN GET KEY BY SER KERNIE P15KEYST PARAMETER SERIALNUMBER NOT SET KERNIE P15KEYST ZERO KEYPAIR POINTER IN GET KEY BY SER KERNIE P15KEYST COULD NOT GET PRIVATE KEY IN GET KEY BY SER KERNIE P15KEYST COULD NOT GET CERT IN GET KEY BY SER KERNIE P15KEYST ZERO KEYSTORE POINTER IN GET KEYLIST KERNIE P15KEYST ZERO KEYPAIR POINTER IN GET KEYLIST KERNIE P15KEYST ZERO KEYPAIR POINTER IN GEN KEYPAIR KERNIE P15KEYST COULD NOT CREATE KEYPAIR CONTEXT KERNIE_P15KEYST_ COULD_NOT_SET_KEYLABEL_ IN_GEN_KEYPAIR KERNIE_
11. DF3040I x25group CTCP list Message to display all defined X25 groups if the command X25GROUP has been entered For description of these command see Operations Manual DF3040I NO X25GROUP DEFINED This message occurs if the command X25GROUP has been entered but no X25GROUP has been defined rvsMVS Messages and Codes 5 rvs Messages DF30401I MSG function name PROCESSED RC rc This message occurs if the command MSG function name has been entered function denotes one of the following functions CNSLSUP suppression of console messages CNSLDSPL display of console messages RMOPSUP suppression of messages for remote operating session RMOPDSPL display of messages for remote operating session name denotes the name of a message subset which must be defined within the CNTLMSG member of the rvs tables data set For a detailed description of this member see rvsMVS Installations Manual rc denotes the returncode of the processed command The following return codes may occur 00 command has been processed successfully 04 specified message subset name not defined in CNTLMSG member 08 CNTLMSG member not available allocated DF3040I MSG REFRESH PROCESSED This message occurs if the command MSG REFRESH has been entered the command has been processed successfully DF3040I MSG DISPLAY CS namel RS name2 CD name3 RD name4 DF30401I MSG SETDEF CS namel RS name2 CD name3 RD name4 This message occurs if one of th
12. DFD049W XX SNMPD TRAP MNG TASK STARTED VERS 222222222222222222222272227222 This message is issued by the SNMP task when Task initialization is complete The level of the program is shown XX SNMPD TRAP MNG TASK ENDED This message is issued when SNMP Task ended XX SNMPD TRAP MNG TASK STARTED DF031Y TASK This message is issued when the Subtask was started XX SNMPD TRAP MNG TASK STOPED DF031Y TASK This message is issued when the Subtask is stopped XX SNMPD TRAP MNG TASK CANCELED DF031Y TASK This message is issued when the Subtask is canceled XX SNMPD TRAP MNG TASK BREAKING DF031Y TASK This message is issued when the Subtask is stopped with break XX SNMPD TRAP MNG TASK STOPED DF031Y TASK This message is issued when the Subtask has detached XX DELAYED SEND TRANSMISSIONS MISSING EERPS FOR HOURS This message is issued once in an hour when parameter SNMPDLAY in CNTL is set and delayed send transmissions were found first counter relates to transmissions not yet started second counter relates to missing end to end responses XX DELAYED SEND TRANSM IN STATE 2 22 2 2 2 2 2 2 2 2 2 2 2 2 22 222222222222222229 PIPPI This message is issued for each delayed send transmission when LIST option of parameter SNMPDLAY is set shown variables state of transmission as shown in panel EWR record type of KD record AS
13. Message k is displayed if for specific request no entry exist in external KD dataset S sid acme nm DISPATCHER HAS BEEN POSTED POSTCODE XX This message appears only within the rvs protocol It indicates the communication between different subtasks send session mn for station sid and access method acme to the dispatcher task within the rvs monitor Postcode of Dispatcher LU 0 00 request for DEQ processing 04 request for DEQ processing and selection of next file 08 same as postcode 04 Postcode of Dispatcher LU6 2 X 25 00 request for DEQ processing 04 end request from ODETTE reply POST 0 next dataset ready to send POST 8 nothing to send 08 selection of next file to send 12 ODETTE task abend request DEQ processing S sid acme LUO RECEIVE SESSION POSTED POST IGNORED This message appears only within the rvs protocol It indicates problems in the communication between different subtasks receive session for station sid and access method acme to the Dispatcher task within the rvs monitor S sid acme POST IGNORED POSTCODE xx This message appears only within the rvs protocol It indicates problems in the communication between different subtasks send session for station sid and access method acme to the Dispatcher task within the rvs monitor S sid acme nm NO SESSION DEFINED FOR THIS STATION This message appears only within the rvs protocol
14. Messages of the SNMP Receive Task DF031X DFX101P DFX102P DFX103E DFX104E DFX105E DFX106E DFX107E DFX108E DFX109E DFX110E DFX112E DFX113P DFX114P DFX143P XX SNMPX RECEIVE TASK STARTED VERS 222222222 222 222 2222222222222222 This message is issued by the SNMP task when Task initialization is complete The level of the program is shown XX SNMPX RECEIVE TASK ENDED This message is issued when SNMP Task ended XX GETHOSTID FAILED ERROR This message is issued when gethostid fails XX BIND SOCKET FAILED ERRNO ADDRESS PORT This message is issued when bind socket fails XX GET SOCKET FAILED ERROR ERRNO This message is issued when bind socket fails XX INITAPI FAILED ERRNO This message is issued when initapi fails The snmp task is terminated after this event Possibly the TCP IP configuration of SNMP is not correct XX API MODULE COULD NOT BE LOADED This message is issued when api module could not be loaded XX RECEIVE MESSAGE FAILED ERRNO This message is issued when receive fails XX SHUTDOWN CONNECTION FAILED ERROR ERRNO This message is issued when shutdown fails XX CLOSE SOCKET FAILED ERROR ERRNO This message is issued when close fails This message is issued when Get Host by Name fails XX GETHOST BY NAME RETURNED
15. The message indicates a translation table is used for receive request Comp Secr D message Status Message from the Service Provider Task receive request D message D 22 9727272222 27277777 22229777 7 fff This message is issued if an internal modul trace will be processed Protocol message only RECEIV DISP SUBTASK STARTED VERSION 1234567890123456789012345678901234 RECEIV DISP SUBTASK ENDED VERSION 1234567890123456789012345678901234 rvsMVS Messages and Codes 5 rvs Messages Start End message of Receive Dispatcher Task DF5X02P LIST OF RR ENTRIES CREATED REFRESHED This message is displayed after the list of resident receive entries in the monitors address space has been created during monitor start or refreshed DF5X03P addrl1 addr2 flg RRsid dsn This message is displayed as a response to command DS RRLIST For every resident receive entry entry in the monitor internal list one message is displayed The message shows details about the monitor internal list of resident receive entries addri address of the next entry in the list addr2 address of the next section in the list flg flag indicating whether this entry contains valid data 08 or not 00 sid station id of the remote station dsn virtual dataset name DF5X03P END OF LIST OF RR ENTRIES This message marks the end of the display in response to command DS RRLIST DF5X09P LIST O
16. This message occures if the rvs log data set contains less than 596 of free space The message indicates that program DF072A00 saving of control data set and log data set has to be started within the next time Without start of program DF072A00 rvsMVS does not run any more DF5413E ROLLBACK FAILED IN FUNC WITH RC FDBK This message is generated if a ROLLBACK operation on the control dataset failed A ROLLBACK failure requires a consistency ckeck of the control dataset by the rvsMVS system administrator 2222222 VSAM function that failed during ROLLBACK MODCB19 GET SHOWCB1 ERASE SHOWCB2 RC Return code of VSAM call FDBK Feedback code of VSAM call DF5414E RT2 ST2 EC 2 2 2 2 2 rvsMVS Messages and Codes 5 rvs Messages This message is generated if an error occurred during change of record key RT Ready Time ST gt Start Time EC gt KDRECORD Key DF5415E ROLLBACK REQUIRED FOR ID This message occures if a rollback is required DF5416E ERASE OF OLD RECORD FAILED THE RECORD SEEMS TO BE DESTROYED This message is generated if an error occurred during change of record key DF5417E FUNCTION FAILED WITH RC FDBK DF5418P FUNCTION WAS RETRIED TIMES This message is generated if a temporary access failure to KD did persist RC and FDBK are signaled in the next message DF5U01P ID nn RC 00 REC key ORT sid dsn
17. 0 2 7 77 7 7 7 7 2 2 2 7 77 777 7 7 7 7 77 77 7 7 7 Your rvsMVS license will expire soon e YOUR RVSMVS LICENSE EXPIRES TOMORROW YOUR RVSMVS LICENSE EXPIRES IN d DAYS a EEE EEE DE EE OEE DE EE OE OE OE OE OE Your rvsMVS is going down soon because of license problems e LICENSE PROBLEM RVSMVS IS GOING DOWN IN d MINUTES LICENSE PROBLEM RVSMVS IS GOING DOWN IN d SECONDS rvsMVS must be restarted with a valid license dataset possible cause change of license data set while rvsMVS was running 9 7 7 7 0 2 7 77 77 7 7 7 2 2 7 77 777 7 7 7 7 77 77 7 7 7 Your rvsMVS prepares shutown operations because of license problems e LICENSE PROBLEM RVSMVS PREPARES SHUTDOWN OPERATION 7 7 7 0 02 2 27 77 7 7 7 7 2 2 2 7 77 777 7 7 7 77 77 7 7 7 Your rvsMVS license has expired e YOUR RVSMVS LICENSE HAS EXPIRED YOUR LICENSE HAS EXPIRED 7 7 0 02 2 7 777 7 7 2 7 77 777 7 7 7 7 77 77 7 7 7 Your rvsMVS license is invalid because the license control block is damaged e LICENSE CONTROL BLOCK IS DAMAGED 7 7 0 0 2 27 77 77 7 7 7 2 2 77 777 7 7 7 7 77 77 7 7 7 A revoked keyid was found You are using a revoked license in your system e REVOKED KEY s WAS FOUND BY KEYID CHECK It is not possible to use a license dataset while a revoked license key is still in use Possible cause parallel usage of old and renewed license Start all monitors
18. DF5616P Station sid itself identified correctly over line IIl Data transmission begins after exchange of some additional information f sid EFFECTIVE SPEED nnnn BPS After transmission of the trailer record the transmission speed is determined for the current data set The larger the data set the more precise is the statement concerning speed With very small data sets or in the event of a restart the speed determined is severely reduced by intensive computer activations ALLOCATION OPEN CONTROL CLOSE f sid I O SUBTSDK ABEND S sss U uuu A subtask responsible for data input or output terminates abnormally with system completion code sss or user completion code uuu f sid lll CONNECTION FAILED The line connection was interrupted or failed When determing the cause attention should be payed to previous system messages or messages of the rvs monitor f sid lll OVERFLOW SWLIST TABLE TO MANY STATIONS DEFINED FOR THIS LINE The rvs stations table contains too many station entries or alias names for stations that use the same limit 200 f sid lll LINE CANNOT BE STARTED Line Ill cannot be activated the reason may be error in allocation line is incorrectly generated line is OFFLINE A system programmer or IBM technician must be consulted f sid dsname REMOTE ABEND sss uuu An error has occurred at the remonte station sss system completion code uuu user completion code rvs does not att
19. on volume volume takes place In case of a restart the restart point block nnn or record nnn is displayed The message remains displayed until the data set is positioned at restart point DF3514E R sid INVALID BUFFER TYPE t RECEIVED BUFFER IGNORED A line block with invalid type t has been received This block is to be ignored and the transmission will be continued DF3515E R sid EXPECTED BLOCKNUMBER IS nnnn RECEIVED BLOCKNUMBER IS mmmm An error has been detected in the block sequence check Instead of the expected block nnnn block mmmm was received A restart is required DF3516P al a2 b1 b2 c1 c2 rvsMVS Messages and Codes 5 rvs Messages For purposes of checking the following data are displayed after reception of a data set al number of data blocks received a2 number of data blocks transmitted b1 number of line blocks received b2 number of line blocks transmitted c1 number of characters received c2 number of characters transmitted DF3517E R sid nnn REQ SPACE nnnnn BLOCKS NOT AVAILABLE For additional information see message DF3502E The output data set could not be allocated because the space required nnnnn blocks is not available This message may appear when a particular receive volume has been specified in a resident receive entry Action e make enough space available on the volume concerned e specify another volume e make sure that a space allocation on work volumes
20. 2 7 77 777 7 7 7 7 77 77 7 7 7 This message shows the error code number e ERROR CODE d rvsMVS Messages and Codes DFX807E DFX808E DFX809E DFX810E DFX811E DFX812E DFX813W DFX814W DFX815W DFX816E DFX817E DFX818E 5 rvs Messages 7 7 0 0 2 7 777 7 7 2 2 2 7 77 777 7 7 7 77 77 7 7 This message shows the error code description self explaining Example e NO SECTION FOUND extended license expected but old layout without sections found Possible cause license dataset modified from extended layout to old layout while rvsMVS was running Restart rvsMVS with valid license dataset 7 7 7 0 2 2 27 777 7 7 2 2 7 77 777 7 7 7 77 77 7 7 7 This message shows the errno code number e ERRNO d 7 72 7 7 0 2 7 77 77 7 7 2 2 7 77 777 7 7 7 7 77 77 7 7 7 This message shows the errno code description self explaining 7 7 7 0 0 2 27 77 7 7 7 7 2 2 77 777 7 7 7 77 77 7 7 7 This message shows the crypt error code number e CRYPT ERROR CODE d 7 7 7 0 0 2 27 77 77 7 7 7 2 2 7 77 777 7 7 7 77 77 7 7 7 This message shows the crypt error code description self explaining 7 7 0 2 7 77 7 7 7 7 2 2 7 77 777 7 7 7 7 77 77 7 7 7 Your rvsMVS license is invalid e YOUR RVSMVS LICENSE IS INVALID 96d 96d YOUR RVSMVS LICENSE KEY IS INVALID 96d 0 9 7 7 7 7
21. 4201003 4201004 4201005 4201006 4201007 4201008 4201009 4201010 4201011 4201012 4201013 4201014 KERNIE_VSAM_ MALLOC_FAILED_FOR_ CLIST_ITEM KERNIE_VSAM_ CERT_BY_KEY_NOT_FOUND KERNIE_VSAM_ CERT_BY_KEY_RECORD_ READ_ERROR KERNIE_VSAM_ CERT_BY_KEY_CERT_ IMPORT_ERROR KERNIE_VSAM_ SET CERT ALREADY EXIST KERNIE_VSAM_ SET_CERT_WRITE_ERROR KERNIE_VSAM_ UPDATE_CERT_NOT_FOUND KERNIE_VSAM_ UPDATE_CERT_READ_ ERROR KERNIE_VSAM_ UPDATE_CERT_ UPDATE_ERROR KERNIE_VSAM_ DELETE_CERT_NOT_FOUND KERNIE_VSAM_ DELETE_CERT_ FDELREC_ERROR KERNIE_VSAM_ CLOSE_CERTSTORE_ERROR KERNIE_VSAM_ OPEN_CERTSTORE_ERROR KERNIE_DF053C_ OPEN_CERT_FILE_FAILED KERNIE_DF053C_ CERT_FILE_FLDATA_FAILED KERNIE_DF053C_ INVALID_CERT_ RECBLK_LENGTH KERNIE DF053C CLOSE CERT FILE FAILED KERNIE DF053C RECORD READ FAILURE KERNIE DF053C CERT TO BIG KERNIE DF053C IMPORT CRYPTINIT FAILED KERNIE DF053C IMPORT CRYPTIMPORT FAILED KERNIE DF053C IMPORT CRYPTEXPORT FAILED KERNIE DF053C IMPORT CRYPTEND FAILED KERNIE DF053C LIST CRYPTINIT FAILED KERNIE DF053C LIST NO CERT FOUND KERNIE DF053C LIST CRYPTEND FAILED KERNIE DF053C OPEN SYSIN FAILED Couldn t obtain enough memory to create certificate list item Ensure that the whole address space and enough memory is available You may wait until another process has finished and freed its memory Couldn t find th
22. IGNORED FOR SID XXX The user separation parameter USP YES found in station entry for SID xxx but the user separation is not included in current licence key The parameter is ignored WARNING ONLINE SECURITY NOT INCLUDED IN CURRENT LICENCE KEY IGNORED FOR SID XXX rvsMVS Messages and Codes 5 rvs Messages The online security parameter SGECURITY ONL found in station entry for SID xxx but the online security is not included in current licence key The parameter is ignored DF2261W WARNING ONLINE SECURITY ONLY SUPPORTED FOR ACESS METHODS X25 LU62 TCP IGNORED FOR SID XXX The online security parameter SECURITY ZONL found in station entry for SID xxx but the online security is available only for access method X25 LU62 and TCPIP The parameter is ignored Messages of program DF022C Online refresh of the internal station table DF22COI ONLINE STATION REFRESH STARTED LEVEL nn nn nn nn nn First message of program DF022C Processing of online refresh of the internal Station Table starts The program level is stated DF22C1I NUMBER OF ADDED MAIN ENTRIES nnnn Number of Station Table main entries that have been added to the internal Station Table DF22C2I NUMBER OF ADDED SUB ENTRIES nnnn Number of Station Table sub entries that have been added to the internal Station Table DF22C3I NUMBER OF REPLACED ENTRIES nnnn Number of Station Table entries that have been replaced by a Station Table entry of same station
23. It indicates internal problems within the rvs monitor for send session nm to station sid and access method acme Report this message to the system programmer ACT ENQ SID sid DSN dsname This message is displayed as response to command DD ENQ It displays the currently sent files to any remote station The ID of the remote station and the virtual file name for the transmission are displayed NUMBER OF ACTIVE ENQ RESOURCES nnn mmm SNA ODETTE rvsMVS Messages and Codes 5 rvs Messages DF5220P DF5221P DF5233P DF5234P DF5235P DF5236P This message is displayed as response to command DD ENQ It displays the summary of the currently sent files nnn files are sent on SNA sessions mmm files are sent on ODETTE sessions X 25 LU6 TCP FTP S sid acme nm CALL OF EXIT DFUX001 INITIATED COMPLETE This message appears when the dispatcher selects a file for transmission Execution of exit DFUX001 is displayed in this message S ORT ACME 12345678 SERIALIZATION TRANSMISSION IN PROGRESS This message appears when the dispatcher selects a file for transmission S sid acme nm START SELECTION OF SEND REQUEST This message appears only within the rvs protocol for internal use only Dispatcher trace command T DISP It indicates that selection of a send request for send session nm to station sid and access method acme has started SUCCESSFUL END SELECTION OF SEND REQU
24. KDDSN dsn name KDREADYD nnnnnnn KDREADYT nnnnnnn KDSTARTD nnnnnnn KDSTARTT nnnnnnn KDREC kdrecord FF 0X D sid sesid D sid sesid D sid sesid D sid sesid D sid sesid KEY KDRECTYP KDREMOTE KDNEXT KDSTATUS nn KEY KDDSN dsn name KDREADYD nnnnnnn KDREADYT nnnnnnn KEY KDSTARTD nnnnnnn KDSTARTT nnnnnnn KEY KDREC kdrecord ox oo B K The FTP Server task issues these messages Show contents of KD file Record For internal use only D sid sesid DSN dsn The FTP Server Task during verification MVS SMS parameters issues this message Shown is the real FTP file name D sid sesid DSORG dsorg STCL stcl MGCL mgcl DACL dacl The FTP Server Task during verification MVS SMS parameters issues this message Show the SMS parameters of real FTP file name D sid sesid NON SMS MANAGED DATAFILE The FTP Server Task during verification MVS SMS parameters issues this message Real FTP file is not SMS managed D sid sesid SMS DYNALLOC ERROR RC nnnnnnn ERRCD nnnnnnnn rvsMVS Messages and Codes 5 rvs Messages The FTP Server Task during verification MVS SMS parameters issues this message Dynamic allocation during checking SMS parameters real FTP file ended with error DF85BEP D sid sesid MOVE FILE sms parm ALLOCOLD old KDRECNEW new The FTP Server Task issues this message during verification rvsMVS SMS parameters SMS parameter of real FTP file and rvsMVS SMS parameters are diff
25. KERNIE IO UNKNOWN OUTPUT RECFM KERNIE IO ILLEGAL WRITE TEXTRECORDLENGTH KERNIE IO RECORD WRITE FAILURE FLUSH KERNIE CERTMGMT ZERO ARRAY POINTER IN GET CERT ARRAY KERNIE CERTMGMT COULD NOT GET CERT LENGTH IN GET CERT ARRAY Description The processing was interupted by operator command The record length of allocated output dataset is invalid Please verify the allocation parameter The record length must be greater than 0 The record length of allocated input dataset is invalid Please verify the dataset parameter The record length must be greater than 0 The input dataset couldn t be opened Read the ERRNO for more information The output dataset couldn t be opened Read the ERRNO for more information The input dataset couldn t be closed Read the ERRNO for more information The output dataset couldn t be closed Read the ERRNO for more information Couldn t write the complete record to the output dataset Read the ERRNO for more information Couldn t read a record from the input dataset Read the ERRNO for more information The length of the last record is invalid for the chosen dataset The length of the read record exceeds the maximum record length Couldn t obtain memory for dataset allocation Couldn t initialize dataset allocation Couldn t allocate output dataset Couldn t free memory used for dataset allocation Couldn t obtain allocation attributes from input
26. LAST EVENTS OF THIS BSC LINE SUBTASK DF30471 U 111 T time O ofst SID sid EV event Display of internal trace data for BSC line Ill These messages are displayed if the command U Ill is entered Internal tracing is automatically done for switched BSC lines after activation of the line time denotes the time when the trace entry was written absolute value with format HHMMSSTH or time difference to the previous trace entry in units of 1 100 seconds ofst denotes the offset within the module line control program where the trace entry is written trace point sid denotes the ID of the remote station if available to which the line IIl was connected event denotes the type of event which was recorded The following types may occur UNSPECIFIED no special event significant trace data are only time and offset within the program BTAM IO IO operation of the line the assigned BTAM macro is also rvsMVS Messages and Codes 5 rvs Messages DF3047I DF3047I DF3047I DF3047I DF3047I DF3047I DF3047I DF3047I DF3047I DF3047I DF3047I DF3048W DF30491I DF3050I STOP REQ CANCEL REQ LCP2 STARTED LCP2 BTAM RECOVERY ENDED EXT TRACE displayed a stop request has been detected operator has entered a stop command a cancel request has been detected operator has entered a cancel command line control program 2 DF057B00 has started line control program 2 DF057B00 has ended th
27. QT qtime This message is issued in addition to Start File Negative Answer SFNA messages stating the name of the datset that has been denied Queuing date and time ist also stated Z ORT ACCM SESSONID NO INVALID CODE TRANSLATION TABLE USED This message is displayed when code translation is requested but no or an invalid code translation table is used The name of the code translation table is shown S ORT ACCM SESSID WAITING FOR SYSTEM READY MESSAGE SSRM FROM STATION This message is displayed after connection request when the partner sends no answer S ORT ACCM SESSID RECEIVED ERP NOT STORED LENGTH 2222 HEX INVALID EERP NERP is too long S ORT ACCM SESSID UPDATE OF SEND REQUEST FAILED RC 22 HEX This message is displayed when an update of send request failed The messages DF9446 TRANSMISSION CANCELLED DF9430E and DF94A5P follow this message to describe the affected send entry This message could inicate a damaged rvs control dataset In this case it is recommended to check the control dataset IDCAMS VERIFY INDEXTEST DATATEST and to start a recovery if necessary S ORT ACCM SESSID RESOURCE NOT AVAILABLE TARGET This message is issued when the targed dataset name is in use by an other receiving task or decription decompression task receiving of the file will be rejected S ORT ACCM SESSID DATASET WITH SAME QUEUING DATE TIME ALREADY SENT rvsMVS Messages and Codes 5 rvs Messages DF946
28. RD readydate RT readytime SD startdate ST starttime This message is generated if the access to the key data set ended with certain return codes The message may appear if errors occur during access to the key data set DF5U031 SAVING OF rvs KEYDATA AND rvs KEYLOG DATA SET REQUIRED This message appears only in conjunction with message DF5K02W DF5UO6I AUTOMATIC CLOSE FOR KEY DATA SET EXECUTED BECAUSE OF VSAM FEEDBACK CODE 14 HEX An update of the rvs key dataset could not be executed because of VSAM feedback code 14 The code means a control intervall which is connected to the update processing is in exclusive control by another task This error situation is automaticly cleaned by an CLOSE OPEN of the control data set rvs repeats the faulty update DF5U08E USER ABEND 0640 REASON XX DEC OCCURED An error record occurred during access to the rvs key record A MODCB GENCB or SHOWCB macro could not be executed DF5U09E USER ABEND 0650 REASON XX DEC OCCURED An error record occurred during access to the rvs key record A record was found in the key dataset that could not be decompressed Please use program DF 144A to find and delete the incorrect record s Message DF5U10E is for possible error detection only They are not in effect for users purpose DF5U10E INVALID RECORD XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX rvsMVS Messages and Codes 5 rvs Messages DF5501E f lll lll OVERFLOW SWLIST TABLE TOO MANY STATIONS DEFINED
29. The message occurs if the command A sid for a X 25 station has been entered and SCT Session Control Table not free entry exist Check the parameter MAXSVC in CNTL table SPECIFIED STATION sid MAX SESSION ACTIVE The message occurs if the command A sid for a X 25 station has been entered and the maximum sessions for this station sid exist check the parameter X25SESS in station table for sid nn ACTIVATION FOR STATION sid REJECTED NO RESSOURCES AVAILABLE The message occurs if the command A sid for a X 25 station has been entered and all SVCs of the CTCPs which are defined for the specified station are in use nn ACTIVATION FOR STATION sid REJECTED SPECIFIED CTCP NOT DEFINED FOR THIS STATION The message occurs if the command A sid Cnn for a X 25 station has been entered but the specified CTCP number is not defined for this station See definition of parameters X25GROUP and X25NUM in Installations Manual CTCP COMMAND REJECTED SPECIFIED NOT DEFINED TCP IP STACK The message occurs if a command which includes a specification of an X 25 CTCP TCP IP control task has been entered e g A RVSX C1 or A RVST C10 and the specified CTCP number TCP IP stack number is not defined see rvs start parameters member CNTL of the tables data set Installations Manual SPECIFIED CTCP NOT ACTIVE nn 4 b NOT READY TCP IP CONTROLTASK ALREADY ACTIVE The message occurs if a command wh
30. nnnnnn number of blocks which have been transmitted day time day and time the data set has to be queued for transmission or has been received sid2 stations identification of the first or final station jobname name of the job which is to be automatically started in case of the received data set has to be printed DF4102I NO RECORDS FOUND This message appears as a reply to control data set queries DFz if no records have been found in the control data set DF4103I MORE THAN 100 ENTRIES FOUND DISPLAY IS INCOMPLETE This message appears as a reply to control data set queries DF when more than 100 entries have been found In this case only the first 100 entries that are found in the control data set will be displayed DF4105I1 f sid mn SYSOUT a FORM bbbb DEST cccccc COPIES dd This message appears as a reply to the command DR in connection with the message DF4101 in case of the received data set has to be printed These parameters are either specifications of the remote station or the content of a resident receive record They are copied to the job control statements of a job which is automaticaly started after the receiption of the data set The meaning of the parameters is a SYSOUT class bbbb SYSOUT formular number cccccc distination name of a RJE station dd number of SYSOUT copies DF42011I job volume DSN dsname COPY INCOMPLETE This message may occur if the command DJ has been entered Before transmiss
31. rvsMVS Messages and Codes 5 rvs Messages This page will be intentionally empty rvsMVS Messages and Codes 5 rvs Messages Messages of the FTP Driver Task STARTED DF8800I D sid sesid FTP DRIVER TASK 1 b VERSION sToPPED vvv dd mm yy tt mm aa bb cc Start or stop of FTP Client Task message vvv specify version of FTP Client Task dd mm yy tt mm time of assembly aa bb cc time of last changes in the FTP Client Task DF8803E D sid sesid FTP DRIVER ABEND CODE EP PSW The FTP Client Task issues this message when an abend occurs The message shows the system abend code the entry point of the program and the address where the abend occurred When an abend occurs task termination will be done after all subtasks have been terminated DF88041I D sid sesid REGS 0 7 xxxxxxxx XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX The FTP Client Task issues this message when an abend occurs The message shows the content of the registers 0 to 7 at the time of the abend DF8805I D sid sesid REGS 8 15 xxxxxxxx XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX The FTP Client Task issues this message when an abend occurs The message shows the content of the registers 8 to 15 at the time of the abend DF8840P D sid sesid Driver event The FTP Client Task issues this message when find appropriate FTP Driver event The following list describes the different FTP Driver
32. this message DF5510E f sid 111 PASSWORD MISSING TO CONNECT THE LINE Additional to the identification a password exchange after identification is defined for station sid see rvs stations table But the expected record type for password exchange has not been received from sid after identification After this the line connection with station sid will be broken DF5511E f sid lll INVALID PASSWORD RECEIVED Additional to the identification a password exchange after identification is defined for station sid see rvs stations table But the received password did not match the values specified for station sid within the rvs stations table parameter RECVPW After this the line connection with station sid will be broken DF5512E f sid lll NO VALID STATIONS ENTRY FOUND FOR sid A request for autodial to station sid has been passed to the line control program But the stations entry for sid could not be found This error should not occur rvs program error DF5513E f sid 111 NO DIALNUMBER SPECIFIED FOR sid A request for autodial to station sid has been passed to the line control program But the stations entry for sid does not contain the number to be dialed see rvs stations table The dial request cannot be processed DF5514E f sid 111 CONNECTION FAILED The line connection failed is broken There are many reasons which may leed to this result line errors timeouts incorrect definition of the
33. A sid has been entered but starting of the subtask which activates session mn to station sid is not yet complete a module could not be loaded from disk Reason The requested module cannot be loaded from the rvs load library reserved by another job or the requested module is not in the rvs load library Action Stop the request by entering P sid mn The name of the requested module may be listed by entering the command X sid S A ALL VTAM TERMINATED WITH ERROR Activating of all sessions which are marked to be activated see stations table if command A ALL is entered terminated with or without errors A sid mn NSHEADER hhhhhh request CV xxxx REASON rr SENSE ssssssss This message indicates that the NSEXIT of the rvs VTAM control task has been activated The contents of the VTAM request unit will be analyzed and listed hhhhhh the request header requestthe type of request CLEANUP NOTIFY or NSPE XXXX the control vector key rr the reason code and sense information For a description of these fields see Advanced Communications Function for VTAM Programming SESSION NOT IDENTIFIED CID cid NETWNAMES lunames rvsMVS Messages and Codes 5 rvs Messages The session identified by cid has not been found lunames identifies the logical units of the VTAM network The reason for this message is a rvs internal error DF9027E SESSION TABLE MISSING The command A rvsVTAM has been ent
34. ABEND is coded in the program DF072A00 VSAM error in module DF173A00 PDF00154 rvsMVS Messages and Codes 3 rvs Abend Codes 1733 6C5 This ABEND is coded in the program DF073A00 Open error in module DF173A00 PDF00154 1734 6C6 This ABEND is coded in the program DF073A00 This ABEND occurs in different situations if the OPEN of the KDSAVE or KD data set fails or if the VSAM PUT macro fails or if the data set KDSAVE is empty or if the OPEN of the data set rvsLOG fails 1790 6FE This ABEND is coded in the program DF079C00 The program DF079CO0 initialization or reorganization the control data set has been executed The error occurred during checking the PARM string 1791 6FF This ABEND is coded in the program DF079C00 The program DF079CO0 initialization or reorganization the control data set has been executed The error occurred during updating the control data set GET PUT OPEN CLOSE 1792 700 This ABEND is coded in the program DF079CO00 The program DF079CO0 initialization or reorganization the control data set has been executed The error occurred during executing the macros SHOWCB GENCB or PUT RPL 1793 701 This ABEND is coded in the program DF079CO00 The program DF079CO0 initialization or reorganization the Control Data Set has been executed The first record of the Control Data Set used to initialize the data set does not exist 1800 708 This ABEND is coded in the program DFO80A00 During initiali
35. ABNORMALLY ENDED The stations table could not be accessed to Please be sure that the table with DD statement STATIONS may be opened by the rvs monitor rvsMVS Messages and Codes 5 rvs Messages DF2210P DF2211E DF2212E DF2213E DF2214E DF2215E DF2216E DF2217E DF2218E SPECIFIED TCP IP STACK name FOR STATION sid NOT DEFINED The specified TCP IP stackname parameter TCPIPADR for station sid could not be found Either the specified stackname is not valid or the corresponding TCP IP controltask is not defined for this stackname see rvs start parameter TCPSTKID in the CNTL member The specified station is not operational cannot be activated ERROR PPROF MISSING NO DEFAULT gt ENTRY FOR SID IGNORED U The mentioned Station Entry has been ignored because no program profile parameter has been specified ERROR SCNL MISSING NO DEFAULT gt ENTRY FOR SID IGNORED U The mentioned Station Entry has been ignored because no subchannel parameter has been specified ERROR SPROF MISSING NO DEFAULT gt ENTRY FOR SID IGNORED U The mentioned Station Entry has been ignored because no session profile parameter has been specified ERROR LUNAME MISSING NO DEFAULT gt ENTRY FOR SID IGNORED U The mentioned Station Entry has been ignored because no luname applid parameter has not been specified ie USERABEND 1022 RELAIS LIST OVERFLOW kee
36. ADDRESS ALRBPTR xxxx xxxx In case of a dynamic allocation error during allocating a receive data set the dynamic control blocks are listed DF3520I R sid REMOTE STATION NOT AUTHORIZED TO SPECIFY PROCESSING OPTION rvsMVS Messages and Codes 5 rvs Messages DF3521I DF3522E DF3523I DF3524I DF3525W DF3525W DF3525E DF3526E DF3527E A data set shall be received by station sid The transmitter of this data set has been specified some receive parameters i e specification of the receive volume The station sid is not authorized to define specifications like this The data set will be received in a normal way The specifications made by the transmitter are to be ignored see rvsMVS Installation Manual for different authorization levels R sid REMOTE STATION NOT AUTHORIZED TO REPLACE DATA SETS A data set shall be received by station sid The transmitter specified for this data set that in case of an already existing data set of an equal dsname on receiving side this data set is to be replaced But the station sid is not authorized for this function The data set will be received in a normal way The specification made by the transmitter is to be ignored see rvsMVS Installation Manual for different authorization levels A replacement of the data set doesn t take place R sid lll ERROR ON BLANK EXPANSION POSSIBLY REMOTE STATION SPECIFIED INCORRECT BLOCKSIZE An error occurred during expansion of compressed
37. All other requests are denoted by UNKNOWN and will be ignored A sid INVALID SESSION TYPE mn X xxxx REQUESTED SESSION REJECTED Via BIND request station sid tried to establish a session of type mn to rvs The session type mn is not defined in the sessions table entry for station sid CID cid UNKNOWN NO SESSION ENTRY ADDRESS During rvs initialization the rvs sessions tabele is dynamically updated with the cid The reason for this message is a rvs internal error A sid mn ATTACH FAILED RC xxxx rvsMVS Messages and Codes 5 rvs Messages DF90201I DF9021E DF90221I DF9023E DF9024I DF9025P DF9026P The subtask which activates session mn could not be started The station sid could not be connected to rvs The ATTACH macro terminated with return code xxxx STARTED f sid mn TRACE b STOPPED The rvs trace of session mn to station sid has been started stopped NOT ACTIVE f sid mn TRACE b lALREADY ACTIVATED The rvs trace for session mn to station sid should be activated but was already active or the trace should be stopped but was not active A sid mn REJECTED TRY LATER The activation of the session mn to station sid has been rejected because there is already an active session mn to station sid Before starting a new session the old one must be terminated Message DF9023 indicates the previous activated session A sid mn IS PENDING A command
38. DF9429P A sid accm sessonid SESSION REJECTED reason This message is issued by the Odette File Transfer Protocol task A request for establishing a session with station sid has been rejected reason may be one of the following conditions ISTATUS INACTIVE The stations entry for sid has been marked inactive but a connection with sid requires an active stations entry ISTATUS can be changed dynamically operator command F sid see rvsMVS Operations Manual ODETTE ID NOT FOUND An incoming call has been received But the received odette id is not defined whithin the own local stations table INVALID X25 TCP IP ADDRESS An incoming call has been received But the received address X25 number or TCP IP address does not match the address defined for this station whithin the stations table Checking of the remote address will be performed if parameter XNUMCHCK YES TCPIPCHK YES has been specified for this station or if this parameter is valid as a default if specified whithin the CNTL member MAXIMUM SESSION NUMBER EXCEEDED An incoming call has been received But the maximum number of parallel sessions defined for this station is exceeded The connection request is terminated with ESID reason code 08 resource not available DF9430E Z ORT ACCM SESSID QDATE QTIME SDATE 7 This message contains additional information to message DF9457E update send request failed DF9431I Z sid accm sessonid
39. ERRNO This message is issued when initapi fails The snmp task is terminated after this event Possibly the TCP IP configuration of SNMP is not correct XX API MODULE COULD NOT BE LOADED This message is issued when api module could not be loaded XX SEND MESSAGE FAILED ERRNO This message is issued when send fails XX SHUTDOWN CONNECTION FAILED ERROR ERRNO This message is issued when shutdown failes XX CLOSE SOCKET FAILED ERROR ERRNO This message is issued when close fails This message is issued when Get Host by Name fails XX GETHOST BY NAME RETURNED FOR LOCAL SOCKET This message is issued when Get Host by Name succeeded for own name XX GETHOST BY NAME RETURNED FOR PARTNER This message is issued when Get Host by Name succeeded for partner name XX SNMPY TRAP MNG TASK STOPED DF031Y TASK This message is issued when the Task was stopped rvsMVS Messages and Codes 5 rvs Messages DFY145P XX SNMPY TRAP MNG TASK CANCELED DF031Y TASK This message is issued when the Task was cancelled DFY146P XX SNMPY TRAP MNG TASK BREAKING DF031Y TASK This message is issued when the Task was stopped with break rvsMVS Messages and Codes 5 rvs Messages Messages of the SNMP Send Task DF031Z DFZ101P DFZ102P DFZ103E DFZ104E DFZ105E DFZ106E DFZ107E DFZ108E DFZ109E DFZ110E DFZ112E DFZ113P DFZ114P DF
40. FEATURE xxxxxxxx in A RECORD During l A record exchange the remote and receiving station specified in the A record is using some features At least one of these features is not supported by the local station If possible the transmission will be done by using a lower level of features rvsMVS Messages and Codes 5 rvs Messages DF9230P DF9235P DF9236P DF9237W DF9238I DF93011I DF9302E DF9303P DF9305E DF9306E DF93071I S sid mn EFFECTIVE SPEED nnnnn BPS After transmission of a trailer record the transmission speed is determinated for the current data set The greater the data set the more precise is the statement concerning speed With very small data set or in the event of a restart the speed determined is severely reduced by intensive computer activities ALLOCATION OPEN CONTROL CLOSE S sid mn r RECORD RECEIVED DSN dsname Reciving of a rvs protocol record type r is displayed on printout S sid mn r RECORD HAS BEEN SENT The transmission of a rvs protocol record type r is displayed on printout f sid mn INVALID NUMERIC VALUE IN r RECORD 0 ASSUMED A rvs protocol record type has been received from station sid which has an invalid structure This message indicates a program error in the program of the remote station sid F ORT MO MAXIMUM ERROR RETRIES REACHED FOR DSN name The maximum error retries reached for dataset The transmission will be cancelled SCRATCHED
41. FOR LINE 111 The rvs stations table contains too many station entries that use the same BSC line Ill III denotes the subchannel address of the line A maximum of 200 station entries may define the same line This message may be issued after activation of line Ill in this case the activated line control is terminated with user abend 551 DF5502E OPEN ERROR ON LINE 111 An activation command for line Ill has been entered During initialization of the line control program the open processing for the line failed After this message the linecontrol will terminate with user code 20 dec DF5503A A 111 111 READY TO TRANSMIT An activation command for the switched BSC line Ill has been entered This message indicates that activation of the line has completed successfully This is the status where the line control program is waiting for start of data traffic on the line DF5504E f sid 111 INVALID STATION ID RECEIVED A line connection das been established dialing During execution of the identification phase the remote station has sent an identification which is not defined within the rvs stations table As a result of this error the line connection will be broken The rvs trace see chapter 8 may be used to determine the reason for this DF5505E f sid lll LINE CONNECTED This message indicates that a lineconnection with the remote station sid on line Ill has been established and that the identi
42. International link busy Transit network facility problem Remote network facility problem International routing problem Temporary routing problem Unknown called DNIC Maintenance action 5 2 2 Diagnostic Codes from the DTE 00 Normal initialization or termination rvsMVS Messages and Codes 5 rvs Messages Invalid packet type For state DCE timer expired general Incoming call Clear indication Reset indication Restart indication DTE timer expired general Call request Clear request Reset request Restart request QLLC error general Undefined C field Unexpected C field Missing I field Unidentified field I field too long Frame reject received Invalid QLLC header Data received in non data state Timeout condition XID negotiation error PSH error general Sequence error PS header too short PSH format invalid Command undefined Invalid PSH protocol Data received wrong state Timeout condition Packet not allowed Invalid M bit packet sequence Invalid packet type received Control packets except Reset Indication received in state P4 Unassigned logical channel number Timer expired for interrupt confirmation or D bit not support Packet too short Packet too long Invalid G
43. JCL DATA SET NOT UNCATALOGED RC xx dsname NOT SCRATCHED RC yy zz A data set has been received which contains JCL This JCL has been passed to the internal reader for execution After this the JCL dataset is no longer needed and has been scratched If the data set could not be scratched the returncode yy and the status code zz of the scratch macro is displayed If the dataset has been scratched but not uncataloged the returncode xx of the catalog macro is displayed R sid mn RECEIVING OF REJECTED ALREADY TRANSMITTED See DF3738bE f sid mn sid2 dsname TIME OUT The transmisson of the data set identified by dsname will be terminated because a timeout situation has been detected During a time interval as specified for the session timer see description of the sessions table no data have been received on this session R sid mn SEND r RECORD FAILED SENSE xxxx yyyy see DF9105E R sid mn text see DF9106E R sid mn text rvsMVS Messages and Codes 5 rvs Messages DF9308E DF9309E DF9315E DF9326P DF9329P DF9334P DF9334P DF9335P DF9336P DF9337P The error message text has been received from the remote station Most times this message occures in conjunction with an abnormally terminated transmission of a data set R sid mn rvs PROTOCOL VIOLATION RECORD IGNORED A rvs record has been received from the remote station sid This record is not within the rooles of the
44. Make sure that the sender provides for an ODETTE ID that is not blank especially when using a relais station DF88V5P 7 KDUPDAT 88V TYP This message is issued by the FTP task List internal action of FTP task with KD control file For internal use only DF88WOI JOB jobname jobnumber STARTED TO PROCESS filetyp FILE FOR dsname The data set dsname is processed for filetyp from the job jobname jobnumber FTP job is started for processing of filetyp the data set dsname The filetyp are Header File Trailer file End to End File Delete File DF88W1P 7 KDUPDAT 88W 2 TYP This message is issued by the FTP task List internal action of FTP task with KD control file For internal use only DF88X1E F sid UN ALLOCATION ERROR xxxx yyyy FOR dsn An error occurred during allocation or unallocation of a data set DYNALLOC macro returned with errorcode xxxx and infocode yyyy The codes are described in OS VS2 MVS SPL Job Management DATASET ALLOCATED TO ANOTHER JOB REQUESTED UNIT NOT AVAILABLE VOLUME xxxxxx NOT MOUNTED DF88X2E F sid REQUESTED UNIT yyyyyyyyy UNDEFINED t VOLUME xxxxxx NOT AVAILABLE DS ALREADY EXISTING ON VOLUME xxxxxx l ALL VOLUMES OF UNIT yyyyyyyy OCCUPIED J This message is always issued in relation with msg DF88X1E and shows a short explanation of the DYNALLOC macro return code XXXXXX volume number yyyyyyyy unit number DF88X3P F si
45. RECEIVED DSN dsname Receiving of a rvs protocol record type r is listed on printout R sid mn r RECORD HAS BEEN SENT The transmission of a rvs protocol record type r is listed on printout R sid FIRST STATION sid ORIGINATOR IS NOT DEFINED IN rvsMVS Messages and Codes 5 rvs Messages STATIONS TABLE A data set is to be received from a remote station Originally it comes from a third station sid but this station id is not defined in the local stations table The receiving of this dataset ist rejected DF9338I F ORT MO MAXIMUM ERROR RETRIES REACHED FOR DSN name The maximum error retries reached for dataset The transmission will be cancelled DF9339I F ORT MO VSAM OPERATION SUCCEEDED AFTER XXXX ATTEMPTS A VSAM operation failed but was succsessful after XXXX attempts DF9340E F ORT MO OPERATION FAILED WITH RC XXXX TRANSMISSION WAS NOT ROUTED It occurs if a received dataset is to routed to a stationand a VSAM operation failed Routed Sendrequest was not created DF9341I F ORT MO KD KEY ASREM lt DSN gt REDAY DATE TIME START DATE TIME gt Detailed information to message DF9340E e DSN e READY DATE and REDAY TIME e START DATE and START TIME rvsMVS Messages and Codes 5 rvs Messages Messages of the ODETTE FTP task All message identifiers produced by the ODETTE FTP task are of format DF94xxn If the messages are issued from the X 25 component the message id is foll
46. REREAD OF RECORD NOT OK PUNKT 1 This message appears only within the rvs protocol for internal use only Dispatcher trace command T DISP It indicates that during selection of send request KD record was change for send session nm to station sid and access method acme DF5255P S sid acme nm REREAD OF RECORD NOT OK PUNKT 2 This message appears only within the rvs protocol for internal use only Dispatcher trace command T DISP It indicates that during selection of send request KD record was change for send session nm to station sid and access method acme DF5256P S sid acme nm PRIOR RESOURCE STILL IN USE WAIT FOR POST This message appears only within the rvs protocol for internal use only Dispatcher trace command T DISP It indicates internal problems within the rvs monitor for send session nm to station sid and access method acme Report this message to the system programmer DF5257P S sid acme nm SERIALISATION PROBLEM DON T SEND ENTRY This message appears only within the rvs protocol for internal use only Dispatcher trace command T DISP It indicates internal problems within the rvs monitor for send session nm to station sid and access method acme Report this message to the system programmer DF5259P S sid acme nm POSTCODE 4 BUT SESSION IS NOT DISPATCHABLE This message appears only within the rvs protocol for
47. The number of relay stations exceeds the maximum limit of 66 stations See also User Abend 1022 ERROR AUTODIAL OR AUTOACT REQUIRED gt ENTRY FOR SID IGNORED U The mentioned Station Entry has been ignored because the AUTODIAL parameter as well as the AUTOACT parameter has been specified Only one of them can be accepted ERROR ERROR IN SEND RECEIVE PASSWORD gt ENTRY FOR SID IGNORED U The mentioned Station Entry has been ignored because the send or receive password is invalid ERROR ODETTE ID MISSING gt ENTRY FOR SID IGNORED U The mentioned Station Entry has been ignored because no ODETTE identification has been specified rvsMVS Messages and Codes 5 rvs Messages DF2219E DF22201 DF2225I DF222CI DF2225I DF2226W DF2227E DF2228W DF2229W DF2230W DF2231E ERROR X 25 NUMBER MISSING gt ENTRY FOR SID IGNORED U The mentioned Station Entry has been ignored because no ODETTE identification has been specified TOTAL NUMBER OF INTERNAL STATION TABLE ENTRIES The number of internal station entries is higher than the number of remote stations because rvs creates one entry for every subchannel definition and one entry for every backup station defined by BCKP ERROR LU62MODE MISSING NO DEFAULT gt ENTRY FOR SID sid IGNORED The mentioned Station Entry for a LU6 2 station has been ignored because no LU62MODE parameter has been
48. The send request for this dataset should be deleted because it cannot be assumed that the remote station will be able to support PDS transfer in the next time This function is supported only by stations which have installed rvsMVS release 1 0 or a following release DF5801I R sid dsname member SUBMITTED JNM name number A data set has been received from station sid After reception of the file the data set dsname member has been submitted automatic jobstart after receiving member and number denote the name and number of the submitted job rvsMVS Messages and Codes 5 rvs Messages DF5802E DF5803I DF5804I DF5805I DF5806I DF5807I dsname member R sid SUBMIT OF FAILED RC xx ldsname J After reception of a data set from station sid the data set dsname or the member member of the PDS dsname should have been submitted During this action an error occurred The JCL could not be submitted The following returncodes hex may occur 0x04 The data set dsname was not allocated or could not be allocated 0x08 The member member does not exist in the PDS dsname 0x0C Error during accessing the internal reader or the data to be submitted have not a recordlength of 80 or exit DFUXOOS could not be loaded 0x10 Execution of exit DFUX003 ended with a returncode of 12 dec or higher 0x14 The data to be submitted are not a valid job This means the first card s of the data to be subm
49. The size of the file to be sent is not available whithin the send request should not occur or a restart is to be done receive The size of the file must be determined by reading the file TIMEOUT problems may be caused by very big files S ORT ACCM SESSID SEND OF ERP FAILED DSN dsname This message is issued if an EERP NERP could not be sent the remote station did not respond with an RTR OFTP protocol unit to the sent EERP NERP The EERP NERP is set into HOLD status a next attempt for sending is not be made before the holdreset time interval has expired S ORT ACCM SESSID REMOTE STATION DOES NOT SUPPORT function This message is issued if a file is to be sent to the remote station but the remote station does not support the required function function may be PDS TRANSFER the file to be sent is a PDS or RECEIVING OF FILES the remote station can only send files This message is followed by DF9446E The send request is cancelled no further restart will be made after this situation S ORT ACCM SESSID TRANSMISSION OF dsname CANCELLED This message is issued in conjunction with message DF9445E or DF9457E S ORT ACCM SESSID SYSTEM ABEND sss DETECTED RECOVERY IN PROGRESS This message is issued when an abend sss has occured whithin the OFTP task A special recovery is done for system abends B37 D37 and 837 Other abends will cause an abnormal termination of the OFTP task R sid ACCM SESSID ENQ RETURNCOD
50. XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX This message is issued by the rvs X 25 CTCP task when an abend occurs The message shows the content of the registers 8 to 15 at the time of abend nn COMMAND REJECT FROM GATE FOR COMMAND CURRENTLY NOT EXECUTABLE This message is issued by the rvs X 25 CTCP task when a VTAM Send request is completed with return code 0404 and sense 081C This indicates that a command sent by the CTCP is temporarily not executable by the GATE function in the IBM NPSI product The reason for command reject is probably that an X 25 Clear packet has been received from the network on the associated virtual circuit It can be a temporary problem that may be solved by stopping the CTCP task using the command P rvsX or even B rvsX and starting it again If this does cases it might be a permanent error Reload of the NCP NPSI will solve this problem nn SESSION REJECTED FOR STATION sid ISTATUS INACTIVE A request for establishing a session with station sid has been rejected because the stations entry is not released until now ISTATUS can be changed dynamically by the Operator see rvs Operations Manual if neccessary nn LOGON REQUEST REJECTED BY rvs LOGON EXIT This message is issued by the rvs X 25 CTCP task when the logon exit was scheduled but rvs did not accept the logon request for some reason There might be a temporary problem that is handled by rvs nn COMMAND REJECTED T
51. by the user exit R sid RECEIVING OF dsname REJECTED DUPLICATE FILE See DF3738E R sid RECEIVING OF dsname REJECTED ODETTE ID MISSING The ODETTE ID has not been specified by the sender The transmission is cancelled Make sure that the sender provides for an ODETTE ID that is not blank especially when using a relay station R ORT CALL OF DFUX001 INITIATED R ORT CALL OF DFUX001 COMPLETE R ORT text Messages DF1195P until DF1196P are for possible error detection only They are not in effect for users purpose R sid RESIDENT ENTRY RR FOR dsn IS USED While receiving the data set dsn a RR entry is used R ORT AR RR description DSN dataset name RR entries had changed and current already existing receive entry is influenced by these changes The receive entry is deleted and receiving of dataset will be started from scratch DSN dataset name of receive entry description describes changes and actions AR WITH RR IS NOT OK Matching RR was changed AR INV gt RR FOUND Found matching RR entry for current receive entry but current existing receive entry wasn t associated to a RR entry AR INV RR MISSING Didn t find matching RR entry for current receive entry but current existing receive entry was associated to a RR entry DELETE INV AR RECORD Action Current receive entry is deleted and receiving of dataset will be started from scratch R ORT USER ENTRY UR FOR name R ORT LOG ENTR
52. connections during transfer of rvsMVS FTP file If FTP returncode is equal 04 or 08 the FTP connection ended with error see rvs log messages DF8570E D sid sesid UN ALLOC FAILED nnnn mm VOL volume DSN dsn The FTP Server Task issues this message when an error occurs during allocation or unallocation of a dataset In the message is shown the return code from the allocation request and the volume and dataset name of the file for which the error occurred DF8571E D sid sesid OPEN FAILED FOR VOL volume DSN dsn The FTP Server Task issues this message when a dataset to be send or received could not be opened In the message is shown the volume and dataset name of the file for which OPEN error occurred DF8572I D sid sesid SUCCESSFUL FILE TRANSFER direction FILE dsn rvsMVS Messages and Codes 5 rvs Messages DF8573I DF85741I DF85751I DF85771I DF8581P DF8583I DF8584P DF8586P DF8598P The FTP Server Task issues this message when a file transfer has been successfully completed In the message is indicated whether the dataset was send or received direction and the dataset name dsn D sid sesid VOLUME volser IS NOT MOUNTED The FTP Server Task issues this message if the volume containing the file is not mounted D sid sesid FILE filename NOT FOUND ON SPECIFIED VOLUME The FTP Server Task issues this message if the file is not found on the volume specified in the KDRECORD Shown is the virtual file
53. during wait for CDT after one or more data blocks had been sent 02 Time out occurred during wait for EFID protocol unit response after EFID protocol unit was sent 03 An invalid File Protocol Unit was received during wait for data or credit or response to EFID 04 A protocol violation occurred during data transfer as listener ie a protocol unit was received that was not an EFID or ESID protocol unit or a data unit 05 Time out occurred during wait for data as listener Z sid accm sessonid UNRECOGNIZED PROTOCOL UNIT RECEIVED STATE nn IC mm This message is issued by the Odette File Transfer Protocol task when an unrecognized protocol unit is received The state and information code values indicate in which situation the error occurred State and info code values are described in message DF9403l Z sid accm sessonid INVALID FPDU RECVD STATE nn IC mm This message is issued by the Odette File Transfer Protocol task when a received protocol unit contains invalid data The state and information code values indicate in which situation the error occurred State and info code values are described in message DF94031 F sid accm sessonid SESSION TERMINATION STARTED This message is issued by the Odette File Transfer Protocol task when session termination starts in response to an operator cancel command F sid accm sessonid UNKNOWN STATION ID INV PASSWORD odette code rc This message is issued by the Odette File Transfer Protoc
54. enough units 046 02E Data set associated to ddname is open 047 02F Data set exits on all volumes of unit group 048 030 Insufficient space in the VTOC 049 031 Space could not de obtained because of l O Error 050 032 Absolute track is not available 051 033 Insufficient space on storage volume 052 034 Space request rejected by DADSM Exit 053 035 Requested space is not available on any volume In case that serious errors occur which can not be handled by rvs sense codes 004 006 or 010 the data set to be transmitted is set into HOLD status That means a new attempt to transmit the data set can be initiated by the operator or by system after an appropriate time interval rvsMVS Messages and Codes 5 rvs Messages 5 rvs Messages rvs message structure All messages of the rvs monitor contain a message code under which they are explained in this manual The message code has the following structure e g DF 3001 A RVS OC READY p type of message consecutive number routine which generates the message constant DF The following types of messages can occur Action required an error may be present an error is present information message of the remote station message appears only in printout used for display of internal trace data warning additional information Nzcoz mo Station related messages of the rvs monitor contain a function indicator station name and if applicable the
55. error information packet is received from the IBM NPSI product The message shows the virtual circuit that had the error the command in error and the associated reason code The corresponding virtual circuit will be closed nn RESET FOR PERMANENT VIRTUAL CIRCUIT RECEIVED CAUSE DIAG This message is issued by the rvs X 25 CTCP task when an X 25 Reset packet is received from the IBM NPSI product The Reset is associated with a permanent virtual circuit that is currently not connected For cause code and diagnosis code see chapter 6 of this manual No further action is taken for this type of packet nn PAD DATA RECEIVED FOR MESSAGE This message is issued by the rvs X 25 CTCP task when a data packet with the Qualified Data Indicator is received A Qualified Data packet is a so called PAD message and the type of PAD message is shown in the message Also shown in the message is the task name that received the PAD message Note that PAD messages are taken care of by the CTCP nn ERROR IN PAD COMMAND RECEIVED TYPE CODE This message is issued by the rvs X 25 CTCP task when a PAD Error Indication message is received The message shows the error type and error code as reported in the PAD error message nn SEND DATA FLUSHED DUE TO LOCKED SERVER QUEUE This message is issued by the rvs X 25 CTCP task when data to be sent to the Odette File Transfer Protocol task was rejected due to a locked server queue ie the ta
56. events POST DISPATCHER DISPATCHER EVENT STOP OR CANCEL EVENT OPERATOR COMMAND EVENT ND FILE EVENT NE FILE EVENT NX FILE EVENT TD FILE EVENT AN FILE EVENT For internal use only DF88501 D sid sesid END OF FTP file type FILE TRANSFER The FTP Client Task issues this message routine when sending of FTP control file is ended The following list describes the different FTP Driver control files rvsMVS Messages and Codes 5 rvs Messages DF8851P DF8852W DF8853Z DF88611I DF8862E DF8863E DF8864E DF8865E DF8866E DF8868P DF8870E DF8871E DF8872I DF8873I HEADER DELFILE E E RESP D sid sesid END TO END RESPONSE RECEIVED DSN dsn The FTP Server Task issues this message when an End to End Response EEID protocol unit is received In case of errors additional messages DF8852W and DF8853Z will be given D sid sesid UNKNOWN EEID RECEIVED DSN dsn The FTP Client Task issues this message when an End to End Response EEID protocol unit is received but the EEID can not be associated with a previous file transfer In the message is shown the file name indicated in the EEID protocol unit D sid sesid EEIDDATE The FTP Client Task issues this message when an End to End Response EEID protocol unit is received but the EEID can not be associated with a previous file transfer The message shows the received data in the EEID protocol unit st
57. feed back code The codes are described in ACF VTAM Programming DF0301E DFnnnAnn COMPLETION CODE FOUND SYSTEM sss USER uuuu An non correctable error occurred The result is the ABEND of the subtask The codes sss and uuu are described in OS VS Message Library VS2 System Codes and in this Documentation Chapter 3 rvs Abend Codes DF03021I SNAP DUMP TAKEN ON rvsDUMP An extensive SNAP DUMP is generated when completion codes occur which were previously forced by the command DUMP SCC xxx or DUMP UCC xxxx STARTED DF0401I nn TRACE b FOR X 25 MASTER LU REMOTE STATION sid STOPPED rvsMVS Messages and Codes 5 rvs Messages DF04011 DF0402E DF0403E DF07011 DF0702E DF0703E DFO801I DFO802I A X 25 XMLU Trace was started stopped nn states the CTCP number sid shows the connected station STARTED nn TRACE FOR SES nnnnn REMOTE STATION sid STOPPED A trace for an X 25 or LU 6 2 station was started stopped nn states the CTCP number in case of X 25 nnnnn shows the session number nn DYNALLOC ERROR xxxx yyyy FOR TRACE DATASET The message shows the error and info code of allocation of trace data set nn OPEN ERROR FOR TRACE DATASET The trace data set could not be open STARTED SESSION nn TRACE FOR 4 b XXXXX REMOTE STATION XXX lstopPED lsocxeT J A trace for an TCP IP or XOT station was started stopped XXXXX shows the socket s
58. has been rejected because the stations entry is not released until now ISTATUS can be changed dynamically by the Operator see rvs Operations Manual if neccessary DF5645I F sid R RECORD dsname OUTSIDE PROTOCOL BOUNDARY IGNORED A invalid R Record has been arrived Because of no transmission before this record will be ignored DF56461I F sid R RECORD XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX rvsMVS Messages and Codes 5 rvs Messages A invalid R Record has been arrived This record has a wrong length or incorrect fields COUNTER or DSN Line Control Program DF057B00 Look for non descripted messages to DF56xxx DF5703E F sid lll INVALID SEQUENCE OF PROTOCOL RECORDS A line connection to station sid has been established using line Ill During transmission sending or receiving of a dataset rvs detected an invalid flow of protocol records As a result of this error the line connection will be broken The reason for this error may be e the remote station does not handle the used transmission protocol in a correct way e the transmission protocol which is defined to be used for the remote station sid see member PROGPROF in the rvs tables dataset described in the rvs interface description is not correct This means the transmission protocol defined for station sid does not meet the protocol specifications which the remote station is able to process If this is a permanent error a rvs trace should be started in o
59. in KD dataset is no send request for sid found S sid acme nm DISPATCH SESSION This message appears only within the rvs protocol for internal use only Dispatcher trace command T DISP It indicates that selection of a send request for send session nm to station sid and access method acme has ended and requested session is posted S sid acme X 25 AUTODIAL STOPPED SVCMAX CNTL VALUE EXCEED a S sid acme X 25 AUTODIAL STOPPED ONE SESSION FOR SID EXIST b This message appears only within the RSV protocol for internal use only Dispatcher trace command T DIPS Message a indicates that maximal number of X 25 sessions for all X 25 stations SVCMAX parameter is exceed rvsMVS Messages and Codes 5 rvs Messages Message b indicates that for station sid maximal number of X 25 sessions one session is exceed Next session is not started DF5249P S sid acme LU6 2 AUTODIAL STOPPED LU62MAX CNTL VALUE EXCEED a S sid acme LU6 2 AUTODIAL STOPPED SESNUM STAT VALUE EXCEED b This message appears only within the RSV protocol for internal use only Dispatcher trace command T DIPS Message a indicates that maximal number of LU6 2 sessions for all LU6 2 stations LU62MAX parameter is exceed Message b indicates that for station sid maximal number of LU6 2 sessions SESNUM parameter is exceed Next session is not started DF5254P S sid acme nm
60. internal use only Dispatcher trace command T DISP It indicates internal problems within the rvs monitor for send session nm to station sid and access method acme Report this message to the system programmer rvsMVS Messages and Codes 5 rvs Messages DF5260P S sid acme nm POSTCODE 4 BUT SESSION IS ALREADY DISPATCHED This message appears only within the rvs protocol for internal use only Dispatcher trace command T DISP It indicates internal problems within the rvs monitor for send session nm to station sid and access method acme Report this message to the system programmer DF5261P S sid acme nm POSTCODE 4 BUT SESSION IS NOT JUST DISPATCHABLE This message appears only within the rvs protocol for internal use only Dispatcher trace command T DISP It indicates internal problems within the rvs monitor for send session nm to station sid and access method acme Report this message to the system programmer DF5262I SEND TIME LIMIT EXCEEDED FOR DATASET name DF5270P S sid acme nm ULS CHECK STARTED SID sid FOR DATASET dsn This message indicates that a ULS check for send request is started for station sid and for data set dsn DF5271P S sid acme nm CHECK USER TABLE FAILED FOR RACF racfid This message indicates that a ULS user check failed for racfid DF5272P S sid acme nm CHECK PERMISSION TABLE FAILED This message indicates that
61. is issued by the rvs TCP IP task when the odette task is posted for termination The socket number and station is shown SPECIFIED STATION This message is issued by the TCP IP task when a command referring to a station is used Either the station could not be found the station was already active for activate command or the station is not active This message is also used to indicate a pending trace for a station which is not active at this time or stopping of a trace COMMAND OK This message is issued by the rvs tcp ip task in response to a command that has been accepted and executed ODETTE TASK HAS BEEN DETACHED S SID This message is issued by the rvs TCP IP task when the ODETTE task has been detached This message is issued by the rvs TCP IP task in response to a display DS command The message displays the used socket number the current tcb state and the station identification rvs station code and odette station code if a station is connected A IP ADDRESS MISSING OR INVALID ACTIVATION REJECTED This message is issued by the rvs TCP IP task when an activation command is to be executed The IP address of the remote station is not available not defined within stations table or not available by a name server The activation is rejected ACTIVATE REJECTED FOR STATION ISTATUS INACTIVE This message is issued by the rvs TCP IP task when an activation command is rejected due
62. is issued by the rvs X 25 CTCP task when an virtual control block VCB has been found and no appropriate session control table SCT entry exists rvs will handle this problem and release the VCB entry nn ACTIVE ODETTE TASK HAS BEEN DETACHED SESSION This message is issued by the rvs X 25 CTCP task when an active ODETTE task has been detached This happens only in that case that the subtask dies not respond any more nn ODETTE TASK NOT RESPONDING WILL BE CANCELLED This message is issued by the rvs X 25 CTCP task when an ODETTE task is not responding nay longer In this case it will be detached nn INVALID BUFFER BUFFERADDRESS DETECTED BUFFER NOT RELEASED This message is issued by the rvs X 25 CTCP task when a buffers is to be released In this case an invalid buffer address has been detected and the buffer will not be released nn JES ALLOCATION PROBLEM This message is issued by the rvs X 25 CTCP task if the JES3 alloc problem has been detected nn OFTP TASK ABEND SID DSNz 2 This message is issued by the rvs X 25 CTCP task when the ODETTE task EOT ECB has been posted DFXNST ENTERED DFXLOST ENTERED signified call NSEXIT LOSTERM VTAM Exit Routine LOSTERM A session with an LU has been temporarily interrupted or permanently lost the LU or VTAM operator requested that the session be terminated or an event occurred that can affect future operation
63. is neccessary to establish a session with the remote station R sid mn NO PASSWORD EXCHANGE DEFINED The remote station received your password but password exchange is not defined at the remote station Session has been rejected R sid mn PASSWORD NOT ACCEPTED Session rejected Password has not been accepted by the remote station order to validate the access to rvs MVS PFxx command Display default PF key settings PFKEYS member F sid mn PFxx command Display actual PF key settings Messages of the OFTP2 Security Control Task DFN301P DFN302P DFN303P This message is issued when an encryption task has been started XX encryption task number 22222222 encryption task version XX OFTP2 ENCRYPTION TASK ENDED This message is issued when an encryption task has been terminated XX encryption task number XX OFTP2 ENCR SID sid VDSN datasetname This message is issued after an encryption task has been started It shows the corresponding station ID and virtual dataset name XX encryption task number sid station ID datasetname virtual dataset name rvsMVS Messages and Codes 5 rvs Messages DFN306P DFN307E DFN308E DFN309E DFN310E DFN311E DFN312E DFN313E XX SECURITY FUNCTION ENDED SUCCESSFULLY This message is issued if the encryption function has been ended without errors XX encryption task number XX SECURITY FUNCTION FAILED RC DEC This me
64. line address of the TP line on which the transmission is taking place e g DF30091I f RII 050 READY TO TRANSMIT Line address subchannel of BTAM line station name active function rvsMVS Messages and Codes 5 rvs Messages or DF99041I Xo REL RZ X SESSION TERMINATED FOR LU lu D indication of VTAM session station name active function Active functions f are A the line is activated but no transmission of data is taking place entry to the control data set is inserted M processing of operator messages Q scanning for data sets to be transmitted queued requests This character is also used for all messages which are displayed on the screen of the remote operator see Installations Manual receiving of data transmission of data used for display of internal trace data indication of speed velocity message concerning start of rvs traces message concerning stop of rvs traces OM c om VTAM sessions are denoted by O operator communication S transmission of data sets R receiving of data sets O S R indicates the type of a VTAM session If there is defined more than one session of the same type to the same station the session type is followed by increasing numbers e g R1 first receive session R2 second receive session etc rvsMVS Messages and Codes 5 rvs Messages DFOOO01I nn NO RESPONSE ON OUTGOING CALL SID LUz 7 7 This messag
65. message is not displayed on console PRIV AREA xxxxxK FREE yyyyy K USED zzzzz K This message is displayed in conjunction with message DF2000P if rvs is running in a non MVS XA environment There is a PRIVATE AREA of xxxxx K The free space of this area is yyyyy K the used space is zzzzz K This message is not displayed on console ALLOCATED PRIVATE STORAGE nnnK BELOW 16 MB UNALLOCATED PRIVATE STORAGE mmmK BELOW 16 MB MAX REGION SIZE rrrK BELOW 16 MB This message is displayed in conjunction with message DF2000P if rvs is running in a MVS XA environment nnn denotes the size of virtual storage below 16 MB which is currently used by the rvs monitor rvsMVS Messages and Codes 5 rvs Messages rrr denotes the maximum available region size on the host below 16 MB this value is independent of the regionsize which is valid for the rvs monitor for example as specified within the REGION parameter of the EXEC card mmm denotes the size of currently unallocated virtual storage below 16 MB For this value the following formula is valid mmme rrr nnn So mmm is not the value for the size of unused virtual storage within the region of the rvs monitor This message is not displayed on console rvsMVS Messages and Codes 5 rvs Messages This page will be intentionally empty rvsMVS Messages and Codes 5 rvs Messages Messages of the Initialization of Station table DF22001I DF2201W
66. more information refer description of cryptlib error numbers XX 7 7 7 2 0 7 77 77 7 7 7 7 7 77 777 7 7 7 7 777 7 This message shows a description of the error number of message DFN313E XX encryption task number XX SEND REQUEST NO LONGER AVAILABLE PROCESSING STOPPED This is issued if an encryption was started but the corresponding record is not longer available in the control dataset Probably it was already processed by another task XX encryption task number XX SEND REQUEST DELETED BY OPERATOR This message is issued if the encryption task was deleted by operator command XX encryption task number XX 777 7 7 77 77 7 7 7 2 2 2 7 777 7 7 7 72 77 77 7 7 7 X This message is issued if a HSM PKCS 11 Interface error occurs Detailed description see below HSM PKCS1 1 error codes XX encryption task number XX 7772 7 7 77 77 7 7 7 2 7 777 7 7 7 72 2 77 77 7 7 7 X This message is issued if a ICSF error occurs You get information about returncode and reason XX encryption task number XX 7 72 7 7 77 77 7 7 7 2 77 777 7 7 7 77 77 7 7 7 X This message is issued if a GSK Global Security Kit error occurs You get information about the status of this call XX encryption task number XX 72 7 7 0 7 77 77 7 7 7 2 2 27 777 7 7 7 72 7 77 77 7 7 X This message is issued if a PKCS 11 IF error occurs You get info
67. name D sid sesid PHYSICAL DSN filename VOLUME volser The FTP Server Task issues this message if the file is not found on the volume specified in the KDRECORD Additional this message shows the physical dataset name of the file D sid sesid dsn NOT CATALOGED The FTP Server Task issues this message if the dataset to send is not found D sid sesid WORK FILE name EXIST The FTP Server Task issues this message when the FTP control file is found For internal use only D sid sesid DECODE OF HD FILE ID FAILED KDCOMLP nnnnnnnn The FTP Server Task issues this message when verification of HFID records ended with error The following list describes the different reason codes 0136 88 Duplicate file 0152 98 Real work file not exist 0160 A0 Invalid syntax 0164 A4 Invalid origin 0168 A8 Invalid destination 0172 AC Maximum record length not supported 0176 BO File already catalogued 0180 B4 Unspecified reason D sid sesid text nnnn cc VOL volser DSN dsn The FTP Server Task issues this message when during DFSMS function for a data set scratch locate catlg uncatlg or rename an error occurs In the message is shown the return code from the request and the volume not always and dataset name of the file for which the error occurred D sid sesid VERIFY HD FILE RC nn FILE dsn The FTP Server Task issues this message when verification HFID record failed Shown is the HFID file n
68. name The data sets to be transmitted must be queued again If the error occures again there is a programming error DELETED S sid dsname NOT 1 nn rc luNCATLGD After transmission of a data set this data set should be deleted or uncataloged The following errors can occur UNCATLG nn 08 data set was nor cataloged 28 error in catalog DELETED nn 08 rc 01 data set is not located on specified volume 02 data set is protected by PASSWORD 03 expiration date has not yet expired 04 I O error 05 volume is not mounted 06 amass storage volume could not be mounted 07 data set is still required by another job 08 the monitor is not authorized to erase an RACF protected data set 09 RACF error nn 12 rc 00 programming error R sid mn LOAD OF PDS COMPLETE VOLUME volume A dataset has been received from station sid The received dataset is an unloaded PDS which must be loaded again This message indicates that load of the PDS has successfully completed volume denotes the disk volume number onto which the loaded PDS has been stored mn denotes the session SNA or the line address BSC which was used for receiption of this file R sid mn DATASET dsname ALREADY EXISTS ON VOLUME volume A dataset has been received from station sid The received dataset is an unloaded PDS which must be loaded again rvs cannot load the received PDS onto the specified disk volume volume because a dataset with the same name already exists o
69. name of the failed rename DATASET GDG LOCATE RECOVERY NO NEW VERSION EXISTING The current GDG version could not be renamed cataloged rvs checks whether the current version of the GDG is still the highest version If the current version is not the highest version rvs determines the next new version and tries to rename catalog this new version This message displays that recovery by increasing of the version number is not possible rvsMVS Messages and Codes 5 rvs Messages DF37251 DF3726P DF3727E DF3728E DF3729E DF3730P DATASET ALREADY CATALOGED dsname The received data set could not be cataloged after reception because a data set with identical name dsname already exists The data set will reside on disk under a temporary name with timestamp DATASET ALREADY CATALOGED AND NOT RE RENAMED RC DATASET NOT CATALOGED AND NOT RE RENAMED RC The received data set could not be cataloged after reception but has already been renamed to its final name While renaming it back to its temporary name an error occurred For return and diagnosis codes xxxx xxxxxxxx see DFSMS MVS Diagnosis Reference The data set will reside uncataloged under its final name on disk DATASET NOT UNCATALOGED dsname The temporary data set with timestamp dsname has been renamed to its final name but could not be uncataloged R sid mn dsname nnn RE VOL volume status Receiving of the data set dsname on v
70. of monitor t1 and t2 denote the time interval backward from the current time the format is dd hh mm days hours minutes DF5820I DSN name CNT n T3 t3 T4 t4 DF58211 DF5822I DF5823E DF5824E DF59011 DF5902E DF5903E 2 22 OPEN COMPLETION CODE This message is displayed as a response to command DS JDSLIST ALL The message is displayed for each jobdataset currently included in the cache list name dataset name of the jobdataset n number of job submits from this jobdataset since last insert of this dataset into the cache list t3 time when the jobdataset has been inserted last time into the cache list t4 time of last job submit from this dataset t3 and t4 denote the time interval backward from the current time the format is dd hh mm days hours minutes UNALLOCATION ERROR XXXX YYYY FOR This message is displayed if unallocation of job dataset failed RESET OF JOBDATASET CACHE LIST COMPLETE This message is displayed as a response to command F JDSLIST R It indicates that processing of the reset command has been done OPEN FAILED FOR JOB DATASET This message is displayed if open of job dataset failed This message is an addition of DF5823E and shows the open completion code S sid dsname TRANSMISSION COMPLETE KEPT b DELETED J After transmitting a data set including the T record trailer record the receiving station answers wit
71. of the TCP IP line driver of rvsMVS for the TCP IP stack of Interlink DF83511I DF8352P DF8353I DF83541I This message is issued by the rvs TCP IP task when task initialization is complete The level of the program is shown This message is issued by the rvs TCP IP control task when task termination has started or is complete This message is issued by the rvs TCP IP task in response to a display DS command The message shows the level of the program 222222222 FAILED S RCS EQS This message is issued by the rvs TCP IP task when a TCP IP request fails The message shows the failing request the socket number for which the request was issued the return and the error code Remark For more information about the return and error codes refer to manual CISCO IOS for OS 390 Unprefixed Messages and Codes rvsMVS Messages and Codes 5 rvs Messages DF8355I DF8357E DF8358P DF8359W DF83601I DF8361P DF8362P DF8363E DF8364P DF8365I 9 7 7 7 0 27 77 77 7 7 2 2 77 777 7 7 7 7 77 77 7 This message is issued by the rvs TCP IP task in order to display a longer message text describing an error code API MODULE COULD NOT BE LOADED This message is issued by the rvs TCP IP task when the TCP IP interface is not available The TCP IP task will be terminated after this event This message is issued by the rvs TCP IP task when an IP connection has been es
72. of the session NSEXIT A network services request unit has arrived for the application program indicating for example that Asession with an LU has been terminated because of a disruption of the path used by the session A session establishment procedure has completed or failed See Comm Server SNA Programming SC31 8829 01 rvsMVS Messages and Codes 5 rvs Messages DF9598W DF9599P DF9599P nn FAILED FOR LU R0 R15 This message is issued by the rvs X 25 CTCP task when a VTAM request fails The message shows the failing request the logical unit that issues the request und register RO und R15 nn xxxxxxxx The X25 Task issues this message This message is issued if internal trace modul is used see command T RVSX The name of X25 Task subroutine that gets control is shown This message is for internal use only nn VCB CONID SESSION SID The X25 Task issues this message This message is issued if internal trace modul is used see command T RVSX This message is for internal use only rvsMVS Messages and Codes 5 rvs Messages Messages of the XOT Control Task DF9IO1I DF9I02P DF9IOS3E DF9I09W DF9I10W DF9I11W DF9I12W DF9I25W DF9I26E DF9I27I DF9128W This message is issued by the rvs XOT CTCP task when task initialization is complete nn states the CTCP number LV denotes to the current program version of
73. received data from station sid rvs internal compression of transmitted data May be the transmitting station sid specified invalid DCB attributes for this data set This is possible if the remote station works with the rvs DOS Monitor R sid nnn REMOTE JOB dsname NOT AUTHORIZED PROCESSING NOT STARTED The data set dsname from sid should be started as a job after reception remote JOB PROCESSING but the remote station is not authorized to use this function For a definition of station dependent authorization see rvsMVS Installation Manual description of rvs Stations Table parameter OPTIONS R sid nnn RECEIVED DATA COULD NOT BE CATALOGED RC xx The data set could not be cataloged For the reason see return code xx of the CATALOG macro IBM Brochure OS VS2 System Programming Library Data Management R sid NONZERO RETURN CODE OF INSTALLATION EXIT DFUX001 R sid ONLY INSTALLATION STANDARDS WILL BE USED TO RECEIVE dsname R sid RECEIVING OF dsname REJECTED BY DFUXOO1 See DF3735W DF3735E R sid text This message precedes the message DF3525W text is a message which is passed to rvs by the user exit R sid DATASET dsname ALREADY EXISTS ON VOL volume The data set dsname shall be received from station sid As a result of transmission control for example rvs start parameter VOLUME this data set is to be received on disk volume volume But a data set with this name is still existing on this disk
74. remote station and transferred to a final destination This final station is not defined within the station table of the remote station A data set is to be received in a remote station and transferred to a final destination The transmission is interrupted demigration is initiated A data set is to be received in a remote station but an I O error occured A data set is to be received in a remote station but the originator of the file is not defined within the station table of the remote station A data set is to be transmitted via ODETTE FTP The name of the file does not comply with the coding rules of OFTP data set names A data set is to be transmitted via rvsMVS FTP A PDS file is to be sending but rvsMVS FTP does not support PDS file transfer A data set is to be transmitted via rvsMVS FTP Invalid format of HFID control record A data set is to be transmitted via rvsMVS FTP A file is to be received and catalogued after transmission but a file with the same name is already existing catalogued Receiving of this file will be rejected A data set is to be transmitted via rvsMVS FTP FTP check routines find error conditions in FTP control output file connection error A data set is to be transmitted via rvsMVS FTP FTP check routines find error conditions in FTP control output file other error A data set is to be transmitted via rvsMVS FTP Send of FTP control file HFILE ended with error A data set is to b
75. required for this function because IBM made some downward incompatible software changes within MVS release SP 2 20 INCONSISTENT PARMVALUES TEXTLREC TEXTBLSZ SET TO DEFAULTS 2048 6000 One or both of parameters TEXTBLSZ TEXTLREC have been specified but the specified values are invalid or inconsistent either TEXTLREC is less than 5 or TEXTBLSZ is greater than 32760 or TEXTBLSZ is not greater than or equal to TEXTLREC 4 As a result of this error the default values 2048 6000 will be used SECURITY FEATURE ONLY FOR RECEIVING PART OWN ENCRYPTION KEY MISSING The parameter SECURITY EXT have been specified but without any security key identification This feature can t be used INCOMPLETE PARAMETER SPECIFICATION FOR SECURITY FEATURE SECURITY EXT MISSING The parameter KEYID have been specified but no SECURITY EXT parameter This feature can t be used space SP nnl mml1K SP nn2 mm2K TOTAL kkkk K Display of the used virtual storage Subpool nn has a size of mm Kbytes the used space of the address space is kkkk K bytes space may be substituted by PVT BRUTTO or PVT TOTAL That means PVT private area BRUTTO gt all used 4k pages are counted TOTAL gt all subpool space is added up This message appears in certain time intervals which are controlled by the rvs start parameter STORAC or if the command STORAC has been entered See rvsMVS Installations Manual or rvsMVS Operations Manual This
76. response record of the remote station has been received The rvs stream ended without any failure and the disposition of the data set has been executed DF3615E S sid mn WRONG R RECORD RECEIVED A rvs response record has been received but the contents of the record is not compatible with the contents of the actual record of the rvs control data set rvsMVS Messages and Codes 5 rvs Messages DF3616E DF3616E DF36251I DF3626E DF3634E DF3635P DF3701P DF3702E DF3702E DF3703P DF3703P S sid mn NO RACF AUTHORIZATION FOR dsnl S sid mn OLDDSN dsn2 The data set dsn1 shall be transmitted to station sid During this time an open error occurs System Completion Code 913 38 The rvs monitor has no RACF authorization to read this data set The second line of the message appears only if the rename function is to be used In this case dsn2 is the name of the physical data set which is without access rvs authorization After this situation the send request is set in hold status S sid mn dsname nnnnnnn RE VOL volume status The status message is generated at end or abend of transmission nnnnnnn denotes the number of transmitted records of the data set dsname on volume Status may be CANCELLED the transmission has been cancelled by operator ABEND sss uuu the transmission terminated with system sss or user uuu abend code END KEPT the transmission ended without failure S sid
77. rvs protocol The record will be ignored a just active data set transmission will be terminated R sid mn OUTPUT PROGRAM ERROR SYSTEM sss USER uuu TRANSMISSION CANCELLED The module which writes the data records to the output data set terminated with system completion code sss and user completion code uuu The transmission will be cancelled R sid mn REMAOTE BCC rrrr LOCAL BCC 1111 text The number of bytes transmitted in the last line buffer is not equal to the number of bytes in the received in the line buffer R sid mn INVALID FEATURE xxxxxxxx IN H RECORD The remote station indicated in a H record to transmit a data set by using some features At least one of these features is not supported or defined at the local station ENQ USE R sid mn b RETURN CODE xx DSN dsname DEQ HAVE The execution of ENQ and DEQ macros is listed on printout R sid FINAL STATION sid SPECIFIED BUT NO VALID ENTRY IN STATIONS TABLE A data set is to be received from a remote station It is to be transmitted to a third station sid but this station is not defined in the local stations table The receiving of this dataset ist rejected R sid RECEIVING REJECTED BECAUSE OF PARM NORELAIS sid A data set is to be received from a remote station It is to be transmitted to a third station sid but routing to this station is to be suppressed Parameter NORELAIS sid The receiving of this dataset ist rejected R sid mn r RECORD
78. sid sesid VOLUME volser IS NOT MOUNTED The FTP Client Task issues this message if the volume containing the file is not mounted rvsMVS Messages and Codes 5 rvs Messages DF88741I D sid sesid FILE filename NOT FOUND ON SPECIFIED VOLUME The FTP Client Task issues this message if the file is not found on the volume specified in the KDRECORD Shown is the virtual file name DF88751I D sid sesid PHYSICAL DSN filename VOLUME volser The FTP Client Task issues this message if the file is not found on the volume specified in the KDRECORD Additional this message shows the physical dataset name of the file DF8877I D sid sesid dsn NOT CATALOGED The FTP Client Task issues this message if the dataset to send is not found DF8881P D sid sesid WORK FILE name EXIST The FTP Client Task issues this message when the FTP control file is found For internal use only DF8884I D sid sesid FILE name WORK FILE ALLOCATIONS ERROR The FTP Client Task issues this message when allocation for FTP control file ended with error For internal use only DF8887P D sid sesid FILE name SEND ERROR reason cod The FTP Client Task issues this message when an error occurs during decode of a received Trailer File Id TFID protocol unit The following list describes the different reason codes 01 Invalid filename 02 Invalid destination 03 Invalid origin 04 Storage record format not supported 05 Maximum r
79. specified and no default LUG2MODE in the CNTL member has been specified too ERROR LU62MODE MISSING NO DEFAULT ERROR LU62MODE MISSING NO DEFAULT WARNING INVALID PARMVALUE pppppppp vvvvvvvv HEX PAIRED NECESSARY gt VALUE FOR SID sid IGNOREDU The value for the specified parameter should be hex paired ERROR TO MANY rvsWIN STATIONS YOUR LICENCE ALLOWS ONLY nnnnn INSTALLATIONS gt ENTRY FOR SID sid IGNOREDU The station contents table are more rvsWIN stations than your licence key allows The following rvsWIN stations will be ignored Please contact your software distributor WARNING INVALID INDEX xxxxxxxxxxxx AT ENTRY sid IGNORED The parameter s index is invalid outside of 1 99 or contents other characters than 0 9 WARNING INVALID PARMVALUE pppppppp vvvvvvvv HEX DESCRIPTION REQUIRED gt VALLUE FOR SID sid IGNOREDU The parameter requires hex description but the specified value includes other characters than 0 9 A F WARNING INVALID PARAMETER pppppppp vvvvvvvv SID IS NOT DEFINED FOR X 25 gt VALUE FOR SID sid IGNOREDU The parameter is X 25 specific but the station is not defined for X 25 access method X25 ERROR FTPHNAME PARAMETER IS MISSING gt ENTRY FOR SID IGNORED For using the FTP component the FTPHNAME parameter is mandatory rvsMVS Messages and Codes 5 rvs Messages DF2232E DF2233E DF2234E DF2235E DF2237P DF2238W D
80. status flags CSWST status bits from the CSW channel status word for the last CCW channel command word that was executed SENSE sense information DF1203E f sid 111 BTAM I O ERROR CHANNEL STATUS status A BTAM I O ERROR has occurred during data traffic with station sid on BSC line III III denotes the subchannel address The error is recorded by the rvs error recovery routine for BTAM I O status may be one of the following values obtained from status bits from the CSW channel status word for the last CCW channel command word that was executed CHANNEL CONTROL CHECK INTERFACE CONTROL CHECK CHANNEL DATA CHECK ATTENTION STATUS MODIFIER CONTROL UNIT END BUSY UNIT CHECK CHAINING CHECK PROGRAM CHECK PROTECTION CHECK UNIT EXCEPTION INCORRECT LENGTH In case of a UNIT CHECK one of the following additional error information is displayed within this message obtained from sense information field of DECB EQUIPMENT CHECK LOST DATA TIMEOUT INTERVENTION REQUIRED BUS OUT DATA CHECK OVERRUN COMMAND REJECT DF12311 PROCESSING OF COMMAND cmd STARTED nnnnn rvsMVS Messages and Codes 5 rvs Messages DF1231I PROCESSING OF COMMAND cmd ENDED nnnnn Indication that the specified command cmd is processed Start and end of processing for the following commands cmd is displayed Y STATIONS dump of the incore rvs stations table Y SESSIONS
81. support session mn to station sid logical unit lu xx 40 by OPENSEQ after receiving a bind request 80 by OPENDST AQUIRE after entering A sid A0 by SIMLOGON CO by OPENDST ACCEPT after receiving a logon request DF9901E R sid mn INVALID SESSION INITIALIZATION PARAMETER The calling program passed an invalid initialization module to the receive module see message df9900I SESSION ESTABLISHED FOR LU lu CID cid DF99021 R sid mn SDT REC SESSION OK a lOPENSEC OK J The session mn to the logical unit lu with ClD cid has been established In case of a primary logical unit this message occures two times e the first time with the text OPENSEC OK session established but no data traffic is possible at this time e the second time with the text SDT REC SESSION OK now data may be exchanged This message is also displayed if a clear command has been received DF9903E R sid mn LU lu macro FAILED RTCD xx yy FDBK2 zz REQ rr SS ssss US uuuu ADR aaaa The VTAM macro macro for supporting the logical unit lu ended with failure For a description of the codes XX register 15 yy register 0 zz feedback code rr request code ssss system sense code uuuu user sense code see the related section in this manual aaaa specifies the displacement in bytes to the beginning of the receive module see Advanced Communication Function for VTAM Programming DF9904I R sid mn SESSION TERMINATED
82. the national telephone company for the meaning of some of these codes Additional if the remote side uses non IBM equipment some of the codes may have other meanings 5 1 X 25 Cause Codes 5 1 1 Cause Codes within clear indication packet DTE originated When the cause code is X 00 the diagnostic code field has been passed through the network from the remote DTE s original Clear Request packet Number busy Invalid facility request Network congestion Out of order Access barred Not obtainable Remote procedure error Local procedure error RPOA out of order Reverse charging acceptance not subscribed Incompatible destination Fast select acceptance not subscribed Ship absent rvsMVS Messages and Codes 5 rvs Messages 5 1 2 Cause Codes within reset indication packet DTE originated When the cause code is X 00 the diagnostic code field has been passed through the network from the remote DTE s original Reset Request packet Out of order Applicable to permanent virtual circuits only Remote procedure error Local procedure error Network congestion Remote DTE operational Applicable to permanent virtual circuits only Network operational Applicable to permanent virtual circuits only Incompatible destination Network out of order DTE restarting Local procedure error Network congestion Network operational Registration cancellation co
83. the command F sid PP2ppp this message appears and indicates a list of valid program profiles f sid SIZE PARAMETER MUST BE 250 2000 The specified SIZE subparameter of the command F sid was not within the range 250 2000 f sid TOO MANY SUBPARAMETER For a subparameter of the command F sid to many values have been specified f sid SUBPARAMETER TOO LONG A value for a subparameter of the command F sid has been specified and the value consists of to many characters F sid INVALID VALUE For a parameter of the command F sid a wrong value has been specified F sid NO ENTRY PROCESSED For a parameter of the command F sid a wrong value has been specified F sid INVALID INDEX For a parameter of the command F sid a wrong index has been specified F ORT F ORT F ORT F ORT F ORT NO GZIP LICENCE COMMAND IGNORED NO SECURITY LICENCE COMMAND IGNORED NO VIRTUAL STATION LICENCE COMMAND IGNORED NO USER STATION LICENCE COMMAND IGNORED NO TRANSFER RESTRICTION LICENCE COMMAND IGNORED The command F sid xxx is no valid licence X sid VTAM SUBTASK NOT ACTIVE The command X sid S will be executed only if the VTAM control task is active rvsMVS Messages and Codes 5 rvs Messages DF48020 DF4803I DF48040 DF48050 DF4808I LINE S 111 112 113 X sid sid2 SIZE nnnn 1 b LLU S 1u1 lu2 1u3 J Reply of the command X sid L The alias name sid2
84. the program is shown DF8302P rvs TCP IP TERMINATION 7 7 This message is issued by the rvs TCP IP control task when task termination has started or is complete DF8303I TCP IP SUBTASK ACTIVE LV This message is issued by the rvs TCP IP task in response to a display DS command The message shows the level of the program DF8304I FAILED S ERRNO This message is issued by the rvs TCP IP task when a TCP IP request fails The message shows the failing request the socket number for which the request was issued and the error number For error number ERRNO see IP and SNA Codes SC31 8791 in Chapter 13 Sockets and sockets extended return codes Remark For request GETHOSTID the error number is not available set to zero Use the TSO command HOMETEST to get more information about the kind of the error DF8305I 9 7 7 7 0 0 27 77 7 7 7 7 02 7 77 777 7 7 7 7 77 77 7 7 7 This message is issued by the rvs TCP IP task in order to display a longer message text describing an error number DF8306E INITAPI FAILED ERROR This message is issued by the rvs TCP IP task when initapi failed The TCP IP task is terminated after this event DF8307E API MODULE COULD NOT BE LOADED This message is issued by the rvs TCP IP task when the TCP IP interface is not available The TCP IP task will be terminated after this event Note For some functions the MVS C runtime lib
85. the used line buffer SIZE nnnn and the defined BTAM lines or VTAM logical unit names are listed Active lines are signed with an A behind the line name X sid sid2 PP program profile The complete program profile associated to station sid is listed as a reply to the operator command X sid P see section 4 4 3 X sid mn sid2 SS sessions profile As a reply to the command X sid S the sessions profile used by station sid alias sid2 is listed see section 4 4 4 NoN X sid TO BACKUP FOR sidk sidm lsidi sidn As a reply to the command X sid RELAIS the next connected stations to station sid will be listed In case of no next connected stations are specified for station sid the word NON appears Stations which can be reached in case of a backup situation via station sid will be listed behind the parameter BACKUP FOR see section 7 6 3 X sid mn text As a reply to the command X sid the station parameters used by station sid are listed Messages of the DQ command DF4901I DF4902I DF4902I DF4903I sidl nn sid2 nn sid3 nn sid4 nn sid5 nn sid6 nn sid7 nn The number for outstanding send requests is indicated for each station sid This message is displayed after start of the rvs Monitor it is displayed again if the number of send requests has changed or if the command DQ has been entered NO QUEUED SEND REQUESTS or nnn QUEUED SEND REQUESTS This me
86. this error OFTP TASK ABEND cde SID sid DSN dsname This message is issued by the rvs TCP IP task when an OFTP task has been terminated abnormally Cde denotes the abend code system or user completion code Further the rvsMVS Messages and Codes 5 rvs Messages DF8338E DF8339E DF8340E DF8342I related station id sid and the dataset name dsname of the abended transmission are displayed JES ALLOCATION PROBLEM A hang up situation has been detected The reason for this situation is an allocation request which does not complete If this situation does not change whithin some minutes the rvs monitor should be stopped and started again LOCAL IP ADDRESS NOT RESOLVED This message is issued by the rvs TCP IP task during initialization of the task Parameter TCPLOCAD has been specified with a DNS Name This name could not be resolved by the domain name service The TCP IP control task will terminate after this error TCP IP INITIALIZATION FAILED This message is issued by the rvs TCP IP task during initialization of the task An error occured during initialization the tcp ip control task will terminate after this error This message is preceeded by one or more other messages indicating the kind of the error XX TCP IP SUBTASK COULD NOT BE STARTED NOT ENOUGH MEMORY This message is issued by the rvs TCP IP task when activation of further subtask OFTP Task is rejected because of storage shortage Messages
87. volume In this case rvs does not modify the existing data set Receiving of data set dsname will be cancelled by rvs The file can be received from station sid only if a data set with this name does not exist on the specified disk volume rvsMVS Messages and Codes 5 rvs Messages DF3528E DF3529E DF3530E DF35311I DF3532E DF36011I DF3603E DF3604A DF3605E DF3606E R sid INVALID HEADER FIELD fieldname value A headerrecord has been received indicating that a data set is to be received This record contains an invalid value in one of its fields The name of the field and the value of this field is displayed in this message As a result of this error the transmission will be terminated with user code 12 R sid RECEIVING OF dsname REJECTED DUPLICATE FILE See message DF3738E r sid FOR FIXED RECORD FORMAT BLOCK SIZE MUST BE IDENTICAL WITH RECORD LENGTH This message mainly refers to reception from a DOS station Fixed record format has been chosen but the block size is inconsistent with the record length R sid mn DATASET dsname IS NOW BEING RETRIEVED FROM MIGRATION See DF37401 R sid mn DATASET dsname COULD NOT BE RETRIEVED FROM MIGRATION See DF3741E S sid mn DSN dsname VOL volume STARTING The transmission of the data set dsname is starting If the transmission is a restart the message is extended by RESTARTS AT RECORD nnn an information about the restart count The message i
88. wasn t sent because the OFTP version of the partner is too low Z sid accm sessonid OPEN FAILED FOR VOL volume DSN dsn This message is issued by the Odette File Transfer Protocol task when a dataset to be sent or received could not be opened In the message is shown the volume and dataset name of the file for which OPEN error occurred Z sid accm sessonid DSN dsn VOL volume RESTARTS AT checkpoint This message is issued by the Odette File Transfer Protocol task when a file transfer is restarting ie a previous attempt has been made to transfer the file The restart point is indicated in the message and is expressed in records or 1K blocks depending on the file type In the message is also shown the volume and dataset name of the file to be transferred Z sid accm sessonid DSN dsn VOL volume STARTING This message is issued by the Odette File Transfer Protocol task when a file transfer is to begin In the message is shown the volume and dataset name of the file to be transferred R sid accm sessonid UNKNOWN EERP RECEIVED DSN dsn This message is issued by the Odette File Transfer Protocol task when an End to End Response EERP protocol unit is received but the EERP can not be associated with a previous file transfer In the message is shown the file name indicated in the EERP protocol unit ORIG origin DEST destination DATE yyddd TIME hhmmss This message is issued by the Odette File Transfer Protocol task when an End to End
89. when the last session for the indicated mode nmae is terminated Also shown is whether the request was accepted or rejected A request is rejected if no station can be found for the parter mode combination This message is issued by the rvs APPC task manager routine A FMH5 request was received from the indicated partner LU The FMH5 request is received when a new conversation is requested from a partner Also shown is whether the request was accepted or rejected A request is rejected if no station can be found for the parter mode combination SENSE xxxx This message is issued by the rvs APPC task manager routine A VTAM APPCCMD DEFINE request was issued to define the session limits to a partner node but the request failed In the message is shown the VTAM return and sense codes for the failing request Refer to VTAM programming manual for further information SPECIFIED STATION This message is issued by the rvs APPC task when a command refering to a station is used Either the station could not be found the station was already active for Activate command or the station was not active OK This message is issued by the rvs APPC task in response to a command that has been accepted and executed SESSION LIMIT nnn REACHED FOR STATION This message is issued by the rvs APPC task in response to an Activate station command The command cannot be honored as no more sessions are allowed to the station ACTIVATION REJEC
90. which might be generated not properly check compatibility with generation of PTT too If rvs tries to establish a connection and a clear packet has been received on outgoing call remote application is not active If rvs tries to establish a connection possibly a wrong number has been called wrong number specified for parameter X25NUM in STATIONS Table Possibly the value specified for the rvs start parameter WSIZE is not the same as generated for the X25 multichannel link by the national telephone company rvsMVS Messages and Codes 5 rvs Messages This page will be intentionally empty rvsMVS Messages and Codes 6 rvs Start Messages 6 rvs Start Messages This section describes most important rvs start messeages can t open trace config file DD EXTCONF This message occurs if the DD statement EXTCONF isn t defined in rvs start procedure This DD statement allocates a configuration file used for advanced capabilities This is a warning and currently for internal use only rvsMVS Messages and Codes 6 rvs Start Messages This page will be intentionally empty rvsMVS Messages and Codes Index BSC 14 31 32 53 55 58 59 60 88 90 104 115 116 117 Command DD 16 17 19 20 32 42 43 57 89 90 91 153 DDH 101 DDS 96 DF 14 16 17 78 82 83 86 87 109 110 150 DJ 79 DP 79 DS 29 51 52 53 71 78 83 84 120 123 124 127 144 146 165 175 181 189 DSP 55 DX
91. with renewed license rvsMVS Messages and Codes 5 rvs Messages DFX819E 9 7 7 2 9727 2299272 22992 2 22 2 927 2 2 This message shows information about license check failed e LICENSE CHECK FAILED errorvalue DFX820P 9 7 2 9002072 22992722 2 92 7 22 9 7 2 2 This message shows the license key content e LICKEY 96s DFX821E 7 7 0 0 27 77 7 7 7 2 2 77 777 7 7 7 7 77 77 7 7 7 This message shows information about a failed ENQ operation e ENQ OPERATION RET x REASON x TEST ENQ OPERATION ERROR ENQRET 0x x RET 0x x REASON 0x x TEST ENQ OPERATION RET 0x x REASON 0x x rvsMVS Messages and Codes 5 rvs Messages X 25 Cause and Diagnostic Codes This section describes the most important cause and diagnostic codes which may be received within clear or reset indication packets from the X 25 network These codes are important only if the X25 component of rvs is used Most of the codes and their meaning are obtained from the IBM manual IBM 3270 Information Display System X 25 Operation Form GA23 0204 1 Note that clear and or reset indication packets may be sent e by the remote DTE data terminal equipment or e by the remote DCE data circuit terminating equipment or e by the X 25 network So some of the occuring diagnostic codes are used only by the national telephone company responsible for the X 25 network this means it might be necessary in some cases to ask
92. 0 gt Transmission stopped by the operator 90 gt File size incompatible with recipient s protocol version 99 gt Unspecified reason 26 gt SFNA RETRY N 27 gt SFNA RETRY N 28 gt SFNA RETRY N Se STS TTI TI TI TI TION ONO ONO ONO Na rvsMVS Messages and Codes 5 rvs Messages DF9469P S ORT ACCM SESSID message text FILENAME name This message is issued additionally to DF94111 to display the corresponding file name The following message text may occure IGNORED FIX EERP IN KD IGNORED LOAD PDS FILE IGNORED CODE TRANS READ IGNORED CODE TRANS WRT DF9470E S ORT ACCM SESSID KDUPDATE OF ERP FAILED R C 77 HEX This message is issued if an EERP NERP can t stored in KD Additional information are given by message DF9489P DF9471P Z ORT ACCM SESSID LOG RECORD FOUND DSN name M DF9472P Z ORT ACCM SESSID LOG RECORD UPDAT DSN name M DF9473P Z ORT ACCM SESSID 242322 aaan LENGTH 3232323232234 DF9474P Z ORT ACCM SESSID 2 2 DF9475P Z ORT ACCM SESSID 17777777 SID DF9478P Z ORT ACCM SESSID CALL PARM 7757575 399999595 3999797955 DF9479P Z ORT ACCM SESSID HEADER RECORD DF9480E Z ORT ACCM SESSID RESTRICTION TABLE ERROR NO RECEIVE DF9481E Z ORT ACCM SESSID PERMISSION TABLE ERROR NO RECEIVE DF9483E Z ORT ACCM SESSID ONL TASK A
93. 013 4211014 4211015 4211016 4221001 4221002 4221003 4221004 4221005 4221006 4221007 4221008 4221009 4221010 HSMCERT_ERR_CERT_TOKEN_BY_LABEL HSMCERT_ERR_RECORD_TOKEN_BY_LABEL HSMCERT_ERR_FAKTOR_RSA HSMCERT_ERR_ALLOC_CERT_TOKEN HSMCERT ERR RECORD BY ID HSMCERT ERR FAKTOR RSA2 HSMCERT ERR OPEN KEY RING HSMCERT ERR GET CERT TOKEN BY LABEL FAILED HSMCERT ERR GET CERT TOKEN BY ID FAILED HSMCERT ERR DECODE SUBJECT NAME FAILED HSMCERT ERR GET CERT TOKEN BY SUBJECT FAILED HSMCERT ERR GET PRIVKEY TOKEN BY LABEL FAILED HSMCERT ERR GET PRIVKEY TOKEN BY ID FAILED HSMCERT ERR GET PRIVKEY TOKEN BY SUBJECT FAILED HSMCERT ERR EXPORT CERTIFICATE HSMCERT ERR EXPORT CERTIFICATE BY ID HSMRSA ERR FAKTOR RSA HSMRSA ERR ALLOC STRUCTURE HSMRSA ERR CSNDPKB ICSF CALL HSMRSA ERR CSNDPKB ICSF RESULT HSMRSA ERR CSNDPKD ICSF CALL HSMRSA ERR CSNDPKD ICSF RESULT HSMRSA ERR CSNDPKE ICSF CALL HSMRSA ERR CSNDPKE ICSF RESULT HSMRSA ERR CSNDDSG ICSF CALL HSMRSA ERR CSNDDSG ICSF RESULT Could not get certificate token by label Could not get record token by label Could not get RSA factor information Could not allocate certificate token Could not get record by id Could not get RSA factor information Could not open key ring Function getCertificateTokenByLabel failed Function getCertificateTokenByld failed Could not decode certificate subject name Function getCertificateTokenBySubj
94. 099P tabname List of names of the available codetranslation tables The first two tables are standard tables ASCll lt gt EBCDIC with German character sets SODTA2E and ODTE2A are the translation tables for OFTP transmission with FORMAT TEXT tabname is the first name of the external user defined translation tables See also DD statement TRNTABLES in rvs start job DF1171E F sid UN ALLOCATION ERROR xxxx yyyy FOR dsn An error occurred during allocation or unallocation of a data set DYNALLOC macro returned with errorcode xxxx and infocode yyyy The codes are described in OS VS2 MVS SPL Job Management DATASET ALLOCATED TO ANOTHER JOB REQUESTED UNIT NOT AVAILABLE VOLUME xxxxxx NOT MOUNTED DF1172E F sid REQUESTED UNIT yyyyyyyyy UNDEFINED VOLUME xxxxxx NOT AVAILABLE DS ALREADY EXISTING ON VOLUME xxxxxx ALL VOLUMES OF UNIT yyyyyyyy OCCUPIED This message is always issued in relation with msg DF1171E and shows a short explanation of the DYNALLOC macro return code XXXXXX volume number yyyyyyyy unit number REQUEST BLOCK DF1173P F sid acme sessid TEXT POINTERS b ADDR xxxxxxxx TEXT UNIT unitname J rvsMVS Messages and Codes 5 rvs Messages DF1173P DF1175E DF1176P DF1190P DF1199P DF1191W DF1191W DF1191E DF1191E DF1192W This message is issued in case of a dynamic allocation error It will display the contents of the used SVC 99 parameter list allocation request
95. 27P DF8328I ODETTE TASK NOT RESPONDING WILL BE CANCELLED S SID This message is issued by the rvs TCP IP task when the ODETTE task is not responging any more It will be detached MAX LENGTH FOR READ EXCEEDED REDUCED TO 32767 This message is issued by the rvs TCP IP task when a read macro is to be issued The length of the expected data as indicated in the 4 byte header field exceeds the maximum value of 32767 It will be reduced to this max value SEND ISSUED S L DATAS This message is issued by the rvs TCP IP after a write macro has been issued The message displays the remote station socket number datalength and the first 4 bytes of the sent data ODETTE TASK EOT ECB POSTED SOCKET SID This message is issued by the rvs TCP IP task when the ODETTE task EOT ECB has been posted SEND DATA FLUSHED DUE TO LOCKED SERVER QUEUE s This message is issued by the rvs TCP IP task when data to be sent to the ODETTE file transfer protocol task was rejected due to a locked server queue ie The task was not ready to accept the request The message displays the related socket number A 2272222222222 PHH HHH HEE HHH P IBIEHIE This message is issued by the rvs TCP IP task when a connection is to be initiated This message displays IP address and port number of the remote station and of the own station as well OPTION ALL NOT SUPPORTED BY THIS COMMAND Thi
96. 3E DF9464E DF94651I DF94661 DF9467P DF9468P This message is issued when the dataset with the same name and the same queuing date time was already sent Z ORT ACCM SESSONID DATASET WITH SAME QUEUING DATE TIME ALREADY RECEIVED Z ORT ACCM SESSONID DATASET ALREADY EXISTS NO REPLACE This message is issued to explain the cause of the duplicate file condition F Men ue aui qM M MR M ERROR RETRIES REACHED FOR This message is issued by the Odette File Transfer Protocal task when the maximum allowed limit of transfer retries has been reached The OFTP session will be closed F ORT ACCM SESSID WAITING FOR RDS TASK This message is issued when command DS has been entered and the OFTP task is currently waiting for an answer from the RDS task DF052X F ORT ACCM SESSID NERP FOR NOT SENT BECAUSE OF LOW OFTP VERSION This message is issued when a NERP negative end to end response is not sent because the neighbour doesn t support OFTP version 1 4 or higher F ORT ACCM SESSID CREATOR REASON This message is issued when a NERP negative end to end response is received It contains who is the creator of the NERP and what was the reason code and description 03 gt ESID received with reason code 03 user code not known 04 gt ESID received with reason code 04 invalid password 09 gt ESID received with reason code 99 unspecified reason 11 gt SFNA RETRYZN received with reas
97. 4P The execution of ENQ DEQ macros is listed on printout During selection of a data set for transmission to station sid rvs checks whether the selected data set is just sent on another line or session or not This is done to avoid parallel transmission of the same data set to the same station S sid mn DEQ HAVE RETURNCODE xx DSN dsname See description of message DF1603P rvsMVS Messages and Codes 5 rvs Messages This page will be intentionally empty rvsMVS Messages and Codes 5 rvs Messages Messages of Initialization of GENERAL PARAMETER LIST DF19001 DF1901I DF1902E DF1903W DF1904E DF1904E DF1904E DF1905E PROCESSING OF START PARAMETERS STARTED This message is displayed when rvs begins processing of the rvs start parameters specified in rvs TABLES CNTL CONTROL STATEMENT text This message displays the rvs start parameters specified in rvs TABLES CNTL It is possible to enter lines with a maximum of 72 bytes to specify the rvs start parameters For a description of these parameters see rvsMVS Installations Manual chapter 6 ERROR NEAR PARAMETER parm Identification of the parameter parm is in error VOLUME AND UNIT PARAMETER SPECIFIED UNIT PARAMETER IGNORED The rvs start parameters VOLUME is exclusive with the UNIT parameter see rvsMVS Installations Manual This message is issued to indicate that the UNIT parameter will be ignored INCOMPLETE PARAME
98. 510A D sid dsname QD yyddd QT hhmmsst ENTER DEL OR NO OR END After input of the D sid command the first entry for which the selection criteria are valid is indicated For send or receive entries the data set name and the volume number are displayed For end to end responses the data set name and the queuing date and time are displayed The following replies are possible DEL Entry is to be deleted NO The next entry is to be indicated END Request will be cancelled DF2520I D sid REQUESTED ENTRY DELETED The requested entry has been deleted after input of DEL in the response to DF2510A DF2525I D sid REQUESTED ENTRIES DELETED The requested entries have been deleted after input of DEL as response to DF2590A DF2530E D sid NO MORE ENTRIES FOUND No entry or no further entry after input of NO in response to DF2510A was found in the control data set The D sid command may have been incorrectly entered DF2531E D sid NO ENTRIES FOUND No entry was found in the control data set for D sid command DF2540A D sid IS THE DATA SET TO BE SCRATCHED FROM DISK YES OR NO If the data set to be transmitted is on disk the operator is provided with the possibility of physically scratching the data set from disk after message DF2520l Possible replies are YES The data set is to be scratched NO The data set is not to be scratched DF2550I D sid DATA SET NOT SCRATCHED RC xx yy REQUEST CANCELLED Af
99. 53K CRYPT INIT FAILED IN LIST ALL KERNIE DF053K CRYPT END FAILED IN LIST ALL KERNIE DF053K CRYPT INIT FAILED IN LIST KEY KERNIE DF053K COULD NOT CLEANUP KEY IN LIST KEY KERNIE DF053K COULD NOT CLEANUP CERT IN LIST KEY KERNIE DF053K CRYPT END FAILED IN LIST KEY KERNIE P15KEYST CANNOT OPEN ZERO KEYSTORE POINTER KERNIE P15KEYST NO MEMORY TO BUILD KEYSTORE KERNIE P15KEYST MISSING PASSWORD KERNIE P15KEYST NO MEMORY TO STORE PASSWORD KERNIE P15KEYST COULD NOT OPEN KEYSTORE KERNIE P15KEYST CANNOT CLOSE ZERO KEYSTORE POINTER KERNIE P15KEYST ERROR DURRING CLOSE KEYSTORE KERNIE P15KEYST ZERO KEYSTORE POINTER IN GET KEYSET The keystore already contains a certificate with the same issuer name and serial number but a different index Please check your configuration and try again Couldn t cleanup memory after execution Read the cryptlib error code for more information Couldn t end the security framework Read the cryptlib error code for more information Couldn t initialize the security framework Read the cryptlib error code for more information Couldn t cleanup memory after execution Read the cryptlib error code for more information Couldn t end the security framework Read the cryptlib error code for more information Couldn t initialize the security framework Read the cryptlib error code for more information Couldn t end t
100. 60 PMSG 57 Trace 28 Dispatcher 88 89 91 92 93 94 95 Parameter 57 88 89 Dispatcher Task 88 FT Receive Control Task 130 FTP 9 10 28 79 80 128 130 131 132 133 134 136 140 141 142 143 144 146 147 160 179 183 FTP Driver Task 140 FTP Polling Task 136 Genaral Parameter List 38 LU 6 2 27 44 47 54 59 82 89 91 94 137 184 186 189 LU6 2 Control Task 184 194 207 Monitor 7 12 48 51 58 68 82 ODETTE FTP 160 Receive Dispatcher Task 100 Send Dispatcher 96 Parameter 96 Send Dispatcher Task 96 Station table 42 TCP 59 120 121 122 123 124 125 126 127 VTAM Control Task 150 VTAM Session Handler 192 X 25 Control Task 172 180 X25 38 44 53 54 55 57 58 59 165 210 215 216
101. 6302I DF6303I The command DIAL sid has been entered But none of the line s defined for station sid is defined as an autodial line within the rvs stations table As a result of this the dial request will be ignored PREVIOUS DIAL COMMAND NOT YET PROCESSED The command DIAL sid has been entered But a previous command DIAL sid for the same station sid is not yet processed Only one dial request for a certain station may be specified at one time The additional dial request will be ignored DIAL COMMAND IGNORED The command DIAL sid has been entered But this command will be ignored This message is always preceeded by an additional message which indicates the reason for this STATION sid WILL BE CALLED ON LINE 111 The command DIAL sid has been entered This message indicates that this command has been accepted Automatic dialing to station sid on line III will be initiated in the next time see DIAL command within rvsMVS Operations Manual for more details DIALNUMBER MISSING FOR STATION sid The command DIAL sid has been entered But the definition of the station sid within the rvs stations table does not include the DIALNUM parameter which is mandatory for autodial The dial request will be ignored LINE 111 NOT DEFINED FOR STATION sid The command DIAL sid lll has been entered But there is no entry for station sid within the rvs stations table which includes the subchannel number IIl The dial reques
102. ADY FOR TRANSMISSION TRANSMISSION IN PROGRESS TRANSMISSION COMPLETE OR ABENDED NOT READY reason For status NOT READY an additional self explaining information about the reason is displayed DD sid ODyyddd QThhmmss ccppx sSsid name a DD sidz ekekekekkmdeeeeeeek o END OF INTERNAL KD FILE b DD sidz kkckkkkkkkk END OF EXTERNAL KD FILE c DD sid 2 klkk kxkkkko kkkkkk INTERNAL KD EMPTY d rvsMVS Messages and Codes 5 rvs Messages DD sid xkkkkk kkkkkkkk kkkkkk EXTERNAL KD EMPTY e DD sid x xkkkk kkkkkkkk KKKKKK BAD DD COMMAND x DD sidz z x k kkdkkkkk KKKKKK SID NOT FOUND g DD sidz kckk k kkkkk STD FOUND SYNTAX ERROR h DD sidz ck kkkkkk INCORRECT FILE NAME i DD sidz kkckkkkkkkk INT KD NO ENTRY FOUND j DD sidz kkckkkkkkkk EXT KD NO ENTRY FOUND k This message one or more is a reply for DD command for DD sid or DD command for DD ACT command for DD ALL command day of queuing dataset time of queuing dataset day of starting dataset time of starting dataset cc may be external KD dataset only DD sid E command sid may be sid name ACT ALL QDyydad QThhmmss SDyydad SThhmmss E 1 E2 E3 EA E5 E6 E7 E8 E9 EA EB Or pp x IS s may be A U D Messag
103. B with the application identifier applid has been sucessfully opened SETLOGON ISSUED After starting the rvs VTAM control task the SETLOGON macro has been successfully completed rvs VTAM CONTROL TASK READY The rvs control task has been started successfully Now it is possible to enter VTAM specific rvs commands in order to activate or to deactivate sessions with other stations or to get status information about existing sessions scrip LOGON b EXIT ENTERED INsExiT LosTTERM J The Activation of a VTAM exit is indicated OPEN ACB FAILED APPLID applid RC xx ERROR x yy After starting the VTAM control task the ACB with the application name applid could not be opened To analyse the return code xx and the error code yy see Advanced Communications Function for VTAM Programming APPLID NOT STARTED The ACB could not be opened because the SYS1 VTAMLST data set contains no APPL statement for this application or this statement has not been activated SETLOGON FAILED RC xx yy FDBK zz After starting the VTAM control task the execution of the SETLOGON macro failed For a description of return code xx register 15 yy register 0 and feedback code zz see Advanced Communications Function for VTAM Programming rvsMVS Messages and Codes 5 rvs Messages DF90101I DF9011E DF9012E DF9013E DF9013E DF9014E DF9015E DF9016P DF9017E DF9018E DF9019E f sid mn SESSION C
104. BEND SID DSN name DF9484P Z ORT ACCM SESSID ACTIVE ONL TASK HAS BEEN DETACHED SESSION DF9485P Z ORT ACCM SESSID used user separation USP sibcousp DF9486P Z ORT ACCM SESSID used user separation USP siboousp DF9487P Z ORT ACCM SESSID used user separation USP sibpousp Messages DF9471P until DF9487P are for error detection only They are not in effect for users purpose DF9488P Z ORT ACCM SESSID SEND REQUEST CANCELLED DUE TO STARTPARM gt DELSREQ lt This message is issued by the Odette File Transfer Protocol Task if a send request is canceld DF9489P Z ORT ACCM SESSID DEST DSN This message is issued as additional message to DF9488P DF9470E DF9490P Z ORT ACCM SESSID 2 2 2 2 2 Messages DF9490P is for error detection only They are not in effect for users purpose DF9492P Z ORT ACCM SESSID RESTART COUNT EXCEEDS MAXIXMUM NUMBER OF 15 DIGITS An SFID has been received OFTP 2 0 The SFID includes a restart count with more than 15 digits RVSMVS doesn t support restart counts with more than 15 digits The transmission will be rejected with reason code 06 FILE SIZE TOO BIG DF9496P Z ORT ACCM SESSID HEADER RECORD 17777777 DF9498P Z ORT ACCM SESSID 2 2 DF9499P T ORT ACCM SESSID 17 Messages DF9496P until DF9499P are for error detection only They ar
105. BHHEE the ERRNO XX 7772 7 7 0 2 7 7 7 7 7 7 7 7 77 777 7 7 7 77 77 77 77 This message shows a description of the ERRNO of message DFV309E XX decryption task number rvsMVS Messages and Codes 5 rvs Messages DFV312E DFV313E DFV314E DFV315E DFV316E DFV317E DFV340E DFV350E This message is issued if a code translation table was configured but could not be found XX decryption task number 22222222 a the used code translationtable XX REMOTE STATION ID NOT FOUND IN STATION TABLE This message is issued if the station ID for which the decryption was started could not be found in station table XX decryption task number the station ID XX CRYPTLIB ERROR NUMBER DEC This message is issued if the decryption function has failed XX decryption task number THHHHHHHE internal error number of the security function library cryptlib For more information refer description of cryptlib error numbers XX 7 72 7 7 2 2 27 77 77 7 7 27 77 77 77 7 7 7 7 77 77 This message shows a description of the error number of message DFV313E XX decryption task number XX RECEIVE REQUEST NO LONGER AVAILABLE PROCESSING STOPPED This is issued if a decryption was started but the corresponding record is not longer available in the control dataset Probably it was already processed by another task XX decryption task number XX COULD NOT ALLO
106. C TYPE OF REQUEST rr rvsMVS Messages and Codes 5 rvs Messages This message has been introduced for reasons of performance measurement It will be displayed if the difference of the time before issuing ENQ or RESERVE and after execution of DEQ done for serialization of the rvs Controldataset exceeds at least 2 seconds nnn denotes the time value in seconds hh denotes the value in 1 100 sec rr denotes the typy of request access to the rvs Controldataset For rr the following values are valid 00 OPEN PROCESSING MAY INCLUDE DYNAMIC ALLOCATION 04 INSERT OF A RECORD 16 UPDATE OF A RECORD KEY OF RECORD NOT CHANGED 20 UPDATE OF A RECORD KEY OF RECORD CHANGED 24 DELETE RECORD 28 CLOSE PROCESSING MAY INCLUDE UNALLOCATION 44 SEQUENTIAL READ OF RECORDS DF5408E USER ABEND 0540 REASON XX DEC OCCURED An error record occurred during access to the rvs control record A MODCB GENCB or SHOWCB macro could not be exexcuted DF5409E USER ABEND 0550 REASON XX DEC OCCURED An error record occurred during access to the rvs control record A record was found in the control dataset that could not be decompressed Please use program DF144A to find and delete the incorect record s Messages DF5410E until DF5411P are for possible error detection only They are not in effect for users purpose DF5410E INVALID RECORD XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX DF5411P text DF5412I RVSMVS STOPPED NOT ENOUGTH SPACE IN LOG
107. CATE OUTPUT DATASET This message is issued if the allocation of the output dataset failed XX decryption task number XX UNALLOCATION ERROR This message is issued if the unallocation of the output dataset failed XX decryption task number XX 9 727 7 2 7 77 77 7 7 7 7 2 2 2 7 777 7 7 72 77 77 77 7 7 X This message is issued if a HSM PKCS 11 Interface error occurs Detailed description see below HSM PKCS 11 error codes XX encryption task number XX 7 772 7 7 7 77 77 7 7 7 2 2 7 777 7 7 7 77 77 7 7 7 X rvsMVS Messages and Codes 5 rvs Messages DFV360E DFV370E 2 72 7 7 0 0 7 77 77 7 7 2 2 27 777 7 7 2 2 2 2 2 27 777 77 7 7 7 77 77 7 This message is issued if a ICSF error occurs You get information about returncode and reason XX encryption task number XX 727 7 2 7 77 77 7 7 7 2 2 7 777 7 2 2 2 27 77 7 7 7 7 7 X This message is issued if a GSK Global Security Kit error occurs You get information about the status of this call XX encryption task number XX 72 72 0 7 77 77 7 7 7 2 2 7 777 7 2 2 27 77 7 7 7 7 X This message is issued if a PKCS 11 IF error occurs You get information about the error according PKCS 1 1error values rvsMVS Messages and Codes 5 rvs Messages Messages of the SNMP Trap Mng Task DF031D DFD101P DFD102P DFD043P DFD044P DFD045P DFD046P DFD047P DFD048W
108. D Refresh of the of the station records whithin the rvs control dataset is just executed by another rvs monitor whithin the installation In this case a second parallel refresh is not executed DF3301I f sid NO DATA SET dsname QUEUED In the commands H sid or S sid a data set with the name dsname was specified for which no transmit request has been stored DF3302I S sid ENTER VOLUME NO OF DATA SET TO BE RETRANSMITTED OR END After entry of the command S sid name the operator is asked for the volume number DF3303I f sid NO ENTRY dsname volume PROCESSED This message is a response to the command S sid An entry of control data set assigned to the data set dsname on volume volume could not be changed because such an entry could not be found DF3304I COMMAND F ALL COMPLETED This message is a response to one of the commands S ALL or H ALL These commands may be used to set all send requests into hold state H ALL or to release all send requests from the hold state S ALL rvsMVS Messages and Codes 5 rvs Messages DF3305I DF3306E DF3307P DF3308P DF3309P DF3400I DF3401A DF3402E DF3405E f sid DATASET dsname ALREADY TRANSMITTED This message indicates that the file dsname has already been successfully transmitted and the remote station has sent a response back in order to inform the sender about the successful file transfer A retransmission of this file is not possible
109. DEQ processing and show that DEQ request ended with return code not 0 Report this message to system programmer S sid acme nm CURRENT SCT ENTRY NOT ASSIGNED WITH AN ACTIVE SESSION This message indicates that a send request is to be assigned released for a session but the session has already terminated The send request will be released in each case If a send request should be assigned to a session selection of a send request the transmission will be restarted automatically when a new session to the remote station sid has been established S sid acme nm SCT STATION ENTRY POINTER NOT AVAILABLE Similar situation as described for message DF5237P the session is not ready for transmission e g session termination because of line problems S sid acme nm STATION POINTER OF SCT ENTRY HAS CHANGED Similar situation as described for message DF5235P S sid acme nm SEND REQUEST AVAILABLE This message appears only within the rvs protocol for internal use only Dispatcher trace command T DISP It indicates that selection of a send request for send session nm to station sid and access method acme has been successfully ended send request is found S sid acme nm NOTHING TO SEND This message appears only within the rvs protocol for internal use only Dispatcher trace command T DISP It indicates that selection of a send request for send session nm to station sid and access method acme has ended but
110. DF2203W DF2204W DF2205E DF2206E DF2207E DF2208W DF2209E PROCESSING OF STATION TABLE STARTED First message of program DF022B Processing of the Station Table allocated under DD Name STATIONS started WARNING INVALID KEYWORD AT ENTRY IGNORED A keyword of the mentioned station entry could not be recognized WARNING INVALID PARMVALUE AT ENTRY DEFAULT VALUE SET The specified parameter could not be recognized The default value has been set WARNING INVALID PARMVALUE AT ENTRY NO DEFAULT The specified parameter could not be recognized A default value could not be set ERROR RELAIS ENTRY NOT FOUND 222 2 IND ENTRY FOR IGNORED The Indirect Station Entry see Installation Manual chapter 6 2 1 has been ignored because a entry of the mentioned relay station has not been found ERROR RELAIS PARM MISSING gt IND ENTRY FOR IGNORED U The Indirect Station Entry see Installation Manual chapter 6 2 1 has been ignored because no relay station has been specified ERROR PPROF MISSING gt IND ENTRY FOR LINE IGNORED U The mentioned Line Entry has been ignored because the program profile parameter has not been specified WARNING DIAL NUMBER MISSING gt AUTO DIAL FOR NOT POSSIBLE U Autodial is requested for this station but the dialnumber has not been specified PROCESSING OF STATIONS TABLE FAILED PROGRAM
111. E HSMUTIL ERR FUNC GSK NAME COMPARE HSMUTIL ERR FUNC GSK GENERATE RANDOM BYTES HSMUTIL ERR FUNC GSK GET RECORD BY ID Messages of the License Module DF018X DFX803P DFX804P DFX805P DFX806E ICSF function CSNDDSG failed RESULT Could not get random value Could not load GSK Global Security Kit DLL Could not get GSK function open key ring Could not get GSK function cloase database Could not get GSK function open key ring Could not get GSK function Could not get GSK function Could not get GSK function Could not get GSK function Could not get GSK function Could not get GSK function Could not get GSK function Could not get GSK function Could not get GSK function Could not get GSK function Could not get GSK function Could not get GSK function 7 7 2 2 7 77 7 7 7 7 2 2 7 77 777 7 7 77 77 7 7 This message shows the expiration information e YOU ARE USING A NO EXPIRE LICENSE KEY e YOUR RVSMVS LICENSE EXPIRES IN d DAYS 7 7 0 7 77 7 7 7 2 2 77 777 7 7 7 7 77 77 7 7 7 This message shows license check start information e LICENSE CHECK HAS BEEN STARTED e LICENSE WATCHDOG HAS BEEN STARTED 7 7 0 27 77 77 7 7 7 2 7 77 777 7 7 7 77 77 7 7 This message shows license check finish information e LICENSE CHECK FAILED 96d e LICENSE WATCHDOG HAS FINISHED dddd 7 7 7 0 0 2 7 77 7 7 7 7
112. E SOCKET FAILED ERROR ERRNO This message is issued when close fails This message is issued when Get Host by Name fails XX GETHOST BY NAME RETURNED FOR LOCAL SOCKET This message is issued when Get Host by Name succeeded for own name XX SNMPE TRAP MNG TASK STARTED DF031X TASK This message is issued when the Subtask was started XX SNMPE TRAP MNG TASK STOPED DF031X TASK This message is issued when the Subtask is stopped XX SNMPE TRAP MNG TASK CANCELED DF031X TASK This message is issued when the Subtask is canceled rvsMVS Messages and Codes 5 rvs Messages DFE146P DFE147P DFE148P DFE149P DFE150P DFE151P DFE152P XX SNMPE TRAP MNG TASK BREAKING DF031X TASK This message is issued when the Subtask is stopped with break XX SNMPE TRAP MNG TASK DETACHED DF031X TASK This message is issued when the Subtask has detached XX SNMPE TRAP MNG TASK STOPED DF031Z TASK This message is issued when the Subtask is stopped XX SNMPE TRAP MNG TASK CANCELED DF031Z TASK This message is issued when the Subtask is canceled XX SNMPE TRAP MNG TASK BREAKING DF031Z TASK This message is issued when the Subtask is stopped with break XX SNMPE TRAP MNG TASK DETACHED DF031Z TASK This message is issued when the Subtask has detached XX SNMPE TRAP MNG TASK STARTED DF031Z TASK This message is issued when the Subtask was started rvsMVS Messages and Codes 5 rvs Messages
113. E rc FOR dsn This message is issued when a file with virtual filename dsn is to be received from station sid and the serialization function failed The transmission will be rejected ENQ returncode 04 indicates that a file with same virtual filename and same queuing date and time is just received from station sid on a parallel session R sid ACCM SESSID INV ERP DATA RECVD ORIG oidl DEST oid2 This message is issued when an EERP NERP protocol unit has been received and the verification of the EERP NERP failed The EERP NERP data Odette lds of originator and destination virtual file name date and time are listed in this message The EERP NERP is accepted but will not be further processed by rvs rvsMVS Messages and Codes 5 rvs Messages DF9450I DF9451I DF9452I DF9453I DF9454P DF9455I DF9456P DF9457E DF9458I DF9459E Z ORT ACCM SESSONID NONZERO RETURNCODE BY name USER EXIT This message is issued by the Odette File Transfer Protocol Task if the USER EXIT has a nonzero returncode This message is issued when the filename includes characters which don t match with OFTP character subset ISO 646 In the message is shown virtuell filename of the dataset This message is issued when the received filename includes characters which don t match with OFTP character subset ISO 646 In the message is shown virtuell filename of the dataset SFIDDSN Z ORT ACCM SESSONID RELATED SFIDDSN dsn QD qdate
114. ER The FTP Server Task issues this message when sending of FTP Trailer control file is closed DF8551P D sid sesid END TO END RESPONSE RECEIVED DSN dsn The FTP Server Task issues this message when an End to End Response EEID protocol unit is received In case of errors additional messages DF8552W and DF8553Z will be given DF8552W D sid sesid UNKNOWN EEID RECEIVED DSN dsn The FTP Server Task issues this message when an End to End Response EEID protocol unit is received but the EEID can not be associated with a previous file transfer In the message is shown the file name indicated in the EEID protocol unit DF8553Z D sid sesid EEIDDATE The FTP Server Task issues this message when an End to End Response EEID protocol unit is received but the EEID can not be associated with a previous file transfer The message shows the received data in the EEID protocol unit starting from the date information DF8561I D sid sesid FTP message DF8562E D sid sesid UNEXPECTED END OF FTP OUTPUT FILE DF8563E D sid sesid FTP CONNECTION REJECTED 7 DF8564E D sid sesid FTP SESSION REJECTED DF8565E D sid sesid TRANSMISSION CANCELED DF8566E D sid sesid FTP FUNCTION ERROR DF8568P D sid sesid VERIFY FTP RETURNCODE nnnn The FTP Server Task issues these messages by checking FTP output file Appropriate set of messages DF8560E DF8568E show corrected or not corrected flow FTP
115. ERMINATION OF rvs X 25 CTCP IN PROGRESS This message is issued by the rvs X 25 CTCP task when an activate command has been entered but termination of the rvs X 25 CTCP task has already started nn STATION ENTRY NOT ASSIGNED NO PAD DEFAULTS SET This message is issued by the rvs X 25 CTCP task when a connection with a PAD stations is to be established rvs tries to reset the PAD parameters to defaults as defined in the rvs stations table In this case the assignment did not exist so the station definitions could not be used nn CALL RECEIVED X 25 DTE NO 4HHHHHHBEEEEEUG E This message is issued by the rvs X 25 CTCP task when an X 25 call packet is received The message shows the X 25 DTE number of the caller nn INVALID CALL PACKET RECEIVED LENGTH OF DTE NO EQUAL ZERO This message is issued by the rvs X 25 CTCP task when an invalid X 25 call packet is received The length of the calling DTE number is equal to zero rvsMVS Messages and Codes 5 rvs Messages DF9543P DF9544P DF9545P DF9546P DF9547P DF9548P DF9549P DF9550E DF9551E DF9552I This message is issued by the rvs X 25 CTCP task when an X 25 clear packet has been sent to the remote station nn ODETTE TASK HAS BEEN POSTED SESSION This message is issued by the rvs X 25 CTCP task when the ODETTE task has been posted for termination nn ODETTE TASK HAS BEEN DETACHED SESSION This message is issued b
116. EST S sid acme nm lUNSUCCESSFUL END SELECTION OF SEND REQUEST This message appears only within the rvs protocol for internal use only Dispatcher trace command T DISP It indicates that selection of a send request for send session nm to station sid and access method acme has ended S sid acme nm POINTER TO KDRECORD AREA NOT AVAILABLE This message indicates that the process of selecting a send request for transmission cannot be continued because the session for the transmission is not ready e g session termination because of line problems The transmission will be restarted automatically when a new session to the remote station sid has been established S sid acme nm sSsid name a DISPATCHER POSTED TASK POSTCODE 4 b DISPATCHER POSTED TASK POSTCODE 8 c This message appears only within the rvs protocol for internal use only Dispatcher trace command T DISP Message a is displayed during selection of next send request and show kdrecord contents KDrecords are show in sequence in internal KD dataset s may be A for active entry U for used entry transmission in progress D for completed entry transmission is finish Message b is displayed during DEQ processing and show that DEQ request ended with return code 0 rvsMVS Messages and Codes 5 rvs Messages DF5237P DF5238P DF5239P DF5243P DF5245P DF5246P DF5248P Message c is displayed during
117. F RECV REQUESTS REFRESHED Status message about refresh of the receive entry list DF5X10P NEW RECV DISP REQUESTS SELECTION Start of a new selection cycle for the receive entry list DF5X11I SDDDDDD STTTTTTT ASSID 12345678901234567890123456789012345678901234 This message one or more is a reply for DD command SDDDDDD day of queuing dataset STTTTTTT time of queuing dataset 123 data set name DF5X22P 123456789012345678901234567890123456789012345678901234567890 The following text may be First 54 characters of KD record MAX NUMBER OF RDS TASK EXCEDED ATTACH FAILED DF052V ATTACHED RDS STOP RDS CANCEL WAITING RDS TASK ACTIVE TASK ACTIVE NO ACTIVE RDS TASKS RECORD DONE IGNORED RECORD IN HOLD STATE IGNORED TASK WITH KD RECORD ACTIVE kkkk RDS BUILD kkkk QUEUE ELEMENT FOUND NO RECV REQESTS FOUND rvsMVS Messages and Codes 5 rvs Messages DF5X25P DF5X27I DF5X99P DF5401P DF5402P DF5402W DF5403I DF5404I DF5405E DF54061I DF5407I All message are protocol messages only NO STATION TABLE FOR SID The Receive Dispatcher detects an error The record can not processed RDS TASK COULD NOT BE STARTED NOT ENOUGH MEMORY This message is issued by Receive Dispatcher task when activation of further subtask is rejected because of storage s
118. F2239W DF2240W DF2241W DF22421 ERROR FTPUID PARAMETER IS MISSING gt ENTRY FOR SID IGNORED For using the FTP component the FTPUID parameter is mandatory ERROR FTPPREF PARAMETER IS MISSING gt ENTRY FOR SID IGNORED For using the FTP component the FTPPREF parameter is mandatory ERROR TOO MANY STATION TABLE ENTRIES YOUR LICENCE ALLOWS ONLY ENTRIES gt rvsMVS INSTALLATION NOT COMPLETE The current licence doesn t cover the number of stations rvsMVS does not work ERROR FTPPASS PARAMETER IS MISSING gt ENTRY FOR SID IGNORED For using the FTP component the FTPPASS parameter is mandatory REFRESH OF KD STATIONS RECORDS ALREADY ACTIVE NOT EXECUTED The command REFR STAT is already active The next command REFR STAT ignored WARNING GZIP COMPRESSION ONLY SUPPORTED FOR ACCESS METHODS X25 LU62 TCP IGNORED FOR SID XXX The GZIP compression parameter COMPRESS GZIP found in station entry for SID xxx but the GZIP compression is available only for access method X25 LU62 and TCPIP The parameter is ignored WARNING GZIP COMPRESSION NOT INCLUDED IN CURRENT LICENCE KEY IGNORED FOR SID XXX The GZIP compression parameter COMPRESS GZIP found in station entry for SID xxx but the GZIP compression is not included in current licence key The parameter is ignored WARNING EXTERNAL SECURITY NOT INCLUDED IN CURRENT LICENCE KEY IGNORED FOR SID XXX The external security parameter SECURI
119. F3020I f sid nnn REMOTE STATION IS NOT READY This line has probably not been activated at the remote station However there can also have been a modem or a line failure DF3021I f sid nnn LINE CONTROL TERMINATED SYSTEM sss USER uuu The line control task for station sid and line nnn has terminated with system completion code sss or user code uuu see DF03011 VTAM nn TCP DF3022I nn X25 SUBTASK ENDED SYSTEM sss USER uu LU62 RMOP The rvs VTAM TCP X25 LU62 RMOP subtask ended nn states the CTCP number X 25 or the stack number TCP IP assigned with the terminated subtask If the end of the subtask was not normally either a system completion code sss has occurred or the subtask has been terminated with one of the following user return codes uu 00 normal end 04 error during CLOSE of the VTAM X25 RMOP ACB 08 error during OPEN of the VTAM X25 RMOP ACB 12 error during SETLOGON processing 16 rvs Session Table missing In all cases of a nonzero returncode additional error information is displayed before this message appears DF3023I DISPATCHER SUBTASK ENDED SYSTEM sss USER uuuu The message indicates termination the dispatcher subtask for one of the following reasons e the command P rvs has been entered stop of monitor e the command P DSP has been entered stop of dispatcher e an error system completion code sss hex or user completion code uuuu dec has occu
120. FI rvsMVS Messages and Codes 5 rvs Messages Not identifiable Not supported Invalid P S Invalid P R Invalid D bit received Invalid Q bit received No LU MCH session active for GATE DATE Abend 0703 in progress Host negative response or cancel chain command PCNE negative response with D bit PCNE SHUTC status XIO disable Unauthorized interrupt confirmation Unauthorized interrupt request PCNE error RESET sent to PAD for SIGNAL Resources general In state P1 incoming call received slowdown in progress PIU too long Local procedure error general Packet received with LC not equal to 0 Restart or diagnostic packet received with LC not equal to 0 In state P1 incoming call received and not available for ic Facility not subscribed Invalid packet for LC equal to 0 In state P1 incoming call received with inv facility field Facility not supported Unexpected calling DTE Invalid D bit request Reset indication on virtual call Invalid protocol identifier Connection identifier mismatch Remote procedure error general 5 2 3 Diagnostic Codes from the network The following section is an extract of the DATEX P Handbuch of the german Deutsche Telekom Fehlerhaftes Q Bit Einzelpaket nicht vereinbart Feld des Grundes ungleich 00 hex Nicht vertragliche Paketlange R ckweisung der Verbindu
121. FOR LU lu The session mn to the logical unit lu terminated DF9905P R sid mn TRACE STOPPED ALLOCATION ERROR The trace for session mn to station sid has been stopped by the rvs monitor because the output data set for this trace could not be allocated DF9906P R sid mn BINDAREA bindarea rvsMVS Messages and Codes 5 rvs Messages DF9909P DF9910E DF9911E DF9915P DF9916E DF9917E DF9918E The BIND parameter used by establishing session mn to station sid are listed R sid mn SESSION NOT YET ESTABLISHED TRY LATER One of the commands M sid Q sid or R sid has been entered The execution of these commands requires an active operator session to station sid The activation of the operator session has been already initialized i e by using the command A sid O but the session could not be established The entered command will be ignored and can be entered again after activation of the operator session R sid mn SESSION COULD NOT BE ESTABLISHED The requested session could not be established no response to a BIND request NoT FOUND R sid mn LU luname NOT ACTIVE XX yy SSSS REJECTED The connection to the logical unit luname could not be established For a description of return code xx feedback code yy and system sense code ssss see Advanced Communication Function for VTAM Programming NOT FOUND a logical unit this name is not defined NOT ACTIVE the logical unit is
122. IND FAILED RETCODE rc REASON rs HEX Error message in case of a failed FIND macro execution A FIND macro is used to locate a member in a partitioned dataset PDS Returncode rc and Reason code rs of the FIND macro are displayed in this message For details see the IBM manual DFSMS Macro Instructions for Datasets F ORT JOBSUBMIT IGNORED BECAUSE OF INVALID DCB ATTRIBUTES Error message about an ignored job submit It is assumed that jobdatasets have fixed length records with a record length of 80 If this is not the case the job submit will be rejected by rvs JOB SUBMIT INITIALIZATION FAILED CREATION ACB RPL Error message in case of failed initialization of job submit function of rvs The job submit function of rvs cannot be used if this error has occured during start of rvs MAX a USE b INS c SUB d RES e T1 tl1 T2 t2 This message is displayed as a response to command DS JDSLIST ALL It shows some values concerning the jobdataset cache a maximum number of datasets within cache list b number of jobdatasets currently included in cache list c total number of inserts of jobdatasets into cache list since start of monitor d total number of job submits since start of monitor e number of executed reset commands for cache list t1 time of first job submit since start of monitor rvsMVS Messages and Codes 5 rvs Messages t2 time of first removal of a jobdataset from cache list since start
123. M length Should not occur error This ABEND is coded in the program DF076Axx An invalid keyword has been specified in the PARM string This ABEND is coded in the program DFO76Axx No entry specified in PARM string This ABEND is coded in the program DF076Axx Invalid data set name specification rvsMVS Messages and Codes 3 rvs Abend Codes 765 2FD This ABEND is coded in the program DF076Axx Invalid station id specification 766 2FE This ABEND is coded in the program DF076Axx Invalid record type specification 771 303 This ABEND is coded in the program DF077Oxx The data set assigned to the SYSPRINT DD statement could not be opened 772 304 This ABEND is coded in the program DF077Cxx The load of the module DF067A was not successful DF067A contains the names of the data sets which are to be allocated dynamically 773 305 This ABEND is coded in the program DF077Cxx No jobs PDS specified in the dynamic allocation module DF067A This PDS contains data set related JOB s which are to be started after reception in order to process these data sets In later rvs releases since rvs OS Release 3 2 it is also possible to specify Partitioned Data Sets in the resident receive entries 774 306 This ABEND is coded in the program DF077Cxx The module DFO67A contains no valid dsname entry for a PDS containing JOB s to process the received data sets 840 348 An error occurred during access to the rvs Log Data Set USP User Separ
124. MAND This message is issued by the rvs XOT CTCP task when the option ALL has been used for a command that does not support the ALL option nn INVALID COMMAND PARAMETER This message is issued by the rvs XOT CTCP task when an invalid parameter for a command was detected nn SPECIFIED STATION This message is issued by the rvs XOT CTCP task when a trace start stop pending nn SPECIFIED STATION rvsMVS Messages and Codes 5 rvs Messages DF9I29I DF9IS3O0I DF9IS31I DF9IS34I DF9IS35I DF9I37W DF9I39P DF9I50E DF9I51E This message is issued by the rvs XOT CTCP task when a command refering to a station is used Either the station could not be found the station was already active for Activate command or the station was not active nn OK This message is issued by the rvs XOT CTCP task in response to a command that has been accepted and executed This message is issued by the rvs XOT CTCP task in response to a Display DS command The message shows the status of CTCP LV shows the last modification date of program DFO9BI This message is issued by the rvs XOT CTCP task in response to a Display DS command The message shows the status of active XCB SID Sequencenumber status x25 Address nn REGS 0 7 XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX This message is issued by the rvs XOT CTCP task when an abend occurs The message s
125. ND may occur after reception of a data set the received data set could not be closed As a result of this error no response record will be sent back to the sending station The transmission must be repeated a restart is not possible in this case The transmission will be marked as abended with a record count of zero This ABEND is coded in the program DF035xxx During the initialization phase of a transmission the receiving station creates an active receive record An error occurs during the try to insert the record in the rvs control data set See Operations Manual Chapter 5 5 Eliminating Physical Errors of the Control Data Set This ABEND is coded in the program DFO36Bxx Should not occur error This ABEND is coded in the program DF037Bxx Should not occur error This ABEND is coded in the program DF037Bxx Occurs in relation with Dynalloc error 420 see OS VS2 MVS Job Management Should not occur error This ABEND is coded in the program DF047Axx Should not occur error This ABEND is coded in the program DFO49Dxx The rvs command DQ has been entered to display the data sets queued for transmission active send requests During reading the active send request entries of the rvs control data set an error occurred Abend within the rvs dispatcher routine posted ECB not found Should not occur error Abend within the rvs dispatcher routine stations table not available Should not occur error rvsMVS Messages an
126. NIE_CORELVL_ MALLOC FAILED FOR ENC OUTBUF Couldn t import the certificate Read cryptlib error code for more information Couldn t encrypt the dataset The partners certificate couldn t be found in the certificate store An error occurred during checking the signature of a signed dataset Either the certificate is wrong or the signature is corrupted You should check the serial number of the used certificate and try again The requested certificate for checking the signature couldn t be found in the certificate store You should check the configuration for certificate index or import the right certificate Couldn t push the data buffer into the security compression signature function The data may be corrupted Read the cryptlib error code for more information Couldn t pop a data buffer from the security compression signature function The data may be corrupted Read the cryptlib error code for more information Couldn t finalize the security compression signature process Read the cryptlib error code for more information Couldn t finalize the security compression signature process because of corrupted data Couldn t pop the last data buffer from the security compression signature function The data may be corrupted Read the cryptlib error code for more information Couldn t decrypt the dataset because of a missing private key Correct the keystore or encrypt the data with the right certificate Couldn t decrypt data
127. ONTROL TERMINATED SYSTEM sss USER uuu The task started for station sid initiating session mn terminated with system completion code sss and user code uuu A sid NO SESSION DEFINED FOR THIS STATION No entry is defined in the rvs sessions table for station sid A sid mn INVALID MODE The session identifier mn for the station sid is not defined in the rvs sessions table A sid mn SUBTASK ALREADY ACTIVE SESSION REJECTED The session mn to station sid is already active A new session mn to station sid will not be established A sid mn SUBTASK ALREADY ACTIVE CONTENTION PRIM SEC The session mn to station sid is in OPENDEST status for primary secundary LU A new session mn to station sid will not be established F sid mn SUBTASK NOT ACTIVE There is no active subtask which supports session mn to station sid LU luname UNKNOWN SESSION REJECTED The station sid assigned to the VTAM luname tries to establish a session to rvs This request is rejected because no luname is specified in the rvs stations table A sid mn RPL CONTROL FIELDS xxxxxx request This message is generated after the SCIP exit of the VTAM control task has been activated The reason for acitvating the SCIP exit may be obtained from the RPL control fields xxxxxx Expected are the following requests BIND UNBIND SDT start data traffic CLEAR and RQR request recoverey request
128. OURS N sid NO TRANSMISSIONS DURING LAST 7 DAYS The first message is output as a reply to the control data set queries N sid R name or N sid S name If no data sets have been received from the location concerned or if no data sets have been transmitted to this location during the last 24 hours If the name was specified as having at least 12 characters the second message appears if no data set beginning with name was received or transmitted within the last 7 days SYSOUT class FORM form DEST dest COPIES n This message appears in relation to message DF50011 after the entry of N sid f or DFz if the data set concerned was placed in the output queue of the receiving computer The parameters correspond to the job control parameters N sid INVALID REPLY Incorrect operator entry DS NAME DEV VOL DISP JOB TRKS TO This message appears as a reply to the commands N sid RR name or N sid RS name The message occures only if resident records have been found It is the head line for the following message rvsMVS Messages and Codes 5 rvs Messages DF5008I DF50091I DF5010I DF51001I DF5102A DF5103I DF5104I DF5104I DF51061I name The message displays parameters for the data set with DSNAME name The dispalyed parameters if specified in a resident control data set entry are device typ volume number disposition jobname Space capacity in traks and the final receiver of the data set T
129. P15KEYST_ COULD_NOT_SET_KEYSIZE IN_GEN_KEYPAIR Internal error Internal error Internal error Couldn t get the private key from the P15 keystore Please read the cryptlib error codes for more information Internal error Internal error Couldn t get the certificate from the P15 keystore Read the cryptlib error codes for more information The requested certificate couldn t be found in the P15 keystore Please check the index for valid values and try again Internal error Couldn t write the private key to the P15 keystore Read the cryptlib error codes for more information A private key already exists for the given index Use a different index or delete the old private key Internal error The certificate serial number is missing Please check the certificate for valid values Internal error Could not get the requested private key Please read the cryptlib error code for more information Could not get the requested certificate Please read the cryptlib error code for more information Internal error Internal error Internal error Could not create an internal buffer Please read the cryptlib error code for more information Could not set the label for the new keypair Please read the cryptlib error code for more information Could not set the key size for the new keypair Please read the cryptlib error code for more information The key size may not be supported rvsMVS Me
130. PDATE OF RR ENTRIES ENDED RC rc RECORDS PROCESSED nnn The above messages are displayed during start of the rvs monitor if the rvs release has changed an update of the rvs loadlibrary with a new rvs version was done and the rvs control data set RVS KD of the old version is used further on In this case some flags of elder resident receive entries must be modified in order to keep compatibility with the new version rc denotes the returncode of this function and nnn denotes the number of processed resident receive entries in general the total number of rr entries of the rvs control data set I sid NO SMF RECORD WRITTEN The User SVC for writing SMF records returned with a non zero returncode I sid INVALID START TIME An entry of the control data set relating to a data set which is to be transmitted contains an invalid start time rvsMVS Messages and Codes 5 rvs Messages DF1505P DF1507P DF1508P DF1520P DF1520P DF1551A DF1554P DF1555P DF1558P DF1601E DF1602E DF1603P I sid dsname SMF RECORD WRITTEN An SMF record has been written after receiving or transmitting a data set The dsname is related to this data set I sid DATA SET FOR TEST NO SMF RECORD WRITTEN No SMF record has been written for this transmission because the rvs start parameter TEST YES has been specified I sid NO SMF RECORD WRITTEN BECAUSE OF MISSING DATA No SMF record was written because no byte of th
131. PPC driver task when task termination is complete for the partner station sid DF8703E APPC DRIVER ABEND CODE EP PSW This message is issued by the rvs APPC driver task when an abend occurs The message shows the system abend code the entry point of the program and the address where the abend occurred When an abend occurs task termination will be done after all subtasks has been terminated DF87041I REGS 0 7 DOXXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX This message is issued by the rvs APPC driver task when an abend occurs The message shows the content of the registers 0 to 7 at the time of abend DF87051I REGS 8 15 xxxxxxxx XXXXXXXX XXXXXXXX XXXXXXXX rvsMVS Messages and Codes 5 rvs Messages DF8706I DF8707I DF8708E DF8709E DF8710E DF8711E DF8712E DF8713E XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX This message is issued by the rvs APPC driver task when an abend occurs The message shows the content of the registers 8 to 15 at the time of abend This message is issued by the rvs APPC driver task routine when a VTAM request for APPC LU 6 2 is done The message shows the APPC command and qualifier This message is issued by the rvs APPC driver task routine The message is issued as a continuation to a VTAM request info message for APPC LU 6 2 support The message shows the primary and secondary return codes and an associated text explanation APPCCMD ALLOC FAILED FOR
132. RE HHH EIER IER AERE EIER HHH HHH HHH RHEE LVv This message is issued in response to a STATUS CTCP command It shows status local and remote ip address port and the version of DFO95I DF9199P nn xxxxxxxx The XOT Task issues this message This message is issued if internal trace modul is used see command T RVSX The name of XOT Task subroutine that gets control is shown This message is for internal use only Messages of the XOT Worker Task DF9J521I nn ORT XXXX DIALING X25NUM ii rvsMVS Messages and Codes 5 rvs Messages DF9J59E This message is issued when the rvs XOT task sends an outgoing call packet to a partner station with the specified X 25 number nn ORT XXXX OFTP TASK ABEND SID DSNz2 This message is issued by the rvs XOT task when an OFTP task ABEND occurs DF9J611 XX X text DF9J96I This message is issued by XOT task and contains additional information about XOT interface Wrong Parameters Allocation failed Open TCP IP socket failed Set TCP IP socket option failed Bind of TCP IP socket failed TCP IP listen failed TCP IP accept failed TCP IP receive failed TCP IP connect failed TCP IP socket close failed TCP IP send failed TCP IP gethostbyname failed X 25 wrong PacketType X 25 wrong called number X 25 wrong calling number Router Address not defined gethost failed wrong XOT header received not connected facilities were refus
133. RGANIZATIONNAME KERNIE CERTMGMT COULD NOT SET ORGANIZATIONALUNITNAME KERNIE CERTMGMT COULD NOT SET STATEORPROVINCENAME KERNIE CERTMGMT COULD NOT SET LOCALITYNAME KERNIE CERTMGMT COULD NOT SET COMMONNAME KERNIE CERTMGMT COULD NOT SET KEYUSAGE KERNIE CERTMGMT COULD NOT SET EXTKEY SERVERAUTH KERNIE CERTMGMT COULD NOT SET EXTKEY CLIENTAUTH KERNIE CERTMGMT COULD NOT SET IS NOT CA KERNIE CERTMGMT COULD NOT CREATE SELF SIGNED CERTIFICATE KERNIE CERTMGMT COULD NOT GET CURRENT TIME KERNIE CERTMGMT COULD NOT SET VALIDTO KERNIE CERTMGMT COULD NOT SET IS SELFSIGNED KERNIE CERTMGMT COULD NOT SIGN CERTIFICATE KERNIE CERTMGMT COULD NOT CREATE CERTIFICATE REQUEST KERNIE CERTMGMT COULD NOT SIGN CERTIFICATE REQUEST The size of the requested certificate is wrong The certificate is probably corrupted Couldn t obtain enough memory for the requested certificate Couldn t read the certificate The certificate is probably corrupted Internal error Couldn t set the public key into the certificate or certificate request Read cryptlib error code for more information Couldn t set the country name into the certificate or certificate request Read cryptlib error code for more information Couldn t set the organization name into the certificate or certificate request Read cryptlib error code for more information Couldn t set the organizational unit na
134. RMINATION STARTED This message is issued by the Odette File Transfer Protocol task during file transfer An unrecoverable i o error occurred during disk read or write A sid accm sessonid CONNECTION ESTABLISHED This message is issued by the Odette File Transfer Protocol task when a connection has been established to the partner station A sid accm sessonid BUFSIZE nnnnn CREDIT nnn COMPRESS RESTART SPECIAL LOGIC DIRECTION 7 7 This message is issued by the Odette File Transfer Protocol task when a connection has been established to the partner station The message shows the exchange buffer size used for the connection the established credit value and whether the COMPRESS RESTART and SPECIAL LOGIC options are used or not and the DIRECTION Starting with rvsMVS Rel 2 5 the COMPRESS value indicates the highest compression level possible between both partners The current compression level for one file transfer will be shown by message DF9492P F sid accm sessonid ENCR COMPR FILE NOT SENT BECAUSE OF LOW OFTP VERSION This message is issued by the Odette File Transfer Protocol task when an encrypted compressed file wasn t sent because the OFTP version of the partner is too low Z sid accm sessonid SUCCESSFUL FILE TRANSFER direction FILE dsn This message is issued by the Odette File Transfer Protocol task when a file transfer has been successfully completed In the message is indicated whether the dataset was sent or r
135. RNIE_CERTST_ DESTROY_UNKNOWN_ CERTSTORE_TYPE KERNIE_CERTST_ GETCERT_UNKNOWN_ CERTSTORE_TYPE KERNIE_CERTST_ MALLOC_FAILED_ FOR_CERTSTORE KERNIE_CERTST_ GETCERT_CERTSTORE_ NOT_INITIALIZED KERNIE_CERTST_ GETCERT ALIAS IS NULL KERNIE_CERTST_ GETCERT ZERO ALIAS LEN KERNIE_KEYSTORE_ OPEN_INVALID_ KEYSTORE_POINTER KERNIE_KEYSTORE_ OPEN_MALLOC_FAILED FOR_KEYSTORE KERNIE_KEYSTORE_ OPEN_UNKNOWN_ KEYSTORE_TYPE KERNIE_KEYSTORE_ CLOSE UNKNOWN KEYSTORE TYPE KERNIE KEYSTORE GET KEYSET INVALID KEYSTORE POINTER KERNIE KEYSTORE GET KEYSET INVALID KEYSET POINTER KERNIE KEYSTORE GET KEYSET UNKNOWN KEYSTORE TYPE KERNIE KEYSTORE GET PRIV KEY INVALID KEYSTORE POINTER KERNIE KEYSTORE GET PRIV KEY INVALID KEYPAIR POINTER KERNIE KEYSTORE GET PRIV KEY INVALID KEYFILTER POINTER KERNIE KEYSTORE GET PRIV KEY UNKNOWN KEYSTORE TYPE The output dataset couldn t be opened Read the ERRNO for more information Couldn t write data to the output dataset Read the ERRNO for more information Couldn t close the output dataset Read the ERRNO for more information Internal error The requested certificate store is unknown Please check your configuration and set the right certificate store type The requested certificate store is unknown Please check your configuration and set the right certificate store type The requested certificate store is u
136. Response EERP protocol unit is sent or received Additional data are displayed here origin and destination of the EERP and the queuing date and time of the corresponding dataset S sid accm sessonid EFNA direction rc reason This message is issued by the Odette File Transfer Protocol task when an End File Negative Response EFNA protocol unit has been sent or received after a complete file transfer In the message is shown the code used in the EFNA protocol unit Refer to the document Odette specifications for file transfer for a further explanation of the code code reason 01 invalid filename 02 invalid destination 03 invalid origin 04 storage record format not supported or PDS transfer not supported 05 maximum record length not supported 06 file size too big 10 invalid record count 11 invalid byte count 12 access method failure 13 duplicate file 99 unspecified reason rvsMVS Messages and Codes 5 rvs Messages DF9419E DF9420E DF9421I DF9422P DF9423E DF94241 DF9425W DF9426E Z sid accm sessonid INVALID RESTART RECEIVED FOR DSN dsn This message is issued by the Odette File Transfer Protocol task when a Start File Positive Response SFPA protocol unit is received in response to a start file transfer request The SFPA protocol unit received indicates a restart point beyond the restart point requested by the task In the message is shown the file name associated with the restart request TE
137. SICAL DSN VOLUME 7 This message is issued by the SDS task if the file is not found on the volume specified in the KDRECORD Additional this message shows the physical datasetname of the file DF5N37I D 227 name NOT CATALOGED TRANSMISSION CANCELLED DF5N38I D 2227 name COMP SECR INPUT FILE DF5N40P D 2 2 DRIVER name Messages DF5N37I until DF5N40P are for possible error detection only They are not in effect for users purpose DF5N61P D 22 9 77 7 7 2 72 7 7 27 7 7 27 7 7 7 7 7 7 7 2 7 7 The following text may be ATTACH DF310A RC NOT ZERO Operator request CANCEL OPERATOR REQUEST 2ND STOP gt EXIT Operator request STOP input file not found key error security rc attach not zero Status messages of the Service Provider Task Send Dispatcher These messages are for possible error detection only They are not in effect for users purpose DF5N65P D cccccccc Return code message for access to the Security Key data Set with 222222222222222 RETURN CODE PUB KEY or RETURN CODE PRV KEY cccccccc VSAM return code and program return code This message is for possible error detection only It is not in effect for users purpose DF5N66P D 2 2 2 2 2 2 22 2 2 2 2 2 2 Internal file names used by the Service Provider Task Protocol message only This message is for possible error detection
138. SID protocol units has been exchanged 01 Invalid SSRM protocol unit received 02 Invalid SSID protocol unit received 03 Time out occurred during wait for SSRM protocol unit 04 Time out occurred during wait for SSID protocol unit 14 this state a connection exists to the partner station but no file transfer is active 01 Invalid RTR protocol unit received in response to a sent EERP protocol unit 02 Time out occurred during wait for RTR protocol unit after EERP protocol unit was sent 03 Time out occurred during idle wait as listener 04 An invalid File Protocol Unit was received during idle wait as listener 05 A protocol violation occurred during idle wait as listener ie a protocol unit was received that was not an SFID EERP CD or ESID protocol unit 15 Inact to active state This state is reached when a file transfer is to be started but before the actual data is transmitted rvsMVS Messages and Codes 5 rvs Messages DF9404E DF9405E DF9406P DF9407E DF9408E DF94091I 01 Time out occurred during wait for SFID protocol unit response after SFID protocol unit was sent 02 An invalid File Protocol Unit was received in response to a sent SFID protocol unit 03 A protocol violation occurred when the response to a sent SFID protocol unit was received ie the received protocol unit was not an SFPA SFNA or ESID protocol unit 17 Active state In this state is the actual file transmission done 01 Time out occurred
139. SSUED FOR SYSDSN name R ORT MO GDG ENQ NOT AVAILABLE SYSDSN name Message DF3703P is for error detection only They are not in effect for users purpose rvsMVS Messages and Codes 5 rvs Messages DF3704E DF3705E DF3706A DF3707E DF3708A DF3708A DF3709E DF3710E DF3711E R sid mn NO ACTIVE KD RECORD FOUND RESTART IS IMPOSSIBLE A restart is required but the active entry in the rvs control data set has been deleted The whole file must be transmitted once more R sid mn REQUIRED VOLUME volume NOT MOUNTED The disk volume volume is requested to receive a data set If the specified volume cannot be mounted the record of the control data set must be changed to receive the data set on another mounted volume R sid mn SYMBOLIC UNIT unit NOT DEFINED DATA SET WILL BE ON TAPE An invalid unit name unit has been specified to receive the data set on this unit see rvs User Manual The data set will be received on a work volume and then stored to tape RECORD R sid mn WRONG b COUNT IN TRAILER leyre J A rvs trailer record has been received This record contains a record and a byte count from the transmitting station A difference between the counts of the own and the transmitting station has been detected A new transmission of this data set is required R sid mn dsname ALREADY EXISTS ON ALL VOLUMES OF UNIT unit R sid mn OR NOT ENOUGH SPACE ON UNIT unit The data set dsname should be recei
140. ST DF9031W A sid SESSION REJECTED ISTATUS INACTIVE A request for establishing a session with station sid has been rejected because the stations entry is not released until now ISTATUS can be changed dynamically by the Operator see rvs Operations Manual if neccessary DF9032W COMMAND B sid REJECTED FOR STOP OF SESSION INACT LU luname The command B sid has been entered for station sid which is connected to rvsMVS via one or more SNA sessions This command will be rejected for all SNA connected stations The reason for this this command might cause errors like system abend 0A9 of rvsMVS If a session to a remote station cannot be stopped with the P sid or C sid command the logical unit Iuname should be set inactive within the VTAM environment in order to terminate the session DF9071E ALLOC ERROR xxxx yyyy ddname DSN dsname An error occurred during the allocation of the data set dsname and ddname For significance of XXXX error reason code yyyy information reason code see OS VS2 SPL Job Management DF9081I JOB RECORD jobname jobid NOT FOUND JA Job Active record type assigned to the job jobname jobid not found in the rvs control data set DF9082I UNALLOCATION FAILED FDBK xxxxxxxx An error occurred during the unallocation of the output data set see OS VS2 System Programming Library Job Management DF9083I OUTPUT DATA SET HAS BEEN DELETED After processing the output data set dsname by job
141. Set This message is followed by User Abend 3003 decimal abend of the rvs monitor Before the rvs monitor is started again the execution of procedure PDF0014A is required vTAM DF3017I 4x25 SUBTASK status RMOP This message occurs if one of the VTAM X25 specific rvs commands has been entered and the required action could not be executed The status may be NOT ACTIVE The rvs VTAM X25 RMOP control module is not active It may be started by entering the command A rvsVTAM rvsX25 RMOP NOT READY The rvs VTAM X25 RMOP control module has been started but it is not yet ready to execute rvs VTAM X25 RMOP commands STILL ACTIVE The rvs VTAM X25 RMOP control module has already been started DF3018I COMMAND IGNORED PREVIOUS rvs VTAM COMMAND NOT YET PROCESSED TRY LATER The rvs VTAM control module is temporarily unable to process the entered rvs VTAM command The reason is that the execution of the previously entered command is not yet complete DF30191I f sid LINE nnn IS status The status may be WAITING FOR WORK The leased line nnn to station sid has been activated At present however no transmission is active When data sets are held see DF50011 an explicit transmit command S sid is necessary to restart the transmission PENDING The line control for line nnn and station sid has been started but is not yet ready For the reason see DF3036A rvsMVS Messages and Codes 5 rvs Messages D
142. T Y EXT found in station entry for SID xxx but the external security is not included in current licence key The parameter is ignored WARNING EXTERNAL SECURITY ONLY SUPPORTED FOR ACESS METHODS X25 LU62 TCP IGNORED FOR SID XXX The external security parameter SECURIT Y EXT found in station entry for SID xxx but the external security is available only for access method X25 LU62 and TCPIP The parameter is ignored WARNING SECURITY EXT AND COMPRESS YES OFTP FOUND OFTP COMPRESSION DISABLED The external security parameter and parameter COMPRESS YES OFTP found in station entry This combination is not accepted The Parameter COMPRESS is disabled COMPRESS NO rvsMVS Messages and Codes 5 rvs Messages DF2243W DF2244W DF2244W DF2246W DF2247W DF2248W DF2249W DF2250W DF2251W DF2260W WARNING USER STATIONS NOT INCLUDED IN CURRENT LICENCE KEY IGNORED FOR SID XXX The user station parameter USR YES found in station entry for SID xxx but the user station is not included in current licence key The parameter is ignored WARNING VIRTUAL STATION NOT INCLUDED IN CURRENT LICENCE KEY IGNORED FOR SID XXX WARNING TRANSFER RESTRICTION NOT INCLUDED IN CURRENT LICENCE KEY IGNORED FOR SID XXX The virtual station parameter STAT VIRT or transfer restriction TFR YES found in station entry for SID xxx but the virtual station or transfer restiction is not included in current licence key The paramet
143. TED FOR MODE CLOSED This message is issued by the rvs APPC task in response to an Activate station command The command cannot be honored as the partner station has closed the mode used for sessions rvsMVS Messages and Codes 5 rvs Messages DF97321I ACTIVATION REJECTED FOR BUSY This message is issued by the rvs APPC task in response to an Activate station command The command cannot be honored as session negotiation is being done for the station DF9733E ERROR DURING VTAM RPL PROCESSING This message is issued by the rvs APPC task manager routine A VTAM APPCCMD request has been issued but during completion of the request a logical error occurred The RPL used for the request is not usable and the RPL will be skipped This message should never occur DF9734E APPCCMD RCVFMH5 FAILED FOR RC xxxx SENSE Xxxx This message is issued by the rvs APPC task manager routine The APPCCMD RCVFMH5 was issued to read a received function management header type 5 but the request failed The FM Header type 5 represents an allocation request from a network partner In the message is shown the VTAM return and sense codes for the failing request Refer to VTAM programming manual for further information DF9735E APPCCMD RECEIVE FAILED FOR RC xxxx SENSE xxxx This message is issued by the rvs APPC task manager routine The APPCCMD RECEIVE was issued to read data but the request failed In the mes
144. TER SPECIFICATION FOR X25 SNA TCP IP COMPONENT X25 sNA TCP IP COMPONENT nnnnn OF RVS CANNOT BE USED The rvs start parameter X25USEZYES SNAUSE YES or TCPUSE YES has been specified or is used as a default value In this case some other rvs start parameters concerning the specified component of rvs are mandatory But at least one of these parameters has not been specified As a result of this the specified component cannot be used same processing as if X25USE NO SNAUSE NO is specified See rvs Installations Manual description of the rvs startparameter X25USE SNAUSE or TCPUSE for more details In case of X25 or TCP IP nnnnn specifies the number of the CTCP X25 or the stack number TCP IP which cannot be used COMPLETE X25 TCP IP COMPONENT CANNOT BE USED The message shows that the definition of all specified CTCPs X25 or all specified IP stacks TCP IP are incomplete OWN STATION ID REQUIRED This message appears if the own station id is missing in the rvs start parameter specification rvsMVS Messages and Codes 5 rvs Messages DF1906E DF1908W DF19091I DF1910E DF2000P DF2001P DF2002P DF2002P DF2002P PARAMETER DOPERM YES IGNORED BECAUSE OF MVS RELEASE rel The rvs start parameter DQPERM YES has been specified But this parameter will be ignored because the MVS release rel is not at least MVS SP 2 2 0 or a following release MVS release 2 2 0 is
145. TP Client Task issues these messages when an error concerning a received end to end response has occurred They are intentionally issued for error detection For internal use only D sid sesid D sid sesid D sid sesid D sid sesid D sid sesid KDRECTYP KDREMOTE KDNEXT KDSTATUS nn KDDSN dsn name KDREADYD nnnnnnn KDREADYT nnnnnnn KDSTARTD nnnnnnn KDSTARTT nnnnnnn KDREC kdrecord FF 0X D sid sesid D sid sesid D sid sesid D sid sesid D sid sesid KEY KDRECTYP KDREMOTE KDNEXT KDSTATUS nn KEY KDDSN dsn name KDREADYD nnnnnnn KDREADYT nnnnnnn KEY KDSTARTD nnnnnnn KDSTARTT nnnnnnn KEY KDREC kdrecord x ox o B K The FTP Client Task issues these messages Show contents of KD file record For internal use only D sid sesid RE SET STLASTOK FLAG SID sid The FTP Client Task issues this message For internal use only R sid NONZERO RETURNCODE OF INSTALLATION EXIT DFUX001 R sid ONLY INSTALLATION STANDARDS WILL BE USED TO RECEIVE dsname R sid RECEIVING OF dsname REJECTED BY DFUX001 See DF3735W DF3735E R sid text This message precedes message DF88V1W text is a message that is passed to RVS by the user exit R sid RECEIVING OF dsname REJECTED DUPLICATE FILE See DF3738E R sid RECEIVING OF dsname REJECTED ODETTE ID MISSING rvsMVS Messages and Codes 5 rvs Messages The sender has not specified the ODETTE ID The transmission is cancelled
146. This ABEND is coded in the program DF099Axx Should not occur error An error occurred during establishing a rvs VTAM session OPENDST processing 991 3DF This ABEND is coded in the program DF099Axx Should not occur error An error occurred during OPENDST while processing a INQUIRE macro 992 3E0 This ABEND is coded in the program DF099Axx Should not occur error Posted ECB not found in the multiple wait routine 993 3E1 This ABEND is coded in the program DF099Axx A VTAM macro ended with failure 994 3E2 This ABEND is coded in the program DF099Axx During start of a RPL request this RPL was still active 996 3E4 This ABEND is coded in the program DFO99Axx A RPL request has been posted but it could not be assigned to any station 997 SED This ABEND is coded in the program DF099Axx The session could not be established no answer to a BIND command 1000 3E8 This ABEND is coded in the program DF925Axx In case of this error the SYSPRINT DD statement has not been specified 1001 3E9 This ABEND is coded in the program DF907Axx Any parameter of the parm field is invalid 1002 3EA This ABEND is coded in the program DF907Axx The DYNALLOC macro terminated with a non zero return code 1003 3EB This ABEND is coded in the program DF907Axx Dynamic allocation error See message DF9071E 1004 3EC This ABEND is coded in the program DF907Axx An invalid PARM keyword has been specified 1010 3F2 This ABEND is coded in the program DFO75Cx
147. VOLKSWAGEN T Systems Helease 05 04 04 Messages and Codes 2015 11 30 rvsMVS Messages and Codes Contents This documentation is valid for rvsMVS release 5 0 and higher For rvsMVS the following documentation is provided rvsMVS Installation Manual English Installation of rvs Useful for System Programmers rvsMVS Benutzer Handbuch German Manual for rvs Users rvsMVS User Manual English Manual for rvs Users rvsMVS Operator Handbuch German Manual for rvs Operator rvsMVS Operation Manual English Manual for rvs Operator Distribution information will be given kindly T Systems Enterprise Services GmbH Corporate Customers Silke Peigert Vertriebsassistenz rvs Holzhauser Str 4 8 13509 Berlin Tel 449 30 8353 23089 Fax 49 30 8353 84869 Email mailto Silke Peigert t systems com Technical information will be given kindly T Systems Enterprise Services GmbH rvs Systems Holzhauser Str 4 8 13509 Berlin Tel 49 30 3997 1777 International Tel 0800 664 7745 Germany only Fax 49 30 8353 84869 Email mailto rvs service t systems com Copyright 2015 by Volkswagen AG T Systems gedas deutschland GmbH rvsMVS Messages and Codes Contents Ps eo I9 4 1 5 1 5 2 Contents pitgejeifreito 5 rvs User en re 7 FVS Abend Codes 5 2 ec occecet Ure encre ca tace a en ra Ea vaL o Ca Ca uuo a EEUU EEUU 12
148. Y LG FOR name R ORT text Messages DF1198P until DF1199P are for possible error detection only They are not in effect for users purpose f sid lll LINE I O ERROR DECERRST X xx rvsMVS Messages and Codes 5 rvs Messages During data traffic with station sid on BSC line III IIl denotes the subchannel address an l O error has occurred xx denotes the error status flags as indicated within the BTAM control block DECB For a description of the error status flags see for example the IBM manual OS VS BTAM As a result of this error the line connection will be broken DF1202P f sid lll BTAM ERROR RECOVERY P X pp OPCD X oo TPCD X tt FLAGS X ff ERRST X ee CSWST X cccc SENSE X ss This message is written only to the rvs protocol not to console It indicates a failing BTAM I O during data traffic with station sid on BSC line III IIl denotes the subchannel address The error is recorded by the rvs error recovery routine for BTAM I O Depending on the kind of error s this routine tries to recover the error The result of the recovery may be continuation of the data traffic or break of line connection This message displays the following fields of the BTAM control block DECB For a detailed description of these fields see for example the IBM manual OS VS BTAM P postcode of BTAM I O completion OPCD type of BTAM operation executed BTAM macro TPCD tp operation code FLAGS status flags ERRST error
149. Z144P XX SNMPZ SEND TASK STARTED VERS 2 22 2 2 2 This message is issued by the SNMP task when Task initialization is complete The level of the program is shown XX SNMPZ SEND TASK ENDED This message is issued when SNMP Task ended XX GETHOSTID FAILED ERROR This message is issued when gethostid fails XX BIND SOCKET FAILED ERRNO ADDRESS PORT This message is issued when bind socket fails XX GET SOCKET FAILED ERROR ERRNO This message is issued when bind socket fails XX INITAPI FAILED ERRNO This message is issued when initapi fails The snmp task is terminated after this event Possibly the TCP IP configuration of SNMP is not correct XX API MODULE COULD NOT BE LOADED This message is issued when api module could not be loaded XX SEND MESSAGE FAILED ERRNO This message is issued when send fails XX SHUTDOWN CONNECTION FAILED ERROR ERRNO This message is issued when shutdown failes XX CLOSE SOCKET FAILED ERROR ERRNO This message is issued when close fails This message is issued when Get Host by Name fails XX GETHOST BY NAME RETURNED FOR LOCAL SOCKET This message is issued when Get Host by Name succeeded for own name XX GETHOST BY NAME RETURNED FOR PARTNER This message is issued when Get Host by Name succeeded for partner n
150. _ IN_EXPORT_CERT KERNIE DF053C COULD NOT CLEANUP CERT IN EXPORT CERT KERNIE_DF053C_ CRYPT_END_FAILED_ IN_EXPORT_CERT KERNIE DF053K OPEN SYSIN FAILED KERNIE DF053K EXP CERT MISSING PARM KERNIE DF053K GEN SELFSIGNED CERT MISSING PARM KERNIE DF053K GEN CERT REQUEST MISSING PARM KERNIE DF053K IMP CERT MISSING PARM KERNIE DF053K UNKNOWN COMMAND KERNIE DF053K CRYPT INIT FAILED IN SELF SIGNED CERT KERNIE DF053K COULD NOT CLEANUP CERT IN SELF SIGNED CERT KERNIE DF053K COULD NOT CLEANUP KEY IN SELF SIGNED CERT KERNIE DF053K CRYPT END FAILED IN SELF SIGNED CERT KERNIE DF053K CRYPT INIT FAILED IN GEN CERT REQUEST KERNIE DF053K COULD NOT CLEANUP CERT IN GEN CERT REQUEST KERNIE DF053K COULD NOT CLEANUP KEY IN GEN CERT REQUEST KERNIE DF053K CRYPT END FAILED IN GEN CERT REQUEST KERNIE DF053K CRYPT INIT FAILED IN IMPORT REPLY KERNIE DF053K CERT WITH DIFFERENT ISSUER ALREADY PRESENT KERNIE DF053K CERT WITH DIFFERENT SER ALREADY PRESENT The requested command isn t supported Please check your configuration and try again Couldn t initialize the security framework Read the cryptlib error code for more information Couldn t cleanup certificate within the security framework Read the cryptlib error code for more information Couldn t end the security framework Read the cryptlib error c
151. a ULS permission check for send request failed DF5280P X ORT ACME 12345678 USER SEPARATION LOG RECORD NOT FOUND This message indicates that a User separation log record is not found DF5299P X sid acme nm sss This message appears only within the rvs protocol for internal use only Dispatcher trace command T DISPALL This message is issued by the dispatcher task trace routine Shown is the name of dispatcher task subroutine which gets control rvsMVS Messages and Codes 5 rvs Messages Messages of the Send Dispatcher Task DF5MO1I SEND DISP SUBTASK STARTED VERSION 1234567890123456789012345678901234 DF5MO1I SEND DISP SUBTASK ENDED VERSION 1234567890123456789012345678901234 Start End message of dispatcher routine This program is started just after start of the rvs monitor For a description of the functions performed by this task see Installations Manual chapter 5 rvs Start parameter DSPTI and DSPTIW vvv version of Dispatcher dd mm yy tt mm time of assembly aa bb cc time of last changes in the Dispatcher DF5M11I SDDDDDD STTTTTTT ASSID 12345678901234567890123456789012345678901234 This message one or more is a reply for DD command SDDDDDD day of queuing dataset STTTTTTT time of queuing dataset 123 data set name DF5M22P 123456789012345678901234567890123456789012345678901234567890 The following text may be First 54 characters of KD record
152. abend occurred When an abend occurs task termination will be done after all subtasks have been terminated D sid sesid REGS 0 7 xxxxxxxx XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX The FTP Server Task issues this message when an abend occurs The message shows the content of the registers 0 to 7 at the time of the abend D sid sesid REGS 8 15 XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX The FTP Server Task issues this message when an abend occurs The message shows the content of the registers 8 to 15 at the time of the abend D sid sesid SERVER event The FTP Server Task issues this message when find appropriate FTP Server event The following list describes the different FTP Server events STOP OR CANCEL EVENT OPERATOR COMMAND EVENT NR FILE EVENT EE FILE EVENT XX FILE EVENT HD FILE EVENT For internal use only D sid sesid RC nnnn HEX DFO88V KD RECORD BUILD The FTP Server Task issues this message when checking of HFID records ended with error AR records build See returncode values in message DF8583P For internal use only D sid sesid NO AR KDRECORD BUILD RC nnnn rvsMVS Messages and Codes 5 rvs Messages The FTP Server Task issues this message when checking of HFID records ended with error no AR records build See returncode values in message DF8583P For internal use only DF8550I D sid sesid END OF FTP TRAILER FILE TRANSF
153. acro The status code yy hex is only issued by the SCRATCH macro For a further description of these codes refer to the IBM manuals which describe the scratch or catalog macro DF1242E F sid CREATION OF SEND REQUEST FAILED DF1242W F sid dsn NOT QUEUED TO STATION xxx A received data set dsn should be automatically passed by to a final station xxx but could not be queued for sending DF1243P R sid mn 2 2 This message is issued by the Odette File Transfer Protocol task when a data set has been received One of the following actions and or errors have occurred after receiving rvsMVS Messages and Codes 5 rvs Messages DATASET RENAMED dsname With DFSMS the data set is received under a temporary data set name with timestamp After complete reception the data set has been renamed to its final name dsname DATASET NOT CATALOGED xx The data set could not be cataloged after receiving For the information reason code xx see MVS ESA Authorized Assembler Programming Guide DATASET NOT SCRATCHED RC xxxx xxxxxxxx dsname The temporary data set could not be cataloged after start of reception For this reason the already allocated data set is to be scratched which did not end successfully For return and diagnosis codes xxxx xxxxxxxx see DFSMS MVS Diagnosis Reference DATASET NOT RENAMED RC xxxx xxxxxxxx dsname The temporary data set could not be renamed after reception For return and
154. aded PDS the file has been loaded again The unloaded PDS is not longer needed and will be scratched But during scratch of this file it has been determined that this file is not cataloged Thus it can not be scratched This situation should normally never occur STATION ID MISSING WITHIN DIAL COMMAND The command DIAL sid has been entered But the required parameter sid id of station to be dialed has not been specified As a result of this the dial request will be ignored STATION ID sid NOT DEFINED WITHIN STATIONS TABLE The command DIAL sid has been entered But the specified value of sid id of station to be dialed is not defined within the rvs stations table The dial request will be ignored STATION ID sid NOT DEFINED FOR BTAM BSC LINES The command DIAL sid has been entered But there is no entry for station sid within the rvs stations table which defines sid as a station connected via BTAM BSC line As a result of this the dial request will be ignored NO BTAM BSC LINE FOUND FOR STATION sid The command DIAL sid has been entered But no line entry has been found within the rvs stations table for the subchannel address es specified within the entry parameter SUBCHANL for station sid As a result of this the dial request will be ignored NO AUTODIAL LINE FOUND FOR STATION sid rvsMVS Messages and Codes 5 rvs Messages DF62061 DF6207E DF6208I DF62091I DF6210I DF6211I DF6301E DF
155. ally this message occurs only if the data set shall be directed to a specified volume R sid mn LINE BLOCK LENGTH nnnnn LARGER THAN RECEIVED BUFFER LENGTH mmmmm An error was detected in the format of the received line buffer The line buffer length specified in the two first bytes of the line buffer is not equal to the number of the received bytes R sid mn ADDRESS ALRBPTR xxxxxxxx If an error occurs during allocation of a data set the dynamic allocation control blocks are listed in hexadecimal code R sid mn INCONSISTENT LENGTH VALUE IN LINEBUFER DETECTED rvsMVS Messages and Codes 5 rvs Messages DF3721E DF3722E DF3723E DF3724P The transmitting station specified an invalid length value in a data record The transmission of the data set is cancelled an rvs trace command T sid should be started to obtain error information in case of a later restart If the problem still exists in a later restart the software of the sending station does probably not work ok the trace should be passed to the producer of the sending software R sid mn BLOCKSIZE LRECL NOT PROVIDED The rvs header record sent by the transmitting station did not contain any value about record or block length of the data set R sid mn BLOCKSIZE LRECL LARGER THAN MAX BLOCKSIZE OF RECEIVING DISK The block length of the output data set exceeds the maximum track capacity of the used disk volume An automatic deblocking was not possib
156. already existing file has been extended This message is preceded by message DF2701P which contains more information about the kind of the error probably allocation error not enough space for the new extended file R sid mn ESTAE RECOVERY FOR ABEND code DSN dsname A file with the name dsname is to be received from station sid An abend code has occurred e g system abend B37 or D37 This abend will be recovered by normally termination of the transmission A dump will not be written for the abend R ORT MO RESIDENT ENTRY RR FOR 12345678901234567890123456 IS USED Information a resident receive entry is used R ORT MO text R ORT MO 00010203 04050607 08090A0B OCODOEOF 0123456789ABCDEF Messages DF37441 until DF3745P are for error detection only They are not in effect for users purpose f sid mn dsname volume nnnnnn BL day time sid2 JOBNAME jobname This message appears as a reply to the commands DS DR or DQ The contents of some parameters of this message depends on the type of command entered The meaning of the parameters is rvsMVS Messages and Codes 5 rvs Messages Q the message is related to files queued for transmission R the message is related to files which are just to be received S the message is related to files which are just to be transmitted dsname name of a data set which is queued for transmission transmitted or received volume volume the data set dsname resides
157. alue SEND ISSUED S L DATAS This message is issued by the rvs TCP IP after a write macro has been issued The message displays the remote station socket number datalength and the first 4 bytes of the sent data ODETTE TASK EOT ECB POSTED SOCKET SID This message is issued by the rvs TCP IP task when the ODETTE task EOT ECB has been posted SEND DATA FLUSHED DUE TO LOCKED SERVER QUEUE s This message is issued by the rvs TCP IP task when data to be sent to the ODETTE file transfer protocol task was rejected due to a locked server queue ie The task was not ready to accept the request The message displays the related socket number A 2222222272222 HEF HHH HEH HHH P HHHHH This message is issued by the rvs TCP IP task when a connection is to be initiated This message displays IP address and port number of the remote station and of the own station as well rvsMVS Messages and Codes 5 rvs Messages DF8375W DF8376E DF8377P DF83781I DF83791I DF8380P DF83811I DF8382E DF8383W DF8384P OPTION ALL NOT SUPPORTED BY THIS COMMAND This message is issued by the rvs TCP IP task when the option ALL has been used for a command for which this option is not supported INVALID COMMAND PARAMETER This message is issued by the rvs TCP IP task when an invalid parameter is used with an issued command ODETTE TASK HAS BEEN POSTED S SID This message
158. ame D sid sesid KDUPDAT 88F xxxxxxxx TYP xx rvsMVS Messages and Codes 5 rvs Messages DF8599P DF85A0P DF85A1P DF85A2P DF85A3P DF85A4P DF85A5P DF85A6P DF85A7P DF85A8P DF85A9P DF85BOP DF85B1P DF85B2P DF85B8P DF85B3P DF85B4P DF85B5P DF85B6P DF85B7P DF85BAP DF85BBP DF85BCP DF85BDP The FTP Server Task issues this message when verification HFID record failed Shown is the HFID file name The FTP Server Task issues this message List internal action of FTP Server task with KD control file For internal use only D sid sesid xxxxxxxx nnnnnn nnnnnn The FTP Server Task issues this message Show is the name of FTP Server Task subroutine that gets control For internal use only D sid sesid CS RECORD FOUND DSN dsname D sid sesid NO CS RECORD FOUND DSN dsname D sid sesid ORIGIN STATION KNOWN D sid sesid SENT DSN dsname D sid sesid MESSAGE REQUESTED D sid sesid EEIDDSN dsname D sid sesid EEIDORIG odette id of sender of EEID D sid sesid EEIDDEST odette id of recipient of EEID D sid sesid EEIDDATE date EEIDTIME time ox These messages are issued by the FTP Server task when an error concerning a received end to end response has occurred They are intentionally issued for error detection For internal use only D sid sesid D sid sesid D sid sesid D sid sesid D sid sesid KDRECTYP KDREMOTE KDNEXT KDSTATUS nn
159. ame XX SNMPZ TRAP MNG TASK STOPED DF031Y TASK This message is issued when the Task was stopped rvsMVS Messages and Codes 5 rvs Messages DFZ145P XX SNMPZ TRAP MNG TASK CANCELED DF031Y TASK This message is issued when the Task was cancelled DFZ146P XX SNMPZ TRAP MNG TASK BREAKING DF031Y TASK This message is issued when the Task was stopped with break rvsMVS Messages and Codes 5 rvs Messages OFTP2 internal error codes Error code 4100001 4111001 4111002 4111003 4111004 4111005 4111006 4111007 4111008 4111009 4111010 4111011 4111012 4111013 4111014 4111015 4111016 4111017 4111018 4111019 4111020 4111021 4116001 4116002 Alias KERNIE_OPERATOR_STOP KERNIE_IO_ INVALID_OUTPUT_ RECBLKLENGTH KERNIE IO INVALID INPUT RECBLK LENGTH KERNIE IO OPEN INPUT FILE FAILED KERNIE IO OPEN OUTPUT FILE FAILED KERNIE IO CLOSE INPUT FILE FAILED KERNIE IO CLOSE OUTPUT FILE FAILED KERNIE IO RECORD WRITE FAILURE KERNIE IO RECORD READ FAILURE KERNIE IO ILLEGAL LAST V RECORDLENGTH KERNIE IO ILLEGAL READ _V_ RECORDLENGTH KERNIE IO MALLOC FAILED FOR DYN T KERNIE IO DYNINIT FAILED KERNIE IO DYNALLOC FAILED KERNIE IO DYNFREE FAILED KERNIE IO INPUT FILE FLDATA FAILED KERNIE IO OUTPUT FILE FLDATA FAILED KERNIE IO GET SIZE RECORD READ FAILURE KERNIE_IO_ ALLOC_ZERO_RECLEN
160. ame is required after the situation is clarified nnnnn 2 6 digit new restart count Since no logical check of this counter is performed by rvs monitor it is advisable to reach an agreement with the receiver by telephone S sid LRECL MUST BE LESS THAN 2045 BYTES SENDING IS IMPOSSIBLE The remote station is not able to handle a line protocol which allows data compression In this case the LERCL of the data set to be transmitted must be less than the physical size of the line buffer 2045 bytes Otherwise no transmission can take place S sid I O ERROR ON VOLUME volume DSN dsname rvsMVS Messages and Codes 5 rvs Messages DF3411E DF3412E DF3414A DF3415A DF3416P DF3417E DF3419W A read error has occurred in the data set indicated The transmission is aborted No automatic restart takes place If the error occurs again after a restart the data set must either be copied with a utility or re established Another cause of this error can be that the data set contains no data S sid RESTART COUNT EXCEEDS BLOCKNUMBER The data set contains less blocks than specified by the receiver during restart The restart is not possible no subsequent automatic restart takes place Another cause can be that the data set was re established in the meantime and the new data set is smaller than the original one f sid INCONSISTENT VALUES LRECL nnnnn LINEBLK rrrr This message appears only in connection with transmi
161. ame should be received on a disk volume which is a part of the unit group unit but all disk volumes of this unit already contain a data set with name dsname The data Set will be received on work volume and than it will be copied to tape The following may be done to avoid this situation 1 After processing the received data set delete this data set 2 Specify a unit group which is consisting of more disk volumes DF3509E R sid dsname INVALID LRECL BLKSIZE IN HEADER The remote station specified an invalid value LRECL or BLKSIZE in the header protocol record for the data set dsname which shall be received DF3510E R sid I O ERROR ON OUTPUT DATA SET NEW TRANSMISSION REQUIRED NO RESTART A disk error has occurred during data output No restart is possible and a new transmission is required An attempt will be made to utilize another volume DF3511E R sid I O ERROR DURING RESTART POSITIONING NEW TRANSMISSION REQUIRED NO RESTART The data set already received cannot be read because of a read error A new transmission is required DF3512E R sid RESTART COUNT EXCEEDS DATA SET BLOCK COUNT RETRANSMISSION WILL BE STARTED WITH LOWER COUNT The number of blocks received is lower than the specified restart count The transmission can be restarted by means of the operator command R sid STARTING DF3513I R sid dsname volume 1 b RESTARTING ON BLOCK nnn The start restart of reception of the data set dsname
162. and Codes 3 rvs Abend Codes 3 rvs Abend Codes In the event of serious errors subtasks of the rvsMVS Monitor or rvsMVS Utility Programs terminate abnormally The following codes may appear Code Code decimal hexadecimal Meaning 280 118 This ABEND is coded in the program DFO028CO00 The allocation of a work data set for automatic job start was not possible 282 11A This ABEND is coded in the program DF028C The code may occur a during accessing OPEN READ the member RVS TABLES STAPEJC RVS TABLES RTAPEJC b during writing received data to the sysout queue C during starting a reader in order to initiate jobs to copy data from tape to disk transmitting a tape or to copy received data from a workfile to a tape see rvsMVS Installation Manual 310 136 This ABEND is coded in the program DF031C The abend may occur during processing of command MSGOUT If DD statements SYSWTO and or RVSDUMP are assigned to sysout classes these files are closed and unallocated The following allocation of these files or open processing failed in this case The monitor is no longer operational and thus terminated abnormally The dump of this abend should be kept for determination why the allocation or open was failing 340 154 This ABEND is coded in the program DF034K00 The code may occur if a the number of data set blocks of the data set to be transmitted could not be computed This may happen if the data set is not a
163. another process has finished and freed its memory rvsMVS Messages and Codes 5 rvs Messages 4131010 4131011 4141001 4141002 4141003 4141004 4141005 4161001 4161002 4161003 4161004 4161005 4161006 4161007 4161008 4161009 4161010 4161011 4161012 4161013 4161014 KERNIE_CORELVL_ MALLOC_FAILED_FOR_ FILE_INBUF KERNIE_CORELVL_ UNKNOWN CIPHER SUITE KERNIE MVSIF MVS PARM NULL KERNIE_MVSIF_ MALLOC FAILED FOR CL PARM KERNIE_MVSIF_ MALLOC_FAILED_ FOR IO PARM KERNIE_MVSIF_ MALLOC_FAILED_FOR_ ERR_FIELDS KERNIE_MVSIF_ MALLOC_FAILED_FOR_ HFSP15 CONFIG KERNIE_UTIL_ TRANSLATE_BUFFER_NULL KERNIE_UTIL_ TRANSLATE_TABLE_NULL KERNIE_UTIL_ COULD_NOT_OPEN_EXTCONF KERNIE_UTIL_ ZERO POINTER FOR READ BUFFER IN READ U FILE KERNIE_UTIL_ MISSING PARAMETER FILENAME IN READ U FILE KERNIE_UTIL_ COULD_NOT_OPEN_ FILE IN READ U FILE KERNIE_UTIL_ NO MEMORY FOR BUFFER STRUCT IN READ U FILE KERNIE_UTIL_ NO_MEMORY_FOR_READ_ BUFFER IN READ U FILE KERNIE_UTIL_ ERROR DURING READ FROM FILE IN READ U FILE KERNIE_UTIL_ ERROR DURING CLOSE FILE IN READ U FILE KERNIE_UTIL_ NO MEMORY FOR TARGET BUFFER IN READ U FILE KERNIE_UTIL_ ZERO POINTER FOR WRITE BUFFER IN WRITE U FILE KERNIE_UTIL_ INVALID_WRITE_BUFFER_ SIZE IN WRITE U FILE KERNIE_UTIL_ MISSING PARAMETER FILENAME IN WRITE U FILE Couldn t obtain enough memory to create t
164. arting from the date information D sid sesid FTP message D sid sesid UNEXPECTED END OF FTP OUTPUT FILE D sid sesid FTP CONNECTION REJECTED D sid sesid FTP SESSION REJECTED D sid sesid TRANSMISSION CANCELED D sid sesid FTP FUNCTION ERROR D sid sesid VERIFY FTP RETURNCODE nnnn The FTP Client Task issues these messages by checking FTP output file Appropriate set of messages DF8860E DF8868E show corrected or not corrected flow FTP connection during transfer of rvsMVS FTP file If FTP returncode is equal 04 or 08 the FTP connection ended with error see rvs log messages D sid sesid UN ALLOC FAILED nnnn mm VOL volume DSN dsn The FTP Client Task issues this message when an error occurs during allocation or unallocation of a dataset In the message is shown the return code from the allocation request and the volume and dataset name of the file for which the error occurred D sid sesid OPEN FAILED FOR VOL volume DSN dsn The FTP Client Task issues this message when a dataset to be send or received could not be opened In the message is shown the volume and dataset name of the file for which OPEN error occurred D sid sesid SUCCESSFUL FILE TRANSFER direction FILE dsn The FTP Client Task issues this message when a file transfer has been successfully completed In the message is indicated whether the dataset was sent or received direction and the dataset name dsn D
165. ata set dsname failed to process from the job jobname e Tapes to be transmitted are to be converted to disk e Received disk data sets are converted to tape if output is to be placed on tape e Received lists are to be written to SYSOUT e Received jobs have been started directly e User jobs are started for processing of the data if indicated in the resident receive record in the control data set RC e 4 Error during allocation internal reader e 8 Error during open internal reader e 12 Error during open jobcard JC input for internal reader e 16 Error during open job SC input for internal reader e 20 Error during open jobcard JC input batch job e 24 Error during open job SC input batch job e 28 Error during store prepared record into internal reader e 32 Error during close internal reader rvs MONITOR STARTED DAY yy ddd tt mm TIME hh mm DUR 999min Starting message of rvs Monitor with date yy year ddd machine date tt current day of the month mm month and start time hh hours mm minutes The message can be requested by operator command DB at any time Then 999 shows the duration of rvsMVS rvs OC READY If this message appears the rvs monitor is ready to accept rvs commands INVALID REPLY REENTER COMMAND The command previously entered is formally incorrect f sid lll dsname nnn BL VOL volume status rvsMVS Messages and Codes 5 rvs Messages
166. ation A MODCB GENCB or SHOWCB macro could not be executed or the log data set could not be opened This abend may occur if a new Log Data Set has been created but not initialized If this abend occurs within the ISPF panels of rvs the reason may be insufficient access authority for the rvs log data set required authorization ALTER 845 34D This ABEND is coded in the program DF054Yxx The rvs LOGLOG Data Set is full 846 34E This ABEND is coded in the program DFO054Yxx The installation exit DFUX001 ended with a nonzero return code 850 352 This ABEND is coded in the program DFO54Yxx An error occurred during access to the rvs log record A record was found in the control data set that could not be de compressed 901 385 This ABEND is coded in the program DFO90Axx Should not occure error The execution of a MODCB macro failed 902 386 This ABEND is coded in the program DFO90Axx Should not occur error Posted ECB not found 904 388 This ABEND is coded in the program DFO90Axx Should not occur error Error during LOSTTERM exit processing 905 389 This ABEND is coded in the program DFO90Axx Should not occur error Branch table overflow rvsMVS Messages and Codes 3 rvs Abend Codes 908 38C This ABEND is coded in the program DF908Bxx The load processing to fetch the module DF080A00 failed 916 394 This ABEND is coded in the program DF090Axx Should not occur error The execution of the SHOWCB macro failed 990 3DE
167. block text pointer list and text units F sid acme sessid DELETE EXISTING FILE BECAUSE OF SPECIFIED EXPIRATION DATE A restart of a transmission receive direction will be initiated If there is specified an expiration date for this data set to be received a restart at the abended position will be impossible That s why the part of this file which was already received before the transmission abend occurred will be deleted F sid acme sessid OUTPUT DATASET ALREADY IN USE A data set is to be received but the output data set is just used by another task within the rvs monitor This situation should normally not occur One reason for this might be that files from different remote stations shall be stored in the same output file as specified in resident receive entries and the replace function is also used If this situation is detected the transmission will be cancelled and dynamic allocation error 0210 99 is used as error indication R sid acme sessid aaaaaaaa bbbbbbbb cccccccc dddddddd The message show allocation parameter for end file only for COMR SECR component aaaaaaaa file size in bytes hex bbbbbbbb BLKSIZE for end file hex cccccccc primary allocation for end file hex ddddddd secondary allocation for end file hex R sid WAITING FOR LIST OF RESIDENT RECEIVE ENTRIES The message is displayed if the monitor internal list of resident receive entries is not yet created available If this sit
168. cate dataset is not supported Please check dataset attributes for valid values Couldn t close the certificate dataset Read the ERRNO for more information Couldn t read a record from the certificate dataset Read the ERRNO for more information The certificate is too big Please contact the rvsMVS support Couldn t initialize the security framework Read the cryptlib error code for more information Couldn t convert the read certificate into the internal format Please read the cryptlib error code for more information Couldn t convert the read certificate into the internal format Please read the cryptlib error code for more information Couldn t end the security framework Read the cryptlib error code for more information Couldn t initialize the security framework Read the cryptlib error code for more information The requested certificates couldn t be found Check the input parameter for valid values Couldn t end the security framework Read the cryptlib error code for more information Couldn t open SYSIN to get input parameter Please check your configuration and try again rvsMVS Messages and Codes 5 rvs Messages 4201015 4201016 4201017 4201018 4211001 4211002 4211003 4211004 4211005 4211006 4211007 4211008 4211009 4211010 4211011 4211012 4211013 4211014 4211015 4211016 4211017 KERNIE_DF053C_ UNKNOWN_COMMAND KERNIE_DF053C_ CRYPT_INIT_FAILED
169. certificate request Read cryptlib error code for more information Couldn t sign the certificate request by the own private key Read cryptlib error code for more information rvsMVS Messages and Codes 5 rvs Messages 4116025 4121001 4121002 4121006 4121009 4121010 4121011 4121012 4121013 4121014 4121015 4121016 4121017 4121018 4121019 4131001 4131002 4131003 4131004 4131005 4131006 4131007 4131008 4131009 KERNIE_CERTMGMT_ COULD_NOT_ IMPORT_CERTIFICATE KERNIE_CORE_ EXPORT_CERT_NOT_FOUND KERNIE CORE CHECKSIGNING ERROR SIGNATURE KERNIE CORE IMPORT CHECKCERT NOT FOUND KERNIE CORE PUSH DATA FAILED KERNIE CORE POP DATA FAILED KERNIE_CORE_ FLUSH_DATA_FAILED KERNIE_CORE_ FLUSH_CORRUPTED_DATA KERNIE_CORE_ FLUSH_AND_POP_ DATA_FAILED KERNIE_CORE_ DECRYPT_PRIVATE_ KEY_NOT_FOUND KERNIE_CORE_ DECRYPT ERROR IN KEYSTORE KERNIE CORE NEXT FUNCTION UNKNOWN FUNCTION CODE KERNIE CORE DECRYPT FAILED KERNIE CORE UNCOMPRESS FAILED KERNIE CORE SECURITY FAILED KERNIE_CORELVL_ CRYPTLIB_INIT_FAILED KERNIE_CORELVL_ CREATE_ENV_FAILED KERNIE_CORELVL_ CREATE_SIG_ENV_FAILED KERNIE_CORELVL_ CREATE_COMP_ENV_FAILED KERNIE_CORELVL_ CREATE_ENC_ENV_FAILED KERNIE_CORELVL_ CRYPTLIB_SET_ATTR_FAILED KERNIE_CORELVL_ MALLOC_FAILED_FOR_ SIGN_OUTBUF KERNIE_CORELVL_ MALLOC_FAILED_FOR_ COMP_OUTBUF KER
170. che list of rvs Unallocation of this file may be forced only with the reset command for the cache list F JDSLIST R This command clears the complete cache list including unallocations for all jobdatasets within the cache list DF6601E DYNAMIC ALLOCATION ERROR RC xx ERROR yyyy INFO zzzz DDN ddname DSN dsname The monitor and some service programs are attempting to allocate the data sets dynamically using the DDN KD rvsLOG and STATIONS This is possible if they are not allocated by other jobs In case of an error this message appears ALLOCATED DF69011 A sid LINE nnn b UNALLOCATED When line control for station sid was activated stopped the line nnn had been allocated unallocated dynamically ALLOCATION DF6902E A sid t ERROR xxxx yyyy FOR LINE nnn lUNALLOCATION During dynamic allocation unallocation of line nnn An error xxxx with info code yyyy occurred SVC99 Error Codes see OS VS2 SPL Job Management DF6903E A sid CANNOT ALLOCATE LINE nnn UCBNAME NOT DEFINED This message occurs when an invalid value for parameter UCBNAME was specified In this case the dynamic allocation of the line is not possible rvsMVS Messages and Codes 5 rvs Messages Messages of the TCP IP line driver of rvsMVS for the TCP IP stack of IBM DF8301I TCP IP INITIALIZATION COMPLETE LV 2 7 This message is issued by the rvs TCP IP task when task initialization is complete The level of
171. d rvsMVS Messages and Codes 5 rvs Messages used only within the internal transmission protocol of rvs zT tape disk or disk tape conversion has been started jobname in subsequent line dsname name of the dataset volume volume where the dataset resides QT ddd hh mm For send requests queuing date and time for the dataset QD yyddd QT hhmmsst For end to end responses queuing date and time of the reference dataset ST ddd hh mm or ET ddd hh mm Start End date and time for the transmission nnnnnn RE or BL Number of datarecords RE or datablocks BL which have been already transmitted received bbbb bbb MB Number of bytes of the dataset P nnn Displays the priority of the transmission value is between 0 and 255 ser This parameter is displayed only when the dataset has been queued with option SERIALZYES status END means that the transmission is complete ABE means that the transmission has been terminated with an error REJ means that either the installation exit DFUX001 terminated with a return code not equal 0 see also message DF9201E or DF5624E or in case of PDS transfer the remote station does not support PDS transfer ET ddd hh mm ss End date and time for the transmission DS dsn Displays the dsname of the dataset It is possible that the dsname used in the rvs messages is different from the physical dsname of the data set in case of using the rvs rename function dsn is the physical dsname In cas
172. d Codes 3 rvs Abend Codes 540 545 546 550 551 561 563 565 566 580 591 599 21C 221 222 226 227 231 233 235 236 244 24F 257 An error occurred during access to the rvs Control Data Set A MODCB GENCB or SHOWCB macro could not be executed or the control data set could not be opened This abend may occur if a new Control Data Set has been created but not initialized If this abend occurs within the ISPF panels of rvs the reason may be insufficient access authority for the rvs control data set required authorization ALTER This ABEND is coded in the program DF054Cxx The rvsLOG Data Set is full Use procedure PDF0014A see INSTALLATIONS MANUAL to reset the data set This ABEND is coded in the program DF054Cxx The installation exit DFUX001 ended with a nonzero return code This ABEND is coded in the program DF054OCxx An error occurred during access to the rvs control record A record was found in the control data set that could not be de compressed Please use program DF144A to find and delete the incorrect record s This ABEND may occur after activation of a BSC line During initialization of the line control program a BTAM terminal list could not be created because there are too many entries within the rvs stations table which have defined this line as a subchannel to be used The maximum of 200 station table entries is exceeded This ABEND is coded in th
173. d acme sessid TEXT POINTERS ADDR xxxxxxxx TEXT UNIT unitname This message is issued in case of a dynamic allocation error It will display the contents of the used SVC 99 parameter list allocation request block text pointer list and text units DF88X5P 7 KDUPDAT 88X TYP This message is issued by the FTP task List internal action of FTP task with KD control file For internal use only rvsMVS Messages and Codes 5 rvs Messages NOT CATALOGED DF88Y1W F sid dsn NOT UNCATALOGED RC xx yy NOT DELETED A successful sent dataset should be deleted uncataloged resp a successful received dataset should be catalogued The action failed xx denotes the return code hex of the SCRATCH CATALOG macro The status code yy hex is only issued by the SCRATCH macro For a further description of the codes see IBM manual OS VS2 SPL Data Management DF88Y2E F sid CREATION OF SEND REQUEST FAILED DF88Y2W F sid dsn NOT QUEUED TO STATION xxx A received dataset dsn should be automatically passed by to a final station xxx but could not be queued for sending DF88Y3P R sid mn 2 2 2 2 2 2 2 2 This message is issued by the Odette File Transfer Protocol task when a dataset has been received One of the following actions and or errors have occurred after receiving DATASET RENAMED dsname With DFSMS the dataset is received under a temporary dataset name with timestamp After co
174. d the VTAM return and reason code Refer to VTAM programming manual for further information This message should normally never occur This message is issued by the rvs APPC task manager routine when a VTAM request for APPC LU 6 2 is done The message shows the APPC command and qualifier CONT RCPRI SEC xxxx xxxx This message is issued by the rvs APPC task manager routine The message is issued as a continuation to a VTAM request info message for APPC LU 6 2 support The message shows the primary and secondary return codes and an associated text explanation PLUZ RSN ACT LU 2222222 This message is issued by the rvs APPC task manager routine The message is issued when a VTAM Attention exit is driven for the APPC support The message indicates the primary LU ACB for which the exit was taken the exit reason code and the logical unit LU that originated the exit Exit Exit reason description FMH5 An FMH 5 was received CNOS A CNOS request was received LOSS A session for a given partner mode is taken down PLUZ RSN xxxxxx xx ACT LUz CID This message is issued by the rvs APPC task manager routine The message is issued when a VTAM exit is driven in order to cause some action The message indicates the primary LU ACB for which the exit was taken Also indicated is the type of exit reason codes if available and the secondary LU that originated the exit Exit Exit reason descript
175. dataset Read the ERRNO for more information Couldn t obtain allocation attributes from output dataset Read the ERRNO for more information Couldn t read record size information from input dataset The dataset is probably corrupted The allocation of the output dataset returned a zero record length Please check the allocation parameter The requested record format for the output dataset is not supported Please check the allocation parameter An illegal record was detected in text mode The record exceeded the maximum record size allowed for the dataset The last record couldn t be written completely Read the ERRNO for more information Internal error Couldn t read certificate information The certificate is probably corrupted rvsMVS Messages and Codes 5 rvs Messages 4116003 4116004 4116005 4116006 4116007 4116008 4116009 4116010 4116011 4116012 4116013 4116014 4116015 4116016 4116017 4116018 4116019 4116020 4116021 4116022 4116023 4116024 KERNIE CERTMGMT INVALID CERT LENGTH IN GET CERT ARRAY KERNIE CERTMGMT NO MEMORY FOR CERT ARRAY IN GET CERT ARRAY KERNIE CERTMGMT COULD NOT READ CERT IN GET CERT ARRAY KERNIE CERTMGMT MISSING PARAMETER STRUC IN FILL CERT ATTR KERNIE CERTMGMT COULD NOT SET SUBJECTPUBLICKEYINFO KERNIE CERTMGMT COULD NOT SET COUNTRYNAME KERNIE CERTMGMT COULD NOT SET O
176. de and diagnosis code see chapter 6 of this manual nn INTERRUPT RECEIVED ON SESSION DATA This message is issued by the rvs X 25 CTCP task when an X 25 Interrupt packet is received on an active session The message shows the Logical Unit name and the station id of the virtual circuit on which the Interrupt was received and the data in the interrupt packet No action is taken when an interrupt packet is received nn DIAGNOSTIC RECEIVED CODE REASON This message is issued by the rvs X 25 CTCP task when a diagnostic packet is received from the IBM NPSI product The message shows the code and reason as received in the packet No further action is taken for this type of packet nn CLEAR CONFIRM RECEIVED This message is issued by the rvs X 25 CTCP task when an X 25 Clear confirmation is received The Clear confirmation is received in response to a previously issued X 25 Clear request rvsMVS Messages and Codes 5 rvs Messages DF9518P DF9519E DF95201I DF9521I DF9522W DF9523W DF9524E DF9525W nn CONFIRM RECEIVED ON SESSION This message is issued by the rvs X 25 CTCP task when an X 25 Clear or Reset confirmation is received on an active session The message shows the Logical Unit name and the station id of the virtual circuit on which the confirmation was received nn ERROR REPORTED FOR VC COMMAND REASON This message is issued by the rvs X 25 CTCP task when an
177. diagnosis codes xxxx xxxxxxxx see DFSMS MVS Diagnosis Reference dsname denotes the old data set name timestamp This message is followed by DATASET TARGET NAME dsname The message displays the new data set name of the failed rename DATASET GDG LOCATE RECOVERY NO NEW VERSION EXISTING The current GDG version could not be renamed cataloged rvs checks whether the current version of the GDG is still the highest version If the current version is not the highest rvs determines the next new version and tries to rename catalog this new version This message displays that recovery by increasing of the version number is not possible DATASET ALREADY CATALOGED dsname The received data set could not be cataloged after reception because a data set with identical name dsname already exists The data set will reside on disk under a temporary name with timestamp DATASET ALREADY CATALOGED AND NOT RE RENAMED RC DATASET NOT CATALOGED AND NOT RE RENAMED RC The received data set could not be cataloged after reception but has already been renamed to its final name While renaming it back to its temporary name an error occurred For return and diagnosis codes xxxx xxxxxxxx see DFSMS MVS Diagnosis Reference The data set will reside uncataloged under its final name on disk DATASET NOT UNCATALOGED dsname The temporary data set with timestamp dsname has been renamed to its final name but could not b
178. dump of the incore rvs sessions table The dump output of these commands is written as print only message message identifier DF1232P to the resource allocated with DD name SYSWTOxx to the rvs monitor depending on the content of member MSGIDxx of the rvs tables data set or to the resource allocated with DD name Y nnnnn number of Y command DF1232P text This message contains data which have been created by one of the commands Y STATIONS dump of the incore rvs stations table Y SESSIONS dump of the incore rvs sessions table The listing of rvs internal controlblocks may be useful in case of problem determination DF1233E SESSIONS TABLE DOES NOT EXIST The command Y SESSIONS has been entered This message indicates that the rvs internal sessions table does not exist and that this table cannot be dumped DF1234E STATIONS TABLE DOES NOT EXIST The command Y STATIONS has been entered This message indicates that the rvs internal stations table does not exist and that this table cannot be dumped should not occur error DF1237I Y FILE ACTIV The Y command has been entered Results of realize this command is written to Y file NOT CATALOGED DF1241W F sid dsn NOT UNCATALOGED RC xx yy NOT SCRATCHED A successfully sent data set should be deleted uncataloged resp a successful received data set should be cataloged The action failed xx denotes the return code hex of the SCRATCH CATALOG m
179. e b Message c Message d Message e Message f early time amp date station not found station not active access method not active same name tape disk conversion program running send request in hold state line already active BSC serialisation of datasets final station not active backup dataset has already been comletely transmitted for other DD commands prioriy value of dataset specify or default external KD dataset only DD sid E command serialisation of sending datasets external KD dataset only DD sid E command serialisation is on serialisation is off for active entry for used entry transmission in progress for completed entry transmission is finish is displayed if end of internal KD dataset is achieved is displayed if end of external KD dataset is achieved is displayed if internal KD dataset is empty is displayed if external KD dataset is empty is displayed if DD command has syntax error rvsMVS Messages and Codes 5 rvs Messages DF5212P DF5213P DF5214P DF5216P DF5218I DF5219I Message g is displayed if sid name was not found in stations table Message h is displayed if sid name exist in stations table but DD command has syntax error Message i is displayed if file name is incorrect for example wild card convention is not keep Message j is displayed if for specific request no entry exist in internal KD dataset
180. e of PDS transfer dsn is the physical name of a sequential work dataset unloaded PDS which is will be transmitted by rvs ESTRT ddd hh mm ss Earliest date and time for the transmission This parameter is only displayed for AS CS records RECL nnnnn Record length of the dataset only for fixed record lenth RU uuuuuuuu TU uuuuuuuu RACF and TSO userID CONV EXT OK ERR Shows the status the conversion part status OK conversion has finished without errors ERR conversion has finished with errors conversion has finished with errors rvsMVS Messages and Codes 5 rvs Messages DF50020 DF5003I DF5003I DF5005I DF50061I DF5007I COMP EXT OK ERR Shows the status the compression part status OK compression has finished without errors ERR compression has finished with errors compression has finished with errors SECR EXT OK ERR Shows the status the encoding part status OK encoding has finished without errors ERR encoding has finished with errors encoding has finished with errors TRACE nn Value of the internal trace parameter Comp Secr Parameter only for internal purposes JOB jobname Means after the termination of the transmission the job jobname is to be executed S sid QUEUE IS EMPTY The message appears as a reply to the command N sid Q and means that no send requests exist for this location N sid NO TRANSMISSIONS DURING LAST 24 H
181. e BTAM error recovery routine within rvs was entered This routine is entered in some cases independent whether an error has occurred or not an external trace entry was written IOSUBTASK ATT the subtask for data set IO was attached created IOSUBTASK DET the subtask for data set IO was detached deleted For some of these events additional information may be displayed REQ ISSUED or REQ COMPLETE indicates whether the request event was issued or has In case of a completed request a returncode may be displayed RC xx completed U ORT U ORT U ORT U ORT U ORT U ORT U ORT U ORT U ORT DF018A DF018A DF018A DF019A DF019A DF019A DF130B DF130B DF130B COMPUST SET OFF ON COMPVST SET OFF ON COMPTFR SET OFF ON GPF7UST SET OFF ON GPF7VST SET OFF ON GPF7TFR SET OFF ON INCLUST SET OFF ON INCLVST SET OFF ON INCLTFR SET OFF ON Display of internal flags trace for ULS These messages are displayed at start of rvsMVS For internal use only U ORT U ORT CHECK SMF SVC MODUL xxxxxxxx QNAMES RNAMES RC xxx These messages are displayed at start of rvsMVS For internal use only F sid AUTODIAL REJECTED ISTATUS INACTIVE A request to establish a connection with station sid has been rejected because the stations entry is not released until now ISTATUS can be changed dynamically by the Operator see rvs Operations Manual if necessary X sid via sid2 BTAM XX 4 t tele
182. e commands MSG DISPLAY or MSG SETDEF has been entered The command MSG SETDEF first resets the functions to the defined default message subsets The message shows which message subsets are currently assigned to the different functions CS suppression of console messages RS suppression of messages for remote operating session CD display of console messages RD display of messages for remote operating session DF30401I MSGOUT PROCESSED This message is displayed in response to the operator command MSGOUT output of SYSWTO messages and Dumps allocated to the DD Names rvsDUMP and SYSUDUMP before monitor end Please refer to OPERATIONS MANUAL The message is displayed as first message in the splitted output DF3041I LOCAL SID sid CURRENT RELEASE x y MODIFICATION LEVEL nn The message displays the actual rvs software version after start of the rvs Monitor x denotes the release y denotes the subrelease and nn denotes the modification level within the subrelease This information is useful in case of problem determination The message is also displayed as response to the command DB In this case the own rvs station ID sid is additionally displayed DF3042W RECEIVE VOLUME EXCLUSIVE WITH UNIT PARAMETER INPUT IGNORED rvsMVS Messages and Codes 5 rvs Messages The rvs command VOLUME value has been entered During start of rvs the rvs start parameter VOLUME was not specified In this case it is not possible t
183. e connection will be terminated The socket number and the entry point address are displayed A IP ADDRESS HEEL PORT rvsMVS Messages and Codes 5 rvs Messages DF8366E DF8367P DF8368P DF8369P DF8370E DF8371P DF8372P DF8373W DF8374P This message is issued by the rvs TCP IP task when the open process has completed This message displays the own IP address and the own port number READ ERROR DETECTED LENGTH NOT POSITIVE This message is issued by the rvs TCP IP task when a read macro is to be issued The specified length is not positive the session will be terminated as a result of this error which should not occur NO ACTIVE SCT ENTRY FOUND TCB FOR SOCKET CLEARED This message is issued by the rvs TCP IP task when an tcb has been found and no appropriate sct entry exists ACTIVE ODETTE TASK HAS BEEN DETACHED S SID This message is issued by the rvs TCP IP task when an active OFTP task has been detached ODETTE TASK NOT RESPONDING WILL BE CANCELLED S SID This message is issued by the rvs TCP IP task when the ODETTE task is not responging any more It will be detached MAX LENGTH FOR READ EXCEEDED REDUCED TO 32767 This message is issued by the rvs TCP IP task when a read macro is to be issued The length of the expected data as indicated in the 4 byte header field exceeds the maximum value of 32767 It will be reduced to this max v
184. e control data set shows a complete transmission of the data set dsname R sid 111 RESPONSE QUEUED DSN data set name The response to the sender is generated after complete receiption of a data set f sid lll text see message DF1602E f sid 111 LINE I O ERROR SYNCHRONIZATION WITH REMOTE STATION NOT ESTABLISHED It has not been possible to establish synchronization with the remote station on a leased line The monitor repeats the attempt f sid lll FILNAL STATION sid2 BUT NO VALID ENTRY IN STATIONS TABLE The station sid received a data set After receiving this data set should be transmitted to a third station with station sid2 but for the third station there is no valid entry in the stations table f sid 111 i RECORD RECEIVED DSN dsname DSTIME time f sid 111 i RECORD HAS BEEN SENT DSN dsnameDSTIME time rvsMVS Messages and Codes 5 rvs Messages The received or transmitted rvs protocol records will be noted in the printout WwAcks DF5637P f sid lll xx TTDS RECEIVED srxETX Since line control has been established the remote station has transmitted xx control character until now WACKS TTDS STXETX DUMMY record This fact indicats that the remote station is not able to transmit or receive data at this time but the remote station wants to keep line control DF5638P f sid NO RESERVED VOLUMES NEEDED This message appears if the TP task recognizes an interlock situation timeout may occ
185. e data set has been transmitted f sid CALL OF ACCOUNTING USER EXIT INITIATED f sid CALL OF ACCOUNTING USER EXIT COMPLETE Indication for the call of the user accounting exit I sid NO SMF RECORD WRITTEN The User SVC designed to write SMF records returned with a non zero return code I sid INVALID START TIME An entry of the control data set relating to a data set which is to be transmitted contains an invalid start time I sid dsname SMF RECORD WRITTEN An SMF record has been written after receiving or transmitting a data set The dsname is related to this data set I sid NO SMF RECORD WRITTEN BECAUSE OF MISSING DATA No SMF record was written because no byte of the data set has been transmitted S sid mn TRANSMISSION OF dsname REJECTED BECAUSE OF EXIT DFUXO001 The user exit DFUX001 has been terminated with a non zero return code there is no authorization to transmit the data set dsname to station sid As a result the status of the transmission request specified in an entry of the control data set will be changed to the HOLD Status immediately For a description of this exit see Installations Manual Appendix A S sid mn text This message appears if the exit DFUX001 terminates with a return code of 8 text is a message of equal or less 80 characters which is passed to rvs by the exit DFUX001 S sid mn ENQ USE RETURNCODE xx DSN dsname rvsMVS Messages and Codes 5 rvs Messages DF160
186. e is issued by the rvs X 25 CTCP task when no response on outgoing call is received The message shows the failing request the Logical Unit that issued the request and and the station identification If a VTAM request fails for the X 25 link Logical Unit the CTCP task will start termination DFOOO2I nn CTCP 2 LV2 This message is issued by the rvs X 25 CTCP task in response to a STATUS CTCP command The message shows the status ACB name used by the CTCP task and the name of the local unit used for X 25 link communication Also the packet size and windows size used for the X 25 connection is shown DF0O101I T sid TRACE STOPPED ALLOCATION ERROR CODE xxxx An error occurred during allocation of the trace data set The DYNALLOC macro returned with the code xxxx This code is described in OS VS2 MVS SPL Job Management DF0200I SUBTASK STARTED FOR LU luname CID cid A subtask has been started to terminate the VTAM session LU luname ClD cid This may be necessary if the transmitting or receiving program is not able to terminate the session itself e g an ABEND has occurred or the command B sid was entered cnspsT DF0201E 4 TERMSESS ISSUED FAILED FOR LU luname RC xx yy FDBK zz lsEssronc The message describes if the termination of the session to the logical unit represented by luname has been successful or not The meaning of the codes is Xx yy register 15 register 0 zz
187. e not in effect for users purpose DF94A5E Z ORT ACCM SESSID rvsMVS Messages and Codes 5 rvs Messages This message contains additional information to message DF9457E update send request failed rvsMVS Messages and Codes 5 rvs Messages This page will be intentionally empty rvsMVS Messages and Codes 5 rvs Messages Messages of the X 25 Control Task DF95011I DF9502P DF9503E DF95041 DF9505E DF9506E DF9507E DF9508P This message is issued by the rvs X 25 CTCP task when task initialization is complete nn states the CTCP number LV denotes to the current program version of program DF095A This message is issued by the rvs X 25 CTCP task when task termination has started or is complete nn rvs X 25 CTCP ABEND CODE EP PSW This message is issued by the rvs X 25 CTCP task when an abend occurs The message shows the system abend code the entry point of the program and the address where the abend occurred When an abend occurs task termination will be done after all subtasks has been terminated This message is issued by the rvs X 25 CTCP task when a VTAM exit has been scheduled The message is only issued if trace for the X 25 link Logical Unit is active unless the TPEND exit is scheduled Scheduling of the TPEND exit will always be reported nn ACB OPEN FAILED ACB RSN This message is issued by the rvs X 25 CTCP task when open of the ACB to use for VTAM communicati
188. e program DFO56Bxx During initialization of a transmission the BTAM line control was not able to switch from receive to send by RESETPL This ABEND is coded in the program DFO56Bxx The program profile specified does not exist in the member PROGPROF of the rvs TABLES Data Set This ABEND is coded in the program DFO56Bxx Error during update the rvs control data set This ABEND is coded in the program DFO56Bxx Too many stations defined for a line Should not occur error This ABEND is coded in the program DFO58Axx During the initial phase of the RJE protocol no related entry could be inserted in the rvs control data set No program output is send back This ABEND is coded in the program DF059OCxx The rvsMVS monitor is searching for a disk UCB but no disk UCB has been found This ABEND is coded in the program DFO59Cxx During the termination of a transmission the transmission related active rvsMVS Messages and Codes 3 rvs Abend Codes 640 645 646 650 660 661 740 745 746 750 760 762 763 764 280 285 286 28A 294 295 2E4 2E9 2EA 2EE 2F8 2FA 2FB 2FC send request record must be updated but an error occurred in this situation An error occurred during access to the rvs Key Data Set A MODCB GENCB or SHOWCB macro could not be executed or the control data set could not be opened This abend may occur if a new Key Data Set has been created but no
189. e requested certificate Please check your configuration or import the right certificate Couldn t read the whole certificate from the VSAM certificate store The record may be corrupted Check the dataset or import the certificate again Couldn t convert the read certificate into internal format Read the cryptlib error code to get more information Couldn t write the certificate into the VSAM certificate store The certificate already exists Error during writing the certificate into the VSAM certificate store Read the ERRNO for more information The certificate couldn t be updated since it wasn t found in the VSAM certificate store Couldn t read the whole certificate before update from the VSAM certificate store The record may be corrupted Check the dataset or import the certificate again Error during updating the certificate into the VSAM certificate store Read the ERRNO for more information The certificate couldn t be deleted since it wasn t found in the VSAM certificate store Error during deleting the certificate Read the ERRNO to get more information Couldn t close the VSAM certificate store Read the ERRNO to get more information Couldn t open the VSAM certificate store Read the ERRNO to get more information Couldn t open the certificate dataset Read the ERRNO for more information Couldn t read certificate dataset attributes Read the ERRNO for more information The record length of the certifi
190. e transmitted via rvsMVS FTP FTP Server Task Origin data set not found A data set is to be transmitted via rvsMVS FTP FTP Server Task checking of HFID record Invalid syntax A data set is to be transmitted via rvsMVS FTP FTP Server Task checking of HFID record Invalid origin A data et is to be transmitted via rvsMVS FTP FTP Server Task checking of HFID record Invalid destination rvsMVS Messages and Codes 2 rvs User Codes 172 176 180 188 192 196 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 OAC OBO 0B4 OBC 0CO 0C4 0C8 0C9 OCA OCB OCC OCD OCE OCF ODO 0D1 0D2 0D3 0D4 0D5 0D6 0D7 A data set is to be transmitted via rvsMVS FTP FTP Server Task checking of HFID record maximal length of record not supported A data set is to be transmitted via rvsMVS FTP FTP Server Task checking of HFID record data set already catalogued A data set is to be transmitted via rvsMVS FTP FTP Server Task checking of HFID record unspecified reason A data set is to be transmitted via rvsMVS FTP File open error A data set is to be transmitted via rvsMVS FTP Allocations control file s error A file is to be sent using the Odette File Transfer Protocol OFTP The local own station has initiated the connection to the remote station But sending of the file is not possible because the remote stati
191. e uncataloged rvsMVS Messages and Codes 5 rvs Messages DF1244P DF1245P DF1246P DF1247P DF1249P DF1302E DF1411P DF1412P DF1501A DF1504P R ORT REMOTE JOB name NOT AUTHORIZED NOT SUBMITTED R ORT EFFECTIVE SPEED BPS Messages DF1244P DF1245P are for possible error detection only They are not in effect for users purpose X ORT 7 7 7 2 2 7 7 2 7 2 2 7 2 2 2 7 12345678901234567890123456789012345678901234 Messages DF1246P is used for different purpose One is to inform about ENQ for GDG handling If resource isn t available the task will wait 1 second and try it again up to 20 times ENQ ISSUED FOR name GDG ENQ issued for a GDG name ENQ FOR DATASET IN USE SET TIMER ENQ for a dataset name is in use this task will wait GDG ENQ RESSOURCE NOT AVAILABLE Couldn t get ENQ for a dataset name All other Messages of DF1246P are for possible error detection only They are not in effect for users purpose R ORT text name R ORT LOG ENTRY LG FOR name Messages DF1247P DF1249P are for possible error detection only They are not in effect for users purpose RVS BUFFER QUEUE LOCKED FOR MORE THAN XXX MINUTES RESTART OF MONITOR REQUIRED The internal buffer queue was not released as intended possibly because of a module ABEND occured Monitor must be stopped and restarted in order to solve this problem RVS VERSION HAS CHANGED UPDATE OF RR ENTRIES STARTING U
192. eceived direction and the dataset name dsn F sid accm sessonid task name SEND DATA FLUSHED DUE TO LOCKED SERVER QUEUE This message is issued by the Odette File Transfer Protocol task when data to be sent to the network server was rejected due to a locked server queue ie the nerwork server was not ready to accept the request In the message is indicated the task name F sid accm sessonid TOO MANY ERRORS DETECTED SESSION WILL BE rvsMVS Messages and Codes 5 rvs Messages TERMINATED This message is issued by the Odette File Transfer Protocol task when an internal limit of error numbers has exceeded As a result of this situation the OFTP session will be terminated abnormally This error may occur if rvs receives an SFID protocol unit but for some reasons responds with an SFNA protocol unit If the remote station repeates this sequence without any retry time between the different attempts rvs will terminate the connection to avoid a loop situation DF9427P DF9427P S ORT ACCM SESSID FILEDESCRIPTION RECEIVED NOT SUPPORTED A SFID FPDU has been received OFTP V2 0 The SFID includes a file description but receiving of file description is not supported The transmission will be rejected DF9428E Z ORT ACCM SESSID MAX RECORD LENGTH EXCEEDED TEXT FORMAT A File is to be received with FORMAT TEXT The sender of the file transmitted a record which exceeds the maximal record length The transmission will be rejected
193. ecord length not supported 06 File size is too big 10 Invalid record count 11 Invalid byte count 12 Access method failure 13 Duplicate file 99 Unspecified reason DF8890I D sid sesid FILE DSORG NOT PS SEND REQUEST NOT ACCEPTED The FTP Client Task issues this message when send file has PDS organisation RVS MVS FTP not support PDS files DF8898P D sid sesid KDUPDAT 88F xxxxxxxx TYP xx The FTP Client Task issues this message List internal action of FTP Driver task with KD control file For internal use only rvsMVS Messages and Codes 5 rvs Messages DF8899P DF88A0P DF88A1P DF88A2P DF88A3P DF88A4P DF88A5P DF88A6P DF88A7P DF88A8P DF88A9P DF88BOP DF88B1P DF88B2P DF88B8P DF88B3P DF88B4P DF88B5P DF88B6P DF88B7P DF88BAP DF88V1W DF88V1W DF88V1E DF88V2W DF88V3W DF88V4E D sid sesid xxxxxxxx nnnnnn nnnnnn The FTP Client Task issues this message routine Shows is the name of FTP Client Task subroutine that gets control For internal use only D sid sesid CS RECORD FOUND DSN dsname D sid sesid NO CS RECORD FOUND DSN dsname D sid sesid ORIGIN STATION KNOWN D sid sesid SENT DSN dsname D sid sesid MESSAGE REQUESTED D sid sesid EEIDDSN dsname D sid sesid EEIDORIG odette id of sender of EEID D sid sesid EEIDDEST odette id of recipient of EEID D sid sesid EEIDDATE date EEIDTIME time x ox The F
194. ect failed Function getPrivateKeyTokenByLabel failed Function getPrivateKeyTokenByla failed Function getPrivateKeyTokenBySubject failed Could not export certificate Could not export certificate by id Could not get RSA factor information Could not allocate structures ICSF function CSNDPKB failed CALL ICSF function CSNDPKB failed RESULT ICSF function CSNDPKD failed CALL ICSF function CSNDPKD failed RESULT ICSF function CSNDPKE failed CALL ICSF function CSNDPKE failed RESULT ICSF function CSNDDSG failed CALL ICSF function CSNDDSG failed RESULT rvsMVS Messages and Codes 5 rvs Messages 4226001 4226002 4226003 4226004 4226005 4226006 4226008 4226009 4226010 4226011 4226012 4226013 4226014 4226015 4226016 4226017 4226018 4226019 HSMUTIL ERR INVALID KEY INFO HSMUTIL ERR GENERATE RANDOM HSMUTIL ERR LOAD DLL HSMUTIL ERR FUNC GSK OPEN KEYRING HSMUTIL ERR FUNC GSK CLOSE DATABASE HSMUTIL ERR FUNC GSK GET RECORD LABELS HSMUTIL ERR FUNC GSK EXPORT CERTIFICATE HSMUTIL ERR FUNC GSK DECODE CERTIFICATE HSMUTIL ERR FUNC GSK FACTOR PUBLIC KEY RSA HSMUTIL ERR FUNC GSK FREE BUFFER HSMUTIL ERR FUNC GSK GET RECORD BY LABEL HSMUTIL ERR FUNC GSK GET RECORD BY SUBJECT HSMUTIL ERR FUNC GSK FREE RECORD HSMUTIL ERR FUNC GSK ENCODE NAME HSMUTIL ERR FUNC GSK DECODE NAM
195. ed invalid facility values timeout occured called number unknown calling number unknown unknown error XXXXX If X 25 causes and diagnostics are available for the message the message is extended by X 25 cause XXX X 25 diagnostic XXX This message is issued by the rvs XOT task in response to a Display DS command The message shows the status of XOT listener Sequencenumber x25 Address Messages of the SNA LU6 2 Control Task DF9701I DF9702I rvs APPC INITIALIZATION COMPLETE This message is issued by the rvs APPC task when initialization is complete This message is issued by the rvs APPC task when task termination has started or is complete rvsMVS Messages and Codes 5 rvs Messages DF9703E DF97041I DF97051I DF9706E DF9707E DF9708E DF9709E DF9710E rvs APPC ABEND CODE EP PSW This message is issued by the rvs APPC task when an abend occurs The message shows the system abend code the entry point of the program and the address where the abend occurred When an abend occurs task termination will be done after all subtasks have been terminated REGS 0 7 DOXXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX This message is issued by the rvs APPC task when an abend occurs The message shows the content of the registers 0 to 7 at the time of abend REGS 8 15 xxxxxxxx XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX This message is issued by the r
196. empt an automatic restart for this data set R sid lll REMOTE BCC xxxx LOCAL BCC yyyy TEXT text rvs stations MVS VSE and DOS check transmitted data by a self computed block check character 2 bytes Each line block of type D contains at the end the BCC computed by the transmitting station The receiving station itself computes a BCC and compares both If the remote and local computed BCC are not equal this message appears at the receiving local station The line block will be transmitted once more Ill line address XXXX block check character of the transmitting station yyyy block check character of the receiving station text first bytes of the line block in hex f sid 111 RVI SENT In some cases the receiving station sends a RVI sequence if the transmission is cancelled by operator or if an error occures in the receiving subtask rvsMVS Messages and Codes 5 rvs Messages DF5617P f sid dddd xxxx TEXT yyy After line faults the DECB xxxx and the start of the data area yyyy for the line is indicated dddd indicates a displacement to the beginning of the line control program NEGATIVE ACK DF5618E f sid 111 TIMEOUT p LOST DATA RETRY A CONNECTION LINE I O ERROR The transmission of a block is faulty in spite of repeated attempt The data connection is interrupted If the error occures several times the connection should be redialed on switched lines NEGATIVE ACK The remote sta
197. er is ignored WARNING VIRTUAL STATION ONLY SUPPORTED FOR ACESS METHODS X25 LU62 TCP IGNORED FOR SID XXX The station parameter STAT VIRT found in station entry for SID xxx but the virtual station is available only for access method X25 LU62 and TCPIP The parameter is ignored WARNING USER STATIONS ONLY SUPPORTED FOR ACESS METHODS X25 LU62 TCP IGNORED FOR SID XXX The user stations parameter USR YES found in station entry for SID xxx but the user station is available only for access method X25 LU62 and TCPIP The parameter is ignored WARNING TRANSFER RESTRICTION ONLY SUPPORTED FOR ACCESS METHODS X25 LU62 TCP IGNORED FOR SID XXX The transfer restriction parameter TFR YES found in station entry for SID xxx but the transer restriction is available only for access method X25 LU62 and TCPIP The parameter is ignored WARNING USER LEVEL SECURITY SECURITY ONLY SUPPORTED FOR ACESS METHODS X25 LU62 TCP IGNORED FOR SID XXX The ULS user level security ULS YES found in station entry for SID xxx but the user level security is available only for access method X25 LU62 and TCPIP The parameter is ignored WARNING USER LEVEL SECURITY NOT INCLUDED IN CURRENT LICENCE KEY IGNORED FOR SID XXX The ULS user level security ULS YES found in station entry for SID xxx but the user level security is not included in current licence key The parameter is ignored WARNING USER SEPARATION NOT USED SEE CNTL MEMBER
198. eration failed 16 CRYPT_ERROR_INTERNAL Internal consistency check failed 20 CRYPT ERROR NOTAVAIL This type of operation is not available 21 CRYPT ERROR PERMISSION No permission to perform this operation rvsMVS Messages and Codes 5 rvs Messages 22 CRYPT ERROR WRONGKEY Incorrect key used to decrypt data 23 CRYPT ERROR INCOMPLETE Operation is incomplete or still in progress 24 CRYPT ERROR COMPLETE Operation is complete and cannot continue 25 CRYPT ERROR TIMEOUT Operation timed out before completion 26 CRYPT ERROR INVALID Invalid or inconsistent information 27 CRYPT ERROR SIGNALLED Resource was destroyed ba an external event 30 CRYPT ERROR OVERFLOW Resources or space exhausted 81 CRYPT ERROR UNDERFLOW Not enough data available 32 CRYPT ERROR BADDATA Bad or unrecognized data format 33 CRYPT_ERROR_SIGNATURE Signature or integrity check failed 40 CRYPT_ERROR_OPEN Cannot open the object 41 CRYPT_ERROR_READ Cannot read item from object 42 CRYPT_ERROR_WRITE Cannot write item to the object 43 CRYPT_ERROR_NOTFOUND A requested item wasn t found in the object 44 CRYPT_ERROR_DUPLICATE The item is already present in the object 50 CRYPT_ENVELOPE_RESOURCE More resources are needed to proceed HSM PKCS 11 error codes 4211001 4211002 4211003 4211004 4211005 4211006 4211007 4211008 4211009 4211010 4211011 4211012 4211
199. ered But the rvs VTAM subtask cannot be started without session table Either member SESSIONS of the rvs Tables Dataset see Installations Manual is empty or does not exist or the DD name SESSIONS within the rvs start procedure is assigned to another empty dummy file As a result of this the rvs VTAM subtask cannot be started support of SNA sessions by rvs is impossible unless the rvs Sessions Table is correctly created and assigned to the rvs start procedure STOP DF90281 VTAM SUBTASK OF rvs WILL CLOSE BECAUSE OF VTAM QUICK STOP CANCEL J CONTINUE CURRENT TRANSMISSION WILL BE CANCELLED BE BROKEN J The operator stopped VTAM by entering a HALT NET command or VTAM stopps because of an error or the operator has entered a VARY NET INACT command for the VTAM application rvs In case of a normal stop all transmissions will be completed in case of a quick stop the transmissions will be terminated If the command HALT NET CANCEL has been entered the rvs VTAM control task will be stopped at once action like the rvs command B rvsVTAM DF9028A ENTER A rvsV AFTER RESTART OF VTAM After VT AM has been started again or after entering VARY NET ACT for application rvs the connection to VTAM can be reestablished by entering A rvsVTAM DF9029E A sid mn SUBTASK DID NOT START WILL BE DETACHED For explanation see message DF9023E The only diffrerence is that the remote station tried to establish a session DF90301I F s
200. erent The content of real FTP file is moved to new file with rvsMVS SMS parameters rvsMVS Messages and Codes 5 rvs Messages This page will be intentionally empty rvsMVS Messages and Codes 5 rvs Messages Messages of the FTP Polling Task STARTED DF8600I FTP POLLING TASK 1 b VERSION vvv STOPPED dd mm yy tt mm aa bb cc Start or stop message of FTP Polling Task This program is started direct after start of the FTP Main Task vvv specify version of FTP Polling Task dd mm yy tt mm time of assembly aa bb cc time of last changes in the FTP Polling Task DF8607P RVSMVS FTP FILES FOUND The FTP Polling Task issues this message when FTP control file s is are found List of FTP control file s following in the message s DF8613P DF8613P A file name volser The FTP Polling Task issues this message when FTP control file s is are found The message contains dsn of FTP control file and volser DF8617P RVSMVS FTP NO SEARCH FLAG FTPFLGHD ON The FTP Polling Task issues this message when FTPPOLTI time interval is elapsed but not all files from last polling search are serviced DF8701I F sid APPC DRIVER INITIALIZATION COMPLETE LU MODE 7 This message is issued by the rvs APPC driver task when task initialization is complete for the partner station sid DF8702I F sid APPC DRIVER TERMINATION COMPLETE LUz MODE 7 7 This message is issued by the rvs A
201. ession number DYNALLOC ERROR XXXX YYYY FOR TRACE DATASET The message shows the error and info code of allocation of trace data set OPEN ERROR FOR TRACE DATASET The trace data set could not be open BUFNO nn STORAGE aaK UNUSED bbK EXCNT cc The message is displayed as response to the command DS BFPOOL or DS BFPOOL ALL Starting with version 2 2 05 rvs uses an own bufferpool for the OFTP components X 25 LU6 2 and TCP IP This bufferpool shall help to improve performance by reducing system services GETMAIN and FREEMAIN The bufferpool includes buffers which are not longer used but which might be requested at a later time nn denotes the number of unused buffers within the rvs internal bufferpool aa denotes the amount of storage occupied by all unused buffers of the pool ob denotes the storage which is still available for the bufferpool and cc denotes the count for execution of the bufferpool service routine NUMBER ADDRESS BF SIZE CR TIME LU TIME USE CNT The message is displayed as response to the command DS BFPOOL ALL A detailed statistic is displayed for the rvs internal bufferpool For each buffer of the bufferpool the current buffernumber the storage address the buffersize in bytes the time since creation of the buffer in seconds the time since last usage of the buffer in seconds and the usecount of the buffer is displayed in one row rvsMVS Messages and Codes 5
202. ethod acme the user exit DFUX001 has terminated with a non zero return code there is no authorisation to transmit the dataset dsn to station sid For a description of exit DFUX001 see rvsMVS rvsMVS Installations Manual Appendix A As a result of the rejection the send request will be set into HOLD status immediately DF5206E S sid acme nm text This message appears if the exit DFUXOO1 terminates with a return code of 8 for send session nm to station sid and access method acme text is a message of equal or less 80 characters which is passed to rvs by the exit DFUX001 DF5207P S sid acme nm ENQ USE RETURNCODE xxx DSN dsname This message appears only within the rvs protocol It indicates for send session nm to station sid and access method acme execution of an ENQ macro which is used for serialisation of datasets to be sent rvsMVS Messages and Codes 5 rvs Messages DF5208P DF5209P DF5210P DF5211I DF5211P S sid acme nm DEQ HAVE RETURNCODE xxx DSN dsname This message appears only within the rvs protocol It indicates for send session nm to station sid and access method acme execution of a DEQ macro which is used for serialisation of datasets to be sent LIST OF SEND REQUESTS REFRESHED tttt tt iii jjj xxxx yyyy LIST OF EERP REQUESTS REFRESHED tttt tt iii jjj xxxx yyyy The dispatcher subtask looks within a defined time interval for send requests EEPR within the rvs contr
203. ew transmission is required R sid mn RESTART COUNT EXCEEDS DATA SET RECORD COUNT In the header record the transmitting station specified a restart count which exceeds the number of received data records R sid mn dsname volume RESTARTS AT RECORD n Start message for the specified data set In case of a restart this message remains on screen until restart positioning of the data set has been completed R sid mn DELETING EXISTING FILE BECAUSE OF SPECIFIED EXPIRATION DATE A restart for a file with an expiration date is to be done But the extension of an existing file with expiration date requires operator intervention To avoid this the restart file will be deleted IDCAMS command DETETE dsn PURGE and the transmission will be cancelled The file then will be transmitted again with the next restart attempt R sid mn EXPECTED LINE BLOCK NUMBER IS nnnn RECEIVED LINE BLOCK NUMBER IS mmmm An error has been detected within the sequence of transmitted line blocks R sid mn al a2 bl b2 The following counters are listed after receiving a data set al number of the received data records a2 number of data records transmitted by the remote station b1 number of the received characters b2 number of characters transmitted by the remote station R sid mn REQ SPACE n BLOCKS NOT AVAILABLE Additional information to DF3702E The output data set could be allocated because the required space of n BLOCKS was not available Norm
204. expire in xxx days License key will expire in xxx days Please contact your software distributor DF3055I A sid XXXXX ACTIVATION REJECTED ISTATUS INACTIV ISTATUS INACTIVE has been specified for station entry sid Change this parameter to ISTATUS ACTIVE within the STATIONS table x 25 cTCP DF3056P nn RE ACTIVATION OF rvs Hh SUBTASK STARTED tcp ip J The rvs X 25 CTCP subtask nn or the TCP IP controltask for stack nn has ended abnormally An automatic re activation attempt is initiated In case of failure it is repeated once per minute until activation is successful or a stop command for this control task is entered rvsMVS Messages and Codes 5 rvs Messages DF3057E DF3059I DF30601I DF3061W DF3062W DF3062W F SID CMD NOT EXECUTABLE STATION NOT DIRECTLY CONNECTED A command for station sid e g A sid or T sid has been entered This command is not executable because the specified station is not directly connected but may be accessed via a relay station Command X sid may be used to display via which other station the specified station sid is connected In this case commands like activate stop trace etc are valid only for the directly connected relay station SPECIFIED STATION sid ALREADY ACTIVE The message occurs if the command A sid for a X 25 station has been entered and the specified station is already active SPECIFIED STATION sid NO SCT ENTRY FREE
205. f a station is connected A IP ADDRESS MISSING GETHOSTBYNAME ACTIVATION REJECTED This message is issued by the rvs TCP IP task when an activation command is to be executed The IP address of the remote station is not available not defined within stations table or not available by a name server The activation is rejected ACTIVATE REJECTED FOR STATION ISTATUS INACTIVE This message is issued by the rvs TCP IP task when an activation command is rejected due to the initial status INACTIVE of the stations entry Set the status to ACTIVE COMMAND REJECTED TERMINATION OF rvs TCP IP IN PROGRESS This message is issued by the rvs TCP IP task when an activate command has been entered but termination of the rvs TCP IP task has already started UNSOLICITED EVENT OCCURRED RC TCP IP ADDRESS SPACE HAS TERMINATED This message is issued by the rvs TCP IP task when the unsolicited event exit is driven by the TCP IP address space The TCP IP address space has terminated RC shows the invocation reason of the event 1 TCP IP address space has terminated TCPEND 2 TCP IP address space has terminated the connection to the user TCPCONEND 4 Other call the IBM support center LOCAL IP ADDRESS TCPLOCAD ipaddress INVALID This message is issued during start of the rvs TCP IP control task The specified local ip address parameter TCPLOCAD is not valid for this host bind error number 49 The TCP IP control task will terminate after
206. f sid i dsname QD yyddd QT hhmmsst st RE QT ddd hh mm ddd hh mm nnnnnn bbbb bbbMB P nnn ler ar ser DS dsn ESTRT ddd hh mm RECL nnnnn RU uuuuuuuu TU uuuuuuuu JOB jobname CONV EXT OK ERR COMP EXT OK ERR SECR EXT OK ERR TRACE nn This message appears after different display commands The display of the parameters changes due to availability and the entered display command f the message is related to files queued for transmission R the message is related to files which have been received S the message is related to files which have been transmitted i C entry deleted by operator D sid D entry and data set deleted by operator H for send requests transmission is on hold state Two causes are possible An error has occurred or H sid was entered by the operator In this case the transmission is only started when the S sid dsname command is explicitely entered by the operator For end to end responses EERP EERP is in hold state because an attempt to send the EERP failed A next attempt will be done if the time for the holdreset interval is over I query I record transmitted to remote station but no answer A record received yet After a transmission error S sid dsname must be used for explicit start J a job for further processing has been started jobname is indicated in subsequent line S indicates that the start of the transmission for a file to be sent is initiate
207. f the command D sid S R all NN entries were found This message is followed by DF2590I D sid CONFIRM DELETE REQUEST DEL OR NO After input of the command D sid S R ALL and display of message DF2580l rvs is asking for a confirmation to delete all specified entries Following replies are possible DEL Entries will be deleted NO Entries will not be deleted R sid DS EXTENSION CODES aa bb cccc dddd ee ff gggg hhhh ii jj kk 11 mm nn During reception of a file an already existing data set with the same name is to be replaced replace function During start of reception rvs checks whether the already existing file has sufficient space to store the file to be received If the already existing file does not contain enough space rvs tries to extend this file allocation of an extended new file on the same disk volume with new name deletion of the old file rename of the new file This message indicates various error codes which may occur during these activities During checking whether there is enough space the following codes are used aa returncode reg 15 of obtain macro read format1 DSCB bb returncode reg 15 of volume allocation cccc dynamic allocation error reason code volume allocation dddd dynamic allocation error info code volume allocation ee returncode reg 15 of obtain macro read format3 DSCB During extension of the existing file the following codes are used ff returncode reg 15 of new file a
208. fication phase has been completed successfully DF55061I f sid lll TRANSMISSION ENDED The transmission s with the corresponding station sid on line Ill has ended After display of this message the line error block LERB is will be displayed and e the line control program will stop if a stop command has been entered for this line previously or e the line control program is waiting for the next data traffic indicated by display of message DF5503 DF5507E f 111 111 LINE IS NOT DEFINED WITHIN STATIONS TABLE An activation command for line Ill has been entered but there is no line entry for the switched line Ill within the rvs stations table The line control will be terminated with user code 100 after this message DF5508E f 111 111 NO PROGRAM PROFILE FOUND FOR THIS LINE rvsMVS Messages and Codes 5 rvs Messages An activation command for line III has been entered but the program profile defined for this line rvs stations table has not been found within the rvs program profile table The line control will be terminated with user code 100 after this message DF5509E f sid lll PROGRAM PROFILE ppp NOT FOUND A line connection with station sid on line Ill has been established During identification phase the program profile ppp defined for station sid is used but this profile is not defined within the rvs program profile table The line connection with station sid will be broken after
209. h an R record response record If this R record has been accepted by the transmitting station the disposition the status of the send request entry of the control data set changed from active to complete The disposition specified in the send request entry related to the transmitted data set will be performed The data set is either held on disk uncataloged or deleted S sid dsn TRANSMISSION ENDED WITH ERROR The dataset dsn has been sent to station sid After this the termination routine is entered This routine checks the the completeness of the transmission and performs if the transmission was complete the dataset disposition In this case an error has been detected by the termination routine One reason may be that the receiving station has indicated that the transmission was not ok This message indicates that an error has occurred and that the dataset must be retransmitted S sid UNEQUAL BLOCK NUMBER S sss R rrr sss blocks have been transmitted and rrr blocks are confirmed by the receiver In order to eliminate the error all active control data set entries at the receiver and transmitter which rvsMVS Messages and Codes 5 rvs Messages DF5907W DF6101I DF6102E DF6103E DF6104E relate to the data set in question must be deleted This can be done by entering the commands D sid S dsname D sid R dsname In order to get confirmed the deletion enter the commands N sid Q name or N sid R
210. he file input buffer Ensure that the whole address space and enough memory is available You may wait until another process has finished and freed its memory The requested cipher suite is unknown Pleas check the input parameter Internal error Couldn t obtain enough memory to create the main parameter area Ensure that the whole address space and enough memory is available You may wait until another process has finished and freed its memory Couldn t obtain enough memory to create the I O data area Ensure that the whole address space and enough memory is available You may wait until another process has finished and freed its memory Couldn t obtain enough memory to create the error information area Ensure that the whole address space and enough memory is available You may wait until another process has finished and freed its memory Couldn t obtain enough memory to create the P15 keystore data area Ensure that the whole address space and enough memory is available You may wait until another process has finished and freed its memory Internal error The requested code translation table wasn t set Please check the configuration of the code translation table Couldn t open the external configuration dataset Internal error The name of a required dataset is missing Please check your configuration and ensure that all parameter are set The input dataset couldn t be opened Read the ERRNO for more information
211. he remote station f sid mn EERP SENT RECVD DSN dsname QD date QT time An end to end response has been sent to received from station sid The message displays the related datasetname dsn and the queuing date and time of the related file End to end responses are used for transmissions which run at least via one or more relais stations The message displays the flow of an EERP and is used for problem determination only f sid mn r RECORD RECEIVED TEXT text A rvs control record which has been received from the remote station is displayed on print output f sid mn r RECORD HAS BEEN SENT TEXT text The transmission of a rvs control record type r is displayed on print output f sid mn command This message is to be displayed in response to an entered command F ORT MO dsn SET IN OPERATOR HOLD STATUS Set transmission to operator hold status Reason is E record received or transmission is rejected by user exit DFUX001 f sid mn sid2 dsname TIME OUT The transmisson of the data set identified by dsname will be terminated because of missing responses from the remote station f sid mn NO BUFFER AVAILABLE TO SEND HEADER OR TRAILER rvsMVS Messages and Codes 5 rvs Messages DF9205E DF9206E DF9207I DF9208E DF9209E DF9210E DF9211E DF9225I DF9226P All line buffer are temporarily in use The transmission is cancelled The status of the send request is changed to the HOLD statu
212. he security framework Read the cryptlib error code for more information Couldn t initialize the security framework Read the cryptlib error code for more information Couldn t end the security framework Read the cryptlib error code for more information Couldn t initialize the security framework Read the cryptlib error code for more information Couldn t cleanup memory after execution Read the cryptlib error code for more information Couldn t cleanup memory after execution Read the cryptlib error code for more information Couldn t end the security framework Read the cryptlib error code for more information Internal error Couldn t obtain enough memory to create the P15 keystore Ensure that the whole address space and enough memory is available You may wait until another process has finished and freed its memory The required password for keystore access isn t set Please check your configuration and try again Couldn t obtain enough memory to create a password buffer Ensure that the whole address space and enough memory is available You may wait until another process has finished and freed its memory Couldn t open the P15 keystore Read the cryptlib error code for more information Internal error Couldn t close the P15 keystore Read the cryptlib error code for more information Internal error rvsMVS Messages and Codes 5 rvs Messages 4221009 4221010 4221011 4221012 4221013
213. hich does not include this function The data set queued to station sid cannot be transmitted the send request for this data set is placed in the hold state DF3610E S sid mn I O ERROR ON INPUT DATA SET NEW TRANSMISSION REQUIRED NO RESTART An error occurred during reading the indicated file A restart is not possible The file will be placed in hold status and must be created a second time DF3611E S sid mn I O ERROR DURING RESTART POSITIONING NEW TRANSMISSION REQUIRED NO RESTART An error occurred during restart positioning of the indicated file No further automatic restart takes place The file will be placed in hold status and must be created a second time UNCATLGD xx DF3613W S sid mn dsname NOT 1 b DELETED yy zz J The data set dsname has been completely sent to station sid After this the data set disposition is performed In this case execution of the data set disposition failed The data set could not be uncataloged or could not be deleted xx denotes the returncode register 15 in decimal of the CATALOG macro yy denotes the returncode register 15 in decimal of the SCRATCH macro ZZ denotes in decimal the scratch status code of the SCRATCH macro for a description of these return codes see for example the IBM manual OS VS2 SPL Data Management KEPT DF36141 S sid mn dsname TRANSMISSION COMPLETE DELETED luNCATLG The transmission of the data set is complete The rvs
214. his message occures always in conjunction with DF50071 N sid NO RESIDENT RECORDS FOUND NO END TO END RESPONSES FOUND One of the commands N sid RR name or N sid N name was entered and no resident receive entry or no end to end response for data sets with a dsname starting with name has been found N sid MORE THAN 100 ENTRIES FOUND DISPLAY IS INCOMPLETE This message appears as a reply to control data set queries n sid when more than 100 entries have been found In this case only the first 100 entries that are found in the control data set will be displayed INVALID REPLY Incorrect operator entry DATA SET NOT CATALOGED The DF command has been entered and the data set is not cataloged NO INFORMATION POSSIBLE The DF command has been entered but there is no information about the dataset spedified e g if the dataset is migrated INFO dsname volume RECS a BLOCKS b LRECL c BLKSI d RECFM e DSORG f This message occures if the command DF dsname volume has been entered number of records in the dataset number of blocks in the dataset logical record length blocksize of the dataset record format of the data set data set organization ODQA0 08 The listed values a and b are not in each case the exact values of the record and block number But they give an overview of the size of the data set DATASET NAME MISSING INVALID This message is issued if the dataset name is m
215. hortage X ORT ACME 12345678 Internal trace message of Send Dispatcher ID nn RC 00 REC key ORT sid dsn RD readydate RT readytime SD startdate ST starttime This message is generated if the access to the control data set ended with certain return codes The message may appear if errors occur during access the control data set FREE SPACE ON rvs LOG DATA SET This message is generated during start rvsMVS monitor ONLY FREE SPACE ON rvs LOG DATA SET This message occures if the rvs log data set contains less than 1596 of free space The message indicates that program DF072A00 saving of control data set and log data set has to be started within the next time SAVING OF KD AND rvs LOG DATA SET REQUIRED This message appears only in conjunction with message DF5402W F sid REQUEST FAILED BY USER EXIT message from exit length max 80 bytes Self explaining message passed by user exit RACF exit controlls the access to the control data set AUTOMATIC CLOSE FOR CONTROL DATA SET EXECUTED BECAUSE OF VSAM FEEDBACK CODE 14 HEX An update of the rvs control dataset could not be executed because of VSAM feedback code 14 The code means a control intervall which is connected to the update processing is in exclusive control by another task This error situation is automaticly cleaned by an CLOSE OPEN of the control data set rvs repeats the faulty update TIME USED FOR ENQ RESERVE nnn hh SE
216. hows the content of the registers 0 to 7 at the time of abend nn REGS 8 15 xxxxxxxx XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX This message is issued by the rvs XOT CTCP task when an abend occurs The message shows the content of the registers 8 to 15 at the time of abend nn SESSION REJECTED FOR STATION sid ISTATUS INACTIVE A request for establishing a session with station sid has been rejected because the stations entry is not released yet ISTATUS can be changed dynamically by the Operator see rvs Operations Manual if neccessary nn COMMAND REJECTED TERMINATION OF RVS X 25 CTCP IN PROGRESS This message is issued by the rvs XOT CTCP task when a command has been entered but termination of the rvs XOT CTCP task has been already started nn SPECIFIED PARTNER NUMBER INDEX mm NOT DEFINED This message is issued by the rvs XOT CTCP task if the operator command A SID Cnn Nmm was entered and the specified partner number index mm is not defined in station table entry nn SPECIFIED PARTNER NUMBER INDEX mm NOT DEFINED FOR SELECTED CTCP This message is issued by the rvs XOT CTCP task if the operator command A SID Cnn Nmm was entered In this case the specified partner number index is defined for the station but not for the specified CTCP rvsMVS Messages and Codes 5 rvs Messages DF9I52I nn A sid DIALING XOTNUM mm This message is issued when the rvs XOT CTCP task sends a
217. ich includes a specification of an X 25 CTCP TCP IP controltask has been entered e g A RVST C1 or P RVST C10 and the specified CTCP TCP IP controltask is e not active e not ready to process an operator command at this time e already active rvsMVS Messages and Codes 5 rvs Messages DF3063E rvsMVS LICENCE KEY IS EXPIRED License Key is expired DF30641 APF AUTHORIZATION YES NO This message shows if APF authorization is used or not DF3065E DELAY COMMAND FAILED WRONG TIME VALUE The DELAY command in startmember contains a wrong time value DF3066I MODULE STARTED VERSION This message shows the monitor license task version information DF3201P REFRESH OF STATION RECORDS STARTED LEVEL date time During start of the rvs monitor and during execution of the refresh for the stations table rvs command REFR STAT a refresh of the station records whithin the rvs control dataset is done The station records include station depentent information and are used for checks when send requests are created module DF080A00 LEVEL indicates the assembly date and time of the refresh module DF3202P REFRESH COMPLETE NEW nl DEL n2 UPD n3 TOTAL n4 Refresh of the of the station records whithin the rvs control dataset is complete The message displays the number of inserted deleted and modified records as well as the total number of station records DF3203P REFRESH OF STATION RECORDS ALREADY ACTIVE NOT EXECUTE
218. id command possibility to start transfer of this Dataset F5 rvsFTP Task generates this record during transmission send of Trailer dataset If this record is shown rvsFTP job has not finished itself NR control dataset has not generated still Must have examined if doesn t give problems executed this job e g JCL error s At necessity there is again by means of S sid command possibility to start transfer of this Dataset on the Client side SID station ID DSN FTP control dataset name name of internal rvsFTP control dataset real dataset name name of real dataset to be send CD Creation date of send request CT Creation time of send request SD Last start date of transfer of real dataset ST Last start time of transfer of real dataset f sid INVALID SUBPARAMETER The command F sid was wrong specified f sid VTAM SUBTASK NOT ACTIVE Modification of the incore session s table is possible only if the VTAM control task is active rvsMVS Messages and Codes 5 rvs Messages DF4403E DF4404E DF4405E DF4406E DF4407E DF4408E DF4409E DF4410E DF4411E DF4413E DF4414E DF4415E DF4416E DF4417E DF4800I f sid mn INVALID MODE NUMBER An undefined session mn has been specified f sid LINE IS STILL ACTIVE The command F sid pp is only valid when line control is terminated f sid VALID PP S ARE ppp ppp In case of a wrong program profile specification in
219. id WRITING OF EVENT event name TO yyyy WAS NOT SUCCESSFUL RC cc rvsMVS Messages and Codes 5 rvs Messages DF5808E DF58091I DF5810W DF5811P DF5817I DF5812E DF5813E DF5818E DF5819I After reception of a dataset from station sid an event event name was written to the job scheduling subsysten yyyy The action was successful or not successful according to the return code of the executed macro R sid JOB PREPARED FOR CANCEL BECAUSE OF FAILED RENAME JNM name number After reception of a dataset from station sid the dataset could not be renamed In case of GDG processing the jobstart is cancelled to avoid processing of the wrong GDG version R sid JOB SUBMISSION WRITING OF EVENT ALREADY DONE SUPPRESSED NOW After reception of a dataset rvs checks whether a jobstart writing of event has already been done for this file In this case a second job submit will be suppressed This message indicates an interal error it should normally never occur F sid WRITING OF EVENT SUPPRESSED BECAUSE OF FAILED RENAME After reception of a dataset from station sid the dataset could not be renamed In this case writing of event is suppressed to avoid processing of not existing file R ORT LOG ENTRY LG FOR text R ORT CONTINUE WITHOUT CHANGE OF JOB STATEMENT CARD DATASET OPEN ERROR Messages DF5811P until DF58171 are for possible error detection only They are not in effect for users purpose F sid F
220. id mn TIME hhmmssth event Display of internal trace data for session mn to station sid This message is displayed if the command U sid has been entered or if the session has terminated abnormaly event denotes the type of event which has occurred hhmmssth is the timestamp of the time when the event has occurred The following events are recorded in the internal trace VTAM REQUEST rpl based VTAM request Additional information type of request VTAM Macro returncode and feedback code of the request synchron or asynchron request complete or incomplete request definite response required or not STOP REQUEST stop request stop command has been detected CANC REQUEST cancelrequest cancel command has been detected SUBTASK ENDED normal end of the session subtask SUBTASK ABEND abnormal end of the session subtask LOSTTERM EXIT the lostterm exit has been scheduled for this session Additional the reason code is displayed SCIP EXIT the scip exit has been scheduled for this session Additional rvsMVS Messages and Codes 5 rvs Messages information DFC SC codes such as BIND REQUEST UNBIND REQUEST and others LOGON EXIT the logon exit has been scheduled NSEXIT the nsexit has been scheduled for this session Additional information NS RU CLEANUP NOTIFY or NSPE WAIT FOR REQ a VTAM request has been issued but the request has not completed within a certain time Additional information same as for VTAM REQUE
221. identification SID but with changed access method ACME DF22CAI NUMBER OF UPDATED ENTRIES nnnn Number of Station Table entries where changes have been made in one or more than one of the Station Table parameters DF22C5I SIZE OF APPC NODE TABLE ANT TO SMALL RE START rvsL More than 200 new LU6 2 Station Table entries have been added to the Station Table Re start the LU6 2 component of rvs to make the new entries active DF22C6I ONLINE STATION REFRESH ALREADY ACTIVE The Station Table Online Refresh is already active Wait for termination of the previous command REFRESH STATIONS DF22C9I ONLINE STATION REFRESH ENDED The Station Table Online Refresh has terminated successfully DF2301E A sid SESSION PROFILE sss NOT FOUND ON SESSION TABLE rvsMVS Messages and Codes 5 rvs Messages DF2302E DF2303I DF2304I DF23051I DF2401E DF2402E DF2403E DF2404E DF2405E DF2406E DF2407E DF2500E In the stations table station sid is defined with a sessions profile sss This profile could not be found in the sessions table See rvsMVS Installation Manual Generating the STATIONS SESSIONS table INVALID MODE x FOUND IN SESSION PROFILE sss The sessions profile sss contains an invalid sessions type X SESSION TABLE ESTABLISHED After start of the rvs Monitor the session table has been created incore As a model for this table member SESSIONS of the rvs Tables Data set is used in con
222. iler or response record During receiving of an rvs protocol data record D record the length field contains a data length which exceeds the line buffer size or a data record has been received and a length field contains an invalid or inconsistent value see the error message of the monitor which describes the error in detail During expanding data a record length was found which exceeds the blocksize of the received data set A field in rvs protocol header record H record has an invalid format Error during data compression Only in case of PDS transfer a PDS is to be sent but the remote station does not support PDS transfer or a PDS is to be received and loading of the PDS failed A file is to be received and cataloged after transmission but a file with the same name already exists or is currently in transmission Receiving of this file will be rejected The transmission of a file is rejected by exit DFUX001 This mostly means that the user is not allowed to send or receive the data set access denied by security system The REPLACE option has been specified but the necessary space could not be obtained in the receiving station rvsMVS Messages and Codes 2 rvs User Codes 116 117 118 120 124 128 132 136 140 144 148 152 160 164 168 074 075 076 078 07C 080 084 088 08C 090 094 098 0A0 0A4 0A8 A data set is to be received in a
223. ion TPEND RRO0000 00 VTAM reason code for TPEND exit LOSTERM RR0000 00 VTAM reason code for LOSTERM exit RELREQ not available SCIP RPLCNTDF DC SC UNB TYPE from read only RPL DFASY RPLCNTDF DC SC from exit read only RPL NS NSPE RRSSSS US RR VTAM reason code SSSS c sense US user sense byte 2 NS NOTFY RRSSSS US same as NSPE NS CLEAN RR0000 00 same as NSPE ACT recommended action 01 ignore processing is done in the exit 02 inhibit further sessions 03 close ACB PLU 2 222272722 RSN xxxxxx xx ACT LU CID rvsMVS Messages and Codes 5 rvs Messages DF9724P DF9725P DF9726P DF9727W DF9728W DF97291I DF9730I DF97311I This message is issued by the rvs APPC task manager routine The message is the same as the previous except for the exit reason being edited into character format in case of SCIP and DFASY exit types CNOS REQ FROM MODE LIMITS This message is issued by the rvs APPC task manager routine A CNOS request was received from the indicated partner LU In the message is shown the corresponding mode name and the session limits negotiated Also shown is whether the request was accepted or rejected A request is rejected if no station could be found for the parter mode combination This message is issued by the rvs APPC task manager routine A LOSS request was received from the indicated partner LU The LOSS request is received
224. ion or after receiving the data set dsname on volume volume a copy job job had been started This job is not yet complete DF4202I NO INCOMPLETE JOBS FOUND This message occures if the command DJ has been entered and there was no oncomplete copy job rvsMVS Messages and Codes 5 rvs Messages DF42F2I DF42F5P DF42F61 DF42F7P DF42F8P DF42FBP DF4401E DF4402E NO INCOMPLETE JOBS FOUND This message occurred if the command DP has been entered and there was no incomplete rvsFTP job xx SID sid DSN FTP control dataset name xx SID sid DSN real dataset name xx SID sid CD dd mm yy CT hh mm ss xx SID sid SD dd mm yy ST hh mm ss These messages occurre if the command DP has been entered and there were incomplete rvsFTP jobs found The meaning of the parameters is XX FTP internal records type F2 rvsFTP Task generates this record before submitting the rvsFTP job send direction If this record is shown the rvsFTP job has not yet finished itself Must have examined if doesn t give problems executed this job e g JCL error s At necessity there is again by means of S sid command possibility to start transfer of this Dataset F3 rvsFTP Task generates this record during transmission send direction If this record is shown rvs waits on the Reply Dataset TD control Dataset Must have examined if doesn t give problems at transfer on the server side At necessity there is again by means of S s
225. ion related line of the lines which are specified in the STATIONS member of the rvs TABLES data set is available A sid nnn REQUESTED LINE NOT ASSOCIATED The command A sid nnn has been utilized for activation The line nnn which is specified in the activate command is not available and could not be associated A sid LINE nnn ASSOCIATED During activation of the station sid this station was associated with line nnn T sid nnn TRACE STARTED After entry of the command T sid this message appears and signifies that a trace has been started for line nnn and station sid A sid nnn TRACE ALREADY ACTIVATED The command T sid has been entered although a trace is already running for sid and the line nnn O sid nnn TRACE NOT ACTIVE The command O sid has been entered although no trace is still active on line nnn for sid O sid nnn TRACE STOPPED The trace for sid on line nnn was stopped by the command O sid rvs OC A sid nnn IS PENDING The message is the same like DF3001A but the process of activating the line control task for sid nnn is not yet complete rvsMVS Messages and Codes 5 rvs Messages Reason The line control module cannot be loaded from the rvs load library the line control module is the first program of the used program profile may be listed via X sid P The disk volume on which the rvs load library resides cannot be accessed may be the disk volume
226. is possible don t specify a volume in the resident receive entry DF3518W R sid LOCATE MACRO FAILED FOR dsn DF3518W R sid LOCATE FAILED RC xx yy DSN dsn A data set is to be received from station sid this data set is to be cataloged at the end of the transmission The received data set is treated as a GDG data set Therefore the current generation must be determined But this is not possible because the LOCATE macro failed xx and yy denote the returncodes content of reg 15 and reg 0 of the LOCATE macro dsn denotes the data set name as used for the LOCATE macro One reason may be that no GDG base has been defined for this data set After this rvs tries to catalog the received data set with the original name received from the remote station For a description of GDG processing see rvsMVS User s Manual Benutzerhandbuch DF3519W f sid DATA SET NOT CATALOGED reason The data set dsn has been received from station sid At end of transmission this data set is to be cataloged but this could not be done because of one of the following reasons DEVICE CODE NOT FOUND the device code of the receive volume could not be determined program internal error RENAME FAILED may happen in conjunction with GDG processing RC xx the CATALOG macro failed xx denotes the returncode register 15 in hexadecimal of the CATALOG macro For this returncode see for example the IBM manual OS VS2 SPL Data Management DF3519P R sid
227. is reserved by another job Action Wait until this disk volume can be accessed or 1 Stop the line control P sid nnn 2 Make sure that the rvs load library may be accessed 3 Activate the line control A sid nnn DF3037I A sid nnn REJECTED TRY LATER Activating of line control for sid or sid nnn has been rejected because a previous activating for this station or line is not yet complete Message DF3036l indicates the previous activating DF3038I x ALL y COMPLETE The activation respectively deactivation of all accordingly signed lines respectively sessions has been performed without error The values of x y may be x A activate P stop y BTAM VTAM or DF30381I x ALL y ERROR DETECTED It was not possible to activate all signed lines without failure Reason An error occurred during line allocation or after message DF3036A the command P sid nnn has been entered to stop activation DF3039I COMMAND FROM START MEMBER command Display of commands which are executed automatically after start of the rvs monitor These commands may be specified within member START of the rvs tables data set which is allocated with DD name START to the rvs monitor DF30401I parameter value Message to display a parameter value if one of the following commands has been entered DSPTI DUMP HOLD PMSG ROUT SDELAY STORAC TIME and VOLUME For a description of these commands see Operations Manual
228. isk volume is not mounted The try to restart the transmission will be cancelled and the restart count is set to zero This causes that the next transmission request is not a restart DF3735W R sid mn NONZERO RETURN CODE OF INSTALLATION EXIT DFUX001 Execution of the installation exit DFUX001 ended with a nonzero returncode One of the following two messages with more information is also displayed in conjunction with this message DF3735W R sid mn ONLY INSTALLATION STANDARDS WILL BE USED TO RECEIVE dsname The data set dsname has to be received by station sid The installed user exit DFUX001 supplies a nonzero return code The receiving of the data set is to be continued but every specification how to control or how to process the data set after receiving is to be suppressed Especially after receiving no user job is to be started by rvs DF3735E R sid mn RECEIVING OF dsname REJECTED BY DFUXOO1 A data set with name dsname shall be received from station sid but the installation exit DFUX001 which is executed during start of transmission ended with returncode 12 This means reception of the file is to be rejected by rvs The reason for this must be detected by rvsMVS Messages and Codes 5 rvs Messages DF3736E DF3738E DF3739E DF3742E DF3743P DF37441I DF3745P DF4101I the people who are responsible for the local rvs installation The file cannot be received until the exit DFUX001 has been changed R
229. issing or if an invalid dataset name e g more than 44 characters in total has been entered rvsMVS Messages and Codes 5 rvs Messages Messages of the Dispatcher Task STARTED DF52011 DISPATCHER SUBTASK I VERSION vvv dd mm yy tt mm aa bb cc leNDED J Start or end message of dispatcher routine This program is started just after start of the rvs monitor For a description of the functions performed by this task see Installations Manual chapter 5 rvs Start parameter DSPTI and DSPTIW vvv version of Dispatcher dd mm yy tt mm time of assembly aa bb cc time of last changes in the Dispatcher DF5202I AUTOMATIC DIAL FOR STATION sid INITIATED ON LINE 111 The BSC line Ill is defined as an autodial device This message is issued when autodial to station sid has started on line III DF52031 AUTODIAL FOR STATION sid INITIATED acme The message indicates that autodial for station sid and acme has started As a result of autodial for one session to station sid will be activated automatically by rvs DF52041 AUTOACT FOR STATION sid INITIATED LUO The message indicates that autoact for station sid has started Parameter AUTOACT YES is specified for station sid rvs has detected that at least one session to station sid is not active and now tries to activate this session DF5205E S sid acme nm TRANSMISSION OF dsn REJECTED BECAUSE OF EXIT DFUX001 For send session nm to station sid and access m
230. itiating the demigration processing the transmission will be cancelled A send request is set into a temporary HOLD status This message is followed by messages DF10311I and DF1032P DF1031I f sid RECALL COMMAND SENT TO HSM FOR dsname RC X rc A recall command has been sent to HSM to demigrate a file to be allocated rc denotes the returncode of the ARCHRCAL macro in hexadecimal dsname denotes the virtual filename of the transmission This message is followed by message DF1032P rvsMVS Messages and Codes 5 rvs Messages DF1032P f sid PHYSICAL DATASET NAME dsname This message displays the physical data set name when a file is to be demigrated by HSM DF1041I This message will be displayed after the service program IDCAMS was called by rvs The message s contains the SYSPRINT output of IDCAMS DF1091I PROCESSING OF CODE TRANSLATION TABLES STARTED Reading of the internal and external code translation tables has been started See also DD statement TRNTABLES in rvs start job DF1098I PROCESSING OF CODE TRANSLATION TABLES COMPLETE Reading of the internal and external code translation tables has been finished See also DD statement TRNTABLES in rvs start job DF1099P AVAILABLE CODE TRANSLATION TABLES ARE DF1099P SSTDA2E STANDARD TABLE ASCII gt EBCDIC DF1099P SSTDE2A STANDARD TABLE EBCDIC gt ASCII DF1099P SODTA2E ODETTE TABLE ASCII gt EBCDIC DF1099P SODTE2A ODETTE TABLE EBCDIC gt ASCII DF1
231. itted are not JES3 comment cards starting with and not a valid job card starting with name JOB where name is any valid jobname 0x18 Creation of ACB RPL failed 0x1C Job member exists but is empty 0x20 open job data set failed 0x24 FIND macro wrong 0x28 invalid DCB attribute of job 0x2C SYSOUT not allowed in job dataset ABEND 580 RJE can t create KD entry output can t sent back R sid text text is a message of the user exit DFUX0003 R sid ALLOCATION OF JOB DATA SET FAILED ERROR xxxx yyyy After reception of a data set from station sid an automatic job start should have been executed The allocation of the job data set containing the JOB member failed dynamic allocation error xxxx info code yyyy see SPL Job Management This message will be followed by DF5802l R sid MEMBER member NOT FOUND IN DATA SET dsname After reception of a data set from station sid an automatic job start should have been executed but the member containing the JCL could not be found This message will be followed by DF5802l R sid JOB PROTOCOL SUBMITTED BECAUSE OF FAILING JOBSTART After reception of a data set from station sid an automatic job start should have been executed but this jobstart failed As a result of this and specification of rvs start parameter JFPZYES another job member JFPJCL of the rvs tables dataset has been submitted in order to notify somebody about the failing automatic jobstart R s
232. ived from station sid The received dataset is an unloaded PDS which must be loaded again rvs cannot load the received PDS Additional error information is available in the rvs printout see message DF6109P The transmission will be terminated abnormally See rvsMVS Installations Manual Appendix for a description of PDS transfer mn denotes the session SNA or the line address BSC which was used for receiption of this file R sid mn LOAD OF RECEIVED PDS FAILED Display of this message is always preceeded by one of the messages DF6102E up to DF6107E it is a general error message if load of a PDS failed For more error information see the preceeding message s text This message is only printed on the printout SYSWTO file of the rvs monitor not on console It is always preceeded by display of message DF6107E and contains more error information why load of the received PDS was not possible In general several of these messages with different self explaining text will be printed immediately one behind the other complete sysprint protocol of the load utility R sid mn ALLOCATION ERROR XXXX YYYY dataset A dataset has been received from station sid The received dataset is an unloaded PDS which has been loaded successfully An unallocation error has occurred for dataset which rvsMVS Messages and Codes 5 rvs Messages DF6111E DF6112E DF6115P DF6201I DF6202I DF6203I DF6204I DF62051I
233. jobid see message DF90811 the data set has been deleted DF9101M M sid mn text The message text has been received from the remote station This may be a reply to the command Q sid or the operator of the remote station has sent this message DF9103P f sid mn sid2 dsname time HL RESPONSE IGNORED RECORD NOT FOUND rvsMVS Messages and Codes 5 rvs Messages DF9105E DF9106E DF9107I DF9108P DF9135P DF9136P DF91400 DF9201E DF9203P DF9204E The receipt of a high level response record from the final station sid2 after reception of the data set dsname could not be written to the control data set because there was no related AS type control record which could have been updated The high level response record is a end to end response message using the function transmission of data sets via relais station s f sid mn SEND r RECORD FAILED SENSE ssss uuuu The transmission of a rvs record type r terminates with a failure SSSS VTAM system sense code uuuu user sense code see chapter 4 within this manual for an explanation of the different user sense codes f sid mn text Extention to message DF9105E If a user sense code is specified a short text is given as explanation text is a short description of the user sense code which has been detected See chapter 4 within this manual for a list of possible user sense codes f sid mn text The error message text has been received from t
234. junction with the rvs Stations Table ERROR SPROF NOT FOUND gt ENTRY FOR SID IGNORED The mentioned Station Entry has been ignored because incorrect session profile parameter has been specified TOTAL NUMBER OF INTERNAL STATION TABLE ENTRIES The number of internal station entries has been decreased INVALID PARM VALUE Error in the parm entry of the program DF024A00 This program copies a received data set to a tape or into a SYSOUT CLASS or a data set which is to be transmitted to disk The entry in the member RTAPEJC SYSOUTJC or STAPEJC of rvs TABLES may not be in the right column position of the line INVALID INPUT DATA SET NAME The name of the input file of the program DF024A00 is invalid See also message DF2401E INVALID OUTPUT DATA SET NAME The name of the output file of the program DF024A00 is invalid See also message DF2401E INVALID INPUT VOLUME SERIAL NUMBER The volume number of the input file of the program DF024A00 is invalid See also message DF2401E RE READ OF THE KD RECORD FAILED UPDATE OF THE KD RECORD FAILED INITIAL READ OF THE KD RECORD FAILED Error of the control data set RVS KD in the program DF024A00 See also message DF2401E D sid INVALID REPLY REENTER COMMAND rvsMVS Messages and Codes 5 rvs Messages An invalid reply has been entered enter correct reply according to the displayed message DF2510A D sid dsname VOL volume ENTER DEL OR NO OR END DF2
235. k communication LV states the last modification date of program DFO95A nn VCBiHHE LU SID This message is issued by the rvs X 25 CTCP task in response to a Display DS command The message displays information for a Virtual Circuit Block VCB and shows the VCB number the current VCB state the virtual circuit Logical Unit associated with the VCB if an X 25 connection exits and the station identification rvs station code and Odette station code if a station is connected nn BUFSIZE CREDIT COMPRESS RESTART SPECIAL LOGIC This message is issued by the rvs X 25 CTCP task in response to a Display DS command The message shows the exchange buffer size used for the connection the established credit value and whether the compress restart and special logic options are used or not This message is issued by the rvs X 25 CTCP task in response to a Display DS command The message shows information about a file transfer if the file is Sent or Received the number of records or 1K blocks transmitted so far and the file name nn REGS 0 7 xxxxxxxx XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX This message is issued by the rvs X 25 CTCP task when an abend occurs The message shows the content of the registers 0 to 7 at the time of abend rvsMVS Messages and Codes 5 rvs Messages DF9535I DF9536W DF9537W DF9538P DF9539P DF9540P DF9541P DF9542W nn REGS 8 15 xxxxxxxx XXXXXXXX
236. le R sid mn REMOTE JOB dsname NOT AUTHORIZED PROCESSING NOT STARTED The data set dsname has been received from the remote station sid These data set should be submitted as a job but for the station sid there is no authorization to do this R sid mn This message is issued by the SNA LU 0 Protocol task when a data set has been received One of the following actions and or errors have occurred after receiving DATASET RENAMED dsname With DFSMS the data set is received under a temporary data set name with timestamp After complete reception the data set has been renamed to its final name dsname DATASET NOT CATALOGED xx The data set could not be cataloged after receiving For the information reason code xx see MVS ESA Authorized Assembler Programming Guide DATASET NOT SCRATCHED RC xxxx xxxxxxxx dsname The temporary data set could not be cataloged after start of reception For this reason the already allocated data set is to be scratched which did not end successfully For return and diagnosis codes xxxx xxxxxxxx see DFSMS MVS Diagnosis Reference DATASET NOT RENAMED RC xxxx xxxxxxxx dsname The temporary data set could not be renamed after reception For return and diagnosis codes xxxx xxxxxxxx see DFSMS MVS Diagnosis Reference dsname denotes the old data set name timestamp This message is followed by DATASET TARGET NAME dsname The message displays the new data set
237. llocation gggg dynamic allocation error reason code new file allocation hhhh dynamic allocation error info code new file allocation ii returncode reg 15 of scratch macro old file ji scratch status code old file kk returncode reg 15 of rename macro II rename status code mm returncode reg 15 of scratch macro new file rvsMVS Messages and Codes 5 rvs Messages DF2702P DF28001I DF2801I DF3000I DF3001A DF3002E DF3004I nn scratch status code new file R sid REPLACE FUNCTION ALLOCATED SPACE n REQ SPACE m BLOCKS During reception of a file an already existing data set with the same name is to be replaced replace function During start of reception rvs checks whether the already existing file has sufficient space to store the file to be received This message displays the space allocated to the existing file n and the space required for the file to be received m in units of data set blocks JOB jobname STARTED TO PROCESS dsname The data set dsname is processed from the job jobname e Tapes to be transmitted are to be converted to disk Received disk data sets are converted to tape if output is to be placed on tape Received lists are to be written to SYSOUT Received jobs have been started directly User jobs are started for processing of the data if indicated in the resident receive record in the control data set JOB jobname NOT STARTED TO PROCESS dsname RC ZZ The d
238. location to stations sid are indicated f sid NO LINE ACTIVE Response to the commands DS and DV in case of no active line or session has been found STILL f sid LINE 111 IS b ACTIVE lnor J This message appears after the entry of activation or stop command for a BSC line or for a station which uses a BSC line for transmission This message is issued for example if the command A Ill has been entered but line Ill is already active or if the command P Ill has been entered but line Ill is not active f sid mn text Status report of a VTAM session This message is a response to the commands DS or sid text can be substituted by NO ACTIVE SESSION the subtask is started but there is no VTAM session established SESSION BEING ESTABLISHED The subtask just tries to establish a session SESSION ACTIVE This is an active session on which no data sets are transmitted operator communication session rvsMVS Messages and Codes 5 rvs Messages WAITING FOR WORK The session is established but at this time there is no data transfer dsname nnn RE VOL volume status For a running transmission the following is listed dsname data set name nnn number of transmitted records volume volume number status status of this transmission DF3016A NO SPACE IN LOG DATA SET SAVING OF KD AND LOG REQUIRED The LOG data set is completely filled There will be done no more updates of the control data
239. maximum limit of 66 Check the number of VIA and BACKUP stations specified in the stations table This ABEND is coded in the program DF078Cxx Code 1010 This ABEND is coded in the program DF078Cxx Code 1011 This ABEND is coded in the program DF078Cxx Code 1012 This ABEND is coded in the program DF078Cxx Code 1013 This ABEND is coded in the program DF078Cxx Code 1014 This ABEND is coded in the program DF078Cxx Code 1015 This ABEND is coded in the program DF078Cxx Code 1016 This ABEND is coded in the program DF078Cxx Code 1017 This ABEND is coded in the program DF078Cxx Code 1018 See rvs User See rvs User See rvs User See rvs User See rvs User See rvs User See rvs User See rvs User See rvs User rvsMVS Messages and Codes 3 rvs Abend Codes 1059 423 This ABEND is coded in the program DF078Cxx See rvs User Code 1019 1060 424 This ABEND is coded in the program DF106Cxx Error during decompressing received data records 1200 460 This ABEND is coded in the program DF112Bxx During expanding compressed data the output buffer size has been exceeded 1201 461 his ABEND is coded in the program DF121Axx The number of the storage information areas or the number of the CSA subpool descriptors exceeds the boundary Should not occur error 1510 5E6 This ABEND is coded in the program DF151Axx Invalid specification of PARM entry 1511 5E7 This ABEND i
240. may be either UNLOADED PDS or PDS for the error code xxxx and the info code yyyy see for example the IBM manual OS VS2 SPL Job Management The transmission will be completed normally mn denotes the session SNA or the line address BSC which was used for receiption of this file R sid mn UNLOADED PDS NOT SCRATCHED RC xx SC yy A dataset has been received from station sid The received dataset is an unloaded PDS which has been loaded successfully After this the unloaded PDS used as a work dataset is no longer needed and should be scratched but scratch of this dataset failed xx denotes the returncode yy denotes the scratch code of the scratch macro see for example the IBM manual OS VS2 SPL Data Management The transmission will be completed normally mn denotes the session SNA or the line address BSC which was used for receiption of this file R sid mn DATASET COULD NOT BE CATALOGED RC xx A dataset has been received from station sid The received dataset is an unloaded PDS which has been loaded successfully After this this PDS shall be cataloged but the catalog macro failed with returncode xx see for example the IBM manual OS VS2 SPL Data Management The transmission will be completed normally mn denotes the session SNA or the line address BSC which was used for receiption of this file R sid mn DATASET TO BE SCRATCHED IS NOT CATALOGED A PDS file has been received After receiving of the unlo
241. me into the certificate or certificate request Read cryptlib error code for more information Couldn t set the state or province name into the certificate or certificate request Read cryptlib error code for more information Couldn t set the locality name into the certificate or certificate request Read cryptlib error code for more information Couldn t set the common name into the certificate or certificate request Read cryptlib error code for more information Couldn t set the key usage into the certificate or certificate request Read cryptlib error code for more information Couldn t set extended key usage server authentication into the certificate or certificate request Read cryptlib error code for more information Couldn t set extended key usage client authentication into the certificate or certificate request Read cryptlib error code for more information Couldn t set flag is not a CA into the certificate or certificate request Read cryptlib error code for more information Couldn t create a self signed certificate Read cryptlib error code for more information Couldn t obtain the current system time Couldn t set validity into the certificate Read cryptlib error code for more information Couldn t set flag is self signed into the certificate Read cryptlib error code for more information Couldn t sign the certificate by the own private key Read cryptlib error code for more information Couldn t create a
242. message is issued by the Odette File Transfer Protocol task when an unexpected protocol unit is received ie in the current state of the protocol a certain protocol unit is expected but instead another protocol unit is received The state and information code values indicate in which situation the error occurred State and info code values are described in message DF94031 DF9411E S ORT ACCM SESSID SFNA text This message is issued by the Odette File Transfer Protocol task when a Start File Negative Answer SFNA protocol unit is sent received In the message is shown the code used in the SFNA protocol unit Value 01 Invalid filename 02 Invalid destination 03 Invalid origin 04 Storage record format not supported 05 Maximum record length not supported 06 File size is too big 10 Invalid record count 11 Invalid byte count 12 Access method failure 13 Duplicate file 14 File direction refused 15 Cipher suite not supported 16 Encrypted file not allowed 17 Unencrypted file not allowed 18 Compression not allowed 19 Signed file not allowed 20 Unsigned file not allowed 99 Unspecified reason rvsMVS Messages and Codes 5 rvs Messages DF9412P DF9413E DF9414I DF9415I DF9416W DF9417P DF9418E Z ORT ACCM SESSID ERP NOT SENT BECAUSE OF LOW OFTP PROTOCOL VERSION This message is issued by the Odette File Transfer Protocol task when an EERP NERP
243. mn ESTAE RECOVERY FOR ABEND code DSN dsname A file with the name dsname is to be sent to station sid An abend code has occurred e g system abend S001 or S013 This abend will be recovered by normal termination of the transmission A dump will not be written for the abend The send request is deleted in case of this error it is assigned with the status of an abended transmission S ORT MO KDUPDAT RC XXX R ORT MO 00010203 04050607 08090A0B OCODOEOF 0123456789ABCDEF Messages DF3634E until DF3635P are for error detection only They are not in effect for users purpose R sid mn DSN dsname STARTED A rvs header record has been received with the indication to receive the data set dsname R sid mn DYNAMIC ALLOCATION ERROR xxxx yyyy The allocation of the output data set failed For a description of the error reason code xxxx and the info reason code yyyy see OS VS2 MVS SPL Job Management R sid mn OUTPUT DATASET ALREADY IN USE A data set is to be received but the output data set is just used by another task within the rvs monitor This situation should normally not occur One reason for this might be that files from different remote stations shall be stored in the same output file as specified in resident receive entries and the replace function is also used If this situation is detected the transmission will be cancelled and dynamic allocation error 0210 99 is used as error indication R ORT MO ENQ I
244. mplete reception the dataset has been renamed to its final name dsname DATASET NOT CATALOGED xx The dataset could not be catalogued after receiving For the information reason code xx see MVS ESA Authorised Assembler Programming Guide DATASET NOT SCRATCHED RC xxxx xxxxxxxx dsname The temporary dataset could not be catalogued after start of reception For this reason the already allocated dataset is to be scratched which did not end successfully For return and diagnosis codes xxxx xxxxxxxx see DFSMS MVS Diagnosis Reference DATASET NOT RENAMED RC xxxx xxxxxxxx dsname The temporary dataset could not be renamed after reception For return and diagnosis codes xxxx xxxxxxxx see DFSMS MVS Diagnosis Reference DATASET ALREADY CATALOGED dsname The received dataset could not be catalogued after reception because a dataset with identical name dsname already exists The dataset will reside on disk under a temporary name with timestamp DATASET ALREADY CATALOGED AND NOT RE RENAMED RC DATASET NOT CATALOGED AND NOT RE RENAMED RC The received dataset could not be catalogued after reception but has already been renamed to its final name While renaming it back to its temporary name an error occurred For return and diagnosis codes xxxx xxxxxxxx see DFSMS MVS Diagnosis Reference The dataset will reside uncataloged under its final name on disk DATASET NOT UNCATALOGED dsname rvsMVS Message
245. n code The rvs APPC task will terminate if SETLOGON START is not successful rvsMVS Messages and Codes 5 rvs Messages DF9711E DF9712I DF9713E DF97141I DF9715E DF97161 DF9717W DF9718E RC RCPRI SEC xxxx xxxx xxxx This message is issued by the rvs APPC task when open of the ACB has completed and the ACB is checked for supported VTAM options The ACB check routine found that the VTAM APPC support could not be used In this message the VTAM return code and the primary and secondary return codes from an APPC verb are shown Update the corresponding APPL statement in VTAM and include the keyword APPC YES before activating the rvs APPC task again LOGON REJECT FOR LU REASON This message is issued by the rvs APPC task logon exit routine A logon request was received but the request was rejected The reject reason is shown in the message Also indicated is the name of the Logical Unit LU that was rejected F sid ACTSESS FAILED FOR RC xxxx SENSE xxxx This message is issued by the rvs APPC task manager routine A VTAM APPCCMD ACTSESS was issued to accept a new session with the partner sid indicated in the message but the request failed In the message the VTAM return code and sense codes for the failing request are shown Refer to VTAM programming manual for further information F sid SESSION ACCEPT FOR LU MODE This message is issued by the rvs APPC task manager rou
246. n outgoing call packet to a partner station with the specified X 25 number DF9I59E nn XOT TASK ABEND SID DSN 2 2 This message is issued by the rvs XOT CTCP task when a XOT task ABEND occurs DF9I61I XX X 79 9k 707 7 7 27 07 7 2 2 2 7 2 7 2 72 7 2 2 2 2 7 2 2 2 0 7 7 7 7 2 This is a universal message and is issued by CTCP to inform about Wrong Parameters Problem during TCP IP name resolution DF9I62I nn IP ADDRESS PORT This message is issued by the rvs KOT CTCP task in response to a Display DS command The message shows the statu the IP addr and port see DF9I311 too DF9I641I nn IP GETHOSTBYNAME ERROR This message is issued by the rvs XOT CTCP task in if a TCP IP name resolution error occurs DF9I90P XX XOT SUBTASK COULD NOT BE STARTED NOT ENOUGH MEMORY This message is issued by the rvs XOT CTCP task when start of an XOT subtask failed DF9I96I nn 2 XOT LISTENER IS RUNNING 2 This message is issued by the rvs XOT CTCP task in response to a Display DS command The message shows the status of XOT listener SID Sequencenumber x25 Address DF9197P nn VCBz CONIDz SESSION SID The XOT Task issues this message This message is issued if internal trace modul is used see command T RVSX This message is for internal use only DF9I98I nn CTCP R
247. n task in response to an DS command DF8907P sid TRACE FLAG IS ON OFF This message is issued by the FTP Main task in response to a T sid or O sid command DF8928P SPECIFIED STATION sid BUSY This message is issued by the FTP Main task when a command refering to a station is used The command cannot be honoured as all sessions for this station are active If this message often occurs increase the number of session value FTPSESS parameter DF8931P sid NOT USED COMMANDS WITH ALL PARAMETER rvsMVS Messages and Codes 5 rvs Messages DF8932I DF8939I DF8940I DF8942E DF8970P DF8974P DF8977P DF8994P DF8995P DF8996P DF8999P This message is issued by the FTP Main task in response to an activate station command ACTIVATION REJECTED FTPMAX EXCEEDED This message is issued by the FTP Main task in response to an activate station command FTP ACTIVE NO ACTIVE SESSION FOR STATION FOUND This message is issued by the FTP Main task in response to a CANCEL C or STOP P FTP command FTP ACTIVE ACTIVE SESSION FOUND This message is issued by the FTP Main task in response to a CANCEL C or STOP P FTP command INVALID COMMAND PARAMETER This message is issued by the FTP Main task when an invalid parameter to a used command is detected command This message is issued by the FTP Main task when decode of command parameter s fails xkkkKKKKX UNEXPECTED END OF TASK This message is i
248. n this volume The transmission will be terminated abnormally This error should normally not occur because rvs tries loading of the PDS a second time with modified dsname before this message is issued See rvsMVS User s Manual Appendix for a description of PDS transfer mn denotes the session SNA or the line address BSC which was used for receiption of this file R sid mn VOLUME volume NOT MOUNTED A dataset has been received from station sid The received dataset is an unloaded PDS which must be loaded again rvs cannot load the received PDS onto the specified disk volume volume because this volume is not mounted or an incorrect volume number has been specified for example within a resident receive entry The transmission will be terminated abnormally See rvsMVS Installations Manual Appendix for a description of PDS transfer mn denotes the session SNA or the line address BSC which was used for receiption of this file R sid mn UNIT NAME OF VOLUME volume NOT FOUND rvsMVS Messages and Codes 5 rvs Messages DF6105E DF6106E DF6107E DF6108E DF6109P DF6110E A dataset has been received from station sid The received dataset is an unloaded PDS which must be loaded again rvs cannot load the received PDS onto the specified disk volume volume because rvs cannot find the unit name UCB of this volume Probably rvs internal error The transmission will be terminated abnormally See rvsMVS Installati
249. n wants to stop the session 010 00A Error during reading or writing data error in remote disk Input Output routine 011 00B Password not accepted by remote station 012 00C Password not accepted no exchange defined 013 00D Password is missing 014 00E Remote station does not support PDS transfer or load of a PDS failed in the receiving station 015 OOF File with identical name is already existing cataloged Receiving of this file is rejected 016 010 Transmission is rejected by exit Usually this exit checks whether an user is allowed to send or receive a data set access authorization 017 011 A wrong record count in header has been received rvsMVS Messages and Codes 4 rvs Sense Codes 018 019 020 021 022 023 012 013 014 015 016 017 Lineblock is out of sequence Blocksize in header exceeds track capacity A wrong record count in trailer has been received Length of data exceeds line buffer Error during data de compression Replace function A data set has been received for which the space has to be enlarged This request could not be satisfied 4 1 Dynamic allocation errors Code Code decimal hexadecimal Meaning 040 028 Data set is allocated to another job or user 041 029 Unit or internal reader not available 042 02A Requested volume is not mounted 043 02B Unit name is not defined 044 02C Volume is not available 045 02D Device type does not have
250. nd the the name of the file server program Also shown is whether trace is active A or not I INVALID COMMAND PARAMETER This message is issued by the rvs APPC task when an invalid parameter to a used command is detected This message is issued by the rvs APPC task manager routine when a session start request has been received The request to start a session is accepted The message also shows the qualified network name of the partner sid and the mode name to use This message is issued by the rvs APPC task in response to an Activate station command The command cannot be honored as session negotiation is being done for the station DEFINED RESET TO LOW This message is issued by the rvs APPC task in response to a command A sid PRIO xxxxxx but this prio isn t defined in the logmode table Prio will be reduced to PRIO LOW rvsMVS Messages and Codes 5 rvs Messages Messages DF9780P until DF9791P are for error detection only They are not in effect for users purpose DF9799P This message is issued by the rvs APPC control task trace routine Shown is the name of control task subroutine which gets control For internal use only rvsMVS Messages and Codes 5 rvs Messages This page will be intentionally empty rvsMVS Messages and Codes 5 rvs Messages Messages of the SNA LU 6 0 Session Handler task DF9900I R sid mn SUBTASK STARTED FOR LU lu INIT xx The receive module has been started to
251. nfirmed 5 2 X 25 Diagnostic Codes 5 2 1 Diagnostic Codes from the DCE 00 No additional information Invalid P S Invalid P R Packet type invalid general For state Packet not allowed general Unidentifiable Call on one way logical channel Invalid packet type on PVC rvsMVS Messages and Codes 5 rvs Messages Packet on unassigned logical channel Reject not subscribed to Packet too short Packet too long Invalid GFI Restart with non zero GFI Packet type incompatible with facility Unauthorized interrupt confirmation Unauthorized interrupt Unauthorized reject Timer expired general Incoming call Clear indication Reset indication Restart indication Timer expired for call deflection Call setup problem general Facility code not allowed Facility parameter not allowed Invalid called address Invalid calling address Invalid facility length Incoming call barred No logical channel available Call collision Nonzero address length Nonzero facility length Facility not provided when expected Invalid ITU T specified DTE facility Maximum number of call redirections or deflections Exceeded Miscellaneous general Improper cause code for DTE Octet not aligned Inconsistent Q bit setting NUI Network User Identification problem International Problem general Remote network problem International protocol problem International link out of order
252. ngsanforderung PVC Servicedaten fehlerhaftt Ausl sung durch Operator Paket gt Annahme des Anrufs zu lang Verbindungsanforderung auf ankommend gerichtetem Kanal Verbindungsanforderung auf f r FVV reserviertem Kanal rvsMVS Messages and Codes 5 rvs Messages Fehlerhafte Rufnummer des rufenden Anschlusses Ubermittlungsabschnitt unterbrochen Ubermittlungsabschnitt auBer Betrieb Zeit berwachung f r den Zustand P1 abgelaufen Fehlerhaftes Feld des Grundes Fehlerhaftes Feld f r die Angabe von Leistungsmerkmalen Paket enth lt eine Adresse mit einer L nge ungleich Null Unerlaubtes Unterbrechungspaket Unerlaubte Unterbrechungsbestatigung Remarks The description of cause and diagnostic codes is quite short Therefore the following combination of cause and diagnostic codes may give a bit more information when problems occure This table contains some codes which have occured during operation of the X25 component of rvsMVS DIAGNOSTIC PACKET received Diagnostic Reason Code Meaning Possible Error Code hex hex 24 10050B Wrong NPSI generation of your multi channel link or check compatibility with PTT generation too 10 05 13 rvsMVS Messages and Codes 5 rvs Messages CLEAR PACKET received Cause Code Diagnostic Meaning Possible error hex Code hex 00 40 If all SVCs are busy call setup problem 21 24 The dialed X 25 number belongs to a multichannel link
253. nknown Please check your configuration and set the right certificate store type Couldn t obtain enough memory to create the certificate store Ensure that the whole address space and enough memory is available You may wait until another process has finished and freed its memory Internal error The name of the requested certificate is missing Please check your configuration The name of the requested certificate is missing Please check your configuration Internal error Couldn t obtain enough memory to create the keystore Ensure that the whole address space and enough memory is available You may wait until another process has finished and freed its memory The requested keystore is unknown Please check your configuration and set the right keystore type The requested keystore is unknown Please check your configuration and set the right keystore type Internal error Internal error The requested keystore is unknown Please check your configuration and set the right keystore type Internal error Internal error The identifier of the requested keypair is missing Please check your configuration The requested keystore is unknown Please check your configuration and set the right keystore type rvsMVS Messages and Codes 5 rvs Messages 4191001 4191002 4191003 4191004 4191005 4191006 4191007 4191008 4191009 4191010 4191011 4191012 4191013 4201001 4201002
254. normally In this situation the affected controltask should be stopped started again In some cases stop start or the rvs monitor may be required acme SUBTASK NOT ACTIVE Reply to command DS TCP or DS LU62 acme denotes the access method TCP IP or LU6 2 The message indicates that the control task for this component is not active It may be activated by entering the command A RVST or A RVSL rvsMVS Messages and Codes 5 rvs Messages DF3007I DF3008I DF30091I DF3010E DF3011E DF3012I DF3013I DF3014I DF3015I is identical with DF3004I DF30071 is output upon termination of a transmission and remains on the display for the duration specified in the HOLD interval DESC 2 TRACE xxx This message occurs if the command TRACE is entered For description of parameter xxx see rvsMVS Operations Manual f sid xxx READY TO TRANSMIT The modem is waiting for the data link to be made dial switch modem to data INVALID STATION ID sid ENTERED A station related command with an invalid station identifier sid has been entered INVALID LINE nnn FOR STATION sid A station related command has been entered with explicit line specification but line nnn is not allocated to station sid Valid allocations can be determined by means of the operator command X sid L nnn sid nnn sid nnn sid As a reply to the command DL the physical line addresses nnn and the present al
255. not active REJECTED the logical unit dis not accept the BIND request If there is more than one logical unit defined for station sid rvs tries to establish a session to the next logical unit R sid mn rplname ACTIVE AFTER SESSION TERMINATION During termination of a session was encountered that there is at least one VTAM RPL signed as active that means an earlier request send receive or session control request directed from rvs to VTAM could not be terminated by VTAM rplname indicates the RPL which is still active rpglname may be one of the following names OPCRPL SNDRPL1 SNDRPL2 RECRPL or SESSRPL In case of the RPL could not signed as inactive in at least 10 minutes by VTAM the session task terminates with the rvs User Abend 995 R sid mn RPL ALREADY ACTIVE ON request The receive module ended but one RPL within this module is still active a VTAM macro did not yet complete R sid mn INVALID PASSWORD RECEIVED The password received from the remote station is not equal to the expected password specified within your stations table Session has been rejected R sid mn PASSWORD RECVED BUT NO EXCHANGE DEFINED A password has been received from the remote station but password exchange has not been defined rvsMVS Messages and Codes 5 rvs Messages DF9919E DF9920E DF9921E DF9923P DF9931P DF9996E R sid mn PASSWORD EXCHANGE REQUESTED BY REMOTE STATION Session rejected Password exchange
256. nsmitted 036 024 During restart a block number or record number has been specified which exceeds the number of blocks records already received 040 028 A restart has been requested although the data set has not yet been transmitted 044 02C The sequence number of a received line block is out of sequence rvsMVS Messages and Codes 2 rvs User Codes 048 052 056 060 064 068 072 076 080 084 088 092 096 100 104 108 112 030 034 038 03C 040 044 048 04C 050 054 058 05C 060 064 068 06C 070 Error during the try to add a new record to the control data set Error when opening the data set to be transmitted or received During a data interchange with IBM 34 or 36 computer the maximum record length of 2000 bytes has been exceeded Invalid record format specified in the rvs protocol header record H record LRECL or BLKSIZE has not been specified in the rvs protocol header record H record The BLKSIZE specified in the rvs protocol header record H record exceeds the track capacity of the used disk a deblocking is not possible The record count specified in the rvs protocol header record H record does not match the required record number of the rvs protocol answer record A record The data set could not be opened The number of the received bytes or records does not match the byte or record count in the rvs protocol tra
257. o changes of queued send requests are made since last DQ Q command Changes would be that the sending of a datasets is completed or that a new dataset is queued for sending sidl nn vmm sid2 nn vmm sid3 nn vmm sid4 nn vmm sid5 nn vmm This message is displayed after one of the commands described in DF4903I The message shows the number of active send requests nn for the station sid and the changes since last DQ Q command with V or for increase or decrease of the number of queued send requests mm number of queued send requests SID NOT FOUND IN STATION TABLE This message is displayed after a DQ sid command if the station table of the running rvsMVS does not contain the station sid rvsMVS Messages and Codes 5 rvs Messages DF4908I sid nn vmm component component This message is displayed after the command DQ sid The message shows the number of active send requests nn for the station sid and the changes since last DQ Q command for the rvsMVS component component with V or for increase or decrease of the number of queued send requests mm number of queued send requests DF4910I FUNCTION NOT ACTIVE This message is displayed after one of the commands described in DF4903l and the component is not started DF5001 A Q DF5001 A Q DF5001 I Q DF5001 I Q DF5001 I Q DF5001 I Q DF5001 I Q DF5001 I Q f sid i dsname VOL volume status
258. o introduce this parameter the specified command will be ignored See the description of the rvs startparameter VOLUME or the rvs command VOLUME for more information sna DF3043I CURRENT SOFTWARE DOES NOT INCLUDE x25 SUPPORT asc You wanted to start a component of rvsMVS which is not included in your rvs installation A list of the included components is displayed when you start the rvsMVS monitor see DF3046lI DF3044I EXPIRATION DATE OF CURRENT SOFTWARE ddd yy The used rvs load library contains an expiration date Such a date may be included in load libraries for test installations If this date has expired the rvs Monitor does not perform any action The monitor will stop just after it has been started To solve this situation a new load library is required DF3045E COMMAND REJECTED USE OF cmp COMPONENT NOT INDICATED A command related to the component cmp has been entered but either the component is not included in the software or the use of this component is not specified as an rvs startparameter for example X25USE aYES NOU or the use of the component is not allowed because of licence key restrictions The specified command is rejected shipped DF3046I ACTIV COMPONENTS list of components lactive J Included active components of rvsMVS may be SNA BSC X25 LU62 TCP IP or combinations This message will be issued at monitor start time before and after check of licence and parameters DF3047I U 111
259. ode for more information Couldn t open SYSIN to get input parameter Please check your configuration and try again There are more parameter required to fulfil the requested operation Please check your configuration and try again There are more parameter required to fulfil the requested operation Please check your configuration and try again There are more parameter required to fulfil the requested operation Please check your configuration and try again There are more parameter required to fulfil the requested operation Please check your configuration and try again The requested command isn t supported Please check your configuration and try again Couldn t initialize the security framework Read the cryptlib error code for more information Couldn t cleanup memory after execution Read the cryptlib error code for more information Couldn t cleanup memory after execution Read the cryptlib error code for more information Couldn t end the security framework Read the cryptlib error code for more information Couldn t initialize the security framework Read the cryptlib error code for more information Couldn t cleanup memory after execution Read the cryptlib error code for more information Couldn t cleanup memory after execution Read the cryptlib error code for more information Couldn t end the security framework Read the cryptlib error code for more information Couldn t initialize the security framew
260. ol dataset in order to perform initiate autodial functions or sending of datasets on SNA sessions A list of these send requests is kept in core until next reading of send requests EERP is done refresh of this list Since version A22 of the Dispatcher in this message are included some new values tttt tt really refresh time jii value of DSPTI parameter jjj value of DSPTIW parameter standard value 5 sec xxxx number of entries in internal KD dataset of Dispatcher yyyy number of entries in external KD dataset of Dispatcher END OF SEND REQUESTS SELECTION xxxx aaaa bbbb cccc zzz The dispatcher subtask ended dispatching cycle DSPTI value From xxxx number of entries in internal KD dataset aaaa number of entries that were completed during dispatching time bbbb number of entries that were in use transmission in progress cccc number of entries that were free zzz active Dispatcher trace D active flag T DISP 1 active flag T DISP1 2 active flag T DISP2 L active flag T DISPL for LU6 2 component X active flag T DISPX for X 25 component DD sid name status reason This message is a response for the command DD sid which displays a list of all send requests for the remote station sid name denotes the name of the dataset to be sent up to 26 chars Field status shows information about the status of the send request the following self explaining values may be displayed RE
261. ol task when a Start Session ld SSID protocol unit has been received and either the connecting station is unknown or an invalid password was received In the message is shown the connecting station code and a reason code which is 03 unknown station or 04 invalid password F sid accm sessonid ATTRIBUTE MISMATCH FOR STATION ID odette code This message is issued by the Odette File Transfer Protocol task when Start Session ld SSID protocol units has been exchanged and the stations attributes have been merged During the merge process it was found that the station attributes prevented a session continuation The message shows the Odette code for the partner station Z sid accm sessonid END OF SESSION ESID CODE rvsMVS Messages and Codes 5 rvs Messages This message is issued by the Odette File Transfer Protocol task when an End of Session ESID protocol unit has been sent or received In the message the code used in the ESID protocol unit is shown code reason 00 normal termination 01 command not recognised 02 protocol violation 03 user code not known 04 invalid password 05 local site emergency closedown 06 command contained invalid data 07 NSDU size error 08 resources not available 09 time out 10 mode or capatibility error 11 invalid challenge response 12 auth request incompatible 99 unspecified abort DF9410E Z sid accm sessonid UNEXPECTED FPDU RECVD STATE nn IC mm This
262. olume volume terminated nnn records have been received status may be KEEP The transmission ended normally the displayed END 4 disposition has been executed lcATLG CANCELLED The transmission has been cancelled by operator ABEND xxx yyy The transmission terminated abnormally Xxx system completion code yyy user completion code R sid mn DYN UNALLOC CODE xxxx yyyy If at start of receiving the data set is already allocated this data set will be unallocated and than once again allocated The message displays the error and info code of the unallocation R sid mn RECEIVED RECORD LENGTH nn LARGER THAN BLOCKSIZE mm The length of the received record nn is inconsistent with the blocksize mm and the record format not spanned specified by the transmitting station at beginning of the transmission R sid mn DATA SET COULD NOT BE OPENED The OPEN macro executed for the data set to be received failed R sid mn dsname INVALID FIELD field value IN HEADER The received rvs header record contains a field field with an invalid value value R sid mn EFFECTIVE SPEED IS nnn BPS rvsMVS Messages and Codes 5 rvs Messages This message appears during rvs trailer record processing at the end of a receiving sending process nnn indicates the average speed value during the whole duration of transmitting the data set DF3731I R sid mn REMOTE STATION NOT AUTHORIZED TO SPECIFY PROCESSING OPTIONS A da
263. on code 01 invalid file name 12 gt SFNA RETRYSN received with reason code 02 invalid destination 13 gt SFNA RETRY amp N received with reason code 03 invalid origin 14 gt SFNA RETRYSN received with reason code 04 invalid storage record format 15 gt SFNA RETRYSN received with reason code 05 max record length not supported 16 gt SFNA RETRYSN received with reason code O6 file size too big 20 gt SFNA RETRYSN received with reason code 10 invalid record count 21 gt SFNA RETRYSN received with reason code 11 invalid byte count 22 gt SFNA RETRYSN received with reason code 12 access method failure 23 gt SFNA RETRYSN received with reason code 13 duplicate file 24 gt SFNA RETRYSN received with reason code 14 file direction refused 25 gt SFNA RETRYSN received with reason code 15 cipher suite not supported received with reason code 16 encrypted file not allowed received with reason code 17 unencrypted file not allowed received with reason code 18 compression not allowed 29 gt SFNA RETRYSN received with reason code 19 signed file not allowed 80 gt SFNA RETRYSN received with reason code 20 unsigned file not allowed 81 gt File signature not valid 32 gt File decompression failed 83 gt File decryption failed 34 gt File processing failed 85 gt Not delivered to recipient 86 gt Not acknowledged by recipient 5
264. on does not accept such kind of file receive capability not indicated whithin SSID e g PDS or retain U Format option The send request is cancelled The name of the file which was sent received is invalid The destination of the transmission is invalid The origin of the transmission is invalid The record format of the file isn t supported The maximal record length of the file isn t supported The size of the file is too big The sent record count is invalid The sent byte count is invalid Access method error Duplicate file name Restriction error ULS Permission error ULS Transmission rejected by receiver security functions not supported Transmission rejected by receiver unspecified reason Transmission rejected because of security function Transmission abended connection with remote station interrupted Transmission abended encryption error rvsMVS Messages and Codes 2 rvs User Codes 216 OD8 Transmission abended decryption error 217 O0D9 A dataset with the same VDSN and queuing time was already sent to the remote station 218 ODA Try to sent a file as router which was received as OFTP 1 4 2 0 transmission via a OFTP connection with level 1 3 or less 219 ODB Transmission abended ESID with errorcode sent received 220 oDC Transmission abended SFNA sent received 221 ODD Transmission abended EFNA sent received 222 ODE Transmission abended NERP sent received rvsMVS Messages
265. on fails The message shows the ACB name the reason code for open failure and an explanatory text The CTCP task will terminate when the ACB cannot be opened nn ACB CLOSE FAILED ACB RSN This message is issued by the rvs X 25 CTCP task when close of the ACB used for VTAM communication fails The message shows the ACB name and the reason code for close failure The CTCP task will continue termination This message is issued by the rvs X 25 CTCP task when a VTAM SETLOGON request fails The message shows the SETLOGON type START STOP and the VTAM return code The CTCP task will terminate if SETLOGON START is not successful nn FAILED FOR LU REASON rrff SENSE This message is issued by the rvs X 25 CTCP task when a VTAM request fails The message shows the failing request the Logical Unit that issued the request and VTAM return rr rtncde ff fdbk2 and sense code If a VTAM request fails for the X 25 link Logical Unit the CTCP task will start termination rvsMVS Messages and Codes 5 rvs Messages DF9509W DF9510W DF9511I DF9512P DF9513W DF9514W DF9515I DF95161 DF9517P nn SESSION START REJECT NO VIRTUAL CIRCUITS AVAILABLE This message is issued by the rvs X 25 CTCP task in response to an operator Activate station command if no resources are available to handle a call request nn CALL REJECTED DUE TO INCOMPATIBLE FACILITY PACKET SIZE WINDOW SIZE This message is issued by the
266. only It is not in effect for users purpose rvsMVS Messages and Codes 5 rvs Messages DF5N67P DF5N68P DF5N69P DF5N71P DF5N72P DF5N80P DF5N99P D 2 7 7 7 7 7 7 7 77 7 7 7 7 7 7 77 2 7 72 7 7 7 7 7 7 2 7 7 7 7 7 77 77 77 77 7 7 First 54 characters of the KD record Protocol message only This message is for possible error detection only It is not in effect for users purpose D 2222272272 USED TRANSLATION TABLE ADR aaaaaaaa The message indicates a translation table is used for send request Comp Secr This message is for possible error detection only It is not in effect for users purpose D USED FILE FORMAT VAL aaaaaaaa The message indicates which file format is used for send request Comp Secr This message is for possible error detection only It is not in effect for users purpose D message Message DF5N71P is for possible error detection only It is not in effect for users purpose D message Status Message from the Service Provider Task send request This message is for possible error detection only It is not in effect for users purpose D message Message DF5N80P is for possible error detection only It is not in effect for users purpose p 972727222 2277777 22229777 7 fff This message is issued if an internal modul trace will be processed Protocol message only rvsMVS Mes
267. ons Manual Appendix for a description of PDS transfer mn denotes the session SNA or the line address BSC which was used for receiption of this file R sid mn ALLOCATION ERROR XXXX YYYY FOR DSN dsname A dataset has been received from station sid The received dataset is an unloaded PDS which must be loaded again rvs cannot load the received PDS because an allocation error for the PDS dsname has occurred for the error code xxxx and the info code yyyy see for example the IBM manual OS VS2 SPL Job Management The transmission will be terminated abnormally See rvsMVS Installations Manual Appendix for a description of PDS transfer mn denotes the session SNA or the line address BSC which was used for receiption of this file R sid mn ALLOCATION ERROR XXXX YYYY FOR SYSPRINT FILE A dataset has been received from station sid The received dataset is an unloaded PDS which must be loaded again rvs cannot load the received PDS because an allocation error for a workfile sysprint file used for loading has occurred for the error code xxxx and the info code yyyy see for example the IBM manual OS VS2 SPL Job Management The transmission will be terminated abnormally See rvsMVS Installations Manual Appendix for a description of PDS transfer mn denotes the session SNA or the line address BSC which was used for receiption of this file R sid mn NONZERO RETURNCODE OF PDS LOAD A dataset has been rece
268. ork Read the cryptlib error code for more information The keystore already contains a certificate for the given index Overwriting an existing certificate is not allowed An update of an existing certificate can only be done if the new certificate contains the same issuer distinguished name and the same serial number The new validity must be longer than the old one The keystore already contains a certificate for the given index Overwriting an existing certificate is not allowed An update of an existing certificate can only be done if the new certificate contains the same issuer distinguished name and the same serial number The new validity must be longer than the old one rvsMVS Messages and Codes 5 rvs Messages 4211018 4211019 4211020 4211021 4211022 4211023 4211024 4211025 4211026 4211027 4211028 4211029 4211030 4211031 4221001 4221002 4221003 4221004 4221005 4221006 4221007 4221008 KERNIE DF053K CERT ALREADY EXISTS WITH DIFFERENT INDEX KERNIE DF053K COULD NOT CLEANUP CERT IN IMPORT REPLY KERNIE DF053K CRYPT END FAILED IN IMPORT REPLY KERNIE DF053K CRYPT INIT FAILED IN EXPORT CERT KERNIE DF053K COULD NOT CLEANUP CERT IN EXPORT CERT KERNIE DF053K CRYPT END FAILED IN EXPORT CERT KERNIE DF053K CRYPT INIT FAILED IN DELETE KEY KERNIE DF053K CRYPT END FAILED IN DELETE KEY KERNIE DF0
269. output routines or in event of serious errors subtasks of the monitor will terminate with rvs user codes These Codes are indicated by the rvs Monitor They also appear by listing the transmission history by means of program DF078A00 As a rule messages precedes an abnormal condition during a transmission indicating the type of error Code Code decimal hexadecimal Meaning 004 004 Abort because of line error or cancel by operator 008 008 Abend because data cannot be read from input data set or cannot be written to the output data set in most cases the required disk volume cannot be accessed because it is reserved by other jobs Another reason may be the priority of rvs if this priority is too low 012 00C Error during dynamic allocation or a header record has been received containing invalid values 016 010 The requested disk is not mounted or the data set has not been found on the specified volume BTAM 020f 014 An I O error has occurred during reading a data set BTAM The data set has not been found on the specified volume VTAM 024 018 An l O Error occurred during writing to a data set BTAM An l O Error occurred during writing to or reading from a data set VTAM 028 01C An l O Error occurred when a data set is rewound during restart processing 032 020 During restart a block number or record number has been specified which is larger than the number of blocks records of the entire data set to be tra
270. owed by the number of the rvs X 25 CTCP e g DF9401P 05 F sid accm sessonid ODETTE TASK STARTED TYPE type LEVEL level In this case the message belongs to CTCP No 5 DF9401P F sid accm sessonid ODETTE TASK STARTED TYPE type LEVEL level This message is issued by the Odette File Transfer Protocol task when task initialization is complete Shown is the task type which can be INITIATOR RESPONDER a station has been called by rvs in response to an Activate station command an incoming call has been received over the network DF9402P F sid accm sessonid ODETTE TASK STOPPED This message is issued by the Odette File Transfer Protocol task when task termination is complete DF9403I Z sid accm sessonid TIME OUT OCCURED STATE nn IC mm This message is issued by the Odette File Transfer Protocol task when a time out condition has occurred The Odette File Transfer Protocol defines a maximum time interval between the exchange of file protocol units If a file protocol unit is not received within the time interval the connection will be terminated The default value for the time interval is 10 minutes In the message is indicated when the time out occurred by the state and information code values The following state and information code values are defined State Code Description 12 Reset to inact state This state is reached when an outgoing call is made or an incoming call is received but before the Start Session ld S
271. phone address vTAM As a reply to the operator command DX relay station sid2 option byte xx of the stations table see 4 4 access method telephone number and address of the station sid are listed ENVIRONMENT MVS RELEASE rel FMID fmid CPU MODEL mod rvsMVS Messages and Codes 5 rvs Messages This message displays some information about the MVS environment during start of the rvs monitor DF3051E D SID COMMAND REJECTED ANOTHER D SID IS STILL PENDING It is not possible to enter a D sid command when a previous D sid command has not been completed Check for the outstanding reply of the previous D sid command by entering an invalid reply to the rvs monitor e g DF3052E WRONG PARMRECORD TYP 01 IN CONTROL DATASET NO WORKING ALLOWED Severe error in control data set occurred Please contact your software distributor cpu ID EXPIRATION DATE NO USER TEST KEY gt 31 DAYS PROD KEY gt 27 MONTHS PROD KEY NO NAME NUMBER BAY VERSION TEST KEY USER TEST KEY gt 13 MONTHS DF3053E INSTALLATION NOT COMPLETE RELEASE NUMBER PRODUCT NAME PARAMETER M NOT DEFINED PARAMETER K R NOT DEFINED INCORRECT VERSION ALL MONITORS IN USE NOT FOUND SMF SVC LICENCE KEY OTHER J Severe error in installation the licence key is invalid or has expired Please contact your software distributor DF3054E License will
272. program DFO95I nn rvs XOT CTCP TERMINATION COMPLETE This message is issued by the rvs XOT CTCP task when task termination is complete nn rvs XOT CTCP ABEND CODE EP PSW This message is issued by the rvs XOT CTCP task when an abend occurs The message shows the system abend code the entry point of the program and the address where the abend occurred When an abend occurs task termination will be done after all subtasks has been terminated nn XOT SESSION COULD NOT BE STARTED NO VIRTUAL CIRCUITS AVAILABLE This message is issued by the rvs XOT CTCP task in response to an operator Activate station command if no resources no virtual circuits are available to handle a call request nn XOT SESSION COULD NOT BE STARTED NO ODETTE SESSION AVAILABLE This message is issued by the rvs XOT CTCP task in response to an operator Activate station command if no resources no ODETTE sessions are available to handle a call request nn XOT LISTENER COULD NOT BE STARTED NO VIRTUAL CIRCUITS AVAILABLE This message is issued by the rvs XOT CTCP task in response to a start of a XOT listener if no resources no virtual circuits are available to handle a call request nn XOT LISTENER COULD NOT BE STARTED NO ODETTE SESSION AVAILABLE This message is issued by the rvs XOT CTCP task in response to a start of a XOT listener if no resources no ODETTE sessions are available to handle a call request nn OPTION ALL NOT SUPPORTED FOR COM
273. rary is neccessary in order to satisfy the request E g for the the function GETHOSTBYNAME assigning the IP address to a specified host name using name servers the c runtime library is mandatory DF8308P A COMPLETE S P IP ADDR HHH This message is issued by the rvs TCP IP task when an IP connection has been established either after connect or accept The message shows the socketnumber remote portnumber and remote IP address An OFTP task will be started after this event DF8309W SESSION START REJECT NO RESOURCE TCB AVAILABLE rvsMVS Messages and Codes 5 rvs Messages DF8310I DF8311P DF8312P DF8313E DF8314P DF8315I DF8316E DF8317P DF8318P This message is issued by the rvs TCP IP task in response to an operator activate station command if no resources tcb are available to handle a call request A REMOTE STATION NOT READY This message is issued by the rvs TCP IP task when a connect request has not completed successfully The remote partner addressed by IP address and TCP port did not respond A TCP IP SESSION LOST S This message is issued by the rvs TCP IP task when loss of a session has been detected All activities for this connection are terminated A READ COMPLETE S L DATA 2 This message is issued by the rvs TCP IP task when a read macro has completed successfully The message displays the remote station
274. rder to obtain more detailed information about the flow of protocol records This information should be routed to the distributor DF5705W F sid lll INVALID RECORD TYPE X tt RECEIVED RECORD IGNORED A line connection to station sid has been established using line Ill During transmission sending or receiving of a dataset rvs received an invalid record type neither protocol record nor data record rvs ignores this record the transmission will be continued The reason for this error may be e the remote station does not handle the used transmission protocol in a correct way e the transmission protocol which is defined to be used for the remote station sid see member PROGPROF in the rvs tables dataset described in the rvs interface description is not correct This means the transmission protocol defined for station sid does not meet the protocol specifications which the remote station is able to process An rvs trace may be used to obtain more information DF5742E S sid lll TRANSMISSION OF dsname REJECTED DF5743E S sid 111 REMOTE STATION DOES NOT SUPPORT PDS TRANSFER FUNCTION The partitioned dataset with name dsname should be transmitted to station sid on line Ill During start of this transmission rvs detected that the remote station does not support PDS transfer As a result of this situation the dataset cannot be transmitted the send request is placed in hold state and the line connection will be broken
275. rmation about the error according PKCS 1 1error values XX encryption task number This message is issued when a decryption task has been started rvsMVS Messages and Codes 5 rvs Messages DFV302P DFV303P DFV306P DFNVO7E DFV308E DFV309E DFV310E DFV311E XX decryption task number 22222222 a decryption task version XX OFTP2 DECRYPTION TASK ENDED This message is issued when a decryption task has been terminated XX decryption task number XX OFTP2 DECR SID sid VDSN datasetname This message is issued after a decryption task has been started It shows the corresponding station ID and virtual dataset name XX decryption task number sid station ID datasetname virtual dataset name XX SECURITY FUNCTION ENDED SUCCESSFULLY This message is issued if the decryption function has been ended without errors XX decryption task number XX SECURITY FUNCTION FAILED RC DEC This message is issued if the decryption function has failed XX decryption task number AHHH internal error number of the security function For mor information refer description of internal error numbers XX 9 7272 7 7 0 2 2 7 777 7 7 7 7 7 77 777 7 7 7 77 77 77 7 This message shows a description of the error number of message DFV307E XX encryption task number XX ERRNO This message shows the ERRNO the system returns in case of errors XX decryption task number THRHH
276. rred within the dispatcher routine DF3024I ROUTING CODE WILL BE CHANGED TO xx This message is issued as a reply to command ROUT xx All following rvs messages will be issued with routing code xx This message is issued during rvs start when specifying another routing code than 08 in parm entry DF3025I V sid nnn AVERAGE SPEED IS nnnn BITS s This message is issued as a reply to command DV or V sid and indicates the cumulative transmission speed since the start of transmission of the current data set The precision of the speed determined largely depends on the duration of the transmission DF30261 DISPATCHER SUBTASK STILL ACTIVE rvsMVS Messages and Codes 5 rvs Messages DF3027E DF3028I DF3029E DF3030E DF30311I DF3032I DF3033I DF30341I DF3035I DF3036A The command A DSP has been entered to start the dispatcher subtask The message indicates that this task is still active the command will be ignored f sid PROGRAM PROFILE NOT FOUND LINE ASSOCIATION TERMINATED Error in the definition of the station table or in the definition of the program profile table rvsvTAM Y irvsX25 SNAP DUMP TAKEN sid 111 lrMop J A SNAP DUMP has been taken either for the VTAM control task X25 control task Remote Operator control task or for the BSC line control task of station sid line III A sid NO LINE AVAILABLE The command A sid has been utilized for activation No stat
277. rvs Messages STARTED DF09011 FTP TRACE TASK VERSION vvv dd mm yy tt mm sToPPED aa bb cc Start or end message of FTP Trace routine This program is started just after start of the FTP Main Task vvv specify version of FTP Trace Task dd mm yy tt mm time of assembly aa bb cc time of last changes in the FTP Trace Task STARTED DF0902P FTP TRACE FOR STATION sid STOPPED A trace for an FTP station was started stopped DF0903E DYNAMIC ALLOCATION DEALLOCATION ERROR XXXX XXXX FOR FTP TRACE DATASET The message shows the error and info code of allocation deallocation of trace data set DF0904E ERROR DURING OPEN TRACE DATASET The trace data set could not be open DF1001E f sid DATA SET NOT CATALOGED RC rc The monitor has attempt to catalog a received data set During the execution of the CATALOG macro the return code rc occurs See SPL OS VS2 Data Management for explanation of the return codes DF10021I f sid DATA SET HAS BEEN UNCATALOGED A data set is uncataloged after being queued for transmission DF1030P f sid DEMIGRATION PROCESSING STARTED FOR dsname A migrated data set is to be allocated either the file to be sent or a file to be replaced during receiving and startparameter DEMIG HSM has been specified dsname denotes the virtual filename of the transmission Demigration processing is handled in the same way as an allocation error After in
278. rvs Senise COdas s icciicice cds ueceEuc nun Ea EussEpinEncEE EU RUE ERE PU REEERUP RUNE 22 Dynamic allocation errors eeeeeeeees eene enne nnne nnne nnne rn nn nenne nns 23 FVS LIII PPP 24 X525 Cause Codes rented Ire euneeeanteeasttyrenceestecersteerssestestececcute 226 5 1 1 Cause Codes within clear indication packet sssssssss 226 5 1 2 Cause Codes within reset indication packet sss 227 5 1 3 Cause Codes within restart indication packet sss 227 X 25 Diagnostic Codes er aa a aaar aaa aE aaa ani ar Eaa aeaeaei ani ais 227 5 2 1 Diagnostic Codes from the DCE sssssssseeeeneenenenens 227 5 2 2 Diagnostic Codes from the DTE sssssssssseeeeeenneenennnns 228 5 2 3 Diagnostic Codes from the network 230 FVS Start Messaduj8S cocian eco aes ee ia cime Fl rox CR n an e 234 rvsMVS Messages and Codes 1 Introduction This page will be intentionally empty rvsMVS Messages and Codes 1 Introduction 1 Introduction This manual describes Messages User Sense Codes and Abend Codes of rvsMVS rvsMVS Messages and Codes 1 Introduction This page will be intentionally empty rvsMVS Messages and Codes 2 rvs User Codes 2 rvs User Codes In event of an error during transmission of data sets rvs user codes are set by data input
279. rvs X 25 CTCP task when a call setup is rejected due to incompatible X 25 packet or window size The values shown are taken directly from the call packet Please refer to X 25 documentation for further explanation nn CLEAR RECEIVED STATION CAUSE DIAG This message is issued by the rvs X 25 CTCP task when an X 25 Clear indication is received The message shows the X 25 clearing cause and diagnostic code For cause code and diagnosis code see chapter 6 of this manual nn CALL CONFIRM RECEIVED FROM STATION This message is issued by the rvs X 25 CTCP task when an outgoing call on the X 25 network has been confirmed by the calling address The called station is indicated in the message nn INCOMING CALL REJECTED NO RESOURCES AVAILABLE This message is issued by the rvs X 25 CTCP task when an incoming call on the X 25 network has been rejected because of no resources available to handle the call request nn RECEIVED ON SESSION CAUSE DIAG This message is issued by the rvs X 25 CTCP task when an X 25 Clear or Reset packet is received on an active session The message shows the Logical Unit name and the station id of the virtual circuit on which the Clear or Reset was received and the clearing cause and diagnostic code as found in the packet If the clearing cause and diagnostic code are FF an Invitation to Clear PAD message has been received and the CTCP will send a Clear request for the session For cause co
280. s f sid mn SEND r RECORD FAILED SENSE ssss uuuu see DF9105E S sid mn text see DF9106E f sid mn text The error message text has been received from the remote station This message occures most times in conjunction with an abnormal terminated data set transmission S sid mn rvs PROTOCOL VIOLATION RECORD IGNORED A rvs protocol record has been received from the remote station sid This record is not within the rules of the rvs protocol The record will be ignored a just active data set transmission will be terminated S sid mn DISK READ PROGRAM ERROR SYSTEM sss USER uuu TRANSMISSION CANCELLED The module which is reading data from disk terminated with system completion code sss and user code uuu The transmission will be cancelled S sid mn LOGICALLY INVALID RECORD RECEIVED The contents of a just received rvs protocol record does not match the contents e g data set name ready time of the assigned rvs control data set record The transmission will be terminated S sid mn KD RECORD NOT FOUND During initialization of a transmission after reception of an rvs protocol record type A no assigned rvs control data set record with an active send request has been found in the control data set S sid mn dsname nnnnnnn RE VOL volume END KEPT Status report at end of transmission after trailer record has has been transmitted nnnnnnn number of transmitted data records S sid mn INVALID
281. s and Codes 5 rvs Messages The temporary dataset with timestamp dsname has been renamed to its final name but could not be uncataloged DF88Y4P 7 KDUPDAT 88Y 27 TYP This message is issued by the FTP task List internal action of FTP task with KD control file For internal use only STARTED DF8900I FTP MAIN TASK 1 b VERSION vvv lsTOPPED dd mm yy tt mm aa bb cc Start or stop of FTP Main Task message vvv specify version of FTP Main Task dd mm yy tt mm time of assembly aa bb cc time of last changes in the FTP Main Task DF8903E FTP ABEND CODE EP PSW This message is issued by the FTP Main task when an abend occurs The message shows the system abend code the entry point of the program and the address where the abend occurred When an abend occurs task termination will be done after all subtasks have been terminated DF89041I REGS 0 7 DOXXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX This message is issued by the FTP Main task when an abend occurs The message shows the content of the registers 0 to 7 at the time of abend DF89051I REGS 8 15 xXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX This message is issued by the FTP Main task when an abend occurs The message shows the content of the registers 8 to 15 at the time of abend DF89061I sid MAIN TASK ACTIVE nn DRIVER OR SERVER TASK S This message is issued by the FTP Mai
282. s coded in the program DF151Axx Error during execution of the PUT RPL or SHOWCB macro Should not occur error 1512 5E8 This ABEND is coded in the program DF151Axx Error during execution of the GENCB OPEN ACB or CLOSE ACB macro Should not occur error 1662 67E This ABEND is coded in the program DFO66Bxx The module DFO67A could not be found This module must be available in order to allocate data sets dynamically The module contains data sets and if required passwords of data sets which are to be allocated See rvsMVS Operations Manual rvsDYN macro 1690 69A This ABEND is coded in the program DF169Axx The SYSPRINT DD statement is missing only if used as BATCH PGM 1691 69B This ABEND is coded in the program DF169Axx This abend occurs in different cases i e if no JOB name of the transmitted JCL is not available or if the output data set could not be transmitted or if an error occurs during execution of the RDJFCB macro or if the OPEN of the input or output data set fails 1720 6B8 This ABEND is coded in the program DF072A00 PDF00144 This abend indicates that the rvs Control Data Set is damaged The rvs Control Data Set must be recovered Procedure PDF0015A Before running Procedure PDF0015A the SHAREOPTIONS Parameter used for definition of the Control Data Set should be checked the value must be SHR 4 3 1723 6BB This ABEND is coded in the program DF072A00 Open error in module DF172A00 PDF00154 1730 6C2 This
283. s kept on the screen until the first data bytes have been transmitted S sid mn RESTART COUNT EXCEEDS TOTAL AMOUNT OF RECORDS IN THE DATA SET The data set consists of less records than the restart count specified by the receiving station Any restart is impossible the send request is set into the HOLD status S sid mn DATA SET NOT FOUND ON SPECIFIED VOLUME The data set to be transmitted see DF36011 is not located on the specified volume S sid mn VOLUME volume IS NOT MOUNTED Access to the data set to be transmitted is not possible because the required volume is not mounted or not online S sid mn RECORD LENGTH EXCEEDS BUFFER LENGTH TRANSMISSION NOT POSSIBLE The transmission of the queued data set shall be executed in an unblocked mode The record length exceeds the buffer size of 2000 bytes That s the reason why a transmission is impossible The data set will be placed in a HOLD status rvsMVS Messages and Codes 5 rvs Messages DF3607E S sid mn DYNAMIC ALLOCATION ERROR ERR xxx INFO XXXX An error occurred during data set allocation For error reason code ERR and info reason code INFO see IBM manual OS VS2 MVS SPL Job Management DF3609E S sid mn REMOTE STATION DOES NOT SUPPORT PDS TRANSFER FUNCTION A partitioned data set PDS is to be transmitted but the remote station does not support this function either the remote station has not installed rvsMVS or has installed an older release of rvsMVS w
284. s message is issued by the rvs TCP IP task when the option ALL has been used for a command for which this option is not supported INVALID COMMAND PARAMETER This message is issued by the rvs TCP IP task when an invalid parameter is used with an issued command ODETTE TASK HAS BEEN POSTED S SID This message is issued by the rvs TCP IP task when the odette task is posted for termination The socket number and station is shown SPECIFIED STATION This message is issued by the TCP IP task when a command referring to a station is used Either the station could not be found the station was already active for activate command or rvsMVS Messages and Codes 5 rvs Messages DF83291I DF8330P DF83311I DF8332E DF8333W DF8334P DF8335I DF8336E DF8337E the station is not active This message is also used to indicate a pending trace for a station which is not active at this time or stopping of a trace COMMAND OK This message is issued by the rvs tcp ip task in response to a command that has been accepted and executed ODETTE TASK HAS BEEN DETACHED S SID This message is issued by the rvs TCP IP task when the ODETTE task has been detached This message is issued by the rvs TCP IP task in response to a display DS command The message displays the used socket number the current tcb state and the station identification rvs station code and odette station code i
285. sage is shown the VTAM return and sense codes for the failing request Refer to VTAM programming manual for further information DF9736E APPCCMD DEALLOC FAILED FOR RC xxxx SENSE xxxx This message is issued by the rvs APPC task manager routine The APPCCMD DEALLOC was issued to close a conversation with a partner node but the request failed In the message is shown the VTAM return and sense codes for the failing request Refer to VTAM programming manual for further information DF9737E APPCCMD SEND CONF FLUSH FAILED FOR 7 RC SENSE This message is issued by the rvs APPC task manager routine An APPCCMD SEND with CONFIRM or FLUSH option was issued in order to flush the send buffer and get an acknowledgement from the partner but the request failed In the message is shown the VTAM return and sense codes for the failing request Refer to VTAM programming manual for further information DF9738I rvs APPC ACTIVE ACB CSS nnnn CCV nnnn FSS nnnn PCV nnnn This message is issued by the rvs APPC task in response to a Display DS LU62 or LU62 ALL command The message shows the ACB name used by the APPC task and the number of sessions CSS and conversations CCV currently active Also shown is the number of unused sessions FSS and the pending conversations local attached driver subtask PCV DF9739I SID P LU MODE CURS nnn MAXS nnn CONV nnn F xx SESL xxxxxxxxxx
286. sages and Codes 5 rvs Messages This page will be intentionally empty rvsMVS Messages and Codes 5 rvs Messages Messages of the Receive Dispatcher Task DF5VOOI DF5V61P DF5V65P DF5V66P DF5V67P DF5V68P DF5V72P DF5N80P DF5V99P DF5XO1I DF5XO1I D RDS DRIVER TASK This message will be issued by the D command For more explanation refer to message DF52011 Messages DF5V61P until DF5V80P are for possible error detection only They are not in effect for users purpose D 7 2 2 2 2 2 2 2 2 2 The following text may be ATTACH DF310A RC NOT ZERO Operator request CANCEL OPERATOR REQUEST gt 2ND STOP gt EXIT Operator request gt STOP DF310A attach error Status messages of the Service Provider Task Receive Dispatcher D cccccccc Return code message for access to the Security Key data Set with 222222222222222 A RETURN CODE PUB KEY or RETURN CODE PRV KEY cccccccc VSAM return code and program return code p 14Hd POPPPPPPPPPPPP PPP PPP PPP PPP PPP PPP PP PPP IPP Internal file names used by the Service Provider Task Protocol message only D 7 7 2 27 77 77 7 7 7 7 2 2 77 777 7 7 7 7 77 77 7 First 54 characters of the KD record Protocol message only D 2222272272 USED TRANSLATION TABLE ADR aaaaaaaa
287. set because of a wrong private key Correct the keystore or encrypt the data with the right certificate The data may be corrupted Internal error The decryption of the dataset failed because of corrupted data The decompression of the dataset failed because of corrupted data Internal error Couldn t initialize the security framework Read the cryptlib error code for more information Couldn t initialize the security framework Read the cryptlib error code for more information Couldn t initialize the security framework Read the cryptlib error code for more information Couldn t initialize the security framework Read the cryptlib error code for more information Couldn t initialize the security framework Read the cryptlib error code for more information Couldn t set parameter to the security framework Read the cryptlib error code for more information Couldn t obtain enough memory to create the signature output buffer Ensure that the whole address space and enough memory is available You may wait until another process has finished and freed its memory Couldn t obtain enough memory to create the compression output buffer Ensure that the whole address space and enough memory is available You may wait until another process has finished and freed its memory Couldn t obtain enough memory to create the encryption output buffer Ensure that the whole address space and enough memory is available You may wait until
288. sid NO ACTIVE CONTROL RECORD FOUND RESTART IS IMPOSSIBLE An automatic restart took place but the appropriate record in the control data set has been deleted in the meantime Transmission must be restarted by R sid dsname R sid REQUIRED VOLUME volume IS NOT MOUNTED The volume indicated in this message must be mounted for transmission of a data set If this disk volume does not exist the corresponding resident receive record must be changed R sid ALLOC ERROR nn ON VOLUME vvvvvv REQ SPACE ttt DATA SET dsname ttt tracks have been requested on volume vvvvvv for allocation of the data set dsname An error nn has occurred 04 data set already exist on volume To receive the data set on this volume a resident receive entry must be created 08 no space in the VTOC available 12 write read error in the VTOC 20 insufficient space available In case of multiple allocation attempts on other volumes the subtask aborts with RC 12 The user must take care that sufficient space exists on accessible volumes R sid SYMBOLIC UNIT unit NOT DEFINED DATA SET WILL BE STORED ON TAPE An invalid unit name unit has been specified to receive the data set see rvs User Manual The data set will be received on a work volume After receiving it will be copied to tape rvsMVS Messages and Codes 5 rvs Messages DF3508E R sid dsname ALREADY EXISTS ON ALL VOLUMES OF UNIT unit WILL BE STORED ON TAPE The data set dsn
289. sid text This message precedes the message DF3525W text is a message which is passed to rvs by the user exit R sid mn RECEIVING OF dsname REJECTED DUPLICATE FILE The data set dsname shall be received from station sid During start of this transmission rvs detected that e the file to be received is to be cataloged after reception e a cataloged data set with the same name is already existing if the rename function is used the data set with the new name not with name dsname is already existing e the GDG function for this file has not been specified e a replace request for this file has not been specified As a result of these conditions receiving of this file will be rejected R sid EXTENSION OF dsname FAILED The data set dsname is to be received from station sid For the reception of the file the replace function is active this means an already existing data set with this name is to be replaced by the new data set for example the replace parameter has been specified within a resident receive entry But the space allocated by the already existing file is not sufficient to store all data of the new file In this case rvs tries to extend the already existing file allocation of a new file on the same disk with a new name deletion of the existing file renaming of the new file but the extension failed As a result of this error reception of the file will be rejected The file can be received only after the
290. sid EXPECTS dsname DATA SET NOT FOUND The operator of the remote station sid wants to receive the data set dsname However this data set has not been queued for transmission The causes can be e data set has not yet been established e control data set update has no yet been run e data set has already been transmitted but has been lost at remote station e operator at remote station is using incorrect name DF5602E f sid INVALID REQUEST The previous commond for this station was formally incorerrt or cannot be executed DF5603E f sid OPEN ERROR ON ddname Line ddname cannot be opened DF5604P f sid sid2 dsname time HL RESPONSE IGNORED RECORD NOT FOUND The receipt of a high level response end to end control using the dreiecksverkehr function from the next connected station sid2 could not be written to the control data set because there was no fitting control record in the data set dsname is the data set name of the data set which has been transmitted and time is the ready for transmission time of the data set DF5605E f sid INVALID ID sid RECEIVED CORRECT ID REQUIRED TO CONNECT THE LINE The remote station sent an identification sid which is not defined in the station table of the local station The remote station will be not accepted DF5606I f sid lll LINE CONNECTED rvsMVS Messages and Codes 5 rvs Messages DF5608P DF5609P DF5610E DF5611E DF5612E DF5614I DF5615P
291. sk was not ready to accept the request In the message is indicated the task name nn INVALID COMMAND This message is issued by the rvs X 25 CTCP task when an invalid command has been entered The invalid command is indicated in the message nn OPTION ALL NOT SUPPORTED FOR COMMAND This message is issued by the rvs X 25 CTCP task when the option ALL has been used for a command that does not support the ALL option rvsMVS Messages and Codes 5 rvs Messages DF9526E DF9527W DF9528W DF95291I DF9530I DF95311I DF9532I DF9533I DF95341I nn INVALID COMMAND PARAMETER This message is issued by the rvs X 25 CTCP task when an invalid parameter to a used command is detected nn SPECIFIED VCB NOT FOUND This message is issued by the rvs X 25 CTCP task when the Virtual Circuit Block number VCB specified in a command cannot be found nn SPECIFIED STATION This message is issued by the rvs X 25 CTCP task when a command refering to a station is used Either the station could not be found the station was already active for Activate command or the station was not active nn OK This message is issued by the rvs X 25 CTCP task in response to a command that has been accepted and executed This message is issued by the rvs X 25 CTCP task in response to a Display DS command The message shows the ACB name used by the CTCP task and the name of the Logical Unit used for X 25 lin
292. socket number datalength and the first 4 bytes of the received data A INCONSISTANT DATA RECEIVED S EXPECTED LENGTH RECEIVED LENGTH This message is issued by the rvs TCP IP task when a received data buffer had a different length than indicated in its header The connection will be terminated A CANCEL COMPLETE S This message is issued by the rvs TCP IP task when a received data buffer had a different length from that indicated in its header The connection will be terminated The socket number is displayed A IP ADDRESS IHHE THHE THEE PORT IHHHHE This message is issued by the rvs TCP IP task when the open process has completed This message displays the own IP address and the own port number READ ERROR DETECTED LENGTH NOT POSITIVE This message is issued by the rvs TCP IP task when a read macro is to be issued The specified length is not positive the session will be terminated as a result of this error which should not occur NO ACTIVE SCT ENTRY FOUND TCB FOR SOCKET CLEARED This message is issued by the rvs TCP IP task when an tcb has been found and no appropriate sct entry exists ACTIVE ODETTE TASK HAS BEEN DETACHED S SID This message is issued by the rvs TCP IP task when an active OFTP task has been detached rvsMVS Messages and Codes 5 rvs Messages DF8319E DF8320E DF8321P DF8322P DF8323W DF8324P DF8325W DF8326E DF83
293. ssage is displayed as a response for the command DQ If no outstanding send requests are found in the control data set the first message is displayed If send request have been found message DF4901I or DF4906I or DF4908l will be displayed The end of this display is indicated by the above message which shows the number of all send requests in summary kkk kkk message string kkk kkk rvsMVS Messages and Codes 5 rvs Messages DF4903W DF49041 DF4905I DF4906I DF4907I This message is the headline of the messages DF4302I DF4304l DF4305l DF43061l and DF4308l It is a response of a DQ B DQ V DQ L DQ X DQ T or a DQ sid command In this message the string message string could be KD STATIONS ONLY Or cccccec STATIONS with cceccc description BTAM BTAM VTAM lvram LU6 2 active send request for Lu6 2 bstation s X 25 Ix 25 SID J lsia J changes of active send requests COMPONENT NOT ACTIVE This message is displayed after one of the commands described in DF4903l and the component isn t started SID NOT FOUND IN STATION TABLE EXIST KD RECORD This message is displayed after a DQ sid command if the station table of the running rvsMVS does not contain the station sid But active send requests are queued in the control dataset of the running rvsMVS kkk k k k NO CHANGES KKKKKK This message is displayed after a DQ Q command if there were n
294. ssage is issued if the encryption function has failed XX encryption task number THHHHHHHE internal error number of the security function For mor information refer description of internal error numbers XX 2 7 7 7 7 7 7 7 7 77 77 7 7 7 7 7 7 7 7 7 7 7 7 72 7 77 7 7 7 7 7 7 77 7 77 77 77 77 7 This message shows a description of the error number of message DFN307E XX encryption task number XX ERRNO This message shows the ERRNO the system returns in case of errors XX encryption task number THHHHHHEE the ERRNO XX 7 72 7 7 0 2 7 77 7 7 7 7 7 2 7 77 777 7 7 7 7 777 77 This message shows a description of the ERRNO of message DFN309E XX encryption task number This message is issued if a code translation table was configured but could not be found XX encryption task number 22222922 the used code translationtable XX REMOTE STATION ID NOT FOUND IN STATION TABLE This message is issued if the station ID for which the encryption was started could not be found in station table XX encryption task number 9 the station ID XX CRYPTLIB ERROR NUMBER DEC This message is issued if the encryption function has failed XX encryption task number rvsMVS Messages and Codes 5 rvs Messages DFN314E DFN315E DFN316E DFN340E DFN350E DFN360E DFN370E DFV301P HAHAH internal error number of the security function library cryptlib For
295. ssages and Codes 5 rvs Messages 4221031 4221032 4221033 4221034 4221035 4221036 4221037 4221038 4221039 KERNIE_P15KEYST_ ERROR_DURRING_ GENERATE_KEYPAIR KERNIE_P15KEYST_ ZERO KEYSTORE POINTER IN DEL KEY KERNIE P15KEYST ERROR DURRING DELETE KEYPAIR KERNIE P15KEYST ERROR DURRING DELETE KEYPAIR NOTFOUND KERNIE P15KEYST ZERO KEYSTORE POINTER IN IMPORT REPLY KERNIE P15KEYST ERROR DURRING IMPORT REPLY KERNIE P15KEYST ERROR DURRING IMPORT REPLY DUPLICATE KERNIE P15KEYST ERROR DURRING IMPORT REPLY WRONGCERT KERNIE P15KEYST MAX INDEX NUMBER EXCEEDED OFTP2 cryptlib error codes Could not generate a new keypair Read the cryptlib error code for more information Internal error Couldn t delete the keypair Read the cryptlib error code for more information Couldn t delete the keypair because it wasn t found in the keystore Check your configuration and try again Internal error Couldn t import the reply into the keystore Read the cryptlib error code for more information Couldn t import the reply into the keystore because a certificate with the given index is already present An update is only possible if the new certificate has a longer validity Couldn t import the certificate into the keystore The certificate may be corrupted Please check the certificate and try again The maximum number of keypairs in the keystore exceeded You may delete ke
296. ssions to non IBM computers A data set can t be transmitted because the length of the data record which is just transmitted is larger than the length of the available line buffer The maximum length of the line buffer is 2048 bytes so it is not possible to transmit data sets with a record length of more than 2048 bytes The current value of the station dependent line buffer length is defined within the rvs Stations Table parameter LBLKSIZE see Installations Manual and may be modified with the command F sid SIZE nn see Operations Manual After this message the transmission is aborted with the user completion code 346 The status of the send request is changed from the active to the hold status So an automatic start or restart is prevented f sid DATA SET NOT FOUND ON SPECIFIED VOLUME The data set to be transmitted see DF3400l is not located on the specified volume A system completion code of 213 is written into the assigned control data set entry The status of the entry changed from the active to the hold status So an automatic start or restart is prevented Causes can be e Incorrect data set name or incorrect volume number was specified during queuing for transmission e The data set has been deleted in the meantime S sid VOLUME volume IS NOT MOUNTED Access to the data set to be transmitted is not possible because the required disk is not mounted not online S sid SPACE nnnnn mmmmm TRKS During start to transmit a data se
297. ssued by the FTP Main task when Client or Server task ended with error abended For internal use only KDUPDAT 89F 2 TYP This message is issued by the FTP Main task List internal action of FTP Main task with KD control file For internal use only 7 7 27 777 7 7 7 2 27 77 7 See DF88Y3P FTP control file name This message is issued by the FTP Main task if FTP control file s is are found DATASET NOT RENAMED ENQUEUE ON SYSDSN FAILED This message is issued by the FTP Main task when enqueue on sysdsn failed rename error internal cod X 040B0426 22722222 This message is issued by the FTP Main task trace routine Shown is the name of FTP Main task subroutine that gets control rvsMVS Messages and Codes 5 rvs Messages For internal use only rvsMVS Messages and Codes 5 rvs Messages This page will be intentionally empty rvsMVS Messages and Codes 5 rvs Messages Messages of the SNA LU6 0 Control Task DF90001I DF9001E DF9003I DF90041I DF90051I DF9006P DF9007E DF9008E DF9009E VTAM SUBTASK STARTED This message is a response to the command A rvsV It indicates that the rvs VTAM control task is successfully activated command INVALID COMMAND This message is a response to an invalid command The command command has an invalid syntax ACB OPENED APPLID applid After starting the rvs VTAM control task the AC
298. t initialized This ABEND is coded in the program DFO054Kxx The rvsKEYLOG Data Set is full This ABEND is coded in the program DFO054Kxx The installation exit DFUX001 ended with a nonzero return code This ABEND is coded in the program DF054Kxx An error occurred during access to the rvs control record A record was found in the control data set that could not be de compressed This ABEND is coded in the program DFO66Bxx An error occurred during allocating the rvs control data set or the partitioned data set containing the member stations table This ABEND is coded in the program DFO66Bxx Should not occur error An error occurred during access to the rvs User Data Set A MODCB GENCB or SHOWCB macro could not be executed or the user data set could not be opened This abend may occur if a new User Data Set has been created but not initialized If this abend occurs within the ISPF panels of rvs the reason may be insufficient access authority for the rvs user data set required authorization ALTER This ABEND is coded in the program DF054Xxx The rvs USERLOG Data Set is full This ABEND is coded in the program DFO054Xxx The installation exit DFUX001 ended with a nonzero return code This ABEND is coded in the program DF054Xxx An error occurred during access to the rvs user record A record was found in the control data set that could not be de compressed This ABEND is coded in the program DFO76Axx Invalid internal PAR
299. t to sid the occupied disk space is listed nnnnn Number of occupied tracks mmmmm Number of occupied tracks in 3330 units S sid DYNAMIC ALLOCATION ERROR xxxx An error has occurred during data set allocation For error code xxxx see IBM brochure OS VS2 MVS System Programming Library Job Management S sid DATA SET EXCEEDS ONE 3330 VOLUME COMPRESS REQUIRED rvsMVS Messages and Codes 5 rvs Messages DF3420W DF3421E DF3502E DF3504E DF3505E DF3506E DF3507A The data set to be transmitted exceeds the capacity of a 3330 disk The data set can be compressed in advance by means of program DF081A00 see rvsMVS User s Manual The data set is transmitted anyway This is only a warning message No action required S sid BLOCKSIZE EXCEEDS ONE 3330 TRAK The block size of the data set to be transmitted exceeds the maximum block size used for 3330 disks The data set is transmitted anyway S sid DATA SET EXCEEDS MAXIMUM BLOCK NUMBER TRANSMISSION TERMINATES The data set to be transmitted contains more than 65 535 blocks The transmission is cancelled with return code X 34 uN ALLOC R sid DYNAMIC 1 ERROR xxxx yyyy lALLOCATION A data set shall be has been received from the rvs station sid The output data set could not be allocated unallocated For significance of XXXX Error reason code yyyy Information reason code see IBM brochure OS VS2 System Programming Library Job Management R
300. t will be ignored LINE 111 IS NOT AN AUTODIAL LINE The command DIAL sid lll has been entered But line Ill is not defined as an autodial line within the rvs stations table The dial request will be ignored DSN PARAMETER INVALID OR MISSING COMMAND IGNORED The command FREE DSN dsn been entered But either the required parameter DSN dsn is missing or was not specified correctly The command will be ignored DATASET dsn UNALLOCATED The command FREE DSN dsn been entered The dataset dsn has been unallocated successfully from the address space of the rvs monitor DATASET dsn NOT ALLOCATED TO rvs The command FREE DSN dsn been entered But the dataset dsn is not allocated to rvs No further action is done rvsMVS Messages and Codes 5 rvs Messages DF63041 UNALLOCATION OF dsn FAILED ERROR xxxx yyyy HEX The command FREE DSN dsn been entered The dataset dsn is allocated to rvs But the unallocation request for dsn failed xxxx denotes the error reason code yyyy the info reason code of the unallocation see OS VS2 SPL Job Management or MVS XA System Macros and Facilities Volume 1 for more details DF6305I DATASET INCLUDED IN JOBDATASET CACHE LIST USE COMMAND F JDSLIST INSTEAD This message is displayed as a response to command FREE DSN name Unallocation of the dataset name is requested but the command is not executed because the specified dataset is currently included in the jobdataset ca
301. ta set has to be received from station sid The transmitter of the data set has specified some remote options i e specification of the receive volume The station sid is not authorized for specifications like this The data set will be received normally The parameters specified by the transmitting station are ignored For a definition of station dependent authorization see Installations Manual description of the rvs Stations Table parameter OPTIONS DF37321 R sid mn REMOTE STATION NOT AUTHORIZED TO REPLACE DATA SETS A data set has to be received from station sid The transmitter specified that in case of an already existing data set with equal data set name on receiving station this data set is to be replaced But the station sid is not authorized to do this The data set will be received normally In case of an already existing data set with equal data set name this data set is not replaced For a definition of station dependent authorization see Installations Manual description of the rvs Stations Table parameter OPTIONS DF3733E R sid mn DSN dsname CANCELLED Receiving of the data set dsname has been cancelled by operator DF3734E R sid mn RESTART DATA SET FOR dsname NOT AVAILABLE The data set dsname is to be received by station sid The transmission is a restart The data set allocated during an earlier transmission is not available The reason for this may be e the data set is not disk volume e the d
302. tablished either after connect or accept The message shows the socketnumber remote portnumber and remote IP address An OFTP task will be started after this event SESSION START REJECT NO RESOURCE TCB AVAILABLE This message is issued by the rvs TCP IP task in response to an operator activate station command if no resources tcb are available to handle a call request A REMOTE STATION NOT READY This message is issued by the rvs TCP IP task when a connect request has not completed successfully The remote partner addressed by IP address and TCP port did not respond A TCP IP SESSION LOST S This message is issued by the rvs TCP IP task when loss of a session has been detected All activities for this connection are terminated A READ COMPLETE S L DATA This message is issued by the rvs TCP IP task when a read macro has completed successfully The message displays the remote station socket number datalength and the first 4 bytes of the received data A INCONSISTANT DATA RECEIVED S EXPECTED LENGTH RECEIVED LENGTH This message is issued by the rvs TCP IP task when a received data buffer had a different length than indicated in its header The connection will be terminated A TCLOSE COMPLETE S liHHHii EP 2 This message is issued by the rvs TCP IP task when a received data buffer had a different length from that indicated in its header Th
303. ter input of YES in response to DF2540A the data set could not be scratched because of an error The following information XX Return code yy Scratch status code is explained in the IBM brochure OS VS2 SPL Data Management SCRATCH macro DF2560I D sid REQUEST CANCELLED In response to DF2510A the operator entered END The request is cancelled DF2565I D sid DELETE REQUEST NOT SUCCESSFULL rvsMVS Messages and Codes 5 rvs Messages DF25701 DF25711 DF2580I DF2590I DF2701P In response to DF2590A the operator entered DEL An unexpected error occurred while processing the delete request D sid DATASET NOT UNCATALOGED RC xx In response to DF2540A the operator entered YES that means that the data set is to be scratched and uncataloged if the data set is still cataloged This message indicates that the data set could not be uncataloged xx denotes the returncode register 15 in decimal of the CATALOG macro For a description of this returncode see for example the IBM manual OS VS2 SPL Data Management D sid DATASET TO BE SCRATCHED IS NOT CATALOGED In response to DF2540A the operator entered YES that means that the data set is to be scratched and uncataloged if the data set is still cataloged This message indicates that the data set is not cataloged Thus it can not be scratched or uncataloged The send or receive entry however is deleted D sid NN ACTIVE ENTRIES FOUND After input o
304. the send request will not be changed f sid INVALID PARAMETER VALUE NEWSID sid2 SPECIFIED This message is a response to the command S sid name NEWSID ssid2 The station ID of the remote station should be changed from sid to sid2 but the new station ID sid2 is invalid not defined within the rvs stations table The station ID will remain unchanged F ORT DATASET name JUST TRANSMITTED F ORT JOBNM XXXXXXXX JOBNR XXXXXXXX OWNER XXXXXXXX SYSTEM XXXXXXX For FTP component only This message indicates that the file dsname has already been just successfully transmitted F ORT INVALID REPLY REENTER COMMAND Invalid reply of the command S sid name Please reenter command S sid DSN dsname VOL volume The transmission of the data set dsname is starting In the event of an restart the point at which it takes place is also indicated by RESTARTING ON BLOCK nnn The message remains on display until the transmission of data begins S sid ENTER GO OR HOLD OR A NEW RESTART COUNT This message is issued if the restart counter automatically determined from the transmission varies considerably from the number of blocks already transmitted This message immediately follows the message Df3400I which indicates the restart The difference can be determined by N sid S name The following possible actions can be taken GO The restart is to take place as indicated in DF3400I HOLD No restart to be executed S sid n
305. tine when a session start was successful with partner sid The message also shows the partner LU name and the used mode name APPCCMD DACTSESS FAILED FOR RC xxxx SENSE xxxx This message is issued by the rvs APPC task manager routine A VTAM APPCCMD DACTSESS was issued to reject a new session with the partner indicated in the message but the request failed In the message the VTAM return and sense codes for the failing request are shown Refer to VTAM programming manual for further information SESSION REJECT FOR LU MODE REASON This message is issued by the rvs APPC task manager routine when a session start request has been received The request to start a session is rejected due to the reason indicated in the message The message also shows the qualified network name of the partner and the mode used This message is issued by the rvs APPC task manager routine A VTAM APPCCMD CNOS request was issued to change the session limits to a partner node but the request failed In the message is shown the VTAM return and sense codes for the failing request Refer to VTAM programming manual for further information VTAM REQUEST FAILED REQ REASON SENSE rvsMVS Messages and Codes 5 rvs Messages DF9719P DF9720P DF9721P DF9722P DF9723P This message is issued by the rvs APPC task manager when a VTAM request fails during request completion The message shows the failing request an
306. tion indicates the reception of a faulty block TIMEOUT The remote station does not answer LOST DATA The control unit has received more data than expected If this occures frequently the control unit is probably incorrectly generated LINE I O ERROR AIlother line errors DF5619E f sid lll TRANSMISSION TERMINATED DUE TO REMOTE ABNORMAL CONDITION At the remote station an error has occurred requiring the abort of the current transmission Message DF56141 usually follows DF5620P f sid lll dsname RESPONSE IGNORED During the normal termination phase of a transmission the receiving station sends the RESPONSE record rvs line protocol record This RESPONSE record is to be ignored because there is no fitting AS record with the data set name dsname in the control data set of the transmitting station Either the RESPONSE record has been generated with the wrong dsname by the receiving station or the control data set of the transmitting station is in error DF5621A A 111 READY TO TRANSMIT The transmission can start Dial the desired station and press the data button DF5622I A sid lll TRANSMISSION ENDED The transmission of data with the corresponding station has terminated DF56214 follows if P sid or C sid was not entered previously DF5623A f sid lll INTERVENTION REQUIRED ENTER A COMMAND TO RETRY THE CONNECTION The hardware connection between the control unit and the modem has been interrupted After elimina
307. tion of the fault a station related command e g M sid or Q sid must be entered in order to restart the transmission DF5624E xf sid 111 TRANSMISSION OF dsn REJECTED BECAUSE OF EXIT DFUXOO1 see message DF1601E rvsMVS Messages and Codes 5 rvs Messages DF5625E DF5626P DF5628A DF5629P DF5630P DF5631P DF5632E DF5633E DF5634E DF5635P DF5636P f sid COMMAND NOT SUPPORTED This message appears if one of the commands M sid Q sid or R sid is entered and the remote station does not support the full rvs line procedure In this case the commands cannot be executed f sid lll INVALID FEATURE XX IN A RECORD The feature bytes represents the transmission mode i e is compression to be performed or not between the actual transmitting and receiving station The transmission mode will be determined during the rvs protocol record exchange l A record exchange The reason for this message is an program error of the transmittin or receiving station f sid VOL nnnnnn NEEDED BUT CURRENTLY NOT REACHABLE The transmission stops because the monitor cannot access the volume nnnnnn because it is reserved by another CPU The transmission is continued as soon as the disk is released Eno HAVE sid 111 b TEST RETURN CODE nnnn DSN dsname ipeo luse J The occurence of ENQ and DEQ macros is listed for error analysis f sid 111 dsname FILE HAS ALREADY BEEN TRANSMITTED volume An entry of th
308. to the initial status INACTIVE of the stations entry Set the status to ACTIVE COMMAND REJECTED TERMINATION OF rvs TCP IP IN PROGRESS This message is issued by the rvs TCP IP task when an activate command has been entered but termination of the rvs TCP IP task has already started rvsMVS Messages and Codes 5 rvs Messages DF8385I UNSOLICITED EVENT OCCURRED TCP IP ADDRESS SPACE HAS TERMINATED This message is issued by the rvs TCP IP task when the unsolicited event exit is driven by the TCP IP address space The TCP IP address space has terminated DF8399P XXXXXXXX The TCPIP Task issues this message The name of TCPIP Task subroutine that gets control is shown For internal use only rvsMVS Messages and Codes 5 rvs Messages This page will be intentionally empty rvsMVS Messages and Codes 5 rvs Messages Messages of the FTP Receive Control Task DF8500I DF8503E DF85041I DF8505I DF8540P DF8543P DF8546P STARTED D sid sesid FTP SERVER TASK 1 b VERSION lsToPPED vvv dd mm yy tt mm aa bb cc Start or stop of FTP Server Task message vvv specify version of FTP Server Task dd mm yy tt mm time of assembly aa bb cc time of last changes in the FTP Server Task D sid sesid FTP SERVER ABEND CODE EP PSW The FTP Server Task issues this message when an abend occurs The message shows the system abend code the entry point of the program and the address where the
309. transmission protocol to be used and others To determine the reason for this a trace rvs or GTF should be started DF5515E f sid lll RESETPL MACRO FAILED RC X xx Execution of a RESETPL macro failed this error should not occur After this message the line connection will be broken DF5516E f sid lll CONNECTION CANCELLED BECAUSE OF EXIT name An Identification User Exit is installed name denotes the loadname of the exit This exit controlls the identification phase which is performed after the line connection dialling is rvsMVS Messages and Codes 5 rvs Messages established The exit returned a nonzero returncode to rvs as a request to break the line connection This message is followed by message DF5514E DF5517W F sid CONNECTION REJECTED ISTATUS INACTIVE A request for establishing a connection with station sid has been rejected because the stations entry is not released until now ISTATUS can be changed dynamically by the Operator see rvs Operations Manual if neccessary DF5556E F LLL UNACCEPTABLE FUNCTION CODE TO INITIATE I O INTERFACE Line driver call for l O interface with an invalid function code The request cannot be processed and the connection will be terminated User action none contact software distributor Messages of Line Control Program DF056B00 DF5600M f sid 111 message text A message has been received from station sid This message is displayed on console DF5601A
310. ture a posted ECB has not been found The abend indicates an error which should not occur A dump is required for analysis of the problem This ABEND is coded in the program DF130B00 The rvs log data set is completely filled see message DF30164 This ABEND is coded in the program DF130B00 The message output task of the rvs monitor module DF031C terminated abnormally further processing of the monitor is impossible The abend indicates an error which should not occur A dump is required for analysis of the problem rvsMVS Messages and Codes 4 rvs Sense Codes 4 rvs Sense Codes If during an active VTAM session a rvs protocol record is followed by a negative response the rvs protocol record flow will be interrupted and one of the following user sense codes may occur Code Code decimal hexadecimal Meaning 001 001 An unknown or invalid rvs protocol record type has been received 002 002 A record of the Control Data Set has not been found 003 003 The data set to be transmitted is already running in another session 004 004 Invalid feature in H or A rvs protocol record 005 005 Violation of rvs protocol invalid sequence of rvs protocol records 006 006 Transmission cancelled by operator The data set is set in HOLD status 007 007 rvs block check characters of remote and local station are not equal 008 008 Invalid format of a rvs protocol record detected 009 009 Transmission cancelled The remote statio
311. uation remains unchanged for more than one minute message DF1190P is changed to DF1190E to indicate an error situation It should be checked whether the receive dispatcher RDS controltask is active Activation of this controltask may be done by entering command A RDSP R sid RE READ FAILED RRsid dsn This message sid displayed if re read of a resident receive entry read from disk failed This situation may occure if a resident receive entry has been deleted but the monitor internal list of resident receive entries has not been refreshed since that time The message shows the remote station sid and virtual datasetname dsn of the affected entry R sid NONZERO RETURNCODE OF INSTALLATION EXIT DFUX001 R sid ONLY INSTALLATION STANDARDS WILL BE USED TO RECEIVE dsname R sid RECEIVING OF dsname REJECTED BY DFUXOO1 See DF3735W DF3735E R sid RECEIVING OF dsname REJECTED BECAUSE OF NORELAIS dest A data set with name dsname shall be received from station sid For this station the parameter NORELAIS dest has been specified dest denotes the station ID to which routing is to be suppressed In this case receiving of the file with destination dest will be rejected R sid text rvsMVS Messages and Codes 5 rvs Messages DF1193W DF1194E DF1195P DF1195P DF1196P DF1197P DF1197W DF1198P DF1199P DF1199P DF1201E This message precedes message DF1191W text is a message which is passed to rvs
312. ur on a switched line The reason for this situation is not a RESERVED volume caused by another task DF5640E f sid nnn TRANSMISSION TERMINATED BECAUSE OF INCOMPLETE CONNECTION PHASE The transmission to station sid has been interupted because no identification has been received from this station DF5641I JCL DATA SET dsname NOT SCRATCHED RC xx A data set has been received which contains JCL After submission of the JCL the data set normaly has to be scratched In this case it could not be done because of return code xx xx is a return code of the SCRATCH Macro DF5642E S sid lll TRANSMISSION OF dsname REJECTED DF5643E S sid lll REMOTE STATION DOES NOT SUPPORT PDS TRANSFER FUNCTION The partitioned dataset with name dsname should be transmitted to station sid on line Ill During start of this transmission rvs detected that the remote station does not support PDS transfer As a result of this situation the dataset cannot be transmitted the send request is placed in hold state and for switched lines the line connection will be broken The send request for this dataset should be deleted because it cannot be assumed that the remote station will be able to support PDS transfer in the next time This function is supported only by stations which have installed rvsMVS release 1 0 or a following release DF5644W A sid CONNECTION REJECTED ISTATUS INACTIVE A request for establishing a connection with station sid
313. vailable The number of data set blocks is used in order to allocate space at the remote station for the data set to be received b the number of data set blocks exceeds a halfword count value of 65535 Reblock or split the data set 346 15A This ABEND is coded in the program DF034Mxx This code is related to Host non IBM computer transmissions The logical record length of the data set to be transmitted exceeds the maximum blocksize of the line buffer See message DF3412E rvsMVS Messages and Codes 3 rvs Abend Codes 350 351 352 353 354 355 360 370 371 470 490 520 521 15E 15F 160 161 162 163 168 172 173 1D6 1EA 208 209 This ABEND is coded in the program DFO35Kxx For this transmission rvs uses a protocol with data compression and sequence indication of the transmitted data set blocks The ABEND code indicates that the received data set blocks are out of sequence This ABEND is coded in the program DFO35Kxx After data set transmission the number of received bytes is not equal to the number of bytes specified by the transmitter This ABEND is coded in the program DF035Mxx rvs protocol record mismatching A data record has been received without a preceding header record This ABEND is coded in the program DF035Mxx In the rvs protocol header record an invalid record or block length has been specified by the transmitting station This ABE
314. ved on a disk volume which is a member of the unit group unit but all disk volumes of this unit group already contain a data set dsname or there is not enough space to allocate the data set on this unit group As a result of this error the transmission will be terminated the data set dsname cannot be received until the problem with the unit group unit is solved The following action may be done to avoid this situation Delete the data set after processing automatic jobstart Specify a unit group which consists of more disk volumes Use the GDG function if many files with same names are to be received within short time Make sure that there is enough space to allocate files to be received Rm R sid mn RESTART COUNT OF SENDER EXCEEDS RESTART COUNT OF RECEIVER A rvs header record has been received In this record the restart count of the transmitting station exceeds the number of received A new transmission of this file is required R sid mn I O ERROR ON OUTPUT DATA SET NEW TRANSMISSION REQUIRED NO RESTART During output of data records an I O error occurred A restart is not possible A new transmission is required R sid mn I O ERROR DURING RESTART POSITIONING NEW TRANSMISSION rvsMVS Messages and Codes 5 rvs Messages DF3712E DF3713I DF3714P DF3715E DF3716P DF3717E DF3718E DF3719P DF3720E REQUIRED NO RESTART The received data set cannot be read for restart positioning a n
315. vs APPC task when an abend occurs The message shows the content of the registers 8 to 15 at the time of abend ACB OPEN FAILED ACB RSN This message is issued by the rvs APPC task when open of the ACB to use for VTAM communication fails The message shows the ACB name the reason code for open failure and an explanatory text The APPC task will terminate when the ACB cannot be opened UNSOPPORTED VTAM VERSION ACB This message is issued by the rvs APPC task when open of the ACB has completed and the ACB is checked for supported VTAM options The ACB check routine found that the VTAM Function Vector List support was not present indicating a VTAM release earlier than ACF VTAM version 2 The rvs APPC support requires ACF VTAM version 3 2 or later NO VTAM APPC LU 6 2 SUPPORT ACB This message is issued by the rvs APPC task when open of the ACB has completed and the ACB is checked for supported VTAM options The ACB check routine found that the VTAM version used does not support APPC LU 6 2 The rvs APPC support requires ACF VTAM version 3 2 or later ACB CLOSE FAILED ACB RSN This message is issued by the rvs APPC task when close of the ACB used for VTAM communication fails The message shows the ACB name and the reason code for close failure The rvs APPC task will continue termination This message is issued by the rvs APPC task when a VTAM SETLOGON request fails The message shows the SETLOGON type START STOP and the VTAM retur
316. x Invalid internal PARM length Should not occur error 1011 3F3 This ABEND is coded in the program DF075Cxx A blank in the PARM string is not allowed 1012 3F4 This ABEND is coded in the program DF0O75Cxx An invalid keyword name has been specified in the PARM string rvsMVS Messages and Codes 3 rvs Abend Codes 1013 1014 1015 1016 1017 1018 1019 1022 1050 1051 1052 1053 1054 1055 1056 1057 1058 3F5 3F6 3F7 3F8 3F9 3FA 3FB 3FE 41A 41B 41C 41D 4E 41F 420 421 422 This ABEND is coded in the program DF075Cxx An internal text constant in the program output format has been invalid specified Should not occur error This ABEND is coded in the program DF075Cxx characters must be alphabetic This ABEND is coded in the program DF075Cxx characters must be numeric This ABEND is coded in the program DF075Cxx hours the PARM characters must be numeric This ABEND is coded in the program DF075Cxx minutes the PARM characters must be numeric This ABEND is coded in the program DF075Cxx lines the PARM characters must be numeric This ABEND is coded in the program DF075Cxx the list level LVL the PARM characters must be alphanumeric or alphabetic The PARM The PARM If specifying If specifying If specifying If specifying This ABEND is coded in the program DF022Bxx The number of relay stations exceeds the
317. xxxx rvsMVS Messages and Codes 5 rvs Messages DF97401 DF97411I DF9742E DF97441 DF97451I DF97461 DF9780P DF9790P DF9791P This message is issued by the rvs APPC task in response to a Display DS LU62 ANT command The message shows an entry in the Node Table In the message is shown the station id the priority used and the associated LU name and Mode name the current number of sessions the maximum allowed number of sessions and the current number of conversations using this LU Mode conbination Also shown is the current value of the session limit structure Note that the maximum number of sessions is twice the value specified for the station in rvs parmlib This is because each file transfer session requires two APPC sessions This message is issued by the rvs APPC task in response to a Display DS LU62 command The message shows information for an APPC Conversation Driver with the priority p In the message is shown d the transfer direction S send R receive sid the partner station id int cid the internal conversation id created by the LU62 control task sti st2 state informations and the LU Mode name combination used for the APPC conversations TYP SYL PGM TRACE This message is issued by the rvs APPC task in response to a Display DS LU62 ALL command The message shows information for an APPC Conversation Driver In the message is shown the conversation typ the synclevel a
318. y the rvs X 25 CTCP task when the ODETTE task has been detached after termination posted but a corresponding request has not been found nn PACKET SIZE AND WINDOW SIZE HAVE BEEN NEGOTIATED This message is issued by the rvs X 25 CTCP task when an x 25 call packet has been received and flow control parameters have been negotiated nn CALL CONFIRMATION SENT This message is issued by the rvs X 25 CTCP task when an x 25 call confirmation packet is sent The call confirmation is sent in response to a previously received x 25 call request This message is issued by the rvs X 25 CTCP task when the ODETTE task EOT ECB has been posted nn SPECIFIED PARTNER NUMBER INDEX mm NOT DEFINED This message is issued by the rvs X 25 CTCP task if the operator command A SID Cnn Nmm was entered and the specified partner number index mm is not defined in station table entry nn SPECIFIED PARTNER NUMBER INDEX mm NOT DEFINED FOR SELECTED CTCP This message is issued by the rvs X 25 CTCP task if the operator command A SID Cnn Nmm was entered In this case the specified partner number index is defined for the station but not for the specified CTCP This message is issued when the rvs X 25 CTCP task sends an outgoing call packet to a partner station with the specified X 25 number rvsMVS Messages and Codes 5 rvs Messages DF9553P DF9554P DF9555P DF9557P DF9558E DF9559E DF9590P DF9590P DF9591P This message
319. ypairs which are not longer needed The following table shows the cryptlib error codes These error codes come from the 3rd party security function provider CRYPTLIB which is responsible for all the encryption compression signing and enveloping tasks Error code Alias Description 2i CRYPT ERROR PARAM1 eren AE parameter 1 The input for the cryptlib function is 2 CRYPT_ERROR_PARAM2 AN parameter 2 The input for the cryptlib function is 3 CRYPT ERROR PARAM3 pores d parameter 3 The input for the cryptlib function is m CRYPT ERROR PARAM4 PM parameter 4 The input for the cryptlib function is 5 CRYPT ERROR PARAMS oe parameter 5 The input for the cryptlib function is 6 CRYPT ERROR PARAM6 on ee parameter 6 The input for the cryptlib function is 7 CRYPT ERROR PARAM7 von D parameter 7 The input for the cryptlib function is There is no memory left to fulfil the task Please ensure that the 10 CRYPT ERROR MEMORY whole address space is available or wait until another task has finished 11 CRYPT ERROR NOTINITED Data has not been initialized 12 CRYPT ERROR INITED Data has already been initialized 13 CRYPT_ERROR_NOSECURE Operation not available at requested security level No reliable random data available The random number generator 14 CRYPT_ERROR_RANDOM is provided as user exit DFOBSR Please ensure that this module works proberly and returns reliable random numbers 15 CRYPT_ERROR_FAILED Op
320. zation the parameterrecord could not be obtained from the rvs Control Data Set This parameterrecord contains installation dependent parameter values rvs startparameters used by the program The parameterrecord is created updated during each start of the rvs monitor Occurrence of this error may be solved by starting the rvs monitor at least one time before execution of DFO80A00 1801 709 This ABEND is coded in the program DF080A00 The data set which is specified in the SYSPRINT DD statement could not be opened 2401 961 This ABEND is coded in the program DF024Bxx Error in the parm entry of the program DF024A00 This program copies a received data set to a tape or a data set which is to be transmitted to a disk The entries of the members RTAPEJC or STAPEJC in the information file rvs TABLES may not have been made in the right columns 2402 962 This ABEND is coded in the program DF024Bxx The name of the input data set of the copy program DF024A00 is invalid rvsMVS Messages and Codes 3 rvs Abend Codes 2403 2404 3002 3003 3004 963 964 BBA BBB BBC This ABEND is coded in the program DF024Bxx The name of the output data set of the copy program DF024A00 is invalid This ABEND is coded in the program DF024Bxx An invalid volume number has been specified for the input data set which is to be copied by the program DF024A00 This ABEND is coded in the program DF130B00 Error in the ECB struc

Download Pdf Manuals

Related Search

Related Contents

APC Smart 2200VA LCD 230V  SONY CPD-15SF22015-05-09 02:073.2 MB - Wiki Karat  piano di sicurezza e coordinamento  Marquee Railing 31002078 Installation Guide  T16 Stand Alone Manual  Hynix 8GB DDR3 PC3-8500  Bedienungsanleitung FLO 18_30 DC INV  2013 EN/ES - Weissenfels  

Copyright © All rights reserved. Failed to retrieve file