CCT500 CLIP TUNER User Manual
Contents
1. chora www chordmusic co uk CCT500 CLIP TUNER 173 281 User Manual 20 S420 50 On Off Button 50 4 A LCD Screen lt N S N ae A N 7 ff Oy _4 SAI if y A lt lt ea Tuning status display Important Avoid exposure to high temperature direct sunlight moisture strong magnetic fields and corrosive materials Clean only with a dry lint free cloth and avoid rough handling or impact Remove battery when not being used for long periods of time ON OFF button function e Press and hold the ON OFF button for 3 seconds to switch on the tuner e The display will illuminate completely and then enter the tuning mode whichever has been previously selected e Press the ON OFF button momentarily to scroll through the tuning modes instrument types e Press and hold the ON OFF button for 3 seconds to switch the tuner off e f no buttons are pressed and no tuning vibrations detected for 3 minutes the tuner will power down automatically Tuning Switch on and select the correct mode for the instrument that requires tuning see above Clip the tuner onto the instrument where it can pick up vibrations e g on the headstock Rotate the display so that it can be seen during tuning adjustment Play a note and check that the display to see if a note is detected If no note is detected adjust the tuning on the instrument or move the clip to another2. position until a note is detected Adjust the tuning on the instrument until the required note is indicated display shows string number and musical note Tuning accuracy is displayed via a virtual needle which is to the left when the note is flat and to the right when it is sharp When the note Is exactly in tune the needle points to the centre and the backlight changes colour to green Repeat the tuning process for all strings and repeat again if strings need settling in or stretching SPECIFICATIONS Power supply 1 5V button cell CR2032 supplied A4 frequency 440Hz 0 5cent Chromatic Guitar Bass Violin Ukulele AO 27 5Hz to A6 1760Hz 76 x 65 x 26mm 28g Troubleshooting Display does not light or lights very dimly Change battery for a new one Display freezes and will not respond Remove and replace battery after 30 seconds and try functions again Move clip to a new position where vibrations can be detected Tuner cannot detect notes Adjust tuning of instrument up and down in pitch until a note is detected Change battery for a new one if suspected to be low on charge Chord 2011
Download Pdf Manuals
Related Search