Instruction Manual
Contents
1. or Temp button to select a desired room temperature After setting the room temperature is shown in the display in Auto mode the fan speed is changeable Auto mode means that the unit will turn off when the desired room temperature is reached and it will turn on if the room temperature changes again If the room temperature is equal to or above 18 C the unit can cool in the automatic mode At lower temperatures the device will protect the compressor by automatically switching into ventilation mode 4 Dehumidifying operation Press the Mode button till the Dehumidify Indicator Lamp see Figure 4 blinks The unit will set the temperature and the fan speed by itself 5 Timer operation Timer ON setting cooling When the air conditioner is OFF press the Timer button and select a desired ON time through the temperature and time setting buttons ON time can be regulated at any time in 0 24 hours Press the Timer button to confirm your setting Timer OFF setting cooling When the air conditioner ON press Timer button and select a desired OFF time through the temperature and time setting buttons OFF time can be regulated at any time in 0 24 hours Press the Timer button to confirm your setting Timer On setting dehumidifying Choose the dehumidifying mode as described in 4 When the air conditioner OFF press Timer button and select a desired ON time through the temperature and ti2. and is in a closed cooling circuit The coolant does have zero ozone depletion potential but is a so called greenhouse gases under the Kyoto Protocol and may thus contribute to global warming if it is released to the atmosphere Therefore only trained technicians with refrigerant certificate make a filling or emptying Suntec your air conditioner does not have to use if used properly and undamaged coolant circuit can be refilled with refrigerant GWP R410A R32 125 50 50 1975 NOTE CONCERNING PROTECTION OF ENVIRONMENT This product must not be disposed of via normal household waste after its service life but must be taken to a collection station for the recycling of electrical and electronic devices The symbol on the product the operating instructions or the packaging indicate such disposal procedures The materials are recycable in accordance with their respective symbols By means of re use material recycling or any other form of recycling old appliances you are making an important contribution to the protection of our environment Please ask your local council where your nearest disposal station is located
3. rest for at least 24 hours before you start it Name of Parts Figure 1 Lo AT UN lt Spare Parts Figure 2 Qu a 11 1 rear cover 5 caster 9 exhaust pipe 2 air inlet 6 power line 10 flat fixing clip 3 front cover 7 air inlet 11 square fixing clip 4 operation panel 8 air inlet Appearance and Function of Control Panel Figure 3 12 POWER Button 15 timer POWER button 18 water full indicator lamp 13 temperature button 16 temperature button 19 fan speed adjustment button 14 operation mode button 20 LED Window 17 signal receiver window 13 14 15 POWER ee Ta 20 Un O ua 16 17 18 19 Operation Display Figure 4 1 Auto Mode Icon Fan Speed Cooling Mode Temp and Timer Setting Timer on Temperature C oe e e Dry Mode Icon Appearance and Function of Remote Controller Figure 5 21 POWER Button press this button will turn the machine on or off D Nn 22 Temperature setting button this button is used to set the room temperature 7 i 4 Each key press increases the room temperature about 1 C 22 25 23 Speed Button Press this button will choose high middle or low ventilation speed 24 Timer button press to set the timer on or off 23 a 26 25 Temperature setting button this button is used to set the room temperature Each key press reduces the room temperature about 1
4. C 26 Mode Button press this button will choose the function auto cooling cooling or dry Operation Introduction Figure 6 Before starting operations in this section V 2 3 4 5 Find a place where there is power supply nearby As shown in the figure on the right install the exhaust hose and adjust the window position well Insert the power cord into an grounded AC230V 50Hz socket Press the POWER button to turn on the air conditioner After switching on or over the ventilator operates but the compressor starts later Cooling effect may Before using Notice 1 Operation temperature range Check up whether the exhaust hose has been mounted properly Cautions for cooling and dehumidifying operations When using functions on cooling and dehumidifying keep an interval of at least 3 minutes between turning on and turning off Power supply meets the requirements The socket is for AC use Do not share one socket with other appliances Power supply is AC230V 50Hz 2 Cooling operation Press the Mode button till the Cool icon see Figure 4 appears Press the Temp or Temp button to select a desired room temperature 16 C 31 C Press the Fan Speed button to select wind speed After setting the current room temperature is shown on the display 3 Auto Mode Press the Mode button till the Auto icon see Figure 4 appears Press the Temp
5. Progress plus Instruction manual Figure 2 cok J SN EE Figure 4 Figure 1 Figure 3 i L F i j j il i i amp D 5 ff W POWER mee TEED 20 MIE SE TER ii Y Oooo 4 om M SOS i 16 17 18 19 Figure 5 Figure 6 Figure 7 21 POWER TIMER 24 I J TEMP TEMP 22 f j f 25 EED MODE T pan aa ee 23 26 Figure 10 Figure 8 Please read this user s manual carefully to ensure proper use maintenance and installation SPECIFICATION Model No Klimatronic Progress 7 0 plus Klimatronic Progress 9 0 plus Klimatronic Progress 12 0 plus 230V 50Hz AC 230V 50Hz AC 230V 50Hz AC Power consumption EN14511 780 W 980 W 1340 W Cooling capacity 2050 W 2600 W 3500 W 1 Do not use the unit on a socket under repairs or not installed properly 2 Do not use the unit follow these precautions A Near to source of fire B An area where oil is likely to splash C An area exposed to direct sunlight D An area where water is likely to splash E Near a bath a shower or a swimming pool Never insert your fingers into the air outlet Take special care to warn children of these dangers Keep the unit upward while transport and storage for the compressor locates properly Before cleaning the air conditioner always turn off and disconnect the power supply When moving the air conditioner alwa
6. he required temperature as well as the TIMER setting The m or m data of the manufacturer for the various PROGRESS units are average values related to a room height of 2 5 metres It must be considered that such data can be clearly underscored or exceeded under certain circumstances Circumstances which work against efficiency of the PROGRESS units include e g bad insulation of the building large window areas south facing attic apartment many additional heat sources such as e g number of persons EDP light kitchen units washing units etc You achieve the most effective and economical cooling comfort if you already cool the room to be cooled when the room temperature is not yet heated up Air conditioners operate more effectively if the temperature is to be maintained To drastically cool the air and inventory in a fully heated room requires much more time and energy EC Declaration of Conformity The unit complies with the essential health and safety requirements of the European Union The EC declaration of conformity is the basis for the CE marking of this unit ERP REGULATION This high quality single channel portable air conditioning unit is in accordance with the rules and regulations of the European Union in particular the new ERP Regulation 626 2011 to a local air conditioner REFRIGERANT CE N 842 2006 This air conditioner contains the refrigerant R410A The amount of refrigerant is less than 1kg
7. ll What should do unit at e g dusty areas after a longer period of non use by storing in unsuitable areas e g dusty areas Run the unit for 1 2 a day The smell will disappear after a while In the case of intensive odour development air the room Can operate the PROGRESS unit WITHOUT Yes but only in dehumidification mode the extract air hose To achieve temperature adjustments surplus coldness must be discharged At which intervals should the activated carbon To use the purpose of the filter fully it should be filter of the PROGRESS unit be replaced replaced every 6 months How can increase the efficiency of the PROGRESS unit Compressor does not activate PROGRESS unit deactivates How is the m or m data of the manufacturer calculated PROGRESS unit does not cool correctly External circumstances exist which may impact the efficiency of the PROGRESS unit Room insulation use of wall window adapter ratio of window space solar radiation operation of electrical units in the room EDP presence of several persons in the room You can increase the efficiency of the PROGRESS unit accordingly by adjusting such circumstances Depending on ambient temperatures and PROGRESS unit type it may take approx 10 minutes after starting the compressor until the cooling capacity is reached On reaching the set required temperature the PROGRESS unit switches off automatically Check manual setting of t
8. me setting buttons Time can be regulated at any time in 0 24 hours Press the Timer button to confirm your setting Timer OFF setting dehumidifying When the air conditioner ON press the Timer button and select a desired OFF time through the temperature and time setting buttons OFF time can be regulated at any time in 0 24 hours Press the Timer button to confirm your setting Drainage When you plan to leave this unit unused for a long time please remove the rubber blockage from the drainage hole at the bottom of unit and connect a drain hose to the lower fixing clip All the water in the water tank will drain outside If water pump is damaged continuous drainage can be used and under this condition the water pump is not activated The unit can also work well If water pump is damaged intermittent drainage can also be used Under this condition when the water full indicator lamp lights up please connect a drain hose to the lower fixing clip then all the water in the water tank will drain outside The unit can also work well Installation Explanations A removal air conditioner shall be installed in the flat and empty place all around Don t block the air outlet and the required distance around should be at least 30cm The unit should not be installed in dry cleaner Introduction to Exhaust Hose Installation A Temporary installation 1 Twist both ends of the exhaust hose into the sq
9. mperature Electric heating mode Room temperature is lower than the setting Reset the temperature temperature Cooling mode Not cool enough The doors or windows are not closed Make sure all the windows and doors are closed The sound comes from the flowing of the It is normal refrigerant inside the air conditioner several operation icons will blink at a room temperature higher or equal 18 C Auto mode and cooling mode will work together If the room temperature is equal to or above 18 C the unit can cool in the automatic mode At lower temperatures the device will protect the compressor by automatically switching into ventilation mode EO Code There is evidence that this error massage is Please turn off the unit and turn in on after 30 caused to a room temperature which is too high minutes If this fault is everlasting your It can also caused by a temporary fault at the PROGRESS unit should be checked by a rating between incoming and ouicoming professional temperature E2 Code Water tank full Please empty the water tank Can switch the PROGRESS unit on No immediately after unpacking it The PROGRESS unit must be placed upright for at least 24 hours after every transport Otherwise the compressor may be damaged and there is no capacity When switching on the PROGRESS unit sense Production related cause or incorrect storage of Odour development can arise on first use and a sme
10. uare fixing clip and the flat fixing clip 2 Insert the square fixing clip into openings at back of the air conditioner Hook the left side of the adapter into the opening at the rear cover Conduct the right side at the rear cover and press it down until the Adapter engages 3 Put the other end of the exhaust hose to the near windowsill 4 Maintenance Explanations Declaration 1 Before cleaning be sure to disconnect the unit from any electric supply outlet X 1 2 Do not use gasoline or other chemicals to clean the unit 3 Do not wash the unit directly 4 If the conditioner is damaged please contact the dealer or repair shop Air Filter If the air filter becomes clogged with dust dirt the air filter should be cleaned once every two weeks Dismounting Open the air inlet grille and take off air filter Cleaning Clean the air filter with neural detergent in lukewarm 40 C and dry it up in the shade Mounting Putting the air filter into the inlet grille replace the components as they were Clean the Air conditioner Surface First clean the surface with a neutral detergent and wet cloth and then wipe it with a dry cloth Troubleshooting Possible Causes ee Unit does not start when pressing POWER Water full indicator lamp blinks and water tank Dump the water out of the water tank button is full Room temperature is higher than the setting Reset the temperature te
11. ys turn off and disconnect the power supply and move it slowly To avoid the possibility of fire disaster the air conditioner shall not be covered All the air conditioner sockets must comply with the local electric safety requirements If necessary please check it for the requirements sO Oe Ns PURE ee This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Children should be supervised to ensure that they do not play with the appliance 10 If the supply cord is damaged it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard Notes If any parts damage please contact the dealer or a designated repair shop In case of any damage please turn off the air switch disconnect the power supply and contact the dealer or a designated repair shop In any case the power cord shall be firmly grounded To avoid the possibility of danger if power cord is damaged please turn off the air switch and disconnect the power supply It must be replaced from the dealer or a designated repair shop This air conditioner must be stored and transported upright otherwise you may cause irreparable compressor damage In case of doubt let the unit
Download Pdf Manuals
Related Search