GPS Vehicle tracker
Contents
1. command STATIC STATIC time STATIC 10 interval Time scope 1 60 seconds he device has3Dtransmission and the default time Ua are 6 minutes Command Successful Setting SET STATIC TIME OK Feedback Command Description Command Description 7 SERVER eee Parameter Sampe eee 1 0 1 SERVER 1 gm902 szdatasource com S di por 8841 2 SERVER 0 121 14 139 39 8080 ET the IP and port when move to a new server ae port 10 65535 P 1 is domain and 0 is IP Command Feedback Successful Setting SET SERVER OK 15 SEEWORLD 8 GMT Tex Parameter Sample command GMT location cual 4 GMT E 8 GMT time zone half GMT E 5 30 time zone Command The default time zone is Beijing time If time zone need Description revised please operate according to the above command Command Feedback Successful Setting SET GMT OK 9 VIBRATION command VIBRATION VIBRATION alarming 1 VIBRATION 2 3 Parameter level alarming 2 VIBRATION 2 wayl the sensitivity value of the vibration is from 1 to 5 1is the Command most sensitive and o is close Alarming ways 1 calling 2 Description texting 3 calling and texting Must set the center number and receiving number Command Feedback Successful reply SET VIBRATION OK 10 SPEEDING Text Parameter Sample command SPEEDING SPEEDING speed 1 SPEEDING 120 3 SEEWORLD The speed scope is form 60 220 if the speed is Command nothisc2. 35000 Said set the second SOS number SOS A 13500135000 Said setting the third SOS number SOS D NO 1 SOS D 1 said delete the first SOS NO 2 NO 3 number SOS Delete NO 4 NO 5 SOS D 3 said delete the third SOS SOS D Serial number NO 1 Serial SOS D 1 3 SEEWORLD NO 2 Said to delete the first and third SOS SerialNO 3 number SerialNO 4 SOS D 13800138000 SerialNO 5 Delete the SOS said the number 1 SOS number used for long by SOS alarm button receiving equipment send text messages and telephone 2 can set up five number as the center number 3 increase SOS please refer to increase SOS examples of several methods 4 delete SOS please refer to delete SOS examples of several methods Instruction application Instruction Success is increased SET SOS OK return Deleted successfully DEL SOS OK 4 APN command i APN apn usernam 1 APN intenet 123 123 APN differs according to the local telecom operators For example APN request password please refer to Sample1 and Sample2 for no password Command l Feedback Successful Setting SET APN OK 5 TIMER command TIMEER TIMER uploading interval TIMER 30 14 Command Description SEEWORLD Parameter setting Time scope 0 10 60 seconds 0 no data uploading 10 60 means time interval the default value is 10 seconds Command Feedback Successful Setting SET TIMER OK 6 STATIC Text Parameter Sample
3. SEEWORLD GPS Vehicle tracker GPS GSM SMS GPRS SEEWORLD 117 User Manual SEEWORLD SEEWORLD Please read this manual carefully before attempting installation and online activation Pictures are for indication and illustration purposes only 1 Accessories KF BS Ani ie Y SOS Alarm button standard Microphone standard SEEWORLD 2 Technical parameter 85MM 63MM 25MM 3 3 2 5 0 98 GPS Chip MT3326 GPS Sensitivit 159dBm GPS Precision GPS locating time Cold start 45S Warm start 35S Hot start 1S Working Voltage 10V 36V 3 7V 180mAH Stand by Time 2 hours The specific time long myopia GSM network conditions 40C to 85C SEEWORLD 20C_to_ 55C 5 95 non condensing 3 Out Look a SIM FHRA 1 0 40 IER EAE 4 Device status indicators Red LED GSM Signal state 4 1 When GSM signalis normal the red LED lamp shining continuously or not bright says thereis no GSM signal When GPRS works the red LED lights flashes 4 2 The green LED glistens when searching the GPS signals When GPS works the LED lights continuously 4 SEEWORLD 5 Installation 5 1 Preparation for the installation 5 1 1 Product Check Open the packing box and check the device s model and accessories If the model is wrong or the accessories not complete please contact the dealer 5 1 2 Choose SIM card Please insert a SIM card to the device Please tak
4. e dealer s advice as reference 5 1 3 SIM card installation Discharge the cover of the device and uncover the SIM card holder Then insert the SIM card and cover SIM card holder as follows TASR HOFS 5 1 4 Connect the device to the 9 24V power supply the red LED constant glow 5 1 5 Install the device in the hidden place of the car NOTE Put back the front cover and screw it up The SIM card must be with GPRS function and enough deposit If your SIM card need input PIN when power on please cancel it 5 2 Installation The GPS tracker must be installed under professional personnel 5 SEEWORLD Note 1 Please install the device in the hidden place as followings Under Front windshield In the front instrument panel Under back windshield 2 Avoid being placed with signal radiators like reverse sensor 3 The device has GSM antenna and GPS antenna inside Please ensure the receiving side of the device is face up and without metal cover Note The metal cover will lessen the receiving of GPS signals 6 Device wiring requirements 6 1 The device power supply is DC 9 24V The red line is positive pole while the black line is negative pole 6 2 The negative pole of power supply connects with ground or the metals Please do not connect with other ground lines 6 3 When finishing the power supply wire connection please make the plug of power supply to the device 6 4 Concealed installation po
5. is no connect indicating that the terminal balance shortage or 10 SEEWORLD already when stop machine Terminal SIM card already owe please therefore SIM card to top up If there is on and heard du du du When the sound Terminal SIM card installed correctly and still has remaining sum please consult this card s operators have opened GPRS service You can also use mobile phones in the browser input you commonly used web site to see whether can open a web page If can t open Show that your SIM card have not open GPRS service please contact the operator opening for you If reminding the device is power off please turn back the device and proceed as followings 1 Check if the red LED is in constant glow If the LED is dark please check the power connecting If fuse is broken please return the device to the seller 2 If power light long light blue GSM light no shining please check the SIM card is correct installation if the installation of no problem please change another a SIM card to use 12 2 Please check the offline area in order to judge if the network problem of operators 12 3 When the device cannot receive the GSM signal please check the SIM card installation If the GSM signals cannot reach your location such as the basement please drive to the open sky 12 4 The red LED is not glow when power on Check the fuse of the power line If the fuse is fused please change the fuse with the seller A
6. nd check out terminal internal fault rear can again power on work 13 User Settings 13 1 S117 Set class instruction 1 SEEWORLD 1 CENTER command 1 Center number can control the oil and power and resume factory settings 2 Center number can receive the call and text of vibration alarm and over speeding alarm Command 3 SIM must display the income call number to control oil Description and power 4 Only one number can be center number 5 Change center number must resend the command 6 Add new center number by CETNER A and delete by CENTER D polmane Successful Setting SET CENTER TEL OK Feedback 2 RELAY command RELAYParam RELAY 1 RELAY 1 cutoff oil and power pi YParam RELAY O RELAY 0 recover oil and power 12 SEEWORLD 1 RELAY control the start and closeness of the relay 2 Only the center number can operate 3 the device only cut off the oil circuit on the condition of the driving speed below 20KM H or in static state Command Description 4 When send the command the device will reply please waiting When the vehicle speed is over 20KM H the device will cut off the oil or the power when the speed below 20KM H Command l Feedback Successful Setting Relayed enable OK 3 SOS command SOS A 13500135000 13800138000 13 850000000 Set 3 numbers one time SOS A 13500135000 SOS increase SOS A NO 1 Said set the first SOS number NO 2 NO 3 NO4 No s SOS A 135001
7. ope the alarm is off Description Alarming 1 calling 2 texting 3 calling and texting Must set the center number and receiving number Command Successful Setting SET SPEEDING OK Feedback 11 LANG command LANG LANG 1 LANG 1 Parameter LANG O 1 CHINESE 0 ENGLISH When check the location it will reply the Chinese location in Chinese language setting while reply the URL link when in English language setting Command Feedback Successful Setting SET LANG OK 12 RESET command RESET RESET RESET RESET Command Reset the device Command Description Command Feedback Successful Setting RESET OK 17 SEEWORLD 13 FACTORY Text FACTORY FACTORY FACTORY Restore the factory setting ee Only center number can initial this function escription f ap Factory setting will recover to the original setting Command Feedback Successful Setting FACTORY OK SEEWORLD Technology Co Ltd Tel 86 20 36604699 Fax 86 20 36636771 Email sales01 seeworld hk Skype seeworldgps Address The 21Floor No 565 Tianhe Road North Tianhe District Guangzhou China 510070 Web www seeworld net cn 18
8. pply has been cut off 9 SEEWORLD 10 Monitor or position reply When open monitoring function the administrator or authorization number dialed telephone terminal after 5 seconds in the monitoring state when didn t open monitoring function the administrator or authorization number dialed telephone terminal after 5 seconds in positioning state recovery position links when not positioning reply a short information says GPS not localization 11 The platform website position querying If you have login information for the platform you can directly landing platform service website Otherwise please contact your dealer for you to open the online landing account provide login name and password On your computer browser address bar input service platform website fill in the acquisition of the login account and password then click the landing to service platform The function of the service platform operation please you to the dealer for service platform operation use guide 12 Trouble shooting 12 1 The device is not online or offline on the web platform 12 1 1 First please check the three LED working state If possible You can call the device s number to check If there is no connect indicating that the terminal temporarily not connected or not in the service area Terminal area may not cover GSM signal or in the basement of the weak signal and the place please drive to have signal place to use if there
9. wer connecting line selection of original factory provides the main power cord such as product fitting chart infrared end series have FUSE box 2 a FUSE can have a short circuit over current protection SEEWORLD Installation steps the following operation are terminal no electric power otherwise will appear dangerous Terminal fault oil line yellow line Terminal power line white line joint joint relay 86 feet 85 feet after 12 7 relay 86 feet 85 feet after 12 v dc v DC battery anode 87 a feet and battery anode 87 a foot and 30 SEEWORLD Emergency trigger alarm circuit Terminal power supply circuit red line contact send alarm button red line connect the 12 v dc positive black line contact car battery anode black line connect battery negative car battery negative 6 5 equipment start 6 5 1 Join equipment in to the car then insert SIM card to the equipment until the red indicator light is lit up Go to the outdoor where have satellite signal place each time when you use it 6 5 2 At first use please initialization to default Settings state 6 5 3 Between 10 and 40 seconds the equipment will search to GSM and GPS signal and began to normal work in normal condition equipment LED light long bright red light flash to indicate the GMS didn t signal 8 SEEWORLD or didn t read card green light flash to indicate the GPS no positioning if the light continuously says
10. working properly five minutes after the light will put out if want to see the light condition you should call the number of equipment the light will open again 6 5 4 When the equipment GSM working normaly you can set up any instruction in the manual 7 0 The Device Working 7 1Power on The device will be power on when connecting to the current Then the red power light indicators will light continuously Green GPS light shining saids GPS already positioning red GSM lamp shining saids SIM card work normal The terminal every time the default 20 s service platform to upload a current position information when vehicle long time in static state terminal will automatically enter the energy saving mode and start static drift inhibition mechanism thus effectively control GPS static drift data problem make the terminal work more save electricity more intelligent more accurate path 7 2 Power off Pull off the power plug then power off the device 7 3 ACC detection Testing wether the automobile power is open Can be in platform shows that ACC state 8 SOS alarm Hold the SOS switch button for 2 seconds and began to platform alarm cycle call administrator and authorization number until the phone get through It will automatic hang up after 3 minutes 9 Power off alarm When the equipment of power supply is cut off then to the administrator or authorization number send cut off warning information please note the power su
Download Pdf Manuals
Related Search