Black Fascia & Auto Slide
Contents
1. running 1 Depress Timer to enter into this function default setting is 5 00 min you can depress Speed to increase and Lamp to decrease and adjust the duration from 1 00 to 60 00 min 2 Depress Timer again to confirm and finalize auto off duration setting Your range hood can remember the last setting so if no new settings next time the function will be on according to the last setting Lamp Turn on off light decrease digit in timer setting Speed select speed to suit cooking conditions increase digit in timer setting Low light frying boiling Medium frying wok cooking heavy boiling High grilling intensive frying and wok cooking Power Turn on off the range hood For BR603 903AX turn on the range hood drawer will slide out automatically turn off the range hood drawer will slide in automatically Maintenance and cleaning Caution e Before maintenance or cleaning is carried out the range hood should be disconnected from the main power supply Ensure that the range hood is switched off at the wall socket and the plug removed e External surfaces are susceptible to scratches and abrasions so please follow the cleaning instructions to ensure the best possible result is achieved without damage GENERAL Cleaning and maintenance should be carried out with the appliance cold especially when cleaning Avoid leaving alkaline or acid substances lemon juice vinegar etc on the su2. the contents of this packaging slightly different to that shown Date of Purchase NOTES FOR WARRANTY SERVICE CALL 1300 373 199 AUSTRALIA OR 0508 123108 NEW ZEALAND TO CONNECT YOU TO THE NEAREST AUTHORISED SERVICE CENTRE Serial Number Gerard Sourcing amp Manufacturing GSM Sales Pty Ltd The GSM Sales Pty Ltd Group of Companies has a policy of continual improvement throughout the product range As such the unt contained within may differ slightly from the unit illustrated on the pack MADE IN CHINA for the GSM Sales Pty Ltd Group of Companies Bellini is a registered trademark of GSM Sales Pty Ltd N1028
3. Black Fascia amp Auto Slide Out Canopy Range Hood Installation and User manual Content Safety instructions 1 Product description 3 Operation mode 4 lnstallation 2 2 4 24 lt 22s26 2 ei ooo o ceo es es 5 Start using the range hood 9 Maintenance and cleaning 10 Warranty 11 For warranty service call 1300 373 199 Australia BR603AX or 0508 123108 New Zealand to connect you to BR903AX the nearest authorised service centre BR603TBX BR903TBX safety instructions This manual explains the proper installation and use of your range hood please read it carefully before using even if you are familiar with the product The manual should be kept in a safe place for future reference Never to do This appliance is not intended for use by persons including children with reduced physical sensory and mental capabilities or lack of experience and knowledge unless they have been given This range hood is not recommended for barbecues Always to do Packaging materials eg polystyrene and plastic items must be kept out of reach of babies or young children at all times due to risk of suffocation supervision or instruction concerning use of the Young children should be supervised to appliance by a person
4. NTY Fill out the following details and file with your purchase invoice RETAIN amp FILE WITH YOUR RECEIPT Your Purchase Receipt Invoice is proof of date of purchase If you are unable to establish the date of purchase or if the fault is not covered by this warranty or if the product is found to be in working order you will be required to bear all service call charges GSM Sales Pty Ltd reserves the right to discontinue items modify designs and change specifications without incurring obligation Whilst every effort is made to ensure that descriptions specifications and other information in this publication is correct no warranty is given in respect thereof and the company shall not be liable for any errors therein You may not make claim under this warranty unless the defect claimed is due to faulty or defective parts or workmanship GSM Sales is not liable in the following situations which are not exhaustive 1 accident 2 misuse or abuse including failure to maintain 3 normal wear and tear 4 power surges electrical storm damage or incorrect power supply 5 incorrect or incomplete installation 6 incorrect operation and use 7 any modification to appliance without consent 8 the appliance is serviced by anyone other than a GSM Sales authorised service agent 12 Purchased from Co Name NOTE Consistent with our continuing product Address development policy improvements may have been made which render
5. Place Upper Decorative Chimney inside the Lower Decorative Chimney Connect the Lower Chimney retaining bracket to the Lower Decorative Chimney with 2 x ST4x8mm screws do not fully tighten allowing for sufficient clearance to telescopically adjust the Upper Decorative Chimney to the desired position when installation is completed p LETS al Es a Ea ua Upper decorative chimney Inner ower Chimney retaining bracket Lower decorative chimney Outer 7 Install active Charcoal Filters Air Recirculation Mode only Note For Air Extraction Mode option skip Step 7 and proceed with Step 8 Remove grease mesh filters and install active Charcoal Filter Optional Accessory onto the fan motor housing As shown in drawing below We strongly recommend the installation of Charcoal Filter to absorb cooking odors Close 8 Secure the hood mount bracket onto wall with 3 x ST4x40mm screws making sure screws are securely tightened 9 Position the hood assembly onto the Hood Mount Bracket ensuring that bracket hooks are securely interlocking into the mounting slots of the hood assembly 10 Secure the base of the hood with 2 x ST4x30mm anti tilt screws to ensure unit is installed level mounting holes for the screws are accessible via the fan motor chamber 11 Fasten the Lower Chimney retaining bracket to the wall with 2 x ST4x40mm screws 12 Plug into the main power supply 13 Position the Upper Chimney retaining brac
6. e Filters should be washed separately to crockery and kitchen utensils it is advisable not to use rinse aid Replace Lamp Using a small flat blade screwdriver remove the inner stainless steel ring to obtain access to the halogen globe When removing the inner ring do so carefully so not damage the range hood as the glass lens could easily fall out of the inner ring Remove halogen globe whilst cool and replace carefully with a new globe The range hood takes 2 x 20W 12 volt halogen globes Important When handling globes hold with a cloth or gloves to ensure perspiration does not come in contact with the globe as this can reduce the life of the globe 11 The benefits conferred by this warranty are in addition to all implied warranties other rights and remedies in respect of the product which the consumer has under the Trade Practices Act and similar State and Territory Laws The original purchaser of this Bellini product is provided with the following warranty subject to the following warranty conditions This product is covered by a 2 Year In Home Warranty from the date of purchase The warranty covers rectification free of charge of any fault arising from defective materials or components or faulty workmanship The product will be repaired or replaced at the option of GSM Sales Pty Ltd WARRANTY CONDITIONS 1 This warranty is only valid for appliances installed and used according to the manufacturer s ins
7. e noise levels of the range hood Ensure the exhaust ducting selected for installation complies with relevant standards and is fire retardant 1 Using a spirit level mark a vertical line on the wall Central to the cook top installed below to indicate the centre location of the hood and a horizontal line where the hood base will be positioned NOTE The distance from the horizontal line to an electrical cooktop underneath must be minimum of 600mm amp 650mm to the gas cook top and a maximum height of 800mm refer to table below Vertical centre line Horizontal line Hood base Minimum Electric 600mm Gas 650mm Maximum 800mm Top of hob _ Ya AA EEATT ee E EOS En e S EUS aa aaa as If the instructions of the hob specify a greater distance than the minimum above then that shall be the minimum height for installation 2 Use the installation guide template to determine where screw mount holes should be located Make sure vertical and horizontal lines on the installation guide template superimpose with the lines just drawn on the wall 3 According to the positions just marked as per installation guide template drill holes in the wall and fit dry wall anchor plugs into holes 4 Fit the outlet on the top of range hood body and retain with 4pcs ST4x8mm screws 5 Fit the flexible exhaust duct onto outlet Air Extraction mode only Note For the Air Circulation Mode option skip step 5 and proceed with step 6 6
8. ket at the extended height of the decorative chimney and secure to the wall with 2 x ST4x40mm screws Total maximum extension height of BR603TBX and BR903TBX is 780mm each chimney height is 400mm Total maximum extension height of BR603AX and BR903AX is 980mm each chimney height is 500mm 14 Extend the Upper decorative chimney to the desired height and secure it with 2 x ST4 x 8mm screws to the chimney retaining bracket Sog HY o LH it i a WHE H i L Ne 15 Remove all blue protective film on chimney and cooker hood the installation is now finished Start using your range hood Timer Clock time setting auto off Clock time setting 1 Depress Timer for 2 to 5 second hour digit segment will flash depress Speed to increase and Lamp to decrease hour digit until current clock hour time appears 2 Depress Timer again minute digit segment will flash depress Speed to increase and Lamp to decrease minute digit until current clock minute time appears 3 Depress Timer again to confirm and finalize clock time setting Auto off duration setting At the end of cooking if the timer is switched on the range hood will continue to run for an additional duration as you set up to remove any odors that remain at the completion of cooking After the set up duration the range hood will turn itself OFF This function is available only when range hood motor is
9. ould not be connected to ducting safety instructions which ventilates rooms with fire places Always to do Attention should be given to ensure that any applicable regulations concerning discharge of exhaust air are fulfilled This appliance should be installed and maintained by a suitably qualified and competent person in accordance with the relevant safety regulations Before connecting the appliance to the mains supply ensure that the voltage and frequency details on the rating plate are consistent with the source of supply Product description Accessories bag ZA Description User Manual Outlet diameter 150mm Dry wall anchors plugs Screw ST4x8mm Screw ST4x40mm P gt Screw ST4x30mm Hm Component list Technical data 1 Upper chimney retaining bracket 2 Upper decorative chimney Inner 3 Lower chimney retaining bracket 4 Flexible exhaust duct Power supply 220 240v 50Hz 5 Lower decorative chimney outer Motor 190W 6 Hood mount bracket Lights 2x20W Halogen lamp 7 Outlet diameter 150mm Length of power cord 2m 8 Main body Air outlet diameter 150mm 9 Grease mesh filter for BR603 903TBX 2 pcs for BR603TBX 3 pcs for BR903TBX 10 Grease mesh filter for BR603 903AX Operation Mode Your range hood can be operated in two modes choose the mode suitable for your kitchen before installation Air Extraction To outside For air extraction mode a duc
10. responsible for their safety ensure that they do not play with the Never carry out flamable cooking under the appliance appliance Ensure the range hood is switched off before The exhaust from the range hood must not be carrying out maintenance to avoid any discharged into any heating flue which may carry possibility of electric shock combustion products from other sources Grease filters must be removed every four weeks maximum for cleaning to reduce the risk of fire There must be adequate ventilation of the room when the range hood is used at the same time as appliances burning gas or other fuels Always cover lit gas burners with pots or pans J when range hood is in use Always switch off gas burners before you Do not leave lit gas burners exposed due to the risk remove pots or pans of fire lf the supply cord is damaged the cord must be replaced by the manufacturer its service agent or similarly qualified persons in order to avoid a hazard Plug must be accessible after installation Never to do This range hood cannot be installed for outdoor use It is prohibited to fit the range hood over a solid fuel stove This appliance must not be connected to a chimney or vent flue which is in use This appliance is not to be vented into the roof cavity must exit into open air Exhaust air must not be discharged into a wall cavity unless the cavity is designed for the purpose This appliance sh
11. rfaces STAINLESS STEEL The stainless steel must be cleaned regularly e g weekly to ensure long life expectancy Dry with a clean soft cloth A specialized stainless steel cleaning fluid may be used NOTE Ensure that wiping is done along with the grain of the stainless steel to prevent any unsightly crisscross scratching patterns from appearing CONTROL PANEL SURFACE The inlay control panel can be cleaned using warm soapy water Ensure the cloth is clean and well wrung before cleaning Use a dry soft cloth to remove any excess moisture left after cleaning Important Avoid using harsh cleaning chemicals strong household detergents or products containing abrasives as this will affect the appliance appearance and potentially remove any printing of artwork on the control panel and will void manufactures warrantee GREASE MESH FILTERS The mesh filters can be cleaned either by hand or in the dishwasher After cleaning ensure that the filters are completely dry before refitting By hand Soak in warm water and a neutral washing up liquid For stubborn grease stains use a soft nylon brush or sponge to help remove these stains Leave to dry naturally out of direct sun light In a dishwasher Ensure that placement of the filters is made so as to not impede the function of the spray arm Washing the filters in a dishwasher may cause discoloration of the aluminum inner mesh over time although it will not affect their performanc
12. ting kit is required the air is drawn in and cleaned by the grease filters and via the ducting must be directed to the outside atmosphere Ducting must be vented to outside atmosphere For air recirculation mode charcoal filter Optional Accessory must be installed to eliminate cooking smells The air is drawn in and cleaned first by the grease filters and then charcoal filter The cleaned air is then re circulated back into kitchen through vents in the Upper Decorative Chimney Installation Dimensions BR603TBX BR903TBX BR603AX BR903AX 500mm 980mm Width of BR603TBX and BR603AX is 600mm width of BR903TBX and BR903AX is 900mm Installation Warning Check that the installation complies with the standards of local building gas and electrical authorities Before connecting to the mains supply ensure the mains voltage corresponds to the voltage on the appliance rating plate inside the range hood When installing the range hood make sure you adhere to the minimum and maximum distances from the range hood base to the cooktop hob surface Hints for exhaust duct installation The following rules must be strictly followed to obtain optimal air extraction Keep exhaust duct short and straight Do not reduce the size or restrict exhaust duct When using flexible duct always install the duct pulled taut to minimize pressure loss Failure to observe these basic instructions will reduce the performance and increas
13. tructions 2 This warranty does not apply to damage caused if your appliance has been dismantled repaired or serviced by any person other than someone authorised by the Company 3 If you live outside the service area of the Company or one of its service agents this warranty does not cover the cost of transport of the appliance for service nor the service agent s traveling costs to and from your home 4 If you are required to transport the appliance to the Company or its service agent you must ensure it is securely packed and insured The Company does not accept any responsibility for loss or damage of the appliance prior to it being received by the Company or its service agent 5 This warranty does not cover loss damage or expense to this appliance caused directly or indirectly by power surges electrical storm damage or connected to incorrect power supply 6 The Company and any company related to the Company will not be liable for any special incidental or consequential damages or for loss damage or expense or for personal injury or loss or destruction of property arising directly or indirectly from the use or inability to use this appliance or any of its parts 7 Warranty will only be given where proof of purchase is provided e g original invoice 8 Not designed or warranted for industrial or commercial use Commercial use applies to shops offices schools factories amp workshops etc DO NOT SEND IN THIS WARRA
Download Pdf Manuals
Related Search