User`s manual FLIR VS70
Contents
1. itor display 311559827 r AD 10339 10339 en US 19 5 Operation 5 6 2 Wireless transmitter direct version Attach the probe to the wireless transmitter Connect the wireless transmitter to the probe connector on the monitor us ing the supplied patch cable Onthe wireless transmitter press and hold down the button for 5 sec onds to switch on both the transmitter and the monitor The camera video is displayed on the monitor display In the setup menu under NPUT SOURCE select DIRECT Refer to section 5 2 Setup menu page 14 5 7 Managing stored pictures and videos 5 7 1 Viewing pictures and videos on the monitor display 1 2 Press the 4 button to access the pictures and videos in the memory Thumbnails of the pictures and videos are displayed The gt icon is dis played on video thumbnails Use the 4 and Cv buttons to navigate through the picture video thumb nails The selected picture video is framed 311559827 r AD 10339 10339 en US 20 5 Operation o 4 Toopen the selected picture video file press the button The file number e g IMG00005 and the icon for pictures or the icon for videos are displayed 5 To start playback of an open video file press the button The icon is displayed 6 To pause the playback of a video press the button The 11 icon is displayed a 7 To exit an open picture video press the button 8 To exit the picture video file me2. marks or trademarks of FLIR Systems and or its subsidiaries All other trade marks trade names or company names referenced herein are used for identification only and are the property of their respective owners 1 2 Quality assurance The Quality Management System under which these products are developed and manufactured has been certified in accordance with the ISO 9001 standard FLIR Systems is committed to a policy of continuous development therefore we reserve the right to make changes and improvements on any of the products without prior notice 1 3 Documentation updates Our manuals are updated several times per year and we also issue product crit ical notifications of changes on a regular basis To access the latest manuals and notifications go to the Download tab at http support flir com It only takes a few minutes to register online In the download area you will also find the latest releases of manuals for our other products as well as manuals for our historical and obsolete products 311559827 r AD 10339 10339 en US 1 Disclaimers 1 4 Disposal of electronic waste As with most electronic products this equipment must be disposed of in an envi ronmentally friendly way and in accordance with existing regulations for elec tronic waste Please contact your FLIR Systems representative for more details 1 5 FCC Compliance This device complies with part 15 of the FCC Rules Operation is subject to the
3. FLIR User s manual FLIR VS70 High definition videoscope inspection camera FLIR User s manual FLIR VS70 311559827 r AD 10339 10339 en US Table of contents 1 Disclalmers ce as 1 1 1 COM ce ses ATA aer doit Ede Dat Le Duns 1 1 2 Quality assurance viii aga Ea AE ASSA Ah eee 1 1 3 Documentation updates sss 1 1 4 Disposal of electronic waste esses 2 1 5 FCC Compliance sssssssss nn 2 1 6 Industry Canada compliance cece eee eee 3 2 Safety information u2suunnnnnnnnnnnnnnnnnnnnnunnnnunnnnnnnnnnn 4 3 Introduction 1 iis nee ann 6 4 Description z2aannonannnunannunannnnnnnnnnunnnnnnnnnnnnannnnnnn 7 4 1 Moni re eripe e keen 7 4 2 Articulating probe 20 0 cece a ee eens 10 4 3 Wireless transmitter uueseeeeeeeeeeeeeeeeeee eee ee 11 4 4 Probe accessories csse 11 4 5 PrODO icti ee dd a ease ll 12 5 Operation uuzuussunnnnnnnnnnnnnunnnnunnnnnnnnnnnnnnnnnunnnnnnnnnn 13 5 1 Basic operation see 13 5 2 Setup menu uites nannte 14 5 3 Factory Default Profiles menu u ssssss00 15 5 4 Installing probe aCCeSSOrieS 66 cece cece eee eee 15 5 5 Articulating probes atrisina cece eee ai E 16 5 6 Wireless transmitter nenion a ai eee ees 18 5 7 Managing stored pictures an
4. following two conditions 1 This device may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential instal lation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be deter mined by turning the equipment off and on the user is encouraged to try to cor rect the interference by one or more of the following measures e Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help 311559827 r AD 10339 10339 en US 2 1 Disclaimers A CAUTION Exposure to Radio Frequency Radiation To comply with FCC IC RF exposure compliance requirements a separation dist
5. hierarchy and to exit the setup menu Factory Default Profiles menu The FLIR VS70 has two factory default profiles Default1 and Default2 and one user profile for brightness contrast hue and saturation camera settings To ac cess the Factory Default menu follow this procedure ds 2 3 5 4 Navigate to the the VIDEO FORMAT screen in the setup menu as explained in Section 5 2 Press OK to open the TV OUTPUT NTSC PAL selection screen Press either of the camera buttons top left or top right button to access the Factory Setup screen The user profile settings will be shown these can be adjusted and saved by the user Scroll down to Default1 or Default2 and press OK to use one of the factory default profiles Installing probe accessories Three accessories mirror anti snag tip and magnet are supplied with each probe 311559827 r AD 10339 10339 en US 15 5 Operation Figure 5 1 Installing probe accessories 1 Unscrew the probe ring 2 Screw on the accessory 5 5 Articulating probe The articulating probe with an adjustable tip angle is used for improved viewing angles and optimum inspection when the probe is inserted into the area to be ex amined The articulating probe is available in a direct wired or wireless version Turn the articulation knobs to adjust the camera tip The tension of an articulation knob is adjusted by turning the corresponding tension knob Refer to Figure 4 4 Articulating pr
6. probes press the button to toggle between the side view and the front view camera lens 7 Use the and buttons to zoom in and out 5 1 1 Controlling the camera LED light intensity Note The camera LEDs become warm when set to maximum intensity 1 In wireless mode use the light intensity buttons on the articulating probe see Figure 4 4 Articulating probe page 10 or wireless transmitter see Fig ure 4 5 Wireless transmitter page 11 to increase decrease the light intensity 2 Indirect mode use the and buttons to increase decrease the light intensity 5 1 2 Taking a picture x 1 Press the button to take a picture and store it in the memory The icon is briefly displayed 5 1 3 Recording a video 1 Audio can be recorded on the video via the microphone located on the bot tom of the monitor For audio recording remove the bottom access cover T559827 r AD 10339 10339 en US 13 5 Operation 2 Press and hold down the button for 3 seconds long press to start the REC video recording The D g icons are displayed 3 While recording you can take a picture by pressing the press 4 Press and hold down the video recording 5 2 Setup menu button short button for 3 seconds long press to stop the Monitor settings are adjusted in the setup menu DELETE ALL Delete all stored pictures and videos VIDEO OUTPUT For two camera probes select the front view or the side
7. 0 pixels Interface Mini USB 1 1 and AV out Recording medium SD card SD memory 4 GB standard 32 GB maximum Compression format MPEG4 Still image format JPEG 640 x 480 Video recording format AVI 640 x 480 Video output format NTSC and PAL Frame rate 30 fps Receiver frequency 2 4 GHz Receiver sensitivity 87 dBm SNR 42 dB Fmod 15 kHz Video system NTSC PAL Data Video audio Audio type Stereo Tripod mount On rear accepts standard tripod screw Battery 3 7 V rechargeable lithium polymer Power adaptor 100 240 V input 5 V DC output Operating temperature 10 to 60 C 14 to 140 F Storage temperature 40 to 80 C 40 to 176 F Operating humidity maximum 80 T559827 r AD 10339 10339 en US 24 7 Technical specifications Dimensions W x D x H 241 mm x 178 mm x 70 mm 9 5 x 7 x 2 75 Weight 1 57 kg 3 46 Ib including batteries 7 2 Transmitter Frequency 2 4 GHz Data Video audio Video system NTSC PAL Battery 3 7 V rechargeable lithium polymer Power adaptor 100 240 V input 9 V DC output Unobstructed effective range 10 m 32 5 Operating temperature 10 to 60 C 14 to 140 F Storage temperature 40 to 80 C 40 to 176 F Dimensions W x D x H 190 mm x 70 mm x 63 5 mm 7 5 x 2 75 x 2 5 Weight appr
8. UDED FROM THIS AGREEMENT THIS WARRANTY EXPRESSLY EXCLUDES ROUTINE PRODUCT MAINTENANCE SOFTWARE UPDATES AND REPLACEMENT OF FUSES OR DISPOSABLE BATTERIES FLIR FURTHER EXPRESSLY DISCLAIMS ANY WARRANTY COVERAGE WHERE THE ALLEGED NONCONFORMITY IS DUE TO NORMAL WEAR AND TEAR OTHER ALTERATION MODIFICATION REPAIR ATTEMPTED REPAIR IMPROPER USE IMPROPER MAINTENANCE NEGLECT ABUSE IMPROPER STOR AGE FAILURE TO FOLLOW ANY PRODUCT INSTRUC TIONS DAMAGE WHETHER CAUSED BY ACCIDENT OR OTHERWISE OR ANY OTHER IMPROPER CARE OR HANDING OF THE PRODUCTS CAUSED BY ANY ONE OTHER THAN FLIR OR FLIR S EXPRESSLY AU THORIZED DESIGNEE THIS DOCUMENT CONTAINS THE ENTIRE WAR RANTY AGREEMENT BETWEEN PURCHASER AND FLIR AND SUPERSEDES ALL PRIOR WARRANTY NE GOTIATIONS AGREEMENTS PROMISES AND UNDERSTANDINGS BETWEEN PURCHASER AND FLIR THIS WARRANTY MAY NOT BE ALTERED WITH OUT THE EXPRESS WRITTEN CONSENT OF FLIR 6 WARRANTY RETURN REPAIR AND REPLACE MENT To be eligible for warranty repair or replacement Purchaser must notify FLIR within thirty 30 days of dis covering of any apparent defect in materials or workman ship Before Purchaser may return a Product for warranty service or repair Purchaser must first obtain a returned material authorization RMA number from FLIR To obtain the RMA number Owner must provide an original proof of purchase For additional information to notify FLIR of an apparent defect in materials or workmanship or
9. a with 1 m 3 3 SR probe VGA via SF VSC5 8 2RM 5 8 mm 0 23 camera with 2 m 6 6 SR probe VGA via SF VSC5 8 1R 5 8 mm 0 23 camera with 1 m 3 3 SR probe VGA via LF VSC5 8 2R 5 8 mm 0 23 camera with 2 m 6 6 SR probe VGA via LF VSC5 8 20 5 8 mm 0 23 camera with 20 m 66 FG probe VGA via LF VSC5 8 30 5 8 mm 0 23 camera with 30 m 98 FG probe VGA via LF VSC8 0 1R 8 mm 0 31 camera with 1 m 3 3 SR probe VGA via LF VSC8 0 2R 8 mm 0 31 camera with 2 m 6 6 SR probe VGA via LF VSC6 5 12S 6 5 mm 0 26 camera with 0 30 m 12 SS rigid probe VGA via SF VSC6 5 17S 6 5 mm 0 26 camera with 0 43 m 17 SS rigid probe VGA via SF VSS 20 Plumbing spool 20 m 66 VSS 30 Plumbing spool 30 m 98 VSC25 25 mm 0 98 camera with FG detachable probe VGA via LF VSC28 28 mm 1 1 camera with FG detachable probe VGA via LF 311559827 r AD 10339 10339 en US 27 8 Technical support Website http www flir com test Technical support T amp MSupport flir com Repairs Repair flir com Phone number 1 855 499 3662 toll free T559827 r AD 10339 10339 en US 28 9 FLIR Test and Measurement Limited 2 Year Warranty A qualifying FLIR Test and Measurement product the Product purchased either directly from FLIR Commer cial Systems Inc and affiliates FLIR or from an author ized FLIR distri
10. ance of at least 20 cm must be maintained between the antenna of this de vice and all persons This device must not be co located or operating in con junction with any other antenna or transmitter AN WARNING Changes or modifications not expressiy approved by the party responsible for compliance could void the user s authority to operate the equipment 1 6 Industry Canada compliance This device complies with Industry Canada licence exempt RSS standard s Op eration is subject to the following two conditions 1 this device may not cause in terference and 2 this devicemust accept any interference including interference that may cause undesired operation of thedevice A CAUTION Exposure to Radio Frequency Radiation To comply with RSS 102 RF exposure compliance requirements for mobile configurations a separation distance of at least 20 cm must be maintained be tween the antenna of this device and all persons This device must not be co located or operating in conjunction with any other antenna or transmitter 311559827 r AD 10339 10339 en US 3 2 Safety information Note Before operating the device you must read understand and follow all in structions dangers warnings cautions and notes Note FLIR Systems reserves the right to discontinue models parts or accessories and other items or to change specifications at any time without prior notice Note Remove the batter
11. b left right Articulating camera Tension knob up down Light intensity buttons Power button AC adaptor and extension cable sockets VDADARON A 311559827 r AD 10339 10339 en US 4 Description 4 3 Wireless transmitter Figure 4 5 Wireless transmitter Probe connector Light intensity buttons Power button Pons 4 4 Probe accessories 1 2 3 Figure 4 6 Probe accessories 1 Anti snag tip 2 Magnet 3 45 mirror AC adaptor and extension cable sockets T559827 r AD 10339 10339 en US 4 Description 4 5 Probe Figure 4 7 Probe 1 Camera 2 Shaft 3 Monitor connector 311559827 r AD 10339 10339 en US 5 Operation 5 1 Basic operation Insert an SD card into the SD card slot located on the bottom of the monitor 2 Connect the probe to the monitor or turn on the wireless adapter if applicable 3 Press and hold down the button for 5 seconds to switch on the monitor 4 If the battery indicator ME shows that the battery voltage is low or if the monitor does not power on recharge the battery See section 6 2 Battery re charging page 23 5 Maneuver the probe into position to view the area to be examined The probe can be bent into the shape of the area to be examined The optimum focus distance is probe dependent 6 For two camera
12. butor or reseller that Purchaser registers on line with FLIR is eligible for coverage under FLIR s Lim ited Warranty subject to the terms and conditions in this document This warranty only applies to purchases of Qualifying Products see below purchased and manufac tured after April 1 2013 PLEASE READ THIS DOCUMENT CAREFULLY IT CON TAINS IMPORTANT INFORMATION ABOUT THE PROD UCTS THAT QUALIFY FOR COVERAGE UNDER THE LIMITED WARRANTY PURCHASER S OBLIGATIONS HOW TO ACTIVATE THE WARRANTY WARRANTY COVERAGE AND OTHER IMPORTANT TERMS CON DITIONS EXCLUSIONS AND DISCLAIMERS 1 PRODUCT REGISTRATION To qualify for FLIR s Lim ited Warranty Purchaser must fully register the Product di rectly with FLIR on line at http www flir com within Sixty 60 DAYS of the date the Product was purchased by the first retail customer the Purchase Date Qualifying PRODUCTS THAT ARE NOT REGISTERED ON LINE WITHIN SIXTY 60 DAYS OF THE PURCHASE DATE WILL HAVE A LIMITED ONE YEAR WARRANTY FROM DATE OF PURCHASE 2 QUALIFYING PRODUCTS Upon registration Test and Measurement products that qualify for coverage under FLIR s Limited Warranty are VS70 Videoscope VSAxx Articulation Camera VSCxx Camera VSSxx Probe Spool VST handset MRO2 Pin Extension Probe and TAxx not including accessories which may have their own warranty 3 WARRANTY PERIODS The applicable Limited War ranty Period measured from the Purchase data are Products Limite
13. d Warranty Period VS70 VSAxx VSCxx TWO 2 Years VSSxx VST MRO2 TAxx Any Product that is repaired or replaced under warranty is covered under this Limited Warranty for one hundred eighty days 180 days from the date of return shipment by FLIR or for the remaining duration of the applicable Warranty Period whichever is longer 4 LIMITED WARRANTY In accordance with the terms and conditions of this Limited Warranty and except as ex cluded or disclaimed in this document FLIR warrants from the Purchase Date that all fully registered Products will conform to FLIR s published product specifications and be free from defects in materials and workmanship during the applicable Warranty Period PURCHASER S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY AT FLIR S SOLE DISCRETION IS THE RE PAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS IN A MANNER AND BY A SERVICE CENTER AUTHOR IZED BY FLIR IF THIS REMEDY IS ADJUDICATED TO BE INSUFFICIENT FLIR SHALL REFUND PURCHAS ER S PAID PURCHASE PRICE AND HAVE NO OTHER OBLIGATION OR LIABILITY TO BUYER WHATSOEVER 5 WARRANTY EXCLUSIONS AND DISCLAIMERS FLIR MAKES NO OTHER WARRANTY OF ANY KIND WITH RESPECT TO THE PRODUCTS ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MER CHANTABILITY FITNESS FOR A PARTICULAR PUR POSE EVEN IF PURCHASER HAS NOTIFIED FLIR OF ITS INTENDED USE FOR THE PRODUCTS AND NON INFRINGEMENT ARE EXPRESSLY EXCL
14. d shipping costs Upon receipt of an author ized non warranty return FLIR will evaluate the Product and contact Purchaser regarding the feasibility of and the costs and fees associated with Purchaser s request Pur chaser shall be responsible for the reasonable cost of FLIR s evaluation for the cost of any repairs or services authorized by Purchaser and for the cost of repackaging and returning the Product to Purchaser Any non warranty repair of a Product is warranted for one hundred eighty days 180 days from the date of return shipment by FLIR to be free from defects in materials and workmanship only subject to all of the limitations exclu Sions and disclaimers in this document 311559827 r AD 10339 10339 en US 30 A note on the technical production of this publication This publication was produced using XML the eXtensible Markup Language For more information about XML please visit http www w3 org XML A note on the typeface used in this publication This publication was typeset using Linotype Helvetica World Helvetica was designed by Max Miedinger 1910 1980 LOEF List Of Effective Files T501026 xml en US AD 10339 2013 12 12 311559827 r AD 10339 10339 en US 32 FLIR Corporate Headquarters FLIR Systems Inc 27700 SW Parkway Ave Wilsonville OR 97070 USA Telephone 1 503 498 3547 Website http www flir com Customer support http support flir com Publ No Re
15. d videos sss 20 5 8 Video output to a TV or external monitor o 22 5 9 esencia cade cda ll a a ll a ad de tee 22 5 10 A AA i ere ee deren a 22 6 Maintenances iio u vx REIR E M EUR xn E eee na 23 6 1 Cleaning ce ecc eot eet be oae i endete s 23 6 2 Battery recharging csse 23 7 Technical specifications eese 24 7 1 Monitorizaci n 24 7 2 MANS Musa a 25 7 3 CM a s sia hann ha ais 25 7 4 Probes and cameras 22sssseeenenenannnnnnnnnnnnenn 26 311559827 r AD 10339 10339 en US v Table of contents 7 5 Earphones cians areas 26 7 6 Part numbers detraxit ee ed 26 8 Technical support 28 9 FLIR Test and Measurement Limited 2 Year Warranty 29 311559827 r AD 10339 10339 en US vi 1 Disclaimers 1 1 Copyright 2013 FLIR Systems Inc All rights reserved worldwide No parts of the soft ware including source code may be reproduced transmitted transcribed or translated into any language or computer language in any form or by any means electronic magnetic optical manual or otherwise without the prior written per mission of FLIR Systems The documentation must not in whole or part be copied photocopied repro duced translated or transmitted to any electronic medium or machine readable form without prior consent in writing from FLIR Systems Names and marks appearing on the products herein are either registered trade
16. e monitor becomes unresponsive due to electromagnetic interference or oth er magnetic event use a paper clip or other narrow object to press the Reset but ton located on the bottom of the monitor 5 10 Rear stand The rear stand can be set to three positions lower position stored middle posi tion for bench viewing and upper position for hanging 311559827 r AD 10339 10339 en US 22 6 Maintenance 6 1 Cleaning Clean the monitor articulating probe wireless transmitter and accessories with a damp cloth and mild detergent do not use abrasives or solvents 6 1 2 2 Battery recharging Ensure that the monitor is switched off Connect the AC adaptor to the monitor After several hours press the button to switch on the monitor The battery voltage status is indicated on the display The battery is fully charged NN The battery charging is still in process E NE NIE NEN If the battery is fully charged remove the AC adaptor and observe that the fully charged four bar indicator appears LITT If the battery is not fully charged press the button to switch off the monitor and continue charging Note The battery will not charge properly if the monitor is switched on during the charging cycle 311559827 r AD 10339 10339 en US 23 7 Technical specifications 7 1 Monitor LCD screen 145 mm 5 7 viewable 135 mm 5 3 Active matrix 640 x 48
17. front view camera lens e Press the button to take a picture Press and hold down the button for 3 seconds to start stop re cording a video Press the button to rotate the display 90 GE Press the buttons to increase decrease the display resolution Gb Press the buttons to increase decrease the camera LED light intensity Press and hold down the button for 5 seconds to switch on off the monitor Press the buttons to navigate up down in the setup menu Press the 4 button to access the picture video memory Press the button to open the setup menu Press the button to select the highlighted menu item Y sj 9 Press the button to exit the setup menu 4 1 2 Display icons Indicates that a picture is being taken a e Indicates that a video is being recorded III i Indicates the battery voltage status 311559827 r AD 10339 10339 en US 4 Description Indicates that a stored picture is being displayed Indicates that a stored video is being displayed Indicates playback of a stored video Indicates paused playback of a stored video Bt m 4 2 Articulating probe 5 6 7 Figure 4 4 Articulating probe Articulation knob up down Articulation knob left right Tension kno
18. ies if the device is not used for an extended period of time A WARNING Make sure that children cannot touch the device The device contains danger ous objects and small parts that children can swallow If a child swallows an object or a part speak with a physician immediately Injury to persons can occur A WARNING Do not let children play with the batteries and or the packing material These can be dangerous for children if they use them as toys A WARNING Do not touch expired or damaged batteries without gloves Injury to persons can occur A WARNING Do not cause a short circuit of the batteries This can cause damage to the in strument and can cause injury to persons 311559827 r AD 10339 10339 en US 2 Safety information A WARNING Do not put the batteries into a fire Injury to persons can occur A CAUTION For the Articulating Probe do not operate the articulation knob with the probe in a coiled configuration This will cause damage to the articulation controls A This symbol adjacent to another symbol or terminal indicates that the user must refer to the manual for further information A This symbol adjacent to a terminal indicates that under normal use hazardous voltages may be present O Double insulation 311559827 r AD 10339 10339 en US 3 Introduction Congratulations on your purchase of
19. lease Commit Head Language Modified Formatted 5 T559 82 T559827 AD 10339 10339 en US 2013 12 12 2013 12 19 7
20. mory press the button 5 72 Transferring files to a PC There a two methods for transferring stored picture video files to a PC Remove the SD card from the monitor and insert it into the PC e Connect the monitor to the PC with a USB cable Organize Sharewih Bum Newfolder lame fl Computer Local Disk C ee Removable Disk E J Dam de 100DSCIM J Misc E IMG00001 JPG E IMG00002 JPG IMG00003 AVI E IMG00004 JPG E IMG00005 JPG Pictures are saved in JPG format and videos in AVI format 5 73 Deleting the picture video memory 1 Inthe setup menu select DELETE ALL Refer to section 5 2 Setup menu page 14 The ERASE YES NO box appears oi 2 Pressthe 4 button to select YES Press the button to delete all files in the memory a Press the button to exit without deleting the file 311559827 r AD 10339 10339 en US 21 5 Operation 5 8 Video output to a TV or external monitor The monitor can be set to output the high quality video to a TV or other external video monitor 1 Inthe setup menu under VIDEO FORMAT select PAL or NTSC to match the TV external monitor to be used Refer to section 5 2 Setup menu page 14 2 Connectthe video cable to the video output jack located on the bottom of the monitor Connect the other end of the cable to the video input jack of the TV or other external monitor The high quality video image is displayed on the TV external monitor 5 9 Reset If th
21. obe page 10 Note Do not operate the articulation knobs see Figure 4 4 Articulating probe page 10 with the probe in a coiled configuration This will damage the articulation controls 311559827 r AD 10339 10339 en US 16 5 Operation 5 5 1 Articulating probe wireless version Note The articulating probe battery must be fully charged for wireless operation A weak battery may result in shut down of data transmission Note The FLIR VS70 wireless operation transmits on 2 4 GHz which may interfere with other equipment operating on this same frequency 1 Connectthe AC adaptor to the articulating probe and charge the battery if necessary 2 Onthe monitor press and hold down the button for 5 seconds to Switch on the monitor 3 Inthe setup menu under INPUT SOURCE select WIRELESS Refer to sec tion 5 2 Setup menu page 14 4 On the articulating probe press and hold down the button for 5 sec onds to switch on the articulating probe The camera video is displayed on the monitor display 311559827 r AD 10339 10339 en US 17 5 Operation 5 Insertthe probe into the area to be examined Adjust the camera tip to the re quired viewing angle 5 5 2 Articulating probe direct version 1S ge 3 18go088 1 Connect the articulating probe to the probe connector on the monitor using the supplied patch cable 2 Onthe monitor press and hold press and hold down the b
22. oximate 0 43 kg 0 95 Ib 7 3 Camera Imaging Sensor CMOS Video Format NTSC Brightness Control Manual Lamp Type LED Interface Composite video Operating Temperature 10 C to 50 C 14 to 122 F T559827 r AD 10339 10339 en US 25 7 Technical specifications 7 4 Probes and cameras Articulation 240 20 manual tip articulation Accessories Mirror magnet and anti snag ball ex cluding 25 mm diameter cables 7 5 Earphone Flug 3 5mm 0 14 e 4rings Speaker e 15mm 0 59 e 320 e 20 20 kHz Microphone 6 x 5 mm 0 24 x 0 2 Boom microphone total length 10 cm 3 9 Color Black Wire length 1 2 m 3 9 7 6 Partnumbers Part number Description VST Wireless 2 4 GHz VS70 transmitter VSA2 1 w Wireless 2 way 6 mm 0 24 articulating camera with 1 m 3 3 probe VSA2 2 w Wireless 2 way articulating camera with 2 m 6 6 probe VSA2 1 2 way 6 mm 0 24 articulating camera with 1 m 3 3 probe VSA2 2 2 way 6 mm 0 24 articulating camera with 2 m 6 6 probe 311559827 r AD 10339 10339 en US 26 7 Technical specifications Part number Description VSC3 9 1FM 3 9 mm 0 15 camera with 1 m 3 3 flexible probe QVGA via SF VSC4 1 2RM 4 1 mm 0 16 camera with 2 m 6 6 SR probe QVGA via SF VSC5 8 1RM 5 8 mm 0 23 camer
23. this FLIR VS70 video boroscope This instrument is designed for use as a remote inspection device It can be used to peer into tight spots and record and playback real time video and images Typical applications include HVAC inspection cable routing and automotive boat aircraft inspection The monitor is designed with dual left or right handed controls for maximum flexibility and is available with a full line of accessories This boroscope is shipped fully tested and with proper use will provide years of reliable service 311559827 r AD 10339 10339 en US 4 Description 4 4 Monitor Figure 4 1 Monitor front view 1 Function buttons see section 4 1 1 Function buttons page 9 2 Display 311559827 r AD 10339 10339 en US 4 Description Figure 4 2 Monitor rear view 1 Probe connector 2 Rear stand a c 390 lt O E e Deco YAA Y 112 3 4 5 6 Figure 4 3 Monitor bottom view with access cover removed USB connector Reset button SD card slot Video output jack Headset jack audio and mic AC adapter connector omgsfom 311559827 r AD 10339 10339 en US 4 Description 4 1 1 Function buttons For two camera probes press the button to toggle between the side view and the
24. to request an RMA number visit http www flir com Purchaser is solely responsible for complying with all RMA instructions provided by FLIR including but not limited to adequately packaging the Product for shipment to FLIR and for all packaging and shipping costs FLIR will pay for returning 311559827 r AD 10339 10339 en US 29 9 FLIR Test and Measurement Limited 2 Year Warranty to Purchaser any Product that FLIR repairs or replaces under warranty FLIR reserves the right to determine in its sole discretion whether a returned Product is covered under Warranty If FLIR determines that any returned Product is not covered under Warranty or is otherwise excluded from Warranty coverage FLIR may charge Purchaser a reasonable han dling fee and return the Product to Purchaser at Purchas er s expense or offer Purchaser the option of handling the Product as a non warranty return 7 NON WARRANTY RETURN Purchaser may request that FLIR evaluate and service or repair a Product not cov ered under warranty which FLIR may agree to do in its sole discretion Before Purchaser returns a Product for non warranty evaluation and repair Purchaser must con tact FLIR by visiting http www flir com to request an eval uation and obtain an RMA Purchaser is solely responsible for complying with all RMA instructions pro vided by FLIR including but not limited to adequately packaging the Product for shipment to FLIR and for all packaging an
25. utton for 5 seconds to switch on the monitor The camera video is displayed on the monitor display 3 Inthe setup menu under INPUT SOURCE select DIRECT Refer to section 5 2 Setup menu page 14 4 Insert the probe into the area to be examined Adjust the camera tip to the re quired viewing angle 5 6 Wireless transmitter The wireless transmitter is intended for use in areas that are difficult to access or in situations where it is hard to maneuver the probe with the display attached The wireless transmitter can also be connected directly to the monitor using the patch cord 311559827 r AD 10339 10339 en US 18 5 Operation 5 6 1 Wireless transmitter wireless version The wireless transmitter battery must be fully charged for wireless operation A weak battery may result in shut down of the transmitter Note The FLIR VS70 wireless operation transmits on 2 4 GHz which may interfere with other equipment operating on this same frequency Connect the AC adaptor to the wireless transmitter and charge the battery 2 Attach the probe to the wireless transmitter 3 Onthe monitor press and hold down the button for 5 seconds to switch on the monitor 4 Inthe setup menu under INPUT SOURCE select WIRELESS Refer to sec tion 5 2 Setup menu page 14 5 Onthe wireless transmitter press and hold down the button for 5 sec onds to switch on the transmitter The camera video is displayed on the mon
26. view camera DATE TIME SETUP Select the date and time format set the date and time and select display on off when on the date and time are shown on the display and on the pic tures videos LANGUAGE Select the menu display language VIDEO FORMAT Set the video output to NTSC or PAL format Press either of the two camera buttons upper right or upper left button to access the Factory Default menu for camera brightness contrast hue and saturation settings See section 5 3 Factory Default Profiles menu page 15 for more information AUTO POWER OFF Set auto power off to 5 10 15 or 30 minutes or DISABLE INPUT SOURCE Set the input source to DIRECTor WIRELESS ol 1 Press the button to open the setup menu 2 Press the 4 or lw button to navigate to the desired menu item ol 3 Press the button to select the highlighted menu item 311559827 r AD 10339 10339 en US No 5 3 Operation Press the 4 or lw button to scroll through the options in an open menu item Press the 4 or lw button to increase decrease the selected value ee Press the button to exit without saving After a change do one of the following Press the button to save the changed value J Pressthe button to exit without saving Note After 10 seconds of inactivity the setup menu will exit without saving any changes tu Press the button to move up one step in the menu
Download Pdf Manuals
Related Search