FMG031 User Manual - With Paulight Tracker
Contents
1. Ses a x x ii n eee eu e it XIX e lt Transmitter Off Transmitter On Arm by Transmitter With SMS Feedback Arm by Transmitter Without SMS Feedback Disarm by Transmitter With SMS Feedback Disarm by Transmitter Without SMS Feedback GPS Signal Reconnection Notice No GPS Signal Reconnection Notice Available GEO Fencing Unavailable GEO Fencing Timer Engine Start On Timer Engine Start Off Internal Shock Sensor On Internal Shock Sensor Off Adjust Internal Shock Sensitivity As Low Adjust Internal Shock Sensitivity As Middle Adjust Internal Shock Sensitivity As High Car Is Manual Shift Car Is Automotive Shift Activate Transmitter Learning Mode Door opened amp ACC ON Tracker On Tracker Off Ignition Timer Is 0 6s Ignition Timer Is 0 8s Ignition Timer Is1 0s 80kph Speed Warning 90kph Speed Warning 100kph Speed Warning 110kph Speed Warning 120kph Speed 103 104 105 106 107 108 109 1102 1112 112 1152 1162 117 1182 121 122 123 124 125 126 481 482 471 472 473 308 309 310 311 312 Transmitters are bypassed Available transmitters Message feedback when arm No message feedback when Message feedback when disarm by remote No message feedback when Disarm by remote GPS reconnect remind ON GPS reconnect remind OFF GEO Fencing ON GEO Fencing OFF Low shock2. 2sec siren will chirp twice the system dome light delay time is 30 sec During this 30sec if you open the door the system will not alarm Model 1 selected If any door is not closed well when the car is armed the system will alarm for 10 sec after 5 sec automatically to remind the driver to close the door Dome light delay time is 5 sec Model 2 selected If any door is not closed well when the car is armed the system will alarm for 10 sec after 30 sec automatically to remind the driver to close the door Dome light delay time is 30 sec 7 Side Door Alert Programmable While driving if any door is not closed well turn signals will flash to warn the vehicles behind To activate this function open the door turn the car key to ON position and press for 2sec siren chirps once and turn signals flash once Press 9 for 2 sec again to disable this function siren will chirp twice and turn signals will flash twice 8 Automatic Environment Recognition In terrible weather such as heavy rain or windy and snowy day the system will shut shock trigger function automatically after being triggered and alarming 8 times continuously When the environment turns well after 4 minutes the shock trigger function will resume automatically 9 Shock Sensor Bypassed In arming mode press i KIA for2 Sec siren chirping twice and turn signals flashing twice indicate that shock sensor is bypassed siren chirping once and turn signals flashing once indica
3. ALARM FEATURES 1 Triggered Alarming In arming mode if someone forces to open the door turn ACC to ON step on the foot brake or other abnormal condition occurs the system will be triggered and alarming siren chirps turn signals flash the engine is interrupted and the car cannot be started The alarming will stop after 30 sec and the system will resume to the arming mode N Shock Triggered In arming mode if the car is impacted turn signals will flash for 5 sec and siren will sound for 5 sec if the car is impacted continuously or collided turn signals will flash for 30 sec and siren will sound for 30 sec 3 Automatic Rearm In disarming mode if none of the triggering zones is triggered the system will rearm automatically after 30 sec 4 Automatic Central Lock During driving process all doors are closed well turn ACC to ON position step on the foot brake after 15sec doors will be locked automatically Pull out the key before you get off the car doors will be unlocked automatically 5 Power off Memory No matter how long the vehicle power has been cut off the system will resume the last setting status after 5 seconds when the battery is reconnected 6 Dome Light Delay Programmable Model 1 ACC ON open the door and press mm m for 2sec siren will chirp once the system dome light delay time is 5 sec During this 5sec if you open the door the system will not alarm Model 2 ACC ON open the door and press mm m for
4. GSM network works and the main bound phone set succeeds if no answer or can t get through with the SIM card it means that the system cannot connected to the GSM network and has no main bound phone set Please disarm the system by transmitter and take away the back up battery and cut off the main power check whether the GSM antenna is attached well or whether the SIM card inside the product is placed well After checking everything well repeat step d If user s phone is connected with the system well and set as the 1 supervisor phone it means that the installation is successful ADDITIONAL NOTICE ee A While driving the user cannot control the system such as arm disarm etc The system will send SMS feedback of No operation allowed while driving to the 1 supervisor phone When the user controls the system by calling the system and six wrong operations are done continuously the calling will stop automatically This model works in 4 GSM network 900M 1800M 850M and 1900M There is a backup battery inside the main unit When the system s wires are cut the backup battery will support the system to send warning to the bound phones via SMS and calling Attention system is damaged Power off Longitude latitude When the system s wires are re connected the backup battery will be charged automatically The user can locate the car via sending SMS or making a call to the system at anywhere and anytime The system wi
5. equipped with the start button pls refer to the Phone Operation Code List P14 15 3 The model s transmitters are learnt before delivery If a new transmitter needs to be learnt please learn codes as following A The first way In disarming mode open the side door step on the foot brake and turn the car key from OFF to ON continuously for 5 times Stay the key at ON position at the 5 time The second way Open the door press the smart button to ACC ON status or use the main bound phone to call the system and input the operation code 71 a voice of operation is successful will be heard Siren will give a long sound LED indicator will keep on to indicate that the system has entered into Code Learning Mode B Within 10 sec press any button on the transmitter Siren chirps once to indicate that the 1 transmitter is learnt C Repeat Step B to learn other transmitters Siren chirps twice indicate the 2 transmitter learnt chirps 3 times indicate the 3 transmitter learnt and so on When the 6 transmitter is learnt siren will chirp twice to indicate that all transmitters are learnt and the learning mode exits D Up to 6 transmitters can be learnt If the 7th transmitter is learnt the 6 existing codes will be deleted automatically Therefore all transmitters should be learnt again E During learning process if the car key is turned to OFF and there is no operation within 10 sec learning mode will exit automatically and siren wi
6. sensitivity Midrange shock sensitivity High shock sensitivity Car is with manual shift Car is with automatic shift It s ready to learn transmitters 80km h speed warning ON 90km h speed warning ON 100km h speed warning ON 110km h speed warning ON 120km h speed warning ON 14 e X X X X S X X A X X x X X A A Com MN MN MN Time zone Setting 818 080 New Time zone is GMTO8 08 00 O 00 The following operation only can be set by the 1 supervisor phone Operation Voice CALL SMS Reset Operation 808new New operation X operation password X J tno poeta emere e m Set 1 Supervisor 801 phone The 1 owner is x x J ESI omen Set 2nd Supervisor 802phone The 2 owner is meer mme omen o Set 3 803phone The 1 spare user is Contactor Phone number XXXXXXXXXX Number Set 4 Contactor 804 phone The 2 spare user is x x J mamme wem mem o oo ee Set 5 Contactor 805 phone The 3 spare user is x x J mewn wer meee 00 0 Note 1 The above settings must have been done by the 1 Supervisor Phone Number 2 When the user gets through the device at the 1 time after 5 sec input 002 to set the calling phone number as 15 Supervisor Phone Number Notice 1 Please make sure that there are no spaces when you are inputting these orders 2 If there s any wrong input when the user sends SMS order to the device he can inp
7. USER S MANUAL Model FMG03 1 GPS GSM Car Alarm System With Engine Start CONTENT OF MANUAL Introduction of FMG031 Car Alarm System ccc ccc eee n ee hse messen nnn nnns 2 CONDONE Hes NSE IRE E m 2 Specification f al LCS 7 e he en one ene ee ee ee ee ee ee eee 2 Transmitter Operation ccc eee eee eee nnn esses seen ness Ee ee nnn n n assesses sss n asses nan 3 Transmitter Function Program sssssssssssssssssssssssss e n e essem nsns enhn n enn a arn nnne nnns 4 Car nudi KW 4 5 PHONG GSM Using GUNG c 6 7 Phone Relevant Data Setting sssssssssssssssssssssssssse ese nn eese EEE Eee nD EEE EEE n enses rns T Long Range Engine Start Methods sssssuusssssssssssssssssssssss essen ness nsns sene nnn nns 8 10 Long range Engine Start Timer Engine Start Engine Start Button S09 DUNO hit E E E ee ee ee eee 10 Anti hijacking MIGINOGS APER E 11 VOICE MONIO so P P 11 GPS Tracking C0 ee ee eee 12 Mobile Phone Software Introduction 0 c ccc ccc ence ee eee nee nee eee eee enn e anes enses enn sss nnns 13 Phone Operation Gode List si ncsesciadeasaxenndverndesduayaviestansporsvaeancaeptaruanngsereniatstenbersesrmenn dates ue bna 14 15 2 Way Car Alarm Re
8. assword to the SIM card inside the main unit If you use 2 supervisor phones to control the system you only need to send the operation code without the operation password The default operation password is 123456 You can set a new operation password by the 1 supervisor phone gt Operation Code Operation code is formed by 3 digits among 0 9 Operation code is used to control the system Such as the operation code 001 is used to arm the car etc Refer to Phone Operation Code List of P14 15 gt ime Zone Setting This function is to set your locate real time into this car alarm system PHONE RELEVANT DATA SETTING P Notice these data are important and only can be set by the 1 supervisor phone amp only sending SMS to set is available gt To Set A New 1 Supervisor Phone After installation when the user gets through the main unit at the 1 time after 5 sec input 0027 to set the calling phone number as 1 Supervisor Phone Number But after that if you want to change the other phone as the 1 supervisor phone please operate as follows Operation Code SMS Response Note There should be no blank space among the words when sending SMS gt To Set The 2 Supervisor Phone amp 3 Spare Phones Set the 2 Supervisor Phone 7 Operation Code SMS Response Note There should be no blank space among the words when sending SMS Set the Spare Phones Operation Code SMS Response 803 phone number The 1 spare u
9. at you read this manual carefully firstly and trust with professionals to install the system in your car We hope that the system will live up to your expectations make you confident about the safety of your car and essentially increase its comfort due to various service functions Please install and operate as following instructions COMPONENTS LIST F 1 pcs Main Unit of FMG031 FMG031 1 pcs Siren with 6 tones 1 pcs GSM Antenna for receiving signal from GSM network Optional 1 pcs GPS Antenna for receiving signal to track the current location 1 pcs Extra Antenna for transferring signal to the transmitter 2 pcs Transmitters 3 pcs Wire Harnesses 1 pcs Microphone for voice monitor optional 1 pcs Start Button optional 1 pcs SOS button 1pcs Back Up Battery for keeping the main unit send alarm when wires are cut 1 pcs Shock Sensor IOS amp Android App p Star Button 1 pcs Relay 1 pcs GPS Module Number Paster SPECIFICATION OF FMG031 Static Current Back Up Battery Lithium Cell 3 7V 650mA Work Temperature 30 C 80 C Main Unit Size 136 x88 X32 mm 10 C 50 C Main Unit Weight 250g New Optional Functions Optional I Bluetooth PKE What is the Bluetooth PKE Any of our car alarm system is able to connect with the blue tooth control module A special APP is needed to be installed to the user s mobile phone and then he can control his car directly by his mobile phone via Bluetooth This APP use to instead of the rem
10. ediate Delay Flameout method Refer to Operation Code List P14 operation code 124 and 12545 SOS BUTTON f there is any emergency happened the driver can push the SOS button inside the car pls install this button in a hidden place The siren will alarm once And the system will send SOS message to all of the bound phones both main phone and spare phones for urgent help ANTI HIJACKING METHODS Anti hijacking mode is for stopping and immobilizing the engine by force when the car is in danger of being robbed or in other emergent situations gt gt Anti hijacking By Transmitter While driving if there is any emergency occurs press X for 2 sec turn signals will flash quickly Press dmi once within 10 sec turn signals will stop flashing After 15sec system enters into anti hijacking mode siren chirps and turn signals flash If the moment driving speed is less than 20km h or after the other 15 sec when you step on the foot brake the engine is forced to stop working Press m for 2 sec to deactivate this function gt gt Anti hijacking By Phone Operation Code is 0067 In any status send SMS with the operation code or make a phone call to the SIM card inside the main unit to send this order the anti hijacking mode will be activated siren will sound turn signals will flash when the driving speed is lower than 20Km h the engine will be forced to be off At the same time the transmitters will be disabled automatically The 1 super
11. en the system will resume to former arming mode When the engine is started shock sensor will not be detected until the engine is disabled e When the engine is started the driver can press mi to disarm and unlock f If the engine cannot be started or the engine is disabled again the system will detect the status automatically for 5 times and start the engine again If at the 5 time the engine is still not started it indicates that the power of vehicle battery is lower than 9V Siren will give two long sounds to warn g The engine will be started for 20 minutes After 20 minutes if the driver doesn t disarm and unlock siren will chirp for 3 sec and then the engine will be disabled automatically and the system will resume to the former arming status C Once Engine Start By Phone Operation Code is 0107 In arming mode send SMS with the operation code or make a phone call to the SIM card inside the main unit to send the engine start order the engine will be started at once for 20 minutes The 1 supervisor phone will get a SMS Voice response with Your vehicle is started Notice a If the hand brake is not pull up any door is not closed well or the system is not in arming mode this operation will not be allowed and SMS feedback The hand brake is not pull up The engine cannot be started Invalid operation or Your vehicle is disarmed The engine cannot be started b While start engine the car will be kept in arming
12. he SIM card into the main unit after cut off main unit power and take away the inside battery GPS antenna should be placed flat and main face should be up the leaning angle can t be more than 45 Please install the system in a hidden place to protect it from invalid un installation and also keep in in a dry place to avoid damage from the wet Don t put the system near the engine as the high temperature will make the system work abnormally and shorten its life After installation please pack the connected wires well and must keep it insulating from the car body to avoid accident caused by short circuit gt gt Installation Steps a Before installation please prepare an ordinary mobile phone SIM card with GPRS available This SIM card will be phone number of the system To ensure the system work successfully please make sure that the telephone charge of the SIM card is enough Please install the product according to the Wire Diagram in a hidden place P18 After all the wires connected well please disconnect the main power and take away the back up battery Put the prepared SIM card into the SIM card socket and then connect the main power and put the back up battery into the main unit 60 sec after installation and being power on please use the phone to call the SIM card inside the system to make sure whether the system can connect to the GSM network or not If System is connected ready for setting is heard it means that the
13. ine start the user needs to keep pressing for 2 sec b by Phone If the hand brake is not pull up any door is not closed well or the system is not in arming mode this operation will not be allowed and SMS feedback The hand brake is not pull up The engine cannot be started Invalid operation or Your vehicle is disarmed The engine cannot be started gt gt Once Start Button Optional Feature gt Using Guide a Press the start button only it will be ACC ON OFF ON OF ON circularly b Step on the foot brake LED inside the button flashes and press this button once it will be Ignition ON OFF ON OFF circularly Engine start time is 0 6s 0 8s 1 0s refer to Operation Code List P15 Note a if you step on the foot brake press and hold the start button the engine will keep being started The engine can be started not more than 3 sec otherwise the engine may be damaged b if the wire of the foot brake is connected with the ACC ON only need to keep pressing the start button to start the engine c While driving keep pressing the start button to ACC OFF stop the engine It s no need to step on the foot brake gt Installation Guide Cut at 1mm Ignition Key a If there is only one wire of the steering wheel lock pls connect the two wires of the power Red at first and then connect with the lock s wire b Ifthere is the special socket of the steering wheel lock pls connect the pins to the socke
14. input the device s SIM card s number and the operation password The password should be consist of 6 numbers among 0 9 4 Installation is finished 5 The user can start operate the APPS and control the car alarm system PHONE OPERATION CODE LIST Note Default operation password is 123456 Operation CALL SMS SMS Feedback Voice Response Code Operation Operation meus mw amp x 4 mansus zw Pyes x x X v mwawsus mm em o 0x x X spanish sus ze Essa o X Portuguese sus zu Pogues x gt ommo ome ch 0 0 or om om feme mem o Umm uus Mamsot mems 4 4 meam o Aamso memso 4 v Car Finder 0042 Searching car Operation is successful Trunk Release 0052 Trunk is opened Trunk is opened Pe box v Anti hijacking Mode 0062 Emergency Engine died Emergency Engine J J emm e Senet re ft Take Photo 007 Operation is successful Operation is J J BUM EN MEMEENE SMS Location Report 0088 Coordinate and Google link Operation is J J Seren me Lome ee a a Engine Start 010 Your vehicle is started Your vehicle is J J a Da adie SEE eestor mere t ater tt off Windows Up 0122 Windows are closed Windows are closed Po 4 Po Voice Monitor On 01342 extemal Shock SersorOn 10i Soksemorison x Y o Eemal Shock Sensor 1024 Soksemorisof x d x x vy 13 x x x X X qoX x 2 x X
15. ll chirp twice to remind HE Arm Lock After disabling the engine getting away from the car and closing all doors well press dmi central lock locks siren chirps once turn signals flash once and windows are closed in 25 sec if the car is installed with power window The system will enter into arming mode after 3 sec B Disarm Unlock In arming mode pressm central lock unlocks siren chirps twice turn signals flash twice In mute arming mode press m central lock unlocks turn signals flash twice and the siren won t chirp amp all Car Finder In arming mode press once siren chirps for 25 sec and turn signals flash at the same time to search the car Press any button to deactivate this mode K A Mute Arm Lock After disabling the engine getting away from the car and closing all doors well press X central lock locks turn signals flash once siren will not chirp and windows are closed in 25 sec if the car is installed with power window The system will enter into mute arming mode after 3 sec Trunk Release In any status press m or for 2 sec to open the trunk In disarming mode open the door and turn ACC to ON oide Door Alert Press for 2 sec Activate Dome Light Delay Press imi m for 2 sec Flameout Method Press m XX for 2 sec Immediate Flameout Delay Flameout Automatic Arm Keep pressing mm for 2 sec X Disable NOTICE With signal X as factory setting before delivery CAR
16. ll send feedback of longitude latitude and Google link of map which the user can click directly by the mobile phone to check the map of location There is no limited range for this model Therefore if the car is robbed or witnessed being stolen to avoid closed attack the user can activate the anti hijacking mode after the car is driven to a distance When anti hijacking mode is activated the engine will be forced to be off and the system will send back GPS location feedback to help find back the car quickly To ensure good performance of the backup battery and avoid damage or explosion please keep it in a temperature from 10 C to 50 C If the user changes a new SIM card inside the main unit the existing relevant data such as main bound phone number local time data operation password etc will not be changed
17. main unit It realizes the function of controlling the car alarm system and protecting the car by mobile fixed phone And it means that the control range is not limited as long as the GSM network is available Lets see how to make it work as below Firstly after the installation is finished and before the power is connected put an available mobile phone SIM card inside the main unit and make sure the GPRS of this SIM card is available too to ensure the GPS PC tracking function will be successful Secondly after putting the SIM card well connect the power and use the user s mobile phone to call the phone number of the main units SIM card to check whether it can be gotten through or not If it cannot be gotten through cut off the power and take away the back up battery check whether the GSM antenna is attached well or whether the SIM card inside the main unit is placed well After checking everything well repeat a phone call until the SIM card inside the main unit is gotten through gt gt Phone Using Guide Pls use the mobile phone fixed phone to send SMS or call the main units SIM card to control the car alarm system Methods are as following gt by SMS if you use the 2 supervisor phones to control you just need to send the operation code of 3 digits plus to the SIM card inside the main unit just like to send a SMS to the other mobile phone if you use other mobile phones including 3 spare phones to control you need to send the ope
18. mode the ignition will be off when disarm c If the engine cannot be started successfully please also try to select different engine start time as 0 6 0 8 1 0 sec Pls refer to the operate code list P15 Attention Unavailable Engine Start A f the hand brake is not pull up when the driver tries to start the engine siren will give two long sounds to warn that the car is in abnormal condition And then the system will resume the former arming status B The system only can be re started for 5 times If it still cannot be started at the 5 time siren will give two long sounds to warn the driver that the car cannot be started by transmitter He should start the car with the key manually D Engine Off Flameout By Transmitter Press mi once to stop the engine The doors will not be unlocked and the system is still in arming mode If the user need unlock the door he needs to press mi again E Engine Off Flameout By Phone Operation Code is 011 gt Send SMS with the operation code 011 or make a phone call to the SIM card inside the main unit to send the flameout order the engine will be off at once and the car is still in arming mode The 1 supervisor phone will get a SMS Voice response with Your vehicle is engine off gt If the user sends the operation code 0027 which is the disarm order to the system the engine will not be stopped will be stopped optional but the doors will be unlocked and the car is in disarming mode H
19. n reset a new password and account name after successful registration 7 Login the website and operate as the website presents 8 The user can select time period to refresh the tracking data and it will cost the a few GPRS Note This feature is not surely available in all countries Because the current sample tracking server the tracking website is in China Pls check the sample at first If not and you need to make sure 100 it s available in your country you need to contact with the supplier for helping set up server for your country MOBILE PHONE SOFTWARE INTRODUCTION If the user s mobile phone is equipped with Android or iOS system the user can install our convenient mobile operation software in the mobile phone The APPS is only available in the 2 supervisor phones This APP is only for the user s easy amp comfortable control to the car alarm system Android System Installation 1 Ask the supplier manufacturer for the APPS or search FOMA in the Google Play 2 Install the APPS into your mobile phone 3 Open the APPS and input the main unit s SIM card s number and the operation password The password should be consisting of 6 digits among 0 9 4 Installation is finished 5 The user can start operate the APPS and control the car alarm system directly iOS System Installation 1 Search FOMA in the APP STORE and download the APPS 2 Install the APPS into your mobile phone 3 Open the APPS and
20. ng for 10 sec to indicate that the engine has been started At this moment the driver can press again to disable the engine and resume the system to former status When the engine is started the car will be detected automatically If any door is opened at this time engine will be interrupted immediately Turn signals will flash for 30 sec and siren will chirp for 30 sec and then the system will resume to former arming mode When the engine is started shock sensor will not be detected until the engine is disabled When the engine is started the driver can press Wi to disarm and unlock The engine will be started for 20 minutes After 20 minutes if the driver doesn t disarm and unlock siren will chirp for 3 sec and then the engine will be disabled automatically and the system will resume to the former arming status A Start Engine By Detection Transmitter Programmable a In arming mode press for 2 sec siren will chirp once and turn signals will flash 3 times engine will be started immediately When the engine is started turn signal will flash for 10 sec to indicate that the engine has been started At this moment the driver can press w again to disable the engine and resume the system to former status When the engine is started the car will be detected automatically If any door is opened at this time engine will be interrupted immediately Turn signals will flash for 30 sec and siren will chirp for 30 sec 8 and th
21. o distinguish the negative positive trigger please connect the wires as figure 2 and figure 3 2 ifthe car has been installed with the central lock system but there is no motor in the driver s 16 door the installer needs to install a motor to the driver s door first Please connect the wires as figure 4 3 if the car has been installed with the central lock system the installer can select pneumatic lock through the jumper inside the main unit please connect the wires as figure 5 B 12V relay NC Orange NC Orange mA Yellow COM White Off Signal COM White Off Signal NO Yellow NO Yellow rena ceos NC range Black sf NC range Black White Black Yellow Black COM White Black Open Signa COM ite Black Open Signal NO Yellow Black NO Yellow Black Figure1 Inner Part Principle Figure2 Negative Trigger Figure3 Positive Trigger Pneumatic Lock Main Unit In Car Orange White Main Line Orange Red Blue Positive Line 2 o 2 COM White Yellow i 2S NO Yellow range Black iS z NC range Black m White Black Ic COM ite Black Yellow Black 16 NO Yellow Black o gt Door Lock Switch Figure4 Positive Negative Trigger Figure5 Pneumatic Lock Connecting Line gt gt Installation Notice a For the car security and service functions most efficiently we recommend that you trust with professionals to install the system in your car To avoid to damage the SIM card please install t
22. ote controller and the control range will reach to 10m User can set a control range from mobile phone to his car when the user get close to his car in this range the car door will be unlocked automatically if the user goes out of this range the car door will be locked automatically What is the special App The special App is designed for controlling the car alarm via Bluetooth both of iPhone and Android system smart phones are able to install our special App Note please ensure the iOS system is over iOS 5 1 iPhone 4S Android system is over 3 0 version After the user installed this App then he can control the alarm system easily and no need to take the remotes all the way The smart phone can help you for handiness life Where you can download the App iPhone user For iPhone user they can go to App Store to download it by search the keyword FOMA_PKE directly Android user For Android user they can go to Google play to download it be search the keyword FOMA PKE How to learn the alarm system with Bluetooth module Note it works with our companv s alarm svstem onl After the Alarm enter the code learning status different alarm the code learning way will be different press the code switch the siren will chirp twice code learning successful Notice if you want to test whether the code learning Success press the code learning switch on the Bluetooth module once siren will chirp once How to lea
23. owever when the handbrake is pushed down the engine will be stopped automatically gt gt Timer Engine Start A Activate By Transmitter refer to Transmitter Function Program P4 to activate this feature firstly Then when the car is armed locked please keep pressing for 2 sec the engine will be started for 20 minutes to indicate that the Timer Engine Start function is available B Activate By Phone Operation Code is 115 in arming mode send SMS with the operation code to the SIM card inside the main unit to send this order the timer engine start function will be activated SMS responds Timer engine start is on Unavailable for making a CALL operation C Feature a When this function is activated the engine will be started automatically for 20 minutes and then stopped After 2 hours the engine will be started again for 20 minutes The engine will be started for 5 times b Each time you arm the car this function will be activated again D Disable By Transmitter refer to Transmitter Function Program P4 to disable this feature E Disable By Phone Operation Code is 1164 in arming mode send SMS with the operation code to the SIM card inside the main unit to send this order the timer engine start function will be disabled SMS responds 9 Timer engine start is off Unavailable for making a CALL operation Attention a If this function is activated by transmitter program each time to realize activate timer eng
24. ration password and the operation code together plus to the SIM card inside the system for example to arm the car the operation password is 123456 the operation code is 001 the content of SMS should be 1234560012 The system will send a SMS response the 1 supervisor phone to confirm the successful operation There will be no voice response gt by PHONE CALL if you use the 2 supervisor phones to control after getting through the SIM card inside the 6 main unit you just need to input the operation code plus to control the system If you use the other phones including the spare phones to control after getting through the SIM card of the system you need to input the operation password and the operation code together plus to control the system The system will send a SMS response and the voice response Thirdly before start to use the alarm system the user needs to set the relevant data explanation as follows which is to keep operation safe via the 1 supervisor phone Pls refer to Phone Relevant Data Setting P7 gt gt Relevant Data gt the 1 Supervisor Phone When the user gets through the device at the 1 time after 5 sec input O02 to set the calling phone number as 1 t Supervisor Phone Number Feature 1 supreme right to operate a The spare phones new operation password and new supervisor phones must be set by the existing 1 supervisor phone b The user can use the operation code 3 digi
25. rn the mobile phone to car alarm system For Android Check the Paired device in the mobile phone choose FOMA PKE after match Successful open the App click Setting open PKE select device Choose the paired device back to the interface At this time the Bluetooth icon will display the connection is successful If the connection is unsuccessful turn off the Bluetooth please reopen again After connect the mobile phone Bluetooth succeed press Bluetooth module learn code leaning switch 6 seconds until the red light on click the i in the app then the red light will off it means code leaning successful For iPhone The iPhone user no need to select the paired device the user just need to press Bluetooth module learn code leaning switch 6 seconds until the red light on chick the i in the app then the red light will off it means code leaning successful Optional II DVR The traditional portable DVR is stop recording when the ignition turns off but if it is connected to our GPS alarm system it will turn on automatically and start recording the conditions for 10 min even if the ignition is turned off when the car is triggered alarming This video clip will be locked in the memory card so that the user will never afraid to miss the evidence TRANSMITTER OPERATION Code Learning of Transmitter If the car did not equipped with the start button The user can learn the transmitters as following If the car is
26. ser is XXXXXXXXXX 804 phone number The 2 spare user is XXXXXXXXXxX 805 phone number The 3 spare user is XXXXXXXXXX Note There should be no blank space among the words when sending SMS gt To Set A New Operation Password Operation Code SMS Response 808 new password New operation passoword is XXXxxx Note There should be no blank space among the words when sending SMS Remark a The operation password should be six digits among 0 9 b To ensure the safety of your car please keep the operation password in mind and in secret gt To Set Local Time Zone Send order of the operation code the 4 numbers of the time zone to the main unit s SIM card For example Beijing s time zone is GMT 08 00 the content of the order will be 43 0800 Operation Code SMS Response 818 time zone New Time zone is GMT xx xx Note There should be no blank space among the words when sending SMS LONG RANGE ENGINE START METHODS gt gt Long range Engine Start The engine only can be started in arming mode The driver can start the engine manually or by the system s automatic detection A Once Engine Start by Transmitter Transmitter Programmable If the car is powered by diesel only Once Engine Start is available It can not be started by detection a In arming mode press for 2 sec turn signal flash 3 times siren chirps once and engine will is started After the engine is started turn signals will keep flashi
27. sponse icra ec nt ee PEERS dem uheridstas e MMTMEP REM UEM n ERA E eS CRM DPI 16 17 Installation of FWG031 Car Alarm System Main Unit Schematic OF FMGOS cccczansnnpatesieaawaeateuens EA N AEAN En a EADAR 18 Wire Diagram OFMGOS T xouebadsustiaidaetoldewsesd estes und pateat kde a aie nae ata may a N mo aetate dus 19 contral IDOOF LOCK DAOA sorrara nren e D TET Em 20 Installation Notice m 20 IriStallallori Ie DS eee een een ene ne eee ee ee ee eee ee ee eee ee 21 raCole iCelgt ih fo 6 ith eet ee ome 21 INTRODUCTION l Thank you for choosing FMG031 car alarm system This product is an intelligent car alarm system equipped with GSM module and GPS module It realizes truly protection and control of the car Except the basic car alarm features it has extra unique features including auto alarm response to user s mobile phone in emergency mobile phone remote anti hijacking once timer engine start for cooling the car in advance in summer heating the engine in advance in winter push start button in stead of car key SOS to mobile phone GPS tracking current location and voice monitor etc This product is controlled by transmitter At the same time putting an available phone SIM card inside the main unit the user also can use mobile fixed phone to control the product by sending SMS or making the PHONE CALL For the car alarm system to perform its security and service functions most efficiently we recommend th
28. t In any status send SMS with the operation code or make a phone call to the SIM card inside the main unit to send this order the system will send SMS feedback with longitude and latitude as well as a Google link of the map The user could visit the Google link by the mobile phone directly to search the location map When the car is stolen or robbed the longitude and latitude could help the police to find back the car more quickly 11 ka ea 4 DIAL NO 4 RECEIVING b 008 ur vehscie l h I Wn natos iude P i gt gt Method 2 PC GPS Real Time Tracking Operation Code is 481 gt This method helps the user tracking the car on the website gt It s free for the 1 year From the 2 year the user should charge the service fee CNY 100 year directly to the tracking website gt Tracking Steps 1 Make sure to activate the GPRS of your mobile phone 2 Activate GPS tracker at first by sending SMS with the operation code 481 or making a phone call to the SIM card inside the main unit The main bound phone will get a SMS response with Tracker is available 3 Write down the S N number from the back of the device or from the S N paster inside the package 4 Enter into the tracking website of www foma icar com 5 Register a new account with the S N number Login ID is the S N number and the password is the last 5 digits of the S N number 6 Input content as website presentation You ca
29. t directly Its no need to connect wires c Whenthe caris installed with the start button to use the button to start the engine successfully the steering wheel locks shouldn t be locked So the user should ask the locksmith key to copy the original car key Pls insert the copied key into the keyhole and turn it to the 1 or the 2 gear and cut it in 1mm in exposed Pls cover the button on the keyhole gt Engine Off Flameout Method Transmitter Programmable Refer to Transmitter Function Program P4 to choose immediate or delay flameout a Immediate Flameout suggested for automotive gearshift car When step on the foot brake and keep pressing the start button the ignition will be off at once Pls make sure the gear is moved to P and the hand brake is pull up after flameout b Delay Flameout suggested for manual gearshift car When step on the foot brake and press the start button siren will chirp once After 2 minutes the ignition will be off Within the 2 minutes the user can check whether the hand brake is pull up and the gear is stuck in neutral or not Notice gt We strongly suggest that you should program delay flameout if your car is manual gearshift It helps make sure that the hand brake is pull up and the gear is stuck in the neutral to prevent the car moving by itself when it is started by the phone transmitter in long range gt The user also can send operation code to the SIM card inside the main unit to select Imm
30. te that shock sensor is activated 10 Emergency Override In arming mode if the transmitter is lost or damaged you can disarm the system by opening the door with your original car key The system is triggered and alarming at the same time siren keeps chirping and turn signals keep flashing And then turn the car key from ON to OFF continuously for 5 times the system will be override Or you can buy a matched transmitter disarm the car by phone and then learn the new transmitter into the system 11 Selection of Power Lock and Pneumatic Lock Power Lock is set in factory before delivery The installer should open the casing of the main unit to select Pneumatic Lock 12 Closing Windows Signal Output In arming mode when press im or XIX to arm the system will send a signal to close the windows If the car is installed with power windows the windows will be closed within 25 sec 13 Triggered Alarm Memory In arming mode if the arming zones are triggered and alarming when the car is disarmed siren will chirp LED and turn signals will flash in different ways to warn Triggered Zone Arming Mode Disarming Mode Shock sensor is alarming LED flashes twice Siren chirps 3 times turn signals flash 3 times LED flashes 3 times LED flashes 4 times LED flashes 5 times When any door is opened after disarming siren will chirp once again to warn PHONE GSM USING GUIDE FMG031 car alarm system is equipped with a GSM module inside the
31. ts plus directly to control the system Feature 2 supreme right to know a When any phone is used to control the system the system will send SMS feedback to the 1 supervisor phone b The system will send alarms to the 1 supervisor phone both via SMS and CALL once the car is in danger emergency Note for your first knowledge to the car s status we strongly recommend you to set your own mobile as 1 supervisor phone gt the 2 Supervisor Phone to be set by the 1 Supervisor Phone Feature 1 The user can use the operation code 3 digits plus directly to control the system Feature 2 When emergency happened if the 1 Supervisor phone has no response to the alarm the system will send alarms to the 2 supervisor phone and the spare phones Pls refer to the Spare Phones as below gt 3 Spare Phones When the operation related to safety happened or when the car is in danger of being damaged or stolen the system will send the alarms to the 1 supervisor phone automatically at once But if it can not be gotten through or no one answers to ensure someone receives the alarm and protect the car effectively the system will begin to call the 2 supervisor phone and the spare phones circularly for 30 minutes until any one of them is answered There are 3 spare phones gt Operation Password When you need to control the system by other phones rather than 2 supervisor phones you have to send the operation code with the operation p
32. ut to erase the former content 3 When the user CALL to operate he can input to stop voice response 2 WAY CAR ALARM RESPONSE In arming mode if the car is collided any door the hood or the trunk is forced to be opened and the wires are cut the system will send warnings to the bound phones via SMS feedback and calling feedback automatically SMS amp Calling feedback as follows 4RECEIVING P Attention Attention someone breaks someone breaks into your vehicle into your Someone enters SSN c e vehicle into your vehicle fi n illegally N 4RECEIVING P Attention bins your vehicle The vehicle collided is collided is collided Attention The door of 73 4RECEIVING b your vehicle Side door 1s INI Attention is opened 2 q N 7 7 the door of your opened illegally i vehicle is opened lt 10 35 4RECEIVING gt Attention Your vehicle Attention f Your vehicle is started iq ct ad illeg AN is started illegally illegally 1035 4RECEIVING gt Attention cucto c F Z The system S a n Attention System is atten os Me E system is damaged wire 1s cut PE jos oan damaged SL eitude and power off a rare power off m Note a The system will send SMS warning and call the 15t supervisor phone to send warning at the first time If there is no answer the system will keep calling the 2 super
33. visor phone and the other 3 spare phones Within 30 minutes the system will keep calling the 4 bound phones circularly until any phone answers After 30 minutes the system will stop calling automatically b After the model s wires are cut if the backup battery capacity is low system will send warnings to the 1 supervisor phone automatically SMS feedback Attention low battery Please recover external power in time C After the model s wires are cut and then re connected the system will remind automatically by SMS feedback External power is recovered d After you answer the calling the system will also remind that system is connected ready for settings you can keep sending operation codes if it s necessary INSTALLATION OF FMG031 CAR ALARM SYSTEM gt gt Accessories location Antenna position D GPS antenna position Must put the front side toward to the sky Antenna Installation 1 If the wind shield is not pasted with rupture membrance please install the antennas as picture in the left shows If the wind shield is pasted with rupture membrance please cut the rupture membrance as picture in the left shows Otherwise it will make a bad influence on the range and GPS location Leave at least 10cm between antenna and metal parts to avoid bad influence on range gt gt Central Door Lock Diagram 1 ifthe car has been installed with the central lock system the installer only need t
34. visor phone will get a SMS or Voice response Emergency Engine died gt To exit send SMS with the operation code 00272 or make a phone call to the SIM card inside the main unit to activate the engine and the transmitters OICE MONITOR This product is equipped with a microphone We suggest to install it in a hidden place inside the car This feature is designed to mainly monitor who s talking and what they are talking inside the car in case the car is stolen robbed The Operation Code is 013 In any status make a phone call to the SIM card inside the main unit and input the operation code 013 according to the voice response the microphone will be activated The voice inside the car will be heard but there will be no warnings to the people who is inside the car While monitoring the other operations such as location anti hijack etc can be continued the voice monitor will be off after hanging up Note 1 The microphone only can be activated by making a PHONE CALL Order of sending SMS will be not available And there will be no SMS response 2 This feature only can be activated by the 1 supervisor phone There are 2 methods to track the current location of the car gt gt Method 1 Mobile Phone GPS Locating Operation Code is 008 gt This method helps the user get the car s current location to the mobile phone gt Its no need to pay the service fee for this feature Only SMS cost will be charged by telecom operators g
Download Pdf Manuals
Related Search