User`s manual for ELITE series
Contents
1. Cleaning the Grille Case and Remote Controller e Turn the system off before cleaning To clean wipe with a soft dry cloth Do not use bleach or abrasives NOTE Supply power must be disconnect before cleaning the indoor unit A cloth dampened with cold water may be used on the indoor unit if it is very dirty Then wipe it with a dry cloth e Do not use a chemically treated cloth or duster to clean the unit e Do not use benzine thinner polishing powder or similar solvents for cleaning These may cause the plastic surface to crack or deform e Never use water hotter than 40 C to clean the front panel it could cause deformation of discoloration Cleaning the air filter A clogged air filter reduces the cooling efficiency of this unit Please clean the filter once every 2 weeks 1 Lift the indoor unit panel up to an angle until it stops with a clicking sound 2 Take hold of the handle of the air filter and lift it up slightly to take it out from the filter holder then pull it downwards 3 Remove the AIR FILTER from the indoor unit e Clean the AIR FILTER once two weeks e Clean the AIR FILTER with a vacuum cleaner or water then dry it up in cool place A CS t LAY AS ae EAI OC eS T Air freshening filter __ CARE AND M2. The fan speed will be automatically controlled This feature can maintain the most comfortable temperature and save more energy for you DRYING operation e The dry mode will automatically select the hehumidifying operation based on the difference between the set temperature and the actual room temperature The temperature is regulated while dehumidifying by repeating turning on and off of the cooling operation or fan only The fan speed indicator will display AUTO and low speed will be used Optimal operation To achieve optimal performance please note the following e Adjust the air flow direction correctly so that it is not directed on people e Adjust the temperature to achieve the highest comfort level Do not adjust the unit to excessive temperature levels Close doors and windows on COOL or HEAT modes or perfor mance may be reduced Use TIMER ON button on the remote controller to select a time you want to start your air conditioner Do not put any object near air inlet or air outlet as the efficiency of the air conditioner may be reduced and the air conditioner may stop running e Clean the air filter periodically otherwise cooling or heating per formance may be reduced e Do not operate unit with horizontal louvre in closed position 7 CARE AND MAINTENANCE Care and maintenance Z x Household L Drain Cleaner
3. EE E E AE E eee 12 TROUBLESHOOTING TIPS TOUDIESNOO MOO TPS aeaa E ES ON 14 N CAUTION Contact an authorised service technician for repair or maintenance of this unit Contact the installer for installation of this unit The air conditioner is not intended for use by young children or invalids without supervision e Young children should be supervised to ensure that they do not play with the air conditioner e f the power cord is to be replaced replacement work shall be performed by authorised personnel only e Installation work must be performed in accordance with the national wiring standards by authorised personnel only SOCIABLE REMARK When using this dehumidifier in the European countries the follow informations must be followed DISPOSAL Do not dispose this product as unsorted municipal waste Collection of such waste separately for special treatment is necessary It is prohibited to dispose of this appliance in domestic household waste For disposal there are several possibilities A The municipality has established collection systems where electronic waste can be disposed of at least free of charge to the user B When buying a new product the retailer will take back the old product at least free of charge C The manufacture will take back the old appliance for disposal at least free of charge to the user D As old products contain valuable resources they can be sold to scrap metal dealers W
4. and select HIGH fan speed Heating mode For cooling and heating models only The air conditioner draws in heat from the outdoor unit and releases it via the indoor unit during heating operation When the outdoor temperature falls heat drawn in by the air conditioner decreases accordingly At the same time heat loading of the air conditioner increases due to larger difference between indoor and outdoor temperature If a comfortable temperature can t be achieved by the air conditioner we suggest you use a supplementary heating device Auto restart function Power failure during operation will stop the unit completely For the unit without Auto restart feature when the power restores the OPERATION indicator on the indoor unit starts flashing To restart the operation push the ON OFF button on the remote controller For the unit with Auto restart feature when the power restores the unit restarts automatically with all the previous settings preserved by the memory function 10 Lightning or a car wireless telephone operating nearby may cause the unit to malfunction Disconnect the unit with power and then re connect the unit with power again Push the ON OFF button on the remote controller to restart operation 7 TROUBLESHOOTING TIPS Troubleshooting Tips Stop the air conditioner immediately if one of the following faults occur Disconnect the power and contact the nearest customer service center RUN OPERATION indi
5. not be set too small as COOLING or HEATING performance may be impaired due to too restricted air flow area Do not operate unit with horizontal louver in closed position When the air conditioner is connected to power initial power the horizontal louver may generate a sound for 10 seconds this is a normal operation OPERATING INSTRUCTIONS How the air conditioner works SLEEP operation 4 hour 1 hour Cooling SLEEP operation E 7 hours timer off 1 hour 1 hour Heating DRYING operation Cooling Fan only Cooling Fanonly Cooling lt 4 gt Time Room temperature x set temperature AUTO operation e When you set the air conditioner in AUTO mode it will automatically select cooling heating cooling heating models only or fan only operation depending on what temperature you have selected and the room temperature e The air conditioner will control room temperature automatically round the temperature point set by you If the AUTO mode is uncomfortable you can select desired conditions manually SLEEP operation When you push SLEEP button on remote controller during cooling heating cooling only type without or AUTO operation the air conditioner will automatically increase cooling or decrease heating 1 C per hour The set temperature will be steady 2 hours later And the air conditioner will be timer off in 7 hours
6. run Always install circuit into electric parts breaker and a dedicated power circuit No earthing may cause electric It may cause failure of machine No installation may cause fire OAlways ensure effective earthing shock or electric shock and electric shock Disconnect the power if Do not drink water drained Do not open the unit strange sounds smell or from air conditioner during operation smoke comes from it It may cause fire and electric It contains contaminants and It may cause electric shock shock could make you sick Use the correctly rated Do not use the power cord Do not use the power cord near breaker or fuse close to heating appliances flammable gas or combustibles such as gasoline benzene thinner etc There is risk of fire or electric t may cause fire and electric t may cause an explosion or fire shock shock OVentilate room before operating air Do not disassemble or modify unit conditioner if there is a gas leakage from another appliance es It may cause explosion fire and burns e t may cause failure and electric shock P 3 7 SAFETY PRECAUTIONS 7 When the air filter is to be removed do not touch the metal parts of the unit e t may cause an injury When the unit is to be cleaned switch off and turn off the circuit breaker Do not clean unit when power is on as it may cause fire
7. AINTENANCE 4 Remove the air freshening filter from its support frame e Clean the air freshening filter at least once a month and replace it every 4 5 months e Clean it with vacuum cleaner then dry it in cool place 5 Install the air freshening filter back into position 6 Insert the upper portion of air filter back into the unit taking care that the left and right edges line up correctly and place filter into position Maintenance If you plan to idle the unit for a long time perform the following 1 Operate the fan for about half a day to dry the inside of the unit 2 Stop the air conditioner and disconnect power Remove the batteries from the remote controller 3 The outdoor unit requires periodic maintenance and cleaning Do not attempt to do this yourself Contact your dealer or servicer Checks before operation Check that the wiring is not broken off or disconnected e Check that the air filter is installed e Check if the air outlet or inlet is blocked after the air conditioner has not been used for a long time Do not touch the metal parts of the unit when removing the filter Injuries can occur when handling sharp metal edges e Do not use water to clean inside the air conditioner Exposure to water can destroy the insulation leading to possible electric shock e When cleaning the unit first make sure that the power and circuit breaker are turned off OPERATION TIPS The f
8. Before using your air conditioner please read this manual carefully and keep it for future reference SPLIT TYPE ROOM AIR CONDITIONER Read This Manual Inside you will find many helpful hints on how to use and maintain your air conditioner properly Just a little preventative care on your part can save you a great deal of time and money over the life of your air conditioner You ll find many answers to common problems in the chart of troubleshooting tips If you review the chart of Troubleshooting Tips first you may not need to call for service CONTENTS SOCIABLE REMARK SOCIADIS HENMAN ase cscs eies eeted acta deeched E Gaede tual ea AOE T A O N 2 SAFETY PRECAUTIONS WARMING cass E E E A T ETE AA AE AA A TAE A E 3 CAUTION mereunan uE EE A N E A sis A E O E 4 OPERATIING INSTRUCTIONS Pats NAMES assais ariiraa aE NEA a E A RENA N ASSE ANARA 5 Operation temperature s sssssssesrsestrtssttt eee eee eeeeeeeeeeee sae eee aaa eeeeaaeeeeeseeeeeseeeeeaeeeeesaaeeeesaees 7 Mantial Operation scccexccccvadssarsgcnncencncnexscdsanceenys caceuaasan ak E E O a 7 Airtlow direction CONN sziss2S2siedesscdesienaiescs cid iae2adeeseedinieddheetedstenaessinndadsduadcocsvebncuaseeizvaeeadeees 8 How the air conditioner WOFKS oo cece ce cece ccc ec cece iaie a paa a iaaii a aaaea 9 CARE AND MAINTENANCE Care and MAINTENANCE snersari neasi eaa a i E E aA eh Eaa E EN 10 OPERATION TIPS Operation dip Stee ana a E A E
9. and electric shock it may cause an injury Stop operation and close the window in storm or hurricane Operation with windows opened may cause wetting of indoor and soaking of household furniture Do not use strong detergent such as wax or thinner Use a soft cloth for cleaning Appearance may be deteriorated due to change of product color or scratching of its surface Do not place heavy object on the power cord and take care so that the cord is not compressed There is danger of fire or electric shock NN N CAUTION Do not clean the air conditioner with water Water may enter the unit and degrade the insulation It may cause an electric shock Do not put a pet or house plant where it will be exposed to direct air flow This could injure the pet or plant Do not place obstacles around air inlets or inside of air outlet It may cause failure of appliance or accident Ensure that the installation bracket of the outdoor appliance is not damaged due to prolonged exposure e f bracket is damaged there is concern of damage due to falling of unit Use caution when unpacking and installing Sharp edges could cause injury Ventilate the room well when used together with a stove etc An oxygen shortage may occur Do not use for special purposes Do not use this air cond itioner to preserve preci sion
10. cator or other indicators flash rapidly 5 times every second and this flash can t be fixed by disconnecting the power and then connect it in again Trouble Fuse blows frequently or circuit breaker trips frequently Other objects or water penetrate the air conditioner Other abnormal situations The remote controller won t work or works abnormally Malfunctions Cause What should be done Unit does not start Power cut Wait for power to be restored Unit may have become unplugged Check that plug is securely in wall receptacle Fuse may have blown Replace the fuse Battery in Remote controller may have been exhausted Replace the battery The time you have set with timer is incorrect Wait or cancel timer setting Unit not cooling or heating Cooling heating models only room very well while air flowing out from the air conditioner Inappropriate temperature setting Set temperature correctly For detailed method please refer to Using remote control section Air filter is blocked Clean the air filter Doors or Windows are open Close the doors or windows Air inlet or outlet of indoor or outdoor unit has been blocked Clear obstructions away first then restart the unit Compressor 3 minutes protection has been activated Wait If the trouble has not been corrected please contact a local dealer or th
11. devices food pets Panes and art objects t may cause deterioration of quality etc Turn off the main power switch when not using the unit for a long time t may cause failure of product or fire Always insert the filters securely Clean filter once every two weeks Operation without filters may cause failure Q If water enters the unit turn the unit off and disconnect the power contact a qualified service technician OPERATING INSTRUCTIONS Parts names Indoor unit Indoor unit 1 Front panel 2 Aijr inlet 3 Air filter 4 Air outlet 5 Horizontal air flow grille 6 Vertical air flow louver 7 Display panel 8 Remote controller signal receiver 9 Remote controller 10 Manual control button Outdoor unit 11 Connecting pipe drain hose 12 Air inlet side and rear 13 Air outlet NOTE All the pictures in this manual are for explanation purpose only Your air conditioner may be slightly different The actual shape shall prevail Indicator Lights on Display Window The operation indicator lights flash rapidly five times per second when safety protection features come into operation The display panel of indoor unit will lock like one of the following Signal receptor Signal receptor o o A H o o O O Anoe irar Sean aes AUTO DEFROST OPERATION TIMER i l d J TN 00 0 00 Note For c
12. e nearest customer service center Be sure to inform them of the detailed malfunctions and unit model Notes Do not attempt to repair the unit yourself Always consult an authorised service provider CS406 U 2200018040
13. ild disposal of waste in forests and landscapes endangers your health when hazardous substances leak into the ground water and find their way into the food chain N SAFETY PRECAUTIONS To prevent injury to the user or other people and property damage the following instructions must be followed Incorrect operation due to ignoring of instructions may cause harm or damage The seriousness is classified by the following indications N WARNING This symbol indicates the possibility of death or serious injury L CAUTION This symbol indicates the possibility of injury or damage to propery HM Meanings of symbols used in this manual are as shown below Never do this Always do this gt A Warning 9 Yo not operate or stop the Do not damage or use an Connect with the power de unspecified power cord properly unit by switching on or off the power Otherwise it may cause electric It may cause electric shock or fire It may cause electric shock or fire shock or fire due to excess heat due to heat generation generation Do not modify power cord Do not direct airflow at Do not operate with wet hands or in damp environment length or share the outlet room occupants only with other appliances t may cause electric shock or t may cause electric shock This could damage your health fire due to heat generation Do not allow water to
14. issing sound when the compressor is running or has just stopped running This sound is the sound of the refrigerant flowing or coming to a stop e You can also hear a low squeak sound when the compressor is running or has just stopped running This is caused by heat expansion and cold contraction of the plastic parts in the unit when the temperature is changing A noise may be heard due to louver restoring to its original position when power is first turned on 4 Dust is blown out from the indoor unit This is a normal condition when the air conditioner has not been used for a long time or during first use of the unit 5 A peculiar smell comes out from the indoor unit This is caused by the indoor unit giving off smells permeated from building material from furniture or smoke 6 The air conditioner turns to FAN only mode from COOL or HEAT For cooling and heating models only mode When indoor temperature reaches the temperature setting on air conditioner the compressor will stop automatically and the air conditioner turns to FAN only mode The compressor will start again when the indoor temperature rises on COOL mode or falls on HEAT mode For cooling and heating models only to the set point N ee co OPERATION TIPS Dripping water may generate on the surface of the indoor unit when cooling in a high relatively humidity relative humidity higher than 80 Adjust the horizontal louver to the maximum air outlet position
15. not receive the Follow Me signal during any 7 minute interval the unit will beep to indicate the Follow Me mode has ended NOTE This manual does not include Remote Controller Operations see the lt lt Remote Controller Instruction gt gt packed with the unit for details 7 Operating temperature OPERATING INSTRUCTIONS Room temperature Temperature Mode Cooling operation Heating operation Drying operation 17 C 32 C 17 Cy 30 C 17 C 32C Outdoor temperature 18 C 43 C C 24C 18 C 43 C CAUTION 1 If air conditioner is used outside of the above conditions certain safety protection features may come into operation and cause the unit to function abnormally 2 Room relative humidity less than 80 If the air conditioner operates in excess of this figure the surface of the air conditioner may attract condensation Please sets the vertical air flow louver to its maximum angle vertically to the floor and set HIGH fan mode 3 Optimum performance will be achieved within these operating temperature Manual operation Manul operation can be used temporarily in case you can not find the remote controller or its batteries are exhausted Manual control o AUTO COOL button Open and lift the front panel up to an angle until it remains fixed with a clicking sound One press of the manual control button will lead to the forced AUTO operati
16. ollowing events may occur during normal operation 1 Protection of the air conditioner Compressor protection e The compressor can t restart for 3 minutes after it stops Anti cold air Cooling and heating models only e The unit is designed not to blow cold air on HEAT mode when the indoor heat exchanger is in one of the following three situations and the set temperature has not been reached A When heating has just starting B Defrosting C Low temperature heating The indoor or outdoor fan stop running when defrosting Cooling and heating models only Defrosting Cooling and heating models only Frost may be generated on the outdoor unit during heat cycle when outdoor temperature is low and humidity is high resulting in lower heating efficiency of the air conditioner e During this condition air conditioner will stop heating operation and start defrosting automatically The time to defrost may vary from 4 to 10 minutes according to the outdoor temperature and the amount of frost buildup on the outdoor unit 2 A white mist coming out from the indoor unit e A white mist may generate due to a large temperature difference between air inlet and air outlet on COOL mode in an indoor environment that has a high relative humidity e A white mist may generate due to moisture generated from defrosting process when the air conditioner restarts in HEAT mode operation after defrosting 3 Low noise of the air conditioner e You may hear a low h
17. on Close the panel firmly to its original position CAUTION Once you push the manual button the operation mode is shifted in an order as AUTO COOL OFF Push the button twice the unit will operate in forced COOL mode This is used for testing purposes only Third press will stop the operation and turn off the air conditioner operation To restore the remote controller operation use the remote controller directly Airflow direction control 7 SET TEMPERATURE C AUTO FAN COOL HIGH DRY MED HEAT Low LO y TEMP A S MODE _ FAN SPEED SWING ECONOMY TIMER ON CRO OO ION resetiock TIMER OFF CO Rang OPERATING INSTRUCTIONS e Adjust the air flow direction properly otherwise it might cause discomfort or cause uneven room temperatures Adjust the horizontal louver using the remote controller Adjust the vertical louver manually To set the vertical air flow Up Down direction Perform this function while the unit is in operation Keep pressing the SWING button on the remote controller to move the louver to the desired direction Press SWING button to lock louver in desired position To set the horizontal air flow direction left right Adjust the vertical louver manually using the lever on the left o
18. ooling only models gt 21000Btu h unit indicator light is FAN ONLY AUTO indicator This indicator illuminates when the air conditioner is in AUTO operation DEFROST indicator For Cooling amp Heating models only This indicator illuminates when the air conditioner starts defrosting automatically or when the warm air control feature is activated in heating operation 5 7 OPERATING INSTRUCTIONS TEMPERATURE indicator Displays the temperature settings when the air conditioner is operational OPERATION indicator This indicator flashes after power is on and illuminates when the unitis in operation TIMER indicator This indicator illuminates when TIMER is set ON OFF Special functions Clean Air function optional Air quality is the key to comfort this air conditioner is equipped with lonizer device lonizer can generate abundant anions to fill the room with refreshing and nature air Wur whole family will enjoy a natural pure and healthy air everyday Follow Me function optional The remote control serves as aremote thermostat allowing forthe precise temperature control at its location To activate the Follow Me feature point the remote control towards the unit and press the Follow Me button The remote display is actual temperature at its location The remote control will send this signal to the air conditioner every 3 minutes interval until press the Follow Me button again If the unit does
19. r right side of the vertical louver arm Depending on model Take care not to catch fingers on the fan horizontal louver or to damage vertical louvers When the air conditioner is in operation and the horizontal louver is in a specific position move the lever at left or right depending on model end of the air outlet to the desired position To automatically swing the air flow direction up down Perform this function while the air conditioner is in operation e Keeppressing the SWING button without releasing for more than 2 seconds the horizontal louver will swing up and down automatically To stop the function press the SWING button again A CAUTION The SWING button will be disabled when the air conditioner is not in operation including when the TIMER ON is set Do not operate the air conditioner for long periods with the air flow direction set downward in cooling or dry mode Otherwise condensation may occur on the surface of the horizontal louver causing moisture to drop on to the floor or on furnishings Do not move the horizontal louver manually Always use the SWING button If you move this louver manually it may malfunction during operation If the louver malfunctions stop the air conditioner once and restart it When the air conditioner is started immediately after it was stopped the horizontal louver might not move for approximately 10 seconds Open angle of the horizontal louver should
Download Pdf Manuals
Related Search