SafestHelp – Alarm Clock User`s Manual
Contents
1. time length for video recorded is 20 minutes 1 Press Press button to start recording a sound after the blue lamp flashes 3 times and turns off it will be put into the working order Press again it will save the sound file and return to the holding state and the blue lamp will be on the default time length for sound recorded is 20 minutes Press button to get in photo taking mode It will take a photo if pressing this button again When pressing this button the blue lamp will flash after taking the photo it will return to the stand by Press button to get in motion detection mode then the blue lamp will flash quickly If a moving object is detected the blue lamp will flash slowly by two times and the device will be start to record video If there is no moving object to be detected the blue lamp will return to Quick flash and get in motion detection mode the default length for the video file is 3 minutes Press button it will turn the device off and the blue lamp will be off When the switch is ON insert the USB cable and then press button on the remote controller the device will access to the U disc mode PC camera function Please install the driver software which is saved in the Compact Disc before operating Turn on the device by pressing on the remote controller when the device is under the mode of ON insert USB cable to connect the computer at this time it will access to PC CAM mode Cha2. SafestHelp Alarm Clock User s Manual Preface This Instruction will guide you how to use the product Meanwhile it provides the necessary information related to the product such as the information for operating and handling You are recommended to read the Instruction carefully and understand all contents herein before operating Please keep the Instruction carefully We hope this product satisfied with your demand and sever you better Product Assurance This product is with FCC and CE certificate and had inspected by the authorized organizations where was found to comply with the recommended indexes User is under our safety assurance when operating this product Instruction For Use for Time signal Clock l Basic functions 1 5 buttons HR MIN SET LIGHT TALK SNZ 2 The time amp minute can be displayed in a 3 5 bit LCD panel Time showing system of 12 hours and 24 hours is available 3 Multiple rings for choice Beep cock etc 5 melodies for option 4 The time alarm will be triggered every 10 minutes if the clock is on the snooze function It can alarm 6 times maximally 5 Two on the hour alarm functions for choice 6 The ring of Beep will be become louder generally And it will last 1 minute 7 If adopting the melody as the ring the clock will alarm when the melody ends Il Function operation 1 When switching the power on the whole LCD will display after the ring of a melody ends the clock will di
3. WIN 2000 XP Visat32 7 Charging time 1GB 40 minutes About 4 hours Time consumed of storage Troubleshooting Trouble Troubleshooting Can not turn on Remove the insulator lock of Power please charge accordingly Battery is not contact well re start Can not charge the electricity Replace the battery or adapter Blue light flashes rapidly re start camera low power charging reminder delete redundant files from the card put in TF Card or replacing TF Card Remote controller is hard to use Cannot connect with computer Align with the receiver s head remove the insulator of remote controller replace battery or wait for reading the card Replace the data cable or computer Clock s screen flashes or character is displayed incompletely Charging Sound is recorded with noise or video is not clear Other problems Charging replace TF card Please contact local seller Power Source This product can only be allowed to comply the authorized power sources with the following marks i e CE CE mark UN Power Certification UL mark American Power Certification CCC mark Chinese Power Certification Y G gt BS mark British Power Certification C TICK mark Australian Power Certification GS mark German Power Certification PSE mark Japanese Power Certification Note The power device will get a rising tempera
4. ake a photo Il Product Introduction This product is a high resolution 30 frame 640X480 1280 960 remote video surveillance clock with an external TF Card As a multifunctional high tech product the product is available multiple functions such as video sound recording induction video take a photo cyber chat electric alarm clock and file storage with the high capacity battery it can last recording for about 12 hours continuously and audio recording for 25 hours continuously besides the product can replace the high resolution video with 2 million pixels sound and file automatically Meanwhile the product is designed the multiple languages for telling the time It supports 32GB storage Its TF card can be used for a long time and remote controller can be easy to handle With the best imperceptibility this product will be as your ideal assistant to prevent theft and get evidence lll Handling Instructions 1 2 10 11 12 13 14 15 Open the rotational cover at the right side insert the TF card and turn ON to get ready Use the remote controller to aim to the receiver of the clock and press to start When the blue lamp is on and the clock is under the stand by mode to start recording video After the blue lamp flashes 3 times and then turns off it start recording stop pressing 3 it will save the video file and return to the holding state and the blue lamp will be on the default
5. rging Place the chief switch to OFF position insert USB adapter and the red lamp will be on When it is full the red lamp will be off You can charge it too by connect this device to a computer A Please use only the adapter provided with the device together if the device getting hot or occurs other unexpected situations whilst charging please disconnect the adapter s power source Reset If the product stops working under illegal operation or other unclear reasons please place the switch of the device to OFF position and then to ON position It will reset the product accordingly When the battery is low capacity the blue lamp will keep flashing or the screen display will be unclear Then please charge it immediately If it is used off the file will be saved automatically Recorder date Run the writertime file in CD disc when the camera connect with computer And then the video time is the same computer File update please install Network Installer from the installation disc use the remote controller to open the clock and then insert the USB cable in 10 seconds afterwards the computer will open an interface automatically click Program Upgrade it will open a dialogue box afterwards click Update When DRAM Timing select 0X35 When DRAM Size select 8M afterwards press OK to upgrade several minutes later press Confirm button When the program is lost please install
6. splay time 2 Press Set button under the Time mode to set as per the following sequences the display will flash simultaneously Time setting Alarm setting On the hour alarm setting 3 Press HR button under the Time Setting mode to set hour and MIN button to set minute 4 Press HR button under the Alarm Setting mode Symbol to set hour and MIN button to set minute Press SNZ button when alarming the clock will re alarm every 10 minutes and will send alarm by 6 times at most 5 Under the On the hour Alarm Setting mode the symbol of alarm and the on the hour alarm will flash It will open and close the function Symbol by pressing the HR button but send alarm during the time from 7 00am to 9 00pm Symbol it can activate the inactivate the alarm ring by pressing MIN button Symbol 6 Under the Time Mode and if the HR button is pressed it can shift the hour system 12 24 hour system by pressing MIN button it can select the alarm ring 7 Under any modes it can turn the background light off by pressing the LIGHT button 8 Under any modes it can report the time by pressing the TALK button DV Using Instruction I Structure Diagram 1 Alarm Clock Time telling button Rotational cover Liens USB fo Pa 2 Remote controller seer Switch button a Ja motion detection video Sound recording T
7. tal humidity suitable for living keep the device faraway from the wet environment This device is not designed the water proof function Video luminance Please use the device when the sufficient luminance is available it is prohibited to use the lens to aim to the sun or other intensive light source otherwise it may damage the optical apparatus Cleanliness requirement Please do not use the device in the environment full of dirt otherwise it may cause the lens or other parts to attach with dirt and influence video effect It can use the lens wiping paper or glass cloth to clean Other precautions This device is a precision electronic product please keep it away intensive impact shock intense magnetic field or electric field V Relevant Parameters Pixel 2 0 maga pixel Resolution 640 480 1280 960 Video format AVI Frame number 30fps Vision angle 72 Induction photographing 6 meters for Straight line distance Minimal illumination 1LUX Battery capacity 2200MA Continuous recording time Over 12 hours Remote operating distance 15m Scope for sound recording 40m Power consumption 130MA 3 7V Storage temperature 20 80 C working temperature 10 60 C working humidity 15 85 RH Type of memory card Mini SD card Capacity of memory card 32GB maximally Player software Media player KM player USB Interface USB1 1 2 0 Operating system
8. the software which is saved in the Compact Disc and then click STKO2NU Programme Upgrading Tool afterwards click Update Under DRAM Timing select 0X35 Under DRAM Size select 8M afterwards press OK to upgrade several minutes later press Confirm button IV File s storage and play When finishing video recording and other operations please place the switch to ON position connect it to your computer by USB cable and press on the remote controller copy the file or cut and paste it to the your computer to play or you can remove the TF card and use the card reader to read the data inside The Media player KM player is recommended USB port of USB data cable computer V Precautions Application conditions Please abide by the related national laws and regulations strictly it is prohibited to use the product for illegal purpose otherwise you must be responsible for the consequences Software upgrade In order to keep the device available a better performance the manufacturer shall improve the product software continuously The device is designed the function to update by user itself please claim the latest software and upgrading method towards your local dealer Working temperature Please use the device only at the natural temperature never use the device at the temperature that human body feels unconformable Working humidity Please use the device only in the environmen
9. ture on the surface when operating This is an expected phenomenon If it is a must to bring the power device with you please remove it from the power socket Necessary Fittings a en Compact Disc Switching power supply we a4 ts i USB Data Cable Instruction For Use Thank you for reading SafestHelp
Download Pdf Manuals
Related Search