User Manual
Contents
1. F Admin Password purposely not displayed for security protection Home NPA J Layer 3 QoS 48 Diff Serv or Precedence value Layer 2 QoS 802 10Q VLAN Tag 0 802 1p priority value 0 0 7 STUN server is oe Juri or IP port keep alive interval 20 in seconds default 20 seconds Upgrade Via TFTP HTTP Firmware Server Path 192 168 0 169 Config Server Path 192 168 0 169 Firmware Upgrade Firmware File Prefix Firmware File Postfix Config File Prefix Config File Postfix and Provisioning Automatic Upgrade O No Yes check for upgrade every 7 minutes default 7 days Always Check for New Firmware L Check New Firmware only when F W pre suffix changes NTP Server time gist gov URI or IP address Lock Keypad Update No Oes configuration update via keypad is disabled if set to Yes Disable Voice Prompt No O Yes voice promptis disabled if set to Yes Syslog Server SUPER OPTIONS Setting options Meaning This contains the password to access the Advanced Web Configuration page This field is case sensitive Only the administrator can configure the Advanced Settings page Password field is purposely left blank for security reasons after clicking update and saved The maximum password length is 26 characters only digit or letter Admin Password This field defines the layer 3 QoS parameter which can be Layer 3 QoS the value used2. for all subsequent calls 70 Disable Call Waiting Per Call 71 Enable Call Waiting Per Call 72 Unconditional Call Forward To use this feature dial 72 and get the dial tone Then dial the forward number and for a dial tone then hang up 73 Cancel Unconditional Call Forward To cancel Unconditional Call Forward dial 73 and get the dial tone then hang up 90 Busy Call Forward To use this feature dial 90 and get the dial tone Then dial the forward number and for a dial tone then hang up 91 Cancel Busy Call Forward To cancel Busy Call Forward dial 91 and get the dial tone then hang up 92 Delayed Call Forward To use this feature dial 92 and get the dial tone Dial the forward number and for a dial tone and then hang up 93 Cancel Delayed Call Forward To cancel this feature dial 93 get the dial tone and then hang up Flash Hook call waiting indication When in conversation without an incoming call this action will switch to a new channel to make a new call 5 4 Status Light Indicator Following tables show the Unicorn 3001 button light pattern indication Indicates Power Remains ON when power is connected Copyright 2008 Hanlong Technology Co Ltd Page 10 of 26 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3001 http ar
3. DNS Server 1 DNS Server 2 Allow DHCP Option 2 to override Time Zone setting No Yes No Yes if setto Yes display time will be 1 hour ahead of normal time SCuLW COCE A ae TE TEL Time Zone Daylight Savings Time BASIC OPTIONS Setting Setting options meaning Web Port The default is 80 all the field values for the Static IP mode are not used even though they are still saved in the Flash memory set the PPPoE account settings The Unicorn 3001 will establish a PPPoE session if any of the PPPoE fields is IP Address set configure the IP address Subnet Mask Default Router IP address DNS Server 1 primary DNS Server 2 secondary fields These fields are set to zero by default Copyright 2008 Hanlong Technology Co Ltd Page 13 of 26 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3001 http arttel ru Ez HAMLONG TECHNOLOGY NOLO Unicorn 3001 User Manual Time Zone This parameter controls how the displayed date time will be adjusted according to the specified time zone Daylight Savings Time This parameter controls whether the displayed time will be daylight savings time or not If set to Yes then the displayed time will be 1 hour ahead of normal time Date Display Format Device Mode LAN Subnet Mask LAN DHCP Base IP DHCP IP Lease Time DMZIP Port Map End User Password Reply to ICMP on WAN port WAN sid
4. Dial Proxy Require Use NAT IP Disable Call Waiting No Key Entry Timeout Preferred Vocoder in listed order Voice Frames per TX Unicorn 3001 User Manual ONo yYes One yYes no No Yes Flash willbe sentas a DTMF event if setto Yes ONo Yes ifYes call features using star codes will be supported locally User D extension to dial automatically when offhook used in SIP SDP message if specified ONo OYes in seconds defaultis 4 seconds choice 1 current setting is PCMU choice 2 current setting is G 726 32 v choice 3 current setting is G 723 1 v choice 4 current setting is PCMA v choice 5 current setting is G 728 v Choice 6 current setting is G 729A B up to 10 20 32 64 for G7 11 G726 G723 other codecs respectively G723 rate 6 3kbps encoding rate 5 3kbps encoding rate iLBC frame size 20ms 30ms iLBC payload type 97 between 96 and 127 default is 97 6726 16 Payload Type 100 between 96 and 127 defaultis 100 pies Payload Type 99 between 96 and 127 defaultis 99 FXS PORT Setting options Meaning DTMF in Audio Default is YES DTMF via RFC2833 Default YES DTMF via SIP INFO Default is NO Send Flash Event This parameter allows users to control whether to send an SIP NOTIFY message indicating the Flash event or just to switch to the voice channel when users press the Flash key Enable Call Features Default is No If
5. Input the admin password to enter the configuration screen From there enter the TFTP server address in the designated field towards the bottom of the configuration screen Once the TFTP server is configured please power cycle the Unicorn 3001 TFTP process may take as long as 1 to 2 minutes over the Internet For those who do not have a local TFTP server Hanlong provides a NAT friendly TFTP server on the public Internet for firmware upgrade Please check the Service section of Hanlong s Web site to obtain this TFTP server s IP address Copyright 2008 Hanlong Technology Co Ltd Page 25 of 26 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3001 http arttel ru Ez HANLONG Unicorn 3001 User Manual NOTES When Hanlong ATA boot up it will send TFTP or HTTP request to download configuration files there are two configuration files one is cfg txt and the other is cfg001fc1xxxxxx where 001fc1xxxxxx is the MAC address of the Unicorn 3001 These two files are for initial automatically provisioning purpose only for normal TFTP or HTTP firmware upgrade the following error messages in a TFTP or HTTP server log can be ignored 8 RESTORE FACTORY DEFAULT SETTINGS Warning Restoring to the factory default settings will delete all configuration information of the device Steps to follow in restoring to factory default settings a Press for voice prompt b Enter 99 and then you
6. accessed via the WAN port Copyright 2008 Hanlong Technology Co Ltd Page 11 of 26 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3001 http arttel ru HANLONG Unicorn 3001 User Manual http Unicorn 3001 s IP Address Be sure that your PC is connected to the router hub switch directly 6 1 2 User Programming and Configuration From your web browser the Unicorn 3001 will show the following login screen Hanlong VOIP Device Configuration Password Si 2 All Rights Reserved Hanlong Technology CO LTD 2005 2008 Enter the password and click on the Login button 6 1 3 Passwords Passwords are case sensitive and all Unicorn devices come with factory default passwords as indicated below Advanced User Password for access to Super User Options admin End User Password for access to Basic User Options 1234 6 1 4 Configuration Options and Explanations After a correct password is entered in the login screen the embedded web server inside the Unicorn 3001 will show the configuration page which is explained in details below 6 1 4 1 Device Status DEVICE STATUS Setting Options Meaning MAC Address The device ID n HEX format This is a very important ID for ISP troubleshooting There are 2 modes under which the Unicorn 3001 can operate If DHCP mode is enabled then all the field values for the Static IP mode are not used even though they are still saved WAN IP Address in the chi
7. been saved Please allow 5 to 10 seconds before rebooting the device Ring Tone 9 c 2000 4000 Ring Tone 10 c 2000 4000 6 1 6 Rebooting the Unicorn 3001 You can reboot the Unicorn 3001 by clicking on the Reboot button after each update to the configuration page Alternatively you can reboot by unplugging the power supply of the Unicorn 3001 and then powering it on again If your Unicorn 3001 ever becomes stuck or un responsive you can unplug the power supply to reboot it Frequent rebooting by unplugging the power supply is not recommended and should not be necessary 6 2 Configuring Unicorn 3001 via Voice Prompt 6 2 1 DHCP Mode Follow section 5 1 with voice menu option 01 to enable Unicorn 3001 to use DHCP Copyright 2008 Hanlong Technology Co Ltd Page 24 of 26 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3001 http arttel ru Ez HANLONG Unicorn 3001 User Manual 6 2 2 Static IP Mode Follow section 5 1 with voice menu option 01 to enable Unicorn 3001 to use STATIC IP mode then use option 02 03 04 to set up Unicorn 3001 s IP Subnet Mask Gateway respectively 6 2 3 Configuration through a Central Server Unicorn 3001 devices can be automatically configured from a central provisioning system When Unicorn 3001 boots up it will send TFTP or HTTP request to download configuration files There are two configuration files one is cfg txt and the other is cfg001fc1
8. for IP Precedence or Diff Serv or MPLS Default value is 48 This contains the value used for layer 2 VLAN tag Default aa Ss setting is blank STUN server IP address or domain name of stun server This parameter specifies how often the Unicorn 3001 keep alive interval sends a blank UDP packet to the SIP server in order to keep the hole on the NAT open Firmware Upgrade M Upgrade though TFTP or FTTP server and Provisioning pa 5 This parameter defines the URI or IP address of the NTP NTP Server server which is used by the Unicorn 3001 to display the current date time Lock Keypad Update If this parameter is set to Yes the configuration Copyright 2008 Hanlong Technology Co Ltd Page 15 of 26 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3001 http arttel ru EZ HANLONG TECHNOLOGY Unicorn 3001 User Manual update via keypad is disabled Disable Voice Prompt Default is NO Syslog Server Default is blank the feature is useful for the Internet Telephone Service Provider Syslog Level NONE Download Device Configuration Call Progress Tones Restore Configuration Restore License Syntax f1 freq vol f2 freq vol c on1 off1 on2 off2 0n3 off3 Note freq 0 4000Hz vol 30 0dBm Dial Tone f1 350 13 f2 440 13 c 0 0 Ringback Tone f1 440 19 f2 480 19 c 2000 4000 Busy Tone f1 480 24 f2 620 24 c 500 5
9. port forwarding or DMZ Unicorn2101 supports two ways to make Direct IP Calling Using IVR 1 Pick up the analog phone then access the voice menu prompt by dial 2 Dial 47 to access the direct IP call menu 3 Enter the IP address using format ex 192 168 0 160 after the dial tone Using Star Code 1 Pick up the analog phone then dial 47 2 Enter the target IP address using same format as above Note NO dial tone will be played between step 1 and 2 Destination ports can be specified by using encoding for followed by the port number Examples a If the target IP address is 192 168 0 160 the dialing convention is 47 or Voice Prompt with option 47 then 192 168 0 160 followed by pressing the key if it is configured as a send key or wait 4 seconds In this case the default destination port 5060 is used if no port is specified b If the target IP address port is 192 168 1 20 5062 then the dialing convention would be 47 or Voice Prompt with option 47 then 192 168 0 160 5062 followed by pressing the key if it is configured as a send key or wait for 4 seconds NOTE When completing direct IP call the Use Random Port should set to NO 5 2 3 Blind Transfer Assuming that call party A and party B are talking to each other on the phone Party A wants to transfer party B to party C Copyright 2008 Hanlong Technology Co Ltd Page 8 of 26 http arttel ru shop
10. to ensure superb audio quality advanced adaptive jitter control and packet loss concealment technology gt Support various vocoders including G 711 a law and u law G 723 1 5 3K 6 3K optional G 726 40K 32K 24K 16K optional as well as G 729A B gt Support Caller ID Name display or block Hold Call Waiting Flash Call Transfer Call Forward in band and out of band DTMF Dial Plans etc gt Support fax pass through and T 38 gt Support Silence Suppression VAD Voice Activity Detection CNG Comfort Noise gt Generation Line Echo Cancellation G 168 and AGC Automatic Gain Control gt Support standard encryption and authentication DIGEST using MD5 and MD5 sess Copyright 2008 Hanlong Technology Co Ltd Page 3 of 26 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3001 http arttel ru Ez HANLONG Unicorn 3001 User Manual gt Support for Layer 2 802 1Q VLAN 802 1p and Layer 3 QoS ToS DiffServ MPLS gt Support automated NAT traversal without manual manipulation of firewall NAT and STUN UPNP gt Support device configuration via built in IVR Web browser or central configuration file through TFTP or HTTP gt Support firmware upgrade via TFTP or HTTP with encrypted configuration files gt Support volume amplification gt Support configurable Call Progress Tones gt Ultra compact wallet size and lightweight design great companion for travelers gt Compact lightw
11. voip shlyuzy golosovoj shlyuz hanlong unicorn 3001 http arttel ru Ez HANLONG Unicorn 3001 User Manual gt Party A presses FLASH on the analog phone or Hook Flash for old model phones to get a dial tone gt Then party A dials 87 then dials party C s number and then or wait for 4 seconds Party A can hangs up the phone gt Note Call features have to be activated during web configuration by selecting YES to Enable Call Features These features need to be supported by your SIP gatekeeper proxy server in order to work gt Party A can hold on to the phone and wait for one of the three following events 1 A quick confirmation tone temporarily using the call waiting indication tone followed by a dial tone This indicates the transfer is successful transferee has received a 200 OK signal from transfer target At this point party A can either hang up or make another call 2 Aquick busy tone followed by a restored call on supported SIP gatekeeper platforms only This means the transferee has received a 4xx response signal for the INVITE and will try to recover the call The busy tone is just to indicate to the transferor that the transfer has failed 3 Busy tone keeps playing This means the Unicorn 3001 has failed to receive the second NOTIFY signal from the transferee and decided to time out Note this does not indicate the transfer has been successful nor does it indicate the transfer has failed When t
12. will hear the voice prompt Reset c Enter the number 862584658050 A click sound will be heard d Wait for 15 seconds 9 TECHNICAL SUPPORT CONTACT Email Support mail hanlongtek com Copyright 2008 Hanlong Technology Co Ltd Page 26 of 26 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3001
13. 0 Ring Tone 6 c 2000 4000 Ring Tone 7 c 2000 4000 Ring Tone 8 c 2000 4000 Ring Tone 9 c 2000 4000 Ring Tone 10 c 2000 4000 All Rights Reserved Hanlong Technology CO LTD 2005 2008 Option Meaning Send Anonymous If this parameter is set to Yes the From header in outgoing INVITE message will be set to anonymous essentially blocking the Caller ID from displaying Anonymous Call Rejection Default is NO if set to YES the anonymous call will be rejected with busy message Session Expiration Default is 180 seconds Min SE Default is 90 seconds Caller Request Timer Default is NO Callee Request Timer Default is NO Force Timer Default is NO UAC Specify Refresher Default is Omit UAS Specify Refresher Default is UAC Force INVITE Default is NO Special Feature Default is standard FXS impedance Select the impedance of analog telephone connected to phone port Caller ID Scheme select caller ID to suit standard of different area Onhook Voltage Select onhook voltage to suit standard of different area Polarity Reversal Default is NO Hook Flash Timing Time period when the cradle is pressed Hook Flash to simulate FLASH To prevent unwanted activation of the Flash Hold and automatic phone ring back adjust this time value Volume Amplification Voice path volume adjustment Rx is aga
14. 00 Reorder Tone f1 480 24 f2 620 24 c 250 250 Confirmation Tone f1 350 11 f2 440 11 c 100 100 100 100 100 100 Call Waiting Tone f1 440 13 c 300 10000 300 10000 0 0 Default Ring f1 440 13 f2 480 13 c 2000 4000 Caspara Only the cadence is configurable Syntax c on 1 0ff1 on2 0ff2 on3 off3 1 AA Restore Configuration BIG Restore License All Rights Reserved Hanlong Technology CO_ LTD 2005 2008 Setting options Syslog Level SUPER OPTIONS Meaning Default is blank the feature is useful for the Internet Telephone Service Provider Download Device Configuration User can download configuration from the web page and save to configuration file Call Progress Tones Using these settings users can configure tone frequencies and cadence according to their preference By default they are set to North American frequencies Configure these settings with known values to avoid uncomfortable high pitch sounds ON is the period of ringing On time in ms while OFF is the period of silence In order to set a continuous tone OFF should be zero Otherwise it will ing ON ms and a pause of OFF ms and then repeat the pattern Example configuration for N A Dialtone f1 350 13 f2 440 13 c 0 0 Syntax f1 freq vol f2 freq vol c on1 off1 on2 off2 on3 off3 Note freq 0 4000Hz vol 30 OdBm Restore Configuration User can restore the before configuration from t
15. Dial Key This parameter allows users to configure the key to be used as the Send or Dial key If set to Yes pressing this key will immediately trigger the sending of dialed string collected so far In this case this key is essentially equivalent to the Re Dial key If set to No this key will then be included as part of the dial string to be sent out Dial Plan Dial Plan Rules 1 Accept Digits 1 2 3 4 5 6 7 8 9 0 A a B b C c D d 2 Grammar x any digit from 0 9 a xx at least 2 digits number b xx at least 2 digits number c exclude d 3 5 any digit of 3 4 or 5 e 147 any digit 1 4 or 7 f lt 2 011 gt replace digit 2 with 011 when dialing Example 1 369 11 1617xxxxxxx Allow 311 611 911 and any 10 digit numbers of leading digits 1617 Example 2 1900x lt 1617 gt xxxxxxx Block any number of leading digits 1900 and add prefix 1617 for any dialed 7 digit numbers Example 3 1xxx 2 9 xxxxxx lt 2 011 gt x Allow any length of number with leading digit 2 and 10 digit numbers of leading digit 1 and leading exchange number between 2 and 9 if leading digit is 2 replace leading digit 2 with 011 before dialing 3 Default Outgoing x Example of a simple dial plan used in a Home Office in the US 1900x lt 1617 gt 2 9 xxxxxx 1 2 9 xx 2 9 xxxxxx Copyright 2008 Hanlong Technology Co Ltd Page 21 of 26 http arttel ru s
16. arious safety standards including FCC CE and C Tick Its power adaptor is compliant with UL standard The Unicorn 3001 should only operate with the universal power adaptor provided in the package Warning Please do not use a different power adapter Using other power adapter may damage the Unicorn 3001 and will void the manufacturer warranty Caution Changes or modifications to this product not expressly approved by Hanlong Technology or operation of this product in any way other than as detailed by this User Manual could void your manufacturer warranty Information in this document is subject to change without notice No part of this document may be reproduced or transmitted in any form or by any means electronic or mechanical Copyright 2008 Hanlong Technology Co Ltd Page 5 of 26 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3001 http arttel ru Ez HAMNMLONG TECHNOLOGY Unicorn 3001 User Manual for any purpose without the express written permission of Hanlong Technology 5 5 1 BASIC OPERATIONS Get Familiar with Voice Unicorn 3001 has stored a voice prompt menu for quick access to settings and simple configuration You can enter this voice prompt menu one ways gt Pick up the receiver or press the Handsfree button of the analog telephone and press tkk kI A voice will say Enter the new option At this point you can select from the following menu voice prompt options to
17. ation through a Central Server 25 7 SOFTWARE UPGRADE wisisissciciacsiaceiiscisdedisccaisieinteiaceiasacanccsicnaneneiaceancticasiantsasneeseeens 25 8 RESTORE FACTORY DEFAULT SE INGS ssnseussunsenrennnnnnunnunnnnnnunnnnnennennnnnnnn 26 9 TECHNICAL SUPPORT CONTACT wesicssisisesicssnsstnssensatncssnnssanscnnssniassensanecssasntenstaaanan 26 1 WELCOME Unicorn 3001 is an all in one VoIP integrated access device that features superb audio Copyright 2008 Hanlong Technology Co Ltd Page 2 of 26 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3001 http arttel ru Ez HANLONG Unicorn 3001 User Manual quality rich functionalities high level of integration compactness and ultra affordability The Unicorn 3001 is fully compatible with SIP industry standard and can interoperate with many other SIP compliant devices and software on the market gt Special compatibility features include gt Nortel MCS gt Standard SIP gt Broadsoft gt Howdy 2 WHAT IS IN THE PACKAGE The Unicorn 3001 package contains gt One Unicorn 3001 VoIP adapter gt One universal power supply gt One Ethernet cable 3 PRODUCT OVERVIEW 3 1 Key Features gt Supports SIP 2 0 RFC 3261 TCP UDP IP RTP RTCP HTTP ICMP ARP RARP DNS DHCP both client and server NTP PPPoE STUN TFTP etc gt Supports call origination and termination from to the PSTN network gt Powerful digital signal processing DSP
18. begin using the Unicorn 3001 Main Menu Enter a Menu Option Menu Voice Will Say the Following Enter for the next menu option Enter to return to the main menu Enter 01 07 12 17 47 86 or 99 Menu option 01 DHCP Mode Static IP Mode Enter 9 to toggle the selection If user selects Static IP Mode user need configure all the IP address information through menu 02 to 05 If user selects Dynamic IP Mode the device will retrieve all IP address information from DHCP server automatically when user reboots the device 02 IP Address IP address The current WAN IP address is announced Enter 12 digit new IP address if in Static IP Mode 03 Subnet IP address Same as Menu option 02 04 Gateway IP address Same as Menu option 02 05 DNS Server IP address Same as Menu option 02 06 MAC Address Announces the Mac address of the unit 07 Preferred Vocoder Enter 9 to go to the next selection in the list PCM U PCM A G 726 G 723 G 729 VV VV V Copyright 2008 Hanlong Technology Co Ltd Page 6 of 26 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3001 http arttel ru EZ HANLONG TECHNOLOGY Unicorn 3001 User Manual 12 WAN Port Web Access Enter 9 to toggle between enable a
19. bout 45 days Outgoing Call without Registration Default is No If set to Yes user can place outgoing calls even when not registered if allowed by ITSP but is unable to receive incoming calls Local SIP port This parameter defines the local SIP port the Unicorn 3001 will listen and transmit The default value for FXS port is 5060 Local RTP port This parameter defines the local RTP RTCP port pair the Unicorn 3001 will listen and transmit It is the base RTP port for channel 0 When configured channel 0 will use this port _value for RTP and the port_value 1 for its RTCP channel 1 will use port_value 2 for RTP and port_value 3 for its RTCP The default value for FXS port is 5004 Use random port This parameter when set to YES will force random generation of both the local SIP and RTP ports This is usually necessary when multiple Unicorn 3001 are behind the same NAT Refer To Use Target Contact Default is NO If set to YES then for Attended Transfer the Refer To header uses the transferred target s Contact header information DTMF Payload Type Sets the payload type for DTMF using RFC2833 Copyright 2008 Hanlong Technology Co Ltd Page 18 of 26 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3001 http arttel ru HAMLONG TECHNOLOGY DTMF in Audio DTMF via RFC2833 DTMF via SIP INFO Send Flash Event Enable Call Features Offhook Auto
20. e http access PSTN access code Year Month Day O Month Day Year Day Month Year ONAT Router Bridge 255 255 255 0 Default is 255 255 255 0 192 168 2 1 Base IP for the LAN port default is 192 168 2 1 24 Hours Default is 120 hours or 5 days WAN Port 0 LAN IP LAN Port 0 Protocol UDP bd WAN Port 0 LAN IP LAN Port 0 Protocol UDP v WAN Port 0 LAN IF LAN Port 0 Protocol UDP v WAN Port 0 LAN IP LAN Port Protocol UDP v WAN Port 0 LAN IF LAN Port 0 Protocol UDP Sr WAN Port 0 LAN IP LAN Port 0 Protocol UDP s WAN Port 0 LANIP LAN Port 0 Protocol UDP v WAN Port 0 LAN IP LAN Port 0 Protocol UDP v Basic user password to configure this device O No Yes Unitwill not respond to PING from WAN side if set to No O No Yes WAN side access to http server will be rejected if set to No 00 key pattern to use PSTN line default is 00 Saveset Reboot BASIC OPTIONS SETTINGS Setting Options Meaning Date Display Format Allow user to choose among the following three formats Year Month Day Month Day Year Day Month Year End User Password This contains the password to access the Web Configuration Menu This field is case sensitive Copyright 2008 Hanlong Technology Co Ltd Page 14 of 26 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3001 http arttel ru HANLONG Unicorn 3001 User Manual Super Options Setting
21. eight Universal Power adapter 3 2 Hardware specification WAN interface 1 x RJ45 100MBase T FXS telephone port 1x FXS LED light Green and red color Input 100 240VAC 50 60 Hz Universal switching power supply Output 9VDC 600mA CE certification Dimension 70mm W 130mm D x 27mm H Weight 0 35kg 40 130 F Temperature 5 45C Humidity 10 90 4 INSTALLATIONS The Unicorn 3001 is an all in one VoIP integrated device designed to be a total solution for networks providing VoIP services The Unicorn 3001 VoIP features are available when you connect any regular analog telephone to it Unicorn 3001 has one FXS port labeled Phone The following photo illustrates the Interconnection Diagram of the of a Unicorn 3001 Copyright 2008 Hanlong Technology Co Ltd Page 4 of 26 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3001 http arttel ru HANLONG Unicorn 3001 User Manual Internet Network Analog Phone FXS Following are the steps to install a Unicorn 3001 gt Connect a standard touch tone analog telephone to the Phone port gt Insert Ethernet cable into the WAN port of Unicorn 3001 and connect the other end of the Ethernet cable to an uplink port a router switch hub modem etc gt Insert the powers supply included with package into the Unicorn 3001 and connect it to a power outlet 4 1 Safety The Unicorn 3001 is compliant with v
22. he configuration file saved at local pc Copyright 2008 Hanlong Technology Co Ltd Page 16 of 26 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3001 http arttel ru HAMLONG TECHNOLOGY Unicorn 3001 User Manual FXS Port Account Active Ono yes SIP Server home xanadu hanlongtec cn e g sip mycompany com or IP address Outbound Proxy 1 192 168 0 7 e g proxy myprovider com or IP address if any NAT Traversal ONo No butsendkeep alive CSTUN OUPNP SIP User ID 86008 the user part of an SIP address Authenticate ID 86008 can be identical to or different from SIP User ID Authenticate Password purposely not displayed for securityprotection Name nico optional e g John Doe Use DNS SRV Ono Oves User ID is phone number No OvYes SIP Registration Ono Oves Unregister On Reboot No OYes Register Expiration 2 in minutes default 1 hour max 45 days Outgoing Call without Registration No Ores local SIP port 115060 default 5060 local RTP port 1 5004 1024 65535 default 5004 Use random port Ono Oves Refer To Use Target Contact No OvyYes DTMF Payload Type 101 Setting options Meaning Account Active Set to the YES the account can be available SIP Server SIP Server s URI or IP add
23. hop voip shlyuzy golosovoj shlyuz hanlong unicorn 3001 http arttel ru HAMNMLONG ae FECHNOLO Unicorn 3001 User Manual 011 2 9 x 3469 11 Explanation of example rule reading from left to right 41900x prevents dialing any number started with 1900 lt 1617 gt 2 9 xxxxxx allows dialing to local area code 617 numbers by dialing 7 numbers and 1617 area code will be added automatically 1 2 9 xx 2 9 xxxxxx allows dialing to any US Canada Number with 11 digits length 011 2 9 x allows international calls starting with 011 3469 11 allow dialing special and emergency numbers 311 411 611 and 911 Note In some cases user wishes to dial strings such as 123 to activate voice mail or other application provided by service provider In this case should be predefined inside dial plan feature and the Dial Plan should be l SUBSCRIBE for MWI Default is No When set to Yes a SUBSCRIBE for Message Waiting Indication will be sent periodically 600 Ohm North America vii Bellcore Noth America Fa v v Copyright 2008 Hanlong Technology Co Ltd Page 22 of 26 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3001 HAMLONG TECHNOLOGY Unicorn 3001 User Manual Ring Tones Syntax c on1 off1 on2 off2 on3 off3 Ring Tone 1 c 2000 4000 Ring Tone 2 c 2000 4000 Ring Tone 3 c 2000 4000 Ring Tone 4 c 2000 4000 Ring Tone 5 c 2000 400
24. http arttel ru User Manual Unicorn 3001 Analog Telephone Adaptor Hanlong Technology Co Ltd http www hanlongtek com Copyright 2008 Hanlong Technology Co Ltd Page 1 of 26 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3001 http arttel ru HANLONG Unicorn 3001 User Manual Table of Content TW WELCOME oe sccsssscccsacstsccnisccsessesssenseinesdesssenscnaesuanssensanacsensusessensessdaataanasnaataassaausacassasuas 2 2 WHAT IS IN THE PACKAGE oie siisciiscisictiicscictaicsictaicnccatacaicactaccincekaantanciaaciaaedtiatedaeemanes 3 3 PRODUCT OVERVIEW sscceiscsitssiesscesesedstesssevscniesesesenudersdarsdesedscniesriussdecavecavedetantncssssuas 3 3 1 ING CAUUGS 2c2cice ie res Fees eee ees cee ee ee fede eee eee ec ae ede ec eee aes cae 3 3 2 Hardware SPeCifiCation c eecceeeeceeeseeeeeneeeeeeeeeeeeeesaeeseaeeeseaeeessaeessneeessaeeeas 4 4 INSTALLATIONS sssicsasicsscscnssnacacecassaccaienatanesacecenasnsaienncanndanenasaceasenecaesantadueanaieceasenasines 4 4 1 Sei E E 5 5 BASIC OPERATIONS tiisicsiissscicaceienuimuancenncanvonunwnniccmenmunnennenaennunnceneumneneerneenennunenemianua 6 5 1 Get Familiar with Voice ica ceet cece ad cdernsc met na sdenetanetenatnecenet mctenetontenetanceatetecees 6 5 2 Make Phone Call isisisi enn nd ie 7 5 2 1 Calling Phone or Extension Numbers eeeceesseeseeeeeeeeeeeeseeteeeeeseeens 7 5 2 2 EU A ec eee 8 52 37 Blind TANS teas cisccteresct cere eevee o
25. in level for signals transmitted by FXS Tx is a gain level for signals received by FXS Default OdB for both parameters Loudest volume 6dB Lowest volume 6dB User can adjust volume of call on either end using the Rx Gain Level parameter and the Tx Gain Level parameter Copyright 2008 Hanlong Technology Co Ltd Page 23 of 26 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3001 http arttel ru HANLONG Unicorn 3001 User Manual located on the FXS Port Configuration page If call volume is too low when using the FXS port ie the ATA is at user site adjust volume using the Rx Gain Level parameter under the FXS Port Configuration page If voice volume is too low at the other end user may increase the far end volume using the Tx Gain Level parameter under the FXS Port Configuration page This function lets you configure ring tone cadence preferences User has 10 choices Ring Tones The configuration completed in Distinctive Ring Tones block in the same page applies to ring tones cadences configured here 6 1 5 Saving the Configuration Changes Once a change is made users should click on the SaveSet button in the Configuration page as follow Ring Tone 9 c 2000 4000 Ring Tone 10 c 2000 4000 ED Retox AB Rights Reserved Hanlong Technology CO LTD 2005 2008 The Unicorn 3001 will then display the following screen to confirm that the changes have
26. is 102 range is from 96 to 127 VAD Default is No VAD allows detecting the absence of audio and conserve bandwidth by preventing the transmission of silent packets over the network Symmetric RTP Default is No When set to Yes the device will change the destination to send RTP packets to the source IP address and port of the inbound RTP packet last received by the device Fax Mode Default is T 30 Copyright 2008 Hanlong Technology Co Ltd Page 20 of 26 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3001 http arttel ru Ez HAMNMLONG TECHNOLOGY Unicorn 3001 User Manual Fax Tone Detection Mode Default is Callee This decides whether Caller or Callee sends out the re INVITE for T 38 or Fax Pass Through Jitter Buffer Type Select either Fixed or Adaptive based on network conditions Jitter Buffer Length Select Low Medium or High based on network conditions Distinctive Ring Tone Default is NO Disable Call Waiting Default is NO Disable Call Waiting Tone Default is NO This is to disable the stutter call waiting tone when a call waiting call arrived Ring Timeout Incoming call will stop ringing No Key Entry Timeout Default is 4 seconds Early Dial Default is No Use only if proxy supports 484 response Dial Plan Prefix Sets the prefix added to each dialed number Use as
27. k ek See eee ee eee eee 8 5 2 4 Attended Transter 2 0 eee ceeesceeeseeeeeseeeeeaceeeeeeeeeseeeesaeeseeeeessaeeeesaeeseeeeees 9 5 3 Call UU sisanne EESE EEEE ESSEE EEEN EEEE 10 5 3 1 Call Features Tables 43 i ii di iia nin nihb hints 10 5 4 Status Light Indicator eee nnn nee aenee ree ere eee ee eee ear eer arse reer eee are re 10 6 CONFIGURATION GUIDE sisscsncsstsssaccsiaresaccictescanasaccaaccstannsaccaaceanaatanneancdineansateancanneanie 11 6 1 Configuring Unicorn 3001 using Web BrowSet cceeceeseeeeeereeeteeeeee 11 6 1 1 Accessing the Web Configuration sccseseesessetseeeseetseeteeeeeaes 11 6 1 2 User Programming and Configuration ccceeceeceeeeeeeeeeeeeneeeeeeees 12 6 1 3 PASSWOMS ii cictoioi dh chek sink abet enttinetee ellie elon dali dione ieee 12 6 1 4 Configuration Options and Explanations eceeeeeeeeeeeeeeeeneeeeeeees 12 6 1 4 1 Device 2 0 eee nC en en eee ae eee 12 Basic 9 0 fee e Ls eee ee eee ee ee eee eee eee 13 Super Options Setting sssrinin 15 FXS Port17 6 1 5 Saving the Configuration Changes eeeseseeeseeseeererresrssrrerrerrerreernss 24 6 1 6 Rebooting the Unicorn 3001 ssesseessesseesreesrrsrrrsrirserrnsrinsrinsrrnnrrrneens 24 6 2 Configuring Unicorn 3001 via Voice Prompt eseeseeeeseseeeeeerererrereeereen 24 6 2 1 DHCP MOQEisercccrsosiacnesenecce 24 6 22 Stati IP ModE st iniaa asin ea ahh ea Ea ta te RE EEN en te ee ec 25 6 2 3 Configur
28. ms or 30ms iLBC Payload Type This defines payload time for iLBC Default value is 98 The valid range is between 96 and 127 G726 16 Payload Type default is100 Fax Tone Detection Mode Jitter Buffer Type Jitter Buffer Length Distinctive Ring Tone Disable Call Waiting Disable Call Waiting Tone Ring Timeout No Key Entry Timeout Early Dial Dial Plan Prefix Use as Dial Key Dial Plan SUBSCRIBE for MWI G726 24 Payload Type Default is 99 G726 40 Payload Type 103 between 96 and 127 default is 103 G729E Payload Type 102 between 95 and 127 default is 102 VAD ONo Yes Symmetric RTP ONo O Yes Fax Mode T 38 Auto Detect Pass Through OCaller Callee Fixed Adaptive Low OMedium High Ring Tone 1 used if incoming caller ID is Ring Tone 1 used ifincoming caller ID is Ring Tone 1__ used if incoming caller ID is No OvYes nNno OYes 60 10 300 seconds default is 60 seconds 4 in seconds default is 4 seconds No Yes use Yes only if proxy supports 484 response ithis prefix string is added to each dialed number Ono Yes ifsetto Yes will function as the Re Dial key No do not send SUBSCRIBE for Message Waiting Indication Yes send periodical SUBSCRIBE for Message Waiting Indication Option Meaning G726 40 Payload Type Default value is 103 range is from 96 to 123 G729E Payload Type Default value
29. nd disable 13 Firmware Server IP Announces current Firmware Server IP Address address Enter 12 digit new IP address 14 Configuration Server IP Announces current Config Server Path IP Address address Enter 12 digit new IP address 15 Upgrade Protocol Upgrade protocol for firmware and configuration update Enter 9 to toggle between TFTP and HTTP 16 Firmware Version Firmware version information 17 Firmware Upgrade Firmware upgrade mode Enter 9 to rotate among the following three options 1 always check 2 check when pre suffix changes 3 never upgrade 47 Direct IP Calling Enter the target IP address to make a direct IP call after dial tone See Make a Direct IP Call 99 RESET Enter 9 to reboot the device or Enter MAC address to restore factory default setting See Restore Factory Default Setting section Invalid Entry Automatically returns to Main Menu Other Menu Prompt Features gt Just like pressing on the analog telephone you will hear Direct IP Calling which is just like selecting option 47 from the table above gt shifts down to the next menu option gt returns to the main menu gt 9 functions as the ENTER key in many cases to confirm an option gt All entered digit sequences have known lengths 2 digits for menu option and 12 digits for IP address Once all of the digits are collected the input will be processed gt Incorrect keyed ent
30. pset s memory The Unicorn 3001 will acquire its IP address from the first DHCP server it discovers from the office home network it is connected to To use the PPPoE feature the PPPoE account settings need to be set The Unicorn 3001 will attempt to establish a PPPoE session if any Copyright 2008 Hanlong Technology Co Ltd Page 12 of 26 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3001 http arttel ru HANLONG Unicorn 3001 User Manual of the PPPoE fields have been entered with data If Static IP mode is enabled then the IP address Subnet Mask Default Router IP address DNS Server 1 primary DNS Server 2 secondary fields will need to be configured by the user These fields are reset to zero by default Product Model This product model is Unicorn 3001 Software Version Information of software System Uptime Show system uptime since last reboot Indicates where the PPPoE connection is up if the PPPoE Link U P Uicorn3001 is connected to the DSL modem Basic Options Settings SS eee Web Port 80 default for HTTP is 80 C dynamically assigned via DHCP DHCP hostname Option 12 DHCP domain pti 15 DHCP vendor class ID fo Opti 60 ale specife p Option 43 use PPPoE PPPoE account ID IP Address PPPoE password eeeee PPPoE Service Name 3 z z Preferred DNS server statically configured as IP Address Subnet Mask Default Router
31. ransferee uses a device that does not support the second NOTIFY signal this will be the case In poor or unstable network scenarios this could also happen although the transfer may have been completed successfully 5 2 4 Attended Transfer Assuming that call party A and party B are in conversation Party A wants to Attend Transfer party B to party C gt Party A presses FLASH on the analog phone or Hook Flash for old model phones to get a dial tone gt Party A then dials party C s number then or wait for 4 seconds Party A and party C now are in conversation gt Party A can hang Note When Attended Transfer failed and if party A hangs up the Unicorn 3001 will ring party A again to remind party A that party B is still on the call by pressing FLASH or Hook again will restore the conversation between party A and party B Copyright 2008 Hanlong Technology Co Ltd Page 9 of 26 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3001 http arttel ru Ez HAMLONG TECHNOLOGY Unicorn 3001 User Manual 5 3 Call Features 5 3 1 Call Features Tables Following table shows the call features of Unicorn 3001 Key 30 Call Features Block Caller ID for all subsequent calls 31 Send Caller ID for all subsequent calls 67 Block Caller ID per call 82 Send Caller ID per call 50 Disable Call Waiting for all subsequent calls 51 Enable Call Waiting
32. ress Outbound Proxy SIP Outbound Proxy Server s URI or IP address SIP User ID SIP service subscriber s User ID Authenticate ID SIP service subscriber s Authenticate ID Can be identical to or different from SIP User ID Authenticate Password SIP service subscriber s account password SIP service subscriber s name which will be used for Name Caller ID display Use DNS SRV Default is No If set to Yes the client will use DNS SRV for server lookup If the Unicorn 3001 has an assigned PSTN telephone User ID is phone number this field should be set to Yes Otherwise set number it to No If Yes is set a user phone parameter will be attached to the From header in SIP request SIP Registration This parameter controls whether the Unicorn 3001 needs to send REGISTER messages to the proxy server The default setting is Yes Unregister On Reboot Default is No If set to Yes the SIP user will be unregistered on reboot Copyright 2008 Hanlong Technology Co Ltd Page 17 of 26 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3001 http arttel ru Ez HAMNMLONG TECHNOLOGY Unicorn 3001 User Manual Register Expiration This parameter allows the user to specify the time frequency in minutes the Unicorn 3001refreshes its registration with the specified registrar The default interval is 6 minutes The maximum interval is 65535 minutes a
33. ry cannot be deleted or undone The Unicorn 3001 will prompt you to start over by telling you that you made an error 5 2 5 2 1 Make Phone call Calling Phone or Extension Numbers gt Dial the number directly and wait for 4 seconds Default is 4 seconds To change the Copyright 2008 Hanlong Technology Co Ltd Page 7 of 26 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3001 http arttel ru Ez HANLONG Unicorn 3001 User Manual default change the settings via the web configuration page under No Key Entry Timeout Or gt Dial the number directly and press assuming that Use as Dial Key is set to YES during web configuration of your Unicorn 3001 Other functions available during the call are call waiting flash call transfer and call forward Your SIP gatekeeper proxy server needs to support these features in order for them to work 5 2 2 Direct IP to IP Calls Direct IP calling allows two parties that is a FXS Port with an analog phone and another VoIP Device to talk to each other in an ad hoc fashion without a SIP proxy Elements necessary to completing a Direct IP Call 1 Both Unicorn2101 and other VoIP Device have public IP addresses or 2 Both Unicorn2101 and other VoIP Device are on the same LAN using private IP addresses or 3 Both Unicorn2101 and other VoIP Device can be connected through a router using public or private IP addresses with necessary
34. set to Yes Call Forwarding amp Do Not Disturb are supported locally This parameter allows users to configure a User ID or extension number to be automatically dialed upon offhook Please note that only the user part of a SIP Srheok Aute Dial address needs to be entered here The Unicorn 3001 will automatically append the and the host portion of the corresponding SIP address SIP Extension to notify SIP server that the unit is behind Proxy Require the NAT Firewall Disable Call Waiting Default is NO No Key Entry Timeout Default is 4 seconds Preferred Vocoder The Unicorn 3001 supports up to 5 different Vocoder types including G 711 A U law G 726 Supports bit rates 16 24 32 and 40 note optional G 723 1 G 729A B iLBC note optional The user can configure Vocoders in Copyright 2008 Hanlong Technology Co Ltd Page 19 of 26 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3001 http arttel ru HAMLONG TECHNOLOGY Unicorn 3001 User Manual a preference list that will be included with the same preference order in SDP message The first Vocoder is entered by choosing the appropriate option in Choice 1 The last Vocoder is entered by choosing the appropriate option in Choice 8 G723 Rate This defines the encoding rate for G723 vocoder By default 6 3kbps rate is chosen iLBC Frame Size This sets the iLBC size in 20
35. ttel ru HANLONG Unicorn 3001 User Manual Run 1second ON then 1second OFF Indicates device software is running Fast blinking indicate the product in firmware upgrading or provision state Indicate status of the FXS Port on the back panel Busy ON Solid Green Available OFF Fast blinking Ringing Slow blinking FXS LEDs indicates voicemail for that port Indicate status of the Line Port on the back panel Busy ON Solid Green Available OFF Fast blinking Ringing 6 CONFIGURATION GUIDE 6 1 Configuring Unicorn 3001 using Web Browser Unicorn 3001 has embedded Web server and HTML pages that allow users to configure the Unicorn 3001 through an easy to use Web browser interface such as Microsoft s Internet Explorer or Netscape browser Below is a screen shot of the Unicorn 3001 configuration page FXS OPTIONS sP seer onan ot SIP User ID 8200 the user part of an SIP address Authenticate 8200 can be identical to or different from SIP User ID Bare tak gy Aitenticnte Passwort purposely not cisplavea tor securiyprotecton SUPER OPTIONS FXS PORT Ono Oves Ono Ores SIP Registration ONo yYes Unregister On Reboot No Oves in minutes default 1 hour max 45 days mea Ag sO no OvYes local SIP port 5060 _ default 080 6 1 1 Accessing the Web Configuration The Unicorn 3001 configuration page can be
36. xxxxxx where 001fc1xxxxxx is the MAC address of the Unicorn 3001 For more information regarding configuration file format please refer to the related technical documentation The configuration file can be downloaded via TFTP or HTTP from the central server A service provider or an enterprise with large deployment of Unicorn 3001s can easily manage the configuration and service provisioning of individual devices remotely and automatically from a central server The central provisioning system uses enhanced NAT friendly TFTP or HTTP thus no NAT issues and other communication protocols to communicate with each individual Unicorn 3001 for firmware upgrade etc 7 SOFTWARE UPGRADE To upgrade software Unicorn 3001 can be configured with a TFTP server where the new code image is located The TFTP upgrade can work in either static IP or DHCP mode using private or public IP address It is recommended to set the TFTP server address in either a public IP address There are two ways to set up the TFTP server to upgrade the firmware namely through voice menu prompt or via the Unicorn 3001 s Web configuration interface To configure the TFTP server via voice prompt follow section 5 1 with option 06 once set up the TFTP IP address power cycle the ATA the firmware will be fetched once the ATA boots up To configure the TFTP server via the Web configuration interface open up your browser to point at the IP address of the Unicorn 3001
Download Pdf Manuals
Related Search