1 HEADING 1
Contents
1. Step 5 NOTE The LCD will now display all of the partitions to which this user has access If you wish to remove a partition press the partition number on the keypad and the display will mark that partition with a hyphen indicating access has been removed If you wish to re establish user access to the partition press the partition number again Step 6 Press to save the data The LCD will then prompt you for the next user code Step 7 If another user code needs to be programmed return to Step If not press sf to exit this feature without saving the data NX 1248E User manual Page 13 04 10 04 Nw Networ g OTHER KEYPAD FUNCTIONS User menu The LCD keypads displays have a bilingual user s interface As a result you can simply select a user s function on the menu You can consult the menu by entering the k key To select a user s function following steps have to be performed Step 1 Enter the key The display will now begin scrolling through a list of functions and the corresponding numbers associated with those functions Select an option 90 journal 90 z journal Step 2 To select the option you must press the key with the number next to the option ex Consulting Log Review option 90 If you already know the option ex Log Review 90 you can immediately select the wanted option by pressing the 9 0 keys By doing this you don t have to browse through th2. STAY NIGHT will all flash if an alarm has occurred in any partition OR if a partition is in an exit delay with one or more other partitions disarmed e SYSTEM READY message will display on the LCD screen if ALL partitions are ready to be armed e SOUNDER will sound if ANY area has the sounder on This includes Entry delay Exit delay Chime and Alarm NX 1248E User manual Page 19 04 10 04 4 Networ g Displays in partitioning master mode ARMED AND READY STATUS The LCD screen will display the Armed and Ready status of ALL eight 8 partitions if any or all of the areas is armed or not ready Armed 1234 678 This display is reflecting all 8 areas are Ready and Area 5 is Ready 12345678 disarmed NOTE If a number is flashing on the armed line that area is armed Instant If a number is flashing on the ready line that area is ready to be Force Armed System Ready If ALL areas are disarmed and ready to arm this display will Type code to arm appear on the LCD screen ARMING AND DISARMING MULTIPLE PARTITIONS To arm disarm multiple partitions enter a code that has arm disarm authority for ALL of the partitions to be armed disarmed The following display will appear on the LCD screen 12 45 78 Disarm gt The numbers on the top line represent the disarmed areas SNC UE pe Arm gt to which this code has access The numbers on the bottom line represent the areas that are armed Refer to the following table for possible condi
3. 117 Zone 118 Zone 119 Zone 120 Zone 121 Zone 122 Zone 123 Page 27 04 10 04 Networ 7 Zone 124 v G Zone 125 Zone 126 Zone 127 Zone 128 Zone 129 Zone 130 Zone 131 Zone 132 Zone 133 Zone 134 Zone 135 Zone 136 Zone 137 Zone 138 Zone 139 Zone 140 Zone 141 Zone 142 Zone 143 Zone 144 Zone 145 Zone 146 NX 1248E User manual Zone 147 Zone 148 Zone 149 Zone 150 Zone 151 Zone 152 Zone 153 Zone 154 Zone 155 Zone 156 Zone 157 Zone 158 Zone 159 Zone 160 Zone 161 Zone 162 Zone 163 Zone 164 Zone 165 Zone 166 Zone 167 Zone 168 Zone 169 Page 28 Zone 170 Zone 171 Zone 172 Zone 173 Zone 174 Zone 175 Zone 176 Zone 177 Zone 178 Zone 179 Zone 180 Zone 181 Zone 182 Zone 183 Zone 184 Zone 185 Zone 186 Zone 187 Zone 188 Zone 189 Zone 190 Zone 191 Zone 192 04 10 04 www gesecurity com EMEA Distribution is a division of GE Security EMEA bvba COPYRIGHT 2004 GE Security EMEA bvba All rights reserved GE Security EMEA bvba grants the right to reprint this manual for internal use only GE Security EMEA bvba reserves the right to change information without notice
4. 20 KEYPAD CONTROL TONES BEEPS sicsccssssccssessecsasssvecsesosiessessssossuconseedsseedscseseassstaccosesdecsssesteossbucseesssectosseesssesusvensoes 22 SERVICE DISPLAY sbedsesssoesassssosecsdcuousssestsedsdevsesseossecesss 23 NX 1248E User manual Page 2 04 10 04 Networ APPENDIX A EVENT LOG APPENDIX B REFERENCE TABLES NX 1248E User manual Page 3 04 10 04 DA Networ 9 INTRODUCTION This manual is furnished to help you understand your security system and become proficient in its operation All users of your security system should read and follow the instructions in this booklet and if possible practice on the keypad control while your professional installer is on site Failure to do so could result in the security system not working properly Please keep this booklet in an accessible location for the life of the security system If you do not understand any part of this manual you should notify your installing company The SECURITY CONTROL can be turned on ARMED and off DISARMED by entering a 4 or 6 digit code into the Keypad Control which is similar to a telephone keypad If your Security Control has been so programmed you may be able to turn on ARM your System by simply double pressing the AWAY STAY or NIGHT key The system must always be disarmed using a 4 or 6 digit code The LCD keypad includes 4 lights and a 32 characte
5. are detected Zone or Box Tamper Low Battery AC Power Fail or Expander trouble e Beeps 3 times every minute indicating a low battery or missing transmitter is detected if wireless device is in system Entering code will suppress the sounder for 12 hours Entering a valid code will silence the keypad sounder when it is pulsing The arm disarm state of your system will not change when entering a code to silence a pulsing keypad sounder Please contact your installer if a trouble condition exists NX 1248E User manual Page 22 04 10 04 SERVICE DISPLAY The following message will be displayed periodically if the security system reguires service Call your service provider prompily if this message is observed Service Reguired Type 2 for help Control Over current Control Siren trouble Control Box tamper Control Phone trouble Control Fail to Comm Control Ground fault Control Loss of time Mii Control Power trouble Control Low Batter Expansion Over current Expansion Aux comm fail rm um O x lt o so o G9 Us 5 oo cr O 70 oo gt 5 lt NX 1248E User manual If you see this display press followed by the 2 key One or more of the following fault messages will be displayed Use the A V scroll keys to browse through them To exit the service messages press A short circuit of a control s power supply has occurred Open circuit has occurred on the
6. bell or siren circuit The Box Tamper circuit has activated The phone line connected to the control is not operating properly The control attempted to communicate a message to the Central Station but was unsuccessful A short to ground has been detected on a control circuit Your system has lost total power and needs the clock reset The main power to your system is not on The standby battery is low A short circuit of an expansion devices power supply has occurred An auxiliary reporting device has failed to communicate The main power to an expansion power supply is not on An expansion power supply has a low battery Page 23 04 10 04 v Networ 9 Expander A box containing an expansion device has been opened Box tamper Expansion An expansion device or keypad is not reporting to the control panel Trouble Expansion Open circuit has occurred on the bell or siren circuit of the expander Siren trouble Expansion A radio receiver is being jammed Not applicable to all controls RF Jammed Zone A zone is tampered Press sk to identify the tampered zone Tamper Press k Zone Low Batt Press A wireless device has a low battery Press k to identify the zone Zone A wireless or multiplexed zone device is not reporting to the control Lost Press Press to identify the zone Zone A zone is experiencing some form of trouble probably wiring Trouble Press Press to identify
7. mode Test function optional If programmed this function will perform a battery test communicator test and or a siren test Step 1 Press 4 4 The test will be performed as programmed Step 2 If the siren test is performed enter a user code to silence the siren No alarms will be sent and no reports will be sent unless a communicator test is performed at which time a test signal will be sent Display test The keyboard also provides a testfuntion by the means of which the LCD display and all LED s are tested Step 1 Press 4 5 The test will be performed and all of the LCD pixels and LED indicators will flash Step 2 Press the Key to leave the display test Light control for X 10 Devices optional This menu allows you to control up to ten X 10 devices from each keypad Step 1 Press 4 5 The LCD screen will prompt you to Select Light Number 0 9 Step 2 Enter the number of the X 10 device you want to control The LCD screen will show the light number on the left On the right side of the display it will prompt you to turn the light X 10 device On or Off Step 3 Press the V key to turn the X 10 device On or press the A keyt o turn the X 10 device Off Step 4 The LCD screen will again prompt you to Select Light Number 0 9 Step 5 Repeat Steps 2 and 3 until complete Step 6 Press the Key to exit from the X 10 menu NX 1248E User manual Page 16 04
8. the zone NX 1248E User manual Page 24 04 10 04 Networ 9 my APPENDIX A EVENT LOG NOTE Your system may not have all of the features listed in this table DISPLAY DESCRIPTION TXlobat Transmitter Low Battery transmitter has a low battery ZN Lost Zone Lost A wireless or multiplexed zone device is not reporting to the control Duress Duress The control has been armed or disarmed with a Duress code Man Fire Manual Fire Keypad Fire has been activated Aux 2 Auxiliary 2 Keypad Medical has been activated Panic Panic Keypad Panic has been activated KP Tamper Keypad Tamper The keypad tamper has been activated BoxTamp Box Tamper The box tamper circuit has been activated AC Fail AC Fail AC failure has been detected OverCur Over Current A short circuit of a power supply has occurred Srn Tamp Siren Tamper A siren or speaker tamper has been detected Tel Fit Telephone Fault A telephone fault or tamper has been detected Exp Trb Expansion Trouble An expansion device or keypad is not reporting to the control Log Full Log Full The event log is full Old events will be pushed out as new ones enter the log Open Open Reports user number date time and partition of opening Close Close Reports user number date time and partition of closing Exit Err Exit Error Entry Exit zone was faulted at th
9. 10 04 Netwo G Change languages This function allows you to switch between the two languages programmed in your keypad NOTE You must exit any other function mode before attempting to change languages Step 1 Press 4 9 The LCD display switches to the other language Step 2 To switch back to the other language only step 1 has to be repeated Detector reset function This function is used to reset Smoke Detectors and Zone Troubles Your system must be Disarmed to use the Reset function Step 1 Press 7 Resets have now been performed The FIRE light will go off if the smoke detectors have been reset Step 2 If the keypad begins beeping the reset did not execute properly Enter your code to silence the keypad Wait a few minutes and repeat step 2 to attempt another reset If the keypad siill beeps after repeated attempts please contact your installer Reading the event log The control panel has an event log that can be retrieved using a master code This log contains a listing of the events along with date time and partition where the event occurred An overview of possible events can be found in Appendix A of this manual Step 1 To view the log press 9 0 The LCD screen will prompt you for a code Step 2 Enter your master code The LCD screen will now show the most recent event Step 3 To view the events from most recent to the oldest press the v down scroll key Step 4 To view the events from th
10. NetworX Series NX 1248E LCD keypad User manual DA Networ g TABLE OF CONTENTS TABLE OF CONTENTI ire e reset roe eit aao e denaro Leon aep do e ep eU ina ep o sa aepo e Seni ndd DAS S a dnd dod GN eges Ua UCAS O NODYN 2 AHOT DLEA M LO N YF S 4 GLOSSARY OF TERMS siasesssssesecisssessssendestesesscsesssesesvesnivesves eo De se awe se evo a sepe PE CH ee gua e ao Desv eue eva e eo e QV o So V iras SEN To S er Vased Pera ini 5 KEYPAD DISPLAY amp LED S eese coeno ee poa sn O ena noe etu REESE SERRA NNE POTE ee dan eae una eaa 6 UNDERSTANDING THE LIGHTED KEYS iM Gi eet GY eese GYG colds GW GW GY eo eee ue BY 6 EMERGENCY ACTIVATION KEYS acc scsctessesecsscsctvesctecctoscsuevessssessonsecessessascavenwsseevessesestsdceduaueeessestessseouosssseetsecusccvessses 7 KEYPAD FUNCTIONS 25 cnsecadiccsctasatiesesasesceosousiesenksccscosdcdasvessesscaccsovdesscsebdnesos stasassasscesadueesasestecsossdecdstassussceensessesnee 8 ARMING YOUR SYSTEM IN THE AWAY MODE ecce e e e e e enn emen enin nnns LLCC esteen e ese use AAA GN 8 MAKING THE SYSTEM READY TO ARM eene ere e e e nnn ener nn nnns nnns nsn use esu usu e enke ener en en GG AAA UG 8 ARMING YOUR SYSTEM IN THE STAY MODE iseseeseeeseseeeen ne e e ene ener nennen LLCC GLGC I I AAA GN 9 USING THE QUICK ARM OPTIONAL eeeeseeeeeeee enne nennen ertet ee
11. ROGRAMMING PHONE NUMBERS OPTIONAL eeseeeeeeee eene enne enne enes 15 TEST FUNCTION OPTIONAT 3 2 nete Ards t nie net A WE IA GT e hie a Ee 16 DISPLAY TEST aee eret tette bt at te te etes tet ate BD ve et cette BN d FATB Y 16 LIGHT CONTROL FOR X 10 DEVICES 16 CHANGE LANGUAGES Ai a FF SW Yd WY HWY WY Yd dt GYW 17 DETECTOR RESET FUNCTION oth esee eee tote GG a GWY GG Yd Y GWYR YG A 17 READING THE EVENT LOG RWY Gyd WY Y WY YA Y WR 17 ADJUSTING THE VIEW BRIGHTNESS OF THE _ 0 teen LLGC LL e e n ene CGG CGG GAA GGH 18 SETTING THE SYSTEM CLOG ie GW Y WY e e Y ee d rete Y tb NE tre LH WR 18 TURNING THE DOOR CHIME ON AND OFF sseuuuuuu Y e eene emen nnn ener nsesese ese ese e ese ese sse ss ese ese UU 18 A rore e re dette in iei i ri tM NE 18 PARTITIONED SYSTEMS OPERATION eee ee eee ee ee eene sete aee seen Pee seen e e eaae e eee esse sense aee seen sesta 19 LIGHTS IN PARTITIONING MASTER MODE e e e ene enn nnn LLGC LLGC LLCC LLCC LLCC LCC CG CGG GG AAA GN 19 DISPLAYS IN PARTITIONING MASTER MODE eere e e e ene enn nnnnn ener nsns isis usus keen en GG AAA II UG
12. ay An option that allows an instant alarm condition for Entry Exit doors or grants a delay to allow someone to enter exit the building without an alarm or before entering a user code to disarm Master Code A master arm disarm code that can program other user codes Partitioned System A system divided into multiple areas in which its own user or users control each area Perimeter The outer edge of the protected area Guick Arm An option that allows you to turn on ARM the security system by double pressing either the AWAY STAY or NIGHT key on the keypad for ARMING only as programmed by the installing company User Code A four 4 or six 6 digit entry code used to arm or disarm the system NX 1248E User manual Page 5 04 10 04 Netwo G KEYPAD DISPLAY amp LED s Understanding the lighted keys p 2 amp down Dw scroll Keys i 13 23 33 E i M i Ex as nda blu bh 3 Ur a Bj m ENTE ede 4 Function y Pss Ba Lay nic mn am Ta AE EFE ill f ler Pina keys 3 f 0 Cs Pa High as beca M fm Tarw miss iw DOE Fert Un E Pari howdy Id frais 7 Mir i Programmable Numeric emergency code entry activation keys keys AWAY Lighted key The AWAY lighted key is on when the system is armed The AWAY lighted key is off when it is disarmed The AWAY lighted key will flash when there has be
13. de because of duplication or such the sounder will beep 3 times Step 5 If another user code needs to be programmed return to Step 3 Step 6 Press the st key while the ready light is flashing to exit the User Code Programming Mode NX 1248E User manual Page 12 04 10 04 my Networ 9 ASSIGNING USER CODE AUTHORITY LEVELS Assign authority levels to users by following the steps below Assign user codes before assigning authority levels Your system must be in the disarmed state to change user code authority levels Step 1 Press 6 Step 2 Enter a Master Arm Disarm Code NOTE Someone changing the authority of another person can only add or remove partition authorization for partitions to which they have access Step 3 Enter the 2 digit applies to NX4 6 8 or 3 digit applies to NX8E user number Always use leading zeros when necessary i e 004 for user number 4 Step 4 The LCD will now prompt you for the attributes in the following chart PROMPT DO NOT CHANGE THIS SEGMENT Open Close Rprt Bypass enable Arm Disarm Master code These are for use by a professional installer only O No 1 Yes Your keypress will apply to the user code you entered in Step 3 Sched arm only Arm only Reserved Output 4 Output 3 Output 2 Output 1 If these messages appear on the LCD screen press the key until you return to the prompt for the user code or until you exit this adjust mode
14. e NOTE If any zones are bypassed a sensor in that zone can be violated without affecting the ready light e The security system will not arm if the System Not Ready message is displayed It can be force armed if the entire System Not Ready message is flashing Refer to the following section Making Your System Ready to Arm e lf the Service Required message is alternated displayed you may not have AC power Restore power if possible If T am not contact the installing company Step 2 Enter your 4 or 6 digit user code Optional if programmed e lf Auto Bypass is enabled all interior zones will be bypassed if you do not leave through a designated entry exit door If Auto Bypass is enabled omit Step 3 e When Auto Instant is enabled if you do not leave through a designated entry exit door the display will read nstant indicating that the entry exit doors no longer have an entry delay If Auto Instant is enabled omit Step 4 Step 3 Press the STAY key e The STAY key will illuminate indicating that all interior zones are bypassed All interior devices will bypass automatically giving the user freedom of movement within the interior area e The BYPASS key will illuminate if any zone s are bypassed If any zone s have been bypassed previously by the user the light s corresponding to the bypassed zone s will illuminate alerting the user that a zone s may be unprotected and can be faulted witho
15. e are set Turning the door chime ON and OFF The door chime feature must be enabled by your installer The door chime is turned on or off by pressing 1 Each time 1 is pressed it will toggle the chime feature on off and produce a momentary ding dong sound Walktest Not supported with this keypad NX 1248E User manual Page 18 04 10 04 my Networ 9 PARTITIONED SYSTEMS OPERATION This system is O multi partitioned O not partitioned If your system is multi partitioned and the keypad resides in one partition your keypad will provide the status of the zones in your partitioning by using the screen messages described earlier in this manual The Master Mode of operation if programmed by your installer allows you to access any partitioning providing your code is authorized within the system and perform functions in other partitions Read the following paragraphs to help you understand the different screen messages that will be displayed from your keypad Lights in partitioning master mode e BYPASS will illuminate if ANY area has a zone bypassed e AWAY will illuminate steady if ALL partitions are armed and at least one of those partitions are in the AWAY mode e STAY will illuminate steady if ALL partitions are armed and at least one of those partitions are in the STAY mode e NIGHT will illuminate steady if ALL partitions are armed and at least one of those partitions are in the NIGHT mode e AWAY
16. e instant the exit delay expired Rec Close Recent Close An alarm occurred within 5 minutes after the control was armed Autotest Auto Test Sending a communicator test at a specified interval Start Prog Start Programming Local programming is started End Prog End Programming Local programming is ended Start Dnld Start Download Download session is started End Dnld End Download Download session is ended Cancel Cancel System is disarmed and the Cancel button was pressed within 5 minutes of an alarm Gnd Fit Ground Fault A short to ground has been detected Man Test Manual Test Bell and or communicator test while system is in disarmed condition Re exit Re Exit The exit delay has been re started without disarming the system Output Trip Output Trip A trip has occurred on an expander auxiliary output Data Lost Data Lost Communication of a signal has failed log only event Walk test Walk Test A zone Walk Test mode has been activated End Test End Test Test has been ended Cross Trip Cross Trip The first zone of a cross zone has been tripped log only Expansion Expansion Event An expansion module created an undefined event Event Partial Arm Partial Arm Reports a closing in the stay mode Listen In Listen In A listen in function has been activated Service Start Service Start Technician is on site Service Service End Technician is off site Code Entry Code Entry A code has been entered NX 1248E User manua
17. e oldest to the newest press the A up scroll key The display contains the following information Event Open 75 gt User or Zone ID Date 9 25 17 57 P3 gt Indicates partition Month Day and indicates an ATime shown in event not reported 24 hour format This screen shows an opening of Partition 3 on September 25th at 5 27 p m by user 75 The shows that this event is not programmed to be reported to the central monitoring station NX 1248E User manual Page 17 04 10 04 Netwo G Adjusting the view brightness of the LCD Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Enter 9 1 The LCD Screen will prompt for a code Enter master code The LCD will now prompt you to raise or lower the view Using the k 9 1 scroll keys to the right of the LCD you can raise the text or lower the text To advance to the Brightness option press The LCD will prompt you to brighten or dim the LCD lighting Use the v scroll keys again to adjust to desired brightness When completed exit by pressing Setting the system clock Step 1 Step 2 Step 3 Step 4 Step 5 Enter k 9 7 The LCD Screen will prompt for a code Enter master code The time and date will be displayed with the current hour flashing Use the v scroll keys to select the proper hour Enter the key to move to the minutes day of week date month and year Repeat Steps 3 and 4 until the entire time and dat
18. e user s menu The following list of menu selections will scroll automatically NOTE Some of the functions are not listed because they are installer level functions Each time the key is pressed the next menu item will be displayed To exit the user s menu press the ff key Description English 1 Zone Review Set Tone Master Mode Service Check Alarm Memory Telephone 1 Telephone 2 Telephone ff 3 Test Display test Light Control English 2 User PIN User Authority Detector Reset Log Review View Settings Set Date Time Walktest Silent Exit NX 1248E User manual Page 14 04 10 04 Netwo G View zone status Step 1 Step 2 Step 3 Enter the key followed by the key The LCD Screen will display the zone status Use the up and down scroll keys v to browse through the descriptions The LCD Screen will display the list of all zones in seguential order by zone number Press to exit this function Setting the keypad tone Step 1 Step 2 Step 3 Step 4 Press the key followed by the 0 key Keypad is now in the Adjust Tone mode Raise tone gt A key he righ Press the A up scroll key located on the right Lower tone gt side of the display to make the keypad sounder go to higher tones Press the v down scroll key to make the keypad sounder adjust to lower tones When the desired tone is reac
19. each time 2 digits of the zone s that must be bypassed Example to bypass zones 4 en 5 press 0 4 0 5 Step 5 Press the BYPASS key again The zone is now bypassed Step 6 Repeat steps 4 and 5 for any other zone s that need to be bypassed Step 7 Press BYPASS again OR press ff to exit the Bypass Mode The bypass light will stop flashing upon exiting the Bypass Mode Pressing A or W will display all bypassed zones Press to exit this viewing mode If you do not know the number of the zone you wish to bypass use the following Step 1 Press A The description for zone 1 will be displayed Step 2 Use the A W scroll keys to browse through the custom descriptions for the zones in this system Step 3 To bypass or unbypass a specific zone press the BYPASS key while that zone is displayed Step 4 When finished press the jf key to return to the code entry screen NOTE All zones will automatically be unbypassed each time the system is disarmed Group bypass Step 1 Press the BYPASS key Step 2 When the LCD prompts for a code optional if programmed enter your user code Step 3 The bypass light flashes Step 4 Press 0 0 Step 5 Press the BYPASS key again Step 6 The bypass light will stop flashing and will illuminate Step 7 Pressing the v scroll keys will display all bypassed zones Press the key to exit this viewing mode NOTE All zones will automatically be unbypassed each time
20. elp press gt entire System Not Ready message is flashing Refer to the following section Making Your System Ready to Arm e lf the Service Required message is alternately displayed you may not have AC power Restore power if possible If not contact the installing company Step 2 Enter your 4 or 6 digit user code to arm the system e The AWAY key will illuminate steady The STAY and System Armed NIGHT keys will flash during the exit delay All Zones Secure e You may now leave the building IMPORTANT The keypad tones will accelerate during the last 10 seconds of the exit delay The user may wish to disarm and re arm the system if more time is needed Making the system ready to arm If the System Ready message is not displayed a zone is not secure To identify this zone press A V to the right of the display to browse through the zones that are not normal If you wish to bypass or unbypass one of these zones press BYPASS while that zone is being displayed When finished viewing the zones press to return to the code entry screen NX 1248E User manual Page 8 04 10 04 Netwo G Arming your system in the STAY mode STAY is utilized when the user is inside the premise and wants protection around the perimeter The steps to arm in the STAY Mode are as follows Step 1 Close all protected doors and windows e The System Ready message will be displayed when all protected zones and sensors are secur
21. en an alarm during the previous arm cycle STAY Lighted key The STAY lighted key is on when the system is armed The stay light is illuminated when all interior zones are bypassed The STAY lighted key is off when it is disarmed The STAY lighted key will flash when there has been an alarm during the previous arm cycle NIGHT Lighted key The NIGHT lighted key is on when the system is armed The NIGHT lighted key is off when it is disarmed The NIGHT lighted key will flash when there has been an alarm during the previous arm cycle BYPASS Lighted key The BYPASS lighted key is on when any zone in this keypad s partition is bypassed If the BYPASS lighted key is off no zones are bypassed NX 1248E User manual Page 6 04 10 04 Networ Instant Message The LCD display will read Instant when the entry exit door s have no delay See Arming System in Stay Mode The doors can be changed from instant to delay toggled by pressing the STAY key when the system is armed EMERGENCY ACTIVATION KEYS Fire Auxiliary Emergency Police NOTES You must hold these keys for 2 seconds to activate these functions Your system may not be programmed for these activation keys You should press these keys only in an emergency situation that requires response by emergency personnel If your system is programmed for these functions the following reports can be sent Fire Key This key can activate the fire alar
22. hed press the key to set this tone and exit from the Adjust Tone mode View alarm memory Step 1 Step 2 Step 3 Press the followed by the 3 key to display the zone s on the keypad that created the last alarm 1 Alarm Memory The LCD Screen will display the zone description for those zones Press to exit the alarm memory Programming phone numbers optional If private reporting voice or siren tone is enabled up to 3 phone numbers can be programmed or changed A telephone number towards a central monitoring station cannot be changed or reviewed Step 1 Step 2 Step 3 Disarm the system if it is not already disarmed Press the key followed by 4 1 to program change telephone number 1 4 2 to program change telephone number 2 4 3 to program change telephone number 3 The LCD display will prompt you for a code Enter a master code If the number cannot be changed the keypad sounder will produde 3 short beeps NX 1248E User manual Page 15 04 10 04 Netwo G Step 4 The LCD display will prompt you for a new phone number Enter phone num Enter the phone number EEEEEEEEEEEEEEEE Note empty location are shown as a E In order to delete a number you just program all Es This is done with the bypass key with the key the cursor can be shifted to the right without changing the telephone number Step 5 When finished press the Key to leave this program
23. ion of the entry delay time or until you enter a valid code Type code to e_ Enter a valid user code Disarm e The currently armed key AWAY STAY or NIGHT will go off and the tone will stop The security system is now DISARMED If a valid code is not entered before the end of the entry delay an alarm will occur NOTE If the AWAY STAY or NIGHT keys are all flashing during the entry delay the alarm system has been activated in your absence Leave the building immediately and call your alarm company and or the police from a safe location CANCEL ABORT feature optional Entering a user code during an alarm report to the central station will stop the communication of all abortable reports NOTE The abort feature must be enabled Entering a user code after an alarm report to the central station will send an appending report to the central station after the cancel report NOTE The cancel feature must be enabled NX 1248E User manual Page 10 04 10 04 Netwo G Bypassing zones If you wish to bypass one or more zones this must be done while the system is in the disarmed state If the zone is not known refer to Procedure 2 Procedure 1 If you know the number of the zone to bypass use the following steps Procedure 2 steps Step 1 Press the BYPASS key Step 2 When the LCD prompts for a code optional if programmed enter your user code Step 3 The bypass light flashes Step 4 Enter the zone number
24. l Page 25 04 10 04 Networ DISPLAY DESCRIPTION First Open First Open Reports when the first partition is disarmed Last Close Last Close Reports when the last partition is armed Sprnklr Sprinkler Instant sprinkler supervisory report Clock Set Clock Set Clock has been reset RF Jammed Jammed A wireless expansion module is jammed CleanMe CleanMe A smoke detector requires cleaning APPENDIX B REFERENCE TABLES IMPORTANT These reference tables on the following pages need to be completed by your installer Keep these tables in a safe place Installing Service Company Address Telephone number Name central station Telephone number central station Function codes programmed Controls function action Entry exit delay times in seconds Exit delay time _ Secondary Exit delay time Entry delay time SecondaryEntrydelaytime This system is is not partitioned This system counts zones NX 1248E User manual Page 26 04 10 04 Networ y Programmed functions Abort delay Battery test Cancel alarm Chime UDDDDDDDD Zone descriptions Zone 1 Zone 2 Zone 3 Zone 4 Zone 5 Zone 6 Zone 7 Zone 8 Zone 9 Zone 10 Zone 11 Zone 12 Zone 13 Zone 14 Zone 15 Zone 16 Zone 17 Zone 18 Zone 19 Zone 20 Zone 21 Z
25. m when pressed for two seconds If your system is connected to a monitoring center an emergency report could be sent to that center Auxiliary Emergency Key This key can activate the auxiliary alarm when pressed for two seconds If your system is connected to a monitoring center an emergency report could be sent to that center Police Panic Hold Up Key This key can sound a local audible alarm when pressed for two seconds If your system is connected to a monitoring center an emergency report could be transmitted to that center NOTE Some Panic Hold Up alarms are programmed to be silent at the protected site while reporting an alarm to the monitoring center Check with your installing company to determine how your security system will respond to the Panic Hold Up activation NX 1248E User manual Page 7 04 10 04 Networ KEYPAD FUNCTIONS Arming your system in the AWAY mode AWAY is utilized when the user is going away from the premise and wants the interior protected Listed below are the steps to arm in the AWAY Mode Step 1 Close all protected doors and windows e The System Ready message will be displayed when all System Ready protected zones and sensors are secure NOTE If any Type Code to Arm zones are bypassed a sensor in that zone can be violated without affecting the ready light e The security system will not arm if the System Not System Not Ready Ready message is displayed lt can be force armed if the For h
26. one 22 Zone 23 Zone 24 Zone 25 Zone 26 Zone 27 Zone 28 Zone 29 Zone 30 Zone 31 Zone 32 Zone 33 Zone 34 Zone 35 Zone 36 Zone 37 Zone 38 Zone 39 Zone 40 Zone 41 NX 1248E User manual Change partitions LED Communicator test Manual fire alarm Manual medical alarm Manual panic alarm Zone 42 Zone 43 Zone 44 Zone 45 Zone 46 Zone 47 Zone 48 Zone 49 Zone 50 Zone 51 Zone 52 Zone 53 Zone 54 Zone 55 Zone 56 Zone 57 Zone 58 Zone 59 Zone 60 Zone 61 Zone 62 Zone 63 Zone 64 Zone 65 Zone 66 Zone 67 Zone 68 Zone 69 Zone 70 Zone 71 Zone 72 Zone 73 Zone 74 Zone 75 Zone 76 Zone 77 Zone 78 Zone 79 Zone 80 Zone 81 Zone 82 Forced arming Group bypass Quick arm Re Exit Service Light Message enabled Siren test Zone 83 Zone 84 Zone 85 Zone 86 Zone 87 Zone 88 Zone 89 Zone 90 Zone 91 Zone 92 Zone 93 Zone 94 Zone 95 Zone 96 Zone 97 Zone 98 Zone 99 Zone 100 Zone 101 Zone 102 Zone 103 Zone 104 Zone 105 Zone 106 Zone 107 Zone 108 Zone 109 Zone 110 Zone 111 Zone 112 Zone 113 Zone 114 Zone 115 Zone 116 Zone
27. r liguid crystal display and a built in electronic sounder These provide specific information relating to the status of the security system which is described in the booklet Understanding what the lights and sounds mean will help you to easily operate your system Keep in mind the level of security you will obtain with this system relates specifically with two major factors 1 The quantity quality and placement of security devices attached to this system 2 The knowledge you have of the security system and how that knowledge is utilized in a weekly test of the complete system You should be aware of the following facts when preparing a safety security plan for your home business 1 Your security system is an electronic device and is subject to failure or malfunction Do not rely on it as your single source of security 2 Your system should be tested weekly 3 Your system will not work without power 4 Warning devices will need to be loud enough wired correctly and properly placed to provide notification of an alarm event 5 Smoke and heat detectors may not detect heat and smoke in all situations 6 Use qualified security professionals to install and maintain your security system 7 It may be possible to arm the security system without the backup battery connected Your periodic test should be done with AC Power removed to verify the battery is connected and adeguately charged 8 Care should be taken to plug in and restrain
28. rte ne senes ss DD DDN 9 CHANGING MODES WHILE SYSTEM ARMED 10 DISARMING THE SYSTEM 1i yw CT detect ree crece eher Y yw Dy Y WA eii 10 CANCEL ABORT FEATURE OPTIONAL ccsssccesssscecsessececseceecesseeecsesaececseaeeeeeeeeecsesaesecseseecesaeeecsesaeeesseaeeessneeeeeneaas 10 BYPASSING ZONES i TG A YT y RG Y y WN 11 GROUP BYPASS Tw GR GW WR 11 UNBYPASSINGLA y y 12 ADDING AND CHANGING USER CODES sccccssssscssssscccssssccccssseccesssccscsssaccscssccecesssccsessnacccesscaececsscsccsssecesessneess 12 ASSIGNING USER CODE AUTHORITY LEVELG scccssssssssssccesssscccssssccccssscccscsssccesssaccsessceecscscccceneccssessseees 13 OTHER KEYPAD FUNCTIONS oou es eset o opa aerea o Fees aa sbecdisesoesssebsdeces e oe Ue Eae ee sbesdsosvasoooess 14 USER MENU 3 she Eee ete aote ae ten emt atti er Aie attese 14 VIEW ZONE S LATUS nectit tet aite et aee e b ite am AD Rb e Be E B E o Beas 15 SETTING THE KEYPAD nh aree eee ete et ie re tas e Eee Bre ext dete event e ette Eve eat B ie re ERO Ee e be 15 VIEW ALARM MEMORY i ineat ee aceti arm eite am etie m Bites BEER bre arse tec dete loe 15 P
29. the AC transformer after testing Please read the following information and instructions carefully before operating your security control system NX 1248E User manual Page 4 04 10 04 Ry Networ 9 GLOSSARY OF TERMS Abort Delay An option that allows a delay in reporting to the central station Authority Level The level of access an individual has when using an alarm panel Central Station The location where alarm data is sent during an alarm report Chime Feature An option that allows the keypad to sound a ding dong whenever an entry exit door is opened Codes Can be either User Codes relating to a person or Function Codes a toggle switch to turn specific functions on off NOTE A system may have either four digit codes or six digit codes but not a mixture of the two Duress Code An option that allows a special code to be sent to the central station that indicates the alarm system is being operated under duress Forced Arming An option that allows the system to be turned on ARMED with one or more zones open A system that is ready to be force armed will flash the entire message System Not Ready For Help press NOTE Those zones that are not ready will not create an alarm Function Code A Function Code is either a four 4 or six 6 digit code that has been programmed by the installer to operate a device Group Bypass An option that allows the user to bypass multiple zones with a single operation Instant Del
30. the system is disarmed NX 1248E User manual Page 11 04 10 04 v Networ 9 Unbypassing Step 1 Press the BYPASS key Step 2 When the LCD prompts for a code optional if programmed enter your user code Step 3 The bypass light flashes Step 4 Enter the zone number each time 2 digits of the zone s that must be unbypassed Example to bypass zones 4 en 5 press 0 4 0 5 Step 5 Press the BYPASS key again Step 6 The bypass light will stop flashing NOTE All zones will automatically be unbypassed each time the system is disarmed ADDING AND CHANGING USER CODES Your system must be Disarmed to add change user codes Step 1 Press k 5 Step 2 Enter a Master Arm Disarm Code NOTE For partitioned systems someone changing the code of another person must have access to all or more partitions than the user being changed Step 3 Enter the 2 digit applies to NX4 6 8 or 3 digit applies to NX8E user number always enter 2 digit such as 0 3 for user 3 or 1 0 0 for user 100 The LCD keypad will display the current code for this user Stars represent blanks Note To delete a user code press four times for a 4 digit code or six times for a 6 digit code the Cancel key Step 4 Enter the new four 4 or six 6 digit user code If you are changing the current code you may use the up and down scroll keys to select the digit to change and enter the correct number If it rejects the co
31. tions LCD DISPLAY FOR AREA TOP LINE OVER BOTTOM LINE CONDITION E Area Not used or Authorized Bir Area Not Ready ah 5 idest Area Ready to Force Arm Flashing Area Area Armed Instant RUP Area Disarmed amp Ready to Arm rie Area is Armed To disarm all of these areas press the up scroll key To arm all of these areas press the v down scroll key e Totoggle a single area between the armed and disarmed conditions press number For example If Area 4 is armed k 4 will disarm Area 4 If Area 4 is disarmed k 4 will arm it e Press AWAY STAY or NIGHT once to arm all authorized partitions into the corresponding mode e To control the individual areas refer to the following section NX 1248E User manual Page 20 04 10 04 v Networ 9 OPERATING INDIVIDUAL AREAS IN THE MULTI PARTITION Enter a code that is a valid arm disarm code for the area you wish to operate The following display will appear on the LCD screen 12 4 78 Disarm gt Only the areas authorized by this code will appear 8 56 Arm gt To toggle between the armed and disarmed states of an individual area press Area number To operate an individual area enter the number of the partition you wish to operate The LCD keypad will now operate as a single area keypad All keys and functions entered will affect this individual partition only The lights and display represent the stat
32. us of that partition only The word System will be replaced with the word Area The following is an example of this feature To exit this screen press st Area 5 is selected and Area 5 is ready to arm To exit the Area 5 Ready NO Type code to arm individual partition mode enter SILENCING ALARMS IN THE MULTI PARTITION MODE If the keypad is sounding an alarm or the siren is running it can be silenced by entering a code with the authority for the area s that are in alarm NOTE The BYPASS AWAY STAY and NIGHT keys will only work if an individual partition is selected NX 1248E User manual Page 21 04 10 04 my Networ 9 KEYPAD CONTROL TONES BEEPS A sounder is built into the keypad and may sound for any of the following reasons e Beeps for all keypresses e Sounds a continuous tone during the Entry delay time e Pulses when a day zone is violated while the system is disarmed e Pulses when a FIRE zone has a trouble condition e Pulses when the armed status changes and the AC power is off e Beeps 3 times for trying to arm with the READY light off if FORCE ARMING has not been selected e Beeps 1 second for the CHIME feature e Beeps 1 second at the end of the exit delay e Beeps to indicate telephone line fault if selected e Beeps during an exit delay beeps rapidly for the last 10 seconds of an exit delay if selected e Pulses when one or more of the following conditions
33. ut an alarm Step 4 To toggle between the STAY and NIGHT mode double press the key corresponding to the mode you desire Step 5 To upgrade from the STAY or NIGHT mode to the AWAY mode double press AWAY Note Once the AWAY mode is activated the system must be disarmed to revert to the STAY or NIGHT mode e The LCD display will read Instant meaning the entry exit System Armed doors do NOT have an entry delay Instant Using the Quick Arm optional The Quick Arm feature may be used if it is enabled Quick Arm will allow the user to arm the security system in the AWAY STAY NIGHT modes by pressing the corresponding AWAY STAY NIGHT key twice This feature is used for ARMING ONLY and will not disarm the security system This is ideal for a maid or baby sitter etc NX 1248E User manual Page 9 04 10 04 Networ 9 Changing modes while system armed optional Double pressing the AWAY STAY or NIGHT key will change to the corresponding mode Once the AWAY mode is entered the system must be disarmed to change modes IMPORTANT The instant message needs to be off if you plan on re entering the building otherwise you will create an alarm You may re initiate an entry exit delay by pressing the STAY key again The instant message will go out Disarming the system When you enter the protected area through one of the designated Entry Exit doors the keypad control will sound a continuous tone for the durat
Download Pdf Manuals
Related Search