Home

Instruction Manual - Test Equipment Depot

1. After trying the above suggestions should the problem still persist contact your dealer for additional suggestions before contacting TV One Should the dealer s technical personnel be unable to assist you contact TV One via our support website http tvone crmdesk com Create a technical support request on the site and our support team will respond within a short period of time 7 0 LIMITED WARRANTY LIMITED WARRANTY With the exceptions noted in the next paragraph TV One warrants the original purchaser that the equipment it manufactures or sells will be free from defects in materials and workmanship for a period of two years from the date of purchase Should this product in TV One s opinion prove defective within this warranty period TV One at its option will repair or replace this product without charge Any defective parts replaced become the property of TV One This warranty does not apply to those products which have been damaged due to accident unauthorized alterations improper repair modifications inadequate maintenance and care or use in any manner for which the product was not originally intended Items integrated into TV One products that are made by other manufacturers notably computer hard drives and liquid crystal display panels are limited to the term of the warranty offered by the respective manufacturers Such specific warranties are available upon request to TV One If repairs are necessary under this warran
2. HDMI v1 2 HDCP 1 1 1080p 24fps 30fps 480i p 576i p 720p 1080i VGA amp SVGA 60 72 XGA 60 70 RGB 24 Bit 4 4 4 YUV 4 4 4 YUV 4 2 2 1 5Gbps Less than 1ms 256 Bit AEC Based Algorithm Unicast Mode All HDMI V1 3 Embedded Audio Signals Licensed MIMO 1080p 24fps 30fps 20 meters 65 ft EDID and CEC in Unicast Mode 1x Infrared Remote Control NEC Code 36 36KHz Range 0 to 40 C 432 to 104 F 10 to 90 Non condensing 10 to 70 C 12 to 158 F 10 to 90 Non condensing 2 Years Parts and Labor FCC CE RoHS UL CUL CE PSE GS RoHS 33 5x162 5x164 5mm 1 3x6 4x6 48 348g 0 77 Ibs 316g 0 70 Ibs 2x 5VDC 2 6A Locking DC US UK or Euro HDMI Wireless Transmitter HDMI Wireless Receiver 4 Test Equipment Depot 800 517 8431 99 Washington Street Melrose MA 02176 TestEquipmentDepot com 3 0 CHECKING PACKAGE CONTENTS Before attempting to use this unit please check the packaging and make certain the following items are contained in the shipping carton e 1x Transmitter and 1x Receiver unit 2x Power Adapter 1x Operations Manual 1x Remote Control IR Blaster Cable Assembly 2x Device Holders Note Please retain the original packing material should the need ever arise to return the unit If you find any items are missing contact your reseller or TV One immediately Have the Model and Serial Number and Invoice available for reference when you call 4 0 CONNECTING THE H
3. ARDWARE Please study the panel drawings below and become familiar with the signal input outputs power requirements inputs plus any controls present 4 2 1T CT 691 Transmitter Z WOH E IWOH GVONETASK 1T CT 691 WIRELESS HDMI TRANSMITTER aisya ul w KY 1 Connect up to 3 HDMI sources to the HDMI IN connectors of the 1T CT 691 Transmitter using appropriate HDMI cables 2 Connect the first AC adapter to the unit and then to the AC source 4 3 1T CT 692 Receiver l no WOH CVONETASK 1T CT 692 WIRELESS HDMI RECEIVER O J07 1 Connect the HDMI OUT connector of the 1T CT 692 Receiver to the HDMI input of the remote display or other device using an appropriate cable 2 Connect the second AC adapter to the unit and then to the AC source Note The user is cautioned that it s very important that you verify that the HDMI source functions properly when connected directly to the HDMI display device before you attempt to use any of the extender system components Failure to do this introduces an unwanted variable that would then have to be resolved should the system not function as expected 5 0 OPERATING THE UNITS Once the connections have been made and power applied as explained above there are few operational requirements It is recommended however that the power on sequence be as follows HDMI over Wireless Transmitter HDM
4. I over Wireless Receiver HDMI sources and HDMI destination device in that order Note that only when in the Unicast Mode See 5 1 below are EDID and CEC features implemented Explanations of the operating modes and indicators are as follows 5 1 Unicast and Broadcast Modes The system is capable of transmitting in an encrypted mode This mode is called the Unicast mode and when in this mode only your 1T CT 692 Receiver will be able to view the content This is the only mode where HDCP High Definition Content Protection media may be transmitted and received The second mode is the Broadcast mode In this mode any WHDI Wireless High Definition Interface capable receiver within range will be able to view your unencrypted signal Because the HDCP rules do not allow indiscriminate distribution of a HDCP protected program any HDMI signal with HDCP protection that s input to the 1T CT 691 transmitter will not be connected to the RF stage of the device and therefore will not be viewable remotely For this reason you should always use the Unicast mode if there is any chance of HDCP content being present If your system does not work in the Broadcast mode it will most likely be because there is HDCP content present 5 2 1T CT 691 Transmitter Controls and Indicators Item 1 The IR remote sensor You should point the furnished remote control at the front of the 1T CT 691 in order to turn it on or off and to make HDMI input s
5. Test Equipment 99 Washington Street Depot Melrose MA 02176 Phone 781 665 1400 1 800 517 8431 Toll Free 1 800 517 8431 Instruction Manual 1T CT 690 Series Wireless HDMI Extender 1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 Table of Contents Introduction Specifications Checking Package Contents Connecting The Hardware Operating The Unit Troubleshooting Limited Warranty Regulatory Compliance Contact Information 10 11 11 12 Test Equipment Depot 800 517 8431 99 Washington Street Melrose MA 02176 TestEquipmentDepot com 1 0 INTRODUCTION Thanks for purchasing the 1T CT 690 Series Wireless HDMI Extender product from TV One The individual components of this HDMI over Wireless Extender system consist of the 1T CT 691 Transmitter and the 1T CT 692 Receiver which constitute a system used to transmit 24 bit RGB color 4 4 4 or HDMI1080p video plus embedded lossless audio at a data rate of 1 5Gbps The 1T CT 690 series extender can achieve open field signal distribution distances of up to 20 meters 65 feet for uncompressed 1080p 24fps 30fps signals Both the Transmitter and Receiver units feature the unique TV One task locking power connectors to enhance overall system mechanical security Our professional video conversion products have been serving the industry for over twenty years TV One offers a full line of high quality Seamless Switchers Video Scalers Up Down Cr
6. elections See Remote Control discussion below Item 2 Power Indicator This indicator will illuminate when the unit is receiving power Item 3 Link Status Indicator When the transmitter and receiver units are attempting to synchronize this indicator will blink rapidly When a signal path is detected and synchronization is in progress the indicator will blink slowly When the link is established and synchronization has been attained the indicator will glow steadily Item 4 5 6 The indicators show which of the 3 HDMI sources have been selected The indicator labeled 4 above is the indicator for HDMI source number 1 Indicator 5 above is the indicator for selection of HDMI source 2 and indicator labeled 6 shows that HDMI source 3 has been selected See discussion on Input button below Note The indicators associated with items 2 through 6 above are labeled with their individual function on the top of the 1T CT 691 Transmitter for your convenience Item 7 Power On Off This push button allows the user to turn the 1T CT 691 Transmitter on or off from the front panel Press it to turn the unit on and press again to turn the unit off Item 8 Input Selection This push button allows selection of the desired HDMI input signal Each time the button is pressed the next HDMI source is selected Once source number 3 has been selected the sequence repeats with number 1 being selected Indicators 4 5 and 6 show the status of t
7. he selection and provide visual feedback of the current selection Item 9 Force Sync This push button forces a synchronization of the 1T CT 691 Transmitter with the 1T CT 692 Receiver by pressing and holding the button for 2 seconds Performing this action will cause the unit to go through the synchronization procedure described above Item 9 performs another function It toggles between Unicast and Broadcast modes Pressing and holding this button for 10 seconds will force a change in transmission modes If the associated indicator item number 3 above the link indicator is glowing Green the system is in the Unicast mode If it is glowing Red the system is in the Broadcast mode Pressing and holding the button for 10 seconds will force the change from one mode to the other Please kindly press amp hold ID button on receiver as well after you finish set up on transmitter Note that operating the unit in the Broadcast mode means it cannot transmit HDCP media If you try to do this the link will appear to malfunction It also means there is no bi directional communications between the 1T CT 691 Transmitter and the 1T CT 692 Receiver so the EDID and CEC features will not function Finally it means there is no encryption and any WHDI receiver within range will be able to see the programming 5 3 1T CT 692 Receiver Controls and Indicators Item 1 The IR remote sensor You should point the furnished Remote control at the fron
8. oadcast mode Pressing and holding the button for 10 seconds will force the change from one mode to the other Please kindly press amp hold ID button on Transmitter as well Note that operating the unit in the Broadcast mode means it cannot transmit HDCP media If you try to do this the link will appear to malfunction It also means there is no bi directional communications between the 1T CT 691 Transmitter and the 1T CT 692 Receiver so the EDID and CEC features will not function Finally it means there is no encryption and any WHDI receiver within range will be able to see the programming 5 4 IR Remote Control An Infrared type Remote Control is furnished with the 1T CT 690 pan AN system It will control either the 1T CT 691 Transmitter or the 1T VY CT 692 Receiver To turn either unit On or Off point the remote a control device at the unit and press the Power button Pointing pressing and holding the ID button for 2 seconds will cause either unit to force a re synchronization Finally when used with the 1T CT 691 Transmitter pressing one of the 3 Input buttons will select that HDMI source for viewing remotely TRANSMITTER CR 67 J we 5 5 IR Blaster The IR Blaster is a standard accessory and is used to transmit a third party unit s IR control signals via the 1T CT 691 692 This allows a DVD or other device connected to the 1T CT 691 Transmitter to be controlled by its own IR Remote Control unit from the l
9. ocation of the 1T CT 692 Receiver The IR Blaster consists of a remote sensor connected to a mini plug via 6 2 meter cable that is connected to the 1T CT 691 Transmitter This in no way affects the CR 47 IR Remote Control capability of the 1T CT 691 692 as described in Section 5 4 Place the IR Blaster s Sensor over the IR Window of the DVD Player or other unit to be controlled remotely and plug the IR Blaster s Plug into the IR Blaster Jack on the 1T CT 691 Transmitter Point the DVD Player s IR Remote Control at the 1T CT 692 Receiver and control the connected DVD Player remotely Note that the IR Blaster only supports NEC Code in the 36 38KHz range which is compatible with many devices HDMI 2 HDMI 1 5VDC IR Blaster plug pin assignments Assignment Pi 1 5VDC Power 2 IR Signal 3 N C 6 0 TROUBLESHOOTING Other than faulty HDMI cables attempting to transmit HDCP protected signals in the Broadcast mode or attempting to use the product over too great a distance there are seldom problems with these HDMI Extender products If there is no image present at the remote location connect the display device directly to the source to make certain that the problem is not in the display If an image is present under those circumstances make certain the transmitter and receiver s are receiving power Next make certain your power supply connectors and the HDMI connectors are securely attached at both ends
10. ons to 1080p 24fps 30fps Uncompressed 1080p signal distribution up to 20 meters 65 feet 24 bit RGB 4 4 4 Video Architecture RGB Video Inputs of VGA amp SVGA 60 72 and XGA 60 70 Supported Supports Embedded HDMI v1 2 Lossless Digital Audio Compliant with HDMI v1 2 HDCP 1 1 specifications Supports all standard high definition inputs up to 1080P Video Encryption possible using 256 Bit AEC Based Algorithm Locking 5VDC Connectors for enhanced mechanical security 2 0 SPECIFICATIONS Video I O 1T CT 691 Tx HDMI Input 1T CT 692 Rx HDMI Output Supported Signals amp Protocols Industry Standards Video Performance Maximum Resolution HDTV Other Supported STV HDTV Res RGB Resolution Color Space Video Data Rate Link Latency Signal Encryption Audio Supported Embedded Digital RF Band 5 GHz Maximum Range 1T CT 691 692 Tx Rx System Special Features EDID and CEC Remote Control Remote Control Type IR Blaster Accessory IR Format Environmental Operating Temperature Operating Humidity Storage Temperature Storage Humidity Warranty Limited Warranty Regulatory Approvals 1T CT 691 1T CT 692 Power Supply Mechanical H W D 1T CT 691Tx 1T CT 692 Rx H W D Weight 1T CT 691 Transmitter 1T CT 692 Receiver Power Requirement External Power Supply Accessories Included 2x Power Adapter 1x User Manual Model Numbers 1T CT 691 1T CT 692 3x via HDMI Connector Switchable 1x via HDMI Connector
11. oss Converters Analog Digital Converters SD HD SDI HDMI DVI Format Converters Standards Converters TBC Frame Synchronizers Matrix Routing Switchers Signal Distribution Amplifiers and Cat 5 Transmission Systems 1 1 Liability Statement Every effort has been made to ensure that this product is free of errors TV One cannot be held liable for the use of this hardware or any direct or indirect consequential damages arising from its use It is the responsibility of the user of the hardware to check that it is suitable for his her requirements and that it is installed correctly All rights reserved No parts of this manual may be reproduced or transmitted by any form or means electronic or mechanical including photocopying recording or by any information storage or retrieval system without the written consent of the publisher TV One reserves the right to revise any of its hardware and software following its policy to modify and or improve its products where necessary or desirable This statement does not affect the legal rights of the user in any way All third party trademarks and copyrights are recognized The TV One logo TV One task and CORIO are the registered Trademarks of TV One All other trademarks are the property of their respective holders 1 2 Features The 1T CT 690 series of HDMI over Wireless systems have many features that enable them to perform in a superior manner Among these features you will find HDTV Resoluti
12. t 11 Test Equipment Depot 800 517 8431 99 Washington Street Melrose MA 02176 TestEquipmentDepot com
13. t of the 1T CT 692 in order to turn it on or off and to make HDMI input selections See Remote Control discussion below 8 Test Equipment Depot 800 517 8431 99 Washington Street Melrose MA 02176 TestEquipmentDepot com Item 2 Power Indicator This indicator will illuminate any time the unit is receiving power Item 3 Link Status Indicator When the transmitter and receiver units are attempting to synchronize this indicator will blink rapidly When a signal path is detected and synchronization is in progress the indicator will blink slowly When the link is established and synchronization has been attained the indicator will glow steadily Item 4 Power On Off This push button allows the user to turn the 1T CT 691 Transmitter on or off from the front panel Press it to turn the unit on and press again to turn the unit off Item 5 Force Sync This push button forces a synchronization of the 1T CT 691 Transmitter with the 1T CT 692 Receiver by pressing and holding the button for 2 seconds Performing this action will cause the unit to go through the synchronization procedure described above Item 5 performs another function It toggles between Unicast and Broadcast modes Pressing and holding this button for 10 seconds will force a change in transmission modes If the associated indicator item number 3 above the link indicator is glowing Green the system is in the Unicast mode If it is glowing Red the system is in the Br
14. ty policy the original purchaser must obtain a Return Authorization Number from TV One and return the product to a location designated by TV One freight prepaid After repairs are complete the product will be returned freight prepaid LIMITATIONS All products sold are as is and the above Limited Warranty is in lieu of all other warranties for this product expressed or implied and is strictly limited to two years from the date of purchase TV One assumes no liability to distributors resellers or end users or any third parties for any loss of use revenue or profit TV One makes no other representation of warranty as to fitness for the purpose or merchantability or otherwise in respect of any of the products sold The liability of TV One with respect to any defective products will be limited to the repair or replacement of such products In no event shall TV One be responsible or liable for any damage arising from the use of such defective products whether such damages be direct indirect consequential or otherwise and whether such damages are incurred by the reseller end user or any third party 8 0 REGULATORY COMPLIANCE The 1T CT 690 Series HDMI over Wireless Extender products have been tested for compliance with appropriate FCC and CE rules and regulations The Power Adaptor Supply has been tested for compliance with appropriate UL CUL CE PSE GS Rules Regulations and or Guidelines This Product and Power Adapter is RoHS Complian

Instruction Manual - Test Equipment Depot

Contents

Download Pdf Manuals

Related Search

Related Contents