Home

Philips HTS9810 User Guide Manual Pdf

1. e See the explanations of the above options in the following pages 4 Select a setting then press OK e To return to the previous menu press BACK To exit the menu press OPTIONS 36 EN anes From TheatreS ystem Manual com Manuals EasyLink This feature is only applicable if this unit is connected to HDMI CEC compliant TV device It enables all the linked devices response or react to certain commands simultaneously with one touch control Options Descriptions Auto Wake It wake ups your TV up TV automatically when you press PLAY to power up this unit and start disc play if a video disc is found in the disc compartment e To disable this feature select Off System Respond to standby Standby command from other HDMI CEC compliant TV devices e To disable this feature select Decline System Audio It enables this DVD Control Home Theatre unit to switch automatically to the audio input of the active device e To enable this feature select On Then proceed to Audio Input Mapping to scan and map all the connected devices Audio Input Map the audio input to Mapping the connected TV devices correctly to enable automatic switching of input source 1 Press OK to start scanning of devices 2 Select the audio input o map e g AUX1 nput AUX2 Input hen press P 3 Select the correct device that connected o this audio in
2. HDMI Audio When you connect this unit and TV with HDMI cable select the audio output setting for this connection On the sound is output through both your TV and this speaker system f the audio format on the disc is not supported it will be downmixed to two channel sound linear PCM e Off disable audio output from your TV The sound is only output hrough this speaker system Speakers Volume When all the speakers are not placed in an equal distance from the listening position change the volume level of the speakers so that for those placed closer to the listening position will not sound too loud e 1ms setting for every 30cm distance between the Speakers Delay When the centre or rear speakers are placed closer to the listening position than the front speakers set the delay time for these speakers so that the sound outputs from all speakers reach the listening position at the same time 1 To start press OK 2 Select a speaker in the menu then press lt P to set the delay time 3 Press OK to confirm and exit Tip speaker and the listening position 1 To start press OK 2 Select a speaker in the menu then press lt gt to adjust the volume level 3 Press OK to confirm and exit Tip e The test tone is emitted from the speaker while adjusting volume level Night Mode Make loud sound level softer and soft
3. If the JPEG photo is not recorded with an exif type file the actual thumbnail picture will not be shown on the display It will be replaced with a blue mountain thumbnail picture This unit can only display digital camera pictures according to the JPEG EXIF format typically used by almost all digital cameras It cannot display Motion JPEG and pictures in formats other than JPEG or sound clips associated with pictures Folders files exceed the supported file limit of this unit will not be displayed or played Control photo play 1 2 Play photo slideshow Use the remote control to control the photo Button Action lt Skip to the previous photo Skip to the next photo Rotate the photo clockwise lt gt lv Rotate the photo anti clockwise 200M Zoom in out e Play will pause while in zoom mode Stop play Play musical slideshow Play from USB device Play MP3 WMA music files and JPEG photo files simultaneously to create musical slideshow The MP3 WMA and JPEG files must be stored on the same disc or USB device This unit can only play view MP3 WMA WMV9 DivX Ultra or JPEG files that are stored on such devices 1 Play MP3 WMA music 2 avigate to the photo folder album and press II to start slideshow play 5 Slideshow begins and continues till the end of the photo folder or album 5 Audio co
4. OSD Language for details e If you connect this unit to a HDMI CEC compliant TV using a HDMI cable it switches automatically to the menu display language as per your TV setting Optimise wireless transmission After connecting the speakers and subwoofer you can adjust the wireless settings to optimise the wireless performance e Before you start ensure that the left rear speaker and subwoofer are connected to the power outlets The wireless receiver is built into the left rear speaker and the transmitter is built into the subwoofer e For optimum wireless transmission ensure that there is no obstructions between the left rear speaker and subwoofer Press DISC Press OPTIONS 3 Press W to select Q Audio Setup in the menu then press PD Audio Setup Ambisound Setup Pair Receiver HDMI Audio Switch Channel EB Speaker Volume Speaker Delay LJ Night Mode eo o0 4 Select Wireless gt Pair Receiver then press OK Un Press and hold CONNECT on the left rear speaker to start pairing the receiver to the transmitter 5 The light flashes while in pairing mode 4 A confirmation message is displayed once the pairing process is complete e Pairing has to be done within 30 seconds and audio is muted during this process M REAR LEFT oe KA bo E i v 2 B 6 Press OK to confirm and exit 2 oO Chan
5. from the AUDIO IN AUX2 or AUX3 sockets on the subwoofer to the AUDIO OUT sockets on the device Note e To listen to the audio output from this connection press AUX DI MP3 LINK repeatedly until AUX2 INPUT or AUX3 INPUT is displayed on the display panel 16 EN 1 Connect a coaxial cable not supplied from the COAXIAL DIGITAL IN socket on the junction box to the COAXIAL DIGITAL OUT socket on the device Note e To listen to the audio output from this connection press AUX DI MP3 LINK repeatedly until DIGITAL INPUT is displayed on the display panel or 1 Connect an optical cable not supplied from the OPTICAL DIGITAL IN 1 or 2 socket on the junction box to the OPTICAL OUT socket on the device Note e To listen to the audio output from this connection press AUX DI MP3 LINK repeatedly until OPTICAL 1 INPUT or OPTICAL 2 INPUT is displayed on the display panel Connect portable media player Mount the DVD Home Theatre unit Z To ui Caution e Risk of personal injury and damage to the unit Allow only qualified persons to mount the unit v S 1 Pul up the catch to remove the main unt U rear cover 1 Connect a 3 5mm stereo audio cable supplied from the MP3 LINK socket on this unit to the phone socket on your portable media player such as MP3 player Note e To listen to the audio output from this connection p
6. Espa ol Fran ais Italiano v CE Stop Exit Change Select 3 Selecta language for on screen display then press P 0000 0 0 A welcome message is displayed EN 19 English Get started eae From TheatreS ystem Manual com Manuals Welcome The next few steps will help you set up your Home Theater System to match your listening environment To optimize the Ambisound surround effect for your home please begin with this simple setup Continue a Stop Exit To skip the Ambisound setup press Il to exit 4 Press to continue 5 Room Acoustics menu is displayed Room Acoustics Please select the type of walls that surround your room Hard Concrete wood O Soft Curtains open space Back Change Select 5 Select the condition of the room then press Db gt Rear Speaker Placement menu is displayed Rear Speaker Placement Select the placement of the rear speakers in your room Against both wall lt 0 5m gg gt Against both wall gt 0 5m Against side wall gt 0 5m Against back wall gt 0 5m e Back Change o gt Select 20 EN 6 Select the rear speakers placement in the room then press P 7 The speaker setting is complete press to exit This DVD Home Theatre unit is now ready for use e To change the menu display language see chapter Adjusting settings General setup gt
7. sound level louder so that you can watch the DVD movies at a low volume without disturbing others e On for quiet viewing at night DVDs only Off enjoy surround sound with a full dynamic range EN 39 English Adjust settings endai From TheatreSystem Manual com Manuals 40 Wireless Set up the wireless system for the rear speakers to enable audio output in multichannel mode e Pair Receiver pair the receiver in the left rear speaker with the transmission signal code of the transmitter in the subwoofer 1 To start press OK 2 Press CONNECT on the left rear speaker for 3 seconds 3 When pairing process is complete press OK to confirm and exit Switch Channel switch to another frequency channel to minimise interference with other wireless devices in the room Video setup Press OPTIONS General Setup menu is displayed Press W to select GJ Video Setup then press Dp Select an option then press OK Video Setup TV Type TV Display Picture Settings Advanced Picture Options Descriptions Auto t selects the best channel to operate automatically Channel A Frequency corresponding o Wi Fi channel 1 Channel B Frequency corresponding to Wi Fi channel 6 Channel C Frequency corresponding to Wi Fi channel 11 EN e See the explanations of the above options in the followin
8. 1 2 INPUT DIGITAL INPUT or MP3 LINK that corresponds to the socket you used to connect the external device INFO e Display the current status or disc information e Display photo files in 12 thumbnails view OPTIONS e Access or exit Options menu this menu provides various setting options Pill Play Pause e Start or pause disc play e RADIO start auto radio installation only available for first time setup E Stop e Stop disc play e RADIO erase the current preset radio station TREBLE BASS e Switch to treble or bass mode Then press VOL to set its level setting AUDIO SYNC e Select an audio language channel e Press and hold to access audio sync setting Then press VOL to set the audio delay time e RADIO toggle between FM stereo and mono mode SOUND e Select a predefined sound effect Q REPEAT PROGRAM e Select various repeat or shuffle modes turns off repeat or shuffle mode e RADIO press this button to start manual radio preset e RADIO press and hold this button to start automatic radio preset CINEMA LIGHTS e Tum on off the lights on the speaker stands to create the cinema ambiance if the cinema light is enabled e Press and hold to enable or disable cinema lights feature OK Confirm an entry or selection Cursor buttons A V lt gt e Navigate through the on screen menu Press left or right for fast backward or forward s
9. Corporation and is intended for home and other limited viewing uses only unless otherwise authorised by acrovision Corporation Reverse engineering or disassembly is prohibited 2 Your product Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your product at www philips com welcome This DVD Home Theatre is designed to complement your home perfectly Enjoy the DVD Home Theatre with 9 1 multi channel surround sound and excellent picture quality Features highlight Video upscaling to 1080p You can now watch the DVDs in the highest picture quality available for your HDTV This DVD Home Theatre offers full high definition video playback up to 1080p resolution for an amazing viewing experience A highly detailed picture and increased sharpness delivers a more rue to life picture EasyLink EasyLink uses the HDMI CEC Consumer Electronics Control industry standard protocol o share functionality with all HDMI CEC compliant devices over HDMI It enables the connected devices to control each other with a single remote control Note e Philips does not guarantee 100 interoperability with all HDMI CEC devices neue From TheatreS ystem Manual com Manuals Ambisound Philips Ambisound technology reproduces multi channel surround sound with fewer speakers to give an embracing surround experience without the hassle of setting up a full
10. Lock Password and Parental settings remain unchanged 44 EN Tendai From TheatreSystem Manual com Manuals endai From TheatreSystem Manual com Manuals 8 Additional information Update software Philips provides software updates to ensure that this unit is compatible with the newest formats To check the updates compare the current software version of this unit with the latest software version available at the Philips website 1 Press OPTIONS Preference Setup Disc Menu v Parental nd gt PBC MP3 JPEG Nav Password DivX Subtitle Version Info Default 2 Select Preference Setup gt Version Info then press OK 3 Write down the version number then press OPTIONS to exit the menu 4 Goto www philips com support to check he latest software version available for this unit 5 Ifthe latest software version is higher than he software version of this unit download it and store onto a CD R or USB flash drive 6 Connect the software update cable supplied between SOFTWARE UPDATE socket on the left rear speaker and subwoofer 7 Insert the CD R or USB flash drive to this unit 8 Press DISC or USB then follow the instruction on the TV to confirm update operation Note Do not remove the CD R or USB when software updating is in progress O Once software update is complete this unit turns off to standby automatical
11. MP3 LINK repeatedly until AUX SCART is displayed on the display panel This type of connections provide good picture quality 1 Unwind the DC cable from the main unit and connect It to the TO MAIN UNIT socket on the junction box Once complete close the main unit rear cover 2 Connect interconnect cable between TO SUBWOOFER socket on the junction box and TO JUNCTION BOX socket on the subwoofer EN 13 aaa From TheatreS ystem Manual com Manuals English Connect Connect rear wireless speakers Connect front and centre speakers to subwoofer REAR 14 Connect the cable from the right rear speaker to the left rear speaker socket Connect the power cord from the left rear speaker to the power outlet when all the required connections are complete EN endai From TheatreSystem Manual com Manuals FRONT FRONT CENTER RIGHT LEFT a ja B oe at mr Eod ot 3 RIGHT CENTER LEFT Od Odd a 1 Connect the centre left front and right front speakers to the matching sockets on the subwoofer Note e Ensure that the front portion of the plug is fully inserted into the socket e To disconnect the Ambisound speakers press down the catch on the plug before pulling out Connect subwoof
12. Om apparaten anv nds p annat s tt n i denna bruksanvisning specificerats kan anv ndaren uts ttas f r osynlig laserstr lning som verskrider gr nsen f r laserklass 1 Observera St mbrytaren r sekund rt kopplad och bryter inte str mmen fr n n tet Den inbyggda n tdelen r d rf r ansluten till eln tet s l nge stickproppen sitter i v gguttaget SF Luokan 1 laserlaite Varoitus Laitteen k ytt minen muulla kuin t ss k ytt ohjeessa mainitulla tavalla saattaa altistaa k ytt j n turvallisuusluokan 1 ylitt v lle n kym tt m lle lasers teilylle Oikeus muutoksiin varataan Laite ei saa olla alttiina tippu ja roiskevedelle Huom Toiminnanvalitsin on kytketty toisiopuolelle eik se kytke laitetta irti s hk verkosta Sis nrakennettu verkko osa on kytkettyn s hk verkkoon aina silloin kun pistoke on pistorasiassa NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause h
13. be recorded with ratings 1 To start press OK 2 Select a rating level in the menu then press OK 3 Press the number buttons to enter your 4 digit password Rated DVDs above the level you set in Parental require a password to be played The ratings are country dependent To allow all discs to play select 8 Some DVDs have ratings printed on them but are not recorded with ratings This function has no effect on such DVDs Ea To set or change your password go to Preference Setup gt Password PBC For VCDs SVCDs recorded with PBC playback control you can access the disc contents through an interactive menu On an index menu is displayed when you load a disc for play Off skip the menu and start play from the first title MP3 JPEG Nav Turn off or on MP3 WMA folder display when you play a media that contains MP3 WMA files With Menu display the folders of MP3 WMA files Without Menu display all the files Password Follow the instructions on the TV to set or change the password for locked discs and play restricted DVDs Change Password Old Password New Password Confirm PWD OK 1 Press the number buttons to enter 0000 or your last set 4 digit password at Old Password field 2 Enter the new password at New Password field 3 Enter the new passwo
14. connected device then e Press DISC to switch to DISC mode press OK e Press USB to switch to USB mode e Press RADIO to switch to FM band e Press AUX DI MP3 LINK repeatedly to select other external devices e Repeat steps 8 9 to map other connected devices 1 0 To exit the menu press OPTIONS Display Device connected to AUX SCART SCART OUT socket AUX1 INPUT AUDIO IN AUX1 sockets AUX2 INPUT AUDIO IN AUX2 sockets AUX3 INPUT AUDIO IN AUX3 sockets OPTICAL 1 OPTICAL DIGITAL IN 1 INPUT socket OPTICAL 2 OPTICAL DIGITAL IN 2 INPUT socket DIGITAL COAXIAL DIGITAL IN INPUT socket MP3 LINK MP3 LINK socket 24 EN dai From TheatreSystem Manual com Manuals 5 Play Play from disc Playable discs VIDEO DVD Video Region 2 Europe e Region 5 Russia DVD RW DVD Rewritable 22 ze aw DVD R DVD Recordable DVD R DL DVD R Double Layer DVD R DL SE CD RW CD Rewritable ReWritable diet CD R CD Recordable COMPACT Audio CD Compact Disc Digital Audio DIGITAL AUDIO COMPACT Video CD cli B e Formats 1 0 1 1 2 0 DIGITAL VIDEO diet Super Video CD SUPER VIDEO e DVDs and DVD players are designed with regional restrictions Ensure that the DVD video you play is for the same region zone as your player indicated on its rear English e This unit can support playback
15. delivers high quality picture and sound quality completely free from noise HDMI is fully backward compatible with DVI As required by the HDMI standard connecting o HDMI or DVI products without HDCP High bandwidth Digital Content Protection will result in no Video or Audio output HDCP High bandwidth Digital Content Protection is a specification that provides a secure transmission of digital contents between different devices to prevent unauthorised copyright endai From TheatreSystem Manual com Manuals JPEG A very common digital still picture format A still picture data compression system proposed by the Joint Photographic Expert Group which features small decrease in image quality in spite of its high compression ratio Files are recognised by their file extension JPG or JPEG MP3 A file format with a sound data compression system MP3 is the abbreviation of Motion Picture Experts Group 1 or MPEG 1 Audio Layer3 By using the MP3 format one CD R or CD RW can contain about 10 times more data than a regular CD Files are recognised by their file extension MP3 MPEG Motion Picture Experts Group A collection of compression systems for digital audio and video WMA Windows Media Audio Refers to an audio compression technology developed by Microsoft Corporation WMA data can be encoded by using Windows Media Player version 9 or Windows Media Player for Windows XP Files ar
16. effect PHILIPS 1 Press SOUND repeatedly to select a sound effect that most suits the video or music you play Video Descriptions Music ACTION Enhanced low and high ROCK range for great sounding movie effects and atmosphere Great for action movies and rock pop music DRAMA Clear mid and high range JAZZ Recreates the atmosphere of a live club with the artist just in front of you Good for Jazz music and watching dramas CONCERT Flat and pure sound mode CLASSIC deal for listening to classical music and watching live concert DVDs GAMING Slightly enhanced low range PARTY and strong mid range ideal for party music and video gaming SPORTS Moderate mid range and surround effects for clear vocals and the atmosphere of a live sports venue NEWS Enhanced mid range for clear vocals speech pee From TheatreS ystem Manual com Manuals EN 35 English Adjust sound 7 Adjust settings This section describes the various setting options of this unit Symbol Options Y General Setup Q Audio Setup Ld Video Setup a Preference Setup General setup 1 Press OPTIONS 5 General Setup menu is displayed 2 Press gt 3 Select an option then press OK General Setup EasyLink Yi Disc Lock Q Display Dim OSD Language Screen Saver Sleep Timer ta Standby Mode DivX R VOD Code
17. of the following file formats MP3 WMA JPEG DivxX WMV 9 e About WMV 9 this unit only supports Main Profile low level and Simple Profile Advanced Profile and DRM protected video files are not supported Play Play a disc Caution e Never place any objects other than discs into the disc compartment e Ensure ample space is available at the right hand side for ease of disc handling 1 Insert a disc with its label facing out e For double sided disc load the side to play faces out e To view disc play tum on the TV to the correct viewing channel for this DVD Home Theatre unit 2 To stop disc play press Hl 3 To remove the disc press 2 E e Ifthe password entry menu is displayed you have to enter the 4 digit password before it can be played e Screen saver displays automatically if the disc play is stopped for about 15 minutes To wake up from screen saver press DISC e This unit automatically switches to standby mode if you do not press any buttons within 30 minutes after a disc has stopped playing e The cinema lights on the speaker stands will gradually turn off when you start movie play To turn it on press CINEMA LIGHTS Tendai From TheatreSystem Manual com Manuals EN 25 Play video Change video play Nise 1 Play a title e For video disc playback always resumes from the point where it was last stopped To start playback from the beginning press I whi
18. range of speaker systems English USB direct and MP3 link Simply plug your USB device into the USB socket to play your MP3 WMAV JPEG Divx files or plug your portable media player to the MP3 LINK socket to enjoy the music play in superb sound quality Your product Sync the audio output with the video play This DVD Home Theatre provides you the feature of delaying the audio output if the video signals that go directly to the TV is slower than the audio streams Region codes DVD movies are usually not released at the same time in all regions of the world thus all DVD players are programmed to a specific region code Countries DVD region code EN 7 Denai From TheatreSystem Manual com Manuals Product overview Remote control MP3 LINK I USB RADIO AUX DI CINEMA J OPTIONS AMBISOUND TREBLE 8 O PHILIPS HOME THEATER SYSTEM OO e Tum on this unit or tum off to standby mode e Press and hold to turn off this unit and all the HDMI CEC compliant TV devices for EasyLink control only 4 Eject e Eject or pull in the disc Source buttons e DISC switch to DISC mode While in disc mode access or exit disc menu e USB switch to USB mode e RADIO switch to FM band e AUX DI MP3 LINK switch to AUX SCART AUX 1 2 3 INPUT OPTICAL
19. rear or bottom of the product for identification and supply ratings Before you make or change any connections ensure that all the devices are disconnected from the power outlet Place the unit You can place the main unit on top of a table or mount it on the wall 1 Place this DVD Home Theatre unit near to the TV 2 Place the speaker system as per the diagram shown above Find the most suitable placement based on your room layout and set up to ensure optimum sound performance 3 Place the subwoofer at the corner of the room or at least one metre away from the TV 4 Place the junction box behind the TV shelf or table e Use the supplied velcro strip for fixing purpose e Rear speakers are labelled as REAR LEFT RIGHT e Front speakers are labelled as FRONT LEFT RIGHT e To avoid magnetic interference or unwanted noise never place the speakers too close to the TV or any radiation devices e Install this unit near the AC outlet where the AC power plug can be easily reached EN 11 English Connect Connect video cables This section describes how to connect this DVD Home Theatre unit to your TV so to enable viewing of disc play Select the best video connection that your TV can support e Option 1 Connect to HDMI socket for a HDMI DVI or HDCP compliant TV e Option 2 Connect to scart socket for a standard TV Note e You must
20. CE This product complies with the radio interference requirements of the European Community This product complies with the requirements of the following directives and guidelines 2006 95 EC 2004 108 EC Recycle notice KEG HE Ph Hg Cd These symbols on the products packaging and or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste For proper treatment recovery and recycling of old products and used batteries please take them to applicable collection points in accordance with your national legislation and Directives 2002 96 EC and 2006 66 EC By disposing of these products and batteries correctly you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling For more information about collection and recycling of old products and batteries please contact your local municipality your waste disposal service or the point of sale where you purchased the items Copyright notice Be responsible Respect copyrights This product incorporates copyright protection echnology that is protected by method claims of certain U S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of his copyright protection technology must be authorised by Macrovision
21. MI CEC operations on your TV and other connected devices See TVs devices manual for details 2 You can now enjoy the EasyLink controls One touch play Auto Wake up TV When you press PLAY button this unit will wake up from standby mode and start disc play if a video disc is found in the disc compartment and it will also turn on your TV and switch to the correct viewing channel One touch power off System Standby When you press and hold STANDBY button it will turn off this unit and all the linked devices to standby This unit also responses to standby command from other HDMI CEC devices One touch audio input switching System Audio Control This unit is able to render the audio signals from the active source It switches automatically to the corresponding audio input and output the sound from its speaker system e Before you can enjoy this function you have to map the audio inputs to the connected devices You can use any HDMI CEC TV device remote control to adjust the volume Note e To enable one touch play function a video disc must be placed in the disc compartment before operation e Philips does not guarantee 100 interoperability with all HDMI CEC compliant devices Map the audio inputs to the connected devices Note e Before you start ensure that an audio connection has been made between this unit and your TV devices _ Press DISC N Pres
22. Register your product and get support at www philips com welcome DVD Home Theatre System HTS9810 Home Cin ma DVD 51 Cine en casa con DYD 97 DE DVD Home Entertainment System 143 DVD home theatre 189 endai From TheatreSystem Manual com Manuals PHILIPS anes From TheatreS ystem Manual com Manuals Important notes for users in U K Mains plug This apparatus is fitted with an approved 13 Amp plug To change a fuse in this type of plug proceed as follows 1 Remove fuse cover and fuse 2 Fix new fuse which should be a BS1362 5 Amp A S T A or BSI approved type 3 Refit the fuse cover If the fitted plug is not suitable for your socket outlets it should be cut off and an appropriate plug fitted in its place If the mains plug contains a fuse this should have a value of 5 Amp If a plug without a fuse is used the fuse at the distribution board should not be greater than 5 Amp Note The severed plug must be disposed off to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere How to connect a plug The wires in the mains lead are coloured with the following code blue neutral N brown live L e As these colours may not correspond with the colour markings identifying the terminals in your plug proceed as follows Connect the blue wire to the terminal marked N or coloured black Connect the brown wire to the terminal
23. TV frame ratio 16 9 Picture Settings Select a predefined set of picture colour settings or customise your personal setting Standard original colour setting Bright vibrant colour setting Soft warm colour setting e Personal customise the colour setting Set the level of brightness contrast tint and colour saturation in the menu then press OK Note e To adjust the above settings select an option and press OK Then press cursor left or right to change the value level setting and press OK to confirm Wide Screen Format define the wide screen format for disc play Options Descriptions Superwide Centre position of the screen is stretched less than the side This setting is only applicable if the video resolution is set to 720p or 1080i p 4 3 Pillar o stretching of the Box picture Black bars are displayed on both sides of the screen Off Picture will be displayed according to the format of the disc EN 41 English Adjust settings Note Preference Setup e This setting is only available if you have set the TV Display setting to 16 9 Wide Screen 1 Press OPTIONS General Setup menu is displayed HDMI Video select 3 video 2 Press V to select 88 Preference Setup resolution that is compatible with your then press gt TV display capability 3 Sele
24. armful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help DO Bore DIGITAL Manufactured under license from Dolby Laboratories Dolby Pro Logic and the double D symbol are trademarks of Dolby Laboratories Digital Surround Manufactured under license under U S Patent s 5 451 942 5 956 674 5 974 380 5 978 762 6 487 535 amp other U S and worldwide patents issued amp pending DTS and DTS Digital Surround are registered trademarks and the DTS logos and Symbol are trademarks of DTS Inc 1996 2007 DTS Inc All Rights Reserved ULTRA Divx DivX Ultra Certified and associated logos are trademarks of DivX Inc and are used under icense Official DivX Ultra Certified product Plays all versions of DivX video including DivX 6 with enhanced playback of Divx media files and the DivX Media Format Ay Plays Mg Nese Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and o
25. artment Close the cover Note Button Action AV Move up or down lt gt Move left or right Confirm a selection GEL Enter numbers ce long time remove the batteries 18 EN endai From TheatreSystem Manual com Manuals Find the correct viewing channel 1 Press C to turn on the DVD Home Theatre unit 2 Press DISC to switch to disc mode 3 Tum on the TV and switch it to the correct video in channel e You may go to the lowest channel on your TV then press the Channel Down button on your TVs remote control until you see the Video In channel You may press button repeatedly on your TVs remote control e Usually this channel is between the lowest and highest channels and may be called FRONT A V IN VIDEO etc Tip See TVs user manual on how to select the correct input on your TV Start Ambisound setup When you turn on this unit for the first time follow the instructions on the TV to complete he Ambisound setup in order to obtain the best possible surround sound effect e Before you start ensure that you have made all the required connections e Complete the Ambisound setup for this unit before you insert a disc to play Press DISC to switch to disc mode Turn on the TV and switch it to the correct video in channel Language menu is displayed OSD Language Please choose your language English Dansk Deutsch
26. connect this unit directly to a TV Option 1 Connect to HDMI socket 1 Before you connect remove the rear cover of the main unit by pushing it upwards and outwards 2 Connect a HDMI cable supplied from the HDMI OUT on this unit to the HDMI IN socket on your TV 12 EN paces From TheatreS ystem Manual com Manuals e The HDMI connector is only compatible with HDMI compliant TVs and DVI TVs Ea for details e This unit is HD HDMI see chapt details e Use a HDMI DV needed to comp e To route the aud e To optimise the video output see chapter Adjust settings gt Video Setup gt Advanced Picture CEC compatible It enables connected TV device to control each other over er Activate EasyLink control for adaptor in case your TV has only a DVI connection An extra audio connection is ete this connection io from your TV to this DVD Home Theatre unit connect an audio cable from the audio input on this uni to the audio output on your TV e This type of connections provide best picture quality Option 2 Connect to Scart socket Connect junction box 1 Connect a scart cable supplied from the SCART OUT socket on the junction box to the scart input socket on your TV Tip To listen to the audio output from your TV press AUX DI
27. ct an option then press OK Options Descriptions Auto It detects and selects the Preference Setup best supported video resolution automatically wi Audio Subtitle 480p 576p Select a video resolution Disc Mi 720p 1080i that best supported by Q tsc Menu 1080p your TV See your TVs Parental manual for details LJ als MP3 JPEG Nav Note gg Password DivX Subtitle v e Ifthe setting is not compatible with your TV a blank screen appears Wait for 15 seconds for auto e See the explanations of the above recover or press HDMI repeatedly until the picture options in the following pages appears 4 Selecta setting then press OK e To return to the previous menu press BACK To exit the menu press OPTIONS 42 EN peed From TheatreS ystem Manual com Manuals Audio Select the default audio language for DVDs Subtitle Select the default subtitle language for DVDs Disc Menu Select the menu language for DVDs If the language you have set is not available on the disc the disc uses its own default language For some DVDs the subtitle audio language can only be changed from the disc menu To select the languages that are not listed in the menu select Others Then check the Language Code list at the back of this user manual and enter the respective 4 digit language code Parental Restrict access to DVDs that are unsuitable for your children These types of DVDs must
28. e Adjust the volume level PII Play Pause e Start or pause disc play e RADIO start auto radio installation only available for first time setup AMBISOUND e Select different types of surround sound output 10 EN D 4 Eject e Eject or pull in the disc Display panel Right side panel 9 Disc compartment Left side panel MP3 LINK socket e To connect portable audio player gt USB socket e To connect USB flash drive USB memory reader or digital camera Tip e Control buttons on this DVD Home Theatre unit are operated through touch screen display The control displays will be dimly lit after one second of inactivity e To change the brightness of the touch screen display see chapter Adjust settings General Setup gt Display Dim endai From TheatreSystem Manual com Manuals 3 Connect This section describes the basic connections required for this DVD Home Theatre unit before it can be used Basic connections e Place the unit e Connect video cables Connect junction box Connect rear wireless speakers Connect front and centre speakers to subwoofer Connect subwoofer Optional connections e Connect audio cables other devices Connect audio from TV Connect audio from cable box recorder game console Connect portable media player Connect USB device Mount the DVD Home Theatre unit Note e Refer to the type plate at the
29. e picture appears EN 47 endai From TheatreSystem Manual com Manuals English Troubleshooting Sound No sound No sound on HDMI connection No sound from TV programmes Interference on rear wireless speakers or existing wireless network in your home No sound from rear wireless speakers Ensure that the audio cables are connected and press the correct input source for example AUX DI MP3 LINK USB to select the device you want to play You may not hear any sound from the HDMI output if the connected device is non HDCP compliant or only DVI compatible Ensure that the HDMI Audio setting is turned on Connect an audio cable from the AUDIO input on this unit to the AUDIO output on your TV Then press AUX DI MP3 LINK repeatedly to select the corresponding audio input source Switch to another frequency channel 1 Press OPTIONS 2 Select Audio Setup gt Wireless gt Switch Channel in the menu then press OK 3 Select a channel option then press OK Check if all the connections to the wireless speakers are properly connected and connect the power cable Press AMBISOUND to turn on the Ambisound mode See chapter Getting Started Optimise wireless transmission for proper wireless setup Play DivX video files cannot be played DivX subtitle are not displayed correctly The contents of the USB flash drive cannot be read 48 EN Ensure that the DivX
30. e recognised by their file extension WMA WMV Windows Media Video Refers to a video compression technology developed by Microsoft Corporation WMV content can be encoded by using Windows Media Encoder 9 series Files are recognised by their file extension WMV EN 49 English Glossary 50 EN aie From TheatreS ystem Manual com Manuals
31. earch e RADIO press up or down to tune the radio frequency e RADIO press left or right to start auto search endai From TheatreSystem Manual com Manuals BACK TITLE e Return to the previous display menu For DVD go to title menu 2 For VCD version 2 0 or SVCD with ir PBC turned on return to the menu during playback k PI Previous Next 3 e Skip to the previous or next title E chapter track amp e RADIO select a preset radio station 3 K Mute e Mute or restore the volume VOL e Adjust the volume level AMBISOUND e Select different types of surround sound output Numeric buttons e Enter a preset number or item to play SUBTITLE Select DVD or DivX subtitle language HDMI ANGLE e Select a video resolution setting for HDMI output e Press and hold to select a different viewing angle of a DVD movie ZOOM e Zoom in or out the picture on the TV EN 9 penis From TheatreS ystem Manual com Manuals Main unit vai Hy ma i i OOO OO e Turn on this unit or tum off to standby mode e Press and hold to turn on this unit from low power standby mode SOURCE e Select a play media DISC USB RADIO FM OPTICAL 1 2 INPUT DIGITAL INPUT AUX SCART AUX 1 2 3 INPUT or MP3 LINK E Stop e Stop disc play e RADIO erase the current preset radio station Volume control
32. em data the name of the radio station will be displayed Listen to radio 1 Press RADIO 2 Use the remote control to control the radio Button Action Select a preset radio station lt gt gt Tune the radio frequency backward forward Toggle between FM stereo and FM mono mode AUDIO SYNC Press and hold this button to delete the preset station from the preset list The preset number for other radio stations remain unchanged Reinstall all the radio stations 1 a Press RADIO E w 2 Press and hold PROGRAM until STARTING INSTALL is displayed 4 All previously stored radio stations will be replaced Note e If no stereo signal is detected or less than 5 stations are detected during radio installation CHECK ANTENNA is displayed Search and store radio stations individually 1 Press RADIO Press lt lt gt gt 5 The radio frequency indication starts to change until a radio station is detected Repeat step 2 until you tune to the radio station you wish to store To finetune the radio frequency press AV Press PROGRAM If no action is carried out within 20 seconds after the above step it exits the preset mode Press I Dl or the number buttons to select a preset number to store Press PROGRAM to confirm EN 33 6 Adjust sound Control the volume 1 Press VOL to increase or decrease the
33. er 1 Connect the FM antenna supplied to the FM75Q socket on the subwoofer for some models this cable has been connected Extend the FM antenna and fix Its ends to the wall 2 Connect the power cord when all the required connections are complete and you are ready to enjoy this DVD Home Theatre unit endai From TheatreSystem Manual com Manuals Connect audio cables other devices English This section describes how you can route the sound from other devices to this DVD Home Theatre unit in order to enjoy sound output or audio play with multi channel surround capabilities Connect Connect audio from TV also used for EasyLink control 1 Connect an audio cable not supplied from the AUDIO IN AUX1 sockets on the junction box to the AUDIO OUT sockets on your TV Note e To listen to the audio output from this connection press AUX DI MP3 LINK repeatedly until AUX1 INPUT is displayed on the display panel EN 15 penis From TheatreS ystem Manual com Manuals Connect audio from cable box recorder game console You can choose to connect to analogue or digital socket depending on the device capabilities Connect to analogue sockets Connect to digital optical socket OPTICAL COAXIAL DIGITAL IN COAXIAL DIGITAL OUT 1 Connect an audio cable not supplied
34. file is encoded according to the Home Theatre Profile with the DivX encoder Ensure that the DivX video file is complete Ensure that the subtitle file name is the same as the movie file name Select the correct character set See chapter Adjust Settings Preference Setup DivX Subtitle The USB flash drive format is not compatible with this unit Drive is formatted with different file system which is not supported by this unit e g NTFS aximum size of memory supported is 160GB paces From TheatreS ystem Manual com Manuals 10 Glossary Aspect ratio Aspect ratio refers to the length to height ratio of TV screens The ratio of a standard TV is 4 3 while the ratio of a high definition or wide TV is 16 9 The letter box allows you to enjoy a picture with a wider perspective on a standard 4 3 screen DivX The DivX code is a patent pending MPEG 4 based video compression technology developed by DivX Networks Inc that can shrink digital video to sizes small enough to be transported over the internet while maintaining high visual quality Dolby Digital A surround sound system developed by Dolby Laboratories containing up to six channels of digital audio front left and right surround left and right centre and subwoofer HDMI High Definition Multimedia Interface HDMI is a high speed digital interface that can transmit uncompressed high definition video and digital multichannel audio It
35. g pages Select a setting then press OK e To return to the previous menu press BACK To exit the menu press OPTIONS TV Type Change this setting only if the video does not appear correctly By default this setting matches the most common setting for TVs in your country e PAL for PAL system TV NTSC for NTSC system TV e Multi for TV that is compatible with both PAL and NTSC TV Display Select the screen format according to how you want the picture to appear on your TV Advanced Picture This is an advanced setting to optimise the video output This option is only applicable for video connection through HDMI or Component Video with Progressive Scan output Gamma Adjust picture intensity Positive values bring out the detail in dark scenes while negative values emphasise contrast Chroma Delay Adjust the colour of an image element pixel to produce a perfect and clear picture e True Life Increase the contrast 4 3 Pan Scan PS 4 3 Letter Box LB 16 9 Wide Screen and colour intensity to produce a more dynamic picture endai From TheatreSystem Manual com Manuals e 4 3 Pan Scan for standard TV a full height screen display with the sides trimmed e 4 3 Letter Box for standard TV a wide screen display with black bars on the top and bottom e 16 9 Wide Screen for wide screen
36. ge the frequency channel You can change the frequency channel of this wireless system if the transmission signal is interfering with other wireless devices networks in your home 1 2 3 4 Press OPTIONS then select 9 gt Audio Setup Select Wireless gt Switch Channel hen press OK Options Descriptions Auto It selects the best channel to operate automatically Channel A Frequency corresponding o Wi Fi channel 1 Channel B Frequency corresponding o Wi Fi channel 6 Channel C Frequency corresponding o Wi Fi channel 11 Press AV to select a setting then press OK To exit the menu press OPTIONS EN 21 neues From TheatreS ystem Manuatcom Manuals endai From TheatreSystem Manual com Manuals Adjust speakers output Ideally the distance between listening position and all the speakers should be the same If not change the speaker settings based on their distance from the listening position in order to obtain the best possible surround sound 1 Press DISC 2 Press OPTIONS 3 Press W to select Q Audio Setup in the menu then press P Audio Setup vi Ambisound Setup HDMI Audio Speaker Volume Speaker Delay Night Mode Wireless as ES e You cannot access speaker setup options if this Home Theatre unit is not in a complete stop mode In such case press ll twice To set the speakers
37. he MP3 LINK socket on this unit to the headphone socket on your Eg Tip portable media player e For better FM stereo reception connect an external 2 Press AUX DI MP3 LINK repeatedly until FM antenna not supplied MP3 LINK is displayed Position the antenna as far away as possible from your TV VCR or other radiation source to prevent 3 Start play on your portable media player unwanted interference e See chapter Adjust Sound to enhance the audio output First time tuning 4 To stop play press STOP button on your portable media player The first time when you access RADIO mode follow the instructions to install the radio Note stations e Control playback is only possible on your portable 1 Press RADIO i e eee 5 AUTO INSTALL PRESS PLAY is Stop play on the portable media player before you A switch to other play media source displayed 2 Press PI 4 All detected radio stations are stored 5 Once complete it tunes to the first preset radio station To stop auto tuning press Hl 32 EN adai From TheatreSystem Manual com Manuals endai From TheatreSystem Manual com Manuals e This unit can store up to a maximum of 40 radio stations If auto installation is not activated or less than 5 radio stations are stored AUTO INSTALL will be displayed again the next time you turn on to radio mode e Ifthe FM radio station transmits RDS Radio Data Syst
38. le the message is displayed Control a title 1 Play a title 2 Use the remote control to control the title Button Action Pause resume play Stop play Jump to the next title chapter Return to the beginning of the current title chapter or jump to the previous title chapter 2 Use the remote control to change the video play Button Action Change audio language e Only applicable to discs with multiple audio language or channel Change subtitle language Only applicable to discs with multiple subtitle language PROGRAM Toggle through various repeat shuffle play mode or turn off repeat mode e Repeat options vary depending on the disc type e For VCDs repeat play is only possible when the PBC mode is turned off Zoom in out e To pan through the zoomed image press the cursor buttons lt lt gt gt Search backward forward To change search speed Display current play status press this button repeatedly You can change the video play options here without AV Slow motion reverse forward interrupting disc play play To change play speed press ANGLE Press and hold to view DVD this button repeatedly play from different camera For VCD only forward play angles is possible Only applicable to DVDs that contain sequences recorded from different camera angles 26 EN anes From TheatreS ystem Ma
39. ly Note e We recommend that you disconnect the power cord for a few seconds and connect again to reboot the system Care Caution e Never use solvents such as benzene thinner cleaners available commercially or anti static sprays intended for discs Clean discs Wipe the disc with a micro fibre cleaning cloth from the centre to the edge in a straight line movement Clean main unit screen Wipe the screen surface with a micro fibre cleaning cloth EN 45 English Additional information Specifications Note e Specification and design are subject to change without notice Accessories supplied e Quick Start Guide e Remote control and batteries Scart cable e HDMI cable 3 5mm stereo audio cable Interconnect cable connect between junction box and subwoofer Software cable 2 power cables Subwoofer 1 centre 2 front and 2 rear speakers Junction box e Velcro tape to fix the junction box e FM wire antenna e Micro fibre cleaning cloth Amplifier Total output power Home Theatre 800W RMS 10 THD e Frequency response 20 Hz 20 kHz 3dB Signal to noise ratio gt 65 dB CCIR e Input sensitivity e AUX SCART amp AUX 1 500 mV AUX 2 amp 3 1000 mV e MP3 LINK 250 mV Disc Laser Type Semiconductor Disc diameter 12cm 8cm e Video decording MPEG1 MPEG2 Divx DivX Ultra WMV9 Video DAC 12 bits 148
40. m TheatreS ystem Manual com Manuals Quick skip play to a specific time 1 During playback press INFO 5 The disc status menu is displayed 2 Select the current elapsed playing time in the menu then press OK TT Time title time CH Time chapter time e Disc Time disc time Track Time track time 3 Press the number buttons to change the time where you want to skip to then press OK 28 EN Play DivX video DivX video is a digital media format that retains high quality despite a high rate of compression This unit is DivX Certified that allows you to enjoy DivX video 1 Insert a disc or USB that contains the DivX videos 2 Press DISC or USB A contents menu is displayed UJ Select a title to play then press PAI 4 Use the remote control to control the title Button Action Change subtitle language SUBTITLE E ae Ch dio track AUDIO STAG ange audio language trac Stop play e For DivX Ultra video press this button again to display the contents menu Display DivX Ultra video information gg e Only those DivX videos that were rented or purchased using the DivX registration code of this unit can be played see chapter Adjust settings gt General Setup gt DivX R VOD Code for details e Ifthe subtitle does not appear correctly change the subtitle language see chapter Adjust settings Preference Setu
41. marked L or coloured red e Do not connect either wire to the earth terminal in the plug marked E or e or coloured green or green and yellow Before replacing the plug cover make certain that the cord grip is clamped over the sheath of the lead not simply over the two wires Copyright in the U K Recording and playback of material may require consent See Copyright Act 1956 and The Performer s Protection Acts 1958 to 1972 Italia DICHIARAZIONE DI CONFORMITA Si dichiara che l apparecchio HTS9810 Philips risponde alle prescrizioni dell art 2 comma 1 del D M 28 Agosto 1995 n 548 Fatto a Eindhoven Philips Consumer Electronics Philips Glaslaan 25616 JB Eindhoven The Netherlands Norge Typeskilt finnes p apparatens underside Observer Nettbryteren er sekundert innkoplet Den innebygde netdelen er derfor ikke frakoplet nettet s lenge apparatet er tilsluttet nettkontakten For redusere faren for brann eller elektrisk st t skal apparatet ikke utsettes for regn eller fuktighet endai From TheatreSystem Manual com Manuals DK Advarsel Usynlig laserstr ling ved bning n r sikkerhedsafbrydere er ude af funktion Undg uts ttelse for str ling Bem rk Netafbryderen er sekund rt indkoblet og ofbryder ikke str mmen fra nettet Den indbyggede netdel er derfor tilsluttet til lysnettet sa l nge netstikket sidder i stikkontakten S Klass 1 laseraparat Varning
42. ntinues to play till the end of the disc 1 Connect USB flash drive or USB memory To return to the menu press BACK card reader to the gt USB socket on this unit UJ To stop slideshow play press Il 4 To stop music play press Ill again 2 Press USB A contents menu is displayed 3 Selecta file to play then press PAI For more information see chapters Play music Play photo Play video for details 4 To stop play press Ill or remove the USB device Ea e fthe device does not fit into the USB socket connect it through a USB extension cable e If a multiple USB card reader is used only one of the connected USB drive contents can be accessed e Ifa USB HDD is used ensure that an auxiliary power cord connected to the USB HDD for proper operations Digital cameras that use PTP protocol or require additional programme installation when connected o a PC are not supported EN 31 neue From TheatreS ystem Manual com Manuals English Play Play from portable media Play from radio player Check if the FM antenna has been connected to the subwoofer If not connect the supplied FM antenna to the FM 75Q socket and fix its ends to the wall Simply connect your portable media player e g MP3 player to this unit to enjoy superb sound quality from your music collections 1 Connect a 3 5mm stereo audio cable supplied from t
43. nual com Manuals Tendai From TheatreSystem Manual com Manuals Access DVD menu 1 Press DISC to access disc main menu 2 Select a play option then press OK e In some menus press number buttons to input your selection To return to the title menu during playback press TITLE Access VCD menu The PBC Playback Control for VCD is turned on by default in the factory When you load in a VCD the contents menu is displayed 1 Press AV to select a play option then press OK to start play If PBC is off it skips the menu and starts play from the first title e During playback you can press BACK to retum to the menu ifthe PBC mode is on Tip The default setting for PBC is on To change the default setting see chapter Adjust settings Preference Setup gt PBC for details Sync audio output with video play If the video play is slower than the audio output sound does not match with the pictures you can delay the audio output to match the video SK VOL AUDIO SYNC PHILIPS V 1 Press and hold AUDIO SYNC until AUDIO SYNC XXX is displayed e XXX denotes the delay time 2 Within five seconds press VOL to set the delay time for audio output Note e fthe volume control is not used within 5 seconds it resumes normal volume control function EN 27 English Play anes Fro
44. p gt DivX Subtitle for details e The subtitle can only be displayed up to an average of 45 characters e This unit can play DivX video files that are up to 4GB in size endai From TheatreSystem Manual com Manuals Play music Note e For some commercial audio disc playback may resume from the point where it was last stopped To start playback from first track press 4 Control a track Play a track 2 Use the remote control to control the track Button Action E Pause resume play Stop play ump to the next track Return to the beginning of the current track or jump to the previous track GEEL Direct input the track number Cc lt lt gt gt Search backward forward e To change search speed press this button repeatedly PROGRAM Toggle through various repeat shuffle play mode or turn off repeat mode e Repeat options vary depending on the disc type Play MP3 WMA music MP3 WMA is a type of highly compressed audio file files with mp3 or wma extensions 1 UJ Insert a disc or USB that contains the MP3 WMA music Press DISC or USB A contents menu is displayed Select a folder then press OK Select a track to play then press PAI To return to the main menu press A until Previous folder is selected then press OK For CDs recorded in multiple sessions only the first session is played Thi
45. p Timer Switch to standby automatically after the preset time e Off disable sleep mode 15 30 45 60 mins select the count down time before it switches to standby Standby Mode Set the standby mode Normal normal standby power consumption e Low Power low standby power consumption However it requires longer time to power up EN 37 Divx R VOD Code Display the DivX registration code Tip e Enter this unit s DivX registration code when you rent or purchase video from www divx com vod The DivX videos rented or purchased through the DivX VOD Video On Demand service can be played only on the device to which it is registered 38 EN aie From TheatreS ystem Manual com Manuals Audio setup 1 Press OPTIONS General Setup menu is displayed 2 Press W to select Q Audio Setup then press Db 3 Select an option then press OK Audio Setup Ambisound Setup v HDMI Audio EJ Speaker Volume Speaker Delay Night Mode Wireless Ba o0 4 Select a setting then press OK To return to the previous menu press BACK e To exit the menu press OPTIONS endai From TheatreSystem Manual com Manuals Ambisound Setup Change the Ambisound setup by selecting the room environment and rear speakers placement Tip See chapter Get Started Start Ambisound setup for detailed information
46. put hen press OK Note e Your TV and other connected devices must be compliant with HDMI CEC e You must turn on the HDMI CEC operations on your TV devices before you can enjoy the EasyLink controls See your TVs devices manual for details e Philips does not guarantee 100 interoperability with all HDMI CEC compliant devices Disc Lock Set play restriction for a specific discs Before you start place the disc in the disc compartment maximum 40 discs can be locked e Lock restrict access to the current disc The next time you want to play this disc or unlock it you need to enter the password e Unlock all discs can be played Tip e To set or change your password go to Preference Setup gt Password noua From TheatreS ystem Manual com Manuals Display Dim Change the brightness level of the display panel to suit the lighting in your room e 100 normal brightness e 70 medium brightness e 40 dimmest display English OSD Language Select the default on screen menu language Adjust settings Screen Saver Turn off or on the screen saver mode It helps to protect the TV screen from being damage due to over exposure to a static image for too long On set the screen saver to appear after 15 minutes of inactivity for example in pause or stop mode e Off disable screen saver mode Slee
47. r other countries CLASS 1 LASER PRODUCT Tendai From TheatreSystem Manual com Manuals HDMI and HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC USB The USB IF Logos are trademarks of Universal Serial Bus Implementers Forum Inc byFAROUDJA DCDi is a trademark of Faroudja a division of Genesis Microchip Inc ENERGY STAR and the ENERGY i Gregg STAR mark are registered U S marks LASER e Type Semiconductor laser GaAlAs Wave length 650 660 nm DVD 784 796 nm CD 1 46 mW DVD 160 uW CD 60 degrees Output Power Beam divergence endai From TheatreSystem Manual com Manuals Contents 1 Important 6 Safety and important notice 2 Your product 7 Features highlight 7 Product overview 8 3 Connect 11 Place the unit 11 Connect video cables 12 Connect junction box 13 Connect rear wireless speakers 14 Connect front and centre speakers to subwoofer 14 Connect subwoofer 15 Connect other devices 15 Mount the DVD Home Theatre unit 17 4 Get started 18 Prepare the remote control 18 Find the correct viewing channel 19 Start Ambisound setup 19 Optimise wireless transmission 21 Adjust speakers output 22 Activate EasyLink control 23 Select a play source 24 5 Play 25 Play from disc 25 Play video 26 Play music 29 Play photo 30 Play from USB device 31 Play from por
48. rd again at Confirm PWD field 4 Press OK to exit the menu Note e If you forget your 4 digit password enter 0000 before you set a new password Tendai From TheatreSystem Manual com Manuals EN 43 English Adjust settings DivX Subtitle Select a character set that supports the DivX subtitle Standard English Irish Danish Estonian Finnish French German Italian Portuguese Luxembourgish Norwegian Bokmal and Nynorsk Spanish Swedish Turkish Central Polish Czech Slovak Europe Albanian Hungarian Slovene Croatian Serbian Latin script Romanian Cyrillic Belarusian Bulgarian Ukrainian Macedonian Russian Serbian Ensure that the subtitle file has the exact same file name as the movie file If for example the filename of the movie is Movie avi then you will need to name the text file Movie sub or Movie srt e Greek and Hebrew languages can be download from Philips website see chapter Update software However it overrides the Cyrillic language from the list Version Info Display the software version of this unit Tip This information is required when you want to find out if a newest software version is available at the Philips website that you may download and install on this unit Default Reset all the settings of this unit to factory default except for Disc
49. ress AUX DI MP3 LINK repeatedly until MP3 LINK is displayed on the display panel Connect USB device 2 Remove the screws and detach the DVD Home Theatre stand 3 Place two screws on the wall e The distance between two screws is 15cm 4 Hook the DVD Home Theatre unit firmly onto the screws slide through the key holes to lock into position 1 Connect the USB device to lt gt USB socket on this unit Note This DVD Home Theatre unit can only play view MP3 WMA WMV9 DivX Ultra or JPEG files that are stored on such devices e To listen to the audio output from this connection press USB EN 17 Tendai From TheatreSystem Manual com Manuals peed From TheatreS ystem Manual com Manuals 4 Get started Prepare the remote control Control a play source 1 Select the source you wish to control by pressing the DISC USB RADIO or AUX DI MP3 LINK button Then select the desired function for example I Pl Navigate through the menu 1 Point the remote control directly at the remote sensor on this unit and select the desired function Use the following buttons on the remote control to navigate through the on screen menus UJ e Ifyou are not going to use the remote control for a Push to open the battery compartment cover Insert two batteries type RO3 or AAA Match the indications inside the battery comp
50. s OPTIONS 5 General Setup menu is displayed UJ Press 4 Select EasyLink then press General Setup EasyLink Disc Lock Q Display Dim Ld a Oo Auto Wake up TV System Standby System Audio Control OSD Language Audio Input Mapping Screen Saver Sleep Timer Standby Mode DivX R VOD Code e Auto Wake up TV and System Standby functions are turned on by default in the factory 5 Select System Audio Control gt On then press OK 6 Select Audio Input Mapping then press OK EN 23 English Get started 7 Select OK Jin the menu then press OK Select a play source to start scanning of devices 5 Once complete audio input mapping menu is displayed On the main unit Audio Input Mapping AUX1 Input TV Ti AUX2 Input Other non HDMI nap AUX3 Input Digital Input a 1 Press SOURCE repeatedly to select DISC gt USB gt RADIO FM gt OPTICAL 1 2 INPUT gt DIGITAL INPUT gt AUX For example if your TV audio is SCART gt AUX 1 2 3 INPUT gt connected to the AUX IN AUX 1 MP3 LINK gt DISC sockets on this unit select AUX1 Input and map with the TV brand On the remote control name at the right panel 8 Select the audio input of this unit that is used to connect to other HDMI device e g AUX1 Input AUX2 Input then press gt re 9 Select the correct
51. s unit does not support MP3PRO audio format If any special characters are present in the MP3 track name ID3 or album name it might not be displayed correctly on the screen because these characters are not supported Some WMA is protected by Digital Rights Management DRM it cannot be played on this unit Folders files exceed the supported file limit of this unit will not be displayed or played E To display the data disc contents without folders see chapter Adjust settings Preference Setup gt MP3 JPEG Nay for details EN 29 English Play Play photo Play photos as slideshow This unit can play JPEG photos files with jpeg or jpg extensions 1 Insert a disc or USB that contains the JPEG photos 2 Press DISC or USB L gt For a Kodak disc the slideshow begins automatically L gt For a JPEG disc the photo menu is displayed 3 Select the folder album you want to play To preview the photos in the folder album press INFO e To go to previous or next screen display press kt Pl e To select a photo press the cursor buttons e To display the selected photo only press OK 4 Press PI to start slideshow play To return to the menu press BACK 30 EN ume From TheatreS ystem Manual com Manuals It may require longer time to display the disc contents on the TV due to the large number of songs photos compiled onto one disc
52. table media player 32 Play from radio 32 6 Adjust sound 34 Control the volume 34 Adjust Bass Treble 34 Select Ambisound 34 Select a preset sound effect 35 7 Adjust settings 36 General setup 36 Audio setup 38 Video setup 40 Preference Setup 42 8 Additional information 45 Update software 45 Care 45 Specifications 46 9 Troubleshooting 47 10 Glossary 49 EN 5 English Contents eaa From TheatreSystem Manual com Manuals 1 Important Safety and important notice Risk of fire or electric shock e Ensure that air can circulate freely through the ventilation holes on this unit Allow at least 5 10 cm clearance around the unit Never expose this unit to direct sunlight naked flames or heat Never place this unit on other electrical equipment Keep away from this unit during lightning storms Never remove the casing of this unit Please leave all maintenance work to qualified personnel Keep this unit away from water moisture and liquid filled objects Caution Remove batteries if they are exhausted or if the remote control is not to be used for a long time Do not mix batteries old and new or carbon and alkaline etc Batteries contain chemical substances they should be disposed of properly Visible and invisible laser radiation when open Avoid exposure to beam Where the MAINS plug or an appliance coupler is used as the disconnect device the disconnect device shall remain readily operable
53. tweeter e Frequency response 150 Hz 20 kHz Dimensions WxHxD Centre 435 4 x 103 8 x 95 4 mm e Front Rear 275 x 1117 8 x 288 mm e Weight e Centre 1 54 kg Front Rear 6 32 kg 7 14 kg Wireless rear speakers e Power supply 220 240 V 50 Hz Power consumption 60 W Standby power consumption lt 0 5W 9 Troubleshooting e Risk of electric shock Never remove the casing of this unit To keep the warranty valid never try to repair the system yourself If you encounter problems when using this unit check the following points before requesting service If the problem remains unsolved register your product and get support at www philips com welcome Main unit The buttons on this unit do not work Disconnect this unit from the power outlet for a few minutes then connect again e Ensure that the interconnect cable from the subwoofer is connected to the DVD Home Theatre unit Picture No picture No picture on HDMI connection See TVs manual for correct video input channel selection Change the TV channel until you see the DVD screen e Press DISC e If this happens when you change the TV type setting you have to switch to its default mode 1 Press 4 to eject the disc if any 2 Press lt for TV type 3 Press SUBTITLE Check if the HDMI cable is faulty Replace a new HDMI cable e If this happens when you change the HDMI video resolution press HDMI repeatedly until th
54. volume level e To mute the volume press X To restore the volume press K again or press the volume button Adjust Bass Treble Select Ambisound 13 A f a 1 Press AMBISOUND repeatedly to select a best Ambisound output that most suits the video or music you play vor calara Carera BASS PHILIPS DVD Multi channel source AMBISOUND 9 1 multi channel output 1 Press BASS TREBLE Press VOL repeatedly to set the level for low BASS or high TREBLE tone Note 9 1 with embracing Ambisound default setting Ideal for maximised movie experience MULTI 5 1 multi channel output for CHANNEL 5 1 a standard movie experience AMBISOUND Duplicate Ambisound STEREO 9 1 stereo to front and rear speakers Ideal for a party AMBISOUND Enhanced stereo sound STEREO from your two front speakers e Ifthe volume control is not used within 10 seconds it resumes normal volume control function CD Stereo source STEREO Stereo sound from your default setting two front speakers 34 EN eaa From TheatreSystem Manual com Manuals AMBISOUND Enhanced stereo sound STEREO from your two front speakers AMBISOUND Duplicate Ambisound STEREO 9 1 stereo to front and rear speakers Ideal for a party MULTI Create a multi channel CHANNEL 9 1 movie experience from stereo VCD sources Select a preset sound
55. volume level 4 Select Speakers Volume in the menu then press P Speakers Level Setup Front Left OdB Front Right I 0dB Center SS 0dB Subwoofer ay odB Rear Left a 0dB Rear Right Es 0dB 22 EN 5 Press lt 4 P to adjust the volume level then press OK gt The test tone is emitted from the speaker which you are adjusting e Repeat the above setting for other speakers until all the speakers output level sounds equally balance To set the output delay time centre and rear speakers only 6 Select Speakers Delay in the menu then press P Speakers Delay Setup Center Oms Rear Left Oms Rear Right Oms 7 Press 4 to set the delay time then press OK e Repeat the above setting for other speakers until the sound output from different speakers reach the listening position at the same time 8 To exit the menu press OPTIONS Tip Set longer delay time if the centre or rear speakers are closer to the listening position than the front speakers e ms setting for every 30cm distance between the speaker and the listening position Tendai From TheatreSystem Manual com Manuals Activate EasyLink control This feature is only applicable if this unit is connected to HDMI CEC compliant TV device It enables all the linked devices response or react to certain commands simultaneously with one touch control 1 Turn on the HD
56. z Signal system PAL NTSC e Video S N 56 dB Audio DAC 24 bits 192 kHz e Frequency response 4 Hz 20 kHz 44 1 kHz 4 Hz 22 kHz 48 kHz 4 Hz 44 kHz 96 kHz PCM IEC 60958 Dolby Digital DTS IEC60958 IEC61937 USB Compatibility Hi Speed USB 2 0 e Class support UMS USB Mass Storage Class 46 EN Tendai From TheatreSystem Manual com Manuals Radio e Tuning range FM 87 5 108 MHz 50 kHz 26dB quieting sensitivity FM 20 dBf F rejection ratio FM 60 dB e Signal to noise ratio FM 60 dB Harmonic distortion FM 3 e Frequency response FM 180 Hz 10 kHz 6dB Stereo separation FM 26 dB 1 kHz Stereo Threshold FM 23 5 dB Power Subwoofer e Power supply 220 240 V 50 Hz Power consumption 120 W Standby power consumption Normal lt 4 W e Low standby lt 0 3 W System Bass Reflex System Impedance 4 ohm Speaker drivers 165 mm 6 1 2 woofer e Frequency response 35 Hz 200 Hz Dimensions WxHxD 336 x 424 5 x 366 mm e Weight 12 7 kg Main unit Dimensions WxHxD 304 2 x 309 8 x 130 1 mm e Weight 3 7 kg Junction Box Dimensions WxHxD 168 x 37 x 65 mm Weight 0 2 kg Speakers e System full range satellite Speaker impedance 4 ohm centre 6 ohm Front Rear Speaker drivers Centre 1x 2 5 woofer 1x 1 5 tweeter Front Rear 2x 2 5 woofer 1x 1 5

Philips HTS9810 User Guide Manual Pdf

Contents

Download Pdf Manuals

Related Search

Related Contents