Glowtunes Wireless 4-Speaker Tower Stereo System
Contents
1. Questions Visit www ihomeaudio com Model iP76 Glowtunes Wireless 4 Speaker Tower Stereo System Introduction Thank you for purchasing this unit This product is nahe to u high quality wireless sound for your iPad iPhone iPod computer PDA or other Bluetootn audio device It will also charge and play your docked iPhone or Seau iPod and delight you with its varied color displays Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic operation and care of the unit Please read them caretully and keep for future reference Maintenance e Place the unit on a stable level surface away from sources of direct sunlight or excessive heat e Protect your floor fumiture when placing your unit on a natural wood and lacquered tloor tinish A cloth or other protective material should be placed between it and the furniture e Clean your unit with a soft cloth moistened only with mild soap and water Stronger cleaning agents such as Benzene thinner or similar materials can damage the surface of the unit Table of Contents Meet Your Unit Setup Your Unit eZ Using Bluetooth Pairing Your Device LL 3 Having UENO be E E E OE 4 Playing and Charging iPhone or PO 42h A Playing Audio Via Aux Using Video Out Jacks 2 5 DE Re RO EC RAS CES SR NE EEE A NEE E 6 peace ese ces gases eae nate se E eee eee A Consumer Product Safety Guide 8 SS is a registered trademarks of SRS Labs Inc T2. lll Strobe Press and release the Ill Button as needed to cycle through strobing flash effect speeds strobe mode is white light only 4 Lamp Mode Press and release the Button as needed to turn lamp mode on and to and cycle through brightness settings to the desired dimness brightness gt 2S ee p When switching color modes the unit will change to the last setting in a mode See the Light Mode Guide for more details on color mode settings Troubleshooting Unit doesn t respond no power e Check that all connections are correct and properly plugged in Make sure your device is properly paired with the iP76 Resetting the unit If the unit does not respond properly or appears to be frozen you may wish to try resetting it To do so power on the unit then press and hold the O Button and the Button simultaneously for about 5 seconds A single beep will contirm the reset Resetting will restore the unit to default settings NOTE After a reset you will need to repair your Bluetooth device s Trouble pairing device computer with iP76 Bluetooth implementation varies depending on your computer s hardware and operating system Please see our website for updates on pairing e Make sure you have the latest firmware for your iPad iPhone or iPod update via iTunes if needed e Make sure your device is working properly Check your device s manual for details on Bluetooth pairing and linking For further information and to see
3. period of time such as a month or longer the power cable should be Bl from the unit to prevent damage or corrosion Servicing The user should not attempt to service the unit beyond those methods described in the user s operating instructions Service methods not covered in the operating instructions should be referred to qualified service personnel Questions Visit www ihomeaudio com 8 or call 1 800 288 2792 Toll Free Limited 1 Year Warranty iHome Products a division of SDI Technologies Inc hereafter referred to as SDI Technologies warrants this product to be free from detects in workmanship and materials under normal use and conditions for a period of One 1 Year from the date of original purchase Should this product fail to function in a satisfactory manner it is best to first return it to the store where it was originally purchased Should this fa to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period SDI Technologies will repair or at its discretion replace this product without charge except for a 30 00 charge for handling packing return UPS postage and insurance This decision is subject to verification of the defect or malfunction upon delivery of this roduct to the Factory Service Center listed below The product must include proof of purchase including date Kern The fee o service without proof of purchase is 60 00 Before returning this product for
4. que des interf rences ne se produiront pas dans une installation particuli re Si cet quipement produit des interf rences nuisibles sur la r ception de la radio ou de la t l vision ce que vous pouvez facilement constater en teignant et en rallumant l quipement nous vous encourageons prendre l une ou plusieurs des mesures correctives suivantes e Reorienter ou d placer l antenne r ceptrice e loigner davantage l appareil du r cepteur e _ Branchez l quipement sur une prise ou un circuit auquel le r cepteur n est pas branch e Consultez votre revendeur ou un technicien radio t l vision qualifi pour plus d informations pareils digitaux de Classe B compatible avec l ICES 003 Canadien Meet Your Glowtunes Speaker Tower Included e iP 6 system main unit e 100 240V AC universal adaptor e Inserts for iPhone A AS iPod touch 2G 3G and iPod Touch 4G 6G nano e Remote control Use this insert iPod touch 2G iPhone 4 nano 6G touch 4G insert 16 insert 19 insert 20 For this iPod touch 2G 3G iPhone 4 4S nano 6G iPhone iPod iPod touch 4G Setup Your Unit Connect the included 100 240V AC adaptor to the AC Adaptor Jack located on the back of the unit and connect the other end into a working wall outlet If the outlet is controlled by a switch turn the switch on i outlet Meet Your Unit Top of Speaker Light Mode Buttons Press t le col ee ors Dock iPhone iPod s
5. service please first replace the batteries if applicable with fresh ones as exhausted or defective batteries are the most common cause of problems encountered If service is still required 1 Remove the batteries if applicable and pack the unit in a well padded heavy corrugated box 2 Enclose a photocopy of your sales receipt credit card statement or other proof of the date of purchase if within the warranty period 3 Enclose a check or money order n to the order of SDI Technologies for the sum of 30 00 60 00 without proof of purchase 4 Send the unit prepaid and insured to the Factory Service Center listed below Consumer Repair Department SDI Technologies Inc 1330 Goodyear Drive El Paso TX 79936 6420 Disclaimer of Warranty NOTE This warranty is valid only if the product is used for the purpose for which it was designed It does not cover i products which have been damaged by negligence or willtul actions misuse or accident or which have been modified or repaired by unauthorized persons ii cracked or ne cabinets or units damaged by excessive heat iii damage to digital media players CD s or tape cassettes if applicable iv the cost of shipping this product to the Factory Service Center and its return to the owner This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser In no event will SDI Technolog
6. 10 des r glements relatifs aux circuits int gr s Le fonctionnement est sujet aux deux conditions suivantes 1 Cet appareil ne doit pas causer d interf rences et 2 Cet appareil doit accepter toute interf rence re ue y compris les interf rences qui peuvent occasionner un fonctionnement ind sir Cet appareil r pond aux exigences du paragraphe 15 de la loi de la Commission F d rale sur les Communications l utilisation de cet appareil doit r pondre aux deux conditions suivantes 1 Cet appareil ne doit pas provoquer d interferences nuisibles et 2 cet appareil doit accepter toutes les interf rences re ues y compris les interf rences pouvant provoquer un fonctionnement non d sir e Avertissement Tout changement ou modification apport cet appareil sans le consentement expresse de la partie responsable pour la conformit peut annuler le droit de l utilisateur d utiliser cet appareil e Remarque Cet N a t test ci ug conforme aux limitations pour un appareil num rique de Classe B selon la Section 15 de la r glementation CG Ces limites sont con ues pour fournir une protection raisonnable contre les interf rences nuisibles dans une installation r sidentielle Cet quipement g n re utilise et peut mettre des fr quences radio et s il n est pas install et utilis selon les instructions peut causer des interf rences nuisibles aux communications radio Cependant il n existe aucune garantie
7. de reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmtul interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged fo try to correct the interference by one or more of the following measures e _ Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conforme la norme NMB 003 du Canada Information FCC FCC ID EMOIP67 IC 986B IP76 D claration FCC quant l exposition la radiation Cet quipement est conforme aux limites FCC relatives l exposition la radiation par radiofr quences tablies pour les environnements non contr l s Cet metteur ne doit pas tre colocalis ou utilis en conjonction avec tout autre metteur ou antenne Cet appareil est conforme la norme RSS 2
8. ettings for each mode A Slow Fade Button I Solid Color Button Power Button Audio Mode Button Switch to iPhone iPod Line in mode Pulse to Music Button J3 Lamp Button 2 Strobe Button Bluetooth Button Lower Volume Button Raise Volume Button Play Pause iPhone iPod Reariok Spanier Light On Off Button Aux Line in Jack Top a ae Video Out Jacks Bottom AC Adaptor Jack Using Bluetooth Pairing Your Device NOTE See the iP76 Bluetooth Connection Guide for complete pairing details L 2 Press the Button to turn on the unit release when buttons light up The Button will flash slowly Turn on Bluetooth capability on your device and make it discoverable see your device s instructions to add or setup a Bluetooth device Press and hold the Button on the unit until the button flashes blue and the unit beeps twice to indicate pairing attempt The Button will flash rapidly while the unit attempts to pair iP76 should appear in your device s list of Bluetooth devices its status display may indicate not paired or not connected Select iP76 to connect If your device asks for a password enter 1234 on the keyboard keypad or display of your device If no device is paired within 3 minutes the pairing attempt will stop If this occurs retry steps 2 4 Once paired with a device the Button light will glow s
9. ideo from a docked iPhone or iPod Please see below to determine which video models your device 66 supports Video cables are not included e Composite interlaced all iPod iPhone models 5G iPod ONLY supports this mode e Component interlaced 1G iPod touch iPhone e Component progressive iPod classic 3G iPod nano 4G iPod connect to component connect to composite video in jack on your TV video in jack on your TV nano 2G iPod touch The default video setting is Component e To switch into Composite Video Mode hold down iPod Button and press Button e To switch back into Component Video Mode hold down iPod Button and press Button For Composite Video Mode you must switch to it each time you dock your iPod iPhone 5 For component video For composite video Using Color Modes 1 Press and release the 2 Button as needed to turn the lamp on or off You can also press any color mode button to turn on the lamp in that mode Press a color mode button repeatedly to cycle through its settings 2 Slow Fade Press and release the Button as needed to cycle through color fade effects such as fade from the bottom fade from the top fade from center out etc I Solid Color Press and release the I Button as needed to cycle through the seven colors in the iP76 spectrum JI Pulse to Music Press and release the JI Button as needed to cycle through pulse to music modes such as pulse to solid color pulse to all colors etc
10. ies or any ot its affiliates contractors resellers their officers directors shareholders members or agents be liable to you or any third party for any consequential or incidental damages any lost profits actual exemplary or punitive damages Some states do not allow limitations on implied warranties or exclusion of consequential damages so these restrictions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually ui fo you upon your transfer of currency money order cashier s check or credit card for purchase of your SDI Technologies product 2012 SDI Technologies Inc All rights reserved Questions Visit www ihomeaudio com or call 1 800 288 2792 Toll Free iP76 0413128B Printed in China
11. ruBass technology is incorporated under license from SRS Labs Inc TruBass SRS WOW which feartures TruBass significantly improves the playback quality of audio delivering a dynamic 3D entertainment experience with deep rich bass and high frequency clarity for crisp detail FCC Information FCC ID EMOIP76 IC 986B IP76 FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter This Device complies with RSS 210 of the IC Rules Operation is subject to the following two conditions 1 This device may not cause interference and 2 This device must accept any interference received including interference that may cause undesired operation This device complies with Part 15 of the FCC Rules operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation e Warning Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment e NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provi
12. should be routed so that they are not likely to be walked on or pinched by items placed oe or against them It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket Cleaning The unit should be cleaned only using a warm damp cloth Do not use solvents etc Objects and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product Attachments Do not use attachments not recommended by the product manufacturer geming and Power Surge Protection Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time This will prevent damage to the product due to lightning and powerline surges verloading Do not overload wall sockets extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock Damage Requiring Service The unit should be serviced by qualified service personnel when A the power supply cable or plug has been dama ed B objects have fallen into or liquid has been spilled into the enclosure C the unit has been exposed to rain D the unit has been dropped or the enclosure damaged E the unit exhibits a marked change in performance or does not operate normally Periods of Nonuse If the unit is to be left unused for an extended
13. teadily blue and one beep will confirm that pairing is complete There should also be an indication on your device that pairing is complete On some devices you must then select use as a stereo audio device or similar on the device s Bluetooth menu Once paired your device should autolink to the iP76 whenever within range Playing Audio Via Bluetooth 1 Press and release the Button to turn on the unit The Button light will flash blue as the unit searches for a previously paired device and then turn solid blue when a previously paired device is detected 2 Press and release the pit Button on the unit to play or pause audio from your Bluetooth device 3 Use the Volume Buttons on the unit to adjust volume A When done listening press the Button to turn the unit off Playing and Charging Your Docked iPhone or iPod Press the b Button to select iPod Line in mode 2 Select the included insert for your iPhone or iPod model and press it gently into the dock Inserts provide the best stability However if you have a different model iPhone or iPod you can still dock it provided you always do so carefully and gently If you prefer to dock using an insert please contact iHome at 1 800 288 2792 es to purchase one To remove an insert place a thumbnail in the slot press in and pull gently uowards Gently dock your playing iPhone or iPod into the dock on top of the unit In a moment the unit will power on and you
14. the latest instructions visit www ihomeaudio com support Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner this unit has been designed and manufactured to ensure your personal safety However improper use can result in potential electrical shock or fire hazards Please read all safety and operating instructions carefully before installation and use and keep these instructions handy for future reference Take special note of all warnings listed in these instructions and on the unit l 2 Water and Moisture The unit should not be used near water For example near a bathtub washbowl kitchen sink laundry tub swimming pool or in a wet basement Ventilation The unit should be situated so that its location or position does not interfere with its proper ventilation For example it should not be situated on a bed sofa rug or similar surface that may block ventilation openings Also it should not be placed in a builtin installation such as a bookcase or cabinet which may impede the flow of air through the ventilation openings Heat The unit should be situated away from heat sources such as radiators heat registers stoves or other appliances including amplifiers that produce heat Power Sources The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance Power Cable Protection Power supply cables
15. will hear the audio trom your iPhone iPod While docked and unit is connected to AC power source your iPhone or iPod will charge until tully charged If your iPhone or iPod is not in play mode press the Button to turn on the unit 5 Press and release the Pil Button to play or pause your iPhone iPod Use iPod transport controls on your iPhone or iPod to skip tracks advance etc 6 Use the Volume Buttons to adjust volume 7 When done listening press the Button to turn the unit off es Playing Audio via Aux 1 Connect a 3 5 mm audio plug from a standard stereo audio cable not included to the Line in jack in the back of the unit and connect the other end to the headphone or line out jack on your audio device 2 Press the Button to turn on the unit release when white light appears 3 Press the f Button to listen to audio via aux line in Make sure there is no playing iPhone or iPod docked in the unit or you will hear audio from both devices A Use the Volume Buttons to adjust volume You may wish to adjust the volume on your audio device too 5 When done listening press and release the Button to turn the unit off Remember to turn off your audio device too NOTE the pit Button only works in Bluetooth or iPod modes It does not control aux line in devices Using Video Out Jacks This unit features 3 video out jacks on the back of the unit to output ge rear CAE component or composite v
Download Pdf Manuals
Related Search