Pro-Ject DAC Box S FL
Contents
1. Revision 2013 1 15 32. 10 DE BY PRO JECT AUDIO SYSTEMS INSTRUCTIONS FOR USE Pro Ject DAC Box S FL Dear music lover thank you for purchasing a PRO JECT AUDIO DAC Box In order to achieve maximum performance and reliability you should study these instructions for use carefully V Warning of a hazard for the user the unit or possible misuse 5 Important notice Safety instructions AC outlet voltages vary from country to country Before connecting to the mains make sure that the voltage in your area meets the voltage requirements printed on the power supply The power supply is used to disconnect the unit from the mains Make sure that the power supply is easily accessible at all times Never handle the device the power supply while your hands are wet or damp Avoid letting liquids enter the device or the power supply Never place any item containing liquid such as a flower vase on or near the device Never spill any liquid on the device or the power supply Never place any naked flame sources such as lighted candles on or near the device The product shall not be used in damp or wet locations next to a bathtub sink swimming pool or any other similar conditions Connectors ae c Digital input Power Right Co axial Optical 9V 0 ae a ES Pro Ject Audio Systems Vienna Austria Make all connections whilst the converter is disconnected from the power supply V Take care to connect the left and
3. like Dolby AC 3 or DTS Sampling rates 32kHz 44 1kHz 48kHz and 96kHz Outboard power supply 9V 300mA DC suitable for your country s mains supply Power consumption 80mA DC lt 1W in standby Dimensions W x H x D D with sockets 103 x 36 x 104 109 mm Weight 560g Service Should you encounter a problem which you are not able to alleviate or identify despite the above information please contact your dealer for further advice Only when the problem cannot be resolved there should the unit be sent to the responsible distributor in your country Warranty The manufacturer accepts no responsibility for damage caused by not adhering to these instructions nes for use Modification or change to any part of the product by unauthorized persons release the manufacturer from any liability over and above the lawful rights of the customer Copyright trademarks PRO JECT is a Registered Trademark of H Lichtenegger The information was correct at the time of going to press The manufacturer reserves the right to make This guide was produced by Audio Trade GmbH changes to the technical specification without prior Copyright 2011 All rights reserved notice as deemed necessary to uphold the ongoing process of technical development TOSlink is a registered trademark of Toshiba corporation Dolby is a registered trademarks of Dolby Laboratories DTS is a registered trademark of DTS Inc Audio Trade GmbH Pro Ject DAC Box S FL
4. right channels correctly The right channel is usually marked red the left channel black or white Never use any other power supply than the one supplied with the unit Connection to the amplifier Connect the Out socket to a line input such as AUX on your amplifier Inputs Sources with an digital output such as a CD player can be connected to the digital inputs coaxial and optical Mains power connection Connect the low voltage plug from the power supply to the Power 9V socket before connecting the power supply to the mains Front panel controls O E DAC Box S FL 2 Audio Trade GmbH Pro Ject DAC Box S FL Revision 2013 1 15 To switch on from standby or to standby The push button on the left hand side will toggle the DAC between its fully operational status and standby The blue LED above the stand by push button shows that the unit is switched on Input selector Pressing the grey button next to the two LEDs repeatedly selects the digital inputs in turns The selected input will be shown by the corresponding LED on the DAC Box S FL Technical specifications Pro Ject DAC Box S FL Line level output 1 pair RCA phono sockets Output voltage 1 9Vrms Digital outputs 1 x coaxial S PDIF 1 x optical TOSlink D A converter Philips TDA 1543 16Bit 44 1kHz 4 converter in parallel mode without oversampling and digital filter Supported audio format PCM LPCM No support for multi channel formats
Download Pdf Manuals
Related Search