User Manual Per Port Monitoring Models
Contents
1. Mon zl 07 59 on w D User Network G v wn z z pe bj kj fk Ra e GG ek ag Li LD IT 3 ServerLink PPM PDU User Manual Ver 1 0 12 Control Ping Action Automatically reboots locked devices by pinging their IP address Ping IP Address Set the device IP address that you want monitored Response 10 minutes The PDU will ping the assigned IP address once every minute If the device does not respond the number will be increased by one After 10 attempts 10 minutes if the device has not responded the number will display 10 and the PDU will carry out the assigned action automatically Action Select outlet action to OFF or OFF ON Active Select this check box to enable this Ping function SERVER ANK Fela Total load 0 0 A Status Normal Information Ping Response Outlet Action Active PDU IP Address 10 minutes System 19 168 23 200 0 OutletA OFF v o Control Outlet 19 168 23 201 0 OutletB OFF v F Group 19 168 23 202 0 Outlet OFF v O Schedule Ping Action 19 168 23 203 0 OutletD OFF w oO Configuration PDU 19 168 23 204 0 OutletE OFF v g Threshold 19 168 23 205 o Outlet OFF o User Network 19 168 23 206 0 OutletG OFF v F Mail SNMP 19 168 23 207 0 OutletH OFF v O SSL Time Ser2. Connect Ethernet cable to the PDU 8 Switch on the PDU Note 1 The default setting to assign the IP address is DHCP If the PDU cannot get the IP from a DHCP server the IP address will default to 192 168 0 216 ServerLink PPM PDU User Manual Ver 1 0 5 Web Interface Login Enter the ServerLink PDU IP address into a web browser Default User Name is snmp Default Password is 1234 Connect to 192 168 0 59 a nS The server 192 168 0 59 at Protected requires a username and password Warning This server is requesting that your username and password be sent in an insecure manner basic authentication without a secure connection User name amp Password F Remember my password x 11 Gem _ ServerLink PPM PDU User Manual Ver 1 0 Information PDU Displays individual power consumption of each outlet or total PDU power consumption If an optional environmental probe has been connected it will display the temperature and humidity information SERVERLINK FLD Total load 0 0 A Status Normal Information PDU PDU PDU1 0 0 A Normal System PDU2 0 0 A Normal Control PDU3 0 0 A Normal Outlet PDU4 0 0 A Normal Group PDU5 0 0 A Normal Schedule PDUS 0 0 A Normal Ping Action PDU7 0 0 A Normal Configuration PDU8 0 0 A Normal PDU Total Current 0 0 A Normal Threshold User Option Device Network Temperature 20 4 C Mail Humidity 58 SNMP ServerLink PPM PDU User Manual Ver 1 0
3. equipment in the rack should be such that a hazardous condition is not achieved due to uneven mechanical loading D Circuit Overloading Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of the circuits might have on over current protection and supply wiring Appropriate consideration of equipment nameplate ratings should be used when addressing this concern E Reliable Earthing Reliable earthing of rack mounted equipment should be maintained Particular attention should be given to supply connections other than direct connections to the branch circuit e g use of power strips Diagram lt PDU Install In the Rack S PDU Install In the Rack gt PDU Install In the Rack Remote Monitor The multiple PDU power Sex PDU Install In the Rack PDU Install In the Rack Local Monitor i PDU Install In the Rack ServerLink PPM PDU User Manual Ver 1 0 Hardware 1 Install mounting brackets 2 The ServerLink PDU comes with brackets for mounting in a rack To mount the PDU into a rack perform the following procedure 3 Attach the mounting brackets to the unit using the four retaining screws provided for each of the brackets 4 Choose a location for the brackets 5 Align the mounting holes of brackets with the notched hole on the vertical rail and attach with the retaining screws 6 Connect input and output power 7
4. Information System Displays PDU system information including Model No Firmware Version MAC Address System Name System Contact Location SERVERLINK ZZ 3 Total load 0 0 A Status Normal Information Model No SLP SPP1608 H PDU Firmware Version s4 82 090828 8cb8s System MAC Address 00 16 18 77 09 17 Control System Name PDU Outlet System Contact Admin Group Schedule Location Office Ping Action y Configuration PDU Threshold ServerLink PPM PDU User Manual Ver 1 0 Control Outlet Displays PDU outlet on off status Select the outlet by checking the box and then click ON OFF or OFF ON button to control the output power for PDU ON Press this button to turn on the assigned outlets OFF Press this button to turn off the assigned outlets OFF ON Press this button to reboot the assigned outlets Gemeen FPL Total load 0 0 A Status Normal Information Outlet Name Status TT PDU OutletA ON O System OutletB ON O Control OutletC ON O Outlet OutletD ON F Group OutletE ON 0 Schedule OutletF ON Fj Ping Action OutletG ON Fi Configuration OutletH ON F pou oF Threshold User Network ServerLink PPM PDU User Manual Ver 1 0 Control Group Control outlet power for multiple outlets Setting Press the setting button to enter setting mode Outlet Assign the outlet in a group Note The outlet number needs to be input in alphabetical order ON Press this button to turn on the as
5. SERVERLINK FL User Manual Per Port Monitoring Models Elfi m olalx lal a 1s INCKOGUCTION i ceeesdteardeccwaceveieieseeeciseceswacnesekeaiete duced rey sutenk Reedber ene NERE 1 2 Package Contents EE 2 SH Tee EE E el EC HE ele ET 5 5 Web Dag ut e EEN 6 1 Introduction The ServerLink Per Port Monitoring PDU is a network ready device designed and equipped with an Intelligent True RMS Current Meter to indicate the individual power consumption of each outlet or total PDU power consumption The ServerLink PDU offers an easy to set up and user friendly interface The software enables you to remotely monitor power consumption of a single PDU or multiple PDUs Features Built in web server allowing real time monitoring of each individual outlet or total PDU current consumption Built in True RMS current meter Easy Setup The meter can display the IP address of the PDU Homepage supports SSL Provides audible alarm when the power consumption exceeds the warning threshold or overload threshold Send email and traps when the power consumption exceeds the warning threshold or overload threshold Utility software can monitor a large amount of ServerLink PDUs at the same time Supports SNMP and provides MIB for the PDU to be monitored by NMS Indicates outlet and circuit status with LED Supports power on sequence Supports user defined delayed time for power on and power off Scheduled control of outlet power User defined group ou
6. d the PDU will change the way to assign the IP address via DHCP or Fixed IP Press and hold after 6 beeps release the button The PDU will reset the power to all outlets and restore all settings to factory default Meter Displays the current consumption or IP Address ID Indicates the outlet number for the meter display ServerLink PPM PDU User Manual Ver 1 0 LED Indicator SSL Yellow Light on means web access is protected by SSL DHCP Green Light on means PDU is assigned an IP address via DHCP e Outlet 1 8 Green Light on indicates outlet power is on Light off indicates outlet power is off Status Red Indicates each circuit status ENV e RJ11 connector for optional environmental monitoring probe to monitor temperature and humidity Circuit Breaker Overload power protection ServerLink PPM PDU User Manual Ver 1 0 4 Installation Rack Mount Instructions A Elevated Operating Ambient If installed in a closed or multi unit rack assembly the operating ambient temperature of the rack environment may be greater than room ambient Therefore consideration should be given to installing the equipment in an environment compatible with the maximum ambient temperature specified by the manufacturer B Reduced Air Flow Installation of the equipment in a rack should be such that the amount of air flow required for safe operation of the equipment is not compromised C Mechanical Loading Mounting of the
7. kel geren in FPL Email Setting Email Server Sender s Email Total load 0 0 A Status Normal mail your com sender yourcom com Recipient s Email Address Email Address ServerLink PPM PDU User Manual Ver 1 0 18 Configuration SNMP When an event occurs the PDU can send out a trap message to a specified IP address Trap Notification Set receiver IP address for trap Community Set SNMP community Read Community is public and fixed Default Write Community is public and can be modified by user geren FPR Total load 0 0 A Status Normal Information Trap Notification PDU Receiver IP 1902 16807 System Control Apply Outlet Community Group Read public Schedule Ping Action Configuration PDU Threshold User Write public Network Mail SNMP SSL ServerLink PPM PDU User Manual Ver 1 0 19 Configuration SSL Enable SSL for web communication User must input the correct ID and password to enable SSL function Default ID is snmp Default password is 1234 SERVERL INK Total load 0 0 A Status Normal Information PDU Enable SSL F Confirmation System Control Outlet Password omy Apply Schedule Ping Action Configuration PDU Threshold User Network ServerLink PPM PDU User Manual Ver 1 0 20 Configuration Time Set the time for schedule control Internet Time Setting Get
8. le Ron Acidi Password Configuration Apply PDU Threshold ServerLink PPM PDU User Manual Ver 1 0 Configuration Network PDU network information Enable DHCP Change the way to assign the IP address for the PDU SERVERLINK Fm Total load 0 0 A Status Normal Information IP Address PDU Host Name DIGIBOARD System Control IP Address 192 168 0 14 Outlet wm Subnet Mask Group Schedule Gateway 192 1 Ping Action 4 Enable DHCP Caafigurniian DNS Server IP PDU Threshold Primary DNS IP JE VOU U 2 User Secondary DNS IP lo Network Apply en Apply SNMP SSL ServerLink PPM PDU User Manual Ver 1 0 Configuration Mail When an event occurs the PDU can send an email message to a specified email address Email Server This setting must be a local or public fully qualified domain name Eg mailserver domain local or mail domain com au It cannot be an IP address Sender s Email Input the sender s email address Email Address Input the recipient s email address The message in the email will be as follows XXXXXXXX The above indicates the outlet status of ports A to H in order X 0 means the power off X 1 means the power on Note Make sure DNS server can resolve the Email Server s domain name Information PDU System Control Outlet Group Schedule Ping Action Configuration PDU Threshold User Network Mail SNMP SSL ime
9. signed group OFF Press this button to turn off the assigned group Active Select this check box to enable the group to be controlled Information PDU System Control Outlet Group Schedule Ping Action Configuration PDU Threshold User Network SERVER NIK geren Total load 0 0 A Status Normal Outlet A B C Active BH E Bi CO v i EE SU HEH ny oj o nin njin H E 7 oO N ServerLink PPM PDU User Manual Ver 1 0 11 Control Schedule Control the assigned outlet by pre defined schedule Outlet Assign the outlet that you want to be controlled in this schedule Every Set a single day a week day or every day Date If Sgl is selected you need to input a date here Action Begin End ON Turn on outlet at this time None OFF Turn off outlet at this time None OFF ON Turn off outlet at this time Turn on outlet at this time ON OFF Turn on outlet at this time Turn off outlet at this time Active Select this check box to enable the assigned scheduled control SERVERL INK FPL Total load 0 0 A Status Normal Information Current Time 2007 01 01 02 22 04 PDU Outlet Every Date Begin End Action Active System A B yy mm dd hh mm hh mm Control A Mon 07 59 ON J Outlet Group B Mon J 07 59 ON v Schedule Ping Action Configuration PDU Threshold
10. time from the assigned network time server System Time Input time manually SERVERLINK FPL Total load 0 0 A Status Normal Information Internet Time Setting PDU Time Between Updates NO v System gt Primary Time Server Outlet Secondary Time Server Group em Time Zone Schedule Ping Action Configuration System Time 2007 01 01 02 20 23 PDU System Time ES 2007 01 01 02 20 17 Threshold yyyy mm dd hh mm ss User ServerLink PPM PDU User Manual Ver 1 0 21
11. tlet control Auto reboots locked devices by pinging their IP address Supports network time protocols Optional probes can support temperature and humidity monitoring Provides power protection via the circuit breaker ServerLink PPM PDU User Manual Ver 1 0 2 Package Contents The standard ServerLink PDU package contains a Power Distribution Unit with supporting hardware and software Power Distribution Unit e Rack Mount Brackets CD ROM containing ServerLink PDU User Manual ServerLink PDU Utility User Manual ServerLink PDU Utility Software MIB Management Information Base for Network ServerLink mib Adobe Acrobat Reader ServerLink PPM PDU User Manual Ver 1 0 SERVERLINK Functions Description Ethernet The Network connection for the built in web server Audible Alarm PDU exceeds warning threshold 1 beep per second PDU exceeds overload threshold 3 beeps per second Note The audible alarm will not change beeping status until the current drops more than 0 5A below the warning or overload threshold Function Button Press and release to turn off the warning beep The overload beeping cannot be cancelled Press and hold after 1 beep release the button The meter will display the current information and temperature humidity in outlet sequence Press and hold after 2 beeps release the button The meter will display the IP address of the PDU Press and hold after 4 beeps release the button an
12. verLink PPM PDU User Manual Ver 1 0 13 Configuration PDU Set the outlet name and delay time Name Rename the outlet ON Set the delay time for power on sequence OFF Set the delay time for power off sequence Note The maximum delay time is 255 seconds SERVER NK geren Total load 0 0 A Status Normal Information ON OFF PDU Name Delay Delay System es a lose 1 Outlet 2 2 Schedule gem OutletD mem De Je Configuration si 5 User Network s Mail SNMP SL ServerLink PPM PDU User Manual Ver 1 0 14 Configuration Threshold Set the warning and overload threshold for each outlet Set the lower and upper threshold for temperature and humidity SERVER NK geren Total load 0 0 A Status Normal Information Threshold Amp Name PDU Warning Overload System PDU1 D 9 trol Voten PDU2 8 10 Outlet PDU3 8 10 Group Schedule PDU4 e mm Ping Action PDU5 8 10 Configuration PDUG is 10 PDU Threshold SE 8 110 Tam PDU8 a 10 Network Lower Upper Mail Temperature 9 _ Humidity E ServerLink PPM PDU User Manual Ver 1 0 Configuration User Change ID Username and password ID and password are case sensitive Default ID is snmp Default password is 1234 SERVER NK geren Total load 0 0 A Status Normal Information Original PDU ER ID System Control Password Outlet New Grou Schedu
Download Pdf Manuals
Related Search