Wireless Temperature Station Model 9245 User Manual Note: Mount
Contents
1. as headphones or speakers operating on the same signal frequency 915MHz may prevent correct signal transmission and reception 4 Neighbors using electrical devices operating on the 915MHz signal frequency can also cause interference Note When the 915MHz signal is received correctly do not re open the battery cover of either the transmitter or the Temperature Station as the batteries may spring free from the contacts and force a false reset If this happens accidentally all units must be reset see Setting up above otherwise transmission problems may occur The transmission range is about 200 ft from the transmitter to the Temperature Station in open space However this depends on the surrounding environment and interference levels If no reception is possible despite the observation of these factors all system units have to be reset see Setting up above POSITIONING THE TEMPERATURE STATION Table standing The Temperature Station comes attached with a table stand which provides the option of table standing the unit in addition to wall mounting To wall mount Before wall mounting please check that the outdoor temperature values can be received from the desired locations As Fix a screw not supplied into the desired wall leaving the head extended out by about 5mm 2 Hang the Temperature Station onto the screw Remember to ensure that it locks into place before releasing glazing etc2. the batteries from both units and start again from step 1 4 In order to ensure sufficient 915 MHz transmission the outdoor transmitter should be placed a distance of no more than 200 feet from the Temperature Station and the transmitter see notes on Positioning and 915 MHz Reception FEATURES The Temperature Station Manual time set hour and minute 24 Hour Time Format Temperature Display in Fahrenheit F Indoor and Outdoor Temperature with MIN MAX Records Low Battery Indicator Wireless Transmission at 915 MHz 8 Second Signal Reception Interval Wall Mount or Table Stand The Outdoor Temperature Transmitter Wireless 915 MHz Outdoor Temperature Transmitter Rain resistant Casing Wall Mounting or Table Stand Note Mount in a sheltered place Avoid direct rain and sunshine HOW TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE STATION The Temperature Station uses 2 x AA IEC LR6 1 5V batteries When batteries will need to be replaced the low battery icon will appear on the LCD g To install and replace the batteries please follow the steps below A Lift up the battery compartment cover q 2 Insert batteries observing the correct polarity see i marking 3 Replace compartment cover HOW TO INSTALL REPLACE BATTERIES IN THE OUTDOOR TRANSMITTER The Temperature transmitter uses 2 x AAA IEC LR3 1 5V batteries When batteries need to b
3. Before securing in place please ensure that the Temperature Station can receive the 915MHz signal from the temperature transmitter at the positions that you wish to place them CARE AND MAINTENANCE Extreme temperatures vibrations and shocks should be avoided as these may cause damage to the unit and give inaccurate forecasts and readings When cleaning the display and casings use a soft damp cloth only Do not use solvents or scouring agents as they may mark the LCD and casings Do not submerge the units in water Furthermore fix all parts in place where the units are adequately protected against moisture and rain Immediately remove all low powered batteries to avoid leakage and damage Replace only with new batteries of the recommended type Do not make any repair attempts to the unit Return them to their original point of purchase for repair by a qualified engineer Opening and tampering with the unit may invalidate their guarantee Do not expose the units to extreme and sudden temperature changes this may lead to rapid changes in forecasts and readings and thereby reduce their accuracy POSITIONING THE REMOTE TEMPERATURE TRANSMITTER base The remote temperature transmitter can be placed onto any flat surface or wall mounted using the bracket which doubles as a stand or wall mount To wall mount 1 Secure the bracket onto a desired wall using the screws and plastic anchors 2 Clip the remote temperature transmitt
4. SUH TECHNOLOGY INSTANT TRANSMISSION my gt LA CROSSE EE TECHNOLOGY Wireless Temperature Station Model 9245 User Manual Congratulations on purchasing this wireless 915 MHz temperature station with indoor and outdoor temperature With two easy to use function keys this innovative product is ideal for use in the home or office Hanging hole LCD display Battery compartment Function keys SETUP Note this temperature station can only receive one transmitter only 1 First insert batteries into the transmitter see How to install and replace batteries in the Temperature transmitter below 2 Within 30 seconds of powering up the transmitter insert batteries into the Temperature Station see How to install and replace batteries in the Temperature station below Once the batteries are in place all segments of the LCD will light up briefly Following the indoor temperature the time as 0 00 will be displayed If they are not shown in the LCD after 60 seconds remove the batteries and wait for at least 60 seconds before reinserting them Once the indoor data is displayed you may proceed to the next step 3 After the batteries are inserted the Temperature Station will start receiving outdoor temp data from the transmitter The outdoor temperature should then be displayed on the Temperature station If this does not happen after 2 minutes remove
5. al defects within a fixed installa the seller or pe LA CROSSE TI he product itself and does not cover the cost of installation or removal from ion normal set up or adjustments claims based on misrepresentation by formance variations resulting from installation related circumstances ECHNOLOGY LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL CONSEQUENTIAL PUNITIVE OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE OPERAT ON OR MALFUNCTION OF THIS PRODUCT THIS PRODUCT IS NOT Summary of the Declaration of Conformity We hereby declare that this wireless transmission device does comply with the essential requirements of R amp TTE Directive 1999 5 EC LIABILITY DISCLAIMER The electrical and electronic wastes con electronic waste in wild country and or in the environment Please contact your local or and regional legal dumping grounds with selective col All electronic instruments must from now part in the reuse recycling and recovery ain hazardous substances Disposal of unauthorized grounds strongly damages authorities to retrieve the addresses of lection on be recycled User shall take an active of the electrical and electronic waste The unrestricted disposal of electronic waste may do harm on public health and the quality of environment As stated on the gift box and labeled on he product reading the User manual is highly recommended for the benefit of the user This product must however not be
6. aximum temperature record for the MIN indoor temperature can only be up to 10 C and the MIN MAX temperature resolution is 1 C The resolution of the indoor temperature is 0 5 C TO RESET THE MIN MAX DATA The MIN MAX temperature can be reset manually by pressing and holding the key for about 3 seconds This will reset all indoor and outdoor MIN MAX temperature to current indoor and outdoor temperatures LOW BATTERY INDICATOR Low battery indicator is displayed on the LCD when the batteries require changing 915 MHz RECEPTION CHECK The Temperature Station should receive the outdoor temperature data within a few minutes after setup If the temperature data are not received about 2 minutes after setup the signal reception icon does not appear please check the following points T The distance of the Temperature Station or transmitter should be at least 1 5 to 2 meters away from any interfering sources such as computer monitors or TV sets 2 Avoid positioning the Temperature Station onto or in the immediate proximity of VIEWING THE OUTDOOR TEMPERATURE AND THE MIN MAX The outdoor temperature is displayed in the last section of the LCD along with the outdoor MIN MAX records Outdoor temperature MIN outdoor MAX outdoor temperature temperature Notes The minimum maximum temperature resolution is 1 F The resolution of the outdoor temperature is 0 2 F metal window frames 3 Using other electrical products such
7. d only to the original purchaser of this product To receive warranty service the purchaser must contact La Crosse Technology Ltd for problem determination and service procedures Warranty service can only be performed by a La Crosse Technology Ltd authorized service center The original dated bill of sale must be presented upon request as proof of purchase to La Crosse Technology Ltd or La Crosse Technology Ltd s authorized service center La Crosse Technology Ltd will repair or replace this product at our option and at no charge as stipulated herein with new or reconditioned parts or products if found to be defective during the limited warranty period specified above All replaced parts and products become the property of La Crosse Technology Ltd and must be returned to La Crosse Technology Ltd Replacement parts and products assume the remaining original warranty or ninety 90 days whichever is longer La Crosse Technology Ltd will pay all expenses for labor and materials for all repairs covered by this warranty If necessary repairs are not covered by this warranty or if a product is examined which is not in need TO BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION THIS PRODUCT IS NOT A TOY KEEP OUT OF CHILDREN S REACH This warranty gives you specific legal rights You may also have other rights specific to your State Some States do not allow the exclusion of consequential or incidental damages therefore the above exc
8. e replaced the low battery icon will appear on the LCD of the Temperature Station To install and replace the batteries please follow the steps below A Remove the battery compartment cover 2 Insert the batteries observing the correct polarity see marking 3 Replace the battery holder to the unit Note When changing batteries in either of the units all units need to be reset by following the setup procedures This is because a random security code is assigned by the transmitter at start up and this code must be received and stored by the Temperature Station in the first few minutes of power supplying BATTERY CHANGE It is recommended to replace the batteries in all units regularly to ensure optimum accuracy of these units Battery life see Specifications Please participate in the preservation of the environment Return used batteries to an authorized depot b LCD SCREEN AND SETTINGS TIME mY INDOOR C Low Battery indicator temp station c Indoor Temperature in C cds 1 Max e MIN MAX Indoor temperature Low Battery indicator Fin cS transmitter OUTDOOR rect Outdoor Reception Signal icon Outdoor Temp in C HE x ia Pe MIN MAX Outdoor temperature When the signal from the transmitter is successfully received by the Temperature Station this icon will be switched on If not successful the icon will not be shown on the LCD User can t
9. er onto the bracket Note The mounting surface can affect the transmission range If for instance the unit is attached to a piece of metal it may then either reduce or increase the transmitting range For this reason we recommend not to place the unit on any metal surfaces or in any position where a large metal or highly polished surface is in the immediate vicinity garage doors double SPECIFICATIONS Temperature measuring range Indoor 14 5 F to 139 5 F with 0 5 F resolution OF L displayed if outside this range Outdoor z 89 8 F to 139 8 F with 0 2 F resolution Outd Temperature Station Outdoor Temperature Transmitter OF L displayed if outside this range Indoor Temperature checking interval oor data checking interval Power consumption every 20 seconds every 8 seconds 2 x AA IEC LR6 1 5V 2 x AAA IEC LR3 1 5V Battery life cycle Alkaline batteries recommended Temperature Station Outd Tem perature Station Outd loor Temperature Transmitter Dimensions L x W x H oor Temperature Transmitter approximately 24 months approximately 12 months 3 14 X 5 00 X 1 14 1 27 X 3 40 X 0 55 WARRANTY La Crosse Technology Ltd provides a 1 year limited warranty on this product against manufacturing defects in materials and workmanship This limited warranty begins on the original date of purchase is valid only on products purchased and used in North America an
10. herefore easily see whether the last reception was successful ON icon or not OFF icon On the other hand the short blinking of the icon shows that a reception is being done at that time FUNCTION KEYS The Temperature Station has only two easy to use function keys SET key key SET key e Press and hold for about 3 seconds to enter the Manual setting mode key e Press to make adjustment in the setting mode e Press and hold to reset all MIN MAX records MANUAL TIME SET To manually set the time of the Temperature Station TIME Hour flashing ic 4y Minutes flashing 1 Press and hold the SET key for 3 seconds to enter the manual time setting mode 2 The hour digit of the time display will be flashing Press the key to adjust the hour press and hold to allow fast advance Press SET key to confirm and go to the minute setting 4 The minute digit will be flashing Press the key to adjust the minute press and hold to allow fast advance Press SET key once more to return to normal display Note If no buttons are pressed within approximately 8 seconds while in setting mode the unit will return to normal operating mode VIEWING THE INDOOR TEMPERATURE AND MIN MAX The indoor temperature is displayed in the second section of the LCD along with the indoor MIN MAX records INDOOR of cas Indoor temperature MIN indoor ioe max y MAX indoor temperature igw OJ temperature Notes The m
11. lusion of limitation may not apply to you For warranty work technical support or information contact La Crosse Technology Ltd 2817 Losey Blvd S La Crosse WI 54601 www lacrossetechnology com support z R amp TTE Directive 1999 5 EC or repair you will be charged for the repairs or examination The owner must pay any shipping charges incurred in getting your La Crosse Technology Ltd product to a La Crosse Technology Ltd authorized service center La Crosse Technology Ltd will pay ground return shipping charges to the owner of the product to a USA address only Your La Crosse Technology Ltd warranty covers all defects in material and workmanship with the following specified exceptions 1 damage caused by accident unreasonable use or neglect including the lack of reasonable and occurring during shipment claims must be presented to the carrier 3 damage to or deterioration o necessary maintenance 2 damage any accessory or decorative surface 4 damage resulting from failure to follow instructions contained in your owner s manual 5 damage resulting from the performance o repairs or alterations by someone other than an authorized La Crosse Technology Ltd authorized service center 6 units used for other than home use 7 applications and uses that this product was not intended or 8 the products inability to receive a signal due to any source of interference This warranty covers only actu
12. thrown in general rubbish collection poini S The manufacturer and supplier cannot accept any responsibility for any incorrect readings and any consequences that occur should an inaccurate reading take place This product is designed for use in the home only as indication of the temperature and other weather data This product is not to be used for medical purposes or for public information The specifications of this product may change without prior notice This product is not a toy Keep out of the reach of children No part of this manual may be reproduced without written authorization of the manufacturer All rights reserved This handbook must not be reproduced in any form even in excerpts or duplicated or processed using electronic mechanical or chemical procedures without written permission of the publisher This handbook may contain mistakes and printing errors The information in this handbook is regularly checked and corrections made in the next issue We accept no liability for technical mistakes or printing errors or their consequences All trademarks and patents are acknowledged
Download Pdf Manuals
Related Search