Home

What`s New page

1. Added support for specifying a mask of commonly used formats all elevation raster or vector in the FILENAME_MASKS parameter for the DIR_LOOP_START command Added support for excluding some filenames from a DIR_LOOP_START by adding FILENAME MASKS _EXCLUDE to skip files that match the FILENAME MASKS that you don t want Fixed handling of FILENAME MASKS for DIR LOOP _ START so that without recursing you get one record for each sub folder and not just a single record for the specified folder itself Added support for extracting a piece of a filename value by adding FILENAME _PIECE to the DEFINE_VAR script command specifying which piece to extract from the value i e DIR FRAME _WO_EXT FNAME PARENT_DIR Added support for automatically feathering to the coverage polygon of a layer by adding FEATHER_BLEND_POLY COVERAGE to the IMPORT or SET_LAYER_OPTIONS command This will calculate the coverage polygon for the layer and feather to that rather than requiring you to already have that computed Added support for generating an index file for tiled KML KMZ exports by adding KML_GEN_INDEX_FILE YES to the EXPORT_VECTOR command If you pass a script on the command line to Global Mapper and no license can be acquired just show a single message and exit rather than bringing up the full application Added support for disabling the write of the projection to an exported LAS LAZ file header in a script by adding NO_PROJ_HEADER YES to t
2. Improved classification to filter out likely buildings and trees before finding nearly certain ground points This fixes the common issue of the top of flat buildings being classified as ground points There are parameters controlling this on the ground classify dialog Tremendously sped up automatic classification of ground points The operation can be 20 times faster or even more on machines with a large number of cores Added option to ground classify dialog to filter the Lidar points that are considered as possible ground You can manually filter the points by elevation color scan angle etc Allow performing a ground point automatic classification just on selected Lidar points LIDAR MODULE ONLY Added option to Lidar LAS LAZ export to filter the export so that only points that are within a given elevation range near any one of a list of colors within a list of allowed classes within a scan angle range and or within a list of point source IDs are exported LIDAR MODULE ONLY Added option when gridding Lidar point clouds to filter what points are considered in the grid You can use that to grid only points that are within a given elevation range near any one of a list of colors within a list of allowed classes within a scan angle range and or within a list of point source IDs are exported For example you might use this to quickly create a ground grid from a Lidar point cloud LIDAR MODULE ONLY Added option to grid Lida
3. e Added option when drawing line or area arcs to have the arcs be a fixed radius rather than drawing them e Added option to use a template file when batch converting to new Polish MP format files e Added option to the Generic ASCII Import dialog to allow the specification of a column to break area line features on when the value of that column changes This allows importing formats like the Landmark polygon format that runs all of its features together but changes a feature index in a particular column to indicate a new feature e Allowed batch conversion to raster elevation export formats added via plugin e Added a new line type Digitizer Tool Line that controls the drawing style used when digitizing new line and area features with the Digitizer Edit Tool e Added option to the transparent color picker dialog for palette based files to save the palette to a pal file e Added built in support for the Tananarive Observatory 1925 and Yacare datums e Corrected datum conversions involving the Hermannskogel datum Fixed export to ECW format when export units are not arc degrees meters or US survey feet Fixed errors during lengthy exports to ECW files when data from online sources was loaded Fixed problems with not being able to change the label attribute used for Shapefile features that have a LABEL attribute associated with them Fixed reading of altitude values for waypoints in somee Garmin PCX5 WPT format files Fixed ren
4. e Allowed drawing of rectangle square circle and ellipse shapes anchored at the top left rather than center with the Digitizer Tool by holding down the T key when left clicking to start the shape e Projection Datum Changes o Added option to the projection selection dialog to allow a projection to be initialized from an EPSG projection system code o Made the parameters used for most grid system and zoned projections like British Grid and UTM be displayed in the attribute section of the projection selection dialog which will be disabled for those projections o Added support for the India Zoned Grid Korean Grid Krovak Lambert Marta Lambert NOAA Marta Satellite and Winkel I projections o Added built in support for the Dealul Piscului 1970 Ireland 1965 with 1975 Adjustment Korean Geodetic KGD Lisbon DLx S JTSK Solomon 1968 GUX1 Astro datums as well as a generic GRS80 ellipsoid datum o Improved accuracy of the Beijing 1954 Hungarian Datum 1972 HD72 NGO1948 and Portugese 1973 Datum 73 datums o Added Bessel Modified as a new built in ellipsoid o Added support for adding new ellipsoids to create custom datums from on the custom datums dialog o Fixed crash when exporting to some formats with the Old Israel Grid or New Israel Grid projections selected o Made the extra scale factor for State Plane projections be applied AFTER any false easting and northing values for the underlying projection for the St
5. for point labels that do not use the automatic placement setting Added support for displaying as metadata and using the contents of the GEOPSB record for NITF files to assign non WGS84 datums Made a report be generated and copied to the clipboard when performing a join operation from an attribute table to a loaded spatial table Fixed issues doing join of attribute table from DBF file with numeric fields e Fixed issue with JDEMs with large elevations and added support for directly loading gzipped JDEM files e Disabled display of pan cursors at edge of maps on Tablet PC devices e Added option to Arc ASCII Grid export dialog to export center rather than corner coordinates e Make feather blending with small feather distances i e under 20 or so smoother particularly on export e Added right click popup option to Control Center to invert selection e Update Polish MP export using a template MP file that uses Lowrance type mapping to write out Lowrance types to the new MP file e Improved elevation legend on main display and on path profile dialog for very small ranges of values such as when displaying non elevation data e Added support for specifying a DPI value to store when exporting a BMP file e Fixed problem exporting to OSM XML file that caused extra lt node gt to be written even when lt node gt element was closed in start e Added support for overriding the default maximum in memory vector to raster export size of
6. o Added support for feather blending elevation layers in order to smoothly blend the elevation values of one layer with an underlying one near some edge either a polygon or the rectangular edges of the top file o Added support for loading DMDF Digital Map Data Format files such as those used for Alberta DEM files o Added support for loading vector data from EMF Windows Enhanced Metafile files Added support for loading Erdas LAN format files Added support for loading PCX format image files Added support for loading point Arc Vector Coverage files lab adf Added option to the Vector Options dialog to allow selecting the attribute to use for elevation values for vector features This is useful if you want to get elevation values from something other than the default elevation field for a layer o Added option to the Digitizer Tool to split an area feature into 2 pieces along the segment connecting 2 selected vertices o Made the Search gt Search by Attributes Name Desc dialog be modeless so that you can interact with the map underneath the dialog without closing the dialog Added new Select All option under the Edit menu to allow easily selecting all loaded vector features Added support for loading files in a fixed location relative to the screen with the position of the file being specified in width or height percentage values or relative to an absolute latitude longitude value in addition to the previously available i
7. O the sub group name then each child layer under the main layer is added under that sub group Added NLCD 2011 National Land Cover Database 2011 built in online source Added new AVIATION CHARTS group that has some streaming VFR IFR charts for North America Added NOAA Digital Coast source for terrain and Lidar data along US coastlines Added new OpenStreetMap org Vector Map Download source under Worldwide Data group to take you directly to download of OpenStreetMap data for your area of interest Added Maine MEGIS sources under U S Data gt Maine group Updated OSM and TMS web format exports to include option to export directly to GMG Global Mapper Grid terrain tiles and also specify the tile size to use Updated OSM TMS Google Maps exports to automatically create a gm_source_def xml file that you can use to add the source as an online source using the Add Sources from File button on the online download dialog Added option to specify the Resampling Method to use when rendering downloaded source right on the online dialog This defaults to bicubic resampling to significantly improve the clarity of some sources at some zoom levels Added support for adding streaming TMS tiled online sources that are tiled to World Mercator Mercator with WGS84 datum instead of Web Mercator Added support for splitting Bing Maps exports up into a separate folder for each zoom level and row each image name is still the full quad name to avoi
8. ASRP and USRP data sets Added option to Simple ASCII Export to make style attribute export be controlled separately from data attribute export Added button to the custom shader edit dialog allowing the elevation value for an existing elevation color range be changed Added option to the Digitizer Tool when multiple point features are selected to identify any point features that are within a user specified distance of other selected point features This is helpful for finding duplicate points Display the height of any gridded elevation data in the status bar as you move the cursor around even if the cursor is near vector data the height will be appended to the nearest vector feature description When placing new point text features or moving a single point text feature with the Digitizer Tool make the point snap to existing features just like line and area features do when drawing them You can hold down Ctrl when placing the point to disable snapping Made CSV files created by the Lowrance SonarViewer software be automatically detected and loaded rather than prompting the user for input parameters Added option to CDF export to allow exporting coordinates in either the current projection system or lat lon Allowed DTED files with invalid column numbers in the data record to be loaded Added support for loading Geosoft Grid files with right handed vector orientation Added automatic detection of world files that have an extra txt appended
9. Faster drawing of large Lidar point clouds by using multiple cores processors Much faster drawing of reprojected Lidar point clouds when zoomed out so the point cloud takes up only a tiny part of the screen Added new option on Lidar Options dialog to control the brightness when coloring by intensity Added support for new ASPRS classifications 40 45 from Topo Bathy Profile for bathymetric points Support exporting Lidar point cloud data to DGN and PDF files Improved the reported density figure points per square meter on the metadata dialog for Lidar point clouds Now the point cloud is chopped up into a grid and the count of points in each piece of the grid is used to calculate more localized densities then those are analyzed to get a good representative density that skews towards the denser parts of the cloud This is especially improved for point clouds with large areas of no data as those no longer bring down the calculated density Fixed bug editing Lidar points from some Lidar files particularly ASCII Text or MrSID Lidar LAS LAZ editing was not affected Fixed bug that caused RGB colors to not display for point clouds with less than 512 points Fixed bug that would cause the scan angle to be reported incorrectly for some points in very rare cases Fixed crash loading LAS LAZ files with an invalid but non zero date in the header Fixed bug with elevation values being multiplied by 100 when exporting part of a point cloud to a GMP
10. Made the results in the Search dialog be sorted in a case insensitive manner if the box to do a case sensitive search is not checked Added the ability finally to edit the description of features using the feature edit dialog the CALC ATTR option from the Control Center or the EDIT_VECTOR script command Made relative paths on UNC network paths work from workspaces and map catalogs so that you can now move workspaces around and share them from different locations even when referencing UNC paths those that start with Updated the option to view the current view in Google Earth to have the option to include any selected features Add support for copying entire vector layers to the clipboard by selecting them in the Control Center and pressing Ctrl C You can then paste them to a new layer or instance of Global Mapper by using Ctrl V Added prompt when loading a non georeferenced BMP GIF JPG PNG or TIFF file to have an option to load as a picture point instead of manually rectifying or faking position You can then select the point to place the image on the map Made coverage bounding boxes created for cropped raster layers follow the bounds of the crop area rather than the bounds of the uncropped file Improved the default Recent File Types filter to always include some very commonly used formats like tif shp kml las etc Fixed clipping of 3D lines to interpolate new Z values along clipped segments Added support f
11. Tiger Line files e Added option to the Vector Display tab of the Configuration dialog to Hide Labels that are Partially Offscreen This makes sure that you always get complete labels and is very useful if you are gridding vector data being exported to a raster format to ensure that you get a seamless set of tiles WHAT S NEW IN Global Mapper v8 01 e Added new tab to the Options dialog for some multi spectral raster files currently only GeoTIFF files with more than 3 bands of data and Erdas IMAGINE ECW JPEG2000 and MrSID imagery with 3 or more bands of data to allow controlling which bands are used for the red green and blue color channels during display e Added support to check for new releases of Global Mapper both automatically and manually using a new Help menu option e Added support for feather blending raster data to a polygonal boundary rather than just along selected edges This makes it much easier to feather blend the border of a large collection of adjacent files e Added option to associate a list of default attribute value pairs with each area line and point classification on the Styles tabs of the Configuration dialog If a default attribute list is provided for a type any new features created with that type using the Digitizer Tool will automatically add those default attribute value pairs e New Import Export Formats o Added support for loading DWG files o Added support for importing data from WAsP map format
12. and SQUARE_CUSTOM_ lt SIZE gt _ lt RED gt _ lt GREEN gt _ lt BLUE gt where the lt SIZE gt value is the radius in pixels of the dot or square and the lt RED gt lt GREEN gt and lt BLUE gt values represent the color to use Made any text rotation and size be obeyed when loading DXF files Made fixed size text and text rotation angles be saved to exported DXF files Added inches as a supported elevation unit Made township range section and meridian values be recognized from additional attribute values when exporting to Platte River Survey files Made batch converting from LIDAR and TerraScan formats to gridded elevation formats work Added support for additional NTF grid formats like the LandRanger DTMs Added new right click option to the Measure Tool to save the current measure text to the Windows clipboard Added option to show pixel coordinates of the current mouse location in the topmost raster layer in the status bar This option is in the Advanced Options section on the General tab of the Configuration dialog Added new option to the Advanced Options section on the General tab of the Configuration dialog to specify that default display label fonts should use the OEM character set code page 437 rather than the ANSI character set code page 1252 This option can be helpful if you are having problem with accented characters not displaying correctly from some data sets those data sets encoded in code page 437 rather than 1252 A
13. directives to change the name of Placemarks Fixed rare problem with a handful of iso height areas not generating properly during contour generation No longer break lines over 256 vertices into smaller pieces on export to the Polish MP format as cGPSMapper can now properly handle lines of any length Made double clicking on layers in the Overlay Control Center bring up the Options dialog for that layer If you hold down the M key when double clicking the Metadata dialog will appear instead Added support for the Swiss Grid projection in ECW files Fixed problems batch converting Lidar LAS format files to some other formats like Shapefiles Made automatic DRG style collar cropping work for high latitude Canadian topo maps Added support for loading MSI Planet files with a dat extension Made GML files from the UK Ordnance Survey load Allowed border and line widths up to 30 pixels wide up from 10 to be selected Updated raster elevation import plugin API to allow the plugin DLL to notify Global Mapper that the data in a layer has changed and needs to be redrawn thus allowing for dynamically updating layers Updated raster elevation export plugin API to add an EP_ExportEvent function that is called whenever an entire export operation is started and ends Reduced memory requirements for loading and displaying CMYK TIFF files Dramatically sped up the process of moving overlays to the top and bottom of the draw order when there are a lot
14. names like lt Feature Name gt Added support for including a filename suffix when cropping an export to a list of polygons Add a POLYGON_CROP_FILENAME_SUFFIX to specify text to include after the attribute value but before the file extension in the output filename Added support for controlling whether or not areas with the same filename attribute are combined when doing a POLYGON_CROP_USE_EACH operation Now POLYGON_CROP_COMBINE_DUPS handles this Added ALLOW_COMMA_DECIMAL parameter to EXPORT_VECTOR command for Shapefiles to control whether or not a comma can be treated as a decimal when detecting floating point fields Added support for exporting area and line features to CSV files with EXPORT_VECTOR by adding POINTS_ONLY NO as a parameter Support providing a custom precision and no data value for Arc ASCII Grid exports with the EXPORT_ELEVATION command using VOID_ELEV and PRECISION parameters Made cancelling an individual grid cell export for EXPORT_ELEVATION or EXPORT_VECTOR cancel the entire script immediately list it already does for EXPORT_RASTER Added support for supplying the flight date for an exported Lidar LAS LAZ file with a FLIGHT_DATE parameter for an EXPORT_VECTOR or EXPORT_ELEVATION script command Added support for KEEP_ZERO_AT_ZERO parameter for GENERATE_WATERSHED command to allow disabling the option to keep zero ocean elevations at 0 height for flow modeling Added support for specifying the projection to use fo
15. 3D vector data sets This problem was introduced in the v8 02 release Added a new right click option to the Overlay Control Center to allow you to save a workspace file containing just the selected layers and their settings Changed export of transparent areas to new 24 bit RGB PNG files to use an alpha channel rather than a single color transparency as some applications only support the alpha channel method Fixed error loading some RPF i e CADRG CIB data sets Fixed file size error loading some Geosoft Grid files Made Global Mapper workspace gmw files be loaded from archive files zip tar gz etc If any gmw files are encountered and loaded from a workspace file no other data files will be loaded from the archive file Made it possible to rectify MrSID files with the File gt Rectify Imagery menu command Fixed error loading some DGN v7 or older files with tags in them When digitizing new area line and point features notify the user if their features will not be displayed immediately after creating it due to vector display settings Make the default attribute list for the default classification be properly initialized when digitizing new features Make sure that the user wants to switch away from the Digitizer Tool if doing so would result in the loss of a significant number of digitized points Display progress while saving workspace files Added support for reading vector features from KML files that use multiple Schema
16. Bing Maps VirtualEarth export to use proper zoom scale names e Fixed error exporting DGN files with a projected system not using meters as the ground units e Fixed rare problem encoding negative elevation values to Global Mapper Grid files e Made water drawn in the 3D view use the water color configured on the Vertical Options tab of the Configuration dialog rather than always being blue e Fixed problems with path profiles generated over online elevation sources when the path spans more than one screen s worth of data e Added option to fill small gaps in data when batch converting to raster image formats it was already there when converting to elevation formats e Added support for providing symbol rotation angles in attribute fields named ANGLE or SYM_ANGLE e Fixed problems with missing per vertex elevation values for some area features from DGN files e Fixed bug in v12 00 release that caused contour areas to only cover part of the data set in many cases e Updated XYZ Grid export of elevation layers to reduce number of decimal digits saved in some cases such as for integer values e When splitting line features with an id attribute at a vertex clear the id attribute on all but the first new segment so there won t be duplicate id values e Greatly sped up the load and display of RPF Raster Product Format data sets like CADRG and CIB e Made BMP exports be done as bottom up BMP files to make them comp
17. ISELAND_AREA attribute Also subtract the area of those islands away from the total polygon area stored in the ENCLOSED_AREA attribute to give a true representation of the actual area covered by the polygon Greatly improved the load speed and reduced the memory requirements for most BMP format files Improved auto assignment of type names based on feature descriptions when loading DXF files to handle type names with spaces or underscores in them Fixed error when saving a workspace file containing a map catalog with auto collar cropping enabled Fixed problems decoding NMEA GPS streams where the only valid sentence is the GPRMC sentence Fixed problem with the label background for labels set to display with filled backgrounds being white rather than the current view background color in some instances when raster or gridded elevation data is also being displayed Made the size of the vector search dialog be remembered between runs Allowed ECW and MrSID files without embedded positioning information to use positioning information from additional sources like world files Replace underscores with spaces in waypoint names loaded from CompeGPS format files Made symbols for waypoints from CompeGPS files be automatically set if the symbol name for the waypoint matches a Global Mapper symbol name Fixed restoring of default drawing styles for area and line features from the tabs of the Configuration dialog This has been broken since the v6 08
18. Lidar point cloud draw styles using LIDAR_DRAW_MODE and LIDAR_POINT_SIZE parameters for IMPORT command Added support for adding USE_8BIT_CLASSES YES to EXPORT_VECTOR command when exporting Lidar LAS 1 1 1 2 files to export full 8 bit classes despite the limitations of the format Added support for saving the flow accumulation grid when using the GENERATE_WATERSHED script command by adding SHOW_FLOW_ACCUM YES as a parameter e Online Source Changes O Fixed major bug with lockups when viewing the NED 1 3 arc second and SRTM terrain data sources that are hosted on globalmapper com Updated download of online imagery to have an option to control whether or not the source is cropped just to the specified bounds or if panning around the data set is allowed The default is now to make the entire data set available for panning and zooming Default WMS sources to no longer use tiles for display by default which speeds up access dramatically in many cases Added option to add all of the layers from a single WMS source by selecting the top level layer entry This worked before by combining all layers into a single entry Now you have the option to do that or to create a separate layer for each one Dramatically sped up downloads from WMS WMTS servers that are missing data at some zoom levels Added support for local tile OSM TMS Google Maps sources with file URLs Removed the built in Nexrad US radar imagery source that was no longer wo
19. O Added support for adding online sources that use the Google Maps tiling scheme like a lot of ArcGIS tile sources and Nearmap imagery from Australia Added support for loading data from WCS Web Coverage Service data sources using the File gt Download Online Imagery Data menu command Updated creation of equal value areas to allow selected just a single color value to create areas for rather than creating equal value areas for all selected colors Added new right click option to Control Center to allow splitting a loaded vector layers into new layers based on the feature description type name or any attribute value The new layers will automatically be grouped under the original layer name Added additional built in line styles including several new Dash styles with different dash sizes and spacing Updated creation of strike and dip points to allow dragging along the strike dip direction when placing the points to automate selection of value e New Supported Formats O O O Added support for loading ioGAS gas point files Added support for loading Lowrance USR v4 format files Added support for exporting point features to Lowrance USR v4 format files e Projection Datum Changes O O Added built in support for NAD83 CSRS Canadian Spatial Reference System datum transformations with grid shifts initially supported for Alberta British Columbia New Brunswick Quebec and Saskatchewan Added built in support for Comban
20. Online Source Changes O Added support for adding WFS Web Feature Services online data sources for dynamically loading online vector data sources Added support for adding WMTS tiled WMS online data sources Improved display of online sources at some display scales and also use less imagery for some DigitalGlobe exports Added button on DigitalGlobe client ID specification dialog to allow easily estimating how much premium DigitalGlobe imagery that you would need to purchase for a particular export size and resolution Also show coverage for each DigitalGlobe source as you highlight it in the source list Added new SRTM terrain source hosted on globalmapper com that is more reliable and much faster than the previous source hosted on a NASA JPL server The old source is still available with the text Backup Source at the beginning of the source name just in case the new source is ever not available for any reason Added support for merging WMS sources comprised of multiple layers into a single download if the WMS server supports it This is useful for vector data available as different layers Added drop down lists to explicitly select the projection and file format to use when creating new WMS WMTS sources so that you don t have to provide it as part of the service name anymore if you want something other than the default Added support for adding custom tile based sources that use quadtree naming like Bing Maps You just specify a
21. Quebec o Updated Hotine Oblique Mercator RSO projections that use Azimuth Point parameter to save to PRJ files as Longitude_of_ Center rather than Central Meridian so that Esri products will recognize it o Use TOWGS84 parameters in a WKT PRJ file to select an appropriate datum specialization for datums like ED50 that have lots of transformation parameters available o Use TOWGS84 parameters in a WKT PRJ file to select an appropriate datum specialization for datums like ED50 that have lots of transformation parameters available o Updated New Israeli Datum transformation parameters based on official values from Israeli authorities o Added support for using a default prj file in the App Data folder see Help gt About dialog to set in addition to the exe file path e Updating pasting of features to show a dialog allowing you to control what layer the features on the clipboard are pasted to You can now either paste to the original layer if still loaded always create a new layer paste to the User Created Features layer or select a loaded layer to paste to There is also an option on the Edit menu to control whether or not the paste options dialog is displayed or if the last selected option is used e Reorganized the File menu to reduce its size including moving the export commands to a popup menu and grouping some other related functionality together in addition to moving spatial analysis functions like contour generation and
22. START as an IF statement to conditionally execute a block of commands Updated COPY_ATTRS command to allow copying from areas to areas Added support for replacing text strings within feature attribute values using the EDIT_VECTOR script command and a new ATTR_REPLACE_STR parameter This allows you to replace one text string with another in a particular attribute value or feature label for all features matching a search query Added support for extracting more pieces of the path to the current file inside a DIR_LOOP_START DIR_LOOP_END You can now use 7 PARENT_DIR1 to get the grand parent folder 7PARENT_DIR2 to get the super grand parent etc Added support for including SPLIT_ATTR in the EXPORT_VECTOR command when splitting by attribute so that you can use the split attribute value in the export filename path Added support for deleting all attributes except a list of allowed attributes with EDIT_VECTOR You can provide one or more ATTR_TO_KEEP parameters to specify which attribute s to keep Added support for specifying the export row and column order for XYZ grids exported with EXPORT_ELEVATION using new EXPORT_ROW_MAJOR REVERSE_COLS and REVERSE_ROWS parameters Updated cropping to polygons during export to support any special attribute name for POLYGON_CROP_NAME_ATTR and POLYGON_CROP_FOLDER_ATTR The previous lt Area Display Label gt and lt Area Source Filename gt still work but are deprecated in favor of the standard
23. a North Arrow in the 3D View Use the C shortcut key to turn it on and off Added option to turn hill shading on and off for individual terrain layers rather than sharing the global hill shading option Added option to right click menu in Swipe Tool to swipe the image that was right clicked on This helps you easily swipe away an image you want without knowing its name Made option to zoom to a selected layers be the first item in the right click menu for a layer in the Control Center Made any custom shaders in use be saved in workspace files DEFINE SHADER command so that if you use the workspace on another machine the custom shader will be display the same way on the other machine Updated exports of terrain where the displayed elevation range is based on what is in the display to also do the same for what is in the total export Made last used Map Layout no longer be remembered between sessions by default There is a new checkbox option on the bottom of the Map Layout dialog if you do want it to be remembered like before otherwise it will still save to workspaces as usual but you will get a default map layout whenever starting a new session The distance and elevation scale enable disable state will be remembered regardless Greatly sped up cropping raster elevation layers to complex polygon features from the Cropping tab of the Options dialog for the layers Add option to Info Tips configuration to allow displaying the elevation co
24. a bottom up rather than a top down bitmap since some applications including Global Mapper can t read top down bitmaps e Fixed problems batch converting to Shapefile format and exporting to the source file folder when the input files are either archives e g zip or tar gz files or the output is being gridded e When using the Add Loaded Files or Add Onscreen Files buttons in the batch conversion dialog and map catalog files are loaded made the maps referenced by the map catalog be added to the convert list if they are of the right type e Fixed loading of attributes from some DBF files that had padding bytes after the DBF header e Added support for decoding DMS lat lon values which use a hyphen as the separator e Sped up the export of raster and elevation files when only a subset of a large number of files is being exported e Fixed really slow drawing of some rotated BSB files e Fixed vertical flip of NTF format grid files e When exporting MapInfo MIF MID format files made area features be fully cropped to the specified export bounds rather than just exporting in whole any area that intersects the export bounds e Made line and area border widths be stored correctly in MapInfo MIF MID files e When using area features with elevations as obstructions for view shed calculations make the tested receiver heights inside area features just be based on the terrain and only use the area heights as obstructions This ma
25. access only when exporting and just browsing using free watermarked imagery When creating a new line with distance bearing COGO input display a bullseye at the line start location When creating a new line with distance bearing COGO input and a single point feature of line area vertex is selected give the user the option to start the line at the selected point vertex Fixed problem with creation of distance bearing COGO line by right clicking in the Feature Info dialog not working Made elevation display units setting from Vertical Options tab of the Configuration dialog be remembered between runs Fixed bug in Lidar LAS export with the wrong sentinel value being written for variable length records used to store projection information Fixed problems loading 3D polyface meshes from DXF files Added support for transparency i e alpha channel from tiled TIFF files and TIFF files with something other than 3 bands of data Made 3D path profile remember sample count setting if changed Added new option to not get elevation values from any attribute on the vector type options dialog This will allow elevation requests on export to fall through to underlying elevation data for data sets that already have elevation attributes Fixed error in calculating cut and fill volumes along a line feature Added V shortcut key to toggle the display of vector layers on and off Updated Save Workspace As option to default the filename to the existing w
26. and the label font when exporting Added new option to buffer creation to just create rectangles the given buffer distance from each segment of an area or line feature rather than creating a single buffer for the entire feature with curved edges and ends Updated path profile dialog with a line of sight to allow drawing multiple Fresnel zones and also drawing a line at each transmitter location from the terrain surface to the transmission height Added new option to contour generation to create the contour lines as the terrain passes to the contour height from above it rather than using the default of creating it when the terrain goes from the contour height to lower elevations Added right click menu option to map catalog dialog to allow zooming the view to the selected maps Updated finding of equal value areas for a terrain layer to use slope values if you currently have a slope shader enabled for the layer rather than elevation values Updated Styles tabs of the Options dialog for a layer to allow selecting multiple values for attribute based styles at once for deleting or changing the style for Allow cropping to a selected area when exporting to MapInfo MIF MID or TAB MAP files Added support for reading KML attributes from lt SimpleData gt tags Added support for reading and writing KML lt TimeStamp gt tags Fixed long standing issues loading many types of JPEG2000 files particularly large NAIP imagery files that used to lock up or
27. areas with zero elevation so that you can easily calculate view sheds over ocean tiles Allowed for the same text label for point and area features to be displayed multiple times in the same area of the screen so long as they don t overlap Sped up calculation of contrast adjustment statistics for some very large images Prevent display of Map Data Not Available tiles when working with online data sources like World Imagery that don t contain data at all zoom levels at all locations Added option when batch converting to MapInfo formats to control whether or not NAME attributes are added Added support for automatically using a gcp control point file accompanying an image file to rectify the image when loading it Added option to control whether or not sub folders are searched when loading all files from a directory tree Made the load of some palette based raster formats like TIFF files look for more descriptive palette files in the same folder as the TIFF file to improve the text display on the status bar Added option to Global Mapper Package exports of vector features with associated image files like points from EXIF JPG file to actually embed the associated images inside the package file for easy transport Updated S 57 to support inland waterways types Added support for some curved arc segments from ESRI File Geodatabase GDB data Improved support for TextString rectangles from ESRI File Geodatabase GDB files N
28. as a SOURCE_ID attribute and can be searched on and you can choose to load just a particular source ID when loading Lidar files LIDAR MODULE ONLY Allow adding favorites toolbar option to set any O Lidar classification from 0 20 so you can add 1 click or keyboard shortcut access to reclassify selected Lidar points to any classification that you need LIDAR MODULE ONLY Added option to automatic classification of ground points to reset any pre existing ground points to unclassified for the operation This is useful if you want to re run the operation with different parameters and start from scratch Correct Lidar point classifications between 10 and 17 to match ASPRS definitions for example 10 is Rail not Bridge and Bridge is 17 Also added classification code 18 for High Noise points LIDAR MODULE ONLY Fixed binned gridding of Lidar data after load from Analysis menu to obey a bin spacing provided in current projection units rather than as a multiple of native point spacing LIDAR MODULE ONLY Improved automatic classification of ground points for multi return data by only considering the last return of each pulse Allow export of Lidar point clouds to PLS CADD format files Fixed error when discarding points outside of some range in standard deviations from the mean on load Fixed error saving workspace with modifications to a Lidar point cloud if all Lidar classifications in the point cloud are turned off on the Lidar Configur
29. ask the user to confirm it if we can t determine the datum from some other source rather than just assuming the datum is WGS84 Added ability to generate black and white GeoTIFF files that use black for the minimum value rather than white To do this select the Grayscale Min Is Black palette option when exporting a black and white GeoTIFF file Made auto collar cropping work correctly for 1 63K scale Alaska DRGs Improved dialog that appears when TerraServer connections fail Made point features with labels be exported as TEXT entities to DXF files rather than either being split up into separate POINT and TEXT entities or being created as a POINT entity with attributes e Improved display of elevation lines in the path profile dialog when the elevation range is small e Fixed problems with the wrong font being displayed when editing custom area line and point types from the Configuration dialog e Corrected datum used for VPF e g VMAP DNC data NAD83 was being used when it should have been WGS84 There was no position error however as those datums are the same positionally e Fixed problem with the zoom scale changing after a print preview e Fixed problem with grid lines not being saved to raster files or printed if no other vector data is loaded e Allowed correct loading of elevation TIFF files that don t correctly specify their min max elevation range e Added option to clamp values outside the valid elevation range to the specif
30. batch convert operation Allowed positioning data from Ozi map and CompeGPS imp files to be used to position ECW files that do not contain embedded positioning information Corrected positioning of some non WGS84 MapTech maps In some cases the wrong datum would be used Now if there is any doubt the user is prompted to select the correct projection Made user defined projections be automatically decoded from MrSID files Fixed export of NAD83 datums to Erdas Imagine format files Made French Lambert projections be decoded and encoded from to ECW files automatically Improved positioning of NOS GEO format charts by positioning them using the specified native chart projection if recognized When using the GENERATING_CONTOURS script command allowed negative intervals to be specified if the SINGLE_LEVEL_ONLY YES parameter is specified Fixed half pixel shift and other positioning problems when exporting to new Float Grid format files Fixed errors loading text from some single precision E00 files Dramatically sped up the calculation of auto contrast statistics for large MrSID files When loading MapInfo MIF MID format files don t set any numeric fields to have a value of O when their value is actually empty Fixed bug from v7 03 release that could cause discontinuities in rectified imagery that used the triangulated rectification method When displaying feature information for polygon features that have islands holes include the area of
31. being buffered Made Cancel button actually work when cancelling the creation of multiple buffer areas around selected area and line features with the Digitizer Tool Updated creation of regular grid cropped to area to include cells where the center isn t inside the crop area if the option on the Advanced section of the General tab of the Configuration dialog is checked to keep pixels if any part is in the crop area When connecting points into line features and all of those points have elevations and or timestamps add per vertex elevations and or time stamps to the new line Update Distance Bearing COGO dialog to support COGO text files with tabs and also to support files where only some lines are recognized COGO distance entries Prompt users for the units for distances in distance bearing COGO files that don t explicitly provide units Updated the calculation of area and line elevation statistics to include the position of the minimum and maximum elevation found within the area as separate X and Y attributes rather than a combined coordinate pair for each to make it easier to load back in as points Allowed calculation of elevation statistics for 3D lines even if no terrain data is loaded Added option to create points at the intersection of line features when finding splitting lines at intersections using the Digitizer Tool Added keyboard shortcut so holding down J when selecting multiple vertices with the Digitizer Tool automatical
32. by adding APPEND_TO_FILE YES to the command You can also add a custom header line with a new HEADER parameter and add an extra blank line with ADD_BLANK_LINE YES o Added option to SPLIT_LAYER script command to make the description for the new layers just the attribute value instead of also including the original description Add LAYER_DESC_ATTR_ONLY YES to enable this o Added SCALE_XY_AS_TENTHS and SCALE_Z_AS_TENTHS parameters for the EXPORT_VECTOR command when exporting to SEGP1 They provide the same options that the interface has when exporting SEGP1 files o Made PRECISION parameter for EXPORT_VECTOR script command also work for SVG exports o Added support for customizing the color format used for GENERATE EQUAL _VAL_AREAS command with new ATTR_FORMAT parameter o Allow specifying colors as raw integers or hex representation like RRGGBB o Made GEN_TAB_FILE work when exporting to ECW or JPEG2000 files with EXPORT_RASTER command o Made DEFINE_VAR prompts shown when running a script in batch mode from a command line if no default value is provided or the prompt is for a directory or file o Fixed save of world file from EXPORT_ELEVATION script command to specify correct spacing and corner o Made Run Script dialog title bar show the filename of the script that is loaded o Allow using letters for PRODUCER_CODE for CADRG CIB exports with EXPORT_RASTER o Added support for adding USE_CENTER_COORDS for ARCASCIIGRID export wit
33. calculation to include the slope as percent grade in addition to degrees Updated the line elevation statistics calculation to include the maximum slope both up and down and well as the total elevation gain and loss along the line These things are useful for evaluating hiking and biking trails Added item to right click menu for scale bar to zoom to a user specified scale Made more print settings like header scale etc be remembered between runs When batch converting files that are loaded in the current workspace copy any color grade or resampling settings from the loaded layers Made the contour generation checkbox options be remembered between runs Fixed import of per vertex elevations when breaking on the change in a particular field during generic ASCII text file import Added support for some additional non comforming SEGP1 formats with only easting and northing values Fixed positioning of PDF files with rotated orientations and embedded world file coordinates Fixed issue with Bing Maps exports with just a single level of data not displaying in the web browser Made vector search dialog not automatically redo search when an item label or attribute is changed This allows faster editing in place you just have to trigger the re search yourself Added support for adding a point feature s latitude and longitude to the description string for the point in a KML file by using the lt Longitude gt and lt Latitude gt entries i
34. clicking on a line type on the Line Styles tab of the Configuration dialog bring up the default attribute list for that type Made double clicking on an attribute on the default attribute list dialog for a type automatically bring up the edit dialog for the selected attribute When creating point features from selected line vertices and the line has per vertex timestamp values add a TIMESTAMP attribute to each new point Allowed selection of only vertices from already selected line or area features by holding down the S key when left clicking or dragging a box in the Digitizer Tool Write more precision for sample sizes in exported Gravsoft Grid files to prevent problems with large files exported with degree units Made Configuration dialog remember the tab it was on when last closed Fixed bug in placement of TerraScan LIDAR files with non default origin or units Made import of marine features from MP files using extended type notation Ox01XXXX correctly have MARINE Y attribute added Fixed smoothing of area features to behave the same as smoothing a line feature with the same boundary Added support for specifying prefix text when creating points spaced along a selected line or area feature with the Digitizer Tool Added support for tracking NMEA GPS devices that don t separate the NMEA sentences with newline characters Made area features created from lines in the Digitizer Tool automatically have measure attributes added to them Fi
35. combining terrain to their own menu e Added option for displaying the bearing of line and area segments on the map on the Vector Display tab of the Configuration dialog e Added option to calculate the areas that drain to and from selected line features when performing a watershed analysis e Added option to watershed calculation to discard any stream stub segments i e short segments at start of flow path below a certain length threshold e Updated watershed calculation to make the streams 3D lines and ensure that the stream elevation always flow 100 downhill even through depressions e Updated watershed calculation to save an input flow attribute IN_ FLOW for each stream and also renamed the MAX_FLOW attribute to OUT_FLOW e Updated map catalog dialog to have a checkbox next to each map so you can disable maps without removing them from the map catalog added 14 0 1 release e Added new custom Half Pie and Half Pie Empty point symbols that allow for custom sizes and colors for the same shape of symbol Allow overwriting loaded Shapefiles with large DBF files Previously you would get an error if trying to overwrite them if they were currently loaded due to the DBF file being held open Added option to specify a bounding box to load when loading Lidar point cloud data Useful for limiting your load to just a small region for very large Lidar files Added option to GPS menu to draw a ring around the vessel location of a user specifie
36. depth be displayed in the metadata list for MrSID and NITF imagery Added support for WMS servers using secure HTTP i e https addresses Improved accuracy of area calculations when using the Mercator projection Updated WASP map area export to support roughness values in a RV attribute in addition to ROUGH_L and ROUGH_R Write out LOCAL as the projection name when exporting ECW files using a projection that is not recognized for storage in ECW files Added support for per vertex elevations for area features from Shapefiles in all cases previously only simple areas with no holes were supported Made the calculated error at each control point in a rectification be saved in a GCP file saved through the File menu on the rectification dialog It will be the last column for each control point Improved great circle distance calculations by using the more accurate Vincenty algorithm Fixed remaining problems loading portions of some Erdas Imagine img grid files with floating point samples Fixed bug with image optimized palette selection generating 24 bit RGB PNG and Erdas Imagine files when batch converting to those formats Fixed problem with gap showing up between lines that end at the same location Added built in point types for bank and restaurant e Added built in line type for invisible boundaries such as those commonly found in Tiger Line files e Fixed rare problem with very long vector lines or large area features not prin
37. element IDs for lines these are very rare When exporting DXF format files made area features be fully cropped to the specified export bounds rather than just exporting in whole any area that intersects the export bounds Fixed ordering of data written to GPX files to make sure that really picky applications like Garmin s MapSource can always read them Fixed problem when doing multiple line connection operations from the Search by Attributes dialog that would result in extra long lines they would loop over themselves after the first line connection operation Made Longitude of Pole attributes for Polar Stereographic projections be saved and read from PRJ files Added support for a BOTTOM_UP parameter in BIL file headers to specify that the data starts at the lower left rather than the top left Just add a line with the text BOTTOM _UP Y to the hdr file to flip the data vertically Added a LAYER_DESC parameter to the GENERATE_CONTOURS script command to allow the name of the generated contour layer to be changed from the default Fixed problem with point features getting the wrong attributes from some E00 files Made holes in area features maintain the descriptions of their parents when exported to ASCII text files Allowed minus signs dollar signs and underscores to be used at the start of labels when exporting to DXF format files Previously those characters were removed from the start of lines to prevent errors Now a
38. error free This prevents any errors during a workspace save from wiping out an existing workspace file that was being overwritten e Added additional progress reporting when batch converting files e Dramatically sped up the loading of map catalog files with lots of files in different projections e Fixed problem with scale being slightly changed when printing to scale with a header and or footer e Made State Plane projections with NAD83 HARN HPGN datums be properly saved and loaded from PRJ files e Added support for loading ECW and JPG2000 files with more than 8 bits per color channel including elevation based files e Made the TIFFTAG SAMPLEFORMAT value be written out for 16 bit elevation TIFF files so that ESRI products can properly read them when negative values are present Added option to skip files for which the projection cannot be automatically be determined when batch converting files Added support for decoding some additional NITF imagery formats in particular 2 band 16 bit per band imagery Added POSGAR94 Argentina datum Fixed bug in gridding while exporting with an overlap percentage specified that caused the overlap to not be applied to the right or bottom sides of some files when splitting up the export to a fixed ground size Added support for loading MrSID imagery with more than 8 bits per color channel Fixed display of ADRG ASRP USRP data sets with 4 bit count RLE compression Added option to the Vector Display
39. exports cropped to areas with a large number of vertices Updated to save user settings in Application Data area of Windows rather than in Program Files folder This is more in line with the requirements of newer Windows versions like Vista and Windows 7 The location of your user data folder will now also be displayed on the Help gt About dialog Allowed modifying the options for multiple selected vector layers and the User Created Features layer from the Control Center Added new option to vector KML KMZ export to allow specifying that the feature description be based on custom HTML text that can include attribute values and other feature information in whatever manner the user deems appropriate Added new option to vector KML KMZ export to allow specifying the character encoding to specify in the header This is useful if you are exporting things like UTF 8 text to KML files Added much better looking 24 bit color toolbar buttons thanks to Bruno Bellazzi for these You can switch back to using the older higher contrast toolbar buttons using an option under the View gt Toolbars menu Added toolbar button to restore the last drawn view Added new right click option to the Control Center to allow ordering the loaded layers by resolution or by the bounding box of the layers Added button to copy the contents of the Feature Vertices to the clipboard as text Added reporting of DPI to metadata for Geo TIFF files When batch converting from TI
40. feature does not have a particular attribute in its own attribute list this was already being done for the MP_TYPE attribute but has now been extended to all supported MP attributes like PERIOD for light points Fixed problem with icon symbols not being correctly exported to Polish MP files if the export was based on a MP template file using a LBLCoding value other than 9 Sped up exports to ECW and JPEG2000 files from map catalogs Fixed snapping to existing line and area feature boundaries when the data being snapped to is in a different projection than the current view projection Made the display label for selected area features be displayed if the option to only highlight the border of selected areas is selected Improved default elevation unit selection when loading multiple files so that it doesn t always default back to meters Fixed problem with some grid line labels being drawn at strange angles Added new SPLIT_BY_LAYER parameter to the EXPORT_VECTOR command in the scripting language to allow splitting Shapefile exports into files based on the layer type of each feature When drawing new line and area features with the Digitizer Tool render the vertices if we are displaying the vertices for other line and area features Made the Feature Info dialog display the enclosed area in addition to the length in the Geometry field for closed line features Allowed band selection for NITF imagery with 3 or more bands of data Made the bit
41. file with the export elevation units set to Statute Fixed bug with the displayed elevation range not updating when changing the elevation units for a loaded Lidar layer e Analysis Function Changes O O Improved path profile line of sight paths that cross areas of no known elevation so that the path is smoothly interpolated between the surrounding valid elevations rather than showing 0 for invalid locations Fixed problem with very large view shed calculations and very small clearance at the view shed center that resulted in a strange pattern of blocked samples in the outer parts of the view shed Fixed problems with the creation of polygon coverage for area and line layers that O could cause the coverage to cross through some long straight segments Allow editing the parameters and recalculating multiple view shed layers at once from the Control Center Previously you could only edit and recalculate a single view shed layer at a time Added display of the total elevation increase and decrease along a path on the 3D path profile details Fixed crash in path profile when creating a new point feature along the profile and assigning it to a new layer rather than an existing one Added checkbox option to view shed calculation to control whether or not to treat invalid missing elevations as ocean height of zero Fixed issue in v14 2 with odd island creation in view shed coverage and equal area coverage creation Fixed issue in v14
42. files o Added support for exporting lines with elevation and or roughness values to be exported to WAsP map format files for use in the WAsP wind analysis application o Added option to export survey section i e section township range area features to Platte River ASCII Digitizer format files o Added support for exporting gridded elevation data to PGM format grayscale grid files o Added support for loading NTF format contour files as supplied by the UK Ordnance Survey o Added support for loading KINGDOM planimetric polygon files like those used by SMT Seismic Micro Technology software e Image Rectifier Changes o Added option to shift all of the control points for a file when rectifying imagery or vector data This effectively provides an easy way to shift a file by a given distance o Added Apply button to the image rectification dialog to allow the results of repositioning a layer to be immediately seen in the reference map window e Digitizer Tool Changes Added option to the Digitizer Tool to automatically create vertices at the intersections of selected line features Improved behavior of vertex insertion into area and line features so that the new vertex is inserted at the clicked location rather than the nearest point on the feature to the clicked location When inserting new vertices in selected line and area features with the Digitizer Tool automatically select the newly added vertices to allow easy moving and joining
43. files in those formats with transparency built in e Added button to the toolbar for the Search gt Search by Attributes menu command e Added option to add X and Y coordinate attributes to selected point features via the right click menu in the Digitizer Tool e Added new option to the distance bearing COGO input to close a path using the compass rule and to edit the start location e Added ability to right click on a point in the Search by Attributes dialog and start a new distance bearing COGO line from that point e Added new batch conversion option to Make a Single Color Transparent This will allow you to choose a color to make transparent when batch converting raster format files e Added support for loading PDS Vicar format data which is commonly used by NASA for planetary data sets e Added new item to the right click menu in the Digitizer Tool when area features are selected to populate the attributes of those areas from the attribute tables of a single point contained within those area features e Added new Advanced Creation Options sub menu to the right click menu in the Digitizer Tool when area and or line features are selected This menu now contains the options to create lines from area create areas from lines create terrain from areas as well as a couple of new options see below Added option to the Advanced Creation Options menu of the Digitizer Tool to create new point features at the centroid of selected area featu
44. for waypoints if the lt sym gt tag matches a point symbol name in Global Mapper If not the lt sym gt tag value is saved as an attribute and will be kept on export to a new GPX file o Fixed export of labels with the background marked as filled rather than transparent to PDF files Now if not rotated the background will be blanked out in the PDF as well o Added new option on OSM TMS Google Maps Bing Maps export dialog to only export tiles that are fully covered by the export bounds This advanced option makes it easier to update just part of an earlier large web tile export o Automatically decode datums from GeogCitationKey in GeoTIFF files if provided there but not in datum code o Fixed error loading some HTF format files o Fixed bug in export of area Shapefiles that could cause some islands holes to turn into parents in the exported file o Fixed problems with some area features not loading from DGN files if they are incorrectly marked as holes o Fixed errors loading some workspace files over 2GB in size o Fixed export to 3D vector files pulling elevations from Erdas IMG files with overviews or online layers to pull from an appropriate layer automatically most detailed for IMG files rather than pulling from current drawn layer Renamed Gridding tab to Tiling to make the intent clearer especially when used in conjunction with other operations that refer to grids When cropping loaded layers to multiple
45. grid of features This new option on the Create Regular Grid dialog allows you to get a point feature named for the grid cell it anchors created automatically at each grid cell intersection Added option to create ellipses with a defined major and minor axis length and O rotation with the Create Range Ring option Added option to select all point Lidar features within some distance of selected line features The option is under the Advanced Selection right click submenu when you have one or more line features selected Added option when applying elevations to selected vector features from loaded terrain layers to add the terrain elevations to any existing elevations i e make the elevations relative rather than just overwriting any existing elevation values with the terrain elevations Added option to copy attributes from point to lines features with the Copy Attributes option in the Digitizer Tool Added option when copying attributes between feature types to handle when more than one from feature is in or near the to feature Updated the option to show a path profile for a selected line feature to allow showing the path profile dialog for up to 8 selected lines at once Each selected line will get its own dialog GEM Module Only Added a new checkbox option to the Create Flattened Site Pad Plan dialog to specify that the new flattened terrain should be inside the selected area s rather than outside This means that the new
46. image like NLCD data Updated watershed analysis to allow finding the drainage areas that drain to a selected point as well as to trace the flow leaving selected points Made custom symbols be embedded within Global Mapper Package GMP files so those symbols can automatically be used on other installations without having to first install those symbols This makes GMP files even more self contained for transporting data Added support for automatically adding custom symbols referenced in KML KMZ files Added support for using overview layers from Erdas Imagine img files when rendering greatly speeding rendering of very large img files with overview layers Updated creation of area features from lines with the Digitizer Tool to provide options for the combination including requiring closed areas to be created and also only connecting lines that match attribute wise against the other lines Also added progress reporting for the operation Added new line drawing styles for a dashed line with arrows pointing to either or both ends Added support for batch converting to mulit band BIL BIP BSQ and JPEG2000 formats Added option to locate the minimum and maximum elevation values in selected layers via a new right click option in the Control Center Added new option to Measure Tool to display measurement paths and measure distances bearings using rhumb lines in addition to great circle or grid lines Updated JPEG in TIFF export to use YCbCr c
47. in the Digitizer Edit tool o Added new right click menu option in the Digitizer Tool to allow easily shifting offsetting selecting features by some distance o Added ability to combine multiple attribute values into the display label for features on the vector layer options dialog available from the Overlay Control Center o Added new external control interface to allow external applications to control the view of Global Mapper and also display point features on the map loaded in Global Mapper See the Developers page at http www globalmapper com for details o Added option to the path profile line of sight dialog to allow matching the elevation scale to the distance scale o Added support for selecting multiple colors as transparent for palette based raster files o Added new Palette tab to Options dialog for raster layers with palettes to allow easy display and modification of the palette used for loaded raster layers o Added support for loading PCI Geomatics RAW files with AUX headers o Added support for loading German Topo map files in MPR MPH format O Added support for loading block polygon ASCII data files from the Minerals Management Service department of the US Department of Interior DOI Added support for loading TMC Location Database files from point dat and poffset dat files Added support for loading Lowrance USR v3 files with depth data Added support for automatic detection and loading of PLS CADD XYZ files Ma
48. installation folder Added recognition of additional EPSG codes for projections like MGI Balkans Updated EPSG projection definitions for State Plane Ilinois zones FIPS 1201 and 1202 New codes 3435 and 3436 are for these zones using feet units and existing codes 26971 and 26972 now use meters as units Added support for two extra false easting northing attributes to the State Plane projection system to support users that use a State Plane projection system with an extra scale factor such as for ground vs grid coordinates and then apply an XY offset to the coordinates after that Added zones 6 9 for Gauss Krueger Germany 3 degree zones projection Added additional S 42 Pulkovo 1942 datum specializations and made the base S 42 Pulkovo 1942 datum automatically select an appropriate specialization to use e Added support for easy creation of multi line text for area and point features by adding the text n to display labels for points when creating editing them with the Digitizer Tool Allowed the label for area features to be rotated Automatically combine address ranges for Tiger 2007 line segments that have multiple address ranges to make address searching more effective Added support for additional MTFCC feature type codes from Tiger 2007 data so that features like state and county boundaries can be automatically classified on import Added new selection mode to the Digitizer Tool If you hold down the I key when dragging
49. joining them into one long line Any points further apart than the specified maximum distance will be connected as part of a new line Added option to drag the map to scale features on the rotate scale features dialog Also added new options to the Move Reshape right click menu and Favorites toolbar to select drag to rotate and drag to so you can quickly get into drag rotate scale mode Added option to create a separate coverage area concave hull for each selected area line feature This is useful is you have a collection of irregular area features like automatically generated building outlines and you want to create a more smoothed boundary for each Updated creation of lines connecting points to nearest line to also add an attribute both to the point and the connecting line with the distance along the line to the nearest point This is useful for finding chainage and offset Updated selection of features with selected areas to also operate within selected closed line features This means that you no longer have to convert closed lines to areas to be able to select features within them When you have multiple picture points selected the option to place the picture points now allows you to draw a box in which to tile the pictures They will then automatically tile inside that box based on the size of the highest aspect selected associated image Fixed subtracting adding islands of areas that have vertices on the edge of the parent area
50. keyboard access to GPS menu items Save Tracklog Alt G then S and Mark Waypoint from Average Position Alt G then A Updated SPS format load to auto detect the format version if no header was provided so that the attributes can be decoded properly from SPS v2 x files Corrected cell type written to ERS files exported along with floating point BIL elevation files Updated raster KML KMZ export so that if you have the box checked on the Gridding tab to create separate folders for each row that your KML KMZ super overlay export will create separate folders for the zoom levels and rows of tiles to avoid sticking huge numbers of files in a single folder for very large exports Added Ctrl Shift S as shortcut for Save Workspace As Corrected reporting of minimum clearance location for line of sight and also storage of line of sight to a KML file to save the great circle path it was calculated with rather than the straight line path These can be significantly different for very long line of sight paths Added metadata about layers that were combined and the combine operation used to new elevation layers formed by combining terrain layers You can see these values on the Metadata dialog for the combined layer Improved handling of loading multiple unknown file types at once by remembering the type selected if prompted Also made MSI Planet files load regardless of filename Allow exporting grid lines to a raster file even if nothing else is loaded Made
51. layer that each feature is in Added upper case short descriptions of some commonly used items on the right click menu for the Digitizer Tool Updated creation of equal value areas to allow color fuzziness up to 256 to allow easily getting a polygon for the valid area of the layer Added Ctrl Alt M as shortcut for Measure Volume functionality in Measure Tool and Digitizer Tool Added new Advanced Selection option to the right click menu in the Digitizer Tool to allow easily selecting any area features that are connected to the selected areas Added new Advanced Selection option to the right click menu in the Digitizer Tool to allow easily selecting any line features that are connected to the selected areas Fixed problem loading NTF files in v12 02 Added support for adding a suffix to the row and column names when creating a regular grid of area or line features with the Digitizer Tool Updated KML KMZ raster exports to allow specification of JPG quality value Added 2 new filtering modes for the Combine Terrain operation You can now choose to keep the value from the first elevation layer if the second layer value is greater than or less than some other user specified value Allow specifying a suffix for the label for points generated from selected area or line features in addition to a prefix which you could already specify Added option to generate AutoKA PC World Files when batch converting to image formats Added option to use th
52. location being converted o Added support for the Miller Oblated Stereographic projection o Allowed use of the NZGD2000 datum with the New Zealand Map Grid projection o Made additional datum codes like those for the NTF datums be recognized for GeoTIFF files o Made ETRS89 datum be recognized in additional spellings from PRJ files o Corrected small error when transforming the Rome 1940 datum to other datums o Added Clarke 1880 Benoit as an available ellipsoid for adding custom datums View Shed Changes o Added option to the view shed tool to find a view shed of just where a beam will hit the terrain A start and end transmission angle are specified in addition to the transmitter height in order to find the beam intersection points o Added option to the view shed tool to specify a minimum distance from the transmitter to perform the view shed analysis Improved loading of DXF files that have features in the BLOCKS section of the file Prompt users to unload all loaded data when loading workspace files rather than automatically unloading all loaded data Added option to batch geocode addresses from a file from the Search gt Find Address menu command Added support for gridding the export of Simple ASCII Text VRML and Zmap Plus Grid files Added support for reversing the order in which rows and columns are named when gridding files on export Made the path profile line of sight dialog maintain its size between showings preventi
53. long lines Fixed problem with areas that the path profile crosses not being displayed if there are no line features loaded e Analysis Function Changes Q O O Added support for conditional expressions in the Raster Calculator This allows things like performing different operations on band elevation values depending on how they relate to other values For example you could have a formula like IF B1 gt B2 B1 B2 0 This would cause the resulting value to be B1 B2 if B1 gt B2 and 0 otherwise Improved creation of watershed water rise and view shed coverage areas to more rarely create self intersecting invalid areas Updated creation of view shed coverage areas with a transmission angle to create O a 3D area with the height of each vertex being the height of the transmission at the vertex distance This allows for a nice 3D display of the transmission beam Made volume calculations accurate regardless of what projection you are currently using for display Previously the volume could be inaccurate if using a distorted projection for the location like Geographic far from the equator Improved pile volume calculation by sampling the terrain at more locations around the pile area boundary to form the base surface rather than only sampling at the vertex locations This helps a lot for pile boundaries with only a few vertices and also lowers the effect a single poorly placed vertex can have Improved pile volum
54. matches against their attributes label values and or types Added GENERATE_WATERSHED script command to allow performing watershed analysis from a script Added new RUN_COMMAND script command to allow running any application from within a Global Mapper script Added new COMPRESSION parameter to EXPORT_RASTER command to allow specifying the compression to use when exporting GeoTIFF files This deprecates the USE_LZW parameter Added support for new PARENT_DIR wildcard in DIR_LOOP_START DIR_LOOP_END loop in script to allow using the name of the parent folder for the current file Fixed EXPORT_VECTOR script command when splitting against anything other than an actual attribute Added option to KML export using EXPORT_VECTOR command to specify which feature attribute to use for the folder name in the generated KML file The new KML_FOLDER_ATTR support specifying what attribute to use for the folder name Updated FILENAME_ATTR_LIST parameter for EXPORT_VECTOR command to allow specifying particular attribute values to filter against in addition to just splitting by attribute Updated GENERATE_CONTOURS command to support cropping contours to a polygon using the POLYGON_CROP_FILE or POLYGON_CROP_NAME parameters o Added support for exporting slope or slope direction values to new Float Grid format files using the EXPORT_ELEVATION command The new parameters are EXPORT_SLOPE and EXPORT_SLOPE_DIR o Made running scripts via the command line re
55. multi band exports with EXPORT_RASTER command Added time stamp to Script Processing COMPLETED message recorded when a script finishes so you can track the start and stop time of a script from a log file Added option to disable the write of projection information to ECW JPEG2000 files by adding NO_PROJ_HEADER YES to the EXPORT_RASTER command Added support for saving long labels over 31 characters to DXF files when exporting using EXPORT_VECTOR by adding ALLOW_LONG_LABELS YES to the command e Projection Datum Changes O O Added built in Qatar 1974 RT38 and RT38 Stockholm datums Updated great circle paths to be calculated along the geodesic for the ellipsoidal model defined by the current datum using the Vincenty formulas rather than using a spherical earth model This makes the great circle path more accurately the shortest path on the surface although for navigation purposes the differences are usually negligible Added NTv2 grid shift file for MGI Austria datum conversions to make them more accurate Added German Legal Metre as a built in unit Corrected European Datum 1979 to use International 1909 1924 ellipsoid it had been set to International 1967 Corrected Indian Nepal Kalianpur 1975 datum to use the new Everest 1830 1975 Adjustment ellipsoid rather than Everest 1856 Corrected Schwarzeck datum to use new Bessel Namibia GLM ellipsoid rather than the base Bessel 1841 Corrected Hong Kong 1963 datum to
56. needing a__MTL FST header file Fixed problem with line vertices showing up slightly offset from the line when zoomed way in on line features that are also being reprojected Improved display of 4 band Digital Globe QuickBird imagery with 8 bits per color band Removed special TIFF and GeoTIFF metadata pages and placed all of the information on the main metadata page so that the information could be easily copied to the clipboard Improved decoding of diacritic text from NIMA GNS point data files The UTF 8 encoded text is now converted to the current system codepage for improved display of diacritic and other extended characters Fixed very slow display of some large tiled TIFF files Dramatically sped up export of TerraServer USA data when it is being exported in a projection other than Geographic Added JPEG2000 jp2 BSB chart kap and Polish MP files to the list of Supported Commonly Used Types list on the file selection dialog e Added option to CSV export to include LATITUDE and LONGITUDE columns even if the projection is not Geographic e Drastically reduced memory requirements when exporting vector data to Global Mapper Package files and saving generated vector features like contour lines to workspace files This should eliminate all error messages when exporting package files and most when exporting workspace files e Added version to title bar e When exporting a VRML file made the lowest vertical exaggeration setting on
57. of clicked area and line segments With this mode selected clicking on a line or area segment brings up a dialog allowing you to edit the length of the segment and the feature is reshaped accordingly Added option to Digitizer Tool to copy selected attributes from selected areas to any areas contained partially or fully within selected areas Useful for applying things like land use attributes to smaller areas Made attribute editing remember any attribute names and associated values that have previously been entered and provide a drop down list of those values for easy selection Added new buttons to the Digitizer Toolbar for setting the new vertex draw mode to right angle mode orthographic horizontal or perpendicular to screen mode and also to undo the last placed vertex Made snapping work when moving a single area or line feature if any of the selected vertices of the feature being moved or any of the vertices if no vertices are explicitly selected is close enough to snap to a vertex of another existing line or area feature When drawing new area or line features with both the right angle to last segment and orthographic draw modes enabled the vertex will also snap to align to the first placed vertex of the feature to make it easy to draw things with straight edges like buildings Automatically enter Move Mode when pasting new features for easy moving of the newly pasted features When moving features stay in Move Mode rather tha
58. of them Added option when creating range rings with the Digitizer Tool to create a multi ring by combining the outer rings of multiple range rings into a single combined boundary When adding range rings and point features are selected added option to add the new range rings at the selected point locations Changed behavior of moving features and vertices with the Digitizer Tool so that the move operation is terminated once the feature s vertices are moved This is to prevent inadvertently moving the features again Fixed problems in Digitizer Tool with horizontal and vertical snapping not working properly for the last vertex added to line and area features Changed point in polygon selection hot key from ALT to the P key Now if you hold down the P key when left clicking to select with the Digitizer Tool the top most area feature containing the clicked location will be selected Made holding down the ALT key when selecting features and or vertices automatically put you in Move mode after the selection thus providing a quick way to manually reshape or move features e Polish MP cCGPSMapper Support Changes O O Added option to the Polish MP export to allow the use of a template MP file for getting the map settings to save in the newly created MP file Made addressing and routing attributes for line features be written to Polish MP files on export if they exist in the data being exported Made all point fea
59. on the layer in the Control Center and select the new JOIN TABLE option o Added support for calculating copying new attribute values made by copying an existing attribute or performing mathematical operations either between two O attribute values or an attribute value and some number To do this right click on the layer in the Control Center and select the new CALC ATTR option Added built in access to premium streaming high resolution terrain and imagery from Intermap using the File gt Download Online Imagery Data menu command Added option under View menu to zoom to the same location in Google Earth Added option to transform layer coordinates either by a manually specified coordinate transformation or with a control point file when shifting coordinates for selected layers from the Control Center in addition to just shifting a fixed distance Added option to crop area features to line features using the Digitizer Tool Added option to easily draw rotated area and line rectangles using the Digitizer Tool through the 3 point draw method Added new Image Swipe Tool to allow easily swiping away a raster layer to see other layers in an interactive manner Added option to create line features rather than areas when creating a regular grid of features using the Digitizer Tool Added option to create point features at the cell edges when creating a regular grid of features using the Digitizer Tool This can be handy for creating a custom grid la
60. other vertical display settings be written to the workspace so that the view will be the same when the data is reloaded Added new advanced options list to the General tab of the Configuration dialog to allow selecting advanced options like treating DXF INSERT entities as points automatically adding custom types for DXF layers exporting old format PRJ files preferring world file coordinates over embedded coordinates for GeoTIFF files and prompting for whether or not 16 bit BIL data is imagery or elevation data Added SAVE_SCALE_AND_LEGEND parameter to the EXPORT_RASTER script command to allow saving the distance scale and or elevation legend to generated raster format files Added POINT_SPACING parameter to the GENERATE_PATH_PROFILE script command to allow specifying the spacing between sample locations along a path profile rather than the number of points Fixed reading of Shapefiles with PolygonZ and PolygonM shape types which don t have Z or M values for all features Allowed specification of the default elevation units to use for vector data with elevations from the Options button of the Overlay Control Center This elevation units value will be used for any elevation values associated with vector features in that layer that do not explicitly contain a unit identifier i e ft or m When saving updating feature measure information for polygon features that have islands holes include the area of the island features as a separate
61. particularly when importing lines or areas with a lot of vertices Drastically improved speed when displaying some NAIP 2008 JPEG2000 imagery Added support for using TFWX files as world files for TIFF files Added display of the number of grid cells being exported when doing a gridded raster or elevation export Added display of the area covered by the screen to the View gt Properties dialog Fixed crash when doing more than one export to a web based format like Virtual Earth Google Maps etc from a single Global Mapper session Fixed HTML file created for Virtual Earth export when using the JPG format Added option to Download Online Imagery menu command to delete the caches for the various sources Added Alt R as a shortcut key to save the current view Improved decoding of block labels and attributes from some DXF files Added support for 2 additional resolution level exports for Google Maps exports allowing up to 2 cm resolution imagery to be accurately represented Allowed for the specification of negative grid cell width and or height values when exporting and using the Gridding tab When a negative value is specified the grid cells will be snapped to the right and or bottom of the export bounds rather than the left and or top as is normal When assigning areas to be islands in other areas with the Digitizer Tool allow the user to add areas as islands even if they are not completely contained within the topmost area at the click
62. pixel size etc Increased precision of lat lon coordinates displayed on the status bar Improved automatic detection of alpha channels and non standard color channels when loading ECW and JPEG2000 JP2 format files Changed font used for elevation legend and distance scale display text so that it can display correctly on all systems regardless of language Fixed problems loading 24 bit RGB MPR MPH files Fixed error when trying to load DBF files greater than 2GB in size Made gridded elevation grid generation from loaded vector data automatically overlap the edges during generation to generate a smooth non overlapped output Fixed problem when gridding elevation grid generation and manually specifying the sample spacing to use Fixed problem loading SID files with corrupt world files accompanying them Fixed problem with features being exported to the non populated upper layer s of MP files in some cases Made files loaded at a fixed screen position be maintained as fixed screen location files when saved to Global Mapper Package GMP files When loading generic ASCII text CSV files keep a name label column as both an attribute value and the display label if multiple attributes exist to allow easily changing what attribute s to display as the label When exporting to the Arc Ungenerate formats write out coordinates in the projection selected on the Projection tab of the Configuration dialog rather than just lat lon values Added auto
63. present at that location Added new built in Course Line line type to control how GPS course lines are displayed if that option is enabled Added support for exporting BSB maps natively with the Transverse Mercator projection Added option to allow long labels when batch converting to DXF files Fixed crash showing path profile line of sight details when a Fresnel zone frequency is applied Made Lidar LAS files correctly write v1 2 in the header if color values are present rather than v1 1 Fixed problems finding geospatial information from some Erdas img files Updated LAS export with color values stored for each point to store colors in upper 8 bits of color values rather than lower 8 bits as some applications expect them that way Updated LAS export with color values from LAS point clouds that had the color data to allow transferring that color data over to the new file Added option when creating equal value areas from palette based raster layers to specify whether to always save the palette index name or the full RGB value Fixed problems doing hyper spectral multi band exports with more than 16 bands or so Made option to snap to nearest input layer pixel on export work for gridded elevation exports in addition to raster exports Made very small i e less than 1 0E 6 elevation scale factors store properly in workspace files Fixed problems loading some slightly corrupt zip files Don t add extra space above or below path prof
64. rather than a standard deviation stretch The option is in the Advanced Section of the General tab of the Configuration dialog Added new option to disable auto contrast adjustment on load for high bit depth imagery The option is in the Advanced Section of the General tab of the Configuration dialog Added new option to create a map catalog from selected layers on the right click menu of the Control Center Added new option to combine terrain layers using a divide operation Added support for loading Global Mapper Grid GMG files larger than 4GB in size Added support for rotated ENVI files and raster imagery with ENVI headers including massively multi spectral ENVI files Added START_TIME and END_TIME attributes to tracklogs with timestamps imported from GPX files Added option to include MAP_NAME attribute when exporting Shapefiles The attribute will contain the description of the map that the feature originally came from Added support for loading very large zip files Zip64 format over 2GB in size Added option when loading very large OpenStreetMap OSM XML files to only load those features that intersect the current screen view Added support for generating MCF uBlox position files when exporting to most raster imagery formats i e PNG JPG etc Updated GeoTIFF export to allow using Deflate ZIP compression as well as specifying the quality to use for JPEG in TIFF compressed files Added new option when capturing the screen
65. rather than kept unmodified Allow reversing the vertices for a single selected area previously only worked for lines or if multiple areas were selected Fixed problem with every 32 vertex not showing vertex editing commands in right click menu e Scripting Changes O Added support for passing variables on the command line to a script You can provide the variable after the script gms filename itself on the command line in the form var_name var_value For example global_mapper exe c my_path my_ script gms my var my_var_ value LIDAR MODULE ONLY Added support for saving Lidar statistics from a script If you add ADD_LIDAR_STATS YES to an EXPORT_METADATA script command you get all of the information from the Statistics tab of the Metadata dialog dumped to the file Added new DEFINE_VAR_TABLE command to allow providing a table of variable values with key names to allow easily creating generic scripts with tables of things like state names and abbreviations associated with a numeric code etc Added support for creating buffers around features using the EDIT_VECTOR command There are new BUFFER_DIST and other attributes see the scripting reference for details Updated behavior of VAR_LOOP_START so that if you provide an end value less than the start and explicitly provide a positive VAR_STEP the loop is just skipped rather than the step direction being automatically reversed This allows you to use the VAR LOOP
66. release Added support for reading coordinates from world files where the coordinates are separated with tabs rather than being on separate lines Made the list of layers in the Overlay Control Center be scrollable with the mouse wheel Corrected image registration via CompeGPS IMP files with control points in multiple UTM zones or in a UTM zone in the Southern hemisphere Improved decoding of CompeGPS IMP files using Lambert Conformal Conic projections Sped up the import of large DTED files Made symbol and type lookups by name work properly for types and symbols with accented characters Don t allow multiple custom shaders with the same name to be used Fixed loading of Arc ASCII Grid files with lines over 256 KB in length up to a max of 2MB per line Fixed bug with display of raster layers texture mapped over loaded elevation layers that do not use the shared default shader Fixed bug in the encoding of area features in DLG O files and allowed correct reading of incorrectly encoded DLG O files with area features Fixed display of tiled 16 bit grayscale TIFF imagery Fixed recording of GPS tracklog when attached GPS device always reports an elevation of 0 Fixed auto contrast adjustment for some large images with 16 bits per color channel Made rotation values from BLW files used to position BIL files be used Added option to Vector Display tab of the Configuration dialog to allow hiding any extra text displayed below road icons l
67. roughness Currently the CORINE land cover and MODIS VCE are supported as input data types Added support for defining feature labels based on a custom free form string that can include multiple attribute values Added support for defining feature labels based on a custom free form string that can include multiple attribute values Made feature labels that are based on attribute values automatically update when those attribute values change Added option to allow cropping any loaded features to one or more selected area features to the right click menu of the Digitizer Edit Added display of the length of each segment when displaying the vertex list for a feature with the Feature Info or Digitizer Edit tool and also allow for editing the length Also make the selected segment be highlighted on screen Added option to Digitizer Tool to allow editing the length of clicked area and line segments With this mode selected clicking on a line or area segment brings up a dialog allowing you to edit the length of the segment and the feature is reshaped accordingly Added option to Vector Display tab of the Configuration dialog to allow displaying the length of line segments on the map Made attribute editing remember any attribute names and associated values that have previously been entered and provide a drop down list of those values for easy selection Added support for custom slope shaders There is now a checkbox option on the custom shader dialo
68. so you don t get an island added that touches the parent instead an actual subtract operation that removes the polygon from the parent shape Added option to snap to the nearest raster layer pixel center when digitizing This new snapping option can be enabled under the right click Options menu When enabled digitized points will snap to the center of raster image layer pixels if nothing else is available to snap to and the click location is inside a raster layer When creating editing individual features make the layer selection box include the group name for the layer the feature is in if it is grouped Also prepend an asterisk to any layer names that are hidden or non selectable so they are sorted together Added option when moving lines to the nearest point to also insert vertices in the line at the point locations Updated option to select all lines within selected area features to also select any vertices within that area if vertices are displayed for selected features Added new option to select any line features that are outside of selected area features and leave any inside the area de selected When creating a regular grid of features allow using special values left top Zright and bottom for the numeric start value for the rows and columns Those special values will be replaced with the corresponding edge of the grid cell bounding box This allows you to easily get grid cell coordinates as the names of the grid cells Add
69. some line features at some zoom levels Added option to generate a PRJ file when exporting vector data to Simple ASCII Text files Made information about the feature location under the cursor be displayed in the status bar regardless of what the active tool is For tools like the Digitizer Edit tool the feature information will be displayed after any instructions Made the Feature Type value for selected features be displayed in the Feature Info dialog The Description value will only be displayed if it is different from the Feature Type value In the vector Search dialog replaced the lt Feature Description gt searchable field with the more useful lt Feature Type gt field that always reflects the type of the feature Fixed error introduced in v8 01 when exporting grayscale MrSID imagery to new files When exporting to a Float Grid file write a cellsize value to the hdr file rather than xdim and ydim values if the X and Y sample spacing are equal This should fix errors loading creating Float Grid files into Arc Info Added support for loading Erdas Imagine img files directly from archives zip tar gz etc files Made additional SEGP1 format layouts be supported Added an option to map catalogs to control whether or not the map bounding boxes are displayed when a map itself is not displayed Added option to the Path Profile Line of Sight dialog File menu to save the path profile to a BMP file and display it in a fix
70. some minimum length threshold in meters This makes it easy to discard any very short little contours that commonly crop up in very detailed data sets like those derived from Lidar Added Resampling method selector on the Generate Contours dialog for selecting which resampling method to use when sampling terrain layers during contour generation Fixed problem with the Pile Volume calculations results not being consistent with the results if you add elevations from the terrain to the area vertices then calculate against that Fixed problem with high bit depth images created with the Raster Calculator not displaying properly if the calculated values are larger than 255 Fixed problem with tiny unconnected line segments sometimes being created as part of contour generation Fixed path profile when sampled at a fixed distance interval to not include the non endpoint vertices that aren t at an exact distance multiple Fixed problem with inconsistent path profile line of sight results depending on your zoom level when creating the path profile Fixed crash when doing a path profile where no elevations are available on the path e Digitizer Tool Changes O O Added polygon selection mode in the Digitizer Tool You can enable this under the Advanced Selection submenu then you can draw a polygon by left clicking to define a region to select features in Added option to create point features at grid line intersections when creating a regular
71. space is just inserted before those characters to get rid of the errors Added support for a LABEL_ON_LINE parameter in ASCII text files for specifying that labels for a line feature should be centered on the line WHAT S NEW IN Global Mapper v7 02 Added option on Vector Display tab of the Configuration dialog to allow more control over the order that vector features are drawn in You can now select to have the layer order in the Overlay Control Center take top priority for vector data allowing vector layers to be drawn under raster layers and also allowing explicit forcing of vector layer draw order Added support for searching on address in the US under the Search menu Added option to download TerraServer data near an address Made transparency and translucency in PNG files be used Added support for creating transparent PNG files this is now the default Digitizer Tool Changes o Improved ease of digitizing lots of area line and point features by making the Digitizer Tool stay in the creation mode after creating a feature rather than forcing you to re select the feature type to create each time You still just need to right click to cancel the current operation o Added display of the number of points digitized so far when drawing a new line or area feature with the Digitizer Tool o Added option to reverse the order of the vertices in selected line features using the Digitizer Tool o Added option to find unconnected endpoints i
72. terrain will smoothly transition from the heights at the edge of the area to the terrain surface inside the area Updated the regular grid creation so you can now choose to either anchor it to the top left point like before or specify to fill a box If you choose to put the grid in a box you select the box you want and just the number of rows columns or the cell width height then the other value is calculated from the box Added option when creating coverage polygons for features and layers to control how smooth the resulting polygon is relative to the data Added options when creating points from area centroids to control whether or not the points are moved inside the areas if the centroid is outside the area the default and also whether only a single centroid per group is created if you have grouped areas When creating points at line intersections include the attributes of the intersecting lines as attributes of the new intersection points The attribute names will be prefixed with LINE1 or LINE2 depending on which line they came from When creating points at the centroids of selected area features make sure the point doesn t end up inside an island of the area When you move a vertex of a 3D line to a location that snaps to a 3D feature the Z value of the vertex is now updated to the Z value of the snapped location Made creating multiple new area features from lines in separate operations default the layer to the last selecte
73. that partially overlap and whose centroid is within a selected area Updated the feature measure dialog to highlight the feature selected in the dialog on the map Add a TIMESTAMP as well as ELEVATION and DEPTH if applicable attributes by default to points created with the Quick Point Creator feature from the position of a connected GPS device Fixed change in orientation of line and area features when editing the segment lengths when the bearings are being reported relative to magnetic north e Scripting Changes O Added support for numeric and character looping in scripts using new VAR_LOOP_START and VAR_LOOP_END commands This allows you to step through some range of numbers or characters in a script including simple loop counters or numbers like coordinates Added support for looping over loaded layers in scripts using new LAYER_LOOP_START and LAYER_LOOP_END commands This allows you to step through any loaded layers to perform operations based on some current layer Added new CALC_ATTR script command to allow calculating new or updating existing attribute values in a script including numeric calculations between an attribute an another attribute or a fixed value and appending or prepending text to existing attributes Added new EDIT_MAP_CATALOG script command to allow creating new map catalogs and adding and removing maps from existing map catalogs from inside a script Added new SET_LAYER_OPTIONS script command to allow setting
74. the display options of a loaded layer without having to unload the layer and re import it Added new COPY_LAYER_FILES script command to allow copying the base files for one or more loaded layers to a new location on disk new in v14 0 1 release Allow use of the SHAPE_TYPE parameter to filter which types of objects i e areas lines and or points are considered for the EXPORT_VECTOR and EDIT_VECTOR commands Added support for TRANSFORM_FILENAME parameter for IMPORT command in script to provide a coordinate to coordinate rather than pixel to coordinate like the GCP_FILENAME parameter when loading a layer Added support for generating OziExplorer map files for EXPORT_RASTER command Use GEN_OZI_MAP_FILE YES to enable this behavior new in v14 0 1 Added support for specifying the SPATIAL_RES parameter for export commands as percent values rather than raw numbers to easily allow adjusting native resolutions Fixed issue with folders being created for each possible output when gridding even if no files end up being created there Added option to mark duplicate features with a DUPLICATE Y attribute by adding MARK_DUPLICATES YES to the EDIT_VECTOR command rather than just marking them as deleted You can specify IGNORE_ATTRS YES to only match on geometry and not also attributes but now specify DUPLICATE_ATTR parameters to indicate some attributes that do need to be identical Allowed use of POLYGON_CROP_FOLDER_ATTR without also using P
75. the island features as a separate item in the Geometry section of the Feature Info dialog Also subtract the area of those islands away from the total polygon area to give a true representation of the actual area covered by the polygon Improved compression of 24 bit RGB GeoTIFF files created by Global Mapper that are created with the LZW compression option Improved consistency of multiple view sheds calculated from the same center point with the same sample spacing but different radii when the specified sample spacing is much larger than the spacing of the elevation files that are used Sped up calculation of view sheds when the elevation data being used comes from a map catalog or Global Mapper Grid files Sped up contour generation when the elevation data being used comes from a map catalog or Global Mapper Grid files Added support for specifying a scale factor for Lambert Conformal Conic and Stereographic projections Significantly sped up export to any raster format using a palette such as palette based GeoTIFF or PNG exports Added option to do case sensitive searches with the Search gt Search by Attributes menu command Made map catalogs be exportable to Global Mapper Package files Fixed orientation of GPS heading arrow when the display projection is one in which north is not necessarily straight up e Reduced memory usage for E00 files with lots of attribute values e Fixed calculation of PERIMETER and ENCLOSED_AREA values for s
76. the slider correspond to no vertical exaggeration at all e Fixed bounds of exported VRML files so that they will tile properly In addition additional comments were added VRML file headers to describe the ground location of the data and additional digits of elevation precision were also written out in most cases e When using the Add Loaded Files or Add Onscreen Files batch conversion dialog buttons allow the user to add files of types other than the specified input file type e Allowed for entry of azimuth and altitude light angle values at greater than integer precision on the Vertical Options tab of the Configuration dialog e Moved the Configuration button on the toolbar to be next to the Overlay Control Center button as that is a more logical grouping e Changed the globe button on the toolbar to launch the online TerraServer USA WMS data access dialog rather than going to the Find Data Online page at lt http www globalmapper com gt e When marking a waypoint from a tracked GPS location automatically add elevation if available and timestamp attributes e Fixed error message and lockup on Search gt Search by Name dialog when searching on the last start letter like Z and having non alphanumeric characters starting some of the strings e Made State Plane projections be recognized from ECW files rather than using the base projection like Lambert Conformal Conic e Updated Surfer BLN export to use new comma delim
77. to allow scripts to just create the metadata files like world files and TAB files when exporting GeoTIFF JPG and PNG files rather than doing a full export Made workspace files support relative filenames allowing data referenced by workspace files to be moved so long as the workspace file is moved as well Added option to Terragen ter file export to allow the creating of non square terrain files This files should work with Terragen 0 9 x and later Added option to create area features from the bounds of the selected layer in the Overlay Control Center by selecting and then right clicking on the layers that you want to create the bounds from Added support for loading data in the GPS TrackMaker gtm format Added support for the Bonne and Cassini Soldner projections Added support for non zero central meridians when using the Gall Stereographic projection Added support for the Hartbeesthoek94 datum Added support for loading DTED files that have HDR and or VOL records at the beginning Added support for loading ASTER HDF files with hdf0 and hdf1 extensions as well as additional variations of ASTER SWIR data Fixed export of high color 24 bit and above and 8 bit grayscale TIFF files to image optimized palette based TIFF and PNG formats when the TIFF file incorrectly specifies that it is grayscale and not RGB Sped up display of TerraServer data that crosses UTM zone boundaries Added support for finding world files with a wld ex
78. to the filename Improved loading of ATTRIB values from DXF values Improved export of point text features to DXF files Fixed loading of 3D LINE entities from DXF files where the start and end points had different elevations Made 3DFACE entities be loaded from DXF files Added option to use the display label as the layer name when exporting to DXF files rather than the description type if a layer name is available for a feature Allowed Crop to Selected Area Feature option to be used when generating contours Added option when generating contours to control whether or not unit indicator suffixes should be appended to labels for the generated contour features Added INC_UNIT_SUFFIX parameter to the GENERATE_CONTOURS script command to allow specification of whether unit indicator suffixes should be appended to the labels for the generated contour features Added Sphere Radius 6371204 m as an available ellipsoid for adding custom datums Fixed problem with custom datums created by the user being written out to new files like GeoTIFFs as the Adindan datum Fixed incorrect loading of some MSI Planet format height files they would appear garbled Fixed errors loading some GPX files with extremely long text strings in them Fixed problem with missing lat lon grid lines in some projections where the lat lon grid is not valid over the entire data bounding box Fixed automatic removal of collars for files with very curved lat lon boundarie
79. value indicating a separator character If the split attribute has multiple values like PROPERTY_NAME A B C with SPLIT_ATTR_SEP COMMA you wouldget 3 copies of the feature one in layer A another in layer B and another in layer C Added support to specify the type for an EXPORT script command as FIRST_LOADED or LAST_LOADED to export the same type as an already loaded layer Updated SET_OVERLAY_OPTIONS script command to only update any options that are actually provided for the layer rather than resetting many like GROUP_NAME to the default if not provided Allow specifying multiple FLOW_TO_POS parameters to a GENERATE_WATERSHED script command so you can analyze the flow to multiple points at once Added option to create point features from each vertex of matching area and line features by adding CREATE_VERTEX_POINTS YES to an EDIT_VECTOR script command Added support for specifying the Lidar class filter using the LIDAR_TYPE_FILTER command with the LIDAR_FILTER parameter Added support for specifying a Lidar class filter with the LIDAR_FILTER parameter for IMPORT and IMPORT_ARCHIVE script commands Allow leaving off SHAPE_TYPE for EXPORT_VECTOR if only one type areas lines or points of features are loaded The SHAPE_TYPE will be auto selected in that case Added support for getting the folder string that the current file in a DIR_LOOP_START loop is relative to the original search folder This is inserted using RECURSE_FOLDER
80. 2 with pressing cancel on view shed options dialog causing the Control Center to stop updating properly Added option when creating roughness areas from a land cover layer to control whether or not invalid areas are automatically chopped up Fixed problem calculating roughness grids from land cover layers that have had color modifications like translucency contrast etc applied e Digitizer Tool Changes O Added option to automatically download and or load files web links associated with an attribute of selected features This is a very powerful feature allowing you to easily download files associated with features like coverage areas from online server or load from local disk This option is on the right click Attribute submenu when one or more features is selected Added option to add curve arc segments when creating distance bearing COGO lines The arc parameters like chord length radius and bearing are providing as part of the COGO string for a segment Added option to create numbered points along a distance bearing COGO line The points start at a specified number and increase by 1 for each vertex Added option to copy attributes from line features to area features Added option to create radial lines at some fixed angle interval when creating a range ring Updated option to crop selected areas to a selected line to allow cropping areas to multiple selected lines at once When creating new areas or lines by clicking on existin
81. 8192 to allow splitting into different size tiles if your hardware allows it like maybe a much larger size to avoid issues with labels disappearing when the export is split The new value is a DWORD value named BigExportTileSize that should be placed in HKEY CURRENT_USER Software Global Mapper e Added smarter parsing of attribute tables stored as HTML in balloon text and descriptions for KML KMZ files e Fix problems enabling map legends of vector feature types when map catalogs with vector data are loaded e Made shortcut keys work when the Control Center window has focus e Made cropping a loaded raster layer to an area feature with islands holes in it use the holes e Allow creating equal value areas for multiple selected raster or elevation layers at once from the Control Center e Prompt user about whether or not to keep join results when there are multiple join table records with the same value WHAT S NEW IN Global Mapper v13 00 e Significant New Features o Added support for loading ESRI File Geodatabase GDB data sets from ArcGIS v10 and later o Added support for generating density grids from point features in a loaded layer This density grid can be based on either just a count of the point features or any numeric attribute value associated with the points o Added support for joining a file with attributes to the attribute table of an existing loaded spatial layer against a common attribute To do this right click
82. Added option to automatically classify building and high vegetation i e tree points from a raw Lidar point cloud This is a very powerful option on the Lidar toolbar and via the LIDAR_CLASSIFY script command that combined with the existing and much improved option to automatically classify Lidar ground points allows automated classification of over 90 of ground building and high vegetation points from a raw Lidar point cloud LIDAR MODULE ONLY Added option to automatically extract building outlines from classified Lidar point clouds This is a very useful option on the Lidar toolbar that combined with the automatic classification and manual cleanup tools can allow very efficient extraction of 3D building outlines from Lidar point clouds This option is available on the Lidar toolbar and in a script via the LIDAR_EXTRACT command LIDAR MODULE ONLY Added option to automatically extract tree points areas from classified Lidar point clouds This is a very useful option on the Lidar toolbar that combined with the automatic classification and manual cleanup tools can allow very efficient extraction of tree points with crown height and width attributes as well as approximate tree coverage areas from Lidar point clouds This option is available on the Lidar toolbar and in a script via the LIDAR_EXTRACT command LIDAR MODULE ONLY Dramatically improved automatic classification of ground points The following improvements have been made
83. Added option to control whether or not unit labels e g m or ft are displayed on the elevation legend This setting can be changed by right clicking on it and selecting the appropriate option Fixed problem with grid line labels being cropped at the bottom when footer strings were used during printing Made new Explorer style dialogs be used for all file selection Fixed crash when displaying metadata for map catalogs that contain elevation layers Fixed errors loading some tiled TIFF files with separated color channels Made dot symbols look better when printed Made the filling in of small gaps work when exporting DEM files with arc degrees as the current view export units on the Projection tab of the Configuration dialog When creating area features from selected line features with the Digitizer Tool only prompt for name attribute and style information once then use that information for all remaining areas created from the selected lines if no other information is available from the lines making up the area Made the count of selected features appear in the status bar when the Digitizer Tool is active and you are not actively working with the selected features Corrected decoding of New Zealand Map Grid projections from ECW files They were being decoded as a closely approximated Transverse Mercator projection Fixed loading of some ASRP format data files Fixed errors loading DLG O files with area features and non contiguous
84. BF files o Added option to Shapefile export to control whether or not ELEVATION attributes are written out for features with a single elevation value o Added option to Shapefile export to control whether or not a comma can be used for a decimal when detecting the type of fields o Fixed problem with extra comma in the Projection Setup field for Ozi map files written out for some projections like Transverse Mercator o Added option to generate PRJ files when exporting to most terrain formats including Arc ASCII Grid and XYZ Grid o Allow loading files from tar gz archives that are larger than 2GB in size o Added support for Swedish RIK files with transparency and also made the SWEREF99 projection read correctly from newer RIK files o Fixed export of ECW file with New York East State Plane zone storing as New Jersey zone they are identical definitions so the coordinates are the same anyway o Updated Erdas Imagine IMG files to automatically obey any no data values specified in the header both for terrain grid and imagery files Fixed handling of attributes with double quotes from PLS CADD XYZ files Improved support for lt ExtendedData gt tags with attributes in KML KMZ files Fixed encoding of non ASCII folder names in KML KMZ files Fixed problem with the latitude of origin not writing out to MapInfo files for Hotine Oblique Mercator based projections like Swiss Grid o Updated GPX import to automatically assign the symbols
85. CIB tiles should be Updated CADRG exports to map type with Various for scale to save the actual scale entered in the exported files rather than just saving Various Improved handling of workspaces with very large embedded layers When loading multiple workspace gmw files at a time if you choose to skip unloading all layers for one workspace in the load operation the rest will automatically be skipped Added check for corrupted workspaces when saving a new workspace This offers some protection against bad disk sectors or incomplete writes over a network that can result in lost data Updated Zoomify format exports to keep empty tiles Added support for loading elevation values from attributes text files that use commas for a decimal separator rather than a period Fixed issues loading Erdas Imagine img files with signed 8 bit values Updated GeoTIFF export of Web Mercator projections to store an ESRI PE String in the PCS Citation so that Esri products can recognize the projection Corrected placement of GeoTIFF files with negative X or Y pixel scale factors Fixed issue from v14 0 with not being able to hide some NITF image layers Fixed problem with missing tiles when exporting CADRG files from some map catalogs Updated to support 64 bit feature Ds in OSM XML imports and exports Greatly sped up the display of some rotated BSB charts Updated SPS import to keep point depth and water depth as separate DEPTH_PNT and DEPTH_
86. D display to control the extrusion of 3D areas to the ground The altitudeMode attribute is used to specify whether elevations are relative to ground or absolute in the 3D view Added advanced option to KML KMZ raster export to use transparent PNG images for any exports with transparent pixels when the JPG format is chosen for the export This allows you to use the best compressed JPG images whenever possible and only switching to PNG for transparency when absolutely necessary Added option to KML KMZ vector export to quickly add available attribute values to the custom HTML description text Made area transparency and border line styles work for some KML KMZ files that they weren t used for before Fixed lockup loading some KML KMZ files that referenced custom icon images Allow cropping to a selected area when exporting a vector KML KMZ file Added support for rotated symbols in KML KMZ files Made the option to import DGN cells as points work for DGN v8 files Previously it only worked for DGN v7 files Added option to write out ECEF coordinates when exporting to CSV and Simple ASCII Text format Added option to specify Security Classification and added an advanced option to write out empty frame files for CADRG CIB export Added option to specify the maximum number of colors to use for a CADRG CIB export This allows you to reduce the number of significant colors considered to possibly enhance the presence of small features using colo
87. D area and line features This is typically used when you have features that have erroneous elevation lists of all 0 Fixed selection of lines that are completely within an area with lines that start on the area boundary and leave it but remain inside the bounding box of the area being selected Allow cancelling the process of selecting points that are within selected area bounds Fixed the resampling and or splitting of line features at a single fixed distance Fixed problems with many different buffer creation operations Sped up the creation of very small buffers by reducing the number of vertices used to trace the curve at the ends for buffers less than 10 meters in Added progress dialog that can be cancelled when creating buffer areas from features with lots of vertices Corrected the placement of points at the centroids of selected areas e Scripting Changes O O Added DEFINE_SHADER for adding custom shaders via a script Added support for OR searches rather than just AND when using the EDIT_VECTOR script command to perform operations on some features and multiple COMPARE_STR search parameters are provided Add COMPARE_OP ANY to use an OR search rather than AND Added support for EQUAL_COLORS parameter for GENERATE_EQUAL_VAL_AREAS script command to specify a specific list of colors to generate equal value areas for Added support for providing PRECISION attribute when exporting a SIMPLE_ASCII format with the EXPORT_VECTOR script
88. DD_MEASURE_ATTRS command to the scripting language to allow adding measure attributes to loaded vector layers from a script o Made the OVERWRITE_EXISTING NO parameter work properly when gridding an export from a script o Added new PIXEL_SIZE parameter for use with the EXPORT_RASTER script command This parameter allows you to specify the desired pixel size of your export result The format is PIXEL_SIZE lt width gt x lt height gt or PIXEL_SIZE 1024x768 as an example o Made the value of the INC_VECTOR_DATA parameter default to YES with the EXPORT_RASTER command if only vector data is loaded o Allowed use of SPATIAL_RES parameter with the IMPORT_ASCII script command to manually specify the grid resolution to use when generating a gridded elevation layer o Added new LAYER_BOUNDS_EXPAND parameter to script commands taking a bounding box so allow using an expanded version of a bounding box obtained using a LAYER_BOUNDS parameter o Added new DGN_GLOBAL_ORIGIN_LL DGN_REPLACE_DARK_ COLORS and DGN_UNIT_RESOLUTION parameters to the EXPORT_VECTOR script command to allow specifying additional options for DGN export o Made GEN_WORLD_FILE parameter work for ECW and JPEG2000 exports from script files o Added new PROJ_EPSG_CODE parameter to IMPORT commands to allow specifying the projection by EPSG code Allowed easy movement of view sheds by moving the transmitter point feature at the center of the view shed using the Digitizer Edit Tool Wh
89. ER script command of a script being run in the context of the main map view unload any user created features Added new parameter VECTOR_ONLY to the UNLOAD_ALL script command to allow easily unloading all of the vector layers but leaving the other layers loaded Fixed handling of export bounds and spacing when exporting DXF 3D Face DXF Mesh STL and VRML files with the EXPORT_ELEVATION command Added SMOOTH_CONTOURS parameter to the GENERATE_CONTOURS script command to allow the user to control whether or not generated contour lines are smoothed to improve their appearance Added REQUIRE_WORKSPACE parameter to the GLOBAL_MAPPER_SCRIPT command to allow specification that a script workspace file can only be run if another workspace file is already loaded Added ENABLE_PROGRESS parameter to the GLOBAL_MAPPER_SCRIPT command to allow specification that no progress reporting dialogs should be displayed while running a script Use ENABLE_PROGRESS NO to disable the display of progress e Projection Datum Changes O O O O O OOO Added the Cassini Malaysia state zones Hungarian National Grid EOV Lambert Cylindrical Equal Area RSO East Malaysia Borneo RSO West Malaysia Peninsular and Two Point Equidistant projections Added the ATS77 Nova Scotia Hungarian 1972 HD72 and Indian Nepal datums Added the ATS77 Everest 1830 1967 Definition and Everest 1956 ellipsoids Added support for supplying an extra scale factor to State Pl
90. F KML KMZ GML OSM XML and GPX will automatically set the proper code page for a layer when loaded Searching and editing of labels and attributes will use the current system language setting so you can for example edit Korean language attributes if your Windows language is set to Korean Exports to formats that support character set information like Shapefile DBF KML KMZ OSM XML and GPX will convert text from the original layer text language code page to the selected output language or the character set for that format Made toolbars remember their location between runs Finally you can re organize your toolbars and have their location be remembered when you close and re open Global Mapper Added support for specifying the altitude mode for vector features layers This allows specifying whether 3D vector features have heights relative to ground or absolute heights relative to sea level You can set the altitude mode individually for features when editing them or for an entire vector layer at a time on the Options dialog for the layer The altitude mode is used in the 3D viewer to place O O the features If unspecified the 3D View setting for relative absolute is used The altitude mode is set automatically when reading KML KMZ files The altitude mode is also used during view shed calculations with vector obstructions and when displaying a path profile for a 3D line feature Added conditional processing via new commands IF ELSE_IF EL
91. FF files to new TIFF or JPG files maintain the DPI value specified in the original file if there was one Made GPX exports write out lt time gt attributes for lt wpt gt elements if TIMESTAMP TIME or UTCDATE and UTCTIME attributes are available for the point being exported Made the preview window on the feature edit dialog for points and the create strike and dip dialog display the portion of the map under the point location so that you can see exactly how the symbol will look on the map when you create it Added new option specify that any raster layers should automatically have anti aliasing interpolate enabled when loaded to the Advanced section of the General tab of the Configuration dialog Added support for loading text associated with features from USGS DLG O files Added support for loading compressed GXF files Made FONT_HEIGHT_METERS attribute actually be used when importing point features Changed FONT_HEIGHT_METERS to FONT_HT_M when writing out style information via attributes so that it would fit inside the 10 character attribute length limit for DBF Shapefiles Added a new option to the Advanced section on the General tab of the Configuration dialog to specify that lat lon values in the status should be displayed in WGS84 rather than the current datum selected on the Projection tab of the Configuration dialog Sped up gridding of Lidar LAS files when using the option to remove ground shot points during the gridding oper
92. FL1 field O O O O Defer errors encountered while reading from MrSID files during export until the end of the export The problem areas will be filled with the background color or black Updated Garmin JNX export to include the Product ID everywhere it is needed in the output file so that BaseCamp can activate it properly Allow selecting a band marked as an alpha channel as a data band for MrSID and JPEG2000 images This allows doing multi spectral analysis on files that incorrectly mark a data band as an alpha channel Added option to control whether or not elevation attributes are included when batch converting to MapInfo MIF MID and TAB MAP files Added support for wildcard characters and in the PDF layer names in the LOAD_FLAGS of the IMPORT command Create BSB file alongside KAP when exporting to the BSB chart format In scripts you can disable this by adding CREATE_BSB_FILE NO to the EXPORT_RASTER command Fixed problems displaying some BSB charts Fixed loading of binary DXF files Fixed rendering of some SPLINE entities from DXF and OCAD files Advanced users can customize how many points are used to stroke a spline curve with a given number of control points by creating a DWORD value in the registry named SplineCurveMult at HKEY CURRENT _USER Software GlobalMapper with the number to multiply the control point count by to get the final vertex count The default value is 8 so a spline with 4 control po
93. G files Fixed issue rotating and scaling islands in areas if both the island and the parent area are selected Fixed flicker of map layout elements like scale bar and elevation legend when moving cursor around path profile Fixed export of borders for translucent areas to PDF files Made the margin color selection in the Map Layout dialog be remembered Updated the rotate scale dialog to remember the last manually entered position selected to rotate about during a single session Made holes islands in areas export properly to Lowrance LMC format files e Fixed issue with 2 rectification dialog appearing when rectifying an image with a map catalog of images loaded in the main map view e Added support for decoding gml Curve elements from GML files e Fixed export of elevation data sets with valid values below 9999 0 to Arc ASCII Grid files e Updated the palette dialog to allow editing the color or description for multiple entries at a time e Added support for pulling in files via FTP using the IMPORT command in scripts e Allow cancel when loading large PNG files e Added option to Google Maps and Bing Maps VirtualEarth exports to fill each exported tile to the full bounds rather than cropping to the specified export bounds e Fixed issue with changes to vertices made through the Vertices dialog off of the Feature Information dialog being lost if you switch tools or click to select a new feature in the Feature Info tool e Fixed
94. Import Formats o Added support for loading DGN v8 and later format files o Added support for loading MapTech format files including encrypted BSB files and other MapTech topo maps and aerial navigation maps o Added support for loading Idrisi format raster and elevation files e New Export Formats Added support for exporting loaded vector data to DGN format files Added support for exporting loaded data to Erdas Imagine IMG format files Added support for exporting loaded data Idrisi format files Added support for exporting 8 bit and RGB GeoTIFF files with LZW compression LZW compression typically results in much better compression that the default methods but may not be supported by all software applications e Drawing Changes o Significantly improved the display of raster and gridded elevation data at intermediate zoom levels by always anti aliasing the display when not zoomed into the pixel level of the data and not zoomed out so far that it doesn t matter much There will be a slight performance hit for this but the improvement in display quality seems worth it o Made pressing the ESC key during a draw abort the draw as soon as possible e Projection Datum Changes O O O 0 o Improved accuracy of the NAD27 Canada AGD66 AGD84 and NZGD49 datums by using the NT v2 grid shift method for sub meter datum transformation accuracy o Added generic NAD27 datum that will automatically use the most accurate local datum conversion based on the
95. OLYGON_CROP_NAME_ATTR to insert a folder into an output filename path Updated SET_LOG_FILE command to add a version string and timestamp to the log file Added new GRID_TYPE_PIXEL_SIZE_MAX parameter for EXPORT_RASTER and EXPORT_ELEVATION script commands to allow specifying that gridding should be done to a maximum pixel size but then the actual pixel size shrank to get same sized tiles that exactly cover the specified export bounds rather than making the last row and column of tiles possible go past the edge Added support for providing a coordinate offset and scale COORD_OFFSET and COORD_SCALE parameters when exporting Lidar LAS files with the EXPORT_VECTOR command Fixed issue with the EXPORT_RASTER command when running a script from a command prompt whereby if you only had vector data loaded it wouldn t be found Fixed COMBINE_TERRAIN script command to by one pixel larger in size to better maintain the sample spacing Fixed JOIN_LAYER command to work with formats other than Shapefiles Added option TIFF_NO_GTIFF_HEADER to disable writing out a GeoTIFF header when exporting a TIFF file Add option to prepend a blank line to the start of empty files being appended to with the GENERATE_PATH_PROFILE script command by adding an ADD_BLANK_LINE YES parameter Updated DIR_LOOP_START to allow specifying two dots as the FILENAME_MASK parameter for just looping over directories without needing to specify a file inside the folders e
96. PSG codes for Swedish Grid 3021 and 2400 Added built in datums for each of the custom Minnesota county ellipsoids as well as for Sheboygan County Wisconsin Added more accurate 7 parameter datum transformations for Kertau 1948 and Timbalai datums Allowed use of linear units other than meters i e feet for New Zealand projections Corrected definition of Guam State Plane zone Added option when shifting selected features with the Digitizer Tool and selected control points when rectifying imagery to shift based on a distance and bearing as well as fixed X and Y offset distances Added Speed and Bearing display for each leg in the Feature Vertices dialog when a time stamp is present for each vertex i e such as GPS tracklogs Added support for getting positioning information for raster files like JPG etc from a greater variety of KML files Sped up display of dense point data sets with labels This was slower in v10 due to new automatic label placement feature Added new right click option to the Search by Attributes dialog to allow zooming to the selected feature s Increased the size of the displayed elevation and lat lon position on the GPS Information dialog No longer generate transparent PNG or TIFF files for KML raster exports using the super overlay feature if vector data is being exported This is to prevent problems with the multiple layers of images showing through in Google Earth when zoom in on transparent areas which
97. SE END_IF This allows conditional execution of groups of commands based on some variable value The variables could have been passed on the command line or the user prompted to enter one Added support for multiple levels of grouping layers in the Control Center You can now specify group names with lt sep gt embedded in them to provide multiple levels of grouping Greatly sped up rendering of some layers when reprojected particularly online sources that use Web Mercator when displayed in Geographic or Mercator WGS84 Fixed Security Vulnerability in NCSECW dll CVE 2010 3599 Fixed OpenSSL Heartbleed vulnerability This only affected the PostgreSQL support e New Supported Formats O O O Added support for many more 3D models from Collada DAE files Updated XTF eXtended Triton Format import to create mosaic from sidescan sonar data Added support for additional HDF5 elevation grid data formats Added support for loading AVS UCD format with 3D TIN features Added support for exporting loaded 3D areas and terrain layers to ASCII AVS UCD files Added support for playing back Hypack RAW files as NMEA GPS log files to extract the line information Added support for exporting line and polygon data to Kongsberg SIS plan format files Added support for exporting point data to Lowrance SonarLog SLG CSV files e Lidar Changes O LIDAR MODULE ONLY Added support transforming the coordinates of Lidar point clouds including
98. TIME metadata value for Lidar files to FLIGHT_DATE Fixed bug with editing the elevation value of multiple selected Lidar points with the elevation of some being set to an incorrect value or not changed at all Fixed bug with the color not being maintained from a provided Lidar point cloud if exporting and also checking raster layers such as through a script EXPORT_VECTOR Fixed problems loading Leica PTS files with extra blank lines at the end Fixed issue with elevation legend range not updating when you delete Lidar points or change their elevation e Path Profile Line of Sight Function Changes O Added option to File menu of 3D Path Profile Line of Sight dialog to save the rendered path profile to any supported vector export format including PDF files This is very handy for making documents including the path profile since it will scale cleanly Added option under Display Options menu of 3D Path Profile Line of Sight dialog to display any lines and areas that intersect the path With this option enabled you see a vertical line showing exactly where any of the other lines areas on the map intersect the 3D path If the intersecting lines have their own elevations they are shown at that elevation Otherwise they are shown at the path elevation Added right click menu to Path Profile Tool with option to show the last drawn path profile if you ve closed the dialog it was one This is useful for bring the path profile dialog back up for t
99. TOR command to control whether or not header row is written out for CSV export o Added support for exporting to the InRoads ASCII format using the EXPORT_VECTOR command o Added FORCE_EXIT command to allow forcibly closing a running instance of Global Mapper from a script o Updated EDIT_VECTOR command to not work on hidden disabled layers o Added support for limiting the range of contour generation using MIN_ELEV and MAX_ELEV parameters for the GENERATE_CONTOURS script command o Allow splitting DTED exports into folders by longitude using the EXPORT_ELEVATION command by adding a SPLIT_INTO_FOLDERS YES parameter Added support for calculating free space path loss during view shed calculation and making those areas with less power more translucent You can also see the remaining power at any location on the status bar as you move your cursor over the view shed Added display of the free space path loss in the path details for a line of sight calculation when Fresnel zones are calculated Updated the KML export to include a lt gx Track gt section for lines that have per vertex time stamps associated with them so you can play them back in Google Earth Added support for supplying radius for range ring generation from selected points through a RING_RAD_M attribute which supplies the radius in meters Updated the Simple ASCII Text export to use DMS or DM format for lat lon values exported to text files if the Position Display Format is configure
100. View menu to allow providing a custom formatting string similar to how you set up custom label display Updated display of nearest feature elevation in status bar to be in current Elevation Display Export Units rather than always native layer units Fixed problem with drag and drop not working from Windows Explorer on machines with Windows UAC enabled Made metadata display for layers in the Map Catalog Options dialog actually load the layer and show the full metadata rather than just general metadata Added after workspace name in title bar if the workspace has un saved modifications Added new right click option for layers in the Control Center to control whether or not export is allowed from the layer This is stored in workspace files as well Added new Position Display Format option to show lat lon values as just plain decimal with no degree symbol or hemisphere indicator You can select this in the Position Display Format setting on the General tab of the Configuration dialog Added optional tracking and reporting of errors encountered and commands and formats used so that we can better concentrate our development efforts on the most commonly used functions and also fix bugs even faster You can disable tracking under the Help menu No identifying information or mapping data itself is included with the reporting only statistics about what is being used and any errors Made the statistics displayed when right clicking on a numeric column in
101. WHAT S NEW IN Global Mapper v16 0 e Significant New Features o Dramatically sped up many operations by making use of multiple cores The following operations are now much faster in most cases Contour Generation View Shed Calculation Gridding of 3D vector features Search by Attributes Name Creation of area features from equal colors elevation slopes LIDAR MODULE ONLY Automatic classification of Lidar ground points 20X as fast or more LIDAR MODULE ONLY Initial display of height above ground color for Lidar point clouds Reprojection of layers covering a large area of the world o LIDAR MODULE ONLY Added option to automatically classify building and high vegetation i e tree points from a raw Lidar point cloud This is a very powerful option on the Lidar toolbar and via the LIDAR_CLASSIFY script command that combined with the existing and much improved option to automatically classify Lidar ground points allows automated classification of over 90 of ground building and high vegetation points from a raw Lidar point cloud o LIDAR MODULE ONLY Added option to automatically extract building outlines from classified Lidar point clouds This is a very useful option on the Lidar toolbar that combined with the automatic classification and manual cleanup tools can allow very efficient extraction of 3D building outlines from Lidar point clouds o LIDAR MODULE ONLY Added option to automatically extract tree po
102. WTR attributes if both are present Added support for loading NetCDF files with time dependent variables Added support for adding generic text files like XYZ to map catalogs Updated OSM XML import to automatically try to find a connecting path for areas formed from relation tags when the specified lines ways don t connect Added support for ASTER LIA HDF files with 14 bands of data Also added all layer metadata to HDF files Made jpf be recognized extension for JPEG2000 files Added option when batch converting to JPEG2000 and ECW format files to control whether or not the projection datum information is stored in the header Added option to Create Uncompressed Files when batch converting to Erdas Imagine files image or elevation files and to Create Overview Layers for elevation Erdas files Updated KML KMZ export to fix an issue with the name of area features showing up in the balloon text box when you specify a custom HTML description Updated KML KMZ export to not export area and line label points when the feature has labeling disabled in the main view Reorganized the vector KML KMZ export dialog so that it will fit on smaller screens o Automatically chop up large vector areas gt 1024 vertices when exporting to KML KMZ to ensure they always render properly in Google Earth o Allow cropping to selected area features when exporting DVG and SVG format files o Fixed issues with banded shadows when zoomed out on some
103. XPORT_RASTER script command o Made variable replacement work inside DEFINE _ MAP LAYOUT sections o Added support for PTS_AT_INTERSECTIONS parameter for EDIT_VECTOR script command to allow creating points at line intersections o Added support for providing text values for many TIFF GeoTIFF tags when using the EXPORT_ELEVATION and EXPORT_RASTER script commands with the GEOTIFF type Supported parameters are TIFF_COPYRIGHT TIFF_IMAGE_DESC TIFF_DOC_NAME TIFF_PCS_CITATION TIFF_DATETIME and TIFF_GTCITATION o Added INC_COLOR parameter to EXPORT_VECTOR script command to specify that colorized LAS should be created o Added option to generate ESRI aux xml projection files from export commands by adding GEN_AUX_XML_FILE YES to the command o Added support for ignoring the attributes lists of features when comparing them to see if they are duplicates with EDIT_VECTOR by adding IGNORE_ATTRS YES to the command o Added option to save a depression filled DEM from a GENERATE_WATERSHED command to a GMG file by providing a FILLED_DEM_FILENAME parameter Fixed checkered export from some online sources like 1 arc second NED and SRTM Added new right click option to Swipe Tool to maintain the swipe after releasing the left mouse button Then the swipe will be maintained for any exports Added support for using Epanechnikov kernel when calculating density grids Updated density grid generation to be volume preserving Added options to density grid gen
104. a box only features that are completely contained within the box will be selected This is useful for things like selecting a point feature on top of a line or area feature Corrected ERS header export to be correct when exporting BIL files or files with export units of arc degrees Fixed bug when exporting raster KML KMZ files to a filename with a special character not allowed in XML files like an ampersand Fixed problem with per vertex time stamp values being lost in some cases when graphically moving or deleting vertices with the Digitizer Tool Added new built in point type Address Label You can disable this type to turn off the center address labels automatically applied to downloaded online sources like TerraServer USA and DigitalGlobe Added new built in area type County Subdivision Added option to maintain the map location under the cursor position when using the mouse wheel to zoom You can do this either by checking the option on the Advanced list on the General tab of the Configuration dialog or holding down the Ctrl key when scrolling the mouse wheel Added new options to Google Maps export to allow easily adding additional controls to the map displayed by the default HTML file that is generated such as a map type selected Also made double click zooming be enabled by default Added transparency slider to the Google Maps and Virtual Earth export dialogs to allow setting the default transparency level for the exported map
105. a format of BMP Updated GENERATE_ELEV_GRID command to support additional display options like those also supported by the IMPORT command Added new LABEL_FIELD_FORCE_OVERWRITE parameter for IMPORT command to specify that any LABEL_FIELD value should be applied to all features even if they already have a display label Added support for KML_MAX_LOD_PIXELS parameter for EXPORT_RASTER command to specify the value to use for the lt maxLodPixels gt tag in generated KML files e Added new box maximum resampling methods for terrain layers to allow resampling elevation layers by finding the maximum rather than average value within a box of samples Automatic sub sampling of elevation layers during export will automatically use these rather than box average resamplers Updated SVG export to include display labels Drastically sped up calculation of raster statistics for contrast adjustment for JPEG2000 and ECW format files Added elevation under cursor if available to the current projection coordinate display on the status bar Added option when combining area features with the Digitizer Tool to only combine those with compatible attribute values Updated elevation legend display to only display the range of layers that are on screen and not all loaded layers Made the last selected projected system for files with an unknown projection be remembered between runs Added new option to default auto contrast adjustment to a linear min max stretch
106. ablets Also if your drawn feature is nearly closed you will be prompted whether to create an area or a line feature Improved the labeling of areas so that the area label will always be inside the area Updated KML export to allow displaying point features above the terrain surface Updated KML vector export to have option to use symbols displayed in Global Mapper for point features rather than default push pin Added new Lidar import option to pull in data in preview mode which just pulls in every 10th point for quick load and display You can now also choose to only pull in ground shot points during a Lidar point cloud import Added option to Control Center to create a layer with a point feature at the center of each gridded elevation layer cell center This provides a handy way to edit elevation layers as you can easily edit the elevation values of the created points or remove problem points then create a new elevation grid from the edit points When displaying a 3D path profile of a 3D line feature show the 3D line feature as well as the elevation profile Allow selection of the text font to use when displaying a 3D path profile rather than just the color of the text to display Updated printing to a file to allow the full resolution of the selected printer always be available regardless of paper size Added new option to range ring creation to allow creating rectangles of the specified range rather than rings Added LOAD_STYLE_FILE s
107. ading some LAS files with lat lon XY coordinates Fixed issue in v14 1 with incorrectly positioned points in some ASCII files loaded as point clouds Allowed Lidar point cloud export to MapInfo MIF MID and TAB MAFP files and also allowed batch converting Lidar point clouds to Shapefiles Made colorizing Lidar point clouds using the EXPORT_VECTOR script command work properly with online imagery sources Fixed issue in v14 1 with exports to new LAS LAZ files dropping the GPS time from input files if exporting to LAS v1 2 or earlier e Global Energy Mapper Only Features O Added PILE VOLUMES command in the Digitizer Tool to allow quickly measuring the volumes of area features piles when there is terrain loaded with the piles in the surface e New Supported Formats O O Added support for loading Natural Resources Canada NRCAN BYN geoid offset grid files Added support for loading text files with a pen up down column with values of 1 for pen down There is a new checkbox option for this on the ASCH import dialog Added support for loading DECC wind speed text files for the UK e Analysis Function Changes O Added support for combining comparing terrain layers with more than one selected layer in each of the sets of terrain layers Updated water rise calculation to find flow to any elevations lt to the specified fixed elevation rather than only exactly equal elevations Updated watershed ridge line and water rise calculati
108. adjacent vertices are selected e Fixed loading of accented characters from UTF 8 encoded GNIS text files e Sped up the creation of equal value areas from gridded layers in some cases particularly with very complex shapes being generated as the result e Fixed issue with the scale bar being incorrect on some raster exports e Fixed error loading some Arc ASCII Grid GRIDASCID files from v13 1 e Fixed problem where rectifying an image when you have a map catalog of vector layers loaded causes all layers in the map catalog to be loaded for display in the reference view e Made main Global Mapper window remember its location between runs on multi monitor systems when closed on secondary monitor rather than coming back up on main display screen e Made KML KMZ files which contain NetworkLink elements referencing KMZ files automatically download and load those KMZ files Previously only linked KML files would work e Fixed issue when exporting Shapefiles from features with different attribute sets with multiple attributes over 10 characters in length with the first 10 characters being the same e Added option to DXF export to control whether line features with just a single elevation like contours are written out as full 3D lines or just lines with elevation In v13 1 the behavior had been changed to always write them as full 3D lines this allows you to get the earlier behavior if needed e Added Check All and Clear All buttons to many dialogs
109. ale factors increased from 6 to 9 digits of precision used for State Plane projection definitions Made Provisional South American Datum 1956 PSADS56 export correctly to MapInfo files Fixed New Zealand EPSG codes 27291 and 27292 the false easting and northing values were wrong Corrected import of scale factor from custom datum transformations specified with TOWGS 84 in PRJ files Improved accuracy of Bursa Wolfe datum transformations with large rotation angles i e more than a few arc seconds of rotation Corrected use of wrong datum transformation in some cases when using the non specific NAD83 CSRS datum e Scripting Changes O Added support for simplifying reducing line features with the EDIT_VECTOR command using the SIMPLIFICATION parameter Added support for converting area features to line features with the EDIT_VECTOR command using the CONVERT_AREAS_TO_LINES parameter Added support for inserting vertices at line intersections and splitting those lines at those intersections with the EDIT_VECTOR command Added support for assigning unique ID attribute values to matching features for an EDIT_VECTOR script command using the UNIQUE_ID_BASE parameter Made SAVE_SCALE_AND_LEGEND work for EXPORT_PDF command Added FORCE_RGB parameter to GENERATE_EQUAL_VAL_AREAS script command to allow forcing the color attribute to use the full RGB color and not a palette index o Added support for EXPORT_HEADER parameter for EXPORT_VEC
110. alestine Clarke 1880 RGS and Sphere Radius 6371000 m as built in ellipsoids available for use with custom datums Fixed problems using and saving the Quebec MTM projection for which support was added in the last release Made the names of state plane zones listed on the projection selection dialog include the FIPS zone number of the zone Allowed the use of the NAD83 HARN HPGN datums with State Plane projections Fixed problems decoding the Lambert France projections from old format PRJ files and workspaces Increased accuracy of OSGB36 datum conversions Made central meridian scale factor for Lambert Conformal Conic projections only be used in the 1SP both first and second standard parallels the same case since it can only be unity 1 0 in the 2SP case Fixed decoding of UTM zones in the Southern hemisphere from some new format PRJ files Fixed Transverse Mercator projections when used with datums based on perfect spheres these would only have been custom datums based on a spherical ellipsoid Added option to custom shader dialog to allow initialization of a custom shader from a Surfer CLR shader palette file When creating or editing a map catalog and using the Add Loaded Files or Add Onscreen Files buttons made files from other loaded map catalogs be added as well if they are not already in the map catalog being worked with When saving a workspace with any gridded elevation data loaded made the current shader and
111. alog to allow the height used in the Panorama Walk mode to be manually set and to also specify whether the height should be a constant height relative to the ground or a constant height relative to sea level In the 3D viewer made the vertical exaggeration and background color settings be remembered between instances of running the software e Batch Convert Reproject Changes O Added option to the Batch Convert Reproject dialog to allow the specification of an additional string to append to the names of the files created during the batch convert process o Added option to the Batch Convert Reproject dialog to allow some files to only be used as filler for other files To mark files this way simply right click on them in the source files list and select the option to just use them as filler files o Added option to create 1 bit black and white GeoTIFF files with the Batch Converter o Reduced memory requirements during batch conversion when using all loaded files as filler data and there are lots of files being converted Image Rectification Changes o When shift clicking in the Reference pane of the image rectification dialog made the selected coordinates be rounded to the nearest minute for lat lon values and the nearest 1000 units for other projections o Made the image rectification dialog start out maximized if the dialog was maximized the last time the user closed the dialog o Made the Latitude and Longitude coordinate values in
112. also be created allowing immediate viewing of the maps Made significant improvements to the triangulation and gridding of 3D point line and area data Not only is the process now MUCH faster especially for large triangulations but it also now supports treating lines as constraints i e breaklines saving the generated triangulation as a separate vector layer and making elevations for source vector features be relative to the elevation from loaded terrain data You now also grid a much larger number of points at once well over 10 million points have been tested with no problems Added option to Shapefile export to split the export into separate files by layer This allows you to easily break your data up into separate Shapefiles based on the layer description of the features being exported The layer name for each file will be appended to the end of the selected export filename Added fuzzy transparency support to allow for transparency for a raster layer to be set up so that all colors near a selected transparent color can be marked as transparent This is useful for removing collars from lossy formats like JPG ECW and MrSID Allowed 3D area features to be created in Shapefile export Added support for loading RIK Swedish Topo format raster files Added support for loading OCAD format files Added support for loading MapTech PCX charts Load these from the MapTech hdr file in the ChartHdr folder Added support for loading OziExpl
113. alue areas to use the border style of whatever area type is selected for the new areas This allows you to turn off the borders e Fixed display of bearings relative to Magnetic North rather than True North They were shifted the wrong direction based on the magnetic declination at the location e Made custom shortcut keys work when ALT is one of the keys specified with the shortcut WHAT S NEW IN Global Mapper v14 1 e Significant New Features o Numerous improvements for working with Lidar data See special subsection detailing changes below o Added support for licensing using USB dongles allowing you to freely move single user licenses between any number of machines o Added new Analysis menu option to compute the areas covered when you raise the water level of selected areas or a fixed elevation by some height This is useful for modeling the rise of a flood plain by some height or by modeling sea level rise o Added option to Analysis menu to allow calculation of Voronoi Theissen polygons for loaded point features o Updated download of online imagery to have an option to control whether or not the source is cropped just to the specified bounds or if panning around the data set O is allowed Renamed Terrain Analysis menu to Analysis to reflect the addition of several new analysis functions that apply to non terrain data Also added some existing analysis functions here like the ability to create elevation grids from loaded 3D vec
114. ames like RED BLUE GREEN etc in addition to specific RGB colors e Added buttons on the screen capture dialog allowing you to easily increase or decrease the capture size by a multiple of the default size e Drastically sped up exports of multiple terrain layers to new GeoTIFF elevation files e Fixed issue in v13 2 and later with pan arrows not showing at edges of map display in image rectifier on some touch screen systems Fix in v14 0 1 e Added new right click option on vector search dialog to minimize the size of each column added in v14 0 1 WHAT S NEW IN Global Mapper v13 2 e Significant New Features O O O O 0 O Updated DigitalGlobe premium imagery with access to new DigitalGlobe servers with faster access to more up to date and higher resolution imagery in most locations Added support for specifying custom paper sizes for geospatial PDF export Added MapQuest OpenAerial Worldwide Imagery as built in source Load many geospatial PDF files at higher resolution Added option to most raster elevation exports to control the resampling used during export right on the export dialog Added built in access to geologic map datasets for most of the world using the File gt Download Online Imagery Data menu command Added new build in USA Topo Maps source replacing the msrmaps com USGS DRG source which is no longer offered by Microsoft as of May 1 2012 Make WMS sources with a specified legend image like some of the Ge
115. an ellipsoid Note this will make any saved Equirectangular data from GM prior to v15 0 4 not match the results of anything after v15 0 4 This is a rarely used projection though Improved handling of Local projections with rotations to and from WKT PRJ files to match Esri Added built in Naparima 1955 datum Added support for additional EPSG codes Updated datum shift file for ED50 Spain Portugal to new file from 2009 Fixed Transverse Mercator transformation with negative northing values and displaying in a projection system with a datum based on a sphere rather than an ellipsoid e Online Source Changes O Added built in links to all NASA GIBS Global Imagery Browse sources This includes daily imagery from the AQUA MODIS and TERRA satellites among many others There is an entire NASA GIBS group in the online download dialog that provides quick access to all of the sources Added built in links to Landsat8 downloads from USGS Earth Explorer The Landsat8 data is not available as a streaming source so the new source just takes you to the web site Added built in links to online Lidar data from the USGS and other US agencies under new Lidar group in online source dialog The USGS National Lidar Dataset is linked to via EarthExplorer The bounds you specify will automatically be sent to the EarthExplorer site for easy download Added built in GlobCover Land Cover ESA 2009 source This source provides land cover data for the entire
116. ane projections This allows for using things like grid vs ground coordinates Modified the Timbalai 1948 datum to use the Everest 1830 1967 definition ellipsoid internally Fixed problem with Hotine Oblique Mercator A projection acting exactly like a Mercator projection Corrected false northing value for Lambert IV Corse projection Corrected central meridian for the Quebec MTM Zone 2 projection Added ability to specify a scale factor for Mercator projections Improved handling of some Lambert France projections in GeoTIFF files Fixed decoding of Ireland 1965 datum from TAB files Fixed problem from v8 00 release that caused some PRJ files to not be loadable Fixed problems with northing values for a handful of State Plane zones like the NM Fast zone with the NAD27 datum o Fixed problems with saving and restoring the Hotine Oblique Mercator B and the derived Michigan Georef projections to from PRJ files o Fixed problems saving projections using a longitude of pole or a true scale latitude parameter to new format PRJ files Made the current view scale be display on the status bar When running the cursor over line features with recognized addressing attributes the address under the cursor will be displayed on the status bar Added support for points to have dot or square symbols of any size and color when loaded from a file Symbol attributes now support symbol names of DOT_CUSTOM_ lt SIZE gt _ lt RED gt _ lt GREEN gt _ lt BLUE gt
117. antly increased speed of contour generation Automatically treat signed 16 bit samples from imagery TIFF files with values of 32767 as void areas Fixed problems reading projection information from some newer MrSID files Added display of the target compression ratio used when creating a MrSID file to the metadata display for that layer Allowed cropping to selected areas when batch converting to vector formats Added support for controlling multi band GeoTIFF exports from scripts using a new BAND_EXPORT_SETUP parameter for the EXPORT_RASTER command Added support for exporting a new raster with the same color palette type as the file being exported using the EXPORT_RASTER command by using the PALETTE KEEP_SOURCE parameter Corrected creation flattening of terrain from 3D area features with islands Made Lidar files share the elevation shader with all loaded elevation and Lidar layers making them consistently color across multiple layers Fixed problems with missing data from Italian TAF that have invalid records Made scaling of built in custom shape symbols work properly Fixed handling of multi line text in map layouts when saved to a workspace Fixed problem with map layout text becoming upper case when loaded from a workspace Improved detection of datums from P190 files Corrected display of elevations on real time cursor display for path profile display when doing a line of sight analysis with earth curvature enabled Changed sh
118. aphic Lat Lon projection to allow re centering a lat lon display on a longitude other than 0 This allows for easily wrapping maps near the anti meridian Added built in support for Mars 2000 sphere and polar sphere datums and ellipsoids Added support for Maine CS2000 State Plane zones Updated the built in Lambert 93 projection to now be a zoned projection supporting the base Lambert 93 definition as well as the CC 42 through CC 50 zones Renamed Central Meridian Scale Factor in projection selection dialog to just Scale Factor so that it would fit on the screen better When writing out State Plane projections to PRJ files save the name of the State Plane zone in the projection name at the start of the PRJ file Added support for modifying the location relative to which the extra scale factor is applied to State Plane projections This is for advanced users with some very unusual modifications to State Plane projections Corrected EPSG codes and added new ones for many State Plane projections Fixed problem with an extra scale factor being applied to some State Plane zones extracted from ECW files this bug was introduced in v10 01 Corrected transformation for Kertau 1948 PRS92 and Timbalai 1948 datums incorrect since v10 01 Improved accuracy of NTF France datum conversions they now agree with the official results to within 1 centimeter Improved accuracy of ROME 1940 and WGS72 datum transformations Updated Robinson project
119. are prevalent in vector exports Made filename parameters for script commands referencing loaded files like COMBINE_TERRAIN UNLOAD_LAYER etc also match against the description of loaded layers in case no matching filenames are found This allows matching against created layers that are not backed by a filename like the results of a previous COMBINE_TERRAIN or GENERATE_CONTOURS command Allowed use of PROJ_EPSG_CODE parameter with LOAD_PROJECTION script command Fixed problem decoding projections from MapInfo files with units other than meters and specified false easting northing values Added option to view shed generation to specify a receiver height above the terrain surface to check for visibility at when use a beam with restricted transmission angles Improved export of 3D line and area features to PLS CADD XYZ files Update PLS CADD export to write out a sequential ID number in the first field for point features with no POINT_DESC attribute value Fixed problem loading some WMS data sets Added new option to the Global Mapper Package export dialog to specify that the full style for all features should always be saved to the generated file even if a feature is using the default style for a type This makes it easier to save data sets with the same styling for sharing between users Made Feature Edit dialog resizable Made types that are disabled in the type filter on the Vector Display tab of the Configuration dialog not show up in th
120. area to select only those immediately connected or those that can be reached with any connect path Updated option to crop a selected area to a selected line to allow cropping multiple selected areas to the line O Added option for creating more than 1 point offset from an existing point new in v14 0 1 Added support for adding elevation statistics to selected point features in addition to lines and areas which are already supported using the Digitizer Tool This includes adding SLOPE and SLOPE_DIR attributes as well as ELEVATION from the loaded terrain Updated calculation of elevation statistics for area features to calculate the 3D surface area and store it as a SURFACE_AREA_3D attribute for each area Fixed issue in v13 2 with slow performance i e apparent lockup trying to snap in the vicinity of area and line features with an extremely high i e tens of thousands or more number of vertices Updated joining of lines with per vertex timestamps like tracklogs to keep the per vertex timestamps Added new View menu command to zoom to the features selected with the Digitizer Tool When creating range rings around multiple selected point features and choosing the option to combine the results immediately combine the results rather than waiting until a subsequent operation with the combine checkbox not checked Updated options to select areas in other areas or to apply attributes to areas from other areas to allow just doing those
121. ase Updated the web format exports to treat an export PNG or JPG file where all pixels end up as background pixels as empty so they should not be exported if the Skip Empty Tiles option is checked Fixed issue with Show Labels for Lines of This Type setting not always working on the Line Styles tab of the Configuration dialog Fixed issue with sample spacing being incorrect for raster and elevation exports when gridding an export to selected areas and multiple areas resulting in the same output filename Fixed loading of some online sources like World Imagery and World Topo Maps from workspace files Made the last filename setting i e use source filename or use quad filename description used be remembered when batch converting Fixed inconsistency with User Created Features layer still being displayed as User Created and Modified Features in some locations Fixed rare issue with some parts of double precision Surfer Grid files not displaying Updated reporting of Metadata for vector layers to separately report how many deleted and non deleted area line and point features there are Updated Control Center display to include the feature count next to each vector layer Fixed font assignment when splitting up features based on an attribute from the Control Center Updated creation of gridded surfaces by flattening areas to always use the flat area with the largest elevation at a given location if multiple areas are
122. at shared end points but slightly different along the path and also to fix some incorrect duplicate marking O Fixed export of rendered vector data to CADRG CIB files with the EXPORT_RASTER script command It wasn t saving the rendered vector data when INC_VECTOR_DATA YES was added as it should Fixed generation of contours in feet with GENERATE_CONTOURS when specifying a MIN_ELEV and MAX_ELEV Those values should now be interpreted as feet when generating contours in feet Added support for some common incorrect values for the TYPE parameter for commands like LIDAR_LAZ LAS LAZ and KMZ They will now work as aliases for the intended type e Projection Datum Changes O Support automatically getting projections from SRS strings like SR ORG 7044 where 7044 is the projection code This also works with the Init from EPSG button on the projection dialog Support automatically getting projection from SRS strings like urn adv crs ETRS89_UTM33 Made projection files and EPSG codes that match to Swedish Grid and MGA zones that also match a UTM zone use the country specific projection name Changed unit name Chains Sears to Chains Sears Gunter to reflect common usage Fixed saving of interplanetary datums to workspace files Fixed read write of GeoTIFF files using the Hotine Oblique Mercator Azimuth Natural Origin projection like Alaska State Plane Zone 1 Made GeoTIFF export with Polyconic projection write out th
123. at the point location Added option to create point features at the min max elevation locations along selected line features when calculating elevation statistics along lines like you could with areas Added option when applying terrain elevations to selected area and line features to only apply the terrain elevations to selected vertices rather than the entire features Made 3 point rectangle area line draw support snapping to horizontal vertical locations Greatly sped up operations that select or create a large number of features especially point features Improved option to reduce the vertex count of selected areas It will now chop at more intelligent locations to result in less areas Also allows reducing all the way down to 3 vertices each without locking up Added new Advanced Selection option to select any line or area features that intersect or touch a selected line feature Made fixed width line features draw at that fixed width when selected rather than at just the width of the Selected Line style When editing a feature and assigning it to a newly created layer make the new layer have the same elevation units as the layer the original feature was in o When selecting a new location for a point or vertex add an option to select the point location from a map o Added support for automatically fixing invalid polygons where the child island is on the parent o Added option when creating distance bearing COGO lines to spe
124. ate Plane zone rather than before the false easting northing values as before e Scripting Language Changes o Allowed exports cropped to a polygon from a file be cropped to multiple polygons with the new POLYGON_CROP_USE_ALL parameter for the export commands o Added CLIP_COLLAR_FLAGS parameter to IMPORT script command to allow saving of per edge collar cropping flags o Added COLOR_INTENSITY_FULL parameter to IMPORT script command to allow specification of higher resolution color intensity for raster layers from 0 to 512 rather than 0 to 20 o Allowed the polygon to use when feather blending to be specified from a file using a FEATHER_BLEND_POLY_FILE parameter with an IMPORT command in a script file o When using the EXPORT_RASTER script command in conjunction with a polygon crop file only use the bounds of the crop polygon for the export as the export bounds if the export bounds are not explicitly specified In addition for gridded exports with a crop polygon don t export grid cells that are completely outside of the crop polygon o Fix error with some layers not showing up in the output when using the EXPORT_RASTER script command in conjunction with gridding o Added new parameters to the EXPORT_ script commands to allow specifying how gridded tiles should be named o Allowed FEATURE_SEP values for exporting simple ASCII text files with the EXPORT_VECTOR script command to specify feature separators other than just none or a bla
125. ate segments that much more exactly match the requested bearing previously there could be errors of a few tenths of a degree Added option to specify the export bounds for terrain gridded elevation exports as pixel is area rather than pixel is point This option is available under the Advanced section of the General tab of the Configuration dialog e Updated Google Maps export HTML file to prevent zooming in beyond where the data would be displayed e Fixed rare crash loading some improperly formatted Shapefiles e Made attributes for S 57 S 63 files include both the raw value and the associated text for that value if known rather than just the associated text if known e Fixed extremely slow loading and searching of some Tiger Shapefiles e Fixed usage of grid tightness and fill to bounds settings when loading and gridding multiple Lidar LAS files at a time Previously those settings would only be used on the first file then the default settings would be used for the rest e Added support for getting per vertex elevations from lt gpxx Depth gt fields for tracks in GPX files even if no lt ele gt tags are available e Made adjusting the elevation units for map catalog layers work e Added support for getting roughness values for areas on export to Wasp map files from attributes named ROUGHNESS or ROUGH e When combining range rings create an area feature rather than a line if the boundary if a valid area
126. ated piecewise affine should have been used Corrected half pixel shift when loading SRTM30 and SRTM30 files Added Ctrl S as a shortcut key to the image rectifier dialog to save the GCP list to a file When loading a GCP file in the image rectifier dialog prompt the user to remove all of the current control points if there are any Added option to the advanced section of the General tab of the Configuration dialog to specify that when cropping to an area feature on export that any cell that has any part in the crop area should be kept rather than just those for which the center of the cell is inside the crop area When cropping to selected area features during batch conversion prompt the user to see whether they want the export files to have the bounds of the file being converted or the selected area features Made the screen capture dialog remember the last format used and select it by default within a single run of Global Mapper Improved display of some BSB charts that cross the anti meridian Fixed error loading some NITF imagery data sets that use JPG2000 compression Improved positioning of NITF imagery that uses RPC polynomial based positioning Prompt the user to specify whether 16 bit JPEG2000 and ECW files are elevation or imagery files rather than just assuming they are elevation Fixed problem with view background color not being in generated image optimized palettes in all cases Made script exports automatically create the
127. atible with more applications WHAT S NEW IN Global Mapper v12 00 e Significant New Features o Added built in access to the NAIP color high resolution imagery for the entire United States via the File gt Download Online Imagery Data menu command o Added built in access to the ASTER GDEM terrain data at 1 5 arc second 45m resolution for the entire world via the File gt Download Online Imagery Data menu command Added built in access to premium Parcel data for the entire US via the File gt Download Online Imagery Data menu command Added support for automatically delineating stream networks and watershed areas using loaded terrain DEM data using the File gt Generate Watershed menu command Added Point Styles tab to Options dialog for vector layers with point features allowing users to setup the styling of points in a layer Now users can use the default type based styling apply a single style to all point features in a layer setup an attribute based styling system that styles the points based on the value of an attribute value or the display label or randomly assign colors to the dot or custom symbols for points in a layer Updated the Download Online Imagery Data interface to group data sources to allow easily finding data sources of a particular type or covering a particular area Updated the Control Center to support assigning groups to selected layers via the right click menu Those groups can then be collapsed in the Control C
128. ating new line or area features with the Digitizer Tool the length and enclosed area if applicable will be displayed in the status bar as the new feature is drawn When moving or joining vertices of line or area features with the Digitizer Tool the length and enclosed area if applicable will be displayed in the status bar as the vertices are moved e Measure Tool Changes O When creating a new line feature from a measurement in the Measure Tool set the length of the measurement to also be the default display label When displaying length and other measurement strings such as with the Measure Tool remove any trailing zeroes from the length to make it more compact Image Rectification Changes o Added new hotkeys to the image rectification dialog Now Alt R will act like pressing the Update Selected GCP button Alt Q will move the GCP list selection up and Alt Z will move the GCP list selection down o Improved the crosshair cursor used in the Zoomed and Reference views of the Image Rectification dialog o Improved the symbols used in the image rectification dialog for displaying ground control points to make it easier to see the data behind the control point Map Catalog Changes o Added the ability to display metadata about maps in a map catalog by right clicking on the map in the map list in the Map Catalog dialog and selecting a popup menu option to display metadata about them o Added the ability to have map catalogs be displ
129. ation Allowed use of up to 20 zoom levels instead of 19 when generating tiles for display in Virtual Earth Fixed problem with specified sample spacing not being maintained when gridding to a fixed width in ground units during export and also applying overlap This bug was introduced in the v10 02 release Updated custom shader creation to allow initializing values between currently specified min max values when using the Evenly Space Elevations option rather than just replacing the existing number of values Added support for loading rotated MrSID format files Added support for loading additional MODIS data sets from HDF format files Added support for loading data from netCDF format files with multiple plottable data sets in them Fixed problem with duplicate points being exported to SEGP1 files when points are in both line and point form Updated KMZ vector exports to copy any files referenced by link attributes to the output file Added support for loading gzipped text files using the File gt Open Generic ASCII Data File menu command Updated 3D path distance reported in path profile to work correctly for multi segment lines Added support for using styling information from KML KMZ files that use StyleMap tags Updated the TomTom OV2 export to generate a BMP file with the same name as the OV2 file with the first symbol found in the points being exported Allow creating flattening terrain from areas with per vertex elevation
130. ation dialog Fixed color of Lidar points on map legend to reflect custom Lidar colors from the Lidar Configuration tab e Analysis Function Changes O Added option to generate contour lines directly from 3D TIN areas This allows you to exactly maintain breaklines or other 3D features when you have a 3D TIN including those such as you might save from the gridding process There is a new Analysis menu command for generating contours from TIN areas Added option to 3D Path Profile to display the path from each terrain layer separately This allows easily comparing the surface of multiple loaded terrain layers along a path The new option is under the Display Options menu on the Path Profile dialog You can also right click on the profile itself when this option is enabled and select a new option to specify what color to use for each terrain layer line Added option to get the min max avg elevation in a corridor around a defined path for 3D path profile display and line of sight analysis There are new menu commands under the Path Setup menu on the 3D Path Profile dialog for defining an elevation corridor You can specify the corridor width and specify whether to use the minimum maximum or average elevation encountered along lines perpendicular to each sample location Added option to save a 3D Path Profile to a DXF file directly from the File menu on the Path Profile dialog Updated the Raster Calculator to support calculations from elevati
131. ative scaling factors are used on the Alter Elevations dialog Made up to 3 decimal digits of precision be used when saving elevation values to many ASCII formats Added option to remove archive files like zip and tar gz from the list of files to batch convert reproject by right clicking on the batch convert file list and selecting the appropriate option Added option to add files to the list of files to batch convert reproject from a text file containing a list of full paths to files To access this option simply right click on the file list in the Batch Convert Reproject dialog and select the appropriate option Added option to add files to a map catalog from a text file containing a list of full paths to files To access this option simply right click on the map list in the Map Catalog dialog and select the appropriate option Corrected half pixel offset in placement of MrSID files with embedded coordinate information When exporting Shapefiles do not export line features that are at a point all vertices coincident or area features that are a point or a 2 vertex line When exporting Shapefiles make sure that lines that get cropped to the export bounds maintain their original direction Made attributes for which none of the features being exported have a non empty value still be exported to DBF files that are created with Shapefiles Allowed confirmation prompt when closing loaded overlays from the Overlay Control Center to be disabl
132. ayed within a range of map scales o Fixed problems using files with Oblique Mercator projections in map catalogs o Fixed problems with some files particular packages with multiple data layer being included in map catalogs Corrected placement of Erdas Imagine img files with a UTM projection in the Southern Hemisphere Added support for getting projection information for MrSID files from aux files Added option to generate world files when exporting to BIL BIP BSQ format files While the information in the world files is also in the HDR file generated some software only checks for a world file By default both will be generated Added support for loading JPG files directly from zip and tar gz archives Fixed loading of some Raster Product Format RPF data like CADRG CIB data that had odd security descriptor values in the frame files Display a progress dialog when printing to show the progress of generating the high resolution image to send to the printer Drastically sped up the export of BMP files when capturing the screen to one or printing to one Made zooming the main map view with the mouse wheel only zoom half as far as the zoom buttons on the toolbar Fixed problems introduced in the v7 00 release with calculating view sheds when the global projection units are either arc seconds or radians Made the feature type lists on the Generic ASCH Import dialog be sorted alphabetically If the datum can not be determined from a GeoTIFF file
133. ayers with new right click option in Control Center This finally lets you easily export just one or more layers without having to disable the others export and then re enable them Added built in streaming online ASTER GDEM v2 worldwide terrain data set at higher resolution just over 30 meters and from a much faster more reliable server than the previous streaming ASTER GDEM v1 data set Removed GEM module All functionality that was present with the GEM add on module is now part of the base package Added new GeoCalc toolbar to access Blue Marble s Geographic Calculator coordinate transformation library if you have that installed The new toolbar has buttons to enable disable GeoCalc projections and settings and also a dedicated button to launch the Geographic Calculator Fixed security issue with MAPI DLL Secunia Advisory SA 51510 CVE 2013 0727 e New Supported Formats O O O OQ O Support Numerous New 3D Model Formats Collada dae PLY Stanford Polygon Library ply Blender blend OBJ Wavefront obj 3DS 3DS Max 3ds STL StereoLithography stl Added support for MrSID MG4 format image and Lidar files Added support for loading RDTED terrain data in CADRG RPF format files Added support for exporting Vertical Mapper Classified clutter Grid GRC Files Added support for loading LCV Land Cover Files Added support for ZMap Fault Polygon Files e Lidar Changes O LIDAR MODULE ONLY
134. bearings relative to the current projection grid system rather than true north when using distance bearing COGO input Fixed problems with cropping to rectangles or polygons during draw not working for online sources like DigitalGlobe Terraserver USA or WMS sources Added support for loading ellipse circle and rectangle features from EMF files Added support for saving elevation values from multi point Z Shapefiles Added option to combine all vector layers into a single layer when exporting a Global Mapper Package file Significantly sped up access to the SRTM and NED data sources using the File gt Download Online Imagery menu command Updated the Feature Info dialog so that if you double click on an attribute with a filename as the value that file will be opened with the associated Windows application Sped up display or rotated or rectified ECW and JPEG2000 files Added support for associating a text or web file to display when loading a workspace with a particular file This association is set via the right click menu on the Control Panel Fixed rare positioning problem with some Arc Binary Grid ADF files Sped up Global Mapper Grid exports from large collections of files like map catalogs Added option to batch convert vector files to the InRoads ASCII format Fixed problem exporting areas with duplicate islands holes when the export boundary passes through one or more duplicate islands holes Updated KML import to use feature nam
135. beled with the coordinate values at the edges Added option to create a line feature from selected point features Added a new option to the Advanced Feature Creation submenu of the Digitizer Tool to create lines connecting selected points to selected line features along the shortest path between the point and any of the selected lines Added option to Digitizer Tool to automatically move selected point features to the nearest point on selected line features Updated drawing of area and line features to allow easily drawing new segments at right angles to previous segments by holding down the R key Added option to only search on screen features in the search dialog e New Supported Formats Oo OF Ox O O Ov O 4Oe 3 nO O O Added support for loading ESRI File Geodatabase GDB data sets Added support for exporting loaded terrain data to SRTM HGT format files Added support for loading SegY format files Added support for loading NMGF Noise Model Grid Format files Added support for loading ATLAS BNA boundary format files Added support for exporting loaded data to XY Color text files Added support for exporting 3D triangle areas to Vulcan 3D TIN 00t files Added support for additional ways of encoding ASTER DEM data in HDF files Added support for loading NOAA NGA Geoid binary grid shift files Added support for additional types of Japanese DEM files in LEM format Added support for Geosoft Grid files with 8 byte
136. built in support for the Clarke 1858 Danish 1876 and Clarke 1880 IGN ellipsoids Added built in support for linear units of Clarke Feet Added EPSG codes for KGD Korean Geodetic Datum and Mercator projection used in Google Maps and Virtual Earth code 3785 Fixed problem with Dutch RD datum transformations in the v10 01 release Added support for decoding Bonne projections from OziExplorer map files Added support for decoding projection names from ECW files stored as EPSG lt epsg_code gt in the projection name and also encode unknown projections that way in exported ECW files Improved accuracy of KKJ datum conversions and added KKJ projection EPSG codes e Added option to Path Profile Line of Sight dialog when matching the elevation scale to the draw scale to allow users to enter a vertical exaggeration to apply e Added new batch conversion option to skip existing output files e Added new batch conversion option to disable anti aliasing interpolation in all cases even when it is automatically applied for reprojection or resampling Added new batch conversion option to minimize the main window while the conversion is running Updated batch conversion to not report any errors in the conversion until all conversions have been completed This prevents a batch conversion operation from stalling in the middle waiting for a user to clear an error message Updated the set position dialog to have an elevation field when editing the l
137. bute list when marking new waypoints from a connected GPS device Previously the elevation and time stamp attributes were no longer being saved Fixed problem with elevation units other than meters not being usable for Lidar LAS and Terrascan files loaded as point cloud data sets When loading TIFF files with 4 color channels and the 4th color channel is of unspecified type prompt the user to see if this should be treated as an alpha channel or an additional data channel like infrared This allows TIFF files created with Photoshop with an incorrectly marked alpha channel to be loaded and displayed properly Added new option to the Advanced section of the General Options tab of the Configuration dialog to automatically save backup copies of the current workspace every so often These backup copies will be created in the same folder as the workspace file and have the suffix auto_backupX where X is a number from 0 to 9 When generating new area features from the bounds of layers in the Overlay Control Center make those new areas have an attribute list consisting of the metadata from the layer Made the last selected file type be remembered between sessions on the GeoTIFF export dialog Made the last selected export target compression ratio be remembered between sessions on the ECW and JPG2000 export dialogs Made the last selected quality setting be remembered between session on the JPG export dialogs Projection Datum Changes o Added the Winkel Trip
138. calculating grid distance rather than great circle distance for distance calculations Fixed DTED export sizes near latitude change boundaries in the Southern Hemisphere Fixed bug loading points from some MapInfo TAB MAP or MIF MID files Added option when finding features with duplicate attribute values to delete the duplicates Fixed half pixel shift of Vertical Mapper grids from v11 01 release v11 00 was ok Added options to the Advanced Section of the General tab of the Configuration dialog to disable the automatic interpolation of reprojected or resampled raster layers on export and when zoomed way out on a layer Fixed problem with HATCH entity pattern name being saved as display label when loading DXF files Fixed added of extension to files when gridding to selected areas and the name used for an export file already has a period in it Fixed incorrect interpretation of 4th color band as an alpha channel for some ECW files Fixed display of bearings relative to magnetic north Fixed problems accessing WMS through secure https connections Added progress reporting to potentially lengthy transfers of features to a new layer or simplification of multiple line area features Added support for customizing the pixel radius used when snapping to existing features using the DWORD registry key HKEY_CURRENT_USER Software Global Mapper SnapToPixelRadius The default value is 10 pixels Significantly sped up the deletion of large numbers of
139. cify that the bearing provided is relative to the bearing of the last line segment rather than an absolute bearing o Added Add Update Feature Measure Attributes option to right click Analysis Measurement submenu in Digitizer Tool when multiple features are selected This is in addition to the Attribute Style submenu where it already is present o Fixed bug in v15 1 0 v15 1 2 that cause area buffers to be wrong in many cases when the current projection is not Geographic o Fixed bug existing since at least v14 that caused any new islands holes added to area features loaded from a file to be assigned to the wrong area when you save a workspace with the modifications and reload it This fix will also try and fix the island assignment when you load an old workspace with this mis assignment o Fixed bug in v15 1 0 that prevented selection of area features inside other areas o Fixed bug in resampling a line or creating perpendicular lines along a line at a fixed number of spaces if you didn t want to keep the original vertices o Fixed EXTEND line functionality that was broken in v15 1 o Fixed crash cropping loaded point Lidar features to a selected area and assigning the cropped results to a new layer o Fixed bug in 15 1 causing a lockup when creating point features from selected line and area features Also added progress bar so you can cancel the operation if it is taking a while o Fixed bug in v15 1 5 that caused crash when applying e
140. command Added option to create new point features at the label position i e centroid of area features by added CREATE_LABEL_POINTS to the EDIT_VECTOR command Added support for exporting ECEF coordinates when exporting to XYZ grid files using EXPORT_ELEVATION by adding EXPORT_ECEF YES to your command Added support for exporting Measure Shapefiles with EXPORT_VECTOR by adding EXPORT_MEASURES YES to the parameter list Updated SKIP_UNLOAD_ALL parameter for EMBED_SCRIPT command to skip the first UNLOAD_LAYER or first UNLOAD_ALL command in case you are embedding a call to a custom script that just unloads a single layer instead of all of them Added support for disabling the display of warning message when loading a workspace script by adding SHOW_WARNINGS NO to the GLOBAL_MAPPER_SCRIPT header line Added support for setting the color to use for the Daylight Shader using a DAYLIGHT_SHADER_COLOR parameter for the SET_VERT_DISP_OPTS command Made table join operations not case sensitive by default and added support for specifying that they should be case sensitive by adding CASE_SENSITIVE YES to the JOIN_TABLE script command Added support for ignoring whitespace during table join operations Add IGNORE_WHITESPACE YES to JOIN_TABLE script command to ignore whitespace Added support for controlling whether or not to ignore duplicate entries when doing a JOIN_TABLE command using a new ALLOW_DUPLICATES parameter Added support for specifying
141. contents to an image to crop the results to the bounds of the loaded map data Added a new option during watershed generation to save the depression filled DEM to a GMG file so you can use that later for repeat operations and have the depression filling already done If water display is enabled on the Vertical Options tab of the Configuration dialog show it on the 3D path profile dialog Allowed working with the underlying map while the 3D path profile dialog is open Added support for exporting palette based BMP files Updated folder selection dialog to include edit box for manually typing a path Fixed problems loading ECWP ECW file from the web from workspace script files Fixed problem with last point going out to full spacing in 3D path profile rather than to end of provided path when using a fixed spacing for the elevation samples Fixed issue with generated watershed stream network not saving to workspace files Fixed problems loading files larger than 4GB from map catalogs Fixed problems loading some BigTIFF files larger than 4GB in size Fixed issue from early v12 00 builds that caused box average resampling to automatically be used for some exports where reprojecting and changing units When creating tight buffers around line and area features with per vertex elevations copy the elevation from the nearest point on the source feature to the vertex in the buffer area so that the buffer area will be a 3D feature as well Made spaceba
142. converted to their escape sequence 26 Fixed number of zoom levels used for custom OSM TMS Google Maps sources The custom sources were only going to one less zoom level than specified i e if you specified to go to zoom level 18 it would only go to 17 Note to get the correct zoom level behavior you would need to re add your source Fixed issues drawing scaled semi transparent custom symbols or printing them The semi transparent areas would not render properly Corrected MAX_FLOW and DRAIN_AREA calculations for streams in watershed calculation They were showing values for anything flowing to the end point of a stream rather than just what could flow along that stream Made walk mode height stick on 3D view options dialog and also be remembered between runs Allow cancel of DTED file load Fixed searching on addresses with accent characters Fixed problem in v13 1 with some JPEG2000 files coming in with a Geographic projection but units of meters so it can t be reprojected Allowed larger embedded grid layers to be saved to workspace files without errors Changed alternate Cut shortcut key to be Shift Delete rather than Ctrl Shift Insert as that is what it is historically Ctrl X still works as before Fixed issues loading from WMS sources where the GetMap URL includes a question mark Fixed crash in 13 1 2 when performing a cut and fill volume calculation over a range of elevation values Fixed issue in v13 1 with Global Mapper G
143. cript command to allow loading gm_style files saved from the Styles tab of the Configuration dialog from scripts and also created new custom types from scripts Updated Shapefile exports to maintain the field type and length values if possible from the source data files if they are Shapefiles or DBF files New Supported Formats o Added support for reading Idrisi Vector VCT format files o Added support for reading side scan sonar data from XTF eXtended Triton Format files o Added support for reading Italian CML Cadastral Markup Language format files o Added support for reading Italian TAF Confidence format files o Added support for reading DWG 2010 format files e Map Layout Changes o Allow map scale to be displayed at a fixed percentage of the output device width o Updated map layout to support adding text anywhere on the map e Projection Datum Changes o Added built in support for Bessel 1841 Ellipsoid IGN72 Grande Terre New Caledonia and RGNC91 93 New Caledonia datums o Added support for creating custom datums that use a prime meridian other than Greenwich o Fixed problems loading Touratech TTQV cal files that use commas for decimal delimiters rather than periods o Updated Robinson projection to properly crop to world edges by default o Added the text NADCON to any datums that use NADCON datum transformation tables o Corrected definition of EPSG code 3057 ISN93 Lambert93 o Corrected Swiss Grid de
144. cript file Added vertex elevation if available to ZMap XYSegID format export Made the image rectification dialog display the errors in the X and Y direction for each pixel in addition to the total error Added support for customizing the number of decimal digits written out for the X and Y coordinates for a Simple ASCII Text export through the use of a DWORD registry key HKEY_CURRENT_USER Software Global Mapper ASCHExportCoordPrecision For example set this value to 6 to get 6 decimal digits for each X and Y coordinate Made the print header and footer font selections be remembered Made Ctrl Left Click on a photo point from an EXIF JPG file in the Feature Info tool bring up the normal Feature Info dialog rather than the image Added ELEVATION and TIMESTAMP attribute to EXIF JPG picture points if the EXIF data contains an elevation value or creation timestamp for when the picture was taken Made loading a workspace file with the File gt Open Data File menu command correctly restore the zoom bounds of the workspace file Updated the 3D Shapefile and Simple ASCII Text export to obey the export elevation units selection on the Vertical Options tab of the Configuration dialog Made DGN exports that have other DGN files as the source data maintain the level numbers and names on export to the new DGN file if possible Made the Control Center remember its size between runs Added support for Idrisi Raster files with a img extension Fixe
145. ct the new functionality Updated creation of buffer areas to allow combining overlapping buffer areas into a single combined buffer area Added option to create buffers some distance inside an area feature by specifying a negative buffer distance Updated area combine functionality in the Digitizer Tool to allow combining multiple groups of non intersecting areas into as many combinations as are possible Added option to export GeoTIFF files to a particular scale Added new option when creating flattening terrain from areas to taper the edges This provides for easy simulation of non flat areas like a sand bunker or hill while just providing a single elevation value for the area Added support for batch converting to multi band GeoTIFF imagery files e New Supported Formats O Added support for loading S 63 encrypted S 57 charts format files Use File gt Create S 63 User Permit menu command to generate a user permit file to provide to S 63 data provider to obtain S 63 files encrypted for use with your Global Mapper installation Added support for loading NV Verlag encrypted marine charts EAB BSB format Added support for loading TOBIN bas TDRBM II files Added support for loading OziExplorer OZFx2 and OZFx3 files Added support for importing GRIB I and II format data a format commonly used for meteorological data Added support for loading COLLADA 3D models like model dae files referenced from KML KMZ files Added supp
146. custom URL string and use quad for the quadtree name placeholder rather than x y and z Added option for custom WMS sources to draw using a single download per screen draw rather than using tiles This is useful for sources that add watermarks to each download from the WMS server This option is available by right clicking on a WMS source in the source list Updated TMS web export to generate a tileset XML file rather than an HTML file Updated TMS web export to generate a tileset XML file rather than an HTML file Added option to skip existing tiles for WorldWind Export allowing you to split a large export among multiple running instances of Global Mapper Fixed default display projection when loading the entire world of DigitalGlobe imagery It was coming in for viewing as a UTM projection centered on the prime meridian if nothing else was loaded which was not good for viewing much of the world Made the WMS WCS source selection dialog resizable o Moved the File menu option to load an ECW file from the Web to the online imagery download dialog as a new button o Added support for WMS sources that go from 0 360 rather than 180 to 180 e Projection Datum Changes o Added Norwegian Transverse Mercator NTM zoned projection as a built in projection o Added ED50 Malta and Sphere Radius 6378137 m as built in datums o Renamed Quebec MTM projection to MTM Eastern Canada to reflect that the projection is used for more than just
147. d When adding a new WMS data source if an existing WMS data source is selected initialize the server URL to that of the selected WMS source Updated CSV export to include all available attributes even if the values for all of them are empty Added support for Yards as a unit for specifying the radius of range rings Corrected problem with the default font being written to style files saved from the Styles tabs of the Configuration dialog rather than the font assigned to a type Updated the Path Profile Line of Sight tool to draw using the Measurement line style so you can now customize the appearance of that line Added support for loading data that is in zip files contained within zip files like the new Tiger 2008 data is typically distributed When measuring cut and fill volume from the Path Profile or Digitizer Tools initialize the cut elevation for each vertex to that of the input path if possible Added ability to save your 3D cut line to a CSV file on the Volume Calculation dialog When splitting Shapefiles by layer on export use the type name rather than the description string for anything other than unknown types Corrected positioning of some OSGB TIFF tiles Added support for loading arc BUE and BUEP features from SOSI format files Fixed problem loading area features with holes from SOSI format files Added Location button to Feature Info dialog displayed for point features allowing display and editing of point featur
148. d radius Updated build of map legend based on an attribute of vector features to also check the default attribute list for the feature type allowing you to assign alternate names for a feature type like different language for built in types Added new right click option to the 3D path profile dialog to create a 3D line feature from the active sub path Made the Path Details dialog displayed from a 3D path profile dialog modeless so you can interact with the path with the details shown and also show details of multiple paths if you have multiple profile dialogs open Include RETURN_NUM as attribute for Lidar point cloud points v14 0 1 change Made Help menu command to Release Remove licenses work for node locked licenses providing a mechanism to move licenses more easily Updated exports to KML KMZ when using a Mars or Moon datum to stick with that datum to facilitate using the data in Google Mars or Google Moon Updated image rectification dialog to make the mouse wheel work for zooming when in the reference image view if the mouse is in there rather than just always zooming the zoom map view Added Heading always instead of just when time available and Total Length columns to Feature Vertices dialog showing the length along to the line to each vertex Updated font selection dialogs for things like the distance scale and elevation legend to allow selecting any color and not just one of a few common colors Added option when saving searc
149. d GPX to look for a URL attribute from a feature and include it as a lt url gt value for points exported to the new GPX file Added option to the Advanced section of the General tab of the Configuration dialog to specify that exported PRJ files should append the prj to the entire filename like test ecw prj for test ecw rather than replacing the existing file extension with prj Added new Box Average 7x7 resampling method Added new empty square custom point symbol Allowed setting the Center Label on Line setting when editing individual line feature styles Improved support for SEGP1 files with only easting and northing coordinates Updated MrSID Lidar Decode SDK to v1 1 for faster MrSID MG4 Lidar decoding Added option to load EMF files as vector or raster the current default Fixed problems with missing data from some Tobin bas format files Added option when applying elevation from loaded terrain data to selected point features to control whether or not the unit label like ft or m is appended to the elevation Made layer metadata dialog close when the Escape key is pressed When the advanced option to always display lat lon values as WGS84 is checked display the lat lon values as WGS84 in the Feature Information dialog for point features in addition to on the status bar Fixed error exporting named points with no symbol to DWG files Fixed problems getting data from some secure HTTPS WMS servers Added Automatic se
150. d half pixel shift when scaling or rotating symbols Fixed issue with always on top fixed screen layers displaying twice in exported PDF files with non zero margin values Fixed issue with labels marked not to display still showing up in exported PDF files Fixed issue with the scaling of the header footer text in exported PDF files particularly at low DPI values Fixed issues with the placement of right aligned and centered text in exported PDF files Fixed error loading some raster KMZ files from workspace files Fixed problem with area labels not moving with the area if it is moved Fixed error loading some multi band PDS files Changed batch conversion to Arc ASCII Grid files to use asc extension instead of agr Added PLAY_SOUND script command to allow playing a sound file from a script Fixed out of memory errors when working with very large numbers of JPG files Fixed issues loading DXF files with lines 256 characters in length Added new option to the Advanced section of the General tab of the Configuration dialog to Auto Fake Location of Unpositioned Rasters Allowed Arc ASCII Grid files that are too large to load into memory still be loadable Made the option to Crop Right and Bottom to Export Bounds on the Gridding tab of Export dialogs work when gridding to fixed pixel size tiles Significantly increased display and export speed for some very large CIB CADRG RPF data sets Put GPX lt time gt field for lt wpt gt features
151. d in a multi load Fixed some rendering issues with some DGN files like those with 2D curves Drastically sped up sub sampled exports from Erdas Imagine img files with overview layers Added option to map catalog options dialog to always show the maps in the map catalog This also fixes an error message if you right clicked on a map catalog in the Control Center and set the zoom scales to show at to always then tried to open the Options dialog for the map catalog Made automatic positioning work for new USGS GeoPDF topo maps Fixed per vertex elevation lists being all 0 when loading SEGP1 and UKOOA files Made embedded picture images exported to KML KMZ files be referenced as lower case to make them work with Google Earth 6 1 which has a bug dealing with upper case file extensions Made 3D view dialog remember its last position Updated S 57 and S 63 ENC imports to list the chart scale as part of the layer description and provide all of the chart header information as attributes listed as part of the Metadata for the chart Added checkbox option to regular grid creation dialog to control whether or not to keep a grid cell area if any part is in the crop area Made the settings to turn layers on and off based on map scale also be used during raster and elevation grid exports to remove layers based on the scale Allowed larger web exports to be done before hitting an out of memory error Corrected behavior of Always Display All Labels
152. d layer or User Created Features Added EXPORT_ANY script command for automatically selecting from EXPORT_ELEVATION EXPORT_PACKAGE EXPORT_PDF EXPORT_RASTER and EXPORT_VECTOR based on the provided TYPE parameter Added new parameter to RUN_COMMAND to allow the result of the specified program to be stored in a variable The new parameter is CAPTURE_RESULT lt var_name gt where lt var_name gt is the name of a script variable Added support for providing CODE_PAGE parameter to EXPORT_VECTOR for Shapefile export to get exported results in difference code pages languages Added support for using a POLYGON_CROP_FILE with the GENERATE_ELEV_GRID script command Added option to keep the original layer and features around rather than closing them when using the SPLIT_LAYER script command Just add CLOSE_ORIG_LAYER NO to the script command to keep them open Added support for keeping all duplicates when using the JOIN_TABLE command by adding more supported values for the ALLOW_DUPLICATES parameter Added option to chop up areas to remove islands by adding REMOVE_ISLANDS YES to an EDIT_VECTOR script command Added option to split matching line features at the nearest location to point features from a layer using a new POINT_LAYER_TO_SPLIT_AGAINST parameter for the EDIT_VECTOR command Added support for duplicating features with multiple values in a single attribute when using SPLIT_LAYER You can now add a SPLIT_ATTR_SEP parameter with a
153. d layer for the new areas rather than always defaulting back to the User Created Features layer Fixed problem with the Z values assigned to area vertices being divided by 100 when you snapped to existing 3D points Vvertices Scripting Changes O Added support for adding vector features from inside a script by using a new DEFINE_TEXT_FILE command which allows embedded text descriptions of features right in the script and then loading with IMPORT_ASCII Added new Favorites toolbar option to Run Last Script from Run Script Command This option will run the last script that you ran via the File gt Run Script command Added support for generating contours from 3D TIN areas by adding GEN_FROM_TIN_AREAS YES to the GENERATE_CONTOURS script command Added new LOG_MESSAGE command to allow writing any string including variable values to the current script log Added support for copying attributes from point to line features using the COPY_ATTRS script command Added support for controlling the copying of attributes from areas to points when there are multiple areas containing a point with anew MULTI_AREA parameter for COPY_ATTRS Added support for controlling the copying of attributes from areas to lines when there are multiple areas containing a line with a new MULTI_AREA parameter for COPY_ATTRS Allow overriding the palette interpretation of a layer in the IMPORT or SET_LAYER_OPTIONS script commands by adding a PALETTE_NAME paramete
154. d projection from Diva GIS grd files Added MBTiles and RMaps exports to the File gt Export Raster Data menu Previously they were only on the File gt Export Web Format menu Improved handling of Hydra clutter Z1C files Fixed problems running out of memory when exporting to web formats Google Maps Bing Maps etc and cropping to areas that are separated by great distances so the entire tile set would be millions of tiles if not cropped to the selected areas Added option to web format exports Google Maps Bing Maps OSM TMS etc to allow specifying a custom tile naming scheme including with hexadecimal formatted rows and columns using x_hex and y_hex in the names Updated web exports Google Maps Bing Maps where JPG is used for most tiles and PNG for any transparent tiles to save the forced PNG tiles with a jpg extension so that the generated HTML will still display everything Updated web exports OSM TMS Google Bing to discard any edge tiles that have less than one half pixel of overlap with the output rectangle Updated Geographix CDF import export to support rotated labels and automatically place line labels along the line at an appropriate location Added additional producer codes for CADRG CIB exports Added option to DWG export to control whether or not 2D lines with a single elevation like contour lines are saved as 3D lines or 2D lines with an elevation Added support for LogASCII well files with the lat lon stored in a
155. d slow exports due to having a huge number of files in a single folder When adding a custom tile source OSM TMS Google Maps there is now a button to select a local folder as the base Selecting that automatically sets up the Base URL with the lt file gt prefix Added support for custom tiled sources with only a single zoom level so there is just a x and y but no z in the custom tile filename definition Sped up access to local file based tile sources by directly accessing the tiles in their specified location rather than copying to our local cache Added support for WCS sources that use wes prefixes in their tags Added support for customizing the user agent string provided with web requests Add a registry string value named WebUserAgent in HKEY CURRENT _USER Software Global Mapper to have that used rather than the automatically generated user agent string Added support for loading WFS services that don t specify a bounding box for the data in the WES capabilities XML document e Format Specific Changes O Added option to Shapefile export to allow selecting the code page language to export All exported attributes and other text will be converted from the specified language for the layer to the selected output language If you export to UTF 8 a cpg file is also created with the export specifying that the text is encoded with UTF 8 Greatly sped up handling of Shapefiles with large numbers of attributes both fo
156. d support for loading new ECW v3 format Added support for loading Field Survey XML files from Trimble devices Added support for loading GML files from the Finnish Land Survey Added support for loading Kongsberg SIS plan format files Added support for loading text file listing location and bounding box of OSM tile images in format of filename and 4 bounding box columns in lat lon e Lidar Changes O LIDAR MODULE ONLY Added additional selection option on path profile dialog with Lidar points shown to select by drawing a polygon LIDAR MODULE ONLY Added support for loading Leica PTS point cloud files LIDAR MODULE ONLY Added option when batch converting to Lidar LAS LAZ files to apply color from loaded imagery LIDAR MODULE ONLY Made searching by HEIGHT_ABOVE_GROUND attribute possible in vector search dialog Added built in links to online Lidar data from the USGS and other US agencies under new Lidar group in online source dialog The USGS National Lidar Dataset is linked to via EarthExplorer The bounds you specify will automatically be sent to the EarthExplorer site for easy download Made batch converting Lidar point clouds with RGB colors to new LAS LAZ files automatically include the colors in the output files Updated Digitizer Tool option to count points inside selected area features to count Lidar point cloud points Added option to render Lidar points by the point source ID In addition the point source ID is available
157. d that way on the General tab of the Configuration dialog Added option to SEGP1 export allowing elevation values to be stored with an implied decimal Updated similar color transparency specification on the Display tab of the Options dialog for raster layers to provide a slider to control how similar a color can be to the transparent color and still be treated as transparent This replaces the checkbox option to enable similar color transparency so that more control is possible Updated option to insert vertices at line intersections to allow only splitting where there are existing intersections and not inserting new vertices Added option to Alter Elevations tab of Options dialog for elevation grid layers to allow providing a power to apply when adjusting elevation values Added new option to the Options menu on the Path Profile Line of Sight dialog to allow creating point features at the minimum and maximum elevation locations along the path Added new Dot Orange built in symbol Changed the border color for red and green dots to black from white Improved grouping of Control Center right click menu options to make them easier to find and also added upper case one word descriptions to the start of some commonly used options to make them easier to spot Added option to Control Center right click menu to allow hiding all layers that don t intersect a selected area Added option to split Shapefile exports based on the description of the
158. d to have much better worldwide coverage Added free built in access to global street level maps from OpenStreetMap org via the File gt Download Online Imagery menu command Added support for exporting GeoTIFF files with 3 or more bands of data and 16 bits per band thus allowing multi spectral input files to be output without losing any information Added new Map Layout option under the Tools menu and on some right click menus to allow more control over the display of the elevation legend and distance scale as well as new support for adding margins and a north arrow to your map display exports Added real time display of current cursor information location distance elevation to 3D Path Profile dialog In addition you can now also click to define a sub path on the 3D Path Profile dialog and get information about that sub path displayed Added ability to easily create symbols from common shapes like dots squares diamonds and stars of a user selected size and color anywhere that a point symbol can be selected Added ability to add custom point symbols from PNG GIF and JPG images in addition to the current support for BMP and ICO files This includes support for translucent symbols by using PNG files with an alpha channel for transparency Added ability to add custom point symbols from vector format files including EMF DXF and Global Mapper symbol gm_sym files which are just ASCII XYZ files Added support for scaling point symb
159. d values for imagery formats like TIFF BIL BSQ Erdas Imagine etc Added support for loading vector data from PCI Geomatics pix files Added support for loading GeoTIFF images with an 8 bit palette and 8 bit alpha channel that are stored separately Made Zoomify exports create hotspots xml file for use in Zoomify GeoViewer Added support for rotated Geosoft Grid files e Digitizer Tool Changes O O Added new option to Advanced Feature Creation submenu to create a coverage area concave hull for loaded or selected point features This allows you to easily get the coverage for an irregularly shaped grouping of points like in a Lidar data set Added new option to create square areas of a fixed area on the ground in the Create Area Polygon Feature submenu This will show the area square as part of the cursor until you place it You are prompted to enter the area on the ground each square template should cover Added new option to Advanced Feature Creation submenu to create a line skeleton from area features Added new option when a picture point like JPEG with EXIF data is selected allowing you to place the picture on the map You can use this to draw a box where you want the image drawn on the map and it will be placed there Updated option to combine line features to prompt for an allowed threshold between the lines allowing connecting lines that don t quite exactly connect When combining selected line features add option t
160. data as a built in online source This provides sea marks buoys etc as an overlay layer to draw on top of an already loaded layer like base OpenStreetMaps data or an imagery layer Fixed issue with some WMS sources not listing all available projections that are defined in the capabilities document if said document didn t also list a bounding box for that projection Fixed issues with tiled OSM TMS Google Maps sources with a followed by extra parameters in the base URL not saving properly to workspace files e Format Specific Changes O Updatd DXF DWG import to set the default view to the extents specified in the file rather than just showing everything This eliminates the default view of a bunch of extra stuff and not the core data Added additional options to DWG DXF export for choosing what information about a feature to create the layer name from i e description type name layer name etc Greatly improved display of text loaded from DWG DXF files including getting font names and proper alignment in many cases Fixed problems with some extruded features being improperly positioned when reading from DXF DWG files This is a very old problem that is finally fixed Made 3D Tin Face areas loaded from DXF DWG files use the brush style for the type from the Area Styles tab of the Configuration dialog rather than always filling the TIN areas Dramatically improved the rendering and load of CityGML files Improved handling of n
161. dded new Combine Compare Terrain Layers option to keep the first layer value only if the second layer value is invalid This is used to cut one or more terrain layers from a terrain layer Added option to view shed calculation when using a range of angles and a height to check to allow specifying whether the height to check is relative to sea level or ground When generated contours from terrain automatically apply the default attribute list for iso height areas to any created contour areas When generated contours and marking closed contours less than some length as deleted also mark contour areas as deleted that don t meet the length requirements Improved accuracy of volume results when the current projection is highly O distorted in the area of interest like if Mercator is selected and you are not near the equator Made the maximum depression fill depth setting be remembered between runs of the watershed and find ridge lines tools Fixed bug with pile area volume reports being incorrect for pile bases that are sloped A single elevation was being chosen Fixed bug in v15 1 0 v15 1 1 with the saving of the TIN layer when generating a grid from vector layers not working Fixed bug in v15 1 0 v15 1 4 with flattening of areas during gridding where the area edges are shared with others of different heights not actually making the areas flat even though they have a single elevation Fixed problem with creation of equal value areas from f
162. dded support for cropping Polish MP exports to a selected area feature Note that this will only crop point features to the selected area feature Exported area and line features will only be cropped to the bounding box of the selected area Fixed storage of contour line elevations to Polish MP files when a template file with elevation units of meters is used Made Polish MP exports using template files be done in the datum specified in the template file if the datum name is known Fixed automatic map ID generator for Polish MP exports so that valid map IDs will always be generated Made the Z level value for custom area types be stored in the custom_area_types txt file This allows the user to customize the Z ordering of custom area types to get them to draw where they want Currently this requires editing the custom_area_types txt file and editing the value in the 7th column A value of 0 will cause the type to draw below all other area features Fixed problems loading text from some DGN V8 files Fixed error when loading some DGN v8 files with raster data in them Made the last selected type be remembered on the Area Styles Line Styles and Point Styles tabs of the Configuration dialog Made the Restore Default Settings button on the General tab of the Configuration dialog also restore the vertical display settings to their default values Made alpha channels from ECW files be used Fixed conversion of offset and min max elevation values i
163. de show state be remembered for all toolbars Fixed some errors creating buffers areas area line features Made batch conversion to DWG files use the DWG version last selected on the DWG export dialog Made the last selected elevation units on the custom shader dialog be remembered Made cropping to a selected area work for CSV exports Updated the CSV export to use the selected Position Display Format settings for lat lon values exported to CSV files rather than always using decimal degrees Updated the GeoPDF import to recognize multiple map areas and bring them in as separate layers at the correct location and already cropped Updated the PNG export to remember the state of the Save Vector Data if Displayed option Fixed problems loading encrypted PDF files Corrected loading of BIL files with unsigned 16 bit elevation values Don t add CLOSED attribute from loaded ASCII files if it was just used to mark a feature as an area or line Fixed issue from v11 02 with the alpha channel from ECW files not being used Updated creating lines from areas to not copy over any default attribute values from the area to the line When copying features to the clipboard from the search results dialog maintain the order of the sort when pasting those features Fixed loss of measurement attributes when changing the classification of newly created features with the Digitizer Tool Added new Range Ring Center point type Added option to reorder maps i
164. de the dialog for drawing a box around the area to export be resizable and also allow zooming and panning the map Added support for having lines a fixed width in meters based on attribute values named WIDTH_M or LINE_WIDTH_METERS Added new GENERATE_ELEV_GRID script command to allow generating an elevation grid from loaded 3D vector data Made time stamps for each vertex in a GPS tracklog be saved if available when tracking a connected GPS device or when loading a tracklog from a GPX file Made tracklogs exported to GPX files contain time stamps if the tracklog had time information for each vertex Added new options to hide all offscreen layers and close all hidden layers to the right click popup menu in the Overlay Control Center e Projection Datum Changes O O O Added built in support for the Belge 1972 Belgian Lambert 1972 grid system Laborde Madagascar projection and Transverse Mercator South Orientated projection Added built in support for the NGO 1948 datum based on the Oslo prime meridian vs Greenwich Added built in support for the Tananarive 1925 datum based on the Paris prime meridian vs Greenwich Added decoding support for some Polar Stereographic Austrian Grid and Norwegian grid EPSG projection codes Fixed Oblique Stereographic and Dutch Grid projections they were broken in v9 00 Fixed Lambert Azimuthal Equal Area projection to work properly with all datums This fixes problems with the CORINE land co
165. ded right click option to the Control Center to allow selecting all of the features in selected layers with the Digitizer Tool Added support for configuring the band layout of files within a map catalog Allow cropping to selected areas when printing Added option to search by a feature s index in a layer when doing a search Updated the attribute based styling for layers to allow wildcards and in the attribute value strings Added Edit button to Help gt About dialog allowing you to easily change where settings files for things like custom datums ellipsoids and types styles are stored Added new option on the Specify Sample Spacing in Other Units dialog for raster and elevation exports to use the sample spacing used for the last export Added new option to view shed calculation to allow specifying a range of Fresnel zone percentage clearances to match against rather than just a minimum percent clear Made map catalogs remember the selected elevation units for vector files included in the map catalog Updated batch conversion Use Quad Names option to work for any type and to use the layer description if a quad name is not available Added option to export slope values as percent rather than degrees when exporting Float Grid files Added access to an additional zoom layer of OpenStreetMap org tiles so you can zoom in far enough to see things like house numbers now Added option to combine terrain layers using a multiplication op
166. ded to new line and area features e Fixed half pixel shift of GeoTIFF files that were forcefully positioned using a world file rather than embedded positioning information e Added new advanced selection option to the Digitizer Tool to allow selecting all line features contained within a selected area feature e Made the false easting northing values for UTM projections in units other than meters be stored correctly when saved to WKT format PRJ files e Made the list of user provided web based ECW links be stored in a text format in the user_web_files wfl file rather than a hard to edit binary format WHAT S NEW IN Global Mapper v8 03 e Added support for loading GML format files e Modified the Overlay Control Center to display a checkbox next to each layer for controlling the displayed state of the layer This replace the previous text of Displayed and Hidden used for each layer and also provides an additional mechanism to turn the layer on and off e Added new option on the Select Online Data Source to Download dialog to specify the download location as a lat lon and a radius e Added option when batch converting and exporting most raster formats to generate an ERS file for use with ERMapper e Added new menu commands to the Options menu on the Path Profile Line of Sight dialog to allow users to manually specify the range of elevation values displayed This options allows for consistent results between multiple profiles if desired
167. dering of TIFF files with overview layers when raster display options are changed from the defaults This problem was introduced in v8 02 Allow color band setup for TIFF files with just 3 color bands Fixed slowdown in rendering exporting TIFF files This was introduced in v8 02 When batch converting ADRG ASRP files to new raster formats use the name of the internal IMG file for the export results rather than the TRANSHO1 THF file which is too generic Made most of the metadata for SDTS vector layers be available on the main metadata tab for that layer to allow easy copying to the clipboard Fixed problems with translucency blending and feathering over the top of TerraServer USA data layers Fixed vertical flip of some GMT grids in netCDF format Added Projection tab to the Options dialog for raster and gridded elevation layers to allow easily changing the native projection interpretation of the coordinates for that layer This allows you to easily correct files that have the wrong projection datum used for them at load time Made the vertices of holes islands in areas be displayed when displaying area and line vertices Fixed rare problem decoding some sections of Arc Binary Grid format files Fixed error when exporting vector data to Erdas Imagine IMG files Made online data display more responsive to canceling the render with the ESC key Improved exporting of data to palette based images with multiple colors in the export palette b
168. destination directory for the new file being created if it doesn t already exist Added new GRID_NAMING_PREPEND_ZEROES parameter to the script export commands to allow controlling whether or not zeroes are prepended to named grid tiles during export Added new GRID_NAMING_SEPARATOR parameter to the script export commands to allow users to control what separator character is used between pieces of a grid name The default is an underscore Added support for appending column names before row names when gridding on export from a script by using the GRID_NAMING SEPARATE_COLS_FIRST parameter Improved resizing of main map window so that the map data is not constantly redrawn as you drag the window to a new size Increased the size of the displayed elevation on the GPS Information dialog Added option when batch converting vector data to KML KMZ files to allow the inclusion of displayed text labels for exported area and line features with labels Fixed problems reading some TIFF files larger than 2GB in size Added new shortcut key Ctrl 1 to zoom the map to the full detail for the raster elevation map at the center of the screen Fixed error when trying to export vector only data to a raster BIL file When exporting Polish MP files using an image ID from a template file and also gridding the export into multiple pieces automatically increment the image ID of the output files to prevent duplicate image ID values e Added new option to always disp
169. dialog Made the option to display selected feature measurements including combined values in the Digitizer Edit Tool work even if only line features are selected Added ability to display any custom elevation units string that you want on the elevation legend by right clicking on the legend and selecting the option to specify a custom unit string Added support for exporting to DeLorme track and waypoint formats Added support for exporting loaded area and line features to ZMap XYSegId text files Added option when generating Global Mapper Package files to store each layer in its native projection rather than in the current view projection or in lat lon WGS84 Added new option to the Vector Display tab of the Configuration dialog to always show vertices for features selected with the Digitizer Edit Tool This makes it easier to edit the vertices of area and line features without being overwhelmed by displaying all feature vertices Allowed rasterization of vector data to any size to exported image file previously you were limited by the largest bitmap that could be allocated on your system e Projection Datum Related Additions and Changes O O O Added built in support for the Wisconsin County coordinate systems Added built in support for Deir Ez Sor Egypt Gulf of Suez S 650 TL Estonia 1997 FD 1958 Herat North ISN93 Jordan Korean 1985 Korean 1995 Ocotepeque Costa Rica Reykjavik 1900 and Trinidad 1903 datums Added
170. dinate So if you have text placement files with just the corner coordinates you can easily add 0 or 100 for the X and Y pixel coordinates of each corner to get a good placement Added support for loading ANUGA Rainfall and Greenland Terrain NetCDF format files e Lidar Changes e Added a new premium Lidar add on module with advanced Lidar analysis tools You can activate the Lidar module license under the new Help menu command for managing modules and feature extensions LIDAR MODULE ONLY Added new binning methods for gridding Lidar point clouds You can now create a regular grid from the minimum maximum or average value in individual buckets This method is extremely fast compared to the normal triangulation based approach You can select which method to use on the dialog that appears when importing Lidar data LIDAR MODULE ONLY Added support for displaying and editing the classification of Lidar points in the path profile tool You can control the corridor width and select displayed Lidar points in the path and reclassify them or delete them Any Lidar points that are displayed are also considering for line of sight operations LIDAR MODULE ONLY Added support for applying colors from loaded imagery layers to loaded Lidar point clouds directly in memory This allows easily creating a fully colorized Lidar data set without having to export to a new LAS LAZ file first LIDAR MODULE ONLY Added support for automatically iden
171. ding of Lidar data sometimes not creating a layer e 3D Viewer Changes O Added option to plan and record a 3D fly through as a video file New toolbar buttons on the 3D dialog allow setting up and recording a high definition 3D fly through To create a 3D fly through you first define a fly through path from a line feature You can define the camera location and direction for every point along the path preview the fly through frame by frame or as a single stream and save the results to an AVI video file with different resolution and frame rates Support rendering textures on 3D polygons in the 3D view This allows for the creation of photo realistic 3D model views when loading 3D data that has texture images included There is a drop down on the 3D toolbar to select the Skybox O background for the 3D display Added real time display of main map display cursor location in the 3D view You can enable display of a vertical line in the 3D view that shows where your cursor is positioned in the main map view as you move it around Added support for drawing the current GPS location and recorded track in the 3D viewer There on options on the 3D View Options dialog to control the display of the GPS icon Made 3D points with rotated symbols draw at the appropriate location in space and with the specified rotation relative to the plane of the surface This allows for things like floating arrows pointing in different directions Added option on t
172. directly after lt ele gt field so that Garmin s MapSource can read those GPX files Fixed matching on empty name attribute values when using the ASSIGN_TYPES script command Allowed for placement of fixed screen layers and map layout items like scale bar and elevation legend in centimeters in addition to inches degrees and percent Made grayscale export option work properly Optimi Clutter export Sped up marking large numbers of features as deleted using the Digitizer Tool Made right click when drawing a new line in trace mode with the Digitizer Tool cancel the operation Changed shortcut key for toggling vector layers on and off from Ctrl Shift V which was already assigned for the special paste and keep function to Ctrl Alt Shift V Updated the 3D viewer so that extruded areas only extend to the terrain surface instead of well below it Fixed problems loading GXF files with lots of comments Made PDF exports maintain the proper paper size in Acrobat and other PDF readers Added support for pulling additional lt Placemark gt tags from KML files and using them as attributes for the created features like lt address gt and lt snippet gt tags Added support for creating new area and line types with line widths that are specified as a fixed width in meters Fixed assignment of point attributes to areas when the projection of the point and area features was not the same When exporting Lidar LAS files from vector point data use t
173. double precision samples Added support for batch converting to Garmin compatible KMZ files e Projection Datum Changes O O Corrected NAD83 HPGN HARN transformations that were messed up in v12 02 Made Washington Oregon HPGN HARN transformation actually work O O O O O Added support for automatically transforming vector file coordinates using a gm_xform file accompanying the data file describing the transformation This is useful for modeling things like local mine grids Updated rotation for projections to be applied relative to the false easting northing location rather than the 0 0 point Added built in support for Dealul Piscului 1933 Romania Le Pouce 1934 Mauritius NAD83 HARN North Carolina WI County Chippewa WI County Taylor and Xian 1980 datums Added support for Cape Feet Centimeters and Millimeters as linear units Made British Grid coordinates be displayed in the status bar with the 2 letter grid cell designation followed by easting and northing rather than just as decimal coordinates Make NAD83 datums write out as NAD83 rather than D North American _ 1983 to old format PRJ files to maintain compatibility with old ESRI products Corrected EPSG code for NY West Sate Plane zone to 2262 from 2261 Improved conversion parameters for ED50 Turkey datum Fixed cropping to polygon during EXPORT_RASTER command Improved accuracy of some State Plane projection conversions that used non unity sc
174. e Added support for working on layers that are selected in the Control Center when running a script in the context of the map main view Just specify the filename as SELECTED LAYERS and the command will operate on any layers selected in the Control Center LIDAR MODULE ONLY Added support for auto classifying ground points in Lidar points clouds in a script using new LIDAR_CLASSIFY command Added SET_OPT script command for setting general options Currently it supports setting the Position Display Format and turning the display of areas lines points and labels on and off Added new SAVE_WORKSPACE script command to allow saving a workspace from a script Added support for copying moving matching features to a new layer using the EDIT_VECTOR command You can use new COPY_TO_NEW_LAYER MOVE_TO_NEW_LAYER NEW_LAYER_NAME and NEW_LAYER_PROJ parameters to control the operation Added support for creating tapered buffers around line features with the EDIT_VECTOR script command by adding BUFFER_DIST_END or BUFFER_ATTR_END parameters to existing buffer parameters Added QUERY_LAYER_METADATA script command to allow defining a variable based on some metadata value of a loaded layer You can also do the same now with the DEFINE_VAR command using the METADATA_LAYER and METADATA_ATTR parameters Added support for referencing already loaded layers with the POLYGON_CROP_FILE and FEATHER_BLEND_POLY_FILE parameters Just specify the name of the loade
175. e ProjNatOriginLatGeoKey for the origin latitude in addition to writing it to the ProjCenterLatGeoKey Recognize Web Mercator projections from GeoTIFF files created by Esri products where it is stored in the GTCitationGeoKey Automatically detect GeoPDF files that are clearly not in Canada but specify a Canadian datum code like NAS E and make them generic NAD27 rather than NAD27 Canada Improved precision of the Mercator Navionics Special projection Improved scale bar display for Mercator projection It will now much more closely match the great circle distance even when far from the equator Added support for L2CAN83 projection code from EPSG and ERS files Increased precision of lat lon projection parameters stored in workspace files Now they will be saved to 1 100 000 of an arc second or about 0 3mm on the ground as compared to about 3cm precision before False easting northing values are now stored to the nearest 0 1mm instead of Imm e Online Source Changes O O ki Added support for multiple levels of grouping of online layers You can add gt to the group name when adding a layer to specify a sub level Allow quickly adding an entire layer tree from a WMS source If you select a layer with child layer like the top level source then you are prompted to separately add the child layers as their own source If you select to do this you will get a sub group under each selected group with the specified source name as
176. e Added support for ENVI DEM files with 32 bit integer samples e Added new right click option to Download Online Imagery Data dialog allowing you to set the maximum resolution at which to try and download data from a user added WMS source e Added new box minimum resampling methods e Added new 9x9 box average and box max resampling methods e Automatically shrink the font for the sub path text display on the path profile dialog to make sure it fits if it is too large to fit in the default font e Added option to specify stream area threshold for watershed delineation as a ground area or a fixed cell count e Added option to save the flow accumulation values for each cell to a grid layer when calculating a watershed e Updated watershed generation to add NEXT_STREAM_ID attribute to generated watershed areas where the ID of the stream that the stream for the watershed flows into is stored to facilitate determining connectivity e Updated watershed generation to add DRAIN_AREA attribute to generated streams to show the total area that drains into the stream e Update the label display for built in dot symbols to be closer to the actual dot Made numeric values be sorted numerically in vector map legend Improved text placement for some TEXT entities from DXF files Added support for SOSI files with multiple unit multiplier specifications Added support for Architectural paper sizes for PDF export Corrected rendering of fixed height symbols
177. e Feature Edit dialog Updated raster elevation export plugin architecture to add a new flag EP_Flags_ElevAndColor that allows an elevation format to also have the color callback function called for each exported sample for formats that store both elevation and color information Added display of current data download speed to export progress dialogs that are exporting data coming from online sources like WMS or DigitalGlobe imagery Fixed bug in v10 00 that prevented export to some formats from a script file Fixed bug with incorrect Z value being written out to new 3D DGN files for 3D points that have no display label Added new File menu command to the Path Profile LOS dialog to allow saving the path profile results to a CSV file with X Y elevation and distance both segment and cumulative values Added support for loading JPEG2000 files from associated TAB files Added display of target compression ratio to metadata display for ECW and JP2 format images Added support for tracking NMEA GPS devices that use IN sentences rather than GP sentences Corrected zone number used for GeoTIFF files for the Mississippi West State Plane zone Greatly sped up export to large ECW files from map catalogs Updated date fields imported from DBF files to use 4 digit years Updated Lidar LAS export from vector data to use feet for the elevation units if the Elevation Display Export Units setting on the Vertical Options tab of the Configuratio
178. e a Quiver Plot from attributes of point features to easily create directed scaled arrows or other symbols With this option you can select U and V vector attributes or Magnitude and Rotation attributes as well as a symbol to get rotated and scaled symbols typically arrows from the attributes of point features The Quiver Plot functionality is available on the Point Styles tab of the Options dialog for a point layer as well as from the Attribute or Create Point Features right click submenu of the Digitizer Tool Added option to create randomly spaced points within selected area features This option allows you to specify how many points to create inside selected areas and a minimum spacing This is useful for determining random sample locations for scientific tests among other things Added new Feature Creation Options item under right click Options menu for setting up the automatic creation of features i e no Feature Edit dialog and the handling of default attribute lists You can now set up area line and point features so that when you digitize a new feature it is automatically created and initialized with the settings of the last digitized feature of the same type rather than having to confirm the settings on the feature edit dialog for each feature Added prompt for maximum allowed separation when connecting selected points into lines This option allows you to connect larger collections of points that form separate lines rather than just
179. e appearance as it s not needed for multi level formats like those Updated row and column grid naming to allow starting on strings of more than one letters like BY Fixed issue with Control Center being impossible to find if you somehow drag it off the screen since the position is now remembered Limit field length and allowed characters in exported DBF files such as with Shapefile export to 254 characters as ESRI products can t handle the full supported 255 character length and also can t handle any special characters in DBF field names Fixed issue with Never Anti Alias Pixels option in batch conversion not being obeyed if the automatic export resampling option is enabled the default on the General tab of the Configuration dialog Fixed problems with cropping to selected areas during batch conversion and also gridding vector data like Simple ASCII Text or Lidar files as part of the conversion Fixed issues with some ntf files being recognized as NTF Grid files rather than NITF files and not loading Corrected tiny about parts in 6 million over reporting of calculated area values Corrected flight date written to Lidar LAS files to be days of year rather than days in month so it won t always be in January Display FLIGHT_DATE for Lidar LAS files in the metadata dialog for the layer Fixed issues in v13 2 that could cause some buffer areas to be created with spikes back to the original feature being buffered Added
180. e calculation when the pile boundary has some vertices outside of the terrain surface Before that could cause large spikes in volume as those vertices were treated as 0 Now they are just ignored It is still best to have all vertices on the terrain surface though Updated contour generation to create lines mark as absolute height and contour areas with extrusion disabled to improve the default 3D view Added better progress reporting to watershed operation and allow cancel when finding flow to from points lines and areas When creating Voronoi diagram extend lines to clip boundary Fixed long standing error gridding 3D vector layers with lines used as constraints for some data sets Fixed problem with points with elevations of 9999 or below not gridding Fixed error about not enough 3D points being available to grid when trying to grid 1 or 2 3D triangle TIN features Fixed problem with styling for drainage areas created from watershed calculation They were displaying with a single color rather than random colors in v15 2 e Digitizer Tool Changes O Added option to range ring creation to create radial areas as opposed to radial lines so that you can easily create pie wedges at a fixed radius Added an option to create a point feature at the centroid average of a group of selected point features This is under the Advanced Feature Creation right click menu when you have more than one point feature selected Updated option to cou
181. e layer name for a feature as the label for the feature in an automatically generated map legend Added support for coordinates in DDMMSS S and DDMM M formats when loading from generic ASCII text files Added real time display of 16 bit values from high bit depth TIFF imagery files as you move the cursor over the file Updated adding of measure attributes to 3D line features to include a LENGTH_3D attribute with the 3D length of the line if it is different than the 2D length Fixed export of overview layers to Erdas Imagine img files from map catalogs Added display of maximum slope along path to 3D path profile details Added support for fractional coordinates of form degrees numerator denominator For example to enter W94 125 you could now enter W94 1 8 Fixed fill coloring from some DGN files Added support for NetCDF files larger than 2GB in size Fixed problem from v12 00 with drawing elevation Erdas Imagine img files when zoomed out if the files have overview layers Added option when creating point features spaced at some interval along selected area line features to control whether or not a point is always added at the feature end point even if not at an exact multiple of the sampling distance Added option to not interpolate resample when batch converting to a gridded elevation format Fixed problems loading data from WMS servers that list both GET and POST methods for accessing the servers like GeoPortal Poland Lightened
182. e location from there Renamed Virtual Earth export to Bing Maps to reflect new naming by Microsoft Added support for positioning raster files with SOSI sos files Updated saving of Surfer CLR shader files to allow saving the actual elevation values rather than the standard elevation percentage values that Surfer uses This makes it easier to save and restore shader settings within Global Mapper Reduced size of built in bullseye symbol to make it less obtrusive Added option to use space separator rather than comma when batch converting to Simple ASCII Text and XYZ grid files When using the File gt Rectify Imagery menu command make the export option be unchecked by default When exporting to a raster image format check the Save Vector Data if Displayed option by default if any vector data is loaded Made SEGP1 import just ask the user to confirm the datum as the projection is already known Corrected application of color intensity when feather blending Improved bearing calculations in Global Mapper to use the Vincenty formula Made attribute values with multiple leading zeroes be treated as text fields rather than numeric when exported to DBF Shapefiles Made Global Mapper Package exports maintain the names for palette entries if they exist Fixed problem with slow terrain draws from the last release Added progress reporting when loading an archive zip or tar gz file with multiple files to load inside it Fixed bug with c
183. e not saving to MapInfo and Shapefile exports when the option is selected Fixed bug in v15 2 0 v15 2 1 with invalid symbol icon size error with some KML KMZ files Fixed bug in v15 2 0 v15 2 2 with incorrect rotation of point symbols from KML KMZ files Fixed placement of line feature labels when exporting to KML KMZ and the current projection is not already Geographic WGS84 Fixed bug in v15 2 0 v15 2 1 with alignment of multi line text labels in PDF export Fixed problem with toc xml files for ECRG format files being overwritten by a Global Mapper map catalog when closing the layer This was supposed to be fixed in v15 2 0 but wasn t really fixed until v15 2 4 Fixed text size issue with opaque backgrounds for PDF export Fixed rendering issues with some PDF files particular that use transparency Fixed issue with some layers not being listed for PDF import so you couldn t turn them off Fixed export of vector layers set to use the UTF 8 text encoding to PDF Only show a single error message for all invalid areas encountered during 3D PDF export rather than an error message for each invalid area Fixed issues loading some XTF files with bad pings Make TIFF orientation other than top left work for elevation GeoTIFF files Fixed crash with some high bit depth Erdas Imagine files with void values Fixed issue with the units coming in as US Feet rather than International Feet for ECW files that use a aux xml file for specifying the pro
184. e spacing pixel size Added support for extracting positioning information for image files from KML files This allows you to load KMZ files that contain embedded raster images Added option when creating an elevation grid when loading Lidar data formats like LAS and Terrascan files for the user to specify options such as the grid tightness whether or not to fill to the entire bounds of the data and whether or not to only consider ground shot points in the gridding process Added new option to initialize custom elevation shaders from a palette file Made the distance scale displayed on the main map view and on the path profile dialog use the currently selected distance measure units This allows display of nautical and other units on the scale Added option for fixed screen layers to force them to always be drawn on top of other layers including grid lines and user created features regardless of the layer order in the Control Center This is useful for forcing things like legends to always be display on top of other data Added new option when pasting features from the clipboard to not clear the clipboard after pasting the features shortcut key is Ctrl Shift V Added option when printing to select the area to print rather than just always using what is on screen Significantly improved the speed and reliability of accessing the Landsat7 Global Imagery Mosaic data layer through the File gt Download Online Imagery menu command Added b
185. eather blended terrain layers not using the feather blended values Fixed bug with colorization of contour area features when contours are created in feet and unit labels are not appended Fixed bug with contour generation with areas generated not obeying a custom elevation range and generating a contour outside the range Fixed problem with creation of roughness areas and equal value areas that caused some sections to erroneously be marked as islands holes in other larger areas that they were not actually inside of This could also result in cross point errors when exporting to Wasp map files Fixed bug with label of contour lines in feet being wrong if you based the contours on the minimum specified elevation rather than even contour intervals e Digitizer Tool Changes O Added support for creating buffer areas around line features with variable width from start to end You can specify different start and end buffer distances to get a buffer that tapers from one end of a line to another This is useful for things like creating slowly widening areas from stream lines from a watershed analysis Added support for created squared off feature buffers rather than just rounded ones No longer create separate rectangular buffer areas about line and area feature segments Result is now a single buffer area with squared rather than round edges Added options for creating buffers on just the right or left side of line features Added option to creat
186. eature Vertices dialog for area line features if the feature is reprojected Made Control Center position and size be remembered in workspace gmw files If you have the Control Center displayed when you save a workspace the next time you load that workspace the Control Center will automatically be displayed at the location it was when you initially saved the workspace Updated the Feature Info dialog to show the combined area of all grouped areas next to the group area count Added a new menu command on the Options gt Rectification Method submenu on the rectification dialog to control whether or not an explicitly selected method of Polynomial will switch to a 2nd degree polynomial at 6 points or not Added option in 3D view to control the step size used by the water up down toolbar buttons Updated the Full View Home button to ignore any hidden layers when zooming to the full view Added support for customizing the 3D view rotation angle based on pressing the 4 or 6 key If you add a string value HKEY CURRENT _USER Software GlobalMapper 3D_KeyRotateAngle with the number of degrees to rotate with each key press that will be used rather than the default Allowed zooming to 1 1 resolution for multiple selected layers from the right click menu on the Control Center Previously it only worked if a single raster or elevation layer was selected Fixed multi band export fill value for no data values Should be 0 or the gray value
187. eatures with the Feature Info Digitizer Tool by holding down the P key when left clicking lines by holding down the L key when left clicking and areas by holding down the A key when left clicking previously area only selection used the P key Updated option to create a new point feature at a specified location to also allow providing an elevation value Made automatic iconization of road names work for European style highway names like A B and M roads and also when you change the attribute to use for labeling rather than just at load time Added support for WMS servers that use CRS rather than SRS to specify projections in their GetCapabilities document Fixed poor performance with some TIFF files in the 64 bit version Updated gridding to area features to allow combining the export results of multiple areas that have the same attribute label being used for naming Updated WaSP map import to find areas that are holes islands in other areas Fixed 1 pixel shift of data under a translucent layer half of the time due to rounding Updated to support VPF files with no lat file when loading directly from a Iht file such as is common with UVMAP data sets Fixed issue with built in Landsat imagery data sources only getting up to 30m resolution data rather than better than 15m resolution This bug has existing since v11 00 Updated map catalog dialog to have a button allowing the modification of style settings for vect
188. ection cannot be automatically determined Added ability to directly load Ozi map files to load the referenced imagery Made the last used State Plane zone be remembered in the projection selection dialog Added a new option Mark Sides of Roads with Addressing Information to the option list at the bottom of the Vector Display tab of the Configuration dialog If checked any roads that are recognized to have addressing information available on one or both sides will have hair drawn on the side s of the line where that address information is available This option can be useful for determining the coverage of your addressing data Made the default face name used by labels in Global Mapper be stored in the registry and editable there The HKEY CURRENT _USER Software Global Mapper DefaultFaceName registry key now holds that value and can be edited via regedit to change the default face name for all labels Added support for loading some additional Moss Genio format files When using the File gt Rectify Imagery menu command made the control point list for each file automatically be initialized to the control points found in any associated gcp file When using the File gt Rectify Imagery menu command added an option to control whether or not rectified imagery is displayed in the reference view when rectifying multiple images Unchecking this can speed up the process when rectifying lots of imagery Fixed problems selecting
189. ector data or the displayed scale legend and or grid When exporting Simple ASCII text files make the GM_TYPE attribute be exported when necessary if either attribute export option is enabled rather than only when the style attributes export option is enabled e Rectification Changes O O O When rectifying imagery made snapping to nearby vector data in the Reference Map view be turned off by holding the Alt key when left clicking rather than holding down the Ctrl key This allows both snapping and zooming to a clicked location to be done by holding down the Ctrl key When rectifying imagery made left clicking in the Zoomed Image and Reference Image views drop a small red dot to visually indicate the click location In the image rectification dialog made holding down the Ctrl key increase the pan size to a half screen when panning with the edge arrow on any of the map views e Projection Datum Changes O Made PRJ files be saved if possible in the newer PRJ well known text WKT format rather than the older ESRI originated format that is no longer supported by ESRI products There is an option to use the older PRJ format if desired on the General tab of the Configuration dialog Added support for the Bipolar Oblique Conic Western Hemisphere Times Old Israeli Grid and New Israeli Grid projections Added Corrego Alegra NID New Israeli Datum OID Old Israeli Datum and QND95 Qatar as built in datums Added Clarke 1880 P
190. ed by MicroStation Added Gridding tab when generating contours to allow breaking up the contour generation into multiple smaller pieces Improved the visual appearance of gridded elevation data along the edges of the data when interpolating the visible seem is reduced or disappears altogether in some cases WHAT S NEW IN Global Mapper v7 04 Added KML KMZ export function This allows any loaded vector data to be exported to a KML KMZ format file for use in Google Earth Fixed problem on some systems that would cause the application to disappear or crash when attempting to select a new file for loading or saving This problem occurred on Windows XP SP2 systems which also had Adobe Acrobat Reader v7 installed Apparently the installation of Acrobat Reader changed some built in Windows behavior in a way that broke Global Mapper and several other applications DGN Import Export Changes o Allowed batch conversion of vector data to DGN format files o Allowed export of DGN format files from Global Mapper scripts using the EXPORT_VECTOR command o Made tag values be read in from DGN files and stored as attributes o Made point features stored as 0 dimensional lines in DGN v7 files load correctly o When exporting DGN files made the current view background color be saved as the DGN background color o When exporting DGN files made the correct unit conversion and type values be used rather than reporting all units as meters o When exportin
191. ed contour lines less than some length when using the GENERATE_CONTOURS script command by adding a MIN_CONTOUR_LEN parameter with the minimum length to keep in meters Added support for specifying the major and minor contour intervals in a script using MAJOR_MULT and MINOR_MULT parameters for the GENERATE_CONTOURS script command Added support for creating areas from lines that don t exactly connect at end points The new MAX_DIST parameter for the COMBINE_LINES command allows specifying the maximum allowed distance between end points in meters Updated GENERATE_LAYER_BOUNDS to allow providing a FILENAME parameter to specify that you only want to add the bounds for a particular layer Added support for defining a variable with DEFINE_VAR that is set from the first non empty value of an attribute of the features in a loaded layer Use VALUE_ATTR rather than VALUE for the value and optionally use FILENAME to specify which layer to check Added support for forcing the filename created with EXPORT_VECTOR to only contain lower case letters by adding MAKE FNAME LOWER YES Fix bug in v14 1 0 1 with EDIT_VECTOR not returning any results if no COMPARE_STR parameters are provided Add support for generating NITF files with D for ICORDS rather than G Use NITF_USE_DECIMAL YES to enable Added support for generating ers header files along with raster image exports by adding GEN_ERS_FILE YES to EXPORT_RASTER script commands Made FILL_GAPS option work for
192. ed location Changed the cursor used when selecting features with the Digitizer Tool to a crosshair from a pointer Added new Ctrl Shift M shortcut key to the Digitizer Tool to activate move mode Allow 2 line features that do not share a common endpoint to be combined by automatically adding a line segment connecting the 2 closest ends of the line when using the Combine Selected Line Features command in the Digitizer Tool Added display of some projection information on the Metadata tab of the metadata dialog for layers and also in the output of the EXPORT_METADATA script command Added option to the batch conversion dialog when converting raster files to disable the automatic use of contrast adjustment This is useful when you have files with more than 8 bits per color channel that look better with no contrast adjustment applied Added new PROMPT_IF_TYPE_UNKNOWN parameter for the IMPORT script command to allow disabling the type prompt when importing files for which the type could not automatically be determined Added new option to the NASA World Wind export to allow manual specification of the level 0 tile size to use Allowed use of the Delete key to delete ground control points from the rectification dialog Fixed problem loading some MapTech BSB charts with unusual projections like Polyconic Fixed problem with image rectification that would occasionally cause polynomial rectification to be used instead of triangulated even if triangul
193. ed location on the main map view This is useful for easily getting the path profile graphic displayed along with the main map for presentation purposes Fixed problems with features with HTML in their names or descriptions being exported to GPX files Added band selection support for BIL BIP and BSQ files and their derivatives Added support for additional band setups for GeoTIFF files i e 5 band 8 bit per sample files etc Fixed access violation with 16 bit tiled elevation TIFF files Allowed custom lat lon grid spacing to be specified in DD MM MMMM and DD MM SS SSSS format in addition to DDD DDDDD Make sure area features exported to KML files are closed i e first and last vertex equal so that they will draw correctly in Google Earth when extruded Improved accuracy of distance calculations Made area features exported to MatLab format files be cropped to the selected export bounds rather than just including all area features that overlap the export bounds Fixed positioning problems when batch converting files in a State Plane projection and using the datum override setting on the batch conversion dialog to change the datum Allowed layers that have been rectified to be properly stored in map catalog files e Made the custom color palette on the color selection dialog for the View gt Set Background Color menu command be remembered between runs e Made county and state boundary lines automatically be classified when imported from
194. ed new option when copying attributes from areas to areas to require that at least half of an area be covered by another area before using it to assign attributes Added option when measuring the volume of multiple selected areas to calculate a break even volume for all selected areas either as a whole or separately for each area Added option when calculating elevation statistics for selected area features to also create point features at the locations of the minimum and maximum elevations within the areas Updated option to create a regular grid of features to have separate Grid Placement options for filling a specified rectangle by providing the cell counts and calculating the cell width and height needed to fill with those counts or vice versa Added support for editing the description of features When you edit a selected feature you can now choose whether or not is uses a custom description and also edit that description When creating points at the end points of grid lines when creating a Regular Grid and the spacing is in degrees use the Position Display Format setting to format the coordinates So you can get DMS or DM formatting Made calculation of elevation slope statistics for selected line features also include the average elevation along the line as an AVG_ELEV attribute Added option to add attributes for the pixel coordinates of point features in a raster layer when point features are selected and there is raster data available
195. ed performance of raster exports from map catalogs when one or more files referenced by the map catalog are missing Added support for automatically cropping the collar of Canadian topographic maps with CanMatrix XML metadata files When exporting filled area features to DXF files write out the fill color of the area to the DXF file When exporting raster layers to Global Mapper Package files make those layers support transparency so that they will overlay properly on other layers when re loaded Made feather blended elevation layers visually feather blend better in to underlying layers rather than just smoothly blending the elevation values When loading files from workspace script and map catalog files if the file exists at the full path specified don t check for a new location relative to the metafile location When rectifying imagery allowed new control point values to be entered as lat lon coordinates regardless of the native projection of the layer Fixed problem with manually specified grid spacing being ignored when flattening areas using the Digitizer Tool Added option to World Wind export to allow generating the filenames required by the Java edition of World Wind Updated area calculations to be done in the native units for a layer rather than always be done in lat lon coordinates This can make area calculations from Global Mapper for large areas more consistent with what you see in other applications Fixed bug with fill style not bei
196. ed so that it won t be shown again Fixed out of memory errors when zoomed in really far on some MrSID files Fixed loading of E00 files with empty annotations Made deleted holes in area features not be exported to DLG O format files Added support for tracking NMEA GPS devices that use EC sentences rather than GP sentences Fixed determination of State Plane projection from Erdas Imagine img files that use a negative zone number in the header Fixed problem with STL 3D DXF mesh and 3D DXF mesh exports that would cause a one sample gap between gridded files when exported Added right click option to the Search by Attributes dialog to allow selecting all search results Made files opened by dragging them onto Global Mapper be added to the list of recently used files under the File menu When dragging multiple files onto Global Mapper to load them make the Use Selected Projection for All checkbox option work if the user is asked for a projection Added a registry key to allow overriding where temporary files like extracted archive contents and downloaded TerraServer tiles are stored If you create a HKEY_CURRENT_USER Software GlobalMapper TempDir string value with the folder that you want the temporary files to be based in that folder will be used the next time that you run Global Mapper Added option to save the elevation legend in the main view to a BMP file by right clicking on it and selecting the appropriate option
197. ed vector data on the name description or attribute values The searching allows both text and numeric comparisons in the search criteria Features can be edited and deleted directly from the search results e Added Gridding tab to most exports to allow splitting up the data into regularly spaced tiles on export if desired rather than just exporting a single file e Measure Tool Changes o Added support for calculating cut and fill volumes within area measurements and along linear measurements using the Measure Tool right click to see the Calculate Volumes option O Made the bearing from the start to the end of line features be added when creating new lines using either the Measure tool or the Digitizer tool Changed the cursor used in the Measure Tool to make it easier to perform precise measurements e Digitizer Tool Changes O O Added ability to easily create rectangular square circular elliptical circular arc and elliptical arc area and line feature using the Digitizer Tool There are additional items on the right click popup menu for drawing these shapes Added option to create concentric range rings i e circles of a given radius on the right click menu in the Digitizer Tool Added an option when editing vector features with the Digitizer Tool to add file link attributes by selecting files rather than manually typing the file names Made area features selected with the Digitizer Tool be drawn in their norma
198. eing very near each other Added BANDROWBYTES TOTALROWBYTES BANDGAPBYTES and NODATA fields to the hdr file exported for elevation BIL format exports Added support for reading lt MultiGeometry gt features from KML files Fixed problems when adding loaded map files to a map catalog when the loaded files were loaded from an archive file like a zip or tar gz Added support for loading some additional Moss Genio format files and made inp be a recognized file mask for that type of file Fixed crash when generating contour lines at only the 0 height contour Fixed problems with the global projection being reset when using the VECTOR_ONLY YES parameter for the UNLOAD_ALL script command Allowed clr palette files for BIL BIP BSQ format files to be delimited with commas tabs or semi colons in addition to spaces Added support for additional NITF format imagery files such as those using JPG compression e Added support for reading vector features from KML files that use a Schema directive to change the name of Placemarks e Improved the name displayed for Arc Vector Coverage layers in the Overlay Control Center e Make default export elevation units for DEM and Global Mapper Grid exports be decimeters if metric units are the default so that the full precision of nearly all data sets will be preserved by default e Added option to save custom shaders to Surfer CLR format files when editing them When coupled with the current ability to
199. eiver height values relative to sea level rather than ground via selected point attributes named OFFSETA_MSL and OFFSETB_ MSL You can also add ft to the end of the height values to specify the heights in feet rather than meters Updated Gridding tab for exporting to allow specifying overlap as a number of pixels samples in addition to percent of cell size Fixed crash when interrupting the draw of some TIFF files i e zooming and or panning fast around the data Fixed bug with modifications to vector features not being read from workspaces if the layer also used custom area line or point style setups for the layer Made areas exported to WaSP map files always be clockwise in orientation Added option to CSV export to control whether or not lat lon coordinate values are formatted according to the Position Display Format settings or just use raw numbers Updated option to create points at elevation grid cell centers in the Control Center to allow generating points only for a portion of the selected layer s When creating new unclassified features or moving unclassified features to a new layer with a default type set automatically change the type to the default type area line or point for the layer of the feature Updated Google Maps HTML export to use v3 of the Google Maps API Updated the area elevation statistics calculation to include the aspect what direction the area faces if it faces most one cardinal direction Made Lowra
200. el projection as a built in projection o Added built in support for the BD72 Belgium 1972 M Poraloko Gabon and Google Maps datums o Improved the accuracy of the ED50 Spain and Portugal datum transformation by having it use a NTv2 transformation file o Improved the accuracy of the MGI Austria and Potsdam DHDN datum transformations o Added Indian Yard as an available unit for projections o Allowed EPSG datum codes to be used to specify a datum on the projection selection dialog using the Init From EPSG button o Added support for decoding Polyconic American projections from OziExplorer map files Made the map chart type for CADRG maps i e TPC ONC etc be included in the layer description and metadata for those maps Fixed problem with elevation override data not being applied to elevation WMS layers like SRTM and NED loaded from a script or workspace file Made the Vertical Units control actually work when combining terrain layers Made the addition operation work when combining terrain layers in areas where only one of the two input layers has a valid elevation Made Surfer CLR files saved from the custom shader dialog actually be compatible with Surfer Added support for correctly importing line and point features in Polish MP format files that have multiple DataO coordinate records Added option to PNG export options dialog to easily specify the sample spacing in units other than the current export projection units Improv
201. elected favorite can be run by pressing a button or using the Ctrl Enter shortcut key You can also setup custom keyboard shortcuts for any favorite item Reorganized Digitizer Tool right click menu greatly reducing the size of the popup menu and making it much easier to find items Updated the toolbar buttons for creating new features to be active even if the Digitizer Edit Tool is not active If you select one of those options the tool will automatically activate When using the File gt Unload All menu command reset the tool to the Zoom Tool if the Digitizer Tool is active so that the projection can also be reset and avoid confusion when the next file is loaded Added option when rotating and scaling features to use the mouse to interactively rotate the features rather than specifying a specific rotation angle Added option to create a series of new line spaced along selected line area features that are perpendicular to the selected feature Added option to assign attributes to selected point features from loaded line features Updated the option to assign address attributes to selected point features to also add an ADDR_SIDE attribute with which side of the line the point is on Updated options to assign attributes between features to choose which attribute s to copy Updated Undo option Ctrl 2 to allow un doing the last deletion of one or more features new in v14 0 1 Added option when selecting all areas that connect to a selected
202. en this is done the user will now be prompted to recalculate the view shed at the new location if they want Added option to lock the current active workspace file while you are working with it to prevent other users from opening and using that same workspace file This is useful in network environments where you don t want one persons work to accidentally overwrite another s This option is in the Advanced section of the General Options tab of the Configuration dialog Added option to have cells from DGN v8 and later files to be imported as point features at the cell s origin rather than be exploded into the features referenced by the cell This option is in the Advanced section of the General Options tab of the Configuration dialog Added option to have the color number for lines from DGN v8 and later files to be add to the feature description text in addition to the level number This option is in the Advanced section of the General Options tab of the Configuration dialog Added option to generate world files and PRJ files during Terragen terrain export Added support for getting depth values from a connected GPS device that embeds STDBT or IIDBT NMEA sentences containing the depth values For GPS devices that provide depth the depth will be used as the Z coordinate for track logs rather than the elevation value Added option to Options menu on rectification dialog to automatically add control points at the image corners Fixed creation of attri
203. enter to allow easily selecting closing or hiding showing that group Added new right click option to the Digitizer Tool for creating a regular grid of areas anchored at some point and of user specified size rotation angle and naming Added ability to export BIL BIP BSQ and JPEG2000 raster files with multiple bands of data at 8 16 or 32 bit depth similar to what was possible before for GeoTIFF exports Added option to use halo fonts for text display Halo fonts display a thin border around text of a slightly different color making the text visible on any background The new Halo style is available on the font selection dialog when editing the label font for feature types or individual feature styles Updated the export interface to replace the long sub menus with dialogs allowing format selection to prevent overflowing the export format lists off of the screen Updated the map legend display based on vector types to allow labeling each style in the legend by the feature type name or any attribute value in addition to the feature description which is what was always used before Added new EDIT_VECTOR script command replacing the ASSIGN_TYPES command to allow adding updating feature attributes values and display labels reclassifying features rotating scaling offsetting feature coordinates connecting islands of areas to the main parent deleting duplicate features or marking features as deleted by searching loaded features for ma
204. enu greatly reducing the size of the popup menu and making it much easier to find items o Updated the Quick Start buttons displayed at startup removing the Find Data O Online option and replacing the Manage Loaded Data Control Center button with one to Open Sample Data that is included with the installer The new button also still opens the Control Center Added support for adding WFS Web Feature Services online data sources for dynamically loading online vector data sources Added support for adding WMTS tiled WMS online data sources Improved display of online sources at some display scales and also use less imagery for some DigitalGlobe exports Added button on DigitalGlobe client ID specification dialog to allow easily estimating how much premium DigitalGlobe imagery that you would need to purchase for a particular export size and resolution Also show coverage for each DigitalGlobe source as you highlight it in the source list Update search dialog to allow selecting a specific set of layers to search in e Global Energy Mapper Only Features O O Added option to Digitizer Tool to create a flattened site plan that smoothly transitions a set of areas into the surrounding terrain with an allowed slope and optional benches terraces This tool can also calculate the optimal flatten height such that the cut and fill volumes are approximately equal i e no haul in or out of dirt required Added option to rotate a shape featu
205. er of recently opened files that are remembered on the File menu from 4 to 6 Made the Search gt Search by Attributes dialog always display the current number of selected items Added option to feather blend to the outside of a polygonal boundary rather than to the inside Added option to generate ERS files when doing elevation format BIL exports Allowed cropping a raster layer to multiple selected polygons when using the Cropping tab on the options dialog for the layer Fixed error reading some MapInfo MIF MID format files Added support for jgwx as a JPG world file extension Made the dialog displayed when editing multiple features at the same time be resizable Updated the create flatten terrain from areas option of the Digitizer Tool when treating the area elevations as relative to the ground perform the relative adjustment of the terrain at each sample location within the area rather than picking a single representative elevation for the entire area This is useful for adjust all elevation values within an area feature by some amount When loading files that have contrast adjustment automatically applied make them use a shared contrast adjustment by default This makes loading multiple high color i e 16 bit per color channel files adjust them consistently automatically rather than doing a separate adjustment for each image e Added new right click option to the Control Center to allow easily setting the current view export projecti
206. er than always exporting all grid lines Updated PDF export using the source filename layer description for the PDF layer name to prepend the group name assigned to the parent layer for a feature to the layer name in the PDF file Added option to Gridding tab of export dialogs to control whether or not the row column name is pre filled with A characters to make them all the same length Made batch convert from Lidar LAS to new Lidar LAS point files keep the LAS version the same in the header of the new files even if the files didn t need to be as high of a version as they were Fixed error in v13 1 when loading some types of files with non English letters in the filename Remember the quality target compression and simplification settings for each batch conversion operation Made option to skip files with unknown projections during batch conversion also skip those with no known position information at all rather than using a default location e Fixed error in v13 1 that caused no data to be loaded from Lidar LAS LAZ when saving to a workspace and reloading or placing in a map catalog e Fixed bug in v13 1 where the DPI was not being saved for GeoTIFF exports e Fixed error about not being able to create file when doing a gridded export and creating folders for each row or column if reversed e Updated feature vertex dialog to spread vertex elevations just between the 2 selected vertices rather than between beginning and end if 2 non
207. er than inside a default folder Sped up load of large GeoTIFF DEM files that have an aux xml file with the valid min max elevation range Fixed handling of attributes for generic ASCII text files when breaking new features on the change in the value in a particular column Before the first line of attributes from the next feature could be added to a feature In addition attributes with different values were added as separate attributes rather than combined in one Support file versions up to 1155 for CADRG exports when exporting through the user interface Previously anything over 33 was not allowed Loading a workspace with data loaded from a spatial database now automatically selects the database table rather than prompting user Automatically decode Equirectangular projections and more Mars datums from PDS format files Fixed bug in v15 2 0 v15 2 3 with manual rectification of TIFF files with the File gt Rectify Imagery menu command not doing anything Fixed problems in BSB export with position fields in v15 2 0 v15 2 2 Fixed problems loading some BAG files such as those from the Canadian Hydrographic Service Fixed grayscale BMP export to create an 8 bit BMP file rather than 24 bit with gray colors O O O O O O O Fixed issue with images from ECRG files loaded from a zip file not displaying Fixed crash in RasterOverlay cpp when enabling contrast adjustment for ECRG files Fixed bug in v15 2 0 v15 2 1 with layer attribut
208. eration Added new option to convert area features with separate islands into a single parent area with all of the islands connected through a single vertex list with stock arcs This is useful for software that cannot handle areas with islands The option is in the Advanced Feature Creation submenu of the right click menu of the Digitizer Tool when at least one area with islands is selected Added option to split DTED exports into folders by the western longitude of the exported tiles For example a tile having a southwest corner of W90 and N35 would be stored in your selected path plus WO90 N35 dt0 Added new blend mode Color to Grayscale that allows viewing any color raster imagery layer in grayscale Added support for displaying information about clicked features from loaded WMS servers using the Feature Info tool Increased the number of remembered recently used files from 6 to 9 Added option to select areas that are only partially contained within an area when using the Advanced Feature Selection submenu option to Select Areas that are Contained Within Other Areas using the Digitizer Tool Updated CSV export to maintain the original attribute order if all features being exported have the same set of attributes in the same order Updated CSV export to include options controlling whether or not the LAYER and SYMBOL fields are exported for each point Added new right click menu option to the Digitizer Tool to allow counting the l
209. eration to specify how many sample cells will be in each radius and what area units to report using Added Automatic option for DPI on PDF export This will automatically use a DPI that causes the full resolution of the most detailed raster layer involved in the export to be maintained if possible Updated 3D viewer so that arrow keys and page up down will pan and zoom the map in non walk mode and the numeric keypad 8 and 2 keys will control the tilt Also holding down Shift with the arrow keys and page up down will get faster movement Improved automatic placement of point labels when they cannot be placed to the top right of points without colliding with another label Now more locations than just the bottom left will be checked to see if they fit there Added support for tracking multiple GPS devices using PCDLI InStar GPS NMEA sentences and SubSea GID and HID NMEA sentences Added option to add time stamp attributes to features when creating editing them Allow much larger view shed calculations as the tables for calculation can spill to disk rather than having to be in memory Added option to view shed calculation to save the signal strength after free space path loss at each visible location to a separate grid layer that can then be operated on like any other grid layer Added progress reporting to view shed calculation when applying vector obstructions Updated view shed calculation to automatically replace no data
210. ere you have multiple returns often vegetation o Added quality slider to the Lidar display options tab of the Options dialog for point cloud layers allowing control of display quality i e what fraction of points are drawn vs display speed o Added option when loading Lidar files to specify how often to sample points when using preview mode O Added option when loading Lidar files to automatically mark any points outside some number of standard deviations from the mean as deleted This allows easily getting rid of outlier noise points Added option to Lidar load options dialog to load the elevation values as depth resulting in negative elevations Improved load as ASCII like xyzi files to allow selecting the Lidar classification to assign to the points Updated creation of points from the grid cell centers of a loaded terrain layer to create a point cloud rather than a series of full point features resulting in vastly less memory usage and much greater performance Added report of point density samples per square meter to the metadata report for Lidar point cloud layers Sped up the initial display of the search dialog when searching on Lidar point cloud data Updated batch conversion of Lidar LAS LAZ files to GMP Global Mapper Package files to allow storing as point clouds or grids since GMP files can store the data either way Added support for exporting point clouds to DXF and DWG format files Fixed issue in v14 1 0 lo
211. eric column or row names in order to make them all the same length Added option to save a gridded file of slope values rather than elevations when exporting to a Float Grid format Corrected text encoding recorded in exported KML KMZ files to ISO 8859 1 rather than UTF 8 Added option when exporting to KML KMZ format files to fake an elevation for 2D area features in order to get the same draw order in Google Earth as you see in Global Mapper When gridding an export that is also cropped to a selected area feature don t create files to any grid cells that don t intersect the selected area feature When exporting Shapefiles remove any duplicate vertices from the exported lines Added option when exporting GeoTIFF files to generate PRJ files for the GeoTIFF files Added option when exporting 3D DXF Face files to generate the coordinates as ECEF earth centered earth fixed rather than in whatever projection system is selected use EXPORT_ECEF YES parameter for EXPORT_ELEVATION command in scripting language to script this behavior Added option when batch converting to DGN format to control whether or not 3D DGN files are created O Fixed problems saving some Lambert Conformal Conic based projections to ECW files In the v7 04 release a bug was introduced which would cause some projections to not have a projection string written to a newly created ECW file Made transparency when exporting PNG files work when including either loaded v
212. ers much more of the world o Added new STM1987 DNAG datum for use with Geological Maps of North America o Added NTv2 grid shift file for Croatia HDKS Grid datum o Corrected Origin Latitude and False Northing for Gauss Krueger Argentina definitions o Corrected the Carthage datum to use the Clarke 1880 IGN ellipsoid rather than Clarke 1880 o Improved accuracy of distance calculations when one or both of the line endpoints is within a few meters of the North or South Pole e Added Cropping tab to Options dialog for elevation layers so you can directly crop elevation layers without having to export first e Significantly sped up exports cropped to area features in many cases e Added support for editing the type and labeling options for vector layers in a map catalog e Added option to specify the number of digits of precision to include when exporting to Simple ASCII Text files so that you can override the defaults e Added support for scaling any point symbol added on the Point Styles tab of the Options dialog for a layer including interpolating the scale factor for attribute based styles with the same symbol when based on numeric attribute values e Allow double clicking on a control point in any of the map displays on the image rectification dialog to select that control point in the list at the bottom of the dialog e Allow selecting multiple control points at once on the image rectification dialog e Made the default attribute
213. es for type assignment if type assignment based on folder names doesn t find a matching type Added support for specifying the Image ID to use when exporting a Polish MP file Updated Polish MP exports to use EndLevel rather than Levels and POLYLINE and POLYGON sections rather than RGN40 and RGN80 Made Polish MP export report any literal types that are exported which may cause problems in cGPS Mapper Added area and line vertex count to metadata for layers Added support for gpxx Depth and gpxx Temperature attributes when importing GPX files Significantly sped up exports to extremely large ECW multi GB files that had previously slowed to a crawl in some cases Updated behavior of path profile generation along multi segment paths to not always stop at vertices when generating a path with a user specified fixed interval Now that interval will be obeyed so the user will get the exact spacing that they requested Added option to generate 24 bit PNG files when exporting to WorldWind tiles Made fat road line styles and zoom level based type filtering work properly when exporting to formats with multiple zoom resolutions like Google Maps Made the Add New Attribute option when editing one or more features remember the last added attribute to simplify adding the same attribute to lots of features Added display of bounding box for area and line features to the Geometry section of the Feature Info dialog for those features when selecte
214. es not explicitly specify that EPSG 4326 is supported and there is another recognized projection available Fixed issues loading some DGN files particularly in the 64 bit version Make sure that point features created from area centroids are always inside the area feature that they are created from Updated package export to store elevation values with centimeter rather than decimeter precision This results in slightly larger GMP files but higher precision Updated Shapefile export to not mark fields with all empty values as numeric by default but instead as character fields unless the field came from a loaded layer that explicitly marked the field as numeric Updated vector KML KMZ export to allow loading an HTML description from a file Fixed problems with holes in areas not always coming in properly from MapInfo MIF MID files Fixed issues loading directories of files from non Windows servers like SUSE Fixed export of elevation values to DXF files for 3D TIN face area features Corrected PDF export to scale when using margin units of centimeters Fixed issue with labels not exporting to MapInfo MIF MID or TAB MAP files Fixed issues with PDF files losing or having incorrect rectification when reloaded from a workspace Made gridding vector exports to selected areas support cropping the export to the actual boundary of each selected area rather than just to the bounding box of the area Made creation of distance bearing COGO lines cre
215. exporting labels longer than 31 characters Added option to Polish MP export to save out all feature attributes and not just those defined by the MP format Made OSM export use lower case text for all attribute names Fixed crash when inserting vertex along closing leg of area feature Fixed grid line placement when margins are present on Map Layout dialog Do a little bit smarter address search when no ADDRESS field is found in file to geo code but other fields are Allow specification of new elevation values on feature vertex dialog with comma for decimal place rather than period Added CLOSED_CONTOUR attribute to automatically generated contour lines that are closed Added ELEVATION attribute to automatically generated contours so the elevation is available as an attribute as well as the display label Added support for using LZW or Deflate compression on elevation GeoTIFF files Added new option to the Advanced section of the General tab of the Configuration dialog to disable the prompt to skip loading files that are already loaded Added new option to the slope direction shader to allow providing an offset angle to allow for checking alignment against angles other than cardinal directions Fixed problems with attribute names with accent characters not working to add display labels from in some cases Fixed error loading NITF files with JPEG2000 encoding over 2GB in size Improved reading of SHP files with no SHX file e Fixed iss
216. f spaces or semi colons as separators write the ELEV field first and to allow using commas for decimals rather than periods i e European style Add progress reporting for load of XML based formats like KML GML GMC OSM XML including the ability to cancel the load Updated the GeoPDF import to have a Use for All option when importing PDF files with layers If you check that all PDF files in that load operation will disable the same layers automatically without showing the prompt The next load operation won t automatically select them but will uncheck those layers by default and show the layer dialog Added support for loading more PDF files directly from zip files Added advanced support for overriding the DPI that PDF files are loaded at so you can achieve better display on some systems You can now create a DWORD value in the registry at HKEY CURRENT USER Software GlobalMapper named PDF RENDER DPI with the value set to want you use for the DPI For example try 1200 for a very high resolution render Note this will take more memory and load more slowly and might fail and use a lower resolution anyway Fixed issue with raster PDF exports being less sharp than the originals Fixed issue with PDF export of translucent filled areas with holes islands also making the border of the area translucent Fixed issue with CIB exports that caused them to get significantly darker and also to be slightly mis aligned with where standard
217. faultVectorSearchStr The default value is e Made it possible to batch rectify ECW and JPEG2000 format files using the File gt Rectify Imagery menu command e Made LiDAR LAS export write out the point count for each number of returns in the header e Made LiDAR LAS support reading and writing projection information e Added an Invert Selection option to the popup menu when you right click on the search results list on the Search by Attributes dialog e Made the Add Update Feature Measures option in the Digitizer Tool report the combined length of all selected line features and the combined enclosed area of all selected area features at the end of the operation e Added new Deleted Line and Selected Line line classifications so that users could modify the drawing style used for deleted and selected line features e Fixed saving of Lambert Conformal Conic projections to MapInfo MIF MID files this was broken in v9 00 e Updated elevation legend to only display the valid range for visible gridded elevation files WHAT S NEW IN Global Mapper v9 00 e Significant New Features o Added direct access to high resolution Digital Globe GlobeXplorer and AirPhotoUSA imagery for the entire world through the File gt Download Online Imagery menu command Free access is provided to watermarked imagery for reference only with access to un watermarked imagery that can be exported to new files can be purchased o Added support for exp
218. files Added support for loading very large 16 bit BMP files Corrected color display in the status bar as you move the cursor around the map over loaded TIFF files Added support for user specified tile size when generating KML super overlays Made the last palette selection be remembered for batch conversions Added support for additional flavors of MODIS data in HDF format like the SST sea surface temperature data Fixed problem with some new line styles from v10 00 not drawing properly when used as area borders Corrected rotation of text labels from some DXF files Fixed problem with multiple consecutive spaces being reduced to a single space when reading in attributes from ASCII text files Made the text n be interpreted as a newline character in attribute values read from ASCII text files Added LEVEL_DESC attribute to features imported from DGN v8 and later files if the file contains a text description for the level of the feature Fixed problem with translucency setting not always working with TIFF files in map catalogs Added ability to use custom palettes when exporting GeoTIFF PNG or Erdas Imagine files from scripts by providing the palette filename as the value of the PALETTE parameter like PALETTE C my_palette pal e Greatly sped up the addition of JPG files to map catalogs e Made NAME and LABEL fields be preferred for labeling over fields that just start with NAME or LABEL when loading Shapefiles e Added su
219. files that don t use the top left coordinate as their reference point Fixed problems exporting attributes with special characters like and in their name to MapInfo MIF MID format files Added support for loading ERS files with missing cell sizes These are apparently defined as having a cell size of 1 0 Made the last exported bounds be available between runs of Global Mapper Added an option to the Advanced section of the General tab of the Configuration dialog to make the full path to files be displayed in the Overlay Control Center for layers that do not have any description other than the filename Allowed selection of which bands are used from multi spectral FAST L7A Landsat imagery layers Added support for loading 16 color 4 bit per pixel PCX files Made holding down the P key when selecting a new location in the Reference View of the rectification dialog or when using the Measure or Digitizer Tools cause the new location to be snapped to the nearby point features Made the default attribute list for a feature type be applied when changing the classification of an existing feature through the single feature edit dialog Fixed problem with missing start row and column of DTED tiles in some cases when exporting to DTED format When cropping to selected area features during a batch conversion operation made the bounds of the exported data also be cropped to the selected area features Added support for loading Ozi map files wit
220. finition azimuth should be 90 instead of 0 o Made longitude meridian parameters be displayed and entered relative to the prime meridian associated with the selected datum rather than always relative to Greenwich e Allowed cropping DWG DXF and several other exports to a selected crop area e Added right click option to 3D path profile dialog to create a new point feature at the current cursor location e Made 3D path profile CSV export include slope value for each segment e Added Vertices button to feature edit dialog when editing an existing line or area allowing you to edit the vertices for that feature e Greatly improved appearance of most loaded EMF files by making them come is as a raster layer rather than a vectorized one e Added new button to the view shed options dialog to allow having ground relative transmitter and receiver heights calculated based on just a subset of the loaded elevation layers This is useful if for example you have a layer with the bare ground elevations then another gridded elevation layer that includes buildings that you want to use for line of sight purposes With this new option you can choose to have the transmitter and receiver heights relative to the bare ground layer e Added display of calculated scatter angle for the active line of sight when showing path details for the path profile LOS e When moving one or more line and or area features with the Digitizer Tool and a single vertex on those featu
221. for a number of things in particular counting how many view shed layers overlap at any particular location Automatically mark any closed contour lines that are simplified into a stick i e first and last point the same with one other unique point as deleted Added option to specify the size of the allowed elevation or slope change when simplifying 3D lines Allow calculation of volumes within areas at a fixed height relative to the ground surface at each vertex rather than only at a fixed height relative to sea level Updated option to Measure Volume Between Surfaces for selected areas to add the calculated volume values to the areas as attributes Changed roughness for oceans to 0 0003 in built in roughness tables from 0 03 as that is more in agreement with common usage Automatically skip loaded terrain layers that are outside a custom elevation range for contour generation to speed up the operation in some cases Updated reported Total Volume for area pile volumes to be the cut volume minus the fill volume rather than adding them together Updated Combine Compare Terrain Layers dialog to only show a single list of layers to select from for those operations that work on multiple layers in a single list like Add Average Maximum Minimum and the new Count Layers Added new Combine Compare Terrain Layers option to count layers with valid samples This option will create a grid with the count of valid overlapping layers at each location A
222. for exporting BIL terrain files as part of WorldWind export to generate new terrain data sets for use in WorldWind Added support for exporting area features to SMT Kingdom Polygon files Added support for loading GML files directly from gz archives Added support for loading QGIS and CLR palettes Added support for exporting data to multi band and high bit depth NITF files Added support for exporting terrain data to NITF format files e Projection Datum Changes O Added built in Minnesota County datum with pre built zones for each special Minnesota projection Added built in 3TM Alberta Croatia TM Gauss Krueger Croatia Trinidad Grid and Universal Polar Stereographic North and South Zone projections Added Krasovsky 1940 Ellipsoid NAD27 Michigan for Lambert Michigan State Plane zones only Potsdam 1983 Tete Mozambique and VN 2000 Vietnam datums Added Clarke 1866 Michigan as built in ellipsoid Added Kilometers Chains Benoit and Chains Sears as built in units Improved storage and retrieval of datums with non Greenwich meridians from WKT format PRJ files Added option to generate ESRI aux xml projection files for most raster exports and when batch converting Made false easting northing work for Bonne projection Made South American 1969 datum automatically use SAD 1969 Brazil specialization if the location being converted is in Brazil Updated American Samoa 1962 datum conversion to use NADCON con
223. from an existing selected point feature Updated option to add attributes to areas from points in that area to append values of attribute already exist to the new value for the area comma separated rather than just using the first value encountered When drawing new features by snapping to existing 3D line or area features use the elevation from the snapped to feature even if not snapping to a vertex Corrected issues with the bearings and orientations of arc areas and line features including making manually drawn arcs use projection independent bearings by default rather than Cartesian bearings e Scripting Changes O O Added new JOIN_TABLE command to allow joining an attribute table to a loaded layer Added support for overriding the default resampling done during export by explicitly providing a SAMPLING_METHOD parameter with the sampling method to use Added support for exporting NITF format files using the EXPORT_ELEVATION and EXPORT_RASTER script commands Made the SIMPLIFICATION option for the EDIT_VECTOR script command also simplify area features Added option to include style attributes when exporting to Shapefile using the EXPORT_VECTOR script command by adding an INC_STYLE_ATTRS YES parameter Updated DEFINE_VAR command to support having a REPLACE_STR parameter to replace some part of the variable value with some other text This is useful inside of directory loops for replacing some part of an existing variable with so
224. g 3D features only require half of the clicked locations to have valid elevations before creating a new 3D feature Any vertices with unknown elevations will be filled in from the adjacent elevation values Added new option under Crop Combine Split submenu to chop up selected area features until they have less than some vertex count Add new right click options under the Vertex menu to move the vertex selection to the next or previous vertex This is available when a single vertex is selected in a line or area Made the measure attributes for areas in a group of areas include a GROUP_AREA attribute that is the combined enclosed area of all areas in the O grouping Added option when creating buffer areas from 3D areas and lines to add a Z offset to the buffer areas so you can stack them Updated option to add coordinate attributes to selected features to also work for line features The start and end point coordinates will be saved in START_X START_Y END_X and END _Y attributes When calculating elevation statistics for selected lines add a LENGTH_3D attribute for the length of the line along the surface Also prompt if any 3D lines are encountered to see if the existing per vertex elevations should be used or if samples along the line path from the terrain should be used Added option to customize the drawing style used when creating range rings Fixed bug that would cause areas that failed to combine with errors to be marked as deleted
225. g DGN files made the level number used for exported features that originally came from a DGN file be maintained o When exporting DGN files made text features be exported for line and area features that have labels o When exporting DGN files made text labels be sized proportionally to the font size used for the label in Global Mapper The export options dialog also has an option to scale the text to make it larger or smaller and still maintain the proportionality o When exporting DGN files made generation of a 3D DGN file optional o When exporting DGN files added an option to also generate a PRJ file containing the native projection of the coordinates in the DGN file o When exporting DGN files added an option to specify the unit resolution to use such as 100 to use centimeters when the export ground units are meters Allowed saving of the 3D view to images of a size other than the 3D view window size on systems that support this operation Many older or underpowered video cards will not support this operation but newer video cards with the latest drivers should be ok Added support for loading Japanese DEM JDEM mem files Added support for loading SEGP1 seismic shotpoint format data files Added support for loading CompeGPS RTE TRK and WPT format files Added option when batch converting to a zoned projection like UTM or Gauss Krueger to Automatically Select the Best Zone for each file being converted allowing easy con
226. g allowing you to specify the values are slopes in degrees This allows you to easily colorize loaded terrain based on the slope of the terrain Added support for adding new OSM TMS and Google Maps tiled sources using a custom URL naming scheme You can now provide URLs with x y and z variables in them to have the tile URL setup however the source requires e New Supported Formats OoO000 0 0 0 Added support for loading some LandXML files Added support for loading and exporting LASzip compressed Lidar files Added support for loading and exporting Lidar LAS 1 4 files Added support for loading las gz gzipped Lidar LAS files Added support for loading IHS 297 298 Well Data point files Added support for loading and exporting GeoJSON files Added support for Digital Bathymetric Database Variable Resolution DBDB V O O O O 0 O O O O O files in HDF5 format Added support for loading Pathfinder AVHRR Sea Surface Temperature files Added support for loading CORTAD Coral Reef Temperature Anomaly data in HDFS5 format Added support for loading TRMM Precipitation Grid files from NASA Added support for exporting area and line features to CSV files using WKT coordinate formatting Added support for loading WAsP Resource Grid wrg rsf files Added support for loading IGF DIS terrain grids Added support for loading INM 3TX terrain grids Added support for loading Micropath 3CD terrain grids Added support
227. g for palette based layers to switch to a grayscale palette This allows easily setting up a palette image for extraction of the raw palette indices rather than colors in a new palette on export to a grayscale format o When rendering line direction arrows for line features with a label centered on the line draw the direction arrow to the end of the line rather than under the label o Fixed bug causing new copies of custom symbols to be created in the custom symbol folder with an increasing numeric prefix every time you start Global Mapper o Fixed bug in 64 bit version when specifying a fixed height in meters for custom shape symbols that caused those symbols to not select in a symbol selection box o Fixed slowness when changing the background color in v15 1 5 v15 1 6 o Fixed problem in v15 1 5 v15 1 7 with the hill shading setting being disabled whenever making a change on the Shader Options tab of the Configuration dialog o Fixed display of 3D line features in the 3D view when they are set to use a different elevation unit than the elevation display units on the Vertical Options tab of the Configuration dialog Added new button on Search dialog to only Search Selected Features This option will cause the search to only consider features that are currently selected with the Digitizer Tool Add checkbox option to Search dialog to make features selected in the Digitizer Tool automatically be selected in the Search dialog and vice versa
228. g to grid lines on the Vector Display tab of the Configuration dialog Updated combine area operation to allow selecting which attributes have to be the same between features in order to combine them Allow creating distance bearing COGO lines from multiple selected points allowing easy creation of lines offset some distance bearing from a collection of start points Updated option to resample selected lines to have an option to split the lines into new lines at the newly created vertex locations thus allowing you to easily split a line into fixed length pieces Allow deleting multiple attributes at a time when editing more than one feature at a time Now when you select the Delete button on the edit dialog you get a list allowing you to select which attributes to delete with the one selected on the main dialog the only one checked by default Allow cancelling the creation of lines from multiple area features by selecting Cancel on the feature options dialog that appears Added support for old style shortcut keys for copy paste so now Ctrl Insert Shift Insert work for copy paste in addition to Ctrl C Ctrl V Added option to Edit menu to control whether or not we automatically enter move mode when pasting features from the clipboard Added new option to add style attributes to selected features to right click menu Added new option to right click Advanced Feature Creation submenu to create a new point feature offset a given distance bearing
229. ge values Added additional layer Metadata reporting for ASRP CADRG CIB DTED and ECRG format data Improved display of imagery with 32 bit floating point samples Updated BSB export to add dimmed palettes for dusk and night display Added option to specify elevation digits of precision and resampling method when exporting to XYZ Grid files Added option when exporting vector KML KMZ files to control whether or not picture points i e points with externally linked images like a JPEG with an EXIF position are embedded directly in the KMZ or are just linked to the local file on disk Support loading of attribute value pairs from lt description gt tags in KML files where an HTML table is used with a single row of attribute names and another row of attribute values Fixed load of 3D area features from KML KMZ files only a single elevation used O O before Added option to use WKT formatting and includes area and line features when batch converting to CSV format files Added display of additional metadata values for NITF format files Updated Wasp Map export to include both roughness and elevation for area features with both Allow loading NetCDF files directly from grd gz files Made export of background lines i e thick road backgrounds striped lines etc work to PDF files Added option when batch converting from PDF format files to control whether or not PDF layers that are hidden by default are included in the exported
230. gin and end operations with the bounding box being rendered Significantly sped up the loading of line and area features with a lot of vertices from KML KMZ files Fixed problems loading some new MicroDEM DEM format files Fixed problems converting some Erdas Imagine elevation files with void areas to Arc ASCII Grid format files Made elevation values from loaded terrain data be used when batch converting to Simple ASCII Text files and selecting to include elevation data Ignore duplicate point features in DXF BLOCK sections Fixed error in some cases when generating view sheds while checking Fresnel zone clearance Made cut and fill volume calculation operations for areas report the 3D surface area of the calculation area in addition to the 2D surface area e Slightly increased the precision reported for some measurements e Added option to the right click menu on the Overlay Control Center to allow disabling selection of vector features from a layer e Added support for using a MP_BIT_LEVEL attribute value to specify the maximum zoom bit level that a particular feature or feature type for default attribute lists should be visible at in exported Polish MP files e Added new area fill styles black cross and black dot on white backgrounds WHAT S NEW IN Global Mapper v9 01 e Significant New Features O O O O O O O Added support for exporting any loaded data into tiles for use in Google Maps In addition an HTML file will
231. graphically rectifying them providing a transform shift rotate and scale and doing a file based coordinate to coordinate transformation including via gm_xform file Previously the only transformation available for Lidar point clouds was reprojection LIDAR MODULE ONLY Added option to filter selection of Lidar points to only those selected points within a certain elevation range or near certain colors This provides a very easy way to select things like points of a certain color or just high points in a region This option is under the Advanced Selection right click sub menu of the Digitizer Tool when Lidar points are selected LIDAR MODULE ONLY Added support for auto classifying ground points in Lidar points clouds in a script using new LIDAR_CLASSIFY command LIDAR MODULE ONLY Fixed bug with creating of grid using binned grid methods to Feet elevation units creating a grid that says meters when the values O O are in fact feet Made cut copy paste work for points in a Lidar point cloud LIDAR MODULE ONLY Use squared off buffers rather than rounded buffers when getting a path profile through a Lidar point cloud LIDAR MODULE ONLY Use a larger palette of colors when coloring by point source ID so you don t get duplicate colors when more than 5 point source IDs are present Added support for disabling the write of the projection to an exported LAS LAZ file header in a script by adding NO_PROJ_HEADER YES to the EXPORT_VECTOR c
232. gs and large lists of layers Fixed problems exporting non English text to OSM XML files Fixed problem with tiles that don t intersect a provided export crop area being discarded during a web export even if you uncheck the option to skip empty tiles Fixed problem that prevented allowing a port number to be specified for PostGIS databases Fixed issue with changes to the default font for custom feature types being lost if no other changes to custom types are made during that session of Global Mapper Fixed parsing of projection parameters from some BAG files Fixed problems with ordering of frame files in a toc files for CADRG exports in the Southern Hemisphere Fixed issue with changes to spatial databases layers not being saved out to workspace files When doing an elevation export cropped to an area feature treat the area bounds as the bounds of the visual extents of the export rather than the grid cell center as you would specify if manually providing bounds Fixed issue with mouse wheel zooming not working for some free rotating mouse wheels Fixed issue with a non default grid spacing provided while loading a generic ASCII text file as an elevation grid not being saved to workspace files Added option to General tab of the Configuration dialog to control whether or not unit labels like m or ft are appended to projected grid line labels Made the view background color be saved to workspace files Prompt to save the wor
233. h EXPORT_ELEVATION script command o Added support for importing text files with a per vertex time column using the IMPORT_ASCII command with a custom COORD_ORDER parameter describing where the time column is located o Added support for a new PIXEL_SIZE_MAX parameter for EXPORT_RASTER and EXPORT_ELEVATION commands where you can specify the maximum pixel dimensions to use Either width or height may be shrunk to maintain sample spacing o Added support for specifying slope values in percent rather than degrees when defining a shader via the DEFINE_SHADER script command Add SLOPES_PERCENT YES to command to indicate the slopes are in percent e Projection Datum Changes o Made custom datum definitions save into Global Mapper file formats like gmw gmp and gmg This allows you to load a file or workspace saved with a custom datum on another machine and have that datum automatically added to the new machine o Made unrecognized ellipsoids in WKT PRJ files automatically be added as a custom ellipsoid o Added option to set the current view export projection from a WKT projection string stored in a feature attribute Now if you have a feature attribute whose value is a projection string like from a PRJ file you can right click on that O 090 0 attribute in the Feature Info dialog and set the current view export projection based on the attribute value Updated Equirectangular projection to match Esri products when using datums based on
234. h converting to those formats Made automatic collar cropping work for BSB charts Added arrow buttons to the Overlay Control Center to make it easier to change the overlay draw order Added support for loading files from web URLs using the IMPORT command in a script file Just pass the URL with the FILENAME parameter Alphabetized the area line and point type lists on the Styles tabs of the Configuration dialog and on the vector type options dialog Added new Pseudo Natural Color blend mode to combine the color channels in a layer using a common algorithm for generating natural color imagery from CIR imagery Added option to the Digitizer Tool to select multiple area features and right click and display measure information about each feature and the combination of features on a dialog Added options when editing multiple features to rename attributes and also to copy the values of one attribute to a different attribute Added new option when combining terrains to filter one terrain layer based on another by keeping the values in one terrain layer only when the other terrain layer also has a valid value Added options to the View menu to save the current view with a name and then restore named views from a list of the saved views with names Added option to the View menu to restore the last drawn view This allows you to back up through up to the last 20 drawn views Added option to the View menu to zoom the view to a particular sampl
235. h grid coordinates in multiple UTM zones Significantly sped up export of large number of files to ECW and JPEG2000 format files Added support for modifying the default projection used when rectifying imagery by supplying a default_rectification prj file in the Global Mapper installation folder containing the desired default projection Added Ctrl R as shortcut key to restore last saved view Made the compression type used for TIFF files be displayed in the metadata for the file available from the Overlay Control Center Made the image collar specified in the MainPolygonBitmap section of CompeGPS IMP files be used when automatically cropping the collar of imagery loaded with positioning information from the IMP file e Fixed problem with the Update GCP button on the rectification dialog causing the name of the control point being updated to be lost e Added ability to automatically add update a MODIFIED_DATE parameter to vector features when they are modified This option is found in the options list at the bottom of the Vector Display tab of the Configuration dialog e Added control of the JPEG in TIFF quality setting with anew DWORD registry setting at HKEY_CURRENT_USER Software Global Mapper VJpegInTiffQuality to control the JPEG n TIFF quality The default value is 75 e Added control of the default search string used in the Search by Attributes dialog with a new string registry setting at HKEY_CURRENT_USER Software Global Mapper De
236. h results to the clipboard as text to save them to a file if they are too large to all fit on the clipboard Added new volume measure units acre feet acre inches barrels and barrels of oil Made geocoding addresses from a file use Country and Postcode fields The address search will also be tried without the postal code if the results are poor as for some reason the search will sometimes work better without the postal code than with it Added option when batch geocoding addresses to copy any addresses that no match at all could be found for to the clipboard Added option to hide layers that are inside the selected area features to the right click menu in the Control Center previously just an option to hide layers outside selected layers existed Updated Control Center to move the selection to the layer below or above if none below the item s being deleted rather than moving it to the first layer in the list Fixed rare incorrect coloring of some PDF files in the 64 bit version Made holding down the Ctrl key when resizing the main map window maintain the same resolution rather than keeping the same bounds and changing resolution Greatly improved performance when exporting from online sources that occasionally return invalid image files Added option to clone existing attribute styles on the Styles tabs of the Options dialog by right clicking on an item and selecting the appropriate command that pops up This allows easily using an exist
237. hanges on the Palette tab of the Options tab for TIFF files not being applied to overview layers i e it only worked when zoomed in on the layer Dramatically improved performance of exports from large numbers of MrSID files Updated GeoTIFF exports to write out the ellipsoid parameters Updated TIN generation when flattening areas to automatically delete any triangles outside the area feature s being flattened Reversed the order of colors in the HSV shader Made CSV exports include non default symbol names as well as an IMAGE_LINK attribute for EXIF point features Added support for additional HDF formatted data sets When loading gm_style files via the Styles tabs of the Configuration dialog prompt the user to add any types that aren t found on the system Added support for controlling the accuracy and collection system values stored in exported DTED files through the HKEY_CURRENT_USER Software Global Mapper DTEDAccuracy and HKEY_CURRENT_USER Software Global Mapper DTEDCollectionSystem string registry keys Added new option on the Vector Display tab of the Configuration dialog to disable the automatic add of measurement attributes to newly created area and line features e Added new option on the Vector Display tab of the Configuration dialog to treat duplicate vertices in area borders as Pen Up or Pen Down commands thus allowing for having some segments of an area border be not drawn e Made export of generated TIN polygons t
238. hat contain all O values if a non zero elevation attribute is present e Updated Ctrl L shortcut key to copy the current GPS position to the clipboard if a GPS device is currently being tracked e Updated save of GCP files from image rectification dialog to save the latitude and longitude of each point at the end of each line e Fixed crash at startup if you had installed from a USGS dlgv32 Pro installer and had an expiring trial license installed e When loading multiple un referenced images added Yes to All and No to All options for controlling whether to rectify or fake position information for all images that are selected e Added right click option on the Vertices dialog to allow creating point features from each selected vertex e Update Vertices dialog to re center the map on a selected vertex when it is off screen e Add warning to multi band exports if any high bit depth bands would be truncated to lower values without any adjustment Also updated 16 bit values being converted to 8 bit values be shifted rather than truncated for non color bands e Increased allowed number of grid lines when specifying a custom grid spacing particularly in 64 bit builds e Made bounding boxes created from map catalog layers include attributes for the bounds of the map e Fixed gridding of elevation exports when providing an overlap so that it uses the correct spacing for the export when applying the overlap e Updated creation of equal v
239. he EXPORT_VECTOR command Added support for providing a specific offset and scale to use when exporting Lidar LAS files rather than using the default calculated one by adding HEADER_OFFSET and HEADER_SCALE parameters to the EXPORT _VECTOR script command Added support for sorting multiple attribute values when copying from areas to points or lines Use MULTI_AREA ALL_SORT with the COPY_ATTRS script command to do this Added support for creating polygonal coverages and bounding boxes in the current projection with the GENERATE_LAYER_ BOUNDS command using a new BOUNDS_TYPE parameter You can add a MAX_VERTEX_COUNT parameter to specify the maximum number of vertices to include in the polygonal coverage Added support for exporting to OSM XML files with EXPORT_VECTOR command Added support for disabling export of lt ele gt lt desc gt lt sym gt and lt time gt for GPX exports from a script Made EXPORT_RASTER script command work when only Lidar point clouds are loaded Added support for ignoring attributes when exporting OSM XML files by adding ATTR_TO_DELETE parameters to the EXPORT_VECTOR command with the attributes to ignore Fixed problem with GENERATE_ELEV_GRID script command showing error if the only loaded vector data was in the User Created Features layer Improved duplicate finding with SUBSET_IS_DUP YES and MARK_DUPLICATES YES or DELETE_DUPLICATES YES with the EDIT_VECTOR command to allow some fuzziness when matching lines th
240. he External Control API interface e Digitizer Edit Tool Enhancements O 07O O O O Added toolbar for Digitizer Edit Tool to make it easier to perform many commonly used operations Added ability to create new line features by tracing them without clicking at each vertex with the Digitizer Edit Tool Added ability to rotate and scale features Added ability to combine arbitrary area features Added ability to find the intersection of two area features Added ability to crop selected line features to a selected area feature Added ability to apply attributes to selected line features from selected area features that the lines are completely enclosed within Added a new feature to the Digitizer Edit tool allowing you to select one or more points then right click and assign attributes to those points based on the top most area feature with attributes that each point is contained in Added a new feature to the Digitizer Edit tool allowing you to create labeled point features at a regularly spaced interval along selected area and line features This is in the Advanced Feature Creation right click menu Added a new feature to the Digitizer Edit tool allowing you to resample selected area and line features at a regularly spaced interval along selected area and line features This is in the Advanced Feature Creation right click menu Added a new feature to the Digitizer Edit tool allowing you to simplify reduce the vertex count of selected l
241. he last drawn profile if you needed to change some stuff and go back to it Updated right click option to set the color for separate lines draw for each terrain layer to allow specifying the style to use as well so you can draw a layer s terrain values using any line style you want rather than just a single pixel wide dashed line Added option to Display Options menu on the Path Profile dialog to control whether or not portions of the path that don t cross loaded terrain are filled by interpolating the valid elevations on either side of the gap or filled with the minimum valid value along the path Added option to right click menu on path profile dialog to control whether or not the start and stop coordinates are drawn on the profile Move path label to the top center of the path profile when saving the profile and showing the path label It had been at the bottom left of the profile When creating min max extrema points along a path profile make the new point labels be in the selected elevation units for the path and include the elevation unit label Updated the saving of a XYZ file from the path profile dialog to save the path from each terrain surface as separate 3D lines if you have the option enabled to display a separate line for each surface and there were multiple surfaces under the path Updated the saving of a CSV file from the path profile dialog to save the elevation from each terrain surface as separate column if you have the o
242. he value of an INTENSITY attribute for the intensity value exported to the LAS file Fixed export of tiled GeoTIFF elevation files Updated GPX file to use type name for lt desc gt element when the description is unknown Updated TerraServer USA links to point to MSRMaps com as Microsoft changed the name and URL WHAT S NEW IN Global Mapper v11 01 3D Viewer Improvements o The 3D Viewer now supports displaying 3D vector features in space above or below the terrain surface You can also extrude 3D area features to create building like displays o You can now save 3D screenshots of much higher resolution o You can now get descriptive text tooltips about the 3D toolbar buttons by hovering your mouse over them o Added new button to toolbar to toggle wireframe display on and off Other Significant New Features o Added new GPS menu option to send any loaded data map directly to a compatible Garmin GPS device such as a Colorado or Oregon handheld for display as a raster map on the unit This allows display of anything including imagery on compatible Garmin GPS devices o Added support for creating buffer areas some fixed distance around selected area and line features This option is available from the Advanced Feature Creation submenu of the right click menu in the Digitizer Tool o Allowing sorting search results by any attribute rather than just the name o Added support for controlling at what zoom levels a map layer will appear
243. hen splitting an export using this new functionality Modified specification of vertical exaggeration for VRML exports to allow manual number entry rather than using a slider to allow for a greater range of values and a more intuitive experience The VERT_EXAG value used for the EXPORT_ELEV ATION script command also now uses a normal value rather than a strange scaled value Made GEN_WORLD_FILE parameter work for all export formats with EXPORT_ELEVATION and EXPORT_RASTER script commands Updated default SIMPLIFICATION parameter value for GENERATE_CONTOURS command to match what is used in the user interface e Added new collar cropping option to allow manually specifying a degree boundary to crop each side of a loaded layer to For example you might specify that the crop boundary for a layer is at even degree boundaries e Added new option to Search gt Search by Attributes dialog to allow searching on a value in any attribute rather than just a single selected attribute e Automatically use bilinear interpolation when exporting reprojected or resampled raster layers that are not palette based Added ability to label features based on the feature type description and or source filename as well as attributes when setting up feature labeling for a vector layer via the Options dialog for the layer from the Control Center Added support for exporting loaded area data to multi patch Shapefiles Dramatically increased speed of raster and elevation
244. holes in them Improved display of smoothed features in particular streams from watershed generation and contour lines Fixed bug in v14 0 3 release with much larger depressions being filled than necessary in watershed and in particular ridge line calculation Added new built in Text point type Allow shared contrast adjustment to be used on map catalogs to allow easily applying the same contrast adjustment to large collections of images without having to directly load them Added option to control whether or not style attributes are included when batch converting to Simple ASCII Text files Made custom symbols file only be written out if any new custom symbols were added or removed making it much easier to share user data folders between multiple users Updated PDF export to allow automatically calculating a round number scale to save to by checking to print to scale and entering a value of 0 You can also include the calculated scale in the header or footer by using the text 9SCALE in the header and or footer definition Updated Measure Tool so that option to use extra precision for measurements also applies to the display of bearing values so you can make them more precise Added option to ignore EXIF information when loading JPG images and just load them as normal top down images This option in in the Advanced section of the General tab of the Configuration dialog Fixed issue in v14 0 release with ESRI File Geodatabases not open
245. hts of selected 3D areas so you can create a site plan to a non level surface Added new right click option to Advanced Feature Creation submenu of the Digitizer Tool when one or more points are selected to create whisker lines emanating from the selected points Whisker lines are often used to estimate some sort of coverage from selected points to see if a point in a seismic survey covers what is needed Greatly sped up the display of the SpatialOnDemand sources Added a number of new built in Oil amp Gas point types symbols and also improved the appearance of the previous ones e New Supported Formats O O O Introduced a new OTF Objective Terrain Format reader available for an additional license fee OTF is a special multi function format used in war simulation that contains a variety of attribute and surface feature information useful for military work The new OTF extension is available for licensing under the Help menu Added support for loading GeoMedia MDB database files Added support for importing and exporting DWG 2013 files Added support for exporting MapBox MBTiles and RMaps SQLite files for use on mobile devices like many Android apps Added support for exporting ASRP 1 1 files only 1 2 was supported previously Added support for loading JPGIS Japanese DEM XML files Added support for loading ZMap Isomap Line Contour files like KINGDOM uses Support for correctly handling signed 16 bit and 32 bit integer ban
246. i 1950 Mayotte CSJ67 Guyane ED50 TURKEY Fort Marigot St Maarten Guadeloupe 1948 Martinique 1938 RGFG96 RGM04 RGR92 and RGSPMO6 datums Added built in 10TM Alberta and Natural Earth projections Made Irish Grid coordinates display using grid tile letters and coordinates on the status bar rather than just the base eastings and northings Added support for decoding Transverse Mercator projections from Touratech cal files Restored Bogota Observatory transformation from before v10 as it is more appropriate for all of Colombia Improved storage of New Zealand Map Grid and New Zealand Transverse Mercator parameters in GeoTIFF and MapInfo files Corrected ellipsoid used for Kertau 1948 datums from Everest 1830 to Modified Everest 1848 Recognize standard_parallel_1 for true scale latitude parameter for Mercator projections from WKT PRJ files Added support for Links and Clarke Links as a linear unit for projections Updated the projection selection dialog to display the base projection parameter values for State Plane projections Corrected EPSG codes used for SIRGAS 2000 UTM zones e Scripting Changes O Added support for defining variables and associated values using the new DEFINE_VAR script command o Added EXPORT_PDF script command to allow exporting PDF files from a Script o Added GENERATE_EQUAL_VAL_AREAS script command to allow creating equal value areas from a script o Added support for copying attribute
247. ican Samoa 1962 GDM2000 Malaysia Lowrance and Potsdam DHDN Ferro Meridian datums Corrected storage of central meridian for Polyconic projections in GeoTIFF files Modified saving of NAD83 and NAD27 datums to WKT PRJ files so that ESRI products that are inflexible can recognize them Made the corrected standard parallel 1 field be used for the true scale latitude for the Equirectangular projection in GeoTIFF files Added support for decoding LOCAL projections from WKT PRJ files Added support for loading Laborde projections from WKT PRJ files Fixed problems with wrong EPSG code being written to GeoTIFF files for State Plane projections that use units other than meters Fixed problems with loading non standard State Plane projections from PRJ files Made RSO projections with 0 rotation angles work correctly e Scripting Changes O Added new EXPORT_SCALE parameter to EXPORT_RASTER command to allow exporting to a particular scale Added new ATTR_TO_RENAME parameter to EDIT_VECTOR script command to allow renaming attributes from a script Fixed problems with EDIT_VECTOR command not finding any matching results if a comparison string is provided without any type assignments Added EXPORT_SLOPE_PERCENT parameter to EXPORT_ELEV ATION script command to allow exporting slope values as percent slope rather than degrees when exporting Float Grid files Added support for exporting BMP files with the EXPORT_RASTER script command using
248. id North Increased precision of decimal bearings displayed when measuring and also provided a registry key to control this at HKEY_CURRENT_USER Software Global Mapper BrgPrecision Fixed problems exporting MapInfo MIF MID and TAB MAP files with US Survey Feet coordinates Added a new shortcut key Ctrl Shift L to copy the cursor location and the elevation at the cursor location to the clipboard Updated elevation legend display when a Slope Shader is used to be restricted to the min max slope range setup for the Slope Shader Fixed problems with missing time stamps when tracking some connected NMEA GPS devices Added support for additional colors when export to and importing from DXF files Allow selection of any color for label font display rather than just a pre selected list of colors Fixed issues with some data not importing from OSGB GML files Added support for loading PNG files embedded in KMZ files Increased precision of elevation values written to Arc ASCII Grid files now will be up to 3 digits of precision in nearly all cases Changed PNG and BMP world file extensions for screen captures to pgw and bpw respectively rather than pngw and bmpw Improved performance exporting from some WMS data sources Allowed GPS triggered redraw to happen up to 3 times per second rather than just once per second Added support for rods and varas as a unit of measure when using distance bearing COGO input Added support for using
249. ide of the boundary of a closed line feature Fixed bug in v15 2 0 with rectangular buffers range rings around point features being huge Fixed bug in v15 2 0 v15 2 1 with multiple combined range rings not drawing properly Fixed bug where the elevation values will change units when combining 3D lines Fixed crash in v15 2 0 v15 2 8 when doing many Digitizer Tool operation like creating a line when grid lines are displayed e Scripting Changes O Added ability to calculate pile volumes using the new CALC_VOLUMES command Added support for setting the area line and point display for a layer from a gm_layer_style file with the AREA_STYLE_NAME LINE_STYLE_NAME and POINT_STYLE_NAME parameters for the IMPORT SET_LAYER_OPTIONS command Added support for providing a MAP_ORDER of MOVE_FRONT MOVE_FRONT_GROUP MOVE_END or MOVE_END_GROUP to the SORT_LAYERS script command You can also filter what layer group to sort by adding a LAYER_GROUP parameter This allows re ordering individual layers however you need LIDAR MODULE ONLY Support automatically classifying building and high vegetation tree points using the LIDAR_CLASSIFY script command LIDAR MODULE ONLY Support automatically extracting building outlines and tree points outlines from classified Lidar point clouds using the LIDAR_EXTRACT script command LIDAR MODULE ONLY Support filtering exports to Lidar LAS LAZ files by point attributes like elevation scan angle classificat
250. ied elevation range when modifying the valid elevation range of a layer from the Options button in the Overlay Control Center e Added support for loading large TIFF files with YCBCR encoding usually JPEG in TIFF files e When loading ECW and JPEG2000 files with apparently flipped Y coordinates made it optional to flip the image vertically since it some cases that is not correct e Added new red and yellow diagonal crosshair symbols e When saving PRJ and world file names e g tfw jgw use lower case to make it easier to use these files on platforms that are case sensitive like Linux e Made true 3D DXF polylines be generated when exported 3D line features such as those from XYZ files to DXF files e Made features from Tiger Line files include the CFCC census feature class code as an attribute of the feature if available e Improved generation of range rings to always use a great circle distance method if possible even if the current projection is not Geographic e Added support for automatically positioning imagery using ASTER browse meta files WHAT S NEW IN Global Mapper v7 00 e Added support for grouping collections of map files together into a map catalog Map catalogs allow you to easily load view and manage large collections of data without using too much system memory e Added support for tracking real time GPS locations from Garmin USB GPS devices e Added option under the Search menu to allow searching load
251. igitizer Tool to the clipboard and then paste that copied data into any running instance of Global Mapper by using the new Edit menu options e Added new right click option to the Search gt Search by Attributes dialog to allowing copying the selected features to the clipboard Those features can then be pasted into any running instance of Global Mapper by pressing Ctrl V e When triangulating and gridding 3D vector data like LIDAR and XYZ data made all sample locations outside of the bounding polygon of the input data to be discarded to avoid the spurious data outside of the bounds e When triangulating and gridding 3D vector data that includes area features with height values make any regions inside an area feature be flattened rather than just treating the area features as 3D lines This allows making good elevation grids from things like buildings as well as allows easily flattening an area like a lake e Added option to smooth generated contour lines to improve their appearance This option is enabled by default e Added option when generating contour lines to directly export them to Global Mapper Package GMP files rather than displaying them on the main map This allows very large areas to be contoured when used in conjunction with the Gridding option during contour generation e Added ability for users to add support for additional raster and elevation export formats through a DLL plugin architecture See the Developers SDK page at htt
252. ike alternate names for the road Added option to the General tab of the Configuration dialog to control whether or not grid lines should extend beyond the edge of loaded data Added support for dragging Global Mapper Script GMS files onto a running instance of Global Mapper and have them be run Added support for 16 bit per color channel separated Geo TIFF files with more than 3 bands of data Improved rendering of some lat lon data that crosses the anti meridian 180 E W such as range rings Added option to the Measure Tool to have measured lines and areas be drawn along great circles rather than on straight lines all measurements are always along great circles Fixed rare problem with min and max values being treated as invalid from some Surfer Grid files Made national wilderness and wildlife areas in 100K SDTS DLG files be detected and automatically classified as National Park Other Improved positioning of imagery using Ozi map files that reference the Swiss Grid projection Corrected positioning of imagery using Ozi map files that specify a map scale factor MSF value other than 1 Added support for reading text from MTEXT entities in DXF files Made link elements in GPX files be saved as attributes in the created features Fixed very rare lockup when creating an elevation grid from 3D vector point features or during ASCII file import Fixed problem with attribute tags in exported DGN files not being recogniz
253. ile to buffer when explicitly setting a minimum or maximum height to display Made option in Digitizer Tool to find points within some distance of another point save the results to a CSV file Made path profile be available for 3D lines from the Digitizer Tool even if no terrain data is loaded Drastically reduced memory requirements for online data sources when a very large bounds like all data is used and you reproject and zoom way in Made the default File gt Open Data File folder be shared with the File gt Load Workspace menu command Drastically sped up display of Map Layout dialog and Styles tabs of vector options dialogs when very large numbers of features are loaded from Lidar layers Dramatically sped up the load of some GML format files Added progress reporting to MapInfo MIF MID and TAB MAP exports Don t prompt for fake position or rectification for image files like JPG loaded from an archive file like a zip if other files are present in the archive file Removed the Close button from the Overlay Control Center as it was unnecessary and the dialog Red X suffices Updated web exports with the Fill to Tile Bounds option checked to export all layers to the full bounds of the tiles from the lowest zoom level so that you don t get different coverages at different zoom levels Fixed problems rendering overlapping point symbols in 3D view Updated SegY importer to use the same settings for each SegY file involve
254. ilinear interpolation of terrain layers on load to the Advanced section of the General tab of the Configuration dialog Corrected creation of equal value elevation areas around zero Fixed issue with duplicate area entries in the map legend sometimes Fixed bug with some exported SVG files having an extra group close Fixed export of text labels from points with no symbol to SVG files Made fill to tile bounds option work for OSM and TMS exports Added progress reporting and cancel support for selecting areas that are included within or intersect other areas with the Digitizer Tool Added support for loading GIF images from KMZ files Fixed loading of curves from DGN files Made layer names for inserted BLOCK entities in DXF files be assigned properly Added new Advanced option to tiled web format exports i e Google Maps Bing Maps OSM and TMS to use PNG files rather than JPG files whenever background pixels are encountered during the JPG export Added new options to Google Maps tiled export to make the custom map be a basemap layer rather than an overlay layer and to control whether the zoom pan and street view controls are added Fixed use of feet as receiver or transmitter height units for view shed calculation Added option to save the results of a Find Non Connected Line Endpoints operation to a file Added support for NMEA GPS devices that use DPGGA position sentences Added options to DWG and DXF exports to allow
255. in the current projection e Added support for world files using comma rather than decimal points as decimal delimiters e Added support for exporting elevation GeoTIFF files at a particular scale and with a DPI stored in them e Fixed loading of multi patch Shapefiles with multi part triangle fan features e Added support for directly loading bag gz files e Fixed problem with shifted layers not showing up if shifted outside of the previous loaded data bounds until something else is loaded or unloaded e Don t prompt users to rectify images from KMZ files that aren t positioned as ground overlays in the KML files in the KMZ e Added support for loading style information from KML KMZ files where the style definitions are at the end of the file rather than the beginning e Fixed slow response to clicks in some tools like Digitizer when ECW or MrSID files were loaded e Added support for loading Float Grid files larger than 4GB in size e Added ability to change the color used for a view shed layer by right clicking on it in the Control Center and selecting the option to change the color WHAT S NEW IN Global Mapper v11 02 e Significant New Features o Added support to the Map Layout tool for automatically generating a map legend either from the collection of loaded map features display styles or from a user specified color palette o Added Area Styles tab to Options dialog for vector layers with area features allowing users to setu
256. in v14 1 when finding the intersection of 2 areas that caused all of the pieces to not be kept when specifying that you want to keep the parts outside of the crop area as well e Scripting Changes O Added COPY_ATTRS script command to allow copying attributes between different types of features using a script Updated GENERATE_REPORT to allow specifying multiple REPORT_ATTR parameters to group the results by multiple attributes This allows you to do things like find the total area and line length by layer and feature type or name Added support for forcing the filename created with EXPORT_VECTOR to only contain lower case letters by adding MAKE_FNAME_LOWER YES Added support for forcing the filename created with EXPORT_VECTOR to only contain lower case letters by adding MAKE_FNAME_LOWER YES Updated GENERATE_REPORT to support generating based on any recognized attribute type like lt Feature Layer Name gt lt Feature Type gt etc Also added Lidar point counts to the generated report Added support for generating coverage areas concave hulls for layers by adding a CREATE_COVERAGE_AREAS YES parameter to the EDIT_VECTOR script command Added support for using a Yes No Yes No Cancel or Ok box when prompting with DEFINE_VAR Use PROMPT YES_NO or PROMPT YES_NO_CANCEL or PROMPT OK Added support for adding coordinate attributes X and Y to point features using EDIT_VECTOR with ADD_COORD_ATTRS YES Added support for discarding all clos
257. ine and point features contained with selected area features and adding those counts as attributes LINE_COUNT and POINT_COUNT to the selected area features Updated creation of range rings from selected point features to copy the attribute list of the points that the range rings is centered on to the created range ring feature Made the T column from xyzi files automatically come in as an INTENSITY attribute when loading them with the File gt Open Generic ASCII Data File menu command Make splitting lines with per vertex timestamps keep the timestamps Added option to generate world files for tiles exported during Google Maps or Bing Maps exports This can be useful when debugging the exports as you can then easily pull the exported image tiles back into Global Mapper or other software Allowed sorting of the columns in the control points list for the rectification dialog This is handy for sorting by the error column Added option to the Advanced section of the General tab of the Configuration dialog to allow reversing the direction of zooming down for the Page Up Down keys and zooming with the mouse wheel Added option when exporting new GPX files to encode text using UTF 8 rather than ISO 8859 1 This allows non Western European text to be encoded properly Added option to only re order the selected layers in the Control Center when selecting the option to re order layers by name position etc in the Control Center Made the toolbar hi
258. ine and area features by removing vertices that do not significantly contribute to the shape of the feature O Added a new feature to the Digitizer Edit tool allowing you to smooth selected line and area features by moving existing vertices to create a smoother appearance Added option to split selected line features into separate line features for each segment under the Advanced Feature Creation sub menu in the Digitizer Tool Added option to calculate view sheds at each point feature selected with the Digitizer Tool rather than just at the clicked location Allow generation of 3D path profiles from selected area features using the Digitizer Tool previously only lines were supported New Supported Formats O O O O OOOO O O O O O O OOOOO O O Added support for loading from and exporting to PDF GeoPDF format files Added support for exporting loaded vector data to DWG format files Added support for exporting loaded data to Window bitmap BMP format files Added support for loading MrSID MG4 Lidar files Added support for loading Vertical Mapper MapInfo Grid Clutter format files Added support for loading QCT Quick Chart and QED format files Added support for loading Google SketchUp skp format files Added support for exporting loaded vector data to OSM XML OpenStreetMap org format files Added support for loading HTF Hydrographic Transfer Format files Added support for loading SPS Shell Processing Support for
259. ine of any color behind any line style Added new line styles for rendering lines based on elevation This will use the current elevation shader to colorize each line segment based on the average elevation of the segment This is useful for GPS tracklogs and other 3D lines like contours There is also a special GPS menu option to enable this for track lines which is just a shortcut to set the track line style to use elevation shading You can also render the GPS vessel itself in a color from the current elevation o Added the ability to specify flat end caps for line styles o Updated Swipe Tool to allow swiping multiple layers rather than just a single one Useful if you have a group of layers that you want to swipe on and off rather than just a single one o Made Map Layout text display on top of any fixed screen always on top layers rather than under them This allows you to easily place labels on top of things like custom logos and legends o If you edit the style for multiple selected attribute based styles on a Styles tab of the Options dialog for a vector layer and you change the color the color will now apply to all selected styles If you don t change the color the original color will be kept allowing you to change the style of multiple values without making them use the same color o Fixed loading of Surfer ASCII Grid files that use tabs rather than spaces in file header Updated the Feature Info Tips display setup under the
260. ing PDF files Added option to Display Options menu of 3D Path Profile Line of Sight dialog to display any area and line features that cross the path Improved buffer area creation You can now create rectangular squared buffers buffers on just one side of selected line features and buffers with variable width from start to end Added option to create a Quiver Plot from attributes of point features to easily create directed scaled arrows or other symbols With this option you can select U and V vector attributes or Magnitude and Rotation attributes as well as a symbol to get rotated and scaled symbols typically arrows from the attributes of point features The Quiver Plot functionality is available on the Point Styles tab of the Options dialog for a point layer as well as from the Attribute or Create Point Features right click submenu of the Digitizer Tool Added support for displaying and exporting text in multiple languages The following changes resulted Each vector layer s options dialog now includes a Code Page Language setting where you can select which character set the display labels and attributes for the layer user This includes UTF 8 Display labels will be displayed on screen using that character set information The text is converted from the selected code page language to Unicode for display so any text language can be displayed regardless of system language File formats that specify a character set including Shapefile DB
261. ing if you didn t have an ESRI license on the machine Fixed issue in v14 0 release with KMZ files exported for Garmin devices using the GPS menu command not working on the Garmin devices or when loaded back in Global Mapper Added recognition of Wasp Resource Grid Files rsf that are missing the header line Made the image type i e RGB grayscale multi band for JPEG2000 and ECW exports be remembered between exports Added support for loading more attributes from CityGML files Fixed problems loading GML files with gml surfaceMember elements with 2D features in them Updated GPS heading display to always be a positive number range 0 360 Added new options on the GPS menu to control the units that the speed is displayed in Warn users when printing or exporting to scale with a view export projection selected that does not have a consistent scale throughout the map like Geographic or Mercator Added right click option to path profile dialog to allow turning off the display of the 3D path of the line feature the profile was created from if shown for a selected line Made Lidar load options only be remembered within a single group of files being loaded if you check the box to use for all Lidar operations That way you get the options again for the next set and the filter rectangle can also be remembered Fixed problem in some v14 builds with view sheds not rendering properly Fixed flicker of Control Center when working with map catalo
262. ing style for a new attribute value Fixed some issues with SOSI export and added OBJTYPE to every feature exported to SOSI file Updated ZMap Grid ASCII Export to use 5 columns of elevation rather than 3 Restored dynamic behavior of water level slider on 3D view options dialog Fixed issue in v13 2 release with prompt for type of unknown files no longer being shown when using the File gt Open Data File menu command Fixed issue with map layout items disappearing when you cancel a KML KMZ export Fixed issue with small custom shape symbols being larger than specified when viewed in Google Earth after exporting to KML KMZ Improved recovery from errors due to setting 3D view texture and or terrain size larger than your video card can handle Added support for creating equal value areas from map catalogs Fixed problems drawing some symbols from IoGas gas files Corrected slope attribute value display to show degrees rather than radians for equal value area creation on a slope grid Added support for GDAL no data value tag 42113 when reading and writing elevation GeoTIFF files Added option to generic ASCII text import to create areas from closed line features if no CLOSED attribute is specified for the feature Fixed error loading high bit depth NITF files with embedded JPEG2000 images in v13 2 Sped up rendering of ECW MrSID and JPEG2000 images when zoomed out a bit on them They are no longer automatically interpolated to improv
263. initialize a shader from a Surfer CLR file this provides an easy way to makes copies of custom shaders e Added support for loading new tab delimited GNIS format files e Fixed problems exporting attributes as tags to DGN format files this problem was introduced in v8 02 e Made graphic group codes for 2D lines and points from DGN v7 files be used as elevation values e Made the z scan range value for 2D lines and points from DGN V8 files be used as elevation values e Added new GRID_KEEP_CELL_SIZE parameter to the scripting language to allow specification that grid cell size should be maintained at the expense of sample spacing e Added support for reading 8 bit palette and grayscale Intergraph COT format files WHAT S NEW IN Global Mapper v8 02 e Added the ability to load layers like graphic images to be displayed at a fixed location on the screen rather than tied to earth coordinates This allows you to add things like headers and watermarks very easily There is a new File menu command called Open Data File at Fixed Screen Location that allows this e Added ability to export any loaded data to tiled images for use in NASA s World Wind application The new World Wind export option under the File gt Export Raster and Elevation Data menu will correctly break your data up into tiles at various zoom levels and also create the necessary XML file to view your data in World Wind e Added the ability to copy features selected with the D
264. int clouds stored in GMP files will also load extremely quickly Added display of a large number of statistics for loaded Lidar point cloud layers including a breakdown of the return counts by classification return type etc The statistics are displayed on the Metadata dialog for a Lidar layer which you can display from the Control Center Updated editing of Lidar point features to have special edit dialogs for the attributes that apply to Lidar point data Added option to load Generic ASCII Text files as Lidar point clouds providing much improved handling and reduced memory requirements for XYZ and XYZI files Added new built in point types LIDAR Low Point Noise and LIDAR Overlap so those types can have their style customized and be turned on and off for filtering Added options to both load and save Lidar point classifications with values between 32 and 255 to LAS 1 2 and earlier fields even though it violates the LAS specification Some applications like Terrascan violate the specification to store classes 32 255 This option allows you to use them with software that doesn t support LAS 1 4 which supports 256 classifications yet e Global Energy Mapper Only Features O O O Added option to Digitizer Tool to easily subdivide an existing area into 4 separate areas like sectioning an area Useful for parcel maps Updated option to create a flattened site plan to allow smoothly transitioning to the existing heig
265. ints Updated generic ASCII text import where attributes from coordinate lines are kept and lines are broken based on the change in some field to add the break attribute to the attribute list for the line feature Added option to KML KMZ vector export to control whether or not filled area features with no border are chopped up automatically into smaller pieces to avoid issues displaying them in Google Earth Added additional attribute and style decoding from CityGML files Updated BSB exports from a single layer with an automatic crop boundary to save that in the exported KAP file s PLY entries rather than the full export bounds to allow seamless viewing in other applications Updated CADRG and CIB exports to wrap the a toc file in a NITF header to make it readable by more applications Fixed errors reading some ASRP data sets with incorrect data in the header file Added built in area fill colors for OSGB VectorMap Local GML files Made area groups be supported for import from and export to CSV files with WKT coordinate strings and MULTIPOLYGON objects Added option to Shapefile export to allow discarding any attributes for which all values are empty Fixed problems reading some Shapefiles over 2GB in size Made the RGB color at the cursor location display in the status bar for ECW JPEG2000 and MrSID image files Updated Shapefile export to replace degree characters with spaces since some versions of Arc can t handle degree symbols in D
266. ints areas from classified Lidar point clouds This is a very useful option on the Lidar toolbar that combined with the automatic classification and manual cleanup tools can allow very efficient extraction of tree points with crown height and width attributes as well as approximate tree coverage areas from Lidar point clouds o LIDAR MODULE ONLY Added options to filter Lidar points by class elevation color scan angle source ID etc when exporting gridding and selecting from point clouds o Added option to plan and record a 3D fly through as a video file New toolbar buttons on the 3D dialog allow setting up and recording a high definition 3D fly through o Support rendering textures on 3D polygons in the 3D view This allows for the creation of photo realistic 3D model views when loading 3D data that has texture images included There is a drop down on the 3D toolbar to select the Skybox background for the 3D display o Added a Graph and Chart Manager under the Analysis menu to allow creating graphs and charts from loaded data The following type of operations are supported Bar graph histogram line chart or bar chart from any attribute field in O loaded vector layers Histograms for gridded terrain layers i e DEMs You can save the graph to a BMP file and place it on the map as a fixed screen position layer Graph definitions are saved in the workspace file for easy saving and sharing Added option to export selected l
267. ints will have 32 vertices Added support loading ELLIPSE entities from DXF and DWG files Made text exported to DXF files maintain its color Made any THF file be recognized for use with a ASRP ADRG format file Fixed loading of text from OCAD files Only half of the text was loading in some cases Fixed problem where original elevation as read from a 3D point Shapefile won t go away even if you edit the attributes Updated PDF export of labeled area features to ensure the area label is included in the PDF if the area is cropped The label location will be moved to a central location in the cropped area Fixed alignment and font issues especially with rotated text for PDF export Added support for more vector features from EMF files like Bezier curves and complex paths Fixed problem with areas in 3D Shapefiles not loading if the only have 2 unique points if elevations are ignored but 3 or more if Z values are considered Automatically load additional models in DGN files if the active model is empty Fixed crash loading some rare YCbCr encoded TIFF files in 64 bit builds Fixed problem with striped and background line and area border styles not exporting properly to PDF files Fixed bug with vector based symbols like many Geology symbols not exporting to PDF files Fixed problems loading some CityGML files O Fixed inconsistent scaling of vector exports to CADRG depending on the bounds of the loaded data and not the bounds of
268. ion color etc with the EXPORT_VECTOR and GENERATE_ELEV_GRID commands using new parameters LIDAR_FILTER LIDAR_COLOR_FILTER LIDAR_COLOR_DIST LIDAR_SCAN_ANGLE_RANGE LIDAR_ELEV_RANGE and LIDAR_SOURCE_ID_LIST Updated the COMPARE_STR parameter for the EDIT_VECTOR command to support more comparison operators than and including lt lt gt and gt Support including the group name in the FILENAME parameter for commands like SET_LAYER OPTIONS You can add lt sub gt in the filename filter to O O specify a group separator Added support for finding and fixing invalid polygons area geometries by adding FIX_INVALID YES to the EDIT_VECTOR command Added support for creating point features spaced along line area features using the EDIT_VECTOR script command The CREATE_POINTS_ALONG_FEATURES attributes allows you to specify the spacing of the points in meters Added built in ZTIMESTAMP DATE and TIME variables so you can easily add the current date and time to things like log messages with the LOG_MESSAGE command Added option to specify what elevation value is the no data void elevation by adding VOID_ELEV to the IMPORT_ASCII script command Made GEN_PRJ_FILE and GEN_AUX_XML_FILE parameter work for EXPORT_ELEVATION script command Display filename being imported or exported in progress for script workspace Show progress for IMPORT_DIR_TREE command and allow cancel of process Added support for defining a map layout fro
269. ion of new maps for Garmin GPS units Added support for loading Polish MP format files like those used by the cGPSMapper application Added support for loading vector data from KML KMZ format files Added support for loading NITF National Imagery Transmission Format format imagery Added support for loading Geodas Grid GRD98 format elevation files Added support for loading some Intergraph COT format files Added support for loading CDF GES Cartographic Data Format files Greatly improved the raster layer options by adding support for color balancing individual red green and blue adjustment linear min max contrast stretch setting transparency for multiple layers at a time feather blending see below and cropping to native bounds or by a given number of pixels Added feather blending support for raster layers to the Options available from the Overlay Control Center This is an extremely powerful feature that allows smoothly blending raster layers with underlying layers For example you might have high resolution imagery on top of lower resolution imagery With feather blending you can smooth the sharp edge and make the transition at the border seamless Added support for checking clearances with respect to the first Fresnel zone when calculating view sheds and performing line of sight analysis This allows for a more accurate visibility calculation depending on the wavelength being transmitted Added support for having labels be d
270. ion to use newer PROJ4 library definition rather than older GCTPC library definition that does not seem to be consistent with any other applications Added support for using inches as a linear unit with projections Increased valid range for scale factor parameters from 2 2 to 10 10 Allowed use of WGS84 with Austrian Grid Belge1972 and Dutch Grid projections Updated MrSID imports to treat false easting northing values embedded in the SID file as GeoTIFF tags as always being provided in meters as that seems to be how the MrSID library treats them e Scripting Language Changes O O Added new LOAD_TYPE_FILTER script command for loading area line and point filters from GMF Global Mapper Filter files Added new EXPORT_PACKAGE script command to allow exporting loaded data to Global Mapper Package files Added new GENERATE_REPORT script command to allow creating a text report about the loaded vector layers including feature counts combined line length and total covered area broken down by feature name type or attribute value Added new GENERATE_LAYER_BOUNDS script command to allowing generating a layer with bounding areas for the loaded data from a script Added support for splitting a vector export into a separate file for each group of features with the same attribute values using the SPLIT_BY_ATTR YES parameter The new FILENAME_ATTR_LIST and FILENAME_INCLUDE_ATTR_NAME parameters can be used to control the file naming w
271. ion values o Added automatic recognition of potentially iconized road names when editing road features This allows you to do things like enter a road name of I 35 and have it automatically be recognized as an interstate highway iconized road name o Added new option to the File menu of the rectification dialog to allow easily saving a world file that represents if possible the transformation defined by the currently provided control points o Added option to the vector filter dialogs to save and restore a filter to a file o Added yards and chains as available units of measure when using the Measure Tool e Projection Datum Changes o Added built in support for the MGA Map Grid of Australia projection o Added built in support for the Aratu and Camacupa datums o Improved accuracy of OSGB36 datum conversions by using the OSTNO2 tables o Made Bonne projection work properly when the origin latitude is in the Southern Hemisphere Added support for decoding Albers Conic projections from Ozi map files o Added support for correcting the projection of multiple raster files at once only if all of the raster files being corrected have the same projection to start with o Fixed problem with displaying the equator grid line when using the Van der Grinten projection o Fixed problems encoding and decoding Lambert Cylindrical Equal Area projection to from GeoTIFF files e Added option to the Shader Options tab of the Configuration dialog t
272. isplayed at a fixed height in meters rather than at the same size at each zoom level This option is on the bottom of the font selection dialog when either selecting a font for a classification on one of the Styles tabs on the Configuration dialog or when selecting a font for a feature when editing it Added option to always display the label for a particular feature or classification if labels are displayed This option is on the bottom of the font selection dialog when either selecting a font for a classification on one of the Styles tabs on the Configuration dialog or when selecting a font for a feature when editing it Digitizer Tool Changes o Added an undo option when digitizing new features with the Digitizer Tool or drawing new measurements with the Measure Tool Simply press Ctrl Z and the last vertex added to the feature measurement being drawn will be removed o Changed the snapping behavior in the Digitizer Tool so that snapping is disabled using the ALT key rather than CTRL and that snapping to vertices only is enabled by holding down the V key rather than SHIFT o When digitizing new features or moving existing feature or vertices using the Digitizer Tool made holding down the CTRL key make the new location be snapped vertically holding down the SHIFT key make the new location be snapped horizontally and holding down both the CTRL and SHIFT keys snap the location diagonally Added a new advanced selection option popup
273. ited format e Sped up some raster elevation exports from map catalogs exports that span many maps from the catalog in a single export row e Made elevation units for most gridded elevation exports default to the elevation units of the loaded data or if the vertical display units are manually set to metric or statute on the Vertical Display tab of the Configuration dialog to meters or feet respectively e Added option when gridding on export and naming the rows or columns with numbers to specify a step value by which to increment the row or column numbers rather than just 1 e Made the default projection system displayed for files for which the projection cannot automatically be determined be configurable This default projection system can be set by saving a default prj file in the Global Mapper installation folder WHAT S NEW IN Global Mapper v8 00 e Added support for loading data from OpenGC WMS servers This is done through the new File gt Download Online Imagery Topo Maps menu command formerly the Download TerraServer menu command Several sources are built in providing easy access to gridded elevation data for the US NED and the world SRTM as well as color imagery for the entire world Users can easily add their own WMS data sources as well Added support for exporting loaded vector data to the Polish MP format for use with the cGPSMapper application www cgpsmapper com lt http www cgpsmapper com gt which allows the creat
274. jection when that aux xml specifies international feet Support automatic decoding of RGF93 datum from ECW files Fixed problem with LDEM Lunar DEM PDS files coming in as Sinusoidal projection instead of Equirectangular e Rendering Style Changes O Sped up the display of data layers with a very large number of features particularly when zoomed in on the data Added option to draw labels with an opaque filled background of a custom color rather than always using the current view background color The new option is on the font selection dialog Added option to add just minimum maximum and average attributes when using the Init from Values button for attribute based styling for a layer This allows easily setting up a color range without initializing to all values for a range of numerical attributes Further speed up when rendering raster layers cropped to polygons particular when cropped to polygons with large numbers of vertices Added loaded view shed layers to the map legend when displayed with the color for each listed along with the view shed layer name o Fixed crash zooming to view in Google Earth in v15 2 0 v15 2 1 o Fixed problem with dialogs not remembering what they were resized to in v15 2 0 v15 2 2 o Fixed problem with option to hide area labels that are not completely contained within the areas in v15 2 4 o Fixed bug with attributes not showing in Quiver Plot dialog opened from Point Styles tab of Optio
275. jections far from the central meridian Added built in Mars MOLA Sphere datum so that newer Mars data can automatically load with the correct ellipsoid model O Added built in Batavia Indonesia and NAD83 NSRS2007 NAD83 NSRS2011 NAD83 PA11 and NAD83 MA11 datums and EPSG codes Note the special NAD83 datums are currently treated as coincident with base NAD83 The new codes are to allow maintaining the correct metadata Added built in Clarke 1866 Ellipsoid and Clarke 1880 Ellipsoid datums to make it easier to position older small scale maps that only specify an ellipsoid but no datum When using GeoCalc integration mode added button to the Projection tab of the Configuration dialog to allow reloading the GeoCalc XML DataSource without needing to restart Fixed fetch of projection information from ESRI aux xml files in some cases Improved storage and retrieval of Minnesota County Datum projections with custom county datums from GeoTIFEF headers Made State Plane projections with NAD83 HARN datums store the EPSG code correctly to GeoTIFF and Lidar LAS LAZ files Improved compatibility of GeoTIFF files using the Web Mercator projection in Esri products Fixed shift in RSO Malaysia projections in v15 2 1 v15 2 5 e Online Source Changes Q O Added built in streaming online ASTER GDEM v2 worldwide terrain data set at higher resolution just over 30 meters and from a much faster more reliable server than the previous strea
276. ke sure that at least the entire area coverage is kept so we don t lose anything on bottom or right if we snap up and or to the left Made named views be immediately shared to other running instances of Global Mapper rather than requiring an instance to be closed then the other instance re opened to make them available e Fixed lockup saving GPS tracklog in some cases e When initializing a new custom shader from an existing file like a Surfer CLR file initialize the shader name to the filename if the shader name is still the default e Fixed rendering of Solid with Black Edges line style when a fixed width in meters is used for the line e Fixed problem with un grouping a layer in the Control Center in the middle of a group also un grouping the later layers in the same group e Fixed problem with some windows showing off screen when you go from a multiple monitor setup to a single monitor In particular this was an issue with the Control Center e Fixed display of nested progress dialogs on multi monitor displays e Fixed problem with Select All from everything or just in layer not select islands holes in parent areas so that subsequent operations don t always do anything with those islands holes e Fixed bug with some edges of manually specific crop boundaries being lost when loaded from a workspace in v15 1 7 v15 1 8 WHAT S NEW IN Global Mapper v15 1 e Significant New Features o Added support for loading data from a
277. kes it easier to simulate things like wooded areas blocking reception within those areas and not just beyond them e Added Landsat True Color links from resmap com to the File gt Open ECW File from the Web menu dialog e Added support for reading in 3D DXF line features and saving the separate elevations for each vertex rather than using the elevation of the first vertex for the entire line e Added ability to create regularly spaced tiles of elevation grids from 3D vector data when right clicking on vector layers in the Overlay Control Center and selecting the option to create an elevation grid from the data This makes it easier to deal with very large data sets that cannot be gridded all at once without running out of memory e Added support for Global Mapper Package files larger than 2GB in size WHAT S NEW IN Global Mapper v7 01 e Made the middle mouse button drag the map in all of the tools and not just the Zoom tool e Added option to use an elevation shader other than the shared elevation shader selected on the toolbar for rendering an elevation layer This option is available from the Options button in the Overlay Control Center e Added option to grid i e tile data during batch conversion e Made decimal digit fields exported to Shapefiles display as decimal numbers by default when loaded into other applications rather than displaying just as whole numbers e Added and or improved metadata display from the Overlay Control Cente
278. kspace when unloading everything or closing Global Mapper if the projection background color or any map layout options changed Fixed problems loading MapInfo files with non Western characters in the filename Updated raster exports from a map catalog to snap the export to a pixel boundary of the layers in the map catalog if the option is checked to snap exports to a pixel boundary if possible Fixed problem with overview layers from GeoTIFF files being ignored when loading the GeoTIFF from a workspace file or map catalog e Fixed colors for ASRP exports and allowed numbers in the data set name e Fixed bounding box coordinate order in TRANSHO1 THF file exported for ASRP exports and also added bounding polygons for QAL and SOU files written for that export e Added Avg Speed column to Feature Vertices dialog for line features with per vertex time stamps to show the average speed to the end of a given segment e Allow deleting vertices on the Feature Vertices dialog by pressing the Delete key e Made non default resampling option for BIL elevation exports actually work It was always being ignored and the default resampling used e Fixed problems loading some RIK3 format files e Sped up web exports cropped to complex areas when skipping empty tiles and the actual data files cover only a small part of the crop area e Fixed problem loading SHP files over 2GB in size e Make sure that the display label for area features with islands does
279. l style during exports cropped to the selected area feature s Made point feature labels be displayed even if the points are selected with the Digitizer Tool e 3D Path Profile Line of Sight Tool Changes O O O Added support for calculating cut and fill volumes along a path profile using the 3D Path Profile Line of Sight Tool Added additional menus to the 3D Path Profile dialog to provide easier access to some of the options Also made the path details be copied to the clipboard when displayed Added additional options to the 3D Path Profile dialog for controlling the from to position display format and the coloring and style of the profile elements Fixed problems with the path profile tool when the loaded data is not correctly projected i e the lat lon readout in the status bar reads that the coordinates could not be determined Made elevation values saved to XYZ files from the path profile dialog have 2 digits after the decimal place rather than 1 e 3D Viewer Changes O O O O O In the 3D viewer allow the vertical exaggeration to be increased all the way to a factor of 100 0 rather than just 20 0 In the 3D viewer made the Panorama Walk mode toolbar button act as a mode just like the Rotate Move and Zoom buttons since that is how it behaves In the 3D viewer added an option to the Properties dialog to allow the background color to be changed In the 3D viewer added an option to the Properties di
280. large Erdas Imagine elevation files with multiple overview layers o Fixed issue with overview layers not being used for some RGB Erdas Imagine IMG files resulting in very slow display of very large RGB IMG files o Added option to save a text metadata file with some image format exports This is the same text metadata format that you can save when doing a screen capture o Made elevation units selected for vector layers loaded from ASCII text files stick o Allow raster elevation export plugin DLLs to modify the projection bounds or pixel dimensions of an export by modifying the values in the EP_ExportStarted_t structure passed to EP_ExportEvent function with new EP_Event_PrepareExport event sent before any others o Sped up display of Shapefile export options dialog when large map catalogs of vector data are loaded Updated Favorites toolbar to sort the manually added and automatically added items and to sort them alphabetically rather than by usage to make them easier to find When providing custom attribute based line styling with interpolation between numeric values make the specified line widths interpolate between values as well Added new option to the Advanced section of the General tab of the Configuration dialog to snap raster elevation export bounds to the nearest multiple of the specified pixel size So if you check this and export with 0 5m resolution pixels the output will start on an even 0 5m multiple boundary Added option to 3D vie
281. lay line labels on the center of the longest segment of the line to the Vector Display tab of the Configuration dialog This prevents line labels from jumping around as you zoom and pan around e Added new option to only snap to area and line vertices by default when drawing new features to the Vector Display tab of the Configuration dialog Holding the V key when drawing the new features will toggle this behavior e Enable snapping to existing features when inserting vertices into existing area and line features using the Digitizer Tool The shortcut key to stay in insert vertex mode was changed to the I key from ALT since the ALT key is used to disable snapping behavior e Added option to crop Shapefile exports to selected area features This will only include point features inside the selected area features and line and area features that intersect the bounding box of the selected area features e Updated GeoTIFF export to always write out all projection information and parameters even when an EPSG code is matched and written e Added support for additional parameters for recommended route 0x0108 and marine contour 0x0105 lines when exporting vector data to Polish MP files e Fixed memory leak when running a script file with EXPORT_RASTER commands that includes vector data from the command line WHAT S NEW IN Global Mapper v9 03 e Significant New Features o Added support for loading Tiger 2007 Shapefiles with full attribution and a
282. le formats like Simple ASCII Text export to support approximately the same level of ground truth precision as linear coordinates like meters Fixed problem with offscreen islands not being exported when exporting simple ASCII text format files Fixed problems loading uncompressed CIB imagery Fixed problems with edited labels for Shapefile features not being saved to workspaces Split line features with more than 5 000 vertices into multiple pieces on export to DGN files as some applications like Microstation do not support lines with more than 5 000 vertices Added option to DGN export for converting dark line colors like black to white This is useful as many DGN viewers automatically use black as the background color making dark colors very difficult to see Added option to the GPS Status dialog to copy the current GPS location to the clipboard Added support for loading polyface mesh features from DXF files Added support for loading DXF files with nested BLOCK references Fixed problems handling some SPLINE entities in DXF files Added new View gt Properties menu command to allow displaying properties about the current view including bounds scale and resolution Made ERS files be used for positioning information if needed for additional formats like JPG ECW TIFF and PNG Increased the resolution of the color intensity slider on the raster options dialog and also made the current intensity value be displayed Made filena
283. le tabs of Options dialog for vector layers to allow initializing the attribute based styling list with the list of attribute values found in the selected layer s Updated cut and fill volume analysis for area features to allow specifying a range of elevation values to calculate the volumes relative to When this is done the results for each cut level will be displayed in a table Added option to the Vector Display tab of the Configuration dialog allowing changing the default font face name Reduced memory required for loading PDF files so that more PDF files can be loaded at once at higher resolutions Made cropping of multi band exports to areas features work properly Added option to control fading and maximum display level for raster KML KMZ exports Added advanced option to raster KML KMZ export to allow separating each layer exported into its own ground overlay in the exported file Added support for lt PhotoOverlay gt elements from KML files They will come in as Picture point features that show the image when clicked on Added support for using KML KMZ files reference via external lt NetworkLink gt elements when loading KML KMZ files Added support for using styles referenced via external URLs when loading KML files Made duplicate vertices be removed from area features when exporting to Shapefiles Updated equal value area creation to support cropping to bounds or selected area features Added support for only selecting point f
284. lected rectification method to the dialog title bar Added support for using a Helmert similarity transformation when rectifying imagery and vector data layers Made polynomial rectification with 6 or more control points use a 2nd degree N 2 equation Made Ctrl Left Click in the Zoomed View automatically fill in the projected coordinates and also zoom the Reference View to the same approximate location and zoom scale if possible Made Ctrl Left Click in the Reference View automatically fill in the pixel coordinates and also zoom the Zoomed View to the same approximate location and zoom scale if possible Added option under the Options menu to automatically save the control points GCPs to a GCP file when closing the dialog Made the control point list resize when the dialog is resized e Projection Datum Changes O Added built in support for the Japanese Projection System zones I XIX the Philippines Grid projection zones 1 5 and the Sinusoidal Integerized projection Added built in support for Clarke 1866 Authalic Sphere ED50 North Sea ED50 Norway Offshore N62 ED50 Norway Offshore S62 JGD2000 Japan LKS92 Latvia 1992 NAD83 South Carolina HPGN Naparima 1972 Rome 1940 Monte Mario w Rome meridian SIRGAS 2000 Brazil South American 1969 Brazil Wisconsin Burnett County Wisconsin Douglas County and special MODIS spheroid based datums Added support for a Central Longitude parameter for the Geogr
285. levations from terrain to selected point features when one or more of the points already had an elevation value o Fixed bug with cropping points to an area and placing the results in a new layer just deleting the points in the area and not creating new ones o Fixed buffering of areas with islands holes to also buffer the hole in the parent area rather than dropping the hole o Made per vertex elevation lists correctly convert units when moving 3D features from layers in one elevation unit to layers with a different elevation unit o Fixed bug causing a lockup when creating area features from selected 3D line features when some of the lines had consecutive points with the same XY location but differing Z values e Scripting Changes o Added conditional processing via new commands IF ELSE_IF ELSE END_IF This allows conditional execution of groups of commands based on some variable value The variables could have been passed on the command line or the user prompted to enter one o Added support for exporting web format tiles Google Maps Bing Maps OSM TMS MBTiles RMaps using anew EXPORT_WEB script command Added support for updating the style of loaded features by providing style attributes with a new STYLE_ATTR parameter for the EDIT_VECTOR command This allows you to easily update the style of matching features based on whatever criteria that you want and to just update the pieces of the style that you want like just the color or styl
286. lic Sphere to behave as the USGS intended i e no conversion to WGS84 similar to how Google Maps datum works Added support for saving almost every datum from Global Mapper into exported Erdas Imagine files O Added EPSG codes 2991 and 2992 for Oregon Lambert projection Updated Winkel Tripel projection to allow modifying the True Scale Latitude Updated the Interrupted Goode Homolsine projection to support a Central Longitude parameter Added support for zone 10 to Gauss Krueger Germany 3 degree zone projection Corrected Kansas State Plane North and South NAD83 zone definitions for ECW files Fixed problems parsing some MGRS coordinates with shortened coordinates Added support for getting Gauss Krueger Germany 3 degree zone projections from Touratech TTQV cal files Added support for saving projections using arc second and grade units to WKT PRJ files Added support for decoding of Geographic projections using units other than arc degrees from WKT PRJ files Updated scale value for Arizona West State Plane projection to have enough digits of precision e Scripting Changes O Added new EDIT_VECTOR script command replacing the ASSIGN_TYPES command to allow adding updating feature attributes values and display labels reclassifying features rotating scaling offsetting feature coordinates connecting islands of areas to the main parent deleting duplicate features or marking features as deleted by searching loaded features for
287. lines to new layers Fixed problem with small red rectangle displaying for new point features using the No Symbol symbol type Improved loading of Shapefiles with overlapping island areas within a parent Fixed bug cropping to selected areas during batch conversion This bug was introduced in the v11 00 release Drastically reduced memory requirement for Surfer Grid exports allowing basically unlimited size exports Made generated contour lines be oriented such that the higher elevations are to the left of the line Fixed error saving workspace files with a PDF loaded Updated the ETA reporting on progress dialogs to add a completion date if the operation is estimated to take more than 12 hours Fixed problem getting DigitalGlobe imagery in some locations Added option to PDF export to control whether or not fonts are embedded Fixed problem with background values stored for exporting multi band GeoTIFF files Added option to BIL export to allow exporting shorter ESRI Arc format hdr file Improved import of HATCH entities from DXF files to maintain islands holes inside areas Reduced simplification threshold used when saving active GPS tracklogs from 1 5 m to 0 5 m so more detail will be kept from recorded track logs Added new GPS menu option allowing you to disable the simplification of track logs Fixed crash loading some large Erdas Imagine img files Added support for import and exporting DGN v8 files in 64 bit builds Added s
288. lists for each type be saved to gm_style files so they can easily be transferred to other systems e Updated the CALC ATTR option in the Control Center to allow calculating multiple new attributes without having to re open the dialog Added support for adding a DRAW_ORDER attribute to area features to control the draw order This can be directly in the feature attribute list or in the default attribute list for the type Valid values are to 128 Added support for bringing in measures from point and line Shapefiles using PolyLineM PointM or MultiPointM shape types For PolyLineM the measures come in as the per vertex elevation values Updated Shapefile export to support exporting per vertex elevation values as Measure values rather than Z values For example to export PolyLineM rather than PolyLineZ Added option to spatial database exports to split into separate tables by the layer name Updated Wasp map export to automatically shrink areas with a single roughness value to avoid touching adjacent areas so that the roughness can be applied just inside the area with a small buffer between the areas to make Wasp happy In addition any areas with holes islands will be split up to so that no holes are necessary to avoid overlap Added option to turn the display of labels on and off for a layer on the Options dialog for the layer Updated vector exports to allow cropping to multiple areas at once and also to area features with islands
289. lor from all layers under the cursor rather than just the top most layer Added Preview to the Custom Shader dialog so you can easily visualize what the custom shader colors will look like Made box minimum maximum resamplers work for slope values before they just provided the average When creating new area line and point types from the Styles tabs of the Configuration dialog default the style to what is selected in the type list Support selecting point styles based on a point type wherever you can select a point symbol to use This allows you to set up a point type with the symbol you want and then select by that type name rather than re defining the point style somewhere else Greatly improved the appearance of the Geology Arrow symbols when scaled or rotated They are now vector symbols internally so they are clean no matter the scaling or rotation Added option to specify that line styles should render with flat endcaps rather than rounded as normal There is a new checkbox option on all line styles dialog allowing you to specify that lines more than a single pixel wide should draw with a flat end Made default attribute list dialog for feature types be resizable When adding area line point types from a cGPSMapper RGNType txt file from a Styles tab of the Configuration dialog automatically assign the feature style from any existing GM type that the MP type code was mapped to o Added option on Palette tab of Options dialo
290. ly puts you in join mode Add an ENCLOSED_AREA attribute to closed lines when adding measure attributes e Scripting Changes O Allowed for interactive user provision of variable values using the PROMPT and PROMPT_TEXT parameters for the DEFINE_VAR script command This allows you to run scripts that take user input Parameters that expect A value of YES or NO to enable or disable functionality can be enabled with just the parameter name So rather than saying FLAG_PARAM_NAME YES you can just say FLAG_PARAM_NAME to get the same behavior o Updated COMBINE _LINES script command to allow CREATE_AREAS_FROM_LINES YES to be specified for combining lines to areas from a script o Added support for specifying bounds for many commands with an ADDRESS and RADIUS field o Added support for BSB export with EXPORT_RASTER script command o Updated EDIT_VECTOR command to allow special names like lt Feature Name gt or lt Index in Layer gt on right side of ATTR_VAL parameter o Updated EDIT_VECTOR command to allow COMPARE_STR to use for comparison in addition to o Updated EDIT_VECTOR command to allow comparisons to be done numerically by adding a COMPARE_NUM YES parameter to the command o Added support for wildcards in FILENAME parameter to IMPORT_ARCHIVE command o Fixed bug from v13 00 that caused POLYGON_CROP_BBOX_ONLY parameter for EXPORT_RASTER command not work o Added support for exporting XY_COLOR format files using the E
291. m ECW and JPEG2000 files Made additional speed ups to ECW and JPEG2000 exports when exporting from large numbers of loaded files Added option to feathering to just crop to the specified feather boundary rather than actually feather blending Added option to palette based exports to use a custom palette from a pal file such as one saved from the transparency dialog in Global Mapper Added new Option menu command on the rectification dialog to allow displaying the transformation equations used for the specified control points Added new option to the Advanced Selection menu in the Digitizer Tool for easily selecting all of the island areas associated with a parent area and deselecting the parent Prompt for the type of 16 bit Erdas Imagine img files i e are they elevation data or imagery Improved loading of HATCH entities from DXF files Improved loading of text from MTEXT entities in DXF files Added option to Google Maps export to select the default Google Maps background layer that is displayed 1 e street maps imagery or terrain Made the last searched address be remembered on the Find Data Online and Find Address dialogs Made point classification and intensity be available for Lidar points from Terrascan format files Made the Search by Name and Search by Attributes dialogs show a bullseye on the map when you double click on a search result Made running script files that make changes to the main view automatically update
292. m a gm_layout file with the MAP_LAYOUT command Added support for defining a layer style from a gm_layer_style file with the DEFINE LAYER STYLE command Added option to require one or more attributes to have equal values when copying attributes between features with the COPY_ATTRS command Add EQUAL_ATTR parameters for each attribute that must be equal Support disabling showing warnings when no layers are unloaded with the UNLOAD_LAYER script command by adding SHOW_WARNINGSE NO to the command Fixed bug with failure to write workspace when calling SAVE_WORKSPACE to the same gmw file multiple times within a script Made UNLOAD_LAYER work with hidden layers Broken since v15 2 0 Allow providing a default value for DEFINE_VAR when getting the variable value from a feature attribute e Projection Datum Changes O Added support for providing a default projection to use when starting the application or unloading everything If you define a projection in a startup prj file in either the install folder or the User Settings file list on Help gt About that projection will be automatically selected at application start or when you unload everything Sped up change of projection for layers covering a large part of the earth on multi core systems Added built in AMG Australian Map Grid projection so the correct projection name could be used for AGD66 AGD84 based projections rather than MGA Improved display of Transverse Mercator based pro
293. mat files Added support for loading MapMaker Drawing DRA format files Added support for loading LMN Spectra Line Management Node files Added support for loading GSD Swedish DEM Grid format files Added support for loading BAG Bathymetric Attributed Grid files Added support for loading FCC ASR Antenna Registration System data files Added support for loading Japanese DEMs in LEM CSV format Added support for loading Garmin TCX Training Center Database files Added support for loading CXF Italian Cadastral Format files Added support for exporting loaded point and line data to UKOOA P1 90 format files Added support for exporting loaded vector data to Lowrance LCM format files for display on Lowrance GPS devices Added support for exporting loaded elevation data to Vertical Mapper MapInfo Grid format files Added support for exporting loaded data to tiles for displaying on the web with Zoomify use File gt Export Web Formats gt Export Zoomify menu command Added option to import features from ASCII text files using the Well Known Text WKT format for storing feature geometry Image Rectification Enhancements O Added checkboxes to allow easily turning individual control points on and off to see how it affects the rectification Added an optional crosshair display traversing the entire zoomed and reference image views O Added dynamic cursor location display for reference image view Added display of the se
294. matic detection of grid cell registration type i e pixel is point or pixel is area for netCDF grids like those created using GMT When generating Simple ASCII Text files from a script using the EXPORT_VECTOR command allow specification of attribute export except for style attributes by using the parameter EXPORT_ATTRS NO_STYLE When importing files from a script workspace warn the user if a file does not exist Improved detection of invalid void values for elevation GeoTIFF files that use very large negative numbers for invalid values and the files do not contain any valid data Added support for loading palettes from Idrisi SMP files Added option to make background pixels transparent when batch converting to raster KMZ files Added option to generate 8 bit palette based PNG files when batch converting to raster KMZ files Added automatic detection and correction of incorrect State Plane zone encodings in some aux files such as those produced by a New York imagery site Fixed problem reading the timestamp for tracklog points from GPX files that are on the 31st day of a month Fixed problem with TriangulationLib dll files sometimes not being installed by auto downloading them if needed Fixed rare error loading some DNC data sets When importing ASCII data files automatically detect lines with a series of 999 0 values and allow the user to treat these as feature separator lines rather than coordinates Sped up import of GML files
295. me other text string Made advanced option to snap export to pixel boundary if possible also be applied when exporting from a script If grid lines are enabled make them export from a script using the EXPORT_PDF and EXPORT_VECTOR commands unless you specify SAVE_GRID_LINES NO as a parameter Allow export to scale for PDF export using EXPORT_SCALE parameter for EXPORT_PDF command Added advanced option for ECW export using EXPORT_RASTER to allow embedding the 4 color band of input layers as the alpha channel value Add USE_BAND4_AS_ALPHA YES parameter to enable this functionality Fixed export of fixed screen position layers like watermarks to work even if the layer hasn t already been rendered or exported e Added right click option on feature vertices dialog to allow providing offset and scale factors for selected elevation values Fixed problems using some ECW files Added option to add a title to the elevation legend Added option to customize the elevation range shown on the elevation legend new option when you right click on the elevation legend Added option to disable map layout text items without deleting them The Map Layout dialog now has checkboxes next to each text item Update north arrow controls in Map Layout to be a checkbox to turn on and off rather than using the special No Symbol selection to control this Added option to Shapefile export to include style attributes like the area line or point draw style
296. menu to the right click popup menu for the Digitizer Tool when one or more area features is selected This new menu has options for selecting all point and area features within the selected area s making it easy to select and edit features within a particular area Added option to the Digitizer Tool to allow creating new line features from the boundaries of selected area features Added option to the Digitizer Tool to allow creating new line features from the boundaries of selected area features When placing new range ring features with the Digitizer Tool make the range ring center snap to existing features just like line area and point features do when drawing them You can hold down Ctrl when placing the range ring to disable snapping When adding areas as islands to existing features with the Digitizer Tool prompt the user for whether or not the original areas should be marked as deleted Previously the original areas were always marked as deleted but this is not always desired e Export Changes O Greatly sped up exports to numerous binary formats including Shapefiles Global Mapper Grid files and Surfer Grid files especially when exporting to a network drive Added option when gridding data on export to have the column name be first and then the row name in the generated filename rather than the default of row name first then column name Added option when gridding data on export to turn off the prepending of zeroes to num
297. mes in the Overlay Control Center be displayed with the same casing as they have on disk rather than always being all upper case Added new option to the Advanced section of the General tab of the Configuration dialog to allow users to specify that the default export folder should be the folder of the first loaded file rather than the last exported to folder Added new option to the Advanced section of the General tab of the Configuration dialog to specify that lines in generated world files should be separated with CR LF carriage return and line feed characters rather than just a LF line feed character Updated GNIS files to use the NAD83 datum as the USGS switched to that in 2005 In addition GNIS files that use meters for elevation values will also handle those correctly and less error messages will be shown for GNIS files Allowed clearances greater than 100 of the first Fresnel zone to be checked when performing line of sight and view shed analysis Made the minimum clearance display for line of sight analysis display in the currently selected Position Display Format if the From and To locations are also displayed using it Fixed problem with the per vertex elevation list for 3D area and line features not being maintained when copying and pasting those features Fixed problems with loaded data from some VPF data sets with only one tile of data namely UVMAP3 data Fixed memory leak when generating an elevation grid from some loaded
298. ming ASTER GDEM v1 data set Added built in link for NSF OpenTopography online source which catalogs freely available Lidar data worldwide Updated NAIP source to new server URL and made workspaces that reference the old NAIP URL automatically update to point to the new server Fixed crash in v15 2 0 v15 2 2 when trying to remove a user WMS source e Format Specific Changes O Made layer selection for PDF import be a tree control to match how Acrobat displays the layers and make it easier to enable disable entire groups of layers Added option to Shapefile export to include the sides and bottom of extruded 3D areas as additional 3D area features in the export Improved loading of multi part 3D areas with Z values There were problems with things like the sides of buildings being treated as islands holes in the top Added recognition of additional types from OSM XML files as the proper Global Mapper type Improved import of building areas from OSM XML files They should all come in as areas now and also will be marked to extrude and treat heights as relative to ground Additional improvements to Wasp map export to prevent cross point errors in Wasp Added support for specifying what Z value is treated as the no data void value when loading ASCII files with the 3 coordinate value treated as the Z elevation value This allows no data values other than the default of 999999 0 Added option to control whether useserver or netecm is
299. n t show the label in one of the islands e Added option to export area features as track lines when exporting GPX files WHAT S NEW IN Global Mapper v14 0 e Significant New Features o Added support for spatial databases see list below for both import and export ESRI ArcSDE requires ESRI license on machine and 32 bit only ESRI File Geodatabase includes raster and grid and all versions of file geodatabses requires ESRI license on machine and 32 bit only ESRI Personal Geodatabase requires ESRI license on machine and 32 bit only MySQL Spatial Oracle Spatial PostGIS PostgreSQL SpatiaLite SQLite o Added new Terrain Analysis menu and moved functionality like contour generation combine terrains and watershed there from the File menu o Added option to calculate the volume between 2 terrain surfaces on the new Terrain Analysis menu o Added option to find ridge lines on loaded terrain data on the new Terrain Analysis menu o Added new Favorites toolbar that provides easy access to frequently used Digitizer Edit Tool options The new toolbar automatically tracks which features you commonly uses and makes some of those available You can also customize it and choose which options to always make available The currently selected favorite can be run by pressing a button or using the Ctrl Enter shortcut key You can also setup custom keyboard shortcuts for any favorite item o Reorganized Digitizer Tool right click m
300. n dialog is set to Statute ft Fixed problem batch converting to GeoTIFF files using a min is black or min is white palette Added options to Erdas Imagine export to control the block size whether or not compression is used and whether or not to add overview pyramid layers Added progress bar for lengthy area volume calculations Made Surfer BLN files be automatically detected and imported with no user intervention Made Delft 3D ldb files be automatically detected and imported with no user intervention Added support for reading place point features from OpenStreetMap OSM files Fixed problem with attribute display in Search by Attributes dialog when loading new files with the dialog open Added new line drawing style Solid with Black Edges Fixed bug in v10 00 which caused vector features to not be selectable if any fixed screen position layers that are set to always draw on top are loaded Modified the bearing display in Global Mapper to be based on the Position Display Format selection on the General tab of the Configuration dialog So if you have that set to DMS your bearings should show up that way as well Added support for MPR MPH files larger than 2GB Reduce memory requirements for loading large ENVI DEM format files Fixed problem in v10 00 release with users being prompted to confirm projection for NAD83 based projections from old style PRJ files or prj adf files Added support for loading truncated Lidar LAS
301. n the custom HTML text for the point description Updated search and replace of road name text to automatically detect iconized road names Added support for decoding Transverse Mercator projections from BSB files Improved type mapping when exporting MP files or any features with a MP_TYPE attribute to the OSM XML format When splitting area features at selected vertices create the new areas in the same layer as the original Corrected point record size written out to exported Lidar LAS files this was incorrect in v11 02 Improved display of some TEXT entities loaded from DXF files to have the correct orientation and color Fixed incorrect export of 3D area features to DXF files Added option to control whether or not LAYER attribute is added to exported MapInfo files when doing a batch conversion Added support for grades as a bearing measurement unit in the Measure Tool Added Yes to All and No to All option for loading files where a projection is guessed based on the filename and the user is asked to confirm Fixed export of non closed 3D areas to vector KML KMZ files Added shortcut key Shift C for File gt Capture Screen Contents to Image menu item Append the classification name of a feature to the text displayed in the status bar when the cursor is over the feature if it is different than the description Updated Full View Home to use the cropped rather than full bounds of loaded layers Fixed custom band setup for Erda
302. n a different projection than the current view projection when not also rotating them Fixed issue with duplicate lines being created when creating area skeleton lines Fixed issue with point attributes not copying properly to Voronoi Theissen polygons When digitizing allow snapping to the first point of a line or area feature that is being digitized Updated combine of line features to prefer the choice of line to connect to that maintains the original direction of both lines if possible over an option that requires a reversal Updated the addition of per vertex elevations to selected features to always pull from the most detailed layer of loaded grid sources and never overview layers Restored option to select only those areas whose centroid is within a selected area Allow splitting a line into separate features when multiple vertices are selected Added support for providing bearings as mils6400 for distance bearing COGO lines and for offsetting features by a fixed distance and bearing Fixed bug in v14 1 that caused splitting an area against a selected line to only keep half of it When combining lines that don t connect within the specified distance threshold if a single end point of each line is selected combine between those 2 end points rather than at the shortest connection Fixed bug in v14 1 when selecting areas in other areas by centroid only that caused areas whose centroid is outside the area to not be selected Fixed bug
303. n feet units on Alter Elevations tab of the raster Options dialog when pressing the Apply button Fixed export bug when using blend modes and transparency at the same time When rectifying made holding down the CTRL key and right clicking in either the zoomed or reference map views zoom the clicked view out to the full extents of the available data When rectifying made holding down the SHIFT key when left clicking in the reference map view with a lat lon projection in arc degrees clamp to the nearest 30 second interval rather than the nearest 1 minute interval Fixed error in polyline flags for 3D area features exported to DXF files Made the correct elevation for 3D point features imported from DXF block entities be used Made HATCH and SOLID entities be loaded from DXF files Allowed loading of RPF i e CADRG CIB etc files with absolute file paths Added support for using positioning and projection information from Fugawi JPR files Added support for loading multi patch Shapefiles Added support for providing offset and scale values for STL export Added option when printing to specify an extra margin This is useful when printing to things like a PDF file that do not have any natural margins Fixed problem with label settings not being saved toworkspace files when changing the label attribute of Shapefiles to lt No Name Field gt Removed error about bad OziExplorer map format when loading MapInfo tab files from which the proj
304. n selected lines with the Digitizer Tool This provides an easy method of identifying connectivity problems in loaded data o Fixed creation of duplicate attributes when editing multiple features at a time with the Digitizer Tool and adding a new attribute which already exists in some of the features being edited o Added option to measure cut and fill volumes to the right click menu when a single line or area feature is selected New Supported Import Export Formats o Added support for exporting loaded vector data to Lowrance USR format files for use in Lowrance GPS devices Added support for loading LIDAR data from TerraScan bin and ts format files Added option to print to Geo TIFF format files Added ability to batch convert to Global Mapper Package files o Added support for exporting loaded elevation data to Optimi Terrain format files Projection Datum Unit Changes O O O o Vastly improved accuracy of RT90 Sweden datum transformations o Added Indonesia 1974 and Bukit Rimpah datums o Added support for using the French angular unit grades with the Geographic projection o Fixed rare problems projecting between a State Plane projection and a Lambert Conformal Conic projection o Fixed loading of Erdas Imagine img files with embedded projection information This was broken in the v7 01 release o Added support for loading and saving Southern Transverse Mercator projections in ECW files o Added support for using projec
305. n switching back to default mode if on a Tablet PC device Allow display of multiple path profile line of sight dialogs from selected lines Also made those dialogs created with the Digitizer Edit Tool be modeless so you can zoom and pan around the map while they are open Updated distance bearing COGO line entry so that if you have the distance bearing COGO dialog up and you click on the map while in the default distance bearing mode the distance and bearing from the last point to where you O clicked is pre filled for easy editing Added option to select area features that contain the selected point feature s to the Advanced Selection submenu of the Digitizer Tool when points are selected Added option when right clicking on a map from a map catalog with the Digitizer Edit Tool active to remove that map from the map catalog Updated projection of point along a distance and bearing to use more accurate Vincenty formula so that distances should match exactly Added option when creating buffer areas to specify the buffer distance via an attribute of the feature and to also specify the area type to assign to the new buffer areas Added dot at location of first vertex to be created for an area or line feature so you can see where it will snap to Dramatically sped up the creation of buffers around very complex shapes in some cases Fixed issue creating buffer areas when the current view datum is different than the native datum for the feature
306. n the Control Center by their type i e elevation layers first then raster layers and finally vector layers Updated Anuga Mesh import to use geo referencing from file to properly position coordinates Improved results of auto interpolation during raster exports particularly way undersampled or web based exports Updated creation of range rings and arc areas of a fixed radius to start the feature relative to magnetic north rather than true north if that option is selected in the Measure Tool Added option to rotate feature dialog to allow rotating around the center of each individual feature center rather than around the center of the total bounding box of all features Fixed issues with files rotated 90 180 and 270 degrees with a world file Made Restore Default Settings button on General tab of the Configuration dialog also restore all elevation shader options When editing the symbol multiple points with rotation or scaling applied maintain the original rotation and scaling for each point unless those values are explicitly changed When editing strike and dip points don t change the default strike and dip symbol for when new strike and dip points are being created Added button to feature vertices dialog to allow updating the existing per vertex elevation values based on loaded terrain data Fixed bug exporting Lowrance LCM maps that caused many point types to come out as cities rather than the proper type like a navaid Update
307. nal surveys for each well come in as separate lines and you can better visualize the entire well path in the 3D viewer Added Attribute Setup tab to Shapefile export to allow customizing exported attribute types and lengths You can now load KML files that reference local imagery lt GroundOverlay gt tags and those will load like a map catalog with the bounds of each image shown until you zoom in Added support for positioning rotated images from KML files that use the gx LatLonQuad tag of a lt GroundOverlay gt to provide the corner coordinates Re enabled support for loading KML files that are marked as UTF 8 but have improperly encoded characters internally Fixed Wasp Map export problems with cross point and other others due to overlapping or touching roughness areas Added support for loading Parcels from LandXML files Further rendering improvements for complex DXF DWG files including fixing problems with lines that are too wide and better support for multi line text Made DWG exports of 2D line features create 2D polylines rather than 3D polylines Improved quality of CADRG exports when vector data is included in the export Updated Geographix CDF import to add attributes for PLSS and Texas Land Survey System attributes in B records Updated Geographix CDF export to include PLSS survey information in export B records for survey section areas When exporting to Platte River dat files don t add 0 to township and ran
308. nce symbol be remembered when importing a Lowrance USR file and exporting to a new USR file Significantly reduced or removed visual seams between elevation layer tiles in map catalogs and from online sources Fixed issues with area features from some DGN files coming in as lines Added some support for parsing tables of attributes in KML feature descriptions into separate attribute values in Global Mapper Fixed loading of SEG P1 files that uses decimal lat lon coordinates rather than DMS coordinates Fixed loading of some line styles from DGN files Split raster maps that cross the anti meridian into 2 separate pieces when batch converting to a lat lon projection like for KMZ export Corrected view shed calculation when a range of transmission angles are provided Fixed problems with some attributes from some DGN files not being properly assigned Fixed export of HF2 HFZ files with fractional units like centimeters Updated feature vertex display dialog to show lat lon coordinates using the current Position Display Format setting rather than always showing decimal degrees Added right click menu option to feature vertex dialog allowing you to easily spread the elevation values along the vertices of a feature to achieve a constant slope between the first and last point e Added right click menu options to feature vertex dialog allowing you to add per vertex times and editing existing time speed values for each segment of a line feature
309. nches from edge values When specify custom crop bounds for a raster layer allow control of which sides will be cropped through check boxes activating which edges to actually crop The default is all edges Added a new Hill Shading Shadow Darkness control to the Vertical Options tab of the Configuration dialog This control allows you to control the maximum darkness of shadows the default is black With this setting you can cause the shadowing to be capped in high relief areas thus allowing the use of other controls to better bring out detail in low relief areas Added support for drawing the location for a connected GPS device as a circle or O O O 0 transparent triangle with a dot at the center for the GPS location This support is provided by the new GPS gt Vessel Shape submenu e Added option to DXF vector export to allow elevation values from loaded elevation layers to be used as the Z coordinate for exported vertices if available e Added option to DXF vector export to allow coordinate values to be written out as ECEF earth centered earth fixed coordinates rather than in the current selected projection e Added support for performing batch geocode operations from data files using currently loaded road data Previously batch geocoding was limited to the US using an online geocoder With this new feature geocoding can be done using load and properly attributed road data along with input address data split into appropriate fields
310. nd exporting data to MS SQL Server Spatial databases The spatial database import and export dialogs now have an option for MS SQL Server o Updated the Raster Calculator to support calculations from elevation grid layers You can now apply any custom formula to loaded terrain layers to create a new terrain layer The layer may actually be a grid of other non elevation values like NDVI values etc so this opens up an entirely new set of analysis possibilities o Dramatically sped up raster elevation exports cropped to complex area features For very complex areas i e hundreds or thousands of vertices the exports may be 10x as fast or even better o Added built in links several online sources including all NASA GIBS Global Imagery Browse sources Landsat8 imagery and Lidar data from the USGS EarthExplorer web site and GlobCover ESA2009 Land Cover data o Added Attribute Setup tab to Shapefile export to allow customizing exported attribute types and lengths o Added option to generate contour lines directly from 3D TIN areas This allows you to exactly maintain breaklines or other 3D features when you have a 3D TIN including those such as you might save from the gridding process There is a new Analysis menu command for generating contours from TIN areas o Added option to 3D Path Profile to display the path from each terrain layer separately This allows easily comparing the surface of multiple loaded terrain layers along a path The new o
311. ng the user from having to continually resize it to get the size they want for different path profiles Added option to the Vector Display tab of the Configuration dialog to allow an arrow to be drawn along line features in the direction that they travel Fixed scaling problem when exporting vector data to a raster file using the EXPORT_RASTER command from a script file Made custom symbols from ico files draw in their actual size instead of always using the default system size of 32x32 Added new built in point symbol Dot Yellow Fixed problems loading some GPS TrackMaker files that have no waypoints in them Made degree symbols display correctly on Asian versions of Windows that weren t fixed in the earlier update Fixed problems with render progress on status bar not working properly with map catalog files Fixed problems with some maps that result in multiple layers like ADRG files in map catalogs Allowed custom per layer shaders to work properly with map catalogs containing elevation data Fixed problems with some iso height area contours not being generated in some rare cases when generating contours Fixed loading of package files containing elevation data from workspaces Fixed occasional problems with missing outer row and or column of data when exporting a raster or elevation file and cropping to a selected rectangular area feature Fixed problems with elevation shading and display of the elevation legend when neg
312. ng read from generic ASCII files properly Fixed errors rendering ECW and JPEG2000 files to monitors with extremely high resolutions typically multi monitor setups Added option to Help menu to disable the automatic check for updates at application startup Made it possible to batch convert from ASCII text files like XYZ to gridded elevation formats Fixed bug in batch conversion that caused the horizontal extents of raster or gridded elevation data exported using a custom spacing to be incorrect in some situations Also fixed problem with an extra column and or row being exported when the custom spacing option was used Added attributes for database linkages to loaded DGN files Improved the handling of break lines imported from DMDF format files Fixed problems loading some Garmin PCXS files Added new File menu commands to the rectification dialog to allow loading control points and projection information from CompeGPS imp and Touratech TTQV cal files Added option to specify offset and scale values to apply to coordinates loaded from EMF format files No longer save the Render Areas Render Lines Render Points and Render Area and Line Vertices options from the Vector Display tab of the Configuration dialog between runs as this tends to cause confusion The first three will always be enabled by default when you start Global Mapper and the vertex display will now always be disabled by default Corrected positioning of ENVI
313. ng segments are split at the correct distance Made the option to Move selected features always be on the top level right click menu Updated to add a DIST_FROM_LINE attribute to the points when creating lines connecting selected points to the nearest lines Updated the option to create a single vertex list from areas with islands to have an option to split the area into smaller pieces until no islands are needed rather than connecting the islands with invisible lines that create invalid areas Also added the option to the Crop Combine Split submenu Greatly improved the speed of the select areas in other areas option when doing the partial overlap allowed check Also removed the centroid check option as it is not needed with the partial check now being just as fast Added new option to right click Analysis menu to force selected 3D line features typically streams to flow downhill This will modify the elevation values for vertices that don t obey the downhill rule and potentially reverse the direction of O a line When creating points at the vertices of selected area line features add a VTX_NUM attribute to the created points with the vertex index from the original feature When creating points at the vertices of selected area line features and one or more vertices are selected prompt the user for whether or not to only create new points at the selected vertices Added option to remove the per vertex elevation lists for 3
314. nk line o Fixed problem using SET_BG_COLOR in scripts called from the command line Made the area covered by the bounding box of a layer be reported as part of the metadata for that layer For BIL and Erdas Imagine elevation exports if all of the input files use the same NODATA value use that rather than the default of 9999 0 for the NODATA value for the export Fixed problem loading complex shapes from older pre v8 DGN files This problem was introduced in the v7 04 release Improved decoding and encoding of some Lambert based projections with default units of feet with ECW files Fixed garbled display of some rare ASRP ADRG USRP format maps Fixed problem with features being duplicating when copying and pasting selected features from multiple data layers at a time Made blending and translucency between layers within a map catalog work properly Fixed display of selected features when dragging a map to pan Made nearby point locations be snapped to when selecting the transmitter location for view shed analysis Fixed problem with scale bar being cut off when printing to scale with a footer string Fixed problem in v8 03 with some features in the a User Created Features layer not responding to the show hide checkbox in the Overlay Control Center Fixed problems loading area and line features with more than about 200 000 vertices from Polish MP format files Increased precision of angular coordinates like arc degrees written to text fi
315. ns dialog for layer in v15 2 0 v15 2 4 o Fixed issue with elevation legend showing coloring for wrong range when the topmost layer uses a custom layer shader that is also the same as the shared shader o Fixed issue with custom vector symbols scaled to a fixed height in meters not always drawing Made the Configuration Options and Metadata dialogs be resizable Allow canceling a long search on the search dialog Support saving a workspace when no data is loaded allowing the save of just the projection and map layout settings in a workspace Added support for forcing a filename passed on the command line including gmw to be run in an existing instance of GM if possible rather than starting a new instance Just add existing to the command line If you load a workspace in an existing instance you can also add no_prompt to the command line to indicate that the unload all prompt at the beginning is skipped and the workspace should just be loaded on top of the already loaded data When calculating attributes using a numeric operation like addition subtraction or division treat monetary values with a at the front of the attribute as numbers Added new Tree point type Support using a feature display label or layer name for an elevation attribute When splitting a layer by attributes and the description of the layer has been customized make the new layer names use the customized layer name and not the original one Fixed modifica
316. nt features in selected area to be able to count lines that are partially inside the area rather than just those that are completely inside the area Updated add of coordinate attributes for line and area features to add a BOUNDS attribute with the bounding box Updated creation of line features from selected islands holes in areas to assign the parent area attributes to the new lines and also add an ISLAND Y attribute Updated creation of regular grid of features to all creating point features at the grid cell centers Added support for resampling selected line features at a fixed percentage of the length rather than a fixed distance along the line When create points from the vertices of selected features add the feature name as an AREA_NAME or LINE_NAME attribute to the created points Added right click menu for layer selection box on feature edit dialog to allow controlling whether the group name for a layer is pre pended or appended to the layer name Made enclosed area and length perimeter for rectangular or circular areas and lines be displayed in the status bar as the features are drawn with the Digitizer Tool Added Insert Vertex option to top level right click menu of Digitizer Tool when vertex display is enabled Fixed issue in v15 2 0 v15 2 6 with new area features added to a layer loaded from a file being lost if you save to a workspace and then load that workspace back in Fixed error in v15 2 0 v15 2 5 creating buffers on one s
317. o DXF files generated 3D face features rather than 3D polylines WHAT S NEW IN Global Mapper v10 02 e Significant New Features O Added ability to easily create strike and dip points by right clicking in the Digitizer Tool You can now place your strike and dip points and specify the dip value azimuth angle and symbol to use and get the appropriate symbology displayed on the map Added support for adding custom area fill styles from image files New fill styles can be added on the Area Styles tab of the Configuration dialog Added support for rotating point symbols by a user specified angle This option is on the Point Styles tab of the Configuration dialog as well as on the edit dialogs for point features Added option to the Digitizer Tool to calculate the minimum maximum and average elevation values within selected area features Added support for specifying that lines should draw a particular number of meters in width Line width selections on the Line Styles tab of the Configuration dialog and anywhere else that you setup a line drawing style now include an option to specify a fixed width in meters for the line Added new input option to distance bearing COGO input for lines to allow one handed input using the number pad with either quadrant bearing distance input or distance bearing input Also added support for entering DM or DMS bearings as decimal values like 40 3020 for 40 degrees 30 minutes and 20 seconds Added new righ
318. o choose exactly which attributes are required to match Updated combine of area to work properly when some of the areas have islands holes Also added a progress bar to the operation when there are lots of areas being combined Updated combine of 3D area features to keep the per vertex elevations of the original areas Added new items under Options submenu to allow easily control whether areas lines and points are selectable Updated the option to crop any loaded features to selected areas to have an option to cut away what is inside the selected areas rather than what is outside of them Updated the option to crop any loaded features to selected areas to crop features properly to areas with islands holes in them Added option to set the text color for any selected features with labels to the right click Attribute Style menu Added option to specify a simplification threshold for elevations for simplifying selected area line features To do so simply provide a space and the Z threshold in meters after the normal threshold like 2 10 to simplify to 2 meters horizontally and 10 meters vertically Added option to control whether or not original vertices are kept when resampling selecting area line features at some fixed distance interval If you uncheck it you will just have the vertices at the new spacing Updated the resampling of area line features to use the ellipsoidal distance along segments rather than the grid distance so that lo
319. o reverse the color order of the selected shader previously only the HSV shader was reversible e Added support for reading the track style information written to GPX files by the ExpertGPS software application e Added new right click option to the Feature Info dialog to allowing easily zooming to the extents of the selected feature e When an elevation legend is displayed make selecting the View gt Full View menu command zoom the map so that the elevation legend does not obscure any of the loaded data e When editing existing elevation values on the custom shader dialog edit the value in the selected elevation units rather than always in meters e When digitizing new point features display the distance from the last digitized point to the current cursor position in the status bar e Added option to the Vector Display tab of the Configuration dialog to allow drawing dots at line endpoint locations this is a subset of the existing option to display all area and line vertices e Fixed problem that prevented the description of the User Created Features layer from being modified in some situations e Fixed bug with enabling transparent colors for gridded elevation maps that made them O disappear in some cases Added support for parsing coordinate values that use commas rather than periods for the decimal separator character When exporting new Polish MP format files check the default attribute list for the type of a feature if the
320. ocation of a single vertex from a 3D line or area feature using the Digitizer Tool Added options when gridding exports to break each row or column if naming is reversed into its own folder as well as an option to not place an underscore between each piece of the export filename Improved decoding of waypoints from GPS TrackMaker gtm files An appropriate symbol should now be assigned if possible and the correct naming is now used Don t use EXIF information from JPG files if you open the files with the File gt Rectify Imagery menu command to force rectification Fixed crash when loading Terrascan bin files from v10 01 release Added new Ctrl Shift D shortcut key to toggle the display of deleted features Allow initialization of custom shaders from other custom shaders in addition to the Global Shader and also added option to re base and offset the elevation values used in a shader Fixed problems with labels for very short lines not showing when zoomed way out on them Reduced memory requirements for loading Helava DEM format files Fixed color problems with CMYK encoded JPG files from Adobe Photoshop Fixed problem generating iso height contour areas in some rare situations Added a new option when batch converting to Float Grid format files to export slope values rather than elevations Updated the DXF export to use the Elevation Display Export Units setting on the Vertical Options tab of the Configuration dialog to determine whether
321. ocus in the one of the coordinate windows then focus will advance to the next coordinate field Pressing Enter with focus in the Y northing latitude field will just add the control point Added new right click option to the Control Center allowing you to scale a selected layer based on a user specified length of a selected line feature in that layer This is useful if you know the actual length of a line feature in a vector layer and want to scale the layer so that the line length is correct without caring about where on the earth the layer is placed Added new right click option to the Control Center to allow opening Windows Explorer to the folder that a selected map file is in Added new Combine Terrain operations to filter and keep the first layer value when it is greater than the second layer value and also less than the second layer value When selecting two vertices of a single line feature with the Digitizer Tool the status bar will list the length of the line between the two selected vertices Made creating areas from line features maintain the per vertex elevations of the connected lines if there were any Fixed behavior of water level controls on the 3D view options dialog Restored old 3D view behavior of going behind main window and having separate button on Windows start bar Fixed flicker of main view when moving your cursor over a 3D path profile Improved accuracy of affine and triangulated rectification operations Signific
322. oesn t act as a field delimeter When loading generic ASCII text files and using column names from the first line of the file as attribute names don t include attributes from non coordinates lines Fixed problem introduced in v7 02 release with saving Transverse Mercator projections to ECW files the projection name was not being saved for some users Allowed view shed calculations to have a radius as small as one thousandth or a mile or kilometer rather than the previous minimum of one tenth of a mile or kilometer Fixed some printing issues and improved printing performance when printing to large paper sizes Added a registry key to allow specifying that positioning information from TIFF world files if available should be preferred over the positioning data stored within TIFF file headers If you create a HKEY_CURRENT_USER Software GlobalMapper TIFFPreferTFW DWORD value with the value set to 1 then the world file positions will be preferred Added support for reading and writing oblique stereographic projections from to GeoTIFF files Added support for reading and writing Gauss Krueger 6 degree zones projections using the Pulkovo 1942 datum from to GeoTIFF files Added support for reading and writing the Potsdam DHDN datum from to GeoTIFF files as well as Gauss Krueger Germany 3 degree zones projections with that datum Added checkbox to the ASCII import file to allow using the same configuration for all files during that load or
323. of elevation units to feet when exporting to a new vector format with S 57 ENC data as the input Corrected application of contrast adjustment to NITF imagery layers that use embedded JPEG2000 files Made the feature measurement dialog resizable Fixed problems with some DGN areas being filled that shouldn t be Made changing the projection for multiple layers at a time using the Projection tab of the Options dialog for the layers work for more than the first selected layer Added advanced option to create world files for each exported tile when doing a WorldWind export Fixed bug in Digitizer Edit Tool with splitting lines into separate features for each line segment that caused not all of the lines to be split Added support for loading Geosoft LUT and TBL palette files Fixed issue with main map not redrawing when double clicking on a file in the file open dialog to open it Apply scale factor to values extracted from NetCDF files that include that like some gravity grid files Made any vertices selected on the map also be selected initially when opening a vertex dialog on that feature from the Feature Info or Digitizer Tools Fixed problems loading some GRIB format files Made most GRIB data sets come in as elevation grids rather than rasterized and scaled grayscale data Made version attribute be maintained when importing OSM XML data Made area translucency fixed width lines and fixed height symbols be saved properly to SV
324. of layers loaded Don t attempt to load DBF files from archive zip etc files if they don t have obvious positioning fields in them In the location selection dialog made the Latitude and Longitude fields initialize with the coordinates formatted according to the currently selected position display format Also swapped the fields so that the Latitude is on top Made the elevation readout on the status bar display up to 3 digits beyond the decimal rather than just 1 Made DEM files exported with the Geographic Lat Lon projection write out full elevation profiles for every column even if there are invalid data values at the beginning and or end of the profile This is to ensure compatibility with other software Added support for the user providing an explicit format and or projection to use in the service name string when adding a new WMS data source For example if a data source is available in both JPG and PNG formats and you want to get the JPG data use a service name of WMS amp format image jpeg when adding the data source Use the SRS parameter to explicitly select a projection to use e Added support for specifying extra WMS parameters like map in the Server URL when creating a new WMS source This allows you to now have parameters after a question mark be used rather than ignored e Added new right click option to the Measure Tool to specify that no unit labels like m or ft should be appended to the measure attributes ad
325. of the background color but was set to last valid encountered value in v14 2 Added display of current loaded and selected layer count on the title bar of the Control Center Updated option to create polygonal coverages for selected layers from the Control Center to work for map catalog layers as well Rather than just creating bounding box areas for each map in the catalog it will now load and create coverage polygons for each map e Play a sound when lengthy operations i e 5 minutes or longer complete This provides a way to notice a long operation is done without switching back to the program e Fixed bug with extra period being inserted in some filenames on export when you don t explicitly enter the extension to use e Added support for connecting to GPS devices at 300 1200 and 2400 baud e Smoothed out some sharp edges in vector data when transforming with a coordinate transformation file with more than 4 control points e Fixed batch conversions to multi band imagery formats when the Use Other Source Files as Filler option is checked e Added support for new text alignments that align text with the baseline of text rather than the middle of text This is not automatically used when loading DXF DWG files that specify that alignment e Fixed problems with creation of coverage areas for some data sets WHAT S NEW IN Global Mapper v14 2 e Significant New Features o Updated option to Measure Volume Between Surfaces to suppor
326. og so that moving features to a new layer doesn t reset the sort and column sizes e Added option to default GeoTIFF export to use no compression to the Advanced section of the General tab of the Configuration dialog e Added option to the GeoTIFF export dialog to disable the writing of GeoTIFF header information to the generated file This is useful for using things like datum specializations that can t be exactly stored in GeoTIFF files so you d rather just use a PRJ file and not have anything in the GeoTIFF file e Updated SEGP1 import to default to feet for the elevation units if statute is selected for the elevation display export units on the Vertical Options tab of the Configuration dialog e Added option to the Vector Display tab of the Configuration dialog to set the default character set for fonts to allow easily switching default fonts to a non Western European character set e Made export of distance Z file from path profile dialog work properly when a non zero base distance is specified WHAT S NEW IN Global Mapper v12 02 e Significant New Features o Added built in access to additional online Worldwide Imagery Street Maps MapQuest OSM Street Maps and Topo Maps using the File gt Download Online Imagery Data menu command o Added new MapMart On Demand premium data source to the File gt Download Online Imagery Data menu command This source provides easy access to the large library of data sets that MapMart com provides
327. ologic Maps just added automatically show that legend image as a separate layer Added option when setting up the zoom scale display of loaded maps or map catalogs to display maps within a range of percentages rather than just always over a certain percent Add support for randomizing colors assigned when initializing attribute based styling from existing attribute values on the Style tabs of the Options dialog for a layer Updated Global Mapper Package export dialog to replace Terraserver USA MSRMaps com export resolution option with one that works for any online layer allowing you to export online layers to GMP files is a much more convenient manner Added support for loading DigitalGlobe imagery from their WCS server e New Supported Formats O O O 0 0 O Added support for loading LogASCII Standard wellbore log format Added support for exporting loaded vector data to SOSI Norwegian format files Added support for loading PCI Geomatics PIX imagery format files Added support for additional GRIB2 format data sets such as weather products Added support for NDVI Normalized Difference Vegetation Index data in HDFS5 format Added support for VIIRS data in HDF5 format Added support for exporting loaded data to PCX image files O O O Added support for loading waypoints from EasyGPS loc format files Added support for initializing custom shaders from Hypack HCF files Added option to export multi band imagery to XY Color Tex
328. olor encoding to generate 2 3 times better compression at the same quality than the previous settings e New Supported Formats O O O O O 0 0 Added support for new MrSID MG4 raster files including support for multi spectral MrSID images and MrSID images with an alpha channel for transparency Added support for exporting loaded data to BSB Marine Chart format files Added support for loading HRE High Resolution Elevation data files Added support for loading ACE2 global elevation data set Added support for loading WindSim gws files with terrain and roughness data Added support for Lowrance SL2 CSV files Added support for exporting loaded terrain and roughness grid files to WindSim gws format files Added support for exporting loaded line and point features to Orca XML obstacle files Added support for additional PDS format imagery files including automatic support for positioning polar data from the moon e Projection Datum Changes O O O Added support for supplying a rotation angle about the origin for some projections like Transverse Mercator and Orthographic to facilitate setting up rotated local grid projections Added new Swedish Grid SWEREF99 built in projection with all SWEREF99 projections used in Sweden available as zones Added new built in Mercator Navionics Special and Mercator Lowrance Special projections to represent the custom Mercator projections used by Lowrance and Navionics Added Amer
329. ols allowing you to change of existing point symbols either by some fixed percentage or to make them a fixed number of O meters in height on the display Updated vector exports that are cropped to a selected area to actually crop the line and area features being exported to the selected area Added new option to display a whitened highlight area in terrain areas that are getting direct sunlight The amount of whitening can be controlled on the Vertical Options tab of the Configuration dialog Added new option to vector KML KMZ export to generate an index KML file This can help manage large collections of vector KML files that would otherwise overwhelm Google Earth Added support for averaging your GPS position to create a more accurate waypoint when tracking a connected GPS device Added new Search gt Search and Replace menu option to allow easily searching for a particular text item and replacing that with a new value including appending or pre pending text to existing values Prompt users for location of missing files when loading workspaces rather than just skipping the load of those files Added estimated completion time to progress dialog for operation that take longer than 30 seconds Added support for named views that are saved to a workspace file rather than globally shared thus allowing you to easily share views view workspace files Added support for adding area and line features to a running instance of Global Mapper using t
330. ome range rings that had incorrect values stored e Fixed decoding of UTM zone 60 projections from NASA LandSat met files e When rectifying data with vector data displayed in the Reference pane made clicking near a vector feature automatically snap to that feature to assure exact matches e Made statistics STX files be generated for elevation BIL file exports e Added SHOW_3D_VIEW command to the scripting language to allow scripts and workspaces to bring up the 3D view window e Added option to generate XYZ grid files in row major order e Added option to anti alias pixels interpolate when batch converting between raster formats e Fixed rare problems loading some portions of Arc Binary Grid format files technically some 32 bit RLE encoded tiles with very large values were incorrectly decoded e Fixed problem with labeled areas exported to Landmark Graphics ASCII format files have two TEXT labels exported e Made image optimized palettes always contain white and or black if those colors are in the image being exported This makes collars stay the color they are supposed to be e Made tracking of Garmin USB GPS devices work for newer devices like the SP2720 that send some extra information when first connected e Added warning to exports when a large amount of TerraServer data would be exported to explain that it could be very slow and give the user a chance to cancel the operation WHAT S NEW IN Global Mapper v7 03 e New
331. ommand Added option to keep the original file offset scale when exporting to Lidar LAS LAZ files This is useful if you have some kind of requirement to keep the original offset scale in the header rather than having an optimal offset scale calculated Added support for providing a specific offset and scale to use when exporting Lidar LAS files rather than using the default calculated one with a new option on the Lidar export dialog or by adding a HEADER_OFFSET and HEADER_SCALE parameters to the EXPORT _VECTOR script command Allow cropping to a selected area when specifying the bounds to import from a Lidar point cloud This will currently just limit the points to the bounds of the selected areas and not actually crop to the areas Made Lidar point cloud data export to spatial databases like Esri File Geodatabases GDB They will export as normal 3D point features Made the GPS_TIME attribute for Lidar points be more intelligent about how many decimal digits are shown rather than always just showing a 10 of a second precision The number of digits is now based on the smallest time slice encountered Allow searching on the RETURN_NUM attribute in the search vector dialog Improved display of Lidar point clouds with intensities over 255 LIDAR MODULE ONLY Added option under View gt Toolbars menu to turn the Lidar toolbar on and off Added option to specify the Flight Date to store in the LAS LAZ file header when exporting Changed FLIGHT_
332. on English text in Shapefiles DBF Text will automatically be converted based on the language specified in the DBF file Support for UTF 8 decoding specified in a cpg file along with the shp file is also supported Added support for specifying the output format MG2 MG3 or MG4 and the network cartridge server location Updated PDF export to have options to control where the header and footer strings are placed relative to the margins You can now place them in the center or edges of the margins or directly on the map Make sticky notes in PDF files import as text point features Improved placement of text next to point symbols in exported PDF files Updated DGN export to write point features out as 0 dimensional line features rather than create shared cells for each point Added options to XYZ Grid export to allow exporting from the bottom to top or right to left rather than the default order Added registry option to specify the precision for XYZ Grid elevation exports If you add a DWORD key in HKEY CURRENT _USER Software Global Mapper with a name of ASCIIGridExportPrecision and a value of 0 or higher that value is how many digits of precision to include after the decimal for the output Z values When loading GeoTIFF files with an Esri aux xml and the option is selected to prefer world files over built in coordinate information use the aux xml positioning before all else if the aux xml has both a projection and control po
333. on grid layers You can now apply any custom formula to loaded terrain layers to create a new terrain layer The layer may actually be a grid of other non elevation values like NDVI values etc so this opens up an entirely new set of analysis possibilities O Added built in Raster Calculator formula for NBR Normalized Burn Ratio Added built in NDVI shader for displaying calculated NDVI data grid data in a nice manner If you select a NDVI formula then the display will default to the NDVI shader Added new Analysis menu command to Create Layer Statistics Report This allows you to analyze loaded vector layers and generate a report of feature counts and attributes This provides the functionality of the GENERATE_REPORT script command in the user interface You can also get this by right clicking on a layer in the Control Center and selecting to display layer statistics Added option to the Line of Sight dialog so that you can specify the from or to elevations are relative to a selected layer rather than just ground or sea level This allows you to specify transmission relative to an actual ground layer while including things like clutter or obstruction layers on top for the line of sight like perhaps a tower extending above trees that act as obstructions Added option when finding ridge lines to only find ridge lines above some minimum elevation Added option to Generate Contours dialog to discard any closed contour line segments below
334. on to the native projection of the layer that is right clicked on e Corrected placement of text points from DGN v8 files e Added support for rotated text from DGN V8 files e Added GPS toolbar with buttons for marking waypoints and showing GPS information e Fixed problem with the placement of area centroids labels for fully closed areas e Added support for loading GeoTIFF files with a gtif extension WHAT S NEW IN Global Mapper v10 01 e Added support for loading JPG files with embedded EXIF GPS position data These files will be loaded as point features with picture icons When you select one of these with the Feature Info Tool the JPG image will be displayed e Added support for tracking and managing multiple GPS devices via an input GPS data stream including PRAVE sentences With a compatible receiver you can now use Global Mapper for fleet management There is a new Manage GPS Devices option under the GPS menu that provides extensive functionality for managing the collection of GPS devices being tracked e Added new Color Grade tab to raster options dialog to allow complex manipulation of color channel values and saturation for loaded raster files This allows grading each color channel from a specified input range for a color channel to a specified output range e Added support for exporting loaded data to NITF format files e Added support for exporting an alpha channel to ECW and JPG2000 format files thus allowing creating of
335. ons to have option to specify the resampling method for each layer rather than defaulting to resample if any reprojection or pixel mis alignment occurs to avoid changing values Sped up gridding of 3D area features that are already in a TIN Also fixed crash doing this in some cases Re arranged watershed options dialog to fit on lower resolution screens Allow calculating density grids from the centroids of area features Made watershed roughness grid and equal value areas always be valid when created i e no self intersecting pieces e Digitizer Tool Changes O Added new EXTEND function allowing extending one or more line features to a previously selected line feature To use this first select the line feature to extend to then right click and choose the Move Reshape submenu command to select the extend to feature Then select the line feature s to extend to that line then right click and select the Move Reshape menu command to extend the selected lines Replaced options for copying attributes between individual features types with a generic Copy Attributes Between Features option This displays a dialog that allows you to select which types of selected loaded features to copy attributes between and exactly which attributes to copy Added options to group multiple polygons into a single multi part polygon and also to un group polygons These options are under the Advanced Feature Creation submenu All areas in a multi
336. oolbar to control whether or not the 2D and 3D map views are linked By default they are linked so updated in either one also updates the other If you disable the linking then you can separately pan and zoom the 2D and 3D view windows Added option to display skybox Add a realistic background to your 3D views Added display of onscreen notifications as 3D viewer settings change This will show text about changes to the water height walk mode height vertical exaggeration etc as text in a corner of the 3D window for some period of time default is 10 seconds You can configure the display of these notifications on the 3D view options dialog Added support for specifying an Altitude mode of Depth Below Sea Level for vector features either for an entire layer or for individual features If this is set the elevation for the feature will be treated as a negative value for display in the 3D view Fixed 3D zoom with mouse option which was broken in v15 2 0 v15 2 1 e Path Profile Line of Sight Function Changes O O Made crossing 3D lines shown in the path profile view display at the interpolated elevation at the cross point and not the elevation at the start of the intersecting line segment LIDAR MODULE ONLY Added right click option on main map when the Path Profile Tool is active but nothing is drawn to set the corridor width for a Lidar path profile Fixed bug in v15 2 0 with path profile dynamically drawn line not being correct for
337. or layers in the map catalog Fixed crash sometimes trying to find areas enclosed in other areas when partial overlaps are being checked for Fixed issue with X and Y coordinates being swapped when importing GML files with lat lon coordinates Updated Bing Maps Google Maps OSM and TMS tile exports to have option to force PNG files to export as palette based PNG files rather than automatically switching to 24 bit RGB PNG files if each tile has more than 256 colors Made the style Solid with Black Edges render correctly with fixed width in meters styles Include quotes around CSV column headers to prevent warnings in Excel for CSV files saved from the path profile dialog Updated import of VPF format data sets like VMAP UVMAP DNC etc to include both the decoded attribute descriptions and value descriptions as well as the raw attribute names and values Corrected issues importing and export Z elevation values with DGN v8 files Updated equal value area creation to save the palette index for the color value for palette based files rather than the full RGB color Fixed problems with elevation legend display for very large values i e over 1 million Prompt user for whether to recurse directories or not when adding a directory of files to a map catalog Remove error about file being open in another application when skipping existing tiles and exporting to new TIFF files Added support for providing view shed transmitter and rec
338. or using a special attribute value of lt Feature Layer Group Name gt in any place that an attribute can be selected for an operation This will be the name of the group of layers that the feature is in Added new options when duplicate records are encountered when joining records to a loaded file Now in addition to aborting the join or keeping the last match you can keep all matches either by appending to the same attribute value or by creating new attributes with a numeric suffix When selecting a feature with the Feature Info tool that has an attribute value with a URL or a link to a file you will now be prompted for an action to take automatically for that link including opening the file URL in the associated Windows shell application or browser or loading the file into Global Mapper This provides more straight forward access to some of the existing functionality that was on the right click menus for the Feature Info dialog That functionality is still there as well When selecting a feature with the Feature Info tool automatically open any path specified in an OPEN_LINK attribute with the associated Windows application Also support additional formats from the LINK attribute including PDF DOC and Excel spreadsheet files Added new option on the Vector Display tab of the Configuration dialog to hide the display of style attributes on the Feature Info and Search dialogs When exporting to tiles using the Tiling tab on export allow using s
339. ordinates based on distance bearing and or COGO values from a start location using the Digitizer Tool Added more control over placement of labels for point features Now when choosing the font to use for point features you can also choose where to place the label for the point relative to the point location An automatic setting will try different locations to try and make the label fit Added a large collection of new available line styles to use when rendering line features or area feature borders Added option to crop a loaded raster layer to the currently selected area feature to the Cropping tab of the Raster Options dialog accessible from the Overlay Control Center Added support for exporting loaded vector data to the MapInfo TAB MAP format Added support for exporting loaded 3D line and point data to the SEGP1 format Added support for exporting loaded area features to the DeLorme Polygon Text format that some DeLorme products can import Added support for loading IKT track files generated by MagicMaps software Added support for loading Gravsoft Grid format files Added option on the Gridding tab for exports to grid to the currently selected area features This will create a separate export file for each selected area feature Naming can be done using the display labels or an attribute of the selected area feature s Added support for generating 3D DXF and Shapefiles including using any loaded elevation data as a source when batc
340. orer rte format files Added support for loading Garmin PCXS5 rte format files Added support for loading UKOOA format post plot data files They are listed under the format SEGP1 UKOOA Added support for loading HF2 HFZ format elevation grid files Added support for exporting loaded gridded elevation data to HF2 HFZ format files Added new item to the Options menu on the Path Profile Line of Sight dialog to allow specification of how many sample points either by number or by a spacing distance to use when generating the path profile Allowed feather blending to use multiple polygons o Added several new built in symbols for different well types used in the petroleum industry Made minor improvements to Polish MP export including option to keep ID value from IMG ID section during templated exports to copy the FILES and MAP sections from template files to allow Text attributes longer than 80 characters and to automatically remove the labels from marine spot depth and height points Added new option to JPG export to allow specification of a DPI value to store in the exported JPG file Added DXF vector export option to use the filename for the input feature as the layer name in addition to the default of the feature description or the feature label Scripting Language Changes o Added new COMBINE_TERRAIN command to the scripting language to allow combining terrain layers to generate a new layer using a script file o Added new A
341. orkspace filename Fixed bug with auto cropping of collars from some file types when those files are displayed from a map catalog Improved recognition of elevation values from generic ASCII import Now values without a space between the elevation value and units will be allowed for an elevation column Make sure improperly formatted lt time gt values are not exported to GPX files Fixed blending of online layers i e TerraServer USA WMS layers etc with underlying DigitalGlobe layers Fixed error loading OCAD files with bad offsets in their header Fixed problems loading some MapTech PCX charts Added support for reading annotation and traffic line features from S 57 ENC files Added nautical miles as an available distance unit when creating distance bearing COGO lines Added new option to allow disabling the automatic snapping behavior of the Digitizer Tool This option is in the general option list on the Vector Display tab of the Configuration dialog Updated creation of point features sampled along a line or area boundary with a fixed distance between samples to allow a start label to be used and to label with the distance rather than an incremented number Updated the Digitizer Tool option to assign area attributes to lines in those areas to not replace existing values in the line attribute list but only add new attributes Added support for creating 24 bit TIFF files when batch converting to raster KMZ files Made double
342. ort for loading ATS Alberta Township System v4 1 files o Added support for GeoDXF and GeoDWG files DXF DWG positioned with WLD file Added support for using Adobe Color Table act files for palettes Added support for TIFF files with 12 bit per sample JPEG in TIFF encoding Added support for 16 bit TIFF files with palettes Added support for MrSID files encoded using CMYK colors Added support for LIDAR LAS files using point format 2 or 3 This allows for coloring Lidar data sets using the RGB color specified in the LAS file rather than the elevation based color o Added support for loading Anuga Triangulated Mesh format files o Renamed Platte River export to reflect that it is the same as the Whitestar Geographix Township Range format export e Projection Datum Changes o Added support for providing custom datums with the conversion to WGS84 based on a set of control points from a text file This allows you to easily create your own datum conversions when you just know a collection of lat lon values in the source projection and the corresponding WGS84 lat lon location o Added support for getting projection information from ESRI aux xml files o Added the La Canoa Venezuela PSD93 Oman and North Sahara 1959 Hassi Messaoud datums as a built in datums o Updated PRJ files saved in WKT format to use names expected by ESRI products that in general don t conform to OGC standards Made Wisconsin County Projections write out correctl
343. ort for tracking GPS devices on COM ports up to COM64 previously the highest support serial port was COM 16 Made the COM port and baud rate settings for serial GPS devices be properly remembered between sessions Added shortcut key Ctrl T for starting and stopping the tracking of a connected GPS device Made font information about labeled features be saved in Simple ASCII Text files exported with the include attributes option set Added support for using new font attributes when reading generic ASCII text files See the User s Manual section for that menu command for details on the new supported attributes Added ability to combine line features in the Search by Attributes dialog Just select the lines to combine then right click on them in the list and select the combine option that appears e Fixed errors loading label points from some e00 files e Added support for rectifying ECW and JPG2000 files e Added support for loading TAB referenced raster files which do not have the same base name as the TAB file You must select the TAB file to load for this to work e Ifa color palette is specified in a TIFF header for files with a grayscale photometric interpretation use the color palette rather than creating a grayscale one Apparently some products like ArcGIS will create TIFF files in this way for some reason e Made TEXT feature labels from MIF MID files be read in and used e Made saving a path profile to a BMP file save
344. ortcut key to toggle all vector layers on and off to Ctrl Shift V from just V since the V shortcut key was already used to enable snapping only to vertices Fixed range of elevation legend display and shader colors when the min max elevation values are overridden for a loaded terrain layer Allowed non integer starting number values when creating new point features spaced along selected line or area features using the Digitizer Tool Allowed naming of points sequentially or based on distance when creating new point feature spaced by distance along selected line or area features using the Digitizer Tool Made display elevation legend on right toggle work properly Fixed bug in PDF export that caused labels for lines with a Null drawing style to not be exported Fixed bug with road icons assigned to existing line features not being maintained when saving and restoring a workspace Corrected progress bar behavior during Vertical Mapper export Updated creation of terrain when flattening areas to flatten based on drawing order so the top most drawn area that is flattened will be the flattened part in the terrain useful for nested 3D areas like for a building Fixed crash when closing a layer that a search is active on in the vector search dialog Fixed problems in v11 xx loading some ASRP USRP data sets Added support for additional HDF data sets Added recognition of 190 as a P 190 file extension Added option to Measure Tool to allow
345. orting ECW files of unlimited size Previously there was a limit of 500 MB of uncompressed data for ECW exports o Added support for exporting loaded data to JPEG2000 format files o Added support for exporting loaded raster elevation data to KML KMZ file for display in Google Earth use File gt Export Raster and Elevation Data gt Export KML KMZ menu command o Added support for exporting loaded gridded elevation data to DTED format files o Added support for exporting loaded gridded elevation data and 3D vector data including LIDAR point clouds to LIDAR LAS format files o Added ability to make area features partially transparent Everywhere that you can edit an area style now has a transparency slider allowing you to adjust how translucent a solid filled area will be o Added new File gt Combine Terrains menu command to allow combining loaded terrain layers with a variety of operations including differencing terrains averaging terrains and using the min and or max elevations from two terrains o Added new option to the Color Contrast Adjust option dialog for raster layers to allow specification that the contrast adjustment should be shared between multiple layers This allows a consistent contrast adjustment to be applied to all images with that option checked o Added option to view shed calculation to generate area features for the covered areas These generated area features could then be exported to vector formats like Shapefiles
346. ow they just come in as text Added advanced options for specifying the minor and major contour interval when generating contours Previously you had to use the ContourInterval_Minor and ContourInterval_Major registry keys to do this this also still works Updated DXF and DWG exports to have new labeling option to include labels in same layer as area and line features that they come from rather than generic FEATURE_LABELS layer Updated export of area and line features with a single elevation value to still create 3D features in exported DXF files Made road icons scale based on the symbol scaling factor specified when exporting PDF files Added option to Vector Display tab of the Configuration dialog to make the mode for drawing new area and line segments at right angles perpendicular to the previous segment on by default You then turn off with the R key Added new command to external control API command GM_Ctrl_DeletePoint to allow deleting existing point features that were added with GM_Ctrl_AddPoint Added option to automatically split Garmin Raster Map exports into separate KMZ files if the result won t fit in a single KMZ that Garmin units can make full use of Updated Measure Tool to add new options on right click menu to always use the larger unit like km for metric or miles for statute and also to round the measured value to the nearest whole number Added option when exporting vector data to KML files to control whethe
347. p www globalmapper com for more details e Allowed Global Mapper to use up to 4GB of RAM on 64 bit Windows On 32 bit Windows Global Mapper like all applications is limited to 2GB of RAM e Added option to rotate point labels when selecting the font to use for points of a particular type e Digitizer Tool Changes o Added option to the Digitizer Tool to create flatten terrain within any selected area features that have an elevation value associated with them o Allowed quick insertion of multiple vertices in selected features with the Digitizer Tool by holding down the ALT key when adding vertices This will cause you to stay in insert vertex mode rather than reverting back to the default mode o Allowed modification of insert vertex behavior to insert vertices on the existing selected line feature if the SHIFT key is held down when adding vertices This allows you to emulate the behavior of releases earlier than v8 01 if you prefer things to work that way o Allowed quick deletion of selected vertices with the Digitizer Tool Simply use the CTRL DELETE hotkey to delete selected vertices This saves having to right click and select the delete vertices option from the popup menu o Added new right click option to the Search by Attributes dialog to allow selecting all of the selected search results with the Digitizer Tool to allow further editing after closing the dialog o When reversing the order of line vertices also reverse any left or righ
348. p the styling of areas in a layer Now users can use the default type based styling apply a single style to all area features in a layer setup an attribute based styling system that styles the areas based on the value of an O attribute value or the display label or randomly assign colors to the areas in a layer Added Line Styles tab to Options dialog for vector layers with line features allowing users to setup the styling of lines in a layer Now users can use the default type based styling apply a single style to all line features in a layer setup an attribute based styling system that styles the lines based on the value of an attribute value or the display label or randomly assign colors to the lines in a layer Added support for resampling raster and elevation layers using bicubic interpolation or a box average of size 3x3 4x4 or 5x5 in addition to the previously available options of nearest neighbor and bilinear interpolation The anti alias option on the Raster Options dialog has been replaced with one for selecting the sampling method to use Updated the option to crop lines to areas in the Digitizer Tool to allow splitting lines i e keeping parts both inside and outside the crop areas Updated the option to add areas as islands in another area in the Digitizer Tool to allow removing overlapping but not enclosed areas from another area The option was renamed to Cut Selected Area s from Another Area Add Islands to refle
349. part group must be in the same layer and have the same attributes style and type Editing any area in a group will edit all areas in the group These areas will stay grouped as a multi part polygon when exporting to Shapefiles You can select all areas that are part of a group under the Advanced Selections submenu You can also see all of the areas in a group with the Feature Info tool Added tool to find and fix invalid i e self intersecting area features among selected areas Added the option to specify an allowed distance threshold when connecting lines into areas so that you can create areas from lines that don t exactly match at their end points but are within some specified distance Allow inserting of vertices at intersections of area features Previously the vertex insert only worked for line features Added option to select all area and island features below a certain size threshold This allows easily finding small areas islands for removal Updated Concave Hull creation to work for area and line features Updated subtracting of lines from multiple area features when using the Crop Loaded Features to Selected Area s option to generate the correct results if the line crosses multiple area features Fixed error about invalid polygons when creating buffers for some features Added new items to Options submenu to control whether or not snapping is only to point features or vertices of line area features Fixed scaling of features i
350. pecial values left top Zright and bottom for the numeric start value for the rows and columns Those special values will be replaced with the corresponding edge of the tile cell bounding box This allows you to easily get output filenames with the tile cell coordinates embedded in them Made further significant speed up to exports cropped to areas when you are cropped to multiple area features The more areas you cropped to at once the faster it is now as compared to before Made the last used Tool be remembered between runs so if you use the Zoom Pan or Measure Tool that tool will automatically be selected when you start Global Mapper the next time Updated layer metadata to include 8 new entries the longitude and latitude for each corner of the map bounding box in the current map projection datum Allow adding the Open Sample Data option from the quick start buttons shown when you first open Global Mapper to the Favorites drop down list on the toolbar so you can use it when you already have other data loaded Updated the batch geo coder to recognize PROVINCE and POSTAL CODE as column names from a CSV text file being geo coded Made exports cropped to an area when keeping pixels if any part is in the crop area handle any type of intersection of the crop area with a pixel and not just those where the pixel center or any corner point is included If snapping an export to the nearest layer pixel boundary and cropping to an area ma
351. penetrable objects like buildings Sped up the display of point clouds with a very large number of points i e 10 s of millions of points particularly when zoomed in on a small section of the point cloud LIDAR MODULE ONLY Made path profiles through Lidar points in a map catalog show those Lidar points Added new built in point type for Railroad ASPRS class 10 Lidar Railroad Added support for coloring points by the point index in the point cloud This allows visualizing the spatial arrangement of the points in the source file Updated display of min max Scan Angle on the Statistics dialog for Lidar point clouds to show the min max values in degrees rather than the raw scaled values LIDAR MODULE ONLY Made Feature Info dialog and status bar display modifications to elevations from Alter Elevation Values tab of Options dialog for point cloud layer LIDAR MODULE ONLY Made the elevation legend display with height colors for a height above ground rendering of a point cloud Updated creation of point clouds from elevation grid cell centers to create the points in the full native units of the layer and not a more precise unit like centimeters LIDAR MODULE ONLY Fixed coloring of Lidar path profile as height above ground if the main map view is not also using the same draw mode Fixed bug in v15 1 6 15 2 1 with Lidar classification filter on the Lidar load dialog not being remembered Fixed bug in v15 2 0 v15 2 1 with binned grid
352. pper SettingsFilePath Added option to generate 8 bit GeoTIFF files with no compression via a new compression selection list on the GeoTIFF export dialog Removed separate JPG in TIFF GeoTIFF export option as you can now achieve the same results with a 24 bit RGB export and the JPEG compression option selected Added option to online data source dialog to load WMS data sources from an external text file This provides an easy way to share your list of WMS sources with other users Updated 3D view to rotate around the center of the current view rather than the center of the entire data set currently in the 3D view Updated LIDAR point clouds to display in color in the 3D view Made most point symbols display in the 3D view rather than just a dot for each point Added option to KML KMZ export to highlight areas in Google Earth when you mouse over them Updated automatic loading of image links from attributes to support image filename values relative to the path of the data file containing the feature with the attributes When exporting Shapefiles provide more options for splitting the data into separate files so that you can now choose to split based on the type classification of each feature same as the current option or based on the feature description layer Added support for cropping to selected area features when creating an elevation grid from loaded vector layers Updated the rectification dialog so that if you press Enter with the f
353. pport for addition font style information from attributes using FONT_STYLE FONT_WEIGHT and FONT_PLACEMENT attributes e Changed name of automatic MODIFIED_DATE attribute to MOD_DATE to avoid attribute name length issues with Shapefiles e Fixed problem when geo coding to loaded data from a file that contains the address number and street name in the same field WHAT S NEW IN Global Mapper v10 00 e Significant New Features O O Added support for importing ESRI personal geodatabase MDB files Added support for importing and exporting BigTIFF files which allows working with Geo TIFF files larger than 4GB Added support for generating super overlays in raster KML KMZ exports to allow for the viewing of massive quantities of data in Google Earth The existing option to automatically grid data on the KML KMZ raster export options dialog enables this behavior Added support for selecting changing the layer that features are in when editing existing features and creating new ones with the Digitizer Tool Added ability to generate raster KML KMZ files using the EXPORT_RASTER script command Added new Coordinate Convertor option under the Tools menu to allow easily converting a coordinate between any two supported projections datums units Added ability to Search Vector Data dialog to limit your search to the existing search results This effectively allows you to query on multiple attributes values Added support for creating new feature co
354. pported to provide the angle in degrees e New Supported Formats O Added support for loading HCRF Hydrographic Chart Raster Format files including ARCS Admiralty Raster Chart Services charts Added support for exporting gridded elevation data to JPEG2000 elevation grid files Added support for exporting new DTED3 HRTE3 format files from loaded elevation data DTED level 3 files have a resolution of 0 4 arc seconds or about 12 meters per sample Added support for exporting loaded line data to LMN Spectra Land Management Node format files Added support for loading Tobin WCS Well Coordinate System files Added support for loading Carlson SurvCAD Grid files Added support for exporting loaded line data to Hypack Planned Line LNW format files e Projection Datum Changes O Added support for automatically adding custom datums from TOWGS84 parameters in WKT PRJ files Added option to the Advanced section of the General tab of the Configuration dialog to control whether or not generated WKT PRJ files include the datum transformation as a TOWGS 84 field Added Hotine Oblique Mercator Azimuth Natural Origin projection to allow specifying Hotine projections where the false easting and northing are at the natural origin of the system Added new Hong Kong 1980 MGI Croatio Serbia MGI Slovenia and NAD83 ITRF96 datums Fixed loading of Minnesota State Plane South Feet projection from ECW files Updated Clarke 1866 Autha
355. ption enabled to display a separate line for each surface and there were multiple surfaces under the path Updated the 3D Path Profile Path Details to include the Path Length length along path and the ground 3D length for the Total Climbing and Total Descending segments Updated line of sight dialog prompt for which elevation layer to base ground relative tower heights on to only show once per path profile dialog instance so if you want to check different heights you don t have to keep re selecting the base elevation layers Added option on the dialog to set up the profile sample count spacing to always keep all original vertices of the line the path profile is being shown for This option allows you to specify a custom sample spacing but still ensure the original line path is exactly followed O Made CSV export from path profile start the distances at the specified base distance Made right click in the path profile when Lidar points are selected clear the Lidar selection rather than showing the context menu This provides an easy way to clear the selection Added more distance units to the path profile spacing options and also made the units selection be remembered between runs Fixed display of Total Climbing and Total Descending in 3D Path Profile details when elevation values are displayed in feet rather than meters e Analysis Function Changes O Added new Analysis menu command to Count Overlapping Layers This is useful
356. ption is under the Display Options menu on the Path Profile dialog o Added support for writing Adobe ISO 32000 Extensions to PDF and 3D PDF export These are the Adobe standard for geo spatial PDF files The PDF export options include a checkbox option to specify that this type of placement information should be saved O Added new Recent File Types filter in the File gt Open dialog to track commonly used file types As you open files those you use the most often will be added to that filter It will start with the contents of the Commonly Used Formats filter but will adapt over time as you use the software e New Supported Formats e O O O O QO 0 0 Added support for loading data from and exporting data to MS SQL Server Spatial databases The spatial database import and export dialogs now have an option for MS SQL Server Added support for loading generic MS Access MDB files with point data You are prompted for the fields to get the coordinate data from This works for things like GPSeismic files Note that because there is not a 64 bit MS Access driver generally available you have to use the 32 bit Global Mapper to load these files LIDAR MODULE ONLY Added support for loading Leica PTS point cloud files Added support for loading new GvLF Lidar database format gv1 Added support for exporting 3D terrain and features to U3D files Added support for loading ECRG Enhanced Compressed Raster Graphics toc xml files Adde
357. r blend mode to combine the color channels in a layer using the common algorithm for generating natural color imagery from the SPOT HRV multi spectral sensor Fixed bug writing out 3D area features to DGN files Made the Copy to Clipboard button on the Feature Info dialog copy the actual feature to the clipboard for pasting into Global Mapper in addition to copying the text attribution for the feature to the Windows clipboard for pasting in a text application Added new option to the Vector Display tab of the Configuration dialog to allow auto iconizing road feature names on import if they are recognizable icon names like I 70 US63 etc Made holding down the P key when left clicking with the Feature Info tool only select area features i e nearby lines and points will be ignored Fixed problem generating image optimized palettes during export when the input files are all palette based files whose combined palette has over 256 colors Allowed for the generation of tab files for ECW and JPEG2000 when batch converting Made results on Search by Attributes dialog not include features in hidden layers or features with the types disabled for display Allowed splitting of selected area features at selected vertices with the Digitizer Tool when more than one feature is selected Added option to several raster export formats like ECW JPG JPEG2000 to fill small gaps between valid data samples Fixed problems loading some projections fro
358. r initial display and search O O Os O Improved 3D PDF and U3D export performance Allow use of any available attribute value for naming layers in PDF export rather than limiting to just the feature description or source filename as before Includes addition of LAYER_ATTR to EXPORT_PDF script command Made Korean and Japanese text export properly to PDF files Added option to 3D PDF export to control whether Lidar points are saved as short colored lines or points noting that Acrobat reader cannot currently display the colored 3D points Updated KML KMZ export of 3D area features with a specific extrusion height in a 3D_EX_HT attribute to automatically add the faces necessary to create a floating 3D volume rather than just extruding the area to the ground This is useful to create 3D airspaces or other floating volumes Updated PostGIS Spatialite and MySql databases to properly convert text to from UTF 8 now that we have code page language support Added option to load BMP JPG PNG and TIFF images with no geo position information directly as Picture Points similar to a JPG with EXIF information You get to select the location to place the image on the map You can also provide a PICTURE_POS with an IMPORT command in a script to load a file as a picture point via script Updated KML import to keep the extrude tesselate and altitudeMode attributes for area and line features The extrude attribute is used in the 3
359. r URLs added through the Select WMS Data Source to Load dialog o Added support for adding custom WMS sources with a question mark at the end of the server URL o Added support for adding custom WMS sources with a service name other than WMS this was not working properly before e Added option to 24 bit RGB and JPG in TIFF GeoTIFF exports to have any background no data pixels marked as transparent This works by adding an alpha channel to the file This might not be supported by all applications e Added support for loading the Z coordinates for 3D area features from most 3D shapefiles e Added option to the Simple ASCII Text export to write out the Y latitude coordinates before the X longitude coordinates if desired e Added support for cropping Simple ASCII Text exports to a selected area feature Note that this will only crop point features to the selected area feature Exported area and line features will only be cropped to the bounding box of the selected area e When exporting vector data to Simple ASCII Text files made area features that extend outside of the export bounds be cropped to the export bounds e Added option on the File menu of the Path Profile LOS dialog to save the sight line and the Fresnel zone line if applicable to a KML format file for display in Google Earth e Made overwrite of existing workspace files fail safe by not writing out the workspace to the existing file until the workspace save is complete and
360. r a POLYGON_CROP_FILE using anew POLYGON_CROP_FILE_PROJ parameter Added support for marking lines that are a subset of another line as a duplicate when using MARK_DUPLICATES YES or DELETE_DUPLICATES YES with the EDIT_VECTOR command Just add SUBSET_IS_DUP YES to command O O Improved behavior of FORCE_EXIT command so it doesn t cause a different exception to be thrown Now it cleanly exits the application Also if the application does crash for some other reason 1 should be returned as the return code rather than 0 Added option to ignore islands holes in areas when using CONVERT_AREAS_ TO_LINES YES with the EDIT_VECTOR command Now also add IGNORE_ISLANDS YES to only create lines from the parent area boundary Updated JOIN_TABLE command to accept FILE_DELIM SPACE or FILE_DELIM TAB Made MIN_ELEV and MAX _ELEV for GENERATE CONTOURS command be interpreted in the ELEV_UNITS specified rather than always meters e Projection Datum Changes O O O Updated Alberta 10TM projection to have separate zones for Resource and Forestry versions of projection Added new EPSG codes for Indiana State Plane zones using US Feet codes 2965 and 2966 replacing deprecated codes 2244 and 2245 Fixed problem loading Nautical Miles units from WKT PRJ files Added better error message when we can t load a WKT PRJ file due to an unrecognized datum ellipsoid or unit string e Online Source Changes O O Included OpenSeaMaps
361. r for most file types The improved metadata display allows copying the metadata to the clipboard and easy viewing of projection information e Projection Datum Unit Changes O O O O O7 O O Added support for the NAD83 HARN HPGN datums Improved accuracy of NAD27 Alaska Old Hawaiian Mean and Puerto Rico datums by adding support for using the NADCON datum conversion methods for those datums Improved accuracy of NTF France datums by adding support for using variable grid shifts depending on the location within France Added support for creating custom datums that use the 7 parameter Bursa Wolfe datum transformation method previously only the 3 parameter Molodensky method was supported Added built in support for the Irish Grid projection Added support for yards as a linear unit Added support for millimeters as an elevation unit Corrected detection of UTM zones in the Southern Hemisphere from old format ESRI PRJ files Improved decoding of some projections from OziExplorer map files e New Supported Formats O O Added support for loading NTF format grid files such as those used for elevation data in Great Britain Added support for loading some FAST format imagery files such as those used for L7A Landsat data in some parts of the world e Digitizer Tool Changes O O Made holding the X and Y keys when moving vertices or features with the Digitizer Tool clamp the move horizontally or vertically When cre
362. r intensity values rather than elevations when doing a bin based grid of Lidar point clouds The intensity grid will default to a grayscale rendering like an aerial image but can be customized to use any shader The option is a new Grid Type selection on the grid options dialog You can also do this from a script by adding GRID_TYPE INTENSITY to the GENERATE _ELEV_GRID command LIDAR MODULE ONLY Added option to grid Lidar height above ground values rather than elevations when doing a bin based grid of Lidar point clouds The option is a new Grid Type selection on the grid options dialog You can also do this from a script by adding GRID_TYPE HEIGHT_ABOVE_GROUND to the GENERATE_ELEV_GRID command LIDAR MODULE ONLY Enhanced option to filter the selected Lidar points in the Digitizer Tool to also allow filtering the selection by classification point O source ID and scan angle range LIDAR MODULE ONLY Greatly improved filling of gaps when doing binned gridding of Lidar point clouds The filled gaps should now be much smoother and also calculate more quickly LIDAR MODULE ONLY Sped up display of height above ground color for Lidar point clouds on multi core machines Dramatically sped up searches on point clouds LIDAR MODULE ONLY Added support for coloring Lidar point clouds by the difference in height between the first and last return of a multiple return pulse This is useful for visualizing things like potential tree heights or non
363. r or not lines with per vertex times are exported as Replay Tracks Updated elevation grid generation to allow a grid tightness threshold down to 0 5 grid spacings to allow getting a grid that exactly covers a regularly gridded set of input data Added option to control whether or not tile organization is used for exported JPEG2000 files Improved support for NLCD National Land Cover Database files by automatically detecting the palette for those files and making the land cover type name be added to the palette for display in the status bar as you move the cursor around the map Made calculated density grids be saved to workspaces Added button to map catalog dialog allowing the removal of files that can t be found Added option to Lidar LAS export to specify the File Source ID and Global Encoding values in the header Added option to Lidar LAS export to specify which vertical CS datum to store in the header Made the bounds specified on an Export Bounds or other bounding box tab be displayed on the map as it is updated if possible Fixed crash calculating cut and fill volumes with the Measure Tool over a range of heights Added option to Prepend as Text when calculating new attribute values When prepending or appending text to attributes from the calculate attribute option of the Control Center don t automatically provide an extra space character Fixed problem with coloring of point clouds from Lidar files from v13 00 rele
364. r with the filename of a palette file to use Added support for wildcard matches in type names in EDIT_VECTOR compare strings rather than requiring an exact match or a match on all types Added support for replacing new line character sequences using the EDIT_VECTOR command Just use n in the from or to side of an ATTR_REPLACE_STR parameter Added support for cropping layers to a polygon boundary specified in layer pixel coordinates rather than layer native coordinates Do this by defining the pixel boundary with a DEFINE_SHAPE command and adding CLIP_COLLAR_POLY_PIXEL YES to the IMPORT command Added support for specifying a producer code and security classification for DTED exports using EXPORT_ELEVATION New DTED_PRODUCER_CODE and DTED_SECURITY_CLASS parameters are now available LIDAR MODULE ONLY Support using bin based gridding with GENERATE_ELEV_GRID script command via GRID_ALG and GRID_BIN_SIZE parameters Added option to create area skeleton lines using the EDIT_VECTOR command Add CREATE_SKELETON_LINES YES to the command to create them Updated creation of buffers with the EDIT_VECTOR command to support putting the buffer distance units right in the BUFFER_DIST parameter Also made units of MILES work they were treated as meters before Updated match on loaded layer filenames and descriptions with wildcards to do a case insensitive search of loaded layers Added support for appending results of EXPORT_METADATA to existing text file
365. r work to hide show selected layers in the Control Center Fixed placement problems with some DGN files i e those with a non zero origin in v12 00 Enabled option to crop to the right and bottom bounds of grid cells when gridding to a fixed ground size Made area obstructions in view sheds work better when the area feature is small compared to the view shed sample spacing Updated the behavior of the arrow buttons in the Control Center for re ordering layers to skip over entire groups of layers at a time Added support for serial GPS devices that use 7 bit mode 7N1 rather than the normal 8 bit 8N1 connection mode This is for advanced users only See the User s Manual section on the GPS Setup dialog for details Updated the same as source units elevation unit option when batch converting to the GMG format to automatically switch meters to centimeters and feet to centifeet so that the full resolution of the vast majority of data sets can be maintained by default while still getting excellent compression Updated batch conversion to use lower case file extensions for all conversions When loading geo positioned PDF files with multiple positioned map frames make the map frame that is the largest portion of the PDF file be treated as the main map frame if the users chooses to just load the main one Added support for loading DTED files that incorrectly store the row for each data record Made Control Center remember which groups of layer
366. raster exports and when batch converting to most formats new in v14 0 1 release Added support for loading OpenAir Airspace text files Added support for exporting loaded line data to ZMap IsoMap Line Text files Added support for loading NMF ArcGIS Explorer map format files Added support for loading Cosmo SkyMed SCS Radar Data in HDF5 Format O O O 0 O Added support for additional bands of VIIRS data in HDF5 Format Added support for loading Cogent3D imagery line point and poly files Added support for loading generic text files with MGRS coordinates Added support for exporting loaded contour line data to the AnuDEM contour gen format Added new export options for RAW and ERS ERMapper Grid formats These were previously possible using the BIL export now there are just explicit options to get the proper extension and options by default Added support for text format files like Arc ASCII Grid Files larger than 4GB in size Added support for LogASCII v2 0 Files only v3 0 were supported before Change in v14 0 1 Added support for elevation GeoTIFF files with 64 bit double precision samples e Digitizer Tool Changes O Added new Favorites toolbar that provides easy access to frequently used Digitizer Edit Tool options The new toolbar automatically tracks which features you commonly uses and makes some of those available You can also customize it and choose which options to always make available The currently s
367. re to calculate an optimal rotation angle for selected area closed line features such that the combined cut and fill volume for the features is minimized at a calculated break even height This is a powerful feature for finding the optimal orientation and cut height for a pad site to minimize the total amount of dirt that needs moved Added a new group of online data sources with limited usage for free from Spatial Energy www spatialenergy com lt http www spatialenergy com gt This includes Bing Maps data among several other sources Added option to Digitizer Tool to easily subdivide an existing area into 4 separate areas like sectioning an area Useful for parcel maps e New Supported Formats O O O O O O O 0 Added support for exporting loaded data to CADRG CIB format data sets Added support for exporting loaded data to ASRP format data sets Added support for importing and exporting Garmin JNX format data sets This allows much larger data sets like imagery to be exported to compatible Garmin devices which already have a Garmin BirdsEye subscription than the officially supported KMZ format This option is part of the existing GPS menu item to send raster maps to a Garmin device and also as part of the list of raster formats from the File gt Export gt Raster menu command Added support for exporting loaded terrain data to binary STL format data sets Added support for generating OziExplorer map positioning files for most
368. render very slowly Updated setting of group name from Control Center to have a drop down list with the other existing groups to allow easily selecting an existing group Updated batch rectify export operation to ensure that each output image maintains the full resolution of the input image even if it has to be expanded to account for rotation Added new right click option on the map catalog dialog to allow sorting the maps by resolution When showing a 3D path profile from a named line feature display the name of the line on the dialog title on the path profile itself when saving to a BMP and also in the path details Updated Lidar LAS exports so that updates to the CLASS and INTENSITY attributes for points being exported are used rather than the original values from the file Corrected auto assignment of Lidar point types for classes 10 and up including adding a new Lidar Bridge and Road point types When splitting layers by numeric attributes in the Control Center sort the new layers numerically rather than alphabetically Made commas and semi colons be the first checked for delimiters when doing an auto detect of delimiter on import of generic ASCII text files Update PDF layer and page selection dialogs to be resizable and have their size remembered Updated S 57 import so that if you have customized the style to use for Isobath areas that style is used rather than an auto assigned solid shade of blue based on depth Made layer de
369. res Added option to the Advanced Creation Options menu of the Digitizer Tool to create new point features from the vertices of selected area and line features Added new options to the right click menu option of the Digitizer Tool for creating rectangular square area and line features by manually entering the rectangle coordinates Added new built in point types for LIDAR point types to make it easier to filter out different LIDAR points loaded from LAS and Terrascan LIDAR files Sped up export to GeoTIFF files when a large number of input files are being exported Added support for adding multiple custom symbols at once when adding custom symbols on the Point Styles tab of the Configuration dialog Added automatic positioning of OSGB 10K grid cells in TIFF format Improved generation of image optimized palettes in cases where over 16 7 million pixels with the same color are involved in the export Added ability to select which layers to load from an ESRI personal geodatabase MDB file Added new palette option during batch conversion to use the same settings as the source file This allows you to convert a mixture of RGB and palette based files and maintain their original settings Added built in support for the Double Stereographic and System 1965 Uklad 1965 projection systems Added built in support for IRENET95 Malongo 1987 PRS92 Philippines Reference System 1992 and SWEREF99 datums and associated EPSG projection codes Added new E
370. res is selected made snapping work so that selected vertex will snap to other existing features e Greatly improved initial display of OS Mastermap data from GML files Most areas will now automatically be displayed using the OSGB recommended colors Made fill of small gaps during raster export work even at T intersections of no data lines The average of colors across the diagonals will be used at those intersections if available When gridding exports to selected area features and not cropping to the area boundaries use the full bounding box of the area for each export rather than the intersection of the area bounding box with the specified export bounding box Made custom shader dialog resizable Added new option when batch converting to Simple ASCII Text files to control whether or not a blank line is used to separate features Added new option when batch converting the CSV files to allow using a space separator rather than a comma Fixed problems loading TIF files created by AutoCAD Raster Design that specify they both have strips and tiles they really have tiles When digitizing a line with the stream mode delay any simplification until the feature completes and also don t remove quite as many vertices when simplifying Added new keyboard shortcut Shift T to go into line trace mode in the Digitizer Tool Added new ASCII import option to skip a fixed number of lines at the start of a file Fixed problem saving new measure areas and
371. results or not Added support for loading NetCDF files with 32 bit integer samples for the grid Added support for GRIB files from NOAA with Polar Stereographic projections and with longitudes from 0 360 Fixed inversion of some PDF files positioned with Adobe 32000 position data Fixed export of 3D vector data to 3D PDF files so that all elevations are converted to meters so they are consistent with the terrain Fixed error loading some S 57 S 63 data sets Made the DGN import option to import cells as points work for DGN v7 files Does not currently work for newer DGN files Fixed problem with fixed width area border styles not saving to GMW and GMP files Fixed error saving a workspace with modified ASCII text files that contained areas Fixed display of 32 bit TIFF grayscale imagery with invalid values of 2147483647 Remove extra blank line after header lines when exporting to SEGP1 format Fixed problem with PRJ file not being found automatically for SHP files on a network drive that has case sensitive filenames Fixed error reading OTF feature template file Fixed problem with attributes coming in wrong for text files with WKT coordinates in the first column e Rendering Style Changes O O Added support for rotated multi line text Added new line styles for double lines with lines on the outside path but not the middle Added support for specifying a background color and width for any line style to allow drawing a solid l
372. rid exports with large no data areas filling those areas with 0 when zoomed out Fixed issue in v13 1 with layer selection not working for all PDF files Fixed more issues loading DGN files with curves as part of the outer boundary of an area shape Fixed issue with exporting 3D area and line features with elevation units other than meters to vector Lidar LAS files The elevation units were not converting correctly Fixed issue with the MapMart Data Discovery Tool from the online source not working on 64 bit Windows Updated XY Color Text export to store pixel center rather than pixel corner coordinates Added prompt to cancel entire load process when one of multiple selected files fails to load Updated E00 import to include the level for annotations as an EOO_TEXT_L attribute for the point feature created for the annotation Make Control Center remember position between runs in addition to size Fixed issue in v13 1 with the length of attribute names and values being limited when adding or editing them Don t show warnings about every empty E00 file encountered when loading more than one file at a time Fixed vertical flip of BMP exports with vector map layout items included from v13 1 Fixed issue in PDF export with Map Layout margins overriding PDF export margins and sometimes obscuring other map layout layers like custom text Updated grid line export to PDF files to only show those grid lines appropriate for the export resolution rath
373. rking and replaced it with a new US radar imagery source and 2 worldwide cloud cover both visible and infrared sources Added support for adding sources from the custom tile sets at lt http wms jpl nasa gov gt the same source used for the Landsat and ASTER GDEM sources in Global Mapper This includes things like the daily MODIS and AQUA data sets o Fixed issue with the new option to not download WMS sources as tiles for display not working if the path to your temp folder was too long Also fixed crash when this option is checked o Fixed issues loading data from some WFS servers o Fixed display of clickable feature information using the Feature Info tool when using WMS sources that support that This was broken in v14 0 e Projection Datum Changes o Added automatic recognition of most GeoTIFF files with incorrect false easting northing values due to Esri products doing an incorrect unit conversion when creating non meters GeoTIFF files with a custom projection Those files will now position as desired despite the incorrect information in the header o Added support for a new getLayerProjectionStr function to the raster elevation plugin API This allows you to fetch a WKT projection string or EPSG code for the layer and use that for the projection o Added built in Poland 2000 grid system based on ETRS89 o Added support for additional zones for the Gauss Krueger 3 degree zone projection and removed Germany from the name as it now cov
374. rs not found in the rest of the map Fixed CADRG CIB export with vector data that had poor results in areas of partial vector coverage Added option to select the Security Classification character for DTED exports Automatically recognize the elevation for spot heights and contour lines from OSGB GML files Load lt node gt entities from OSM XML files if they have any non default attributes and not just a recognized OSM type Updated OSM XML exports to remember the last used automatically assigned node and way IDs so that subsequent exports will have unique ID ranges Remove quotes automatically from attribute values in generic ASCII text file import Add Tiling tab to CSV export to allow gridding into tiles Updated GMG export to default to using lossless compression Also made that setting be remembered between runs Added many more recognized names for GRIB format weather products Made batch conversion from Arc Binary Grid files uses folder name for new file name rather than w001001 since all Arc Binary Grid files use the same filename Added option to export the Y Latitude coordinate before the X Longitude coordinate when batch converting to Simple ASCII Text XYZ Grid and XY Color files Updated OSM XML export to always write out a version attribute for each lt node gt and lt way gt element written out A value of version 1 is used if no version field already existed Added support for automatically getting position an
375. s When importing generic ASCII text files make the default attribute list for the type being assigned to a feature automatically be applied to the attribute list for that feature Added automatic type and style assignment from attribute values when loading DBF point files Updated the Find by Name dialog to allow recentering on a feature without showing the bullseye icon if you hold down the ALT key when double clicking on an item Added new Ctrl Alt L shortcut key for automatically copying the current point cursor coordinates to the clipboard in the current selected projection with a tab separated the X and Y coordinate values Corrected placement of ECW JPEG2000 files that use a projection code of TMNEW YEM They were previously very slightly shifted Made the COMBINE_TERRAIN script command by default use the intersection of the bounding box of the two layers being combined rather than the union of the layer bounding boxes Fixed problem with elevations sometimes not being saved when recording a tracklog for a connected GPS device Made saved CSV export options be remembered during a run of Global Mapper Fixed problems loading LAS Terrascan and DMDF files from workspace files Added support for loading latest GNIS USGS Geographic Names database from http geonames usgs gov domestic download_data htm Added option when capturing the screen contents to an image to save a text file containing metadata about the file like the bounds
376. s such as the Antarctica DRGs Fixed loading of attributes from MIF MID files when one of the attribute names starts with Index Fixed errors trying to batch convert raster data with both the Use Other Source Files As Filler and Auto Adjust Contrast options enabled Improved rectification based on an OziExplorer map file when that map file has a UTM grid and each control point has both lat long and grid coordinates or the map file has control points that are marked as excluded Allowed ground control points specified for rectification with the IMPORT script command to be specified in a projection other than the specified projection for the file being rectified The use of either the GCP_PROJ_NAME or GCP_PROJ_FILENAME parameters will cause the control points to be projected automatically to the file projection before rectification occurs When loading LIDAR LAS data save the class of each sample point as an attribute When batch converting from LIDAR LAS data to other vector formats add an option to only include sample points classified as ground shot points in the output Don t display POLYLINE entities from DXF files that are marked as 3D polygon meshes or polyface meshes When loading generic ASCII files with quoted fields make sure the quoted fields are properly treated as a single field and that the quotes are removed for all fields Also treat back to back double quotes as a single quote mark in the text that d
377. s Imagine and NITF image formats Fixed problems loading area features from some SOSI format files When creating point features from selected line and area features with the Digitizer Tool copy the attribute values from the selected features to the new points Fixed dark display of some GIF files Fixed problems saving named views from v11 02 Fixed export of header and footer text to PDF files when no top or bottom margins are used Updated the hill shading when a non zero maximum shadow darkness is used to scale the shadows between the maximum brightness and darkness rather than clamping any shadows to the max darkness value This allows for more contrast in the darkly shadowed areas Added support for loading SWIR and TIR data sets from ASTER L1B HDF files Added new right click option to the Measure Tool to enable display of extra digits of precision for measurement values Updated SEGP1 exports to have an option enabled by default to write out easting and northing columns with an implied digit of decimal precision if possible Fixed view shed calculation for checking beam visibility for negative transmission angles When saving a line of sight to a KML file from the Path Profile dialog save extra points along the line of sight rather than just the endpoints so that it displays properly in Google Earth Added time of fix to GPS Information dialog Updated WMS import to not default to EPSG 4326 Lat Lon WGS84 if the WMS server do
378. s are expanded when new layers are added and the list is rebuilt Made workspaces remember their bounds properly when loading them by double clicking in Windows Explorer Fixed problems from v12 00 exporting 3D area and line features or area features with labels to DGN files Fixed problem with the default to use screen bounds for export option not working right if you didn t actually click to the bounds tab of an export or other bounded operation option dialog before pressing ok Sort sources on Download Online Imagery Data dialog alphabetically within each group Fixed problems exporting new OpenStreetMap OSM XML files with non HTML characters in the name or attributes Corrected assignment of vertex elevations to selected area and line features when the layer didn t use meters for units Added Help menu link to Shortcut Key List Fixed incorrect calculation of slope values from some lat lon elevation grids Updated new areas created by cutting out another area with the Digitizer Tool be created in the same layer as the area being cut rather than the User Created Features layer if the area layer isn t being reprojected Corrected placement of point symbols for 3D points in 3D view They were shifted one symbol height down Updated watershed calculation for selected points to add the enclosed area of the watershed areas for each point to be added as a SHED_AREA attribute to the selected point features Fixed conversion
379. s rather than just a single elevation attribute When calculating view sheds and using area features as obstructions added option to control whether or not the top of the area features are allowed to be marked as visible or not Added support for modifying the intervals used for designating minor and major contours during contour generation via registry keys To change the minor interval create a DWORD value HKEY_CURRENT_USER Software GlobalMapper ContourInterval_Minor and set it to the desired multiplier 5 is the default To change the major interval create a DWORD value HKEY_CURRENT_USER Software GlobalMapper ContourInterval_Major and set it to the desired multiplier 10 is the default Corrected issues loading BIL BIP BSQ images with signed 16 bit samples rather than unsigned 16 bit samples Added support for gridding Terragen exports Fixed problem in v10 02 release with rotated symbols being mirrored in the X direction Reduced default simplification applied during contour generation to improve appearance of contours generated with default settings at the expense of the default settings now resulting in contours with more vertices Added new options to the right click menu in the Measure Tool allowing you to set the bearing format to degrees the previous display format the two directional format used in surveying or mils In addition you can also choose whether to display bearings relative to True North Magnetic North or Gr
380. scription in the Control Center include the count of deleted features Updated 3D view options dialog to have OK Apply Cancel and Help buttons rather than updating the view immediately as you are changing values This prevents inadvertent changes and very slow editing of values with large data sets loaded Fixed problem in v13 1 release with reading latitude from GPRMC sentences formatted as DDMM MMMM on a connected GPS device or from a NMEA text file Fixed bug exporting LASzip LAZ files from 13 1 release that caused them to only be readable in v13 1 Fixed issue in 13 1 with labels not showing until you change the labeling option on the Options dialog for the layer in the Control Center after saving and reloading a workspace when not using attribute based labels Made Arc ASCII Grid exports write no data value as 9999 0 rather than just 9999 so that ESRI products don t treat the grid as an integer grid rather than a floating point grid Made text file CSV import not replace n text in filenames or URLs with a newline character Added support for loading UKOOA P 190 files that do not conform to the format specification Fixed issue with v13 upgrade license being prompted for every time that you run in v13 1 Use font rotation and placement information from OSGB MasterMap GML files Fixed problem with custom OSM TMS Google Maps tile URLs with variables in them and also ampersand amp characters not working due to the ampersands being
381. sea level display as blue in the Global Shader Added support for loading JP2 files with no embedded position information but with an accompanying aux xml file with position information Made the vector type filter dialog for the Map Layout dialog resizable and have right click options on each type list for clearing or setting all types Added option to GPX export to include all feature attributes and not just those officially supported in the GPX format Support additional GML flavors like new OSGB INSPIRE maps Improved loading of LandXML files including adding support for loading contour lines Added support for using index txt and other index files from MSI Planet to position most image formats like BMP Fixed issue from v13 2 loading NITF files with embedded high bit depth JPEG2000 images Significantly sped up the drawing speed of some NITF files with embedded JPEG2000 images Allow setting up attribute based styling that matches against a blank value When loading KML files obey any designated lt HotSpot gt and lt scale gt for custom icon symbols Added option to the Advanced Section of the General tab of the Configuration dialog to disable copying error message text to the clipboard automatically Use this if you have issues with error text wiping out text you were copying on the clipboard when an error pops up in a Global Mapper process Updated import of color fields from generic text files to support some common color n
382. selected area files allow using just the most overlapped area from the selected areas to crop rather than all When cropping a map O O O O catalog to multiple areas this is automatically done for each map in the catalog individually This allows easily cropping to a custom grid of coverages all at once When placing your mouse near 3D features the elevation of the feature or closest location on 3D areas lines will be displayed on the status bar after the feature description Added new Show All button to Search dialog allowing you to easily reset the search back to all searchable features Updated search on attributes not equal to a text value to include results that don t include the attribute at all Added option to display slope percent grades on the Elevation Legend if using a slope shader Enable this by right clicking on the elevation legend if a slope based shader is active and checking the option to display slopes as percent grade Added option when creating custom elevation shaders to repeat the colors for anything outside the specified range rather than clamping them Updated Style tabs of Options dialog for vector layers to allow manually entering an attribute name to base the styles on rather than selecting from a list This allows selecting an attribute style for map catalogs where the attribute list isn t known up front Add display of the coordinates of each vertex in the current view export projection on the F
383. similar to the functionality available with a map catalog You can configure this by right clicking on a layer in the Control Center and selecting the new option to setup what zoom levels a map will display at o Added support for generating multi band GeoTIFF files with 1 and 2 bands as O well as 32 bit floating point samples Added support for generating 8 bit 256 color GeoTIFF files with transparency Added support for importing BIL and GeoTIFF imagery files with 32 bit floating point samples Fixed major performance issue from v11 00 with triangulating and gridding 3D vector data It should now be 5 10 times as fast as in v11 00 Added support for generating tiled GeoTIFF files Added new Search menu option to allow finding and editing loaded vector features with the same attribute values This is useful for enforcing things like an attribute that needs to be unique Made elevation statistics calculated for area features include slope statistics Added font label scaling option when exporting Geo PDF files allowing you to easily grow or shrink labels written to the PDF file Added ability to export to a fixed scale when exporting Geo PDF files Added support for generating MapInfo TAB files for most raster format exports Changed behavior of drawing lines using the trace mode of the Digitizer Tool to work while the mouse button is depressed and complete when you release it This makes the trace mode work much better with digitizing t
384. some tiles that you want different data in Simply delete the tiles that you want to re export then do the export again with the option to skip existing files checked o Added option when gridding data on export to specify a prefix to apply to the column and row names when separately naming rows and columns When loading Shapefile MapInfo and DXF format files use the layer name attributes to try and auto classify features When exporting Shapefile and MapInfo MIF MID features and including the description as an attribute also include the classification as a GM_TYPE attribute if the description for any of the feature being exported is not the default of the classification name Added built in support for the Quebec MTM projection Added support for western hemisphere zones when using the Gauss Krueger 6 degree zone projection Added built in support for the LUREF Luxembourg datum Improved accuracy of the Dutch Grid projection and the Dutch RD datum When performing cut and fill volume calculations also calculate and display the surface area that needs cut and filled respectively Made the Path Details dialog for a 3D path profile display the along ground distance i e distance with elevation changes taken into account as well as the minimum and maximum elevation values along the path Added support for loading USRP data sets ASRP data with UTM coordinates Made all appropriate border pixels be marked as transparent in ADRG
385. spacing setting Made TIFF files that use a transformation matrix for position information be automatically positioned rather than requiring rectification Made degree symbols display correctly on Asian versions of Windows Corrected drawing and zooming in on ECW and JPEG2000 files that have flipped Y coordinate values in the header Added option to contour generation to control whether or not small gaps in the data are filled previously they always were Improved the speed of exporting downloaded TerraServer data to new raster files Corrected display of zone numbers for Gauss Krueger Germany projection Only show the warning message about user defined datums in GeoTIFF files being interpreted as WGS84 once each session e When changing the current view projection maintain the current view window if possible rather than zooming out to all loaded data e Added option to initialize sample spacing values to the current screen sample spacing from the dialog allowing specification of sample spacing in units other than the current projection units when performing raster and elevation exports e Added red blue green and white dot symbols
386. t click options to the Area Styles Line Styles and Point Styles tabs of the Configuration dialog to allow saving the current style settings to a file and restoring style settings from a file Added new ASSIGN_TYPE command to the scripting language to allow classifying loaded vector features based on one or more attribute display label value queries Added support for loading SOSI format files commonly used in Norway Added ability to easily shift loaded data by some fixed distance by right clicking on them in the Control Center and selecting a new option to shift the selected layer s Made batch conversion remember the last used import and export formats as well as the last used settings for a previously used import export format combination Made GPX files with links pointing to local image files behave just like JPG files with EXIF positioning data and show the image when you click on the point with the Feature Info tool The linked images will also export to KMZ files Added new Slope Direction shader to allow coloring loaded terrain files by the direction that the slope faces the coloring can be setup on the Shader Options tab O of the Configuration dialog You can also now export slope direction values to Float Grid files Added option to batch converter to add a watermark image Added new option to only display area labels when the label is completely contained within the parent area to the Vector Display tab of the Configuration
387. t files e Projection Datum Changes O O O Add built in support for TWD67 Taiwan and Wisconsin County Marathon datums Improved accuracy of OSGB36 datum transformation in offshore areas where the grid shift file is inaccurate In order to still provide a way to explicitly use the NTv2 grid shift or choose the 7 parameter transformations the existing Ordnance Survey 1936 datum was renamed OSGB36 Best Transform and 2 new specializations OSGB36 Grid Shift and OSGB36 7 Parameter were added so that uses that need a particular transformation can choose the one that they need Improved accuracy of nautical miles as units of measure The conversion factor was inexact Made NAD27 datum specializations like NAD27 Mexico use the proper explicity datum code when exporting to MapInfo files rather than the generic NAD27 datum code Allow providing a rotation angle for Polyconic projections Added support for automatically adding custom datum definitions from GeoTIFF files using the Geog TOWGS84GeoKey tag Improved accuracy of State Plane Alaska Zone 1 projection conversions Corrected display of Robinson projection with non zero central meridian e Digitizer Tool Changes O Updated snapping when drawing new features to automatically snap to the intersections of line and area features even if they don t have a vertex at the intersection If grid lines are displayed make snapping snap to them by default You can disable snappin
388. t measuring the volume difference within multiple selected area features and generating a report of the volume difference within each area and the total difference o Added option when measuring the volume of one or more area features either with the Digitizer Tool or drawn with the Measure Tool to measure the cut and fill volume of the area relative to how the edges of the area feature cut the terrain surface This provides a very easy mechanism to measure the volume or one or more piles of material simply by drawing selecting an area around them o Added new EXTEND function allowing extending one or more line features to a previously selected line feature To use this first select the line feature to extend to then right click and choose the Move Reshape submenu command to select the extend to feature Then select the line feature s to extend to that line then right click and select the Move Reshape menu command to extend the selected lines o Added new right click option to the Search Vector Data dialog to allow calculating and displaying the statistics for a numeric column in a result set This allows you to easily see the minimum maximum average and standard deviation of the numeric values for all of the selected attribute for the result set e Lidar Improvements o Allow searching on elevation values for Lidar points missing in v14 1 0 o Added option to color Lidar point clouds by the return number to easily visualize wh
389. t of a data set Improved compression ratio achieved in LZW compressed GeoTIFF files Fixed problem exporting Shapefiles split by layer description when the layer description includes special characters like lt or gt Allow the Control Center dialog to be resized to be more narrow Added option when batch converting from USGS DRG files with accompanying FGD metadata files to use the quad name from the FGD filename as the output filename Drastically sped up the loading of Canada3D files Updated distance bearing input dialog to allow bearings to be specified with formats other than decimal degrees like DMS DM etc Added new option to the Options menu on the Path Profile LOS dialog to allow modifying the start distance for the distance scale in the path profile graph When gridding during export and using a letter to name rows and or columns keep the letter as lower case if it was originally specified that way Fixed problem with default line simplification not being applied during contour generation unless you actually click on the Simplification tab When gridding to selected area features allow the overlap setting to be applied if you are just cropping to the bounds of each area feature Corrected half pixel shift in the placement of loaded GXF files Fixed problem reading palette color labels with spaces in them from pal files Made the shot point number field in exported SEG P1 files be right justified Increased the numb
390. t type attributes like addressing attributes o Added option to add address attributes to selected point features using addressing information from the nearest line feature to those selected point features e Scripting Changes o Added new IMPORT_DIR_TREE command to allow importing all files in a directory tree that match a list of filename masks This is the same functionality offered by the File gt Open All Files in Directory Tree menu command o Allowed the user of files with multiple polygons when using the POLY GON_CROP_FILE parameter for any of the EXPORT_ commands If multiple polygons are found in the specified file the polygon with the largest overlap over the loaded data will be used as the crop polygon o Added ability to specify template file to use for MP export when scripting TEMPLATE_FILENAME parameter for EXPORT_VECTOR command o Added ability to specify an image id to use for MP export when scripting MP_IMAGE_ID parameter for EXPORT_VECTOR command o Made User Created Features layers be exportable via scripts run in the context of the main view window Added new SAVE_CURRENT_VIEW and RESTORE_LAST_SAVED_VIEW script commands to allow saving a restoring views from within script files Added OVERWRITE_EXISTING parameter for EXPORT_ELEVATION EXPORT_RASTER and EXPORT_VECTOR script commands to allow user to specify that they want to skip existing files Made passing a filename of USER CREATED FEATURES to the UNLOAD_LAY
391. tab of the Configuration dialog to have only the border of selected area features highlighted Added additional Lambert France projections to handle the newer projections with larger false northings Made the attributes used for each of these Lambert projections be listed on the Projection selection dialog as well Added support for decoding and encoding Lambert France projection codes from GeoTIFF files Added support for automatically decoding projection and datum information from text metadata files accompanying Mexican topo maps Fixed rare problems loading some NOS GEO format files Fixed bug cropping reprojected area features on export to MapInfo MIF MID format files The bug caused those areas to not be exported Improved behavior of near white colors when exporting to image optimized palettes When exporting 3D point features to DXF files export the elevation information after the coordinate information rather than before Fixed problems loading positioning information from Touratech TTQV cal files where the first pixel control point is at 0 0 Also added support for automatically decoding Swiss Grid projections from those files Fixed application of Fresnel zone analysis to view sheds It had nearly no effect in the v8 00 release for view sheds it did work properly for line of sight analysis however Expanded support for FAST format Landsat imagery to allow the direct loading of panchromatic VNIR SWIR and thermal imagery without
392. tches against their attributes label values and or types Updated PDF export to allow using a separate layer for each raster elevation file exported to a PDF file rather than always combining them into a single layer Made grid line setup be saved in workspace files and map layout files so your grid spacing setup will be saved separately in each workspace Allowed adding updating per vertex elevations for selected line and area features from loaded terrain layers using the Digitizer Tool Added elevation units selection for loaded vector layers to the main Feature Types option tab for the layer moved from Projection tab making it much easier to find and work with Added option to area volume measurement to find the cut height at which the cut and fill volumes would be approximately equal Added option to save color values from loaded raster files and select the elevation units when exporting new Lidar LAS files from loaded vector data Added option to log all incoming GPS fixes and NMEA strings to a file on the GPS Setup dialog Added support for initializing view shed calculation parameters for calculations from selected points based on attribute values of those points This allows for calculating a number of view sheds at once with different parameters Added support for automatically rotating geology symbols based on an attribute value providing the rotation angle Currently the attributes DIP_AZI DIP_DIR STRIKE_AZI or STRIKE_DIR are su
393. tension when loading most imagery formats i e BMP JPG TIFF GIF and PNG Corrected placement of Hawaiian data loaded from Tiger files the NAD83 datum was being used rather than Old Hawaiian Mean Made the size of the feature info dialog be saved between sessions Fixed decoding of State Plane projections from new format PRJ files The problem was introduced in the v6 09 release and made some PRJ files with State Plane projections decode the projection into the core projection rather than keeping it as State Plane This should not have affected any coordinates Corrected incorrect interpretation of Foot string from new format PRJ files Previously this was interpreted as US Survey Feet when it should have been interpreted as International Feet Fixed application crash loading some slightly odd zip files Made additional digits of precision be stored for settings like custom grid spacing Manually compute the min max sample values for USGS DEMs that have a non unity Z resolution since they are often stored incorrectly resulting in odd shading in Global Mapper This will apply to things like decimeter and centimeter DEMs Made full extents of polar data reprojected from a polar stereographic projection to another projection be displayed whenever possible previously the part nearest the pole and near the anti meridian could get clipped off Increased the maximum number of grid lines that could be displayed when using the custom grid
394. the main view window when they complete in all cases Made the Run in Context of the Main Map View setting on the Run Script dialog be remembered between runs Allow selection of elevation units when batch converting to the Lidar LAS format Fixed bug with color intensity values not being used in some cases for some raster files Added option to the elevation grid generation dialog to allow the user to specify that they want the generated elevation grid to fill the entire bounding box of the input data rather than stopping at the convex hull of the data set This should really only be used for data sets that very nearly fill the bounding box but have corners cut off or something Added support for reading raster layout information from glcf data files Fixed problems loading portions of some Erdas Imagine img grid files with floating point samples Added support for auto detecting connected NMEA GPS devices running at 9600 baud in addition to the standard 4800 baud Fixed error exporting vector data to SHP file if there are more than 100 attributes with the same name to 10 characters associated with a single feature Added support for getting positioning information for JPG files from JGC files Fixed problems loading CDF files where the pen goes up and down within a single string of coordinates Added new RP_RenderStarted and RP_RenderFinished functions to raster elevation import plugin API to allow plugin DLLs to be notified of raster be
395. the Search dialog and selecting to display stats show the sum of the values in addition to the other Stats Updated check in of borrowed license to automatically check license back out normally from the license server rather than requiring you to re register against the license server Made the borrow until date show on the Help gt About dialog if using a borrowed license from a network license server Improved automatic adding of commonly used commands to the Favorites toolbar to add more commands used in the Digitizer Tool Made the Shift Layers option in the Control Center remember the last offset units and values Fixed problem with custom vector point symbols from DXF files being vertically flipped Fixed favorite option to move selected vertices to work if only a single vertex is selected Fixed problems with favorite shortcuts using special characters like commas Made GPS NMEA data log dialog resizable Fixed slowdown replaying a recorded GPS NMEA log in real time The display was very unresponsive Fixed problem with GPS menu option to keep the vessel on screen being disabled Fixed problem with some settings like custom styles and custom datums not saving and being available in the next session if some Global Mapper SDK based applications had been run on the machine such as SonarWiz Fixed PolygonClipper cpp error when exporting reprojected data with islands where some of the islands of an area cannot be displayed in
396. the export Fixed problem with elevation TIFF files with overview layers not displaying properly when the elevations are not stored in meters Fixed orientation and position of imported CPS3 grid files Fixed error loading some Erdas Imagine IMG files Fixed problem in v15 1 when exporting to MS SQL Server database with float field Fixed display of EXIF JPG files in map catalogs in v15 1 Fixed error at end of loading large Surfer Grid ASCH files Fixed problems with large over about 42 676 values in elevation GeoTIFF files with unsigned 16 bit samples drawing as invalid voids Fixed saving of Albers Conic projections to MapInfo files Fixed crash loading some corrupt incomplete LAZ files Fixed issue with point elevation units changing to meters if the Elevation Display Export Units setting was set to Native Layer Units on the Vertical Options tab of the Configuration dialog when exporting to formats like CSV Fixed crash in OSM XML export when one or more lines contains a RouteParam value with more than 12 fields Fixed vertical shift in output XY Color files when using a resolution that is an odd integer Fixed slow load of some Arc Binary Grids in v15 1 e Rendering Style Changes oO Added option to create a Quiver Plot from attributes of point features to easily create directed scaled arrows or other symbols With this option you can select U and V vector attributes or Magnitude and Rotation attributes as well as a s
397. the export projection Fixed crash showing metadata for a layer in a map catalog WHAT S NEW IN Global Mapper v15 0 Significant New Features o Added support for feature extension plugins to Global Mapper These allow 3 4 parties and customers to create add ins to Global Mapper to extend the functionality through their own toolbars and or menu items The feature extensions will have access to all data loaded in the Global Mapper application instance through same API used by the Global Mapper SDK There is an item under the Help menu for managing the installation and registration of feature extension plugins and add in modules There are 2 extensions included with the install a COAST extension allowing cost analysis of sea level rise simulations and a Map Overview extension to allow adding a separate map window allowing easy navigation around the entirety of the loaded data o Added separately licensed Lidar module with advanced Lidar analysis functionality See Lidar Changes section below for details The licensing is handled under a new Help menu option for working with module and feature extension licenses o Added Raster Calculator under Analysis menu for performing mathematical operations on multi band imagery to extract different types of information You can use pre defined formulas like NDVI and NDWI or create your own free hand formulas using common mathematical operations like addition subtraction multiplication division and po
398. the ground control point list of the image rectification dialog be displayed using the current Position Display Format selection in the Configuration dialog o When double clicking on a control point in the control point list in the image rectification dialog and the rectify coordinates are lat lon values format the projected X and Y coordinate fields using the current Position Display Format from the Configuration dialog o While Shift clicking in the Zoomed view in the image rectification dialog automatically add the control point to the control point list use the clicked location o When Ctrl clicking in the Entire Image view in the image rectification dialog automatically recenter the Reference view if there are enough control points entered to convert the clicked coordinates to a ground coordinate o Make layers that are hidden in the Overlay Control Center still be rendered in the rectify window when re positioning that layer o Default to use triangulated rectification when rectifying imagery any time that 5 or more control points are entered and the Automatic rectification method is selected previously this happened at 8 control points Added support for using the bounds of a loaded layer when exporting or performing other operations that require bounds in a script file The LAYER_BOUNDS parameter has been added to several script commands to support this Added ONLY_GENERATE_METADATA parameter to the EXPORT_RASTER script command
399. the index of the vertex and not the actual elevation Fixed problem with some OSM XML files taking extreme amounts of memory to load Default to always show digitizer toolbar to prevent redraws when switching to Digitizer Tool You can always turn this off if you want it just defaults to on now Reduced memory required to load large Lidar LAS files as point clouds Updated the calculation of area elevation statistics to include the position of the minimum and maximum elevation found within the area Added support for providing extra parameters in OSM TMS and Google Maps tiled URLs when adding new sources Added support for Arc ASCII Grid files with extra line breaks after the header lines Fixed drawing of striped lines with black edges when printing Corrected Y flip of SurvCAD grid files Made 3D lines show through 3D translucent areas in the 3D view Fixed render issues with some GeoPDF files Corrected loading of MTEXT entities from DXF files with rotation elements provided Added support for reading and writing receiver group records in UKOOA P 190 files Corrected generation of area features for some VPF data sets i e VMAP 1 Added support for loading uncompressed 32 bit tiles from Arc Binary Grid files Made using Java filenames the default when exporting WorldWind tiles Added Ctrl E shortcut to Overlay Control Center providing quick access to edit the description of selected layers Added new option to disable the automatic b
400. tifying and classifying ground shot points from unclassified Lidar point clouds LIDAR MODULE ONLY Added support for drawing points from a point cloud as a height above ground This will determine a ground elevation for all locations under the point cloud using classified ground and water points if available and then display the height relative to that The new draw mode is available on the Lidar draw mode drop downs LIDAR MODULE ONLY Added support for exporting elevations to LAS LAZ points from a point cloud as a height above ground There is a new checkbox option on the LAS LAZ export dialog allowing you to specify that the saved Z values should be heights above ground rather than the normal elevation You can also script export of height above ground by adding SAVE_HEIGHTS ABOVE _ GROUND to the EXPORT_VECTOR command for O LAS LAZ export Added new Lidar tab to Configuration dialog for easily filtering Lidar data by classification and return type LIDAR MODULE ONLY Added support for saving Lidar statistics from a script If you add ADD_LIDAR_STATS YES to an EXPORT_METADATA script command you get all of the information from the Statistics tab of the Metadata dialog dumped to the file LIDAR MODULE ONLY Added Alter Elevation Values tab to Lidar options dialog to allow offset scale and range restriction of Lidar point cloud data This is the same as the Alter Elevation Values tab available for gridded elevation layers
401. ting correctly e When loading KML KMZ files use the folder names from the files to automatically assign Global Mapper types if possible i e if a matching type name exists e Added ability to specify water level in feet in addition to meters in the 3D viewer e Fixed problems loading some complex entities from DXF and DWG files e Fixed problems adding package files with multiple layers to map catalogs e Made default attribute lists be applied when changing the feature classification of multiple features at a time e Corrected placement of image files positioned using world files with rotation WHAT S NEW IN Global Mapper v9 02 e Significant New Features o Added support for exporting any loaded data into tiles for use in Microsoft Virtual Earth In addition an HTML file will also be created allowing immediate viewing of the maps The menu option for creating the tiles is under the new File gt Export to Web Formats menu o Moved web mapping formats like Google Maps World Wind etc to a new File gt Export to Web Formats menu from existing export menus o Added ability to batch convert to DTED and raster KMZ formats o Added Vertices button to the Feature Info dialog to allow displaying and editing the location and per vertex elevations for line and area features and displaying per vertex time stamps for line features o Added ability to apply elevation values from loaded terrain data to point features using a right click option
402. tion and positioning information from TAB files for ECW files o Added support for decoding New Zealand Map Grid projections from TAB files o Added option to write an invalid datum code to DEM files when exporting with a view export datum set to one that is not supported by the DEM format o Do not allow modifying the Origin Latitude for Mercator projections since it is not used the latitude origin is always the equator for Mercator o Fixed saving of some projections to MapInfo TAB files Some projections either could not be written at all or if they had a central meridian scale factor parameter it would always be set to 1 0 o Made projection information from supplemental files like prj files be used if available for GeoTIFF files that do not contain projection information internally rather than always asking the user to select the projection in that case o Added GRS 1967 Indonesia 1974 Sphere Radius 6378388 Meters and War Office McCaw 1924 as available ellipsoids for adding custom datums o Fixed name of the Everest 1830 ellipsoid in the custom datum dialog It was being incorrectly listed as Everest 1930 Made Ctrl Right Click in the Zoom Tool restore the last zoom scale Made the name of the map that a vector feature is in always be displayed in the Feature Info dialog for the feature Added button on the General tab of the Configuration dialog to allow restoring all settings to their default values Added supp
403. tion of elevation units on vector options dialog This was broken in v15 2 0 v15 2 1 Fixed odd selection behavior in the Control Center when clicking on the or next to a group of layers Previously any existing selection would be maintained and the new group also selected rather than the previous selection being reset Fixed installation problems on XP 64 bit in v15 2 0 v15 2 1 Fixed crash stopping GPS tracking when playing back a NMEA log file in real time Fixed rare issue with custom settings like custom shaders or datums not reading on application start if you start multiple instances at nearly the same time Fix error about parsing GMSettings xml on systems with no internet connection Fixed placement of main Global Mapper window when the placement of multiple monitors is changed In some cases before it could start up off screen Fixed issue with right click option to move selected layers after another layer in the Control Center not working if the layer to move after was before the layer to move in the list Fixed lockup when closing all layers with grid lines displayed e Fixed issue with TMP files sticking around in temp folder after crashes e Fixed issue with lockup closing all layers with a grid layer displayed WHAT S NEW IN Global Mapper v15 2 e Significant New Features O Added option to File menu of 3D Path Profile Line of Sight dialog to save the rendered path profile to any supported vector export format includ
404. to PDF files Fixed elevation values for points created from an elevation grid layer when offset and or scale values are applied to the elevation grid layer e Fixed loading of WKT formatted data from some text files WHAT S NEW IN Global Mapper v12 01 e Significant New Features o Added built in access to 1 3 arc second 10m resolution US NED terrain data using the File gt Download Online Imagery Data menu command o Added option to export tiles conforming to the OSM OpenStreetMaps and TMS Tile Map Service standards for tile naming and zoom levels This is under the File gt Export Web Formats menu command and very similar to the Google Maps or Bing Maps exports o Added support for adding new custom OSM TMS online tile sources on the File gt Download Online Imagery Data dialog o Added support for exporting loaded data to BSB Marine Chart format files o Added ability to improve display of 3D view by selecting the size of the terrain and texture layers to use when displaying the 3D view and also interpolating view O of data draped from main map view You can increase the terrain and texture sizes to get a more detailed but slower display Added option to create area features from equal colors elevations in any loaded raster elevation layer by right clicking on it in the Control Center and selecting the new option to do so This is useful for things like extracting vector coverages from something like a land use cover raster
405. to export feet or meters for elevation values derived from loaded terrain data during export Updated Google Maps exports to use a separate folder for each row in a particular zoom level to avoid overloading a single Windows folder with more files than it can efficiently handle Fixed problem with incorrect slope values of 0 being written out to Float Grid format files in some cases Fixed bug with slope values written out to Float Grid files being slightly smaller than they should be especially in very steep areas Fixed problem with KML_ZOOM_SCALE_FACTOR script parameter not working Added support for overriding the default naming convention for Lidar class names using a lidar_classes txt file enumerating Lidar classes and the new name to use for those classifications Fixed problems with some features being missing when loading some ESRI personal geodatabase mdb files like those from the NHD Updated KML import to support color specified for icons When batch converting files that are loaded in the main map view with contrast adjustment enabled use the contrast adjustment settings of the loaded files during the conversion Added support for loading clutter and height files similar to MSI Planet but with cl or he extensions and a List file rather than a Index file Added new option to Google Maps and Virtual Earth exports to allow skipping existing tiles This provides a mechanism for restarting cancelled exports or just updating par
406. tor data Added new option to View Menu to enable the display of Info Tips at the cursor location This will display a popup window at the cursor location with information about the feature and or map under the cursor Updated Help menu command to Release Remove licenses for node locked licenses to automatically communicate with the license server if possible to further simplify the process of moving node locked licenses to a new machine e Lidar Improvements O Dramatic increase in the size of point clouds that can be loaded You can now load point clouds with hundreds of millions or even billions of points Dramatic increase in the speed of displaying large point clouds both in the main map view and the 3D view especially when zoomed out Improvement in the appearance of point clouds when you zoom in on them Now the individual points will get larger when zoomed in on them to make them easier to see Additional display options for point clouds including the ability to render the intensity values as grayscale images coloring by the Lidar classification and coloring by the point elevation or RGB color if present Option to limit import of Lidar files based on the return type i e first return last return first of many last of many etc Special storage of Lidar points in Global Mapper Package files They will now store extremely compactly in GMP files typically several times smaller than the uncompressed LAS format Lidar po
407. tting for orientation of PDF exports to allow automatically selecting landscape or portrait orientation based on the aspect ratio of the exported data Fixed bug with left margin setting in map layout being set to right margin when saving a re opening a workspace or Global Mapper Updated creation of a new feature classification type from the feature edit dialog to use the currently selected style as the default style Made the shift offset feature dialog display the bounds of the selected feature Fixed issues loading some PDS format files Fixed problem with duplicate attributes when splitting line and area features on a change in a particular column when importing ASCII data Made the automatic delimiter check during generic ASCII imports check for the pipe I symbol Made multi page TIFF files load as separate layers in the Control Center Made last used contour simplification threshold be remembered When moving items in the Control Center ensure that the item being moved remains visible if possible Fixed bug where rotating or scaling 3D area or line features would cause any per vertex elevations to be lost Updated map catalog files to save any calculated raster statistics for a layer so they don t have to be recalculated multiple times as a map is loaded and unloaded Updated the sub path text display on the profile dialog to include the slope as grade in addition to degrees slope Updated the area and line elevation statistics
408. tures except for known cities be written out to Polish MP files as RGN10 features rather than RGN20 features Made features in Polish MP files that do not have data at level 0 still be loaded e Scripting Changes O O Added new EXPORT_METADATA command to the scripting language to allow exporting of text metadata for loaded layers to a file Added ability to grid exports from script files when using the EXPORT_ELEVATION EXPORT_RASTER and EXPORT_VECTOR script commands Added SAVE_DIST_Z_FILE parameter for GENERATE_PATH_PROFILE script command to allow specification that a file containing distance and elevation values should be saved rather than one with the XYZ coordinates of the path profile line Corrected behavior of POINT_SPACING parameter for GENERATE_PATH_PROFILE script command It was generating one less sample point than needed o Added new DEFINE_SHAPE script command This is currently used for defining a polygonal feather blend boundary o Added ability to export CDF format files from a script o Allowed POLYGON_CROP_FILE to be used for EXPORT_VECTOR command For now all line and area features will just be cropped to the bounding box of the specified polygon Point features for some formats will actually be cropped to the polygon e WMS Changes o Fixed problems exporting WMS data layers to Global Mapper Package files Now the full detail of the data layer will always be exported o Removed limit on the length of WMS serve
409. turn a code of 1 rather than 0 if an error occurs while processing the script o Added SKIP_UNLOAD_ALL parameter to EMBED_SCRIPT command to make embedding workspace files without unloading everything else possible o Added support for specifying the spatial resolution for operations that take a resolution in meters using a new SPATIAL_RES_METERS parameter Updated digitizing of new line and area features when a point location is snapped to a point feature or vertex with an elevation a 3D line or area is created assuming every vertex location had an elevation with the elevation values of the clicked points vertices Updated path details reported for line of sight analysis to include information about the location of the minimum LOS clearance like the location clearance for Fresnel zone and baseline and elevation of baseline Added new line style Solid with Arrow Pointing to Both Ends to allow easily drawing a line feature with arrows pointing at both ends Added option to restrict the range of considered elevation values when generating contour lines from loaded terrain data Made Download Online Imagery Data dialog resizable Allow measuring the combined cut and fill volumes of multiple selected areas Updated the GPS Information display dialog to display the altitude above ground level AGL if terrain data is loaded at the current GPS location Added right click option to the Control Center to allow selecting all onscreen layers Ad
410. ue with red box around point location for No Symbol points with text exported to KML KMZ files e Added JPG quality setting to Google Maps Bing Maps OSM TMS export dialog e Updated option for selecting lines within area to allow selecting those lines that are just partially in the area in addition to those completely within the area e Allow export of grid lines to Shapefiles even if no other line features are loaded e Added support for extracting feature attribute information from lt ExtendedData gt section of lt Placemark gt entities in KML KMZ files e Added option to the Advanced section of the General tab of the Configuration dialog to minimize the main window during exports e Made simplification and smoothing operations work on un selected island areas e Made the aspect ratio always be maintained when saving the 3D view to an image file e Made SVG exports include an id values with a unique number for each exported feature e Updated GPS menu item for sending custom raster maps to a connected Garmin device to have an option to specify the maximum map count This default to 100 but you can increase it for newer units that support more than 100 map tiles e Fixed problem exporting Ozi ozf images to palette based formats e Updated JPG2000 export to internally tile the created image to 1024x1024 tiles e Made Lidar points marked as withheld be automatically marked as deleted on import e Improved vector search dial
411. uilt in access to several new aviation chart GNC ONC TPC and JNC layers through the File gt Download Online Imagery menu command Made rotated line labels be exported to DXF files when exporting line labels to DXF files Include Display Labels as Separate Text Layer option Added new option to the Font selection dialog to control the label fill background mode Now you can force the background to be transparent which allows labels centered on line features to be drawn with no filler behind them if you want e Projection Datum Changes O Added built in support for the MSTM Mississippi Transverse Mercator and New Brunswick Double Stereographic projections as well as a configurable RSO Rectified Skew Orthomorphic projection Added built in support for the ED87 JAD69 Jamaica 1969 and JAD2001 Jamaica 2001 datums Improved accuracy of datum conversions involving the Tananarive datum by using improved conversion parameters from IGN Fixed accuracy problem with ED50 Spain and Portugal and OSGB36 datum conversions very close to and just east of the prime meridian Improved accuracy of datum conversions involving the Bogota Observatory Bogota 1975 datum Allow the Azimuthal Equidistant projection to cover the entire world rather than just half the world around the projection center Added support for users to add their own EPSG codes definitions or modify the existing ones by modifying the epsg_codes txt file in the Global Mapper
412. up the outside color of displayed vertices to make them easier to see on dark backgrounds Fixed problem with crashes exporting from online elevation sources Made the simplification reduction of area features not create self intersecting areas Made some PDS imagery files that use floating point samples for single band imagery like from NASA s LRO mission display properly Sped up exports to Arc ASCII Grid files from large numbers of input files Fixed error saving workspaces and Global Mapper Package files when new areas with islands have been created in a layer Made the feature info dialog display the description for a layer from the Control Center as the Map Name rather than the original description Fixed RasterOverlay cpp error loading some JP2 and ECW files with 16 bits per color channel Improved display of arrows to the ends of lines for thick lines and fixed width lines Fixed download of WCS data in projections other than lat lon WGS84 Added support for NITF imagery using tiled JPEG compression code M3 Swap the drawing for area and line rectangles to by anchored at the top left by default and switched to center anchored if the T key is pressed Made most view shed parameters be remembered between runs Fixed cropping to lat lon boundary for polar stereographic projections Fixed bug updating the elevations for selected vertices on the Vertices dialog for a feature previously it was just setting the elevation to
413. upport for interrupting the draw of a large raster layer by pressing the ESC key Updated KML super overlay export to work better with transparent layers Removed warnings about unknown attributes during S 57 imports Fixed problem importing some S 57 files resulting in crossing lines and lines with gaps Fixed problems in v11 00 connecting to online data sources through some proxy servers Made map catalog loads report any files that cannot be found Updated Lowrance LCM export to include water label points for any labeled water areas Updated the ECW 64 bit export to multiply your target compression ratio by 0 6 so that the end results are comparable to the 32 bit ECW export with the same target compression ratio Fixed one half sample spacing shift of raster elevation layers when exporting them to a new raster format with vector data included Fixed error when doing Lowrance USR export this started with v11 00 release Made workspace and script files show up in the normal File gt Open Data File dialog Made Select From checkbox options on the Vector Display tab of the Configuration dialog always reset to checked when you start a new instance of Global Mapper rather than being remembered Added new option to Google Maps and Bing Maps Virtual Earth exports to allow skipping empty tiles Added option to map catalog dialog to allow using a non default drawing style Added option to DigitalGlobe export to allow using premium un watermarked
414. use Clarke 1858 ellipsoid rather than International 1909 1924 Corrected Indian 1954 datum to use Everest 1830 1936 adjustment ellipsoid Corrected EPSG code assigned to Reykjavik 1900 datum Updated SAD69 datum to prefer EPSG code 6618 as the old code 6291 is deprecated Updated save of WKT PRJ files based on NAD83 or NAD27 datums to use GeogCS name expected by Esri products Also store UTM ProjCS as Esri expects for those datums Made projections using Yards and Indian Yards save to WKT PRJ files Updated handling of Web Mercator projections Mercator with WGS84 Auxiliary Sphere Google Maps datum to be stored how Esri products expect in both WKT PRJ format and GeoTIFF headers e Online Source Changes O O O Added support for loading data from INSPIRE WMS servers commonly used in Europe which are based on WMS 1 3 0 Only show one error message when trying to access a WMS source that is offline rather than several messages Fixed problems loading from some WFS sources e Format Specific Changes O Added support for creating a map catalog GMC from selected area features with an attribute that contains a URL of an associated file for each area When you zoom in far enough that the map is needed it is downloaded from the URL and then loaded automatically This allows you to have a single map catalog reference a huge online database of data Updated CSV export to have option to specify the digits of precision allow use o
415. used in the command line when exporting MrSID files and using a cartridge license server on the network Update MrSID exports to embed the WKT projection string in the SID file header if the projection datum could not be fully stored in the GeoTIFF tags in the header This allows for projections to be stored that aren t fully describable in GeoTIFF tags Updated GML import to remove the prefixes from attribute names like slip All prefixes are removed except for osgb and gml if they won t result in duplicate attribute names Fixed problem with toc xml files for ECRG format files being overwritten by a Global Mapper map catalog when closing the layer Added option in Advanced section of General tab of Configuration dialog to control whether or not to use geometry columns when importing from MS SQL Server databases Made date fields in DBF Shapefiles be formatted using the current system local date settings rather than always MM DD YYYY Added support for using PRJ files for DWGs Improved export of imagery from a map catalog GMC draped on top of terrain for 3D PDF export It will now maintain the full resolution of the data in the map catalog Made 3D PDFs export XY units as meters to match the vertical units so the elevations aren t exaggerated due to unit inconsistencies Updated KML KMZ export so that if a KML folder attribute default of KML_FOLDER exists but is empty the feature will be exported at the top level rath
416. utomatic styling and type assignment from http www census gov geo www tiger tgrshp2007 tgrshp2007 html o Added support for loading Vulcan3D triangulation files o Added support for exported loaded gridded elevation data to Vulcan 3D triangulation 00t files o Added support for loading OpenStreetMap OSM format vector maps o Added support for loading NITF data sets using JPEG2000 compression o Added option to directly export the results of the triangulation and gridding of loaded vector layers from the Overlay Control Center to Global Mapper Grid files rather than loading them in the main map view thus allowing larger areas to be triangulated and gridded at once without memory issues o Added ability to add per vertex elevations to features that don t already have them o Made the vertex display dialog automatically highlight all vertices that are selected in the dialog on the map o Made the Search by Attributes Name dialog automatically highlight all of the result features that are selected on the map o Added support for exporting loaded point features to TomTom OV2 format files for creating new point databases for loading onto TomTom GPS devices o Added support for exporting loading vector data to Delft 3D ldb format files o Added option to KML KMZ vector export to make labels for line and area features display on the map in Google Earth o Added option when generating elevation grids from vector data to ignore zero elevat
417. values in loaded vector data using the ATTR_TO_COPY parameter for EDIT_VECTOR script commands o Made the EDIT_VECTOR command work for User Created Feature layers o Added support for exporting ESRI format hdr files for BIL export by adding a USE_ESRI_HDR YES parameter to the EXPORT_ELEVATION script command o Added support for POLYGON_CROP_FOLDER_ATTR parameter to add an attribute name as a folder name when cropping to a list of area from a file o Added support for adding lat lon columns to CSV exports with an ADD_LAT_LON YES parameter o Added support for adding fading to raster KML KMZ exports using KML_FADE_EXTENT_MIN and KML_FADE_EXTENT_MAX parameters for EXPORT_RASTER script command o Added support for specifying quality for JPEG in TIFF exports using QUALITY parameter o Added support for exporting DTED files with the EXPORT_ELEVATION script command o Added support for only exporting vector layers to package files using the VECTOR_ONLY parameter for EXPORT_PACKAGE commands Updated Lidar import to support filtering out any types of returns rather than just keeping them all or just ground shot points Updated PDF export to include clickable hot spot links for any point features with a LINK attribute pointing to a web page or local file Updated Shapefile export to add option to split the exports based on the feature display label or any attribute value previously you could only split on feature type or description Updated Sty
418. ver data not lining up properly Fixed problems using New Zealand Map Grid with any datum other than NZGDA49 Renamed some datums i e ED50 and OSGB36 to make them shorter and reflect their more common usage Fixed problem loading new format WKT PRJ files with a datum using a meridian other than Greenwich i e the NTF Paris datum Added support for decoding Vertical Near Sided Perspective projections from OziExplorer map files Fixed bug using the Aitoff Wagner projection Added centifeet hundredths of feet as an elevation unit for export e Made further improvements to triangulation and gridding to allow even larger data sets to be gridded When gridding 3D point data sets using the File gt Open Generic ASCII Data File menu command made the elevation specific options like tightness threshold and grid spacing appear on a separate dialog after selecting the ASCII options Added option to make specified export bounds be exactly maintained at the expense of the specified sample spacing the reverse is the default to the Advanced section of the General tab of the Configuration dialog Allowed map catalog files to be added to existing map catalog files In these cases all files referenced in the map catalog being added will simply be added to the map catalog they are being added to Added Save As button on the map catalog options dialog to allow changing the filename associated with a map catalog Added new SPOT Natural Colo
419. version tables for the best possible accuracy Fixed problems parsing degree projection attributes from GeoPDF files that aren t just straight decimal numbers i e 69 W rather than 69 Allowed Equidistant Conic B projections to be saved to WKT PRJ files Fixed problems in v13 00 release with Old Israeli Datum MGI Croatia Serbia MGI Slovenia Kertau 1948 Malaysia and S 42 Azerbijan Georgia datums Corrected Bursa Wolfe transformation parameters provided as part of a TOWGS84 part of a PRJ file The rotation angles had been reversed for small O rotation angles Fixed extraction of projection information from ESRI aux xml files Fixed issue with very large i e over 20 000 000 meters magnitude or so false easting or northing values in MapInfo files Made the elevation units for vector files default to the units of provided projection if the elevation units are not explicitly specified Fixed problem using Stereo70 projection with a datum other than S 42 Pulkovo 1942 e Digitizer Tool Changes O Added option to allow cropping any loaded features to one or more selected area features to the right click menu of the Digitizer Edit Added display of the length of each segment when displaying the vertex list for a feature with the Feature Info or Digitizer Edit tool and also allow for editing the length Also make the selected segment be highlighted on screen Added option to Digitizer Tool to allow editing the length
420. version of files that span multiple zones The auto selection option will be at the top of the zone list for those zones where it is available Export Gridding Changes o Added option when gridding data on export into adjacent tiles to make those tiles overlap by some percentage of the tile size This is to allow more easily overlaying the data in other non mapping applications like Photoshop o Added option when gridding data on export and separately naming tile rows and columns to specify the start number or letter for the rows and or columns rather than just using 1 and A o Added option when gridding data on export into a specified number of rows and columns to crop the right and bottom grid cells to the specified export bounds This may make the grid cells not all have the same size but will prevent extraneous data from appearing on the right and bottom edges o Changed naming of numeric rows columns when gridding data on export to make the numeric name for every tile be padded with 0 s to the maximum length of the numeric label for any row column For example if 100 columns of tiles were being exported the columns names would go 001 002 100 rather than 1 2 100 o Made most settings on the Gridding tab of exports be remembered between runs o Added option when gridding data on export to not export grid tiles where the destination file already exists This is useful for continuing a canceled export or re exporting just
421. vertices from the vertex dialog Added option to the Advanced section of the General tab of the Configuration dialog to Disable Display of Pan Arrows on Map Edge allowing one to disable the map edge pan arrows displayed in most tools When using the File gt Rectify Imagery menu command to rectify and export images maintain the DPI if available of the original image and create GeoTIFF files with an alpha channel if the source image has transparency Improved handling of layer translucency when exporting Global Mapper package files Fixed bug decoding custom point symbol names with multi part names like DOT_EMPTY VERT_BAR DIAG_CROSS etc Updated display of most error messages to include the build version and to also copy the error text to the Windows clipboard for easy pasting Updated import of 3D face features from DXF files to automatically mark them as Tin Face areas so they will export by default as 3D Face features to new DXF files Added options to control whether or not LAYER and ELEVATION attributes are added to MapInfo MIF MID and TAB MAP exports Fixed option to default to exporting screen bounds work even if you don t activate the Export Bounds tab during an export Sped up the load of MrSID LIDAR files when loaded in preview mode Added support for specifying area border widths as a fixed width in meters Made export of 3D area Shapefiles using loaded elevation layers work when done using the EXPORT_VECTOR command in a s
422. w options dialog to turn off the terrain surface display This can be useful if you want to have a terrain surface available for adding relative offsets to 3D vector features but you don t want to display the surface Made area crop operations more tolerant of self intersecting and other invalid polygons Added option to load files directly from a URL in an attribute value from the Feature Info dialog Just right click on the attribute value with the URL to the file to load Global Mapper will then download it and load it as a new layer Allow for print header and footers containing ampersand characters Before they were turned into underscores unless you used a double ampersand Updated vector search dialog to do a better job of sizing columns based on the data Updated vector search to only search on those layers in a map catalog that are already loaded This prevents lockups searching on map catalogs where only some of the maps are loaded Fixed creation of equal value areas with a list of colors to match to and an allowed color fuzziness Previously only the exact colors were matched and the fuzziness ignored Updated save of GPS waypoints to add attributes for fix type PDOP and number of satellites Fixed decoding of GPS waypoints from a NMEA stream with GPWPL sentences Updated batch convert to Shapefile to use lower case extension for all generated files rather than upper case e Ignore per vertex elevation lists for area and line features t
423. wers as well as simple operators like absolute value minimum value and maximum value of 2 values o Added option to adjust the elevation shader colors based on just the elevations in the current view There is a new option on the Vertical Options tab of the Configuration dialog to enable this behavior It allows easily pulling out localized elevation differences when you zoom in to an area with small relief changes relative to the entirety of the loaded data o Added support for passing variables on the command line to a script You can provide the variable after the script gms filename itself on the command line in the form var name var_value For example global_mapper exe c my_path my_ script gms my var my_var_ value New Supported Formats O Added support for importing and exporting 3D PDF files Underlying data format in PDF 3D Annotations may be U3D or PRC We do not support the less common PRC format at this time LIDAR MODULE ONLY Added support for loading E57 Lidar files Added support for CMIP5 HDFS5 data sets with sea surface temperatures Added support for loading text files with the coordinates stored as ECEF Earth Centered Earth Fixed coordinates The Coordinate Format drop down on the ASCII Text Import dialog has an option to specify that the coordinates are ECEF Added support for GCP control point files with the pixel coordinates specified as a percentage value rather than an absolute pixel coor
424. with a list of things that can be selected e Added support for specifying an override of the rectification method inside a GCP file with a line of format Method method_name like Method Polynomial or Method Affine e Added option when creating new line types or editing existing custom types to have those lines drawn as fat lines like roads are when you zoom in on them e Made the feature info dialog remember its location on screen e Fixed issues adding WMS sources with a at the end of the URL WHAT S NEW IN Global Mapper v13 1 e Significant New Features o Added new network licensing option with borrow feature and concurrent seat access o Added support for geospatial PDF import export to 64 bit builds o Added ability to select which layer s to load from a geospatial PDF file o Added ability to load multi page geospatial PDF files with geo positioning information Significantly sped up depression filling step when generating watersheds drainage areas Added new built in Topo Maps category to File gt Download Online Imagery Data menu command and added new Brazilian Topo Map source to the list Added built in access to land cover datasets like NLCD for the US and CORINE for Europe using the File gt Download Online Imagery Data menu command Added support for generating roughness grids from land cover layers by right clicking on a land cover raster or grid layer in the Control Center and selecting the option to generating
425. world A built in roughness tab for calculating roughness grids from the ESA 2009 data is also included Added prompt for dimension values for streaming WMTS sources that have customizable variables like a time date for NASA GIBS sources so you can pull down imagery from whatever date you need Fixed problems with using WMS sources set to not draw with tiles and also using the option to limit the zoom level range they display at The data was still downloading even at zoom scales it wasn t requested Fixed error using WMS sources with a negative resx or resy tag value in the layer definition Improved status reporting when sources are down so that you can get additional information about what is going on with a data source without having to contact technical support Added new Export Online Sources Use Same Scale Logic as Draw option to Advanced section of General tab of Configuration dialog so that the zoom scale selection logic works the same for online layers when exporting and drawing If unchecked draws will skew more towards the lower resolution layer when scale is between 2 zoom scales on the online server while exports will pick up the more detailed layer sooner If checked then both exports and draws use the draw behavior e Format Specific Changes O Added support for Adobe ISO 32000 Geospatial Extensions to PDF and 3D PDF export GEM Module Only Improved loading of IHS Well 297 298 files so that directio
426. xed error from v11 00 with some polynomial 4 point image rectifications Corrected DXF imports and exports to treat color index 0 as black not white Added option to disable the alpha channel for raster layers on the Band Setup tab of the Options dialog for the layer This is useful for layers with bad alpha channel values Added support for loading KML files with multiple alternate names for the lt Placemark gt tag e Added support for disabling automatic export of BigTIFF formatted files when exporting to very large GeoTIFF files from a script by adding a DISABLE_GEOTIFF YES parameter e Added support for 16 bit Vertical Mapper clutter grc files e Fixed problem with text size on elevation legend and distance scale saved to PDF files e When creating view sheds from selected point features made the attributes of those selected point features be copied over to the new tower point that is created WHAT S NEW IN Global Mapper v11 00 e Significant New Features O Created native 64 bit version of Global Mapper allowing users of 64 bit versions Windows to work with much larger data sets Added support for exporting loaded data directly to geo enabled PDF files This includes keeping all vector features as separate entities rather than rasterizing them Added support for directly loading PDF GeoPDF format files Added support for exporting loading vector data to DWG format files Built in DigitalGlobe imagery access was update
427. y to GeoTIFF files Added support for decoding Irish Grid projections from Ozi map files Added support for Dutch Grid projections in ECW files Fixed bug selecting UTM zones in the Southern Hemisphere in the 64 bit version Added EPSG codes for Corregre Alegre and Nord Sahara 1959 UTM projections Corrected latitude for Japanese Grid Zone IV projection Added support for EPSG code 2056 Swiss Grid CH1903 LV95 Fixed bug in v11 01 that caused custom datum transformation parameters to be lost in some cases o Fixed positioning of GeoPDF files using Southern UTM zones e Updated ECW and JPEG2000 access to be much faster when sub sampling for export or rectifying either of those types e Updated option that calculates and adds elevation attributes for selected areas to also calculate and add MAX SLOPE AVG_SLOPE and MODE_ELEV attributes for selected line features e Made selecting a feature with a GM_LINK attribute with the Feature Info tool open the file referenced by the attribute value in the current Global Mapper instance e Added option for users to choose which DWG version to create when exporting a new DWG format file e Allow specifying a prefix and suffix for labels when setting up labeling using multiple attributes for a layer e Added support for modifying the folder that user data is stored in by adding a registry key O O O 0 0 O O Oe OnVO Ors Oy O value with the desired path at HKEY_CURRENT_USER Software Global Ma
428. ymbol to get rotated and scaled symbols typically arrows from the attributes of point features The Quiver Plot functionality is available on the Point Styles tab of the Options dialog for a point layer as well as from the Attribute or Create Point Features right click submenu of the Digitizer Tool Added new option to Vertical Options tab of the Configuration dialog to set up hill shading using multiple different light directions This allows you to create a shaded elevation map that is less dependent on the light direction azimuth that you set up Added support for using attribute based styles based on the description and type of features on the Styles tabs of the Options dialog for a vector layer Dramatically sped up feather blending of raster terrain layers when feathering to complex polygon boundaries with a large number of vertices Made generated lat lon grid lines with the Position Display Format set to DMS or DM trim any zeroes off of the end of the formatted coordinates so you don t get unnecessary precision Made 3D view display the currently rendered data on a flat surface if no terrain data is available Added option to 3D view options dialog to control whether or not 3D vector features are drawn both in space and reflected on the terrain surface By default they are also drawn on the terrain surface as they show in the top down view Now you can turn that off so they only show in space if you want Added support for displaying

What`s New page

Contents

Download Pdf Manuals

Related Search

Related Contents