Linn Komponent 120 Subwoofer
Contents
1. English Francais Deutsch Espa ol Italiano Nederlands HAs KOMPONENT 120 BASS EXTENSION LOUDSPEAKER OWNER S MANUAL Important Safety Information English Important Safety Instructions Explanation of symbols used on the rear or underside of the apparatus dangerous voltages within the enclosure of sufficient magnitude to cause N This symbol is intended to alert the user to the presence of uninsulated electric shock A This symbol is intended to alert the user to the presence of important operation maintenance and servicing information in the instruction and service manuals For apparatus connected to the mains electricity supply CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE COVER NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL REPLACE THE MAINS FUSE IN THE PLUG WITH ONE OF THE SAME TYPE AND RATING DISCONNECT SUPPLY CORD BEFORE CHANGING FUSE WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE SHOCK HAZARD DO NOT OPEN MAINS PLUGS This apparatus is supplied with a non rewireable mains plug for the intended country Replacement mains leads can be obtained from your Linn retailer Should you need to change the plug please dispose of it carefully A plug with bared conductors is dangerous if engaged in a live socket The Brown wire must be connected to the Live Line supply pin The Blue wi2. If you wish to dispose of this product and the product still functions please consider recycling reusing it by donating it to a charity shop selling it or part exchanging it with your retailer CE Declaration of Conformity Linn Products Ltd declare that this product is in conformance with the Low Voltage Directive 73 23 EEC and Electromagnetic Compatibility 89 336 EEC as amended by 92 31 EEC and 93 68 EEC The conformity of the designated product with the provisions of Directive number 73 23 EEC LVD is proved by full compliance with the following standards Standard number Date of issue Test type EN60065 2002 General requirements Marking Hazardous radiation Heating under normal conditions Shock hazards under normal operating conditions Insulation requirements Fault conditions Mechanical strength Parts connected to the mains supply Components Terminal devices External flexible cords Electrical connections and mechanical fixings Protection against electric shock Stability and mechanical hazards Resistance to fire The conformity of the designated product with the provisions of Directive number 89 336 EEC EMC is proved by full compliance with the following standards Standard number Date of issue Test type EN55013 2001 Conducted emissions EN55013 2001 Absorbed emissions EN55020 2002 Immunity FCC notice NOTE This equipment has been tested and found to comply with the limits for a Class B digital device
3. sent to the other speakers Low pass frequency 1 to 4 default is 3 Decreasing the setting lowers If set to 4 all frequencies the highest frequency are passed through i e produced by the unit no filtering of the signal takes place For use when the KOMPONENT 120 speaker is connected to a power amplifier see Connecting section If a power amplifier is not used leave set at 5 KOMPONENT 120 5 Owner s Manual LINN English Guarantee and Service Guarantee and Service This product is guaranteed under the conditions which apply in the country of purchase and your statutory rights are not limited In addition to any statutory rights you may have Linn undertake to replace any parts which have failed due to faulty manufacture To help us please ask your Linn retailer about the Linn warranty scheme in operation in your country In parts of Europe the United States of America and some other markets extended warranty may be available to customers who register their purchase with Linn A warranty registration card is included with the product and should be stamped by your retailer and returned to Linn as soon as possible Alternatively you can register your warranty online at www linn co uk Warning Unauthorised servicing or dismantling of the product invalidates the manufacturer s warranty There are no user serviceable parts inside the product and all enquiries relating to product servicing should be referred to au
4. stop low bass notes being sent to the main speakers Connecting to another KOMPONENT sub loudspeaker KOMPONENT 120 KOMPONENT 120 FILTERED LINE OUTPUT m pa D wur FROM STEREO PRE AMP LINE INPUT m FR0M CLASSIK MOVIE DI FROM OR OTHER AV PROCESSOR STEREO PRE AMP FILTERED FILTERED OUTPUT OUTPUT LINE LINE OUTPUT OUTPUT LINE INPUT Once all the other connections have been made connect the KOMPONENT 120 loudspeaker to a mains supply using the mains lead provided KOMPONENT 120 2 3 Owner s Manual LINN English Cleaning Operating modes and Parameters Cleaning Disconnect the KOMPONENT 120 loudspeaker from the power supply before cleaning Remove dust and fingerprints with a soft dry cloth Avoid using domestic cleaning products on the unit Operating modes SYMBOL Standby The unit is waiting for an audio signal In this mode the unit consumes minimal power The unit will enter standby mode ten minutes after audio input ceases The unit is fully powered up The unit will enter this mode as soon as it receives an audio signal Thermal The unit has overheated Standby During very demanding sustained use the unit will go into Thermal Standby mode in order to allow itself to cool down When in this mode the unit will not produce any sound The unit will return to On mode when its temperature has dropped to its operating level Paramet
5. eplacing the fuse in the KOMPONENT 120 speaker voltage Should the mains fuse blow replace it only with an equivalent part see table LINN below The fuse holder is located just below the mains inlet socket To replace the fuse disconnect the product from the mains supply remove the fuse using uP DOWN FEATURE a flat blade screwdriver insert a new fuse If the fuse blows a second time there O is a fault in the product contact your local retailer Fuse selection table 100V 125V T6 3AL 7 115V 125V T6 3AL 230V 250V T3 15AL KOMPONENT 120 Owner s Manual o Connecting English Connecting IMPORTANT Do not turn on the mains supply until you have connected all other components Connecting to an AV processor CLASSIK MOVIE DI KOMPONENT 120 OR AV PROCESSOR FILTERED PRE OUT OUTPUT LEFT LEFT FRONT SURROUND CENTRE O om cm Pus RIGHT RIGHT FRONT SURROUND se Connecting to a stereo pre amplifier if used with large full range frequency response loudspeakers FILTERED OUTPUT LINE OUTPUT LINE INPUT L _ FROM STEREO PRE AMP gt Connecting to a stereo pre amplifier and power amplifier if used with small limited bass response loudspeakers TO POWER AMP L _ FROM STEREO PRE ANP J NOTE In the above configuration the KOMPONENT 120 loudspeaker is being used to
6. ers The KOMPONENT 120 loudspeaker is equipped with four adjustable parameters features that enable you to alter its performance to suit your taste NOTE The parameters can only be adjusted when the KOMPONENT 120 loudspeaker is not in standby mode Adjusting the parameters To select the parameter you wish to adjust Hold FEATURE O Repeatedly press UP or DOWN until the letter for the desired parameter appears Release FEATURE Repeatedly press UP or DOWN to change the setting NOTE A few seconds after releasing the last key the display changes to To restore the factory defaults Disconnect the KOMPONENT 120 loudspeaker from the mains supply and wait for the display to go blank e While holding FEATURE reconnect the mains supply e Continue to hold FEATURE until the display shows H e KOMPONENT 120 Owner s Manual LINN Parameters English Main parameters Gain volume 1 to 7 default is 4 If you wish to increase the volume of the KOMPONENT 120 loudspeaker compared with your other loudspeakers increase the setting If you wish to lower the volume decrease the setting Phase O or 1 default is 0 Depending on your seating distance from the KOMPONENT 120 loudspeaker and your other loudspeakers you may attain better sound quality by switching this setting High pass frequency 1 to 9 default is 5 Increasing decreasing the setting reduces increases the amount of bass
7. lish Unpacking Voltage selection and Positioning Unpacking Positioning The KOMPONENT 120 loudspeaker is supplied with the following accessories The KOMPONENT 120 loudspeaker can be placed anywhere you find convenient but please consider the following points mains lead h lead Pano ss F 2 O For best results position your KOMPONENT 120 loudspeaker as close as wall mounting bracket kit i A b spike kit possible to either your left front or right front loudspeaker It can be floor mounted shelf mounted or using the bracket supplied wall t of fl tect set of floor protectors mounted warranty card this manual wall bracket assembly instructions O Experimenting with the position may be necessary in order to match the sound of the KOMPONENT 120 loudspeaker with other loudspeakers in your system and the acoustics of the room We recommend that you retain the packaging in case you need to transport the KOMPONENT 120 loudspeaker at a later date Whichever mounting method you employ ensure that the KOMPONENT 120 is Voltage selection held or positioned rigidly in order to ensure that the movement of the drive units is converted to sound energy rather than cabinet movement in the form of vibration wobble etc WARNING Ensure the mains supply is disconnected The KOMPONENT 120 is factory set for a 230 volt mains supply and must not be connected to a mains supply other than this before it is adjusted for your local R
8. lug need replacing and you are competent to do this proceed as follows If you are in doubt contact your Linn retailer or a competent electrician Disconnect the plug from the mains supply Cut off the plug and dispose of it safely A plug with bared conductors is dangerous if engaged in a live socket Only fit a13 Amp BS1363A approved plug with a 5 Amp fuse The cable wire colours or a letter will be marked at the connection points of most quality plugs a b c d Attach the wires securely to their respective points The Brown wire must go to the Live pin the Blue wire must go to the Neutral pin and the Green Yellow wire must go to the Earth pin Before replacing the plug top ensure that the cable restraint is holding the outer sheath of the cable firmly and that the wires are correctly connected WARNING THIS APPLIANCE MUST BE EARTHED e Waste Electrical and Electronic Equipment WEEE Directive Directive 2002 96 EC of the European Parliament and of the Council The symbol left is shown on this product It indicates that the product should not be disposed of with regular household waste but should be disposed of separately Electrical and electronic equipment can contain materials that are hazardous to the environment and human health and therefore should be disposed of at a designated waste facility or returned to your retailer for the appropriate recycling to take place see www linn co uk for further information
9. pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help KOMPONENT 120 Owner s Manual E Z Z Copyright and Acknowledgements English Copyright and Acknowledgements Copyright O 2004 Linn Products Ltd First edition December 2004 Linn Products Limited Glasgow Road Waterfoot Eaglesham Glasgow G76 OEQ Scotland United Kingdom All rights reserved No part of this publication may be reproduced stored in a retrieval system or transmitted in any form or by any means electronic mechanical photocopying recording or otherwise witho
10. re must be connected to the Neutral supply pin The Green Yellow wire must be connected to the Earth Ground supply pin Please contact your retailer or a competent electrician if you are in any doubt GENERAL SAFETY INSTRUCTIONS nap mn 10 Tl 12 13 14 15 16 17 18 19 20 21 22 23 Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use the apparatus near water for example near a bathtub washbowl kitchen sink laundry tub in a wet basement near a swimming pool etc Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Site the apparatus so that its location or position does not interfere with its proper ventilation For example the apparatus should not be situated on a bed sofa rug or similar surface that may block the ventilation openings or placed in a built in installation such as a bookcase or cabinet that may impede the flow of air through the ventilation openings Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarised or grounding type plug A polarised plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safe
11. thorised retailers only Technical support and information For technical support product queries and information please contact either your local retailer or one of the Linn offices opposite Full details of your local retailer distributor can be found on the Linn web site www linn co uk Important O Please keep a copy of the sales receipt to establish the purchase date of the product O Please ensure that your equipment is insured by you during any transit or shipment for repair Linn Products Limited Glasgow Road Waterfoot Eaglesham Glasgow G76 OEQ Scotland UK Phone 44 0 141 307 7777 Fax 44 0 141 644 4262 Helpline 0500 888909 Email helpline linn co uk Website www linn co uk Linn Incorporated 8787 Perimeter Park Boulevard Jacksonville FL 32216 USA Phone 1 904 645 5242 Fax 1 904 645 7275 Helpline 888 671 LINN Email helpline linninc com Website www linninc com Linn Deutschland GmbH Albert Einstein Ring 19 22761 Hamburg Deutschland Phone 49 0 40 890 660 0 Fax 49 0 40 890 660 29 Email info linngmbh de Website www linn co uk Y KOMPONENT 120 Owner s Manual LINN
12. ty If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and at the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Use only with the stand tripod bracket or table specified by the manufacturer or sold with the apparatus Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug has been damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Wall or ceiling mounting Mount the apparatus to a wall or ceiling only as recommended by the manufacturer Power sources Connect the apparatus to a power supply only of the type described in the operating instructions or marked on the apparatus Mains plug Use the mains plug to disconnect the apparatus from the mains supply The mains plug must be accessible at all times Use the mains switch if applicable when the apparatus is not in use Power lines An outdoor antenna should be located away from power lines Outdoor antenna grounding If an outdoor antenna is connected to the apparat
13. us ensure that the antenna system is grounded to provide some protection against voltage surges and static build up In the USA see article 810 of the National Electrical Code ANSI NFPA 70 concerning installation requirements Telephone line Do not connect the apparatus to a telephone line except where specifically instructed to do so Objects and liquid entry Do not let objects or liquids fall into the apparatus Do not expose the apparatus to dripping or splashing Do not place a vessel containing liquid on top of the apparatus No naked flame sources such as lighted candles should be placed on the apparatus The apparatus has been designed for use in moderate and tropical climates KOMPONENT 120 Owner s Manual z LINN English Important Safety Information UK USERS PLEASE READ THIS IMPORTANT SAFETY INFORMATION Fuse replacement This appliance is fitted with a non rewireable 13 Amp mains plug The plug contains a 5 Amp fuse If the fuse has blown it can be replaced as follows a Pull out the red fuse cover carrier b Remove and dispose of the blown fuse c Fit anew 5 Amp BS1362 approved fuse into the carrier and push the carrier back into the plug Always ensure the fuse cover is fitted If the fuse cover is missing do not use the plug Contact your Linn retailer to obtain a replacement fuse cover Fuses are for fire protection and do not protect against electric shock Mains plug replacement Should your mains p
14. ut the prior written permission of the publisher Trade marks used in this publication Linn and the Linn logo are registered trade marks of Linn Products Limited KOMPONENT CLASSIK and UNIDISK are trade marks of Linn Products Limited The information in this manual is furnished for informational use only is subject to change without notice and should not be construed as a commitment by Linn Products Limited Linn Products Limited assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual Part No PACK 1029 KOMPONENT 120 Owner s Manual z LINN Introduction English Introduction KOMPONENT is a revelation in loudspeaker design Delivering an authentic playback experience KOMPONENT combines astounding performance with its own contemporary style designed to complement your living environment Whether your passion is for music or movies KOMPONENT effortlessly handles the audio All loudspeakers in the system have been designed to be free standing or installed on a wall e g alongside a flat screen TV It is recommended that KOMPONENT is partnered with a Linn disc player such as CLASSIK Movie Di or one of our UNIDISK universal disc players for an optimised home theatre experience The KOMPONENT System KOMPONENT 120 Bass Extension Loudspeaker KOMPONENT 110 KOMPONENT 106 ze Centre KOMPONENT 104 SY Sy KOMPONENT 120 Owner s Manual LINN Eng
Download Pdf Manuals
Related Search