SB425 User Manual - Legacy Power Conversion
Contents
1. Using Battery Indicator O This illuminates during utility failure indicating that the battery is ASING supplying power to the battery power supplied outlets Battery Backup and Surge Protection Outlets Provides three battery powered and surge protected outlets for connected equipment to insure temporary uninterrupted operation during a power failure and against surges and spikes Surge Protection Outlets Provides three surge protected only outlets for connected equipment on against surges and spikes Wiring Fault Indicator This LED indicator will illuminate to warn the user that a wiring problem wining exits with the AC outlet such as bad ground miss ground or reversed FAULT wiring If this is illuminated the user is advised to disconnect all electrical equipment from the outlet and have an electrician check the outlet to insure proper wiring Circuit Breaker Reset for Overload Protection RESET Circuit breakers provide optimal overload protection When overload occurs the circuit breaker will switch to battery mode You will need to reset the circuit breaker so UPS will provide the power from utility Serial Port to PC This port allows connection and communication from the DB 9 serial or USB port on the computer to the UPS unit The UPS communicates its en status to the SeeUPS2020 software This interface is also compatible with the UPS service provided by Windows NT Windows 2000 and Windows XP2. User s Manual Legend SB425 KO1 1120007 00 LEGACY TABLE OF CONTENTS IMPORTANT SAFETY WARNINGS nennen eenen eneen enenen ener enenenen 1 INSTALLING YOUR UPS SYSTEM nennen een enen venen enen eeen enen 2 Sel aC A Cee ee ee er ee 2 HARDWARE INSTALLATION GUIDE eenen ee 2 FRONT PANEL AND REAR PANEL DESCRIPTION ences 2 TROUBLE STOO TUNG 2 sonates ertestes Sacer Saeeomne tse caweieesae ai sonereaegiedpateeies eens 4 TECHNICAL SPEGIFIGATIONS arssserororisoeesndansberononsonentdtakbeserbinadeentdndeteasmaaantenns 5 DEFINITION FOR ILLUMINATED LED INDICATORS eee 6 LIMITED WARRANTY osorsorvoesere veer EEE E E 7 Thank you for purchasing a Legacy Power Conversion Product To enjoy all the features and benefits of this Uninterruptible Power System UPS please read and follow all installation and operation instructions completely The accompanying SeeUPS2020 software saves data closes open applications and automatically shuts down your computer system in an intelligent and orderly manner Legend SB425 Uninterruptible Power System IMPORTANT SAFETY WARNINGS SAVE THESE INSTRUCTIONS This manual contains important instructions that should be followed during installation and maintenance of the UPS and batteries Please read and follow all instructions carefully during installation and operation of the unit Read this manual thoroughly before attempting to unpack install or operate CAUTION UPS m
3. Operating Temperature 32 F to 95 F 0 C to 35 C Operating Relative Humidity 0 to 95 NON CONDENSING SeeUPS2020 Software LEGACY DEFINITIONS FOR ILLUMINATED LED INDICATORS Using Battery On Off On Off On Off WIRING FAULT Wiring Fault On Off On Off Set ES On Off Condition Normal Utility Failure The UPS is providing battery power to the Battery Power Supplied outlets Utility Failure The UPS is providing battery power The rapid beeps indicate the battery will run out of charge within a few minutes Overload Occurs in the Fulltime Surge Protection Outlets Turn the UPS off and unplug at least one piece of equipment from the UPS Wait 5 seconds reset the circuit breaker and turn the UPS on Overload Occurs in the Battery power Supplied Outlets Turn the UPS off and unplug at least one piece of equipment from the UPS Wait 5 seconds reset the circuit breaker and tum the UPS on Electrical Wiring Fault This indicates a wiring a problem such as a bad ground missed ground or reversed wiring within the AC outlet User is advised to disconnect all electrical equipment from the outlet and have the outlet checked by an electrician Legend SB425 Uninterruptible Power System LIMITED WARRANTY In purchasing SB425 in the United States or Canada the original end user receives a Limited Warranty from Legacy Power Conversion Inc for ease of reading referred to as Legacy T
4. laws of the United States and the State of Wisconsin without reference to conflict of law principles The application of the United Nations Convention of Contracts for the International Sale of Goods is expressly excluded Contact Information Legacy s address is N9246 Hwy 80 South Necedah WI 54646 and its phone number is 608 565 5878 or 800 859 5711 toll free Legacy is the warrantor under this Limited Warranty You may also contact Legacy on the Internet at www lpc ups com E LEGACY FCC Notice This equipment has been tested and found to comply with the limits for a Class B Digital Device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures 1 Reorient or relocate the receiving antenna 2 Increase the separation between the equipment and receiver 3 Connect the equipment into an outlet on a circuit differ
5. 1 SeeUPS2020 Software Disk 1 User s Manual for SeeUPS2020 1 Serial Interface Cable DB 9 1 Serial to USB cable 1 Telephone Cable HARDWARE INSTALLATION GUIDE 1 Connect the equipment to your UPS outlets Items such as copiers laser printers vacuums space heaters or other large electrical devices should not be connected to the UPS Please assure that the total loads of your equipments must be less than the maximum total power load of your UPS 2 Connect your UPS power cord into a two pole three wire grounding receptacle only Please avoid using extension cords and adapter plugs To maintain optimal battery charge leave the UPS plugged in at all times 3 Press the UPS power button to turn it on The Power On indicator will be illuminated in Green 4 Install your optional software and accessories To use the software simply connect the enclosed serial interface cable to the serial port on the UPS and an open serial port on the computer BASIC OPERATION FRONT PANEL AND REAR PANEL DESCRIPTION Pecos _el le Legend SB425 Uninterruptible Power System Power Switch 9 Press the power button to turn the UPS ON or OFF Power On Indicator co This LED is illuminated when the utility condition is normal and the UPS POWER outlets are providing clean power free of surges and spikes ON
6. Ethernet RJ 45 Network Protection Ports These ports are the protection for your computer network cable modem or telephone LEGACY TROUBLESHOOTING Problem Possible Cause Solution Recharge the battery by leaving the Batteries are not fully charged UPS plugged in The UPS does not perform expected runtime The UPS will not turn on Outlets do not provide power to equipment SeeUPS2020 is inactive all icons are gray Battery is slightly worn out The on off switch is designed to prevent damage by rapidly turning it off and on The unit is not connected to an AC outlet The battery is worn out Mechanical problem Circuit breaker is tripped due to overload Batteries are discharged Unit has been damaged by a surge or spike The serial cable is not connected The serial cable is connected to the wrong port The unit is not providing battery power The serial cable is not the cable that was provided with the unit Contact Legacy Power Conversion about replacement batteries at service lpc ups com or 800 859 5711 Turn the UPS off Wait 10 seconds and then turn the UPS on The unit must be connected to a 110 120v 60Hz outlet Contact Legacy Power Conversion about replacement batteries at service lpc ups com or 800 859 5711 Contact Legacy Power Conversion about replacement batteries at service lpc ups com or 800 859 5711 Turn the UPS off and unplug at
7. cable warranty imposed by law and b all Limited Warranty requirements have been met Legacy will repair or replace the Product if it proves to be defective in material or workmanship during the Warranty Period LEGACY Making a Limited Warranty Claim To make a Limited Warranty claim on a Product you must do the following 1 Complete and return the Legacy Warranty Registration Card or provide reasonable proof of purchase for example a sales receipt that establishes you as the Initial Customer the original end user consumer purchaser of the Product and prove that the Product was purchased within three 3 years of the event for which you want to make a claim for warranty service 2 Call Legacy at 608 565 5878 or 800 859 5711 toll free write to Legacy Power Conversion at N9246 Hwy 80 South Suite 7 Necedah WI 54646 or e mail Legacy at service lpc ups com within ten 10 days of the event for which you want to make a claim 3 When you contact Legacy identify the Product the Purchase Date and request Return Materials Authorization RMA information from Legacy 4 Pack and ship the Product to Legacy as instructed in your RMA Show the RMA code on the shipping label or include it with the Product You MUST prepay all shipping costs and you are responsible for packaging and shipment Legacy will inspect and examine the Product within ten 10 days of receipt If the Product is not as warranted Legacy will repair o
8. d installation of the Product and Connected Equipment 3 Has properly installed and operated the Legacy Product and Connected equipment 4 Has operated the Product at all times within the limitations on the Products VA capacity as stated in this User Manual Legend SB425 Uninterruptible Power System Legacy Does Not Cover or Undertake Any Liability in Any Event for Any of the Following 1 Loss of or damage to data records or software or the restoration of data or records or the reinstallation of software 2 Damage from causes other than AC Power Line Transients spikes or Surges on properly installed grounded and code compliant 120 volt power lines in the United States and Canada transients surges or spikes on standard telephone land lines PBX telephone equipment lines or Base 10T Ethernet lines when properly installed and connected This exclusion applies for example to fluctuations in data transmission or reception by CATV or Therefore transmission or fluctuations or by transients in such transmission 3 A from any circumstance described as excluded above with respect to the product 4 Damages from fire flood wind rain rising water leakage or breakage of plumbing abuse misuse or alteration of either the product or the Connected Equipment Exclusion of Consequential and Other Damages The sole and exclusive remedies of the Initial Customer are those provided by the Limited Warranty Legacy excludes any liabi
9. ent from that to which the receiver is connected 4 Consult the dealer or an experienced radio TV technician for help Any special accessories needed for compliance must be specified in the instruction CAUTION A shielded type power cord is required in order to meet FCC emission limits and also to prevent interference to the nearby radio and television reception Itis essential that only the supplied power cord be used Use only shielded cables to connect I O devices to this equipment CAUTION Any changes or modifications not expressly approved by the guarantee of this device could void the user s authority to operate the equipment E LEGACY For more information contact us at Legacy Power Conversion Inc N9246 Hwy 80 South Suite 7 Necedah WI 54646 Tel 800 859 5877 Fax 608 565 5879 Email sales lpc ups com Web www lpc ups com Entire contents copyright 2006 Legacy Power Conversion Inc All rights reserved Reproduction in whole or in part without permission is prohibited 11
10. equired for Limited Warranty coverage but note if you do not complete a registration card you will be required to provide proof of purchase as described below to have the benefits of this Limited Warranty LIMITED WARRANTY Legacy warrants to you the Initial Purchaser that the Product will be free from defects in material and workmanship for three years from the date of original purchase subject to the terms of this Limited Warranty This Limited Warranty gives you specific rights and you may have other rights which vary from State to State or Province to Province Any Implied Warranty of Merchantability or for Fitness for a Particular Purpose if applicable to the Product is limited in duration to the period of ownership by the Initial Customer This provision shall NOT create any Implied Warranty or Merchantability or of Fitness for a Particular Purpose that would not otherwise apply to the Product NOTE Some States and Provinces do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you To be covered you must still be the owner of the Product at the time of the failure that results in the claim made under this Limited Warranty Exclusive Remedies Under Limited Warranty Your exclusive remedy and Legacys sole obligations are as follows for the Product If a the Legacy Product you purchased and still own is defective in material or workmanship under this Limited Warranty or any appli
11. he Limited Warranty is intended to be the original end user s exclusive rights and remedies Limited Warranty The original end user referred to as the Initial Customer receives an express limited warranty referred to as the Limited Warranty for the SB425 purchased from Legacy referred to as the Product The Limited Warranty is for the Product itself The Limited Warranty is subject to the terms set forth below Additionally State or Provincial law may adjust the terms of the Limited Warranty or the State or Province may impose additional obligations or additional implied warranties To the extent necessary to comply with those laws the terms of the Limited Warranty should be read to adjust to those requirements only to the extent necessary to comply with such local law If you are an Initial Customer you are asked to read the following terms and conditions carefully before using the Product By using the Product you consent to be bound by and become a party to the Limited Warranty If you do not agree to the terms and conditions of the Limited Warranty you should return the Product for a full refund prior to using it REGISTRATION Legacy requests that you complete and return the Warranty Registration Card enclosed with the Product or register the Product at its website www lpc ups com to establish that you are the Initial Customer of the Product and therefore entitled coverage under the Limited Warranty Registration is not r
12. least one piece of equipment Wait 10 seconds reset the circuit breaker and then turn the UPS on Allow the unit to recharge for at least 4 hours Contact Legacy Power Conversion about replacement batteries at service lpc ups com or 800 859 5711 Connect the serial cable that came with the UPS to the UPS and an open serial port on the back of the computer Check the back of the computer for another serial port Move the cable to this port Shutdown your computer and turn the UPS off Wait 10 seconds and turn the UPS back on This should reset the UPS You must use the cable that was included with the UPS for the software and the unit to communicate Legend SB425 Uninterruptible Power System TECHNICAL SPECIFICATIONS Capacity VA Capacity Watts Input Voltage Range 100Vac 140Vac Frequency Range On Battery Output Voltage On Battery Output Frequency Transfer Time Typical Overload Protection On Utility Circuit Breaker On Battery Internal Current Limiting Surge Protection and Filtering Lightning Surge Protection Internet Ready DSL Phone RJ11 RJ45 One In One Out FAX Modem Protection J11 One In One Out Physical Total of UPS Receptacles Maximum Dimensions 23 8cm x 8 0cm x 13 5cm Weight 5 0kg Battery Sealed Maintenance Free Lead 12V AAH x 4 Acid Battery Typical Recharge Time Indicators Power On Using Battery Wiring Fault Audible Alarms On Battery Low Battery Overload
13. lity for personal injury under the Limited Warranty Legacy excludes any liability for direct indirect special incidental or consequential damages whether for damage to or loss of property loss of profits business interruption loss of information or data This exclusion applies even though damage or loss is caused by negligence or other fault NOTE Some States or Provinces do not allow the exclusion or limitation of incidental or consequential damages so the above limitation may not apply to you DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT OR OTHER HIGH RISK ACTIVITIES Legacy does not sell the Products for use in high risk activities The Product is not designed or intended for use in hazardous environments requiring fail safe performance including the operation of nuclear facilities aircraft navigation or communication systems air traffic control weapons systems life support or medical applications or for use in any circumstance in which the failure of the Product could lead directly to death personal injury or severe physical or property damage or that would affect operation or safety of life support device collectively High Risk Activities Legacy expressly disclaims any express or implied warranty of fitness for High Risk Activities Legacy does not authorize use of any of its products use in any High Risk Activities ANY SUCH USE IS IMPROPER AND IS A MISUSE OF LEGACY PRODUCTS The Limited Warranty is governed by the
14. r replace the Product and return it to you at Legacy s expense or if Legacy is unable to or decides not to repair or replace the Product if defective within a reasonable time Legacy will refund to you the full purchase price you paid for the Product purchase receipt showing price paid is required CONDITIONS TO THE LIMITED WARRANTY The Limited Warranty is the only and the exclusive express warranty of Legacy with respect to the Product This exclusion of other express warranties applies to written and oral express warranties LIMITATION THE LIMITED WARRANTY DOES NOT COVER The Limited Warranty is intended to exclusive rights and remedies and replace any other rights to the extent allowed by law As to the Legacy Product the limited warranty does not cover or apply to misuse modification operation or storage outside environmental limits for the Products in transit in shipment or in storage damage or deterioration improper operation or maintenance or use with items or equipment not designed or intended for use with the product The Limited Warranty Does Not Apply Unless The Initial Customer 1 Has properly connected the Product and the Connected Equipment to properly wired and grounded outlets including compliance with electrical and safety codes of the most current electrical code ANS NFPA 70 without the use of any adapters extension cords of other connectors 2 Has provided a suitable and proper environment for use an
15. ust be live parts inside can be energized by the battery even when AC outlet with fuse or circuit breaker protection DO NOT plug unit into an outlet that is not grounded CAUTION DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT Legacy Power Conversion does not sell products for life support or medical applications DO NOT use in any circumstance that would affect operation or safety of any life support equipment with any medical applications or patient care CAUTION The battery can energize hazardous live parts inside even when the AC input power is disconnected CAUTION To prevent the risk of fire or electric shock install in a temperature and humidity controlled indoor area free of conductive contaminants Please see specifications for acceptable temperature and humidity range CAUTION To reduce the risk of electric shock do not remove the cover except to service the battery No user serviceable parts inside except for the battery CAUTION To avoid electrical shock turn off the unit and unplug it from the AC power source before servicing the battery or installing a computer component CAUTION DO NOT USE WITH OR NEAR AQUARIUMS To reduce the risk of fire do not use with or near aquariums Condensation from the aquarium can cause the unit to short out LEGACY UNPACKING Inspect the UPS upon receipt The box should contain the following 1 UPS Unit 1 User s Manual for UPS 1 Warranty Registration Card
Download Pdf Manuals
Related Search