ADS-TST Trailer Socket TesterUSER MANUAL
Contents
1. ADS TST Trailer Socket Tester USER MANUAL Operating Instructions 1 Connect the 13 pin plug to the Vehicles Trailer Socket LED 1 Permanent Power will illuminate to indicate connection Note This connection is required for the Self Test function to operate 2 Take the handset into the drivers compartment ensuring that the connection lead is free from hazard and not entangled 3 With the display visible press the self test button on the side of the handset and ensure all the LED s 1 to 10 are illuminated 4 Switch on the ignition LED 10 Ignition Power Earth should illuminate 5 Operate the vehicle controls in the normal way and check that the corresponding LED s 1 through to 10 illuminated Not part of the UK MOT Test 1 Permanent Power 6 Reversing Light 2 Left Indicator 7 Brake Light 3 Left Side Light 8 Right Side Light 4 Brake Light 9 Right Indicator 5 Fog Light 10 Ignition Power Earth Note Checks on Permanent Power LED 1 and Reversing Light LED 6 are not currently required for the UK MoT Test Issue date Jan 2010 On some vehicles equipped with CAN Bus systems it is normal for the LED s on the TST 100 display to flicker Important Always ensure that the Connection Cable is free from hazard and not entangled Do not attempt to move or drive the vehicle with the ADS TST connected 7 Pin Trailer Socket Testing When testing 7 Pin Vehicle Systems always use a Suitable 13 pin to2. 7 pin adaptor Note 7 Pin Vehicle Systems do not have a 12 volt Permanent Power LED 1 will not illuminate and the Self Test function will not operate Maintenance Clean handset and cable frequently with a clean dry rag and a mild detergent spray Follow Manufacturers instructions when using a detergent Do not use Petrol Oil Solvent based or Abrasive products Regularly inspect Connection Lead and Plugs for wear and damage Replace as required Always store the ADS TST carefully in a dry place free from oil or water ingress
Download Pdf Manuals
Related Search